Consul - Top Flush Suite...95 ASTRA FRONT FLUSH TECHNICAL DRAWING 190 820 185 690 405 195 9 5 360...
1
Consul - Top Flush Suite PRODUCT CODES WHITE SUITE: XTCOT08A SUITE-CONSUL TF-WHI COLOUR SUITE: XTCOT**A SUITE-CONSUL TF-** CISTERN: CU0708A CISTERN-BIBO TF-WHI CU03**A CISTERN-BIBO TF-** PAN: TC0408A PANS-CONSUL-WHI SEAT: STCL1W** SEAT-CLUB WHITE MECH FMFFBW01 MECH-UNIVERSAL FRONT FLUSH (WIRQ) CLOSE COUPLE | CLOSED RIM | FRONT FLUSH WEIGHT OF PAN: 21.7kg WEIGHT OF CISTERN: 11.7kg CISTERN WATER CAPACITY: 9l PAN FLUSH VOLUME: 3/6l PAN WIDTH: 360mm PAN HEIGHT: 400mm CISTERN WIDTH: 340mm CISTERN HEIGHT: 415mm COMBINED HEIGHT: 840mm INSTALLED MAX LENGTH: 685mm The Consul top flush is a close-couple, closed rim suite. CONSUL SUITE INSTALLATION GUIDE: 1. Fit inlet valve and flushing mechanism, as per manufacturer’s instructions. 2. Attach cistern to pan using fixation bolts. 3. Fit seat, use the manufacturer’s instructions. 4. Place the pan with cistern on flat (even) surface for best results. 5. Make markings on floor surface, for drilling of fixation holes (pan). 6. Remove pan and cistern, drill holes into concrete floor. 7. Slide outlet of pan onto bung of outlet pipe fitted by a qualified plumber. 8. Attach pan to floor using screw fixations. 9. Connect to the water supply. Technical Specs AVAILABLE COLOURS: WH 360 150 340 340 415 685 840 415 178 400 155
Transcript of Consul - Top Flush Suite...95 ASTRA FRONT FLUSH TECHNICAL DRAWING 190 820 185 690 405 195 9 5 360...
-
Consul - Top Flush Suite
PRODUCT CODES
WHITE SUITE: XTCOT08A SUITE-CONSUL TF-WHI COLOUR SUITE: XTCOT**A SUITE-CONSUL TF-**
CISTERN: CU0708A CISTERN-BIBO TF-WHI CU03**A CISTERN-BIBO TF-**
PAN: TC0408A PANS-CONSUL-WHI SEAT: STCL1W** SEAT-CLUB WHITE MECH FMFFBW01 MECH-UNIVERSAL FRONT FLUSH (WIRQ)
CLOSE COUPLE | CLOSED RIM | FRONT FLUSH
WEIGHT OF PAN: 21.7kgWEIGHT OF CISTERN: 11.7kgCISTERN WATER CAPACITY: 9lPAN FLUSH VOLUME: 3/6lPAN WIDTH: 360mmPAN HEIGHT: 400mmCISTERN WIDTH: 340mmCISTERN HEIGHT: 415mmCOMBINED HEIGHT: 840mmINSTALLED MAX LENGTH: 685mm
The Consul top flush is a close-couple, closed rim suite.
CONSUL SUITE INSTALLATION GUIDE:
1. Fit inlet valve and flushing mechanism, as permanufacturer’s instructions.
2. Attach cistern to pan using fixation bolts.
3. Fit seat, use the manufacturer’s instructions.
4. Place the pan with cistern on flat (even) surface forbest results.
5. Make markings on floor surface, for drilling of fixationholes (pan).
6. Remove pan and cistern, drill holes into concrete floor.
7. Slide outlet of pan onto bung of outlet pipe fittedby a qualified plumber.
8. Attach pan to floor using screw fixations.
9. Connect to the water supply.
Tech
nica
l Spe
cs
AVAILABLE COLOURS:
WH
ASTRA FRONT FLUSH TECHNICAL DRAWING
190
820
185
360
160
690
415 190
375
190
690
405
195
95
ASTRA FRONT FLUSH TECHNICAL DRAWING
190
820
185
160
690
415 190
375
190
690
405
195
95
ASTRA FRONT FLUSH TECHNICAL DRAWING
190
820
185
360
160
690
415 190
375
190
690
405
195
95
ASTRA FRONT FLUSH TECHNICAL DRAWING
190
820
185
690
405
195
95
360
150
340
340
415
685
840
415
178
400
155
![WAC 415 - 02 CHAPTER - Washingtonleg.wa.gov/CodeReviser/WACArchive/Documents/2015/WAC 415 - 02... · (2/27/14) [Ch. 415-02 WAC p. 1] Chapter 415-02 Chapter 415-02 WAC GENERAL PROVISIONS](https://static.fdocuments.us/doc/165x107/5ad016617f8b9aca598d40d7/wac-415-02-chapter-415-0222714-ch-415-02-wac-p-1-chapter-415-02.jpg)
