CONSTRUCTION ENGINEERING TECHNOLOGY...Bachelor of Technology Degree in Construction Engineering...
Transcript of CONSTRUCTION ENGINEERING TECHNOLOGY...Bachelor of Technology Degree in Construction Engineering...
NEW YORK CITY COLLEGE OF TECHNOLOGY OF
THE CITY UNIVERSITY OF NEW YORK
PROPOSAL TO ESTABLISH A PROGRAM IN
CONSTRUCTION ENGINEERING TECHNOLOGY LEADING TO THE
BACHELOR OF TECHNOLOGY DEGREE (B TECH)
EFFECTIVE FALL 2012
SPONSORED BY THE DEPARTMENT OF CONSTRUCTION MANAGEMENT
& CIVIL ENGINEERING TECHNOLOGY
APPROVED BY
NEW YORK CITY COLLEGE OF TECHNOLOGY GOVERNANCE April 6, 2010
FINAL
January 17,2012
College Representative: Interim Dean Kevin Hom, R.A. School of Technology & Design
Contact: Dr. Bonne August Provost and Vice President for Academic Affairs Telephone: (718) 260‐5560 Fax: (718) 260‐5542 Email: [email protected]
Provost Signature: ______________________________________________ Bonne August
Bachelor of Technology Degree in Construction Engineering Technology
Table of Contents
PAGE ABSTRACT 3 PURPOSE AND GOALS 3 NEED AND JUSTIFICATION 4‐7 STUDENTS
A. Interest/Demand B. Enrollment Projections C. Admission Requirements
7‐8
CURRICULUM 8‐13 COST ASSESMENT
A. Faculty B. Facilities and Equipment
14
EVALUATION 14‐15 APPENDICES: APPENDIX A COURSE DESCRIPTIONS APPENDIX B SYLLABI FOR NEW COURSES APPENDIX C PROGRAM SCHEDULING (SED Form) APPENDIX D FACULTY TEACHING ASSIGNMENTS (SED Form) APPENDIX E FACULTY TO BE HIRED (SED Form) APPENDIX F NEW RESOURCES TABLE (CUNY) APPENDIX G PROJECTED REVENUE TABLE (CUNY ) APPENDIX H SUPPORTING MATERIALS FOR PROJECTED REVENUE TABLE (CUNY) APPENDIX I FIVE YEAR FINANCIAL PROJECTION (CUNY TABLE) APPENDIX J FACULTY CURRICULA VITAE APPENDIX K ARTICULATION AGREEMENT(S) (CUNY) APPENDIX L LETTERS FROM EMPLOYERS APPENDIX M APPLICATION FOR REGISTRATION OF A NEW PROGRAM (SED)
16‐23
24‐57
58‐60
61‐66
67‐68
69‐70
71‐72
73‐78
79‐82
83‐102
103‐109
110‐115
116‐126
Bachelor of Technology Degree in Construction Engineering Technology
1
I. ABSTRACT
The Department of Construction Management & Civil Engineering Technology (CMCE) of New York City College of Technology (NYCCT) proposes to offer a new Bachelor of Technology Degree (BTech) in Construction Engineering Technology. The proposed degree would articulate with our current Associate in Applied Science (AAS) degree in Civil Engineering Technology and the AAS degree in Construction Management Technology in a 2+2 sequence. Currently, there is no Bachelor of Technology Degree in Construction Engineering Technology being offered within the City University of New York (CUNY) system. Articulation is also anticipated with other associate degree programs at City Tech, such as Architectural Technology, as well as programs from CUNY community colleges. The Department of Construction Management & Civil Engineering Technology has signed an articulation agreement with the Borough of Manhattan Community College where the AS degree in Engineering Science will articulate with the proposed BTech in Construction Engineering.
II. PURPOSE AND GOALS
A. Purpose The purpose of the BTech degree in Construction Engineering Technology is to expand and enhance our students’ expertise in construction management and civil engineering technology beyond the associate degree level. Building on the skills and knowledge acquired through the AAS degree programs, students who complete the BTech in Construction Engineering Technology will have comprehensive knowledge of field operations; the ability to employ sophisticated systems, tools, and software; and experience in interdisciplinary work environments.
Key features of the program include: 1. Advanced coursework in engineering technology analysis and design; 2. A broad background in current building codes and national construction safety standards; 3. In‐depth knowledge of sustainable and green design; 4. Introduction to quality assurance and risk management practices; 5. Experience utilizing sophisticated computer software in areas such as building information modeling (BIM),
global positioning systems (GPS), and geographic information systems (GIS); 6. Project‐based learning with real world applications in the senior capstone course; 7. Exposure to interdisciplinary work environments through shared coursework with the Architectural
Technology and Facilities Management departments
B. Rationale The American Society of Civil Engineers (ASCE) publishes an annual Report Card on the nation’s infrastructure. Overall, our nation’s roads and bridges scored a “D”. ASCE reported that 42% of New York’s bridges are structurally deficient or functionally obsolete and 46% of New York’s major roads are in poor or mediocre condition.1 In response to new construction, maintenance, and rehabilitation of the region’s aging infrastructure, construction management professionals in the Metropolitan area will continue to be in high demand, particularly in the public sector.
With construction projects becoming increasingly schedule‐driven, complex, and cost conscious, employers are seeking individuals who are able to manage these challenges immediately and with minimal additional training. This is a marked change from the traditional career path in which individuals in the construction field would progress towards upper level construction management positions through on‐the‐job training. By earning a bachelor’s degree in Construction Engineering Technology, our graduates will meet these needs with a more advanced and comprehensive skill set as outlined above. Graduates of the proposed BTech degree will also be eligible to pursue master’s degrees in disciplines such as Real Estate Development, Construction Management, Civil Engineering, and Facilities Management. This will further advance their skill set and open up more career paths.
1 ASCE Report Card on America’s Infrastructure: http://www.infrastructurereportcard.org/state‐page/new‐york
Bachelor of Technology Degree in Construction Engineering Technology
2
C. Goals
The primary goal of the proposed BTech degree is to provide a seamless path to an advanced degree for students who have completed the A.A.S. degree in either Construction Management or Civil Engineering Technology. This primary goal is supported by the following supporting goals:
Supporting Goals • Develop a broader and more technical skill set to meet employer needs • Provide additional training and certification to satisfy construction contracts • Offer an education that is accessible and affordable
III. NEED AND JUSTIFICATION
The proposed Bachelor of Technology (BTech) degree in Construction Engineering Technology will meet the needs of the students, college, and community and will also offer an advanced degree that will allow graduates to pursue a professional career in construction and engineering.
A. The Students
In addition to providing an upper division program for graduates of City Tech’s AAS programs in Construction Management and Civil Engineering Technology, the proposed BTech program will provide an opportunity for students with similar educational backgrounds both within NYCCT and outside institutions to earn an affordable bachelor degree. Crossover training will be available to students who are admitted from several City Tech programs including Architectural Technology, Environmental Technology, and Facilities Management Technology. At this time, there are few affordable options for our students to continue their education. Department research has indicated that only two programs in the Metropolitan area offer a bachelor’s degree in Construction Management (NYU‐Polytechnic University and Pratt Institute) and one program offers Construction Engineering Technology (New Jersey Institute of Technology). These programs offer courses only during the weekdays since their graduate programs are offered in the evening. A majority of our student population must work part‐time or full‐time during the week to support themselves and their families. The proposed BTech degree will provide an accessible means for our students to pursue an advanced degree.
Tuition and fees for the State University of New York (SUNY) schools total over $13,200 for commuters and nearly $42,000 for residential students. Local private institutions range from $27,000 to $39,000 per year for commuter students2. By comparison, CUNY senior college tuition and fees are approximately $5,500 per year, making the proposed BTech one of the most affordable options for students in the New York City area pursuing a bachelor degree in this field.
a. The College
Because students in Construction Management and Civil Engineering Technology currently have limited options to continue their education at NYCCT, a significant amount of students transfer to other institutions to continue their education. In the Fall 2011, twenty seven (27) students graduated from the program. Out of the twenty seven (27), six students (22%) continued on to a bachelor degree program. Of these, only one (1) student enrolled in the Facilities Management bachelor degree program at NYCCT, while the other five (5) graduates transferred to other institutions in the Metropolitan area.
b. The Community The proposed BTech degree will contribute to a variety of specific state needs and new regulation requirements for professional in this field.
2 Education institutions considered were NYU‐Polytechnic University, Pratt Institute, New Jersey Institute of Technology, SUNY Farmingdale, and Manhattan College.
Bachelor of Technology Degree in Construction Engineering Technology
3
i. Ailing Infrastructure
On January 4, 2012, N.Y.S. Governor Andrew M. Cuomo delivered his 2012 State of the State Address, outlining a new "Economic Blueprint" for New York State. The Governor proposes to construct the largest convention center in the nation in Queens, re‐develop the Jacob Javits site, and create the "New York Works Fund" to rebuild New York States Infrastructure. The "New York Works Fund" will support repair or replacement of more than 100 bridges, including the construction of a new Tappan Zee Bridge, repair 22,000 miles of roadways, upgrade 90 municipal water systems, make improvements to 48 state parks and historic sites and repair 114 flood control projects and dams. Additionally, Governor Cuomo proposes an "Energy Highway" System to ensure a reliable power supply, as well as making investments in solar and renewable energy. As a result, New York will see a surge in large‐scale and heavy construction projects. Examples of current long‐term construction projects in the New York City area alone are: the World Trade Center, the Second Avenue Subway, the JFK Airport expansion, the NYC DEP Water Tunnel Number Three and the Highline. Several of the new courses contained in the proposed BTech including the new CMCE 4700 "Heavy Construction Practices" course, will address the design and construction issues that are unique to heavy construction.
ii. Construction Codes and Regulations In July 2009, the New York City Construction Codes and Regulations were adopted. These codes and regulations had not seen a major overhaul since 1968. In response, the department will incorporate ARCH 3662 “Municipal Agencies and the Formal Approval Procedure” into the curriculum. Incorporation of this course will also promote an interdisciplinary learning experience with NYCCT’s architecture students. This type of experience reflects real world project delivery, as engineers and architects often collaborate on projects.
iii. Construction Safety and Health The United States Department of Labor regulates construction safety and health through the Occupational Safety and Health Administration (OSHA) Regulation Standards under “Safety and Health Standards for Construction” (29 CFR Part 1926). Through the proposed course, CMCE 4702 “Construction and Site Safety Management”, our department plans to offer OSHA Certification. This certification is often required by all construction personnel on a site thus making our graduates more marketable to future employers.
iv. Environmental Stewardship Clients are actively seeking designs that make their projects sustainable, intelligent, and integrated. Sustainable projects have become a priority in New York City, and many clients are hoping to obtain the coveted Leadership in Energy and Environmental Design (LEED) Green Building certification. LEED is a third‐party certification program and the nationally accepted benchmark for the design, construction and operation of high performance green buildings. Along this line, both the University and the City have introduced sustainability initiatives, most notably Mayor Michael Bloomberg’s “PlaNYC 2030” which calls for an increase in sustainable design. The CMCE department has chosen an existing course, ARCH 2450 Sustainability through Architecture, offered by the Architectural Technology department to be included in the curriculum.
v. Integrated Technology Building Information Modeling (BIM) is an advanced application of computer aided drafting which enables architects, engineers, facility managers and contractors to work collaboratively and is fast becoming an industry standard. BIM simultaneously models building design, construction and management. CMCE 4473 Building Information Modeling (BIM) will expose students to this integrated approach.
Bachelor of Technology Degree in Construction Engineering Technology
4
CMCE 4410 Land Development & Design and CMCE 4422 Geographic Information Systems (GIS) will offer more sophisticated software that is being currently employed in the day‐to‐day design and management of construction projects. Both courses will build upon the more basic software packages used in CMCE 1322 Route Surveying and CMCE 2410 Construction Drawings III‐ Intermediate CAD.
vi. Legal Issues and Ethical Practice Due to the increasing complexity and resulting greater liability of construction projects, associate degree graduates often need additional training in legal matters and made more aware of their professional and ethical responsibilities. CMCE 4700 Construction Law will help students steer clear of professional liability issues.
c. A Professionally Oriented Program The proposed BTech degree will allow students to pursue a professional career in the Construction Engineering and related fields. Typical salary ranges for a graduate with a bachelor’s degree and less than one year of related experience ranges from $43,000 to $54,0003. Additional job opportunities and example job titles with a brief description are listed below Table 14.
Table 1: Sample Job Titles and Descriptions Job Title Description Construction Engineer
Graduates must have knowledge in all issues related to construction and design. They are responsible for monitoring costs and expenditures throughout projects. They must be highly trained and possess a technical education with a strong background in construction.
Construction Manager
Construction managers oversee all aspects of an entire building or construction project, so organizational skills are pertinent. With the help of an Assistant Manager, they maintain schedules, production outlines, and deadlines for multiple sites.
Contract Administrator
Due to the numerous documents and contracts that must be properly maintained before, during, and after the construction process, administrators are delegated the duties of preparing each piece accurately. They coordinate the ideas of owners, contractors, and designers into clear documents, so they must meet with each on a regular basis to ensure there are no discrepancies. They are also responsible for negotiating any specific details that need to be altered.
Estimator By using a combination of past experiences and project specifications, these associates accurately project the amount of materials, equipment, and man hours that must be utilized in order to complete a given project. Based upon these calculations, they create a project budget that is presented to owners. All necessary details must meet not only legal, but also company policies and guidelines.
Field Engineer
Responsible for daily inspections, field engineers ensure that plans are being properly executed. They are also required to monitor site progress to ensure schedules are being maintained. If problems arise, they need to have a thorough knowledge of concepts and procedures in order to quickly, and often times creatively, find a solution.
Quality Control Manger
Quality goods are an integral part of construction structures, and quality control managers assist with the creation of detailed standards that must be followed. They must have an immense knowledge of construction processes because they are generally called on to inspect many final products to ensure excellence. If failure is detected, they must be capable of advising on solutions.
Safety Director
A keen knowledge of all construction concepts is necessary for these associates. They direct safety programs in an attempt to reduce any hazards or injuries possible during and after the site’s construction. They design each program to meet strict laws and regulations, but often delegate the training responsibilities to others within their company.
3 Salary information as per “Civil Engineer Median Salary by Years Experience” from www.PayScale.com and “The Median Expected Salary for a Typical Field
Engineer I – Construction” from www.swz.salary.com. 4 “Sample Job Descriptions”from http://www.ihireconstruction.com/constructionjobsggcon.asp
Bachelor of Technology Degree in Construction Engineering Technology
5
d. Similar Programs
The City University of New York (CUNY) currently does not offer a BTech in Construction Engineering Technology. As a result, the proposed BTech degree will not overlap or duplicate any degree currently offered by CUNY. In addition, only NYU‐Polytechnic University and Pratt Institute offer a bachelor’s degree in Construction Management, and New Jersey Institute of Technology is the only program in the Metropolitan area that offers a Construction Engineering Technology bachelor’s degree.
B. STUDENTS
a. Interest/Demand A survey of 429 associate degree students conducted in Spring 2010 indicated that 77% would be interested in pursuing the proposed BTech degree in order to stay at NYCCT as opposed to transferring to another college or university. Students indicated that the quality of the faculty, affordability and evening class schedule were the main reasons that they would like to stay at NYCCT.
This leads us to conclude that students would prefer to complete their advanced degree at NYCCT. Those not currently pursuing advanced degrees may be hindered by the cost of tuition elsewhere or the lack of evening and weekend course offerings. The proposed BTech degree will offer an affordable tuition and convenient schedule.
b. Enrollment Projections Based upon the surveys conducted, comparisons with other related departments of similar size, and the trend for requiring a bachelors degree in order for graduates to obtain upper level construction management positions, projected student enrollment in the BTech degree for the next five years is shown in Table 2.
Table
1. The enrollment data is based on a Student Enrollment Survey taken of 424 students taken in the Spring 2010. Year I enrollment is based on 43% of the total student survey total (424 x .42 = 182). This was used as the starting or baseline number for the enrollment projections
2. The values shown above are based on estimates (FT versus PT) using the Spring 2011 Enrollment Statics for both the CM & CV programs: FT = 56% (Average CM + CV) PT = 44% (Average CM + CV)
3. City Tech data was used to estimate the increase in new students for the CMCE between the Fall 2010 and Spring 2010 semesters. Typical student enrollment increase ranged from 14% ‐ 18% (CM + CV). A 16% average was used to project the increase in enrollment in Year II.
4. A 75% retention rate was used to project the number students continuing in the B Tech program. 33% graduation rate was considered. 5. A 20 % rate was used to project the increase in B Tech enrollment in Year III, IV & V.
c. Admission Requirements
Students wishing to enter the Bachelor of Technology in Construction Engineering Technology program can enter the program in several ways. Students who enter the program as freshman must meet the College and University standards. Students applying for admission to a baccalaureate program are evaluated for admission according to a formula that considers preparation in high school English and mathematics, high school average, and College Preparatory Initiative units. Each college of The City University uses such a formula to identify students who currently have the ability to do baccalaureate level work. Additionally, all students must have demonstrated competency in reading, writing and mathematics in order to enroll in baccalaureate degree programs (refer to CUNY Testing information).
YEAR I1 Fall + Spring
YEAR II Fall + Spring
YEAR III Fall + Spring
YEAR IV Fall + Spring
YEAR V Fall + Spring
New Cont. New3 Cont.4 New5 Cont.4 New5 Cont.4 New5 Cont.4 F‐T2 102 0 32 77 37 80 43 78 43 84 P‐T2 80 0 26 60 30 65 35 71 35 54
Sub‐totals 182 0 58 137 67 147 78 149 78 138 Totals 182 195 214 227 216
Bachelor of Technology Degree in Construction Engineering Technology
6
For admissions and advisement purposes, freshman baccalaureate applicants who graduated from high school within the previous academic year are also required to provide the University with scores for the SAT examination. The SAT requirement does not apply to students who completed their secondary instruction outside the United States, who are classified as ESL students or who graduated from high school more than one year before their application to the College.
Students who do not meet these guidelines maybe admitted into the AAS degree in either Civil Engineering Technology or Construction Management Technology and apply for transfer into the BTech program after achieving CUNY proficiency in reading, writing and mathematics. Students who enter the AAS degree in Civil Engineering Technology or Construction Management Technology in a 2 + 2 sequence must achieve a minimum Grade Point Average (GPA) of 2.5 for admittance to qualify for the B Tech program. Students may also enter from other programs either here at City Tech of from other colleges. It is not necessary to have earned an associate degree from these colleges. Transcripts of transfer students will be evaluated to determine the courses they must complete for the Bachelor of Technology degree in Construction Engineering Technology. The department has an articulation agreement with the Borough of Manhattan Community College (BMCC). Students from BMCC who complete the course requirements for the AS degree in Engineering Science will not be required to complete more than 63 credits for the Bachelor of Technology degree.
C. CURRICULUM
The proposed BTech degree will be open to both new and current students. The BTech degree requires the successful completion of 124 credits or 60 additional undergraduate credits beyond the associate degree level. The 2 + 2 requirements for students with an AAS degree in either Construction Management Technology or Civil Engineering Technology are shown in Figure 1 (Pathway). The requirements for the Bachelor of Technology in Construction Engineering Technology are shown in Tables 3 through 6.
The department sought the advice and feedback from our industry Advisory Board which includes professionals from the private and public sectors of civil engineering and construction management. The Advisory Board commented on course offerings and made recommendations concerning construction law and real estate development. Their input was incorporated into the following courses:
• CMCE 4700 Construction Law • CMCE 4415 Real Estate Development Fundamentals
Alumni and Employer Surveys are sent out periodically from the department to determine the level of satisfaction of our graduates and their employers. Their input regarding more advanced construction drawing skills and public works are reflected in the following courses:
• CMCE 4410 Land Development & Design • CMCE 3602 Heavy Construction Practices
The Department will seek accreditation from the Technology Accreditation Commission of ABET Inc. (TAC/ABET) for the Bachelor of Technology Degree in Construction Engineering Technology. ABET is the recognized accrediting body for college and university programs in applied science, computing, engineering, and technology. Currently, our Civil Engineering Technology Associate Degree is accredited by TAC ABET. The department will pursue accreditation of this program in conformance with the requirements of ABET.
Bachelor of Technology Degree in Construction Engineering Technology
7
Figure 1: Pathway for Students Seeking the Bachelor of Technology
AAS Construction Management Technology
Signature
BTECH Construction Engineering Technology
General Education = 24 Major = 40
Additional General Education Credits = 19 Required Major = 32 Elective Major = 9
Total = 64 Total = 60
BTech Construction Engineering Technology
= 124
AAS Civil Engineering Technology
Signature
BTECH Construction Engineering Technology
General Education = 28
Major = 36 Additional General Education Credits = 12
Required Major = 39 Elective Major = 19
Total = 64 Total = 60
Bachelor of Technology Degree in Construction Engineering Technology
8
Table 3: Requirements for the Bachelor of Technology In
Construction Engineering Technology ‐ Construction Management Signature (Following the Current General Education Requirements)
Credits GENERAL EDUCATION (Gen. Ed) 431 REQUIRED MAJOR COURSES: A.A.S. Construction Management Technology 40 ADDITIONAL REQUIRED COURSES: See Table 4B 6 REQUIRED COURSES: Bachelor of Technology Major ‐ See Table 4A 26 REQUIRED ELECTIVES: Bachelor of Technology –– Required Department Electives 0 REQUIRED ELECTIVES: Bachelor of Technology – See Table 4C – Technical Electives 9
Total 124
CONSTRUCTION MANAGEMENT TECHNOLOGY ASSOCIATE DEGREE GEN ED1 Subject Area Credits1
English Composition ENG 1101 3 Behavioral/Social Sciences ECON 1100 Macroeconomics 3
Communications Communications (ENG 1100/1133 or ENG 3770 Series) 3 Literature/Aesthetics/Philosophy Literature/Aesthetics/Philosophy 3 Mathematics2 MAT 1375 & MAT 14752 8 SCI I PHYS 1433 or PHYS 1441*4 4/5
Total Associate Degree General Education 24/25
BACCALAUREATE DEGREE GEN ED1 (In addition to associate degree credits) Subject Area Credits1
Behavioral/Social Sciences See College Catalog Table 2 6 Communications 3 Literature/Aesthetics/Philosophy Literature/Aesthetics/Philosophy 3 Literature ENG 2000/3400 series, AFR,PRS 2000 series 3 Science II PHYS 14343 or PHYS 14425 4/5
Subtotal 19/20
Total Baccalaureate Degree General Education 43/44
Notes: 1. A minimum of 42 – 43 credits of Gen Ed is required for the BTech Degree in Construction Engineering Technology 2. Students are required to complete 2 semesters of calculus for the BTech Degree in Construction Engineering Technology 3. Students must complete 1 year of college physics for the BTech Degree in Construction Engineering Technology 4. Construction Management Students may substitute Physics 1441 & 1442 for Physics 1433 & 1434 5. Physics 1441 & 1442 are calculus based and are 5 credit courses
Bachelor of Technology Degree in Construction Engineering Technology
9
Table 4A: Bachelor of Technology Required Courses Construction Engineering Technology ‐ Construction Management Signature
Course No. Course Title No. Credits
ARCH 2450 Sustainability through Architecture 3
CMCE 3501 Steel Fabrication Detailing 2
ARCH 3662 Municipal Agencies and the Formal Approval Procedure 3
CMCE 3602 Heavy Construction Practices 2
CMCE 4700 Construction Law 3
CMCE 4701 Construction Field Management 3
CMCE 4702 Construction and Site Safety Management 3
CMCE 4800 Senior Capstone Project 3
MATH 1575 Calculus II 4
TOTAL 26
Table 4B: Additional Required Courses for the Bachelor of Technology Construction Engineering Technology ‐ Construction Management Signature
Course No. Course Title No. Credits
CMCE 2322 Route Surveying 3
CMCE 2456 Soil Mechanics 3
TOTAL 6
Table 4C: Bachelor of Technology Technical Electives
Construction Engineering Technology ‐ Construction Management Signature
Course No. Course Title No. Credits
CMCE 4400 Bridge Building Technology 3
CMCE 4401 Special Topics 3
CMCE 4410 Land Development & Design 3
CMCE 4415 Real Estate Development Fundamentals 3
CMCE 4422 Introduction to Geographic Information Systems 3
CMCE 4423 Transportation Engineering Technology 3
CMCE 4456 Foundation Design and Analysis 3
CMCE 4558 Earth Retaining Structures 3
CMCE 4460 Design of Temporary Structures 3
CMCE 4471 Quality Assurance 3
CMCE 4472 Risk Management in Construction 3
CMCE 4473 Building Information Modeling (BIM) 3
Bachelor of Technology Degree in Construction Engineering Technology
10
Table 5: Requirements for the Bachelor of Technology in
Construction Engineering Technology ‐ Civil Engineering Technology Signature Following current general education requirements (Following the Current General Education Requirements)
Credits GENERAL EDUCATION (Gen Ed) 43 REQUIRED COURSES: A.A.S. Civil Engineering Technology Major 36 ADDITIONAL REQUIRED COURSES – See Table 7B 14/166 REQUIRED COURSES: Bachelor of Technology Major – See Table 7A 22 REQUIRED ELECTIVES Bachelor of Technology ‐ See TABLE 7C – Technical Electives 9
TOTAL 124
CIVIL ENGINEERING TECHNOLOGY ASSOCIATE DEGREE CORE1 Subject Area Credits1 ENGLISH ENG 1101 3 BS/SS Elective – See College Catalog Table 2 3
COMM Communications (ENG 1100/1133 or ENG 3770 Series) 3 LAP Literature/Aesthetics/Philosophy 3 Mathematics2 MAT 14754 Calculus II & MAT 1575 Calculus II 8 SCI I & SCI II3 PHYS 1433 & PHYS 14343 or PHYS 1441 & PHYS14425 8/10 Total 28
BACCALAUREATE DEGREE CORE1 Subject Area Credits1 BS/SS See College Catalog Table 2 3
BS/SS Required Department Elective ECON 1101Macroeconomics
3
COMM Communications (ENG 1100/1133 or ENG 3770 Series) 3 LAP Literature/Aesthetics/Philosophy 3 LIT ENG 2000/ 3400 series, AFR,PRS 2000 series 3 Mathematics2 (See Associate Degree Core Above) 0 SCI I & SCI II3 (See Associate Degree Core Above) 0 Subtotal 15
Total Baccalaureate Degree General Education 43
Notes: 1. A minimum of 42 ‐ 43 credits is required for the BTech Degree in Construction Engineering Technology based on the current College catalog (Table 2). 2. Students are required to complete 2 semesters of calculus for the BTech Degree in Construction Engineering Technology 3. Students must complete 1 year of college physics for the BTech Degree in Construction Engineering Technology 4. Students must qualify for MAT 1475 5. Physics 1441 & 1442 are calculus based and are 5 credit courses 6. 14 credits would be required under the current curriculum. CMCE 2420 would be deleted from Table 7B
Bachelor of Technology Degree in Construction Engineering Technology
11
Table 6A: Bachelor of Technology Required Courses Construction Engineering Technology – Civil Engineering Technology Signature
Course No. Course Title No. Credits
ARCH 2450 Sustainability through Architecture 3
CMCE 3501 Steel Fabrication Detailing 2
ARCH 3662 Municipal Agencies and the Formal Approval Procedure 3
CMCE 3602 Heavy Construction Practices 2
CMCE 4700 Construction Law 3
CMCE 4701 Construction Field Management 3
CMCE 4702 Construction and Site Safety Management 3
CMCE 4800 Senior Capstone Project 3
TOTAL 22
Table 6B: Additional Required Courses for the Bachelor of Technology Construction Engineering Technology – Civil Engineering Technology Signature
Course No. Course Title No. Credits
CMCE 1114 Materials & Methods of Construction 3
CMCE 1220 Construction Management I 2
CMCE 2319 Building Service Systems 2
CMCE 2320 Construction Management II 2
CMCE 2412 Estimating 2
Other Elective ACC 1162 Elements of Accounting or MKT 1100 Essentials of Marketing 3
TOTAL 16
Table 6C: Bachelor of Technology Technical Electives Construction Engineering Technology – Civil Engineering Technology Signature
Course No. Course Title No. Credits
CMCE 4400 Bridge Building Technology 3
CMCE 4401 Special Topics 3
CMCE 4410 Land Development & Design 3
CMCE 4415 Real Estate Development Fundamentals 3
CMCE 4422 Introduction to Geographic Information Systems 3
CMCE 4423 Transportation Engineering Technology 3
CMCE 4456 Foundation Design and Analysis 3
CMCE 4558 Earth Retaining Structures 3
CMCE 4460 Design of Temporary Structures 3
CMCE 4471 Quality Assurance 3
CMCE 4472 Risk Management in Construction 3
CMCE 4473 Building Information Modeling (BIM) 3
Bachelor of Technology Degree in Construction Engineering Technology
12
COST ASSESSMENT a. Faculty
The College will have the requisite faculty and staff necessary to initiate this new baccalaureate program. Table 7 outlines the projected staffing needs and costs.
Table 7 Staffing Needs and Costs
Year 1 2 3 4 5 I. Additional Faculty 0 0 0 0 0 II. Additional Staff (CLT) 0 0 1 (56k)5 0 0 III. OTPS $0 $2,000 0 $2,000 $0
5 Includes 33% Full Time Staff Fringe Benefits
b. Facilities and Equipment Over the past two years, the CMCE Department has steadily upgraded its laboratories and computer software & hardware. During the summer of 2011, 24 new desk top computers were installed in the CMCE Department Computer Lab. New Global Positioning System (GPS) and surveying equipment was purchased in 2007 & 2008. In 2008 a GRTI grant was awarded to two of the CMCE faculty for the purchase of an advanced 3D laser scanner. Classroom testing equipment was purchased through a 2007 Perkins Grant. In 2010 and 2011, the Fluid Mechanics Laboratory was upgraded through a capital investment funding of approximately $136,000. The Drafting Laboratory was refurbished in 2008 with additional improvements made to several classrooms on the 4th floor. Projected equipment and software needs are outlined in Appendix F New Resources.
NYCCT will be undertaking a building‐wide master plan study in 2012 to access the needs of each department in the Voorhees building.
c. Library and Instructional Materials In consultation with the NYCCT library staff, materials have been discussed and a listing of the materials is contained in Appendix F New Resources.
d. Budget Tables The department does not anticipate any capital budget expenditures for the first 5 years of the program.
5. INTERNAL EVALUATION AND OUTCOMES The Department of Construction Management and Civil Engineering Technology implemented a Continuous Quality Improvement (CQI) plan in 2001. The CQI plan outlines the assessment, evaluation, frequency of evaluation, coordinators and actions taken to improve student learning to meet the program’s educational objectives. The educational objectives of the department are:
1. Be employed as engineering technicians, inspectors, assistant project managers or CADD operators, 6. Pursue advanced degrees in civil engineering and construction or facilities management, 7. Work towards obtaining professional licensure, and 8. Progress towards management or technical positions in the civil engineering and construction industries.
The department has adopted the student learning outcomes approved by ABET, Inc – the national accrediting body for technology and engineering programs. Our associate degree in Civil Engineering Technology is an ABET accredited program, and it is our plan to work towards the accreditation of the proposed bachelor of technology program. This process will begin by with an update of the CQI to include the ABET student learning outcomes for a bachelor of technology in construction engineering. The student learning outcomes are:
Bachelor of Technology Degree in Construction Engineering Technology
13
1. Producing and utilizing design, construction, and operations documents; 2. Performing economic analyses and cost estimates related to design, construction, and maintenance of systems
in the construction technical specialties; 3. Selecting appropriate construction materials and practices; 4. Applying principles of construction law and ethics; 5. Applying basic technical concepts to the solution of construction problems involving hydraulics and hydrology,
geotechnics, structures, construction scheduling and management, and construction safety; and 6. Performing standard analysis and design in at least one recognized technical specialty within construction
engineering technology that is appropriate to the goals of the program.
Once the CQI is updated, data will be collected, assessed and evaluated over a period of 3‐5 years. Actions will be taken to improve the program, and the department will submit an application to ABET for accreditation. This is the same process that is followed for our associate program. Some highlights from the CQI of actions taken to improve the student learning are:
• Feedback from the department’s Advisory Board (in 2007) indicated that employers are looking for improved communication skills. As a result, faculty incorporated more presentations, papers, and reports in courses. Faculty were also encouraged to emphasize grammar and spelling on all submitted student work.
• Student surveys beginning in 2007 revealed that more students were continuing their education to the bachelor level and would be interested in a program within the department if it were offered. This led to the proposal for bachelor of technology in construction engineering technology.
• In 2008, feedback from graduate surveys has revealed that software used in the classroom was outdated. This led to the incorporation of new software in that was more commonly used in industry in the CMCE 2315, 1210, 2410, and 2351 courses. In particular, the department modified the curriculum to CMCE 1210 and 2410 to progress students towards more advanced applications of computer aided design (CAD).
• In order to better measure student’s ability to conduct standard experiments in soil testing, the department incorporated the National Institute for Certification in Engineering Technologies (NICET) exam. This national, standardized exam gives students certification in soils testing and is used as a credential for employment. The first exam was offered by our department in May 2009.
APPENDIX A - COURSE DESCRIPTIONS
FOR THE
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
CMCE BTECH COURSE DESCRIPTIONS (New) ‐ continued
November 29, 2011
CMCE BTECH COURSE DESCRIPTIONS (New)
The following course descriptions are for the New BTech courses at NYCCT .
CMCE 3501– Steel Fabrication Detailing 4 lab hr, 2 cr Introduction to basic practice of structural steel fabrication details including the machining and detailing of structural steel sections in accordance with the exacting dimensions of detailed steel shop drawings. Topics include preparation of steel design drawings; fabrication equipment; and welding equipment, procedures and inspection. Prerequisite(s): CMCE 1224 or CMCE 2455, CMCE 2315 and CMCE 2410
CMCE 3602 Heavy Construction Practices 2 cl hr, 2 cr Heavy construction projects, such as highways, bridges, railroads, earthwork and pipelines, each have their own unique design and construction challenges. Students will gain a global understanding of the methods, equipment, and procedures used in heavy construction projects. Emphasis is placed on working with multidisciplinary engineers, contractors, and agencies; heavy and automated equipment, environmental impact analysis, sustainability and design life, safety, permitting, and regulations pertaining to heavy construction in the New York City area. Prerequisite(s): CMCE2306, CMCE2415 and CMCE2456 CMCE 4400 Bridge Building Technology 3 cl hr, 3 cr Topics include various bridge geometries such as fixed and moveable, stringer/girder, steel truss, concrete slab, box beam, suspension, and arch bridges. Emphasis will be placed on the unique design considerations and construction
challenges for each bridge type. Case studies of NYC bridges will be used. Prerequisites: CMCE 3501
CMCE 4401 Special Topics in Engineering Technology 3 cl hr, 3 cr (Spring Only) Students will be exposed to a particular technology and/or trend with the goal that they will be better able to adapt in the workplace. Emphasis is placed instilling the need for lifelong learning and understanding professional, ethical and social responsibilities that come with all advancements in technology, engineering, and science. Prerequisite(s): CMCE 3602 CMCE 4410 Land Development and Design 1 cl hr, 4 lab hr, 3 cr Introduction to the process of development on both suburban and urban parcels including federal, state and municipal land use regulations and federal and state regulations regarding environmental issues. The course will cover sustainability issues regarding environmental impact, social cohesion and broader professional requirements. Students will work through a development project from site placement to land survey and prepare a preliminary plan. Prerequisites: CMCE 2322, CMCE 2410
CMCE 4415 Real Estate Development Fundamentals 3 cl hr, 3 cr Students are introduced to the process required to develop and manage five types of real estate products: land, residential, office, industrial, and retail uses. Focusing on small‐scale projects, student will learn practical methods for developing each major type of real
estate, including feasibility analysis, design and construction, financing, marketing, and management. Photos, site plans, diagrams, and case studies provide examples of actual projects and how the process works. Prerequisite(s): CMCE 1224 or CMCE 2455 CMCE 4422 ‐ Geographic Information Systems (GIS) 1 cl hr, 3 lab hr, 3 cr Students will gain a practical knowledge of GIS software and the fundamentals of how GIS marries databases to a spatial framework. The class work will include lectures on topologies, measurement methods, coordinate systems, map projections with practical instruction in the computer lab. Students will draw upon current projects and issues to create maps and provide analysis. Prerequisite(s): CMCE 1322
CMCE 4423 Transportation Engineering Technology 2 cl hr, 1 lab hrs, 3 cr. Students will study the planning, design, construction, operation, and maintenance of highways from the perspective of the transportation engineer. This course builds upon the knowledge and skills gained in the Route Surveying course. Prerequisite(s): CMCE 2410, CMCE 2322
CMCE 4456 – Foundation Analysis & Design 3 cl hrs, 3 cr. This is a continuation of Soil Mechanics. Students will apply soil mechanics principles to the design and analysis of both shallow and deep foundations. Installation and testing methods will also be covered in this course. Case
CMCE BTECH COURSE DESCRIPTIONS (New) ‐ continued
November 29, 2011
histories will be used to illustrate typical design and construction methods. Prerequisite(s): CMCE 2315, CMCE 2415, CMCE 2456
CMCE 4458 – Earth Retaining Structures 3 cl hr, 3 cr Introduction to classical lateral earth pressure theories. Students will apply soil mechanics principles to the design and analysis of earth retaining structures. Design and analysis of cantilever retaining (concrete and steel) walls as well as braced excavations will be studied. Segmental retaining wall (SRW) systems will also be covered in this course. Prerequisite(s): CMCE 2315, CMCE 2415, CMCE 2352
CMCE 4460 ‐ Design of Temporary Structures 3cl hrs, 3 cr Students will be introduced to the design of systems that support construction activities and operations including the determination of design loads during construction and the application of these loads for the design of excavation support systems, earth retaining systems, temporary supports and underpinning, concrete formwork and shoring systems. Prerequisite(s): CMCE 2315, CMCE 2456, CMCE 2415
CMCE 4471 Quality Assurance 2 cl hr, 1 lab hr, 3 cr Topics include: the established quality elements of management responsibility; documented quality management system; design control; document control; purchasing; product identification and traceability; process control; inspection and testing; inspection, measuring, and test equipment; inspection and test status; nonconformance; corrective action; quality records; quality audits and
training, documented in ISO 9000, 9001: 2000 FTA QA/QC Guidelines. Prerequisite(s): CMCE 1220, CMCE 2320 CMCE 4472 Risk Management in Construction 2 cl hrs, 1 lab hrs, 3 cr. Students will learn to identify all risks associated with their specific contractual, financial, operational and organizational requirements. Risk management strategies and risk transfer will be covered. Topics include construction risks & exposures, claims, litigation, construction defect mitigation. Students will learn and develop management strategies to reduce risk. Prerequisite(s): CMCE 1220, CMCE 2320
CMCE 4473 Building Information Modeling (BIM) 3 cl hrs, 3 cr BIM is implemented as part of a comprehensive systems approach to the design, construction, management, operation, maintenance, and use of buildings. Topics will include discussion of how BIM supports more streamlined, integrated, and efficient business processes throughout the life cycle of buildings, from their initial conception through their eventual retirement or reuse. Prerequisite(s): CMCE 4422
CMCE 4700 Construction Law 3 cl hr, 3 cr The writing intensive course introduces students to the areas of the law that they are most likely to encounter in construction. Following an introduction to the legal system and form of legal analysis, areas to be addressed will include contracts, procurement, scope definition, delays and acceleration, site conditions, warranties, termination, tort claims, international issues, dispute resolution, and ethics. Pre‐ or corequisite: CMCE 3601
CMCE 4701 Construction Field Management 3 cl hr, 3 cr To provide the students with a working knowledge of the construction process, responsibilities of different parties, importance of project documentation, and effective work coordination. Details of jobsite layout planning, personnel management and labor relations, dispute resolution and negotiations, long term and short term procurements are discussed. The fundamentals of work progress measurement, time and cost control, and change order management are covered in detail. Prerequisite(s): CMCE 2420 or Departmental Approval
CMCE 4702 Construction and Site Safety Management 3 cl hr, 3 cr To provide the students with a working knowledge of the construction hazards, safety precautions, and effective integration of safety regulations into the design and construction phases. Different types of construction related hazards including crane, equipment and machinery, universal, access, construction, operation, and maintenance hazards together with methods to prevent them from happening are discussed. Prerequisite(s): CMCE 2420 or Departmental Approval
CMCE 4800 – Senior Capstone Project 3 cl hr, 3 cr The senior capstone project is an integrating experience that draws together diverse elements of the curriculum and develops student competence by focusing on both technical and non‐technical skills to solve problems. Students will work in teams to solve a comprehensive problem beginning with conceptual design all the way through to final design, preparation of construction documents and cost estimation. Non‐technical skills such as presentation skills, teamwork, accountability and ethics will be emphasized. Prerequisite(s): CMCE 4700
CMCE BTECH COURSE DESCRIPTIONS (New) ‐ continued
November 29, 2011
ARCH 2450 Sustainability Through Architecture 3 cl hrs, 3 cr Introduction to the fundamentals of sustainability in architecture. The course provides the student with an understanding of global climate change resulting from current waste, water and energy practices, and introduces them to innovative technologies and policies to mitigate this change. Recognizing that sustainable building expertise is becoming widely sought after, this course introduces students to the language and basic green design principles, and to the criteria by which green buildings are measured, assessed and funded. Prerequisites: ARCH 1250 and ARCH 2370 or CMCE 1222 and CMCE 2320, and ENG 1101 (Existing course taught by the Architecture Dept. – Required) ARCH 3662 Municipal Agencies and the Formal Approval Procedure 3 cl hrs, 3 cr The course is an introduction to the process of seeking application and approval from various agencies for the right to construct architecture in New York City. The class explores the interface between the architect and these agencies to assist in the production of architecture in New York City. This course involves the familiarization of the student with the process and scope of the various municipal agencies involved with the construction of a building in an urban area. Prerequisite: ARCH 3561 (Existing course taught by the Architecture Dept. – Required)
EXISTING CMCE COURSE DESCRIPTIONS ‐ continued
EXISTING CMCE COURSE DESCRIPTIONS
The following course descriptions are for existing courses at NYCCT that are to be incorporated into the proposed BTech degree.
CMCE 1104 Statics and Strength of Materials I 2 cl hrs, 2 cr This course provides an introduction to the basic theory necessary for structural analysis and design. It emphasizes the use of standard charts and tables in conjunction with a calculator, for the solution of elementary statics and strength of materials problems. The concepts of force, stress, strain and equilibrium are explored in depth. Student projects include the use of desktop computer programs. Pre‐ or corequisite: MAT 1275 CMCE 1110 Construction Drawings I 1 cl hr, 2 lab hrs, 2 cr This course will introduce the student to the basic drafting techniques that are required in the construction field. Students will learn the proper use of drafting equipment. Through actual drawings and projects, the student will develop an understanding of architectural working drawings relating to wood frame residential buildings and commercial buildings and their use in construction projects. Topics will include drafting techniques and equipment, lettering, line work, geometric constructions, site plans, foundation drawings, floor plans, electrical, plumbing and HVAC plans. Prerequisite: None CMCE 1114 Materials and Methods of Construction I 2 cl hr, 3 lab hrs, 3 cr This course introduces the student to wood and masonry construction and the study of modern building techniques. The student applies the
theory through the construction of a scaled detailed project of a residential dwelling. In addition, the student will be introduced to the basic principles of construction management. Prerequisite: None CMCE 1155 Computer Applications in Engineering Technology 2 cl hrs, 2 lab hrs, 3 cr This course provides a working knowledge of computers and their application in the fields of Construction and Civil Engineering. Topics include microcomputer systems and attendant hardware, computer terminology, disk operating system, (DOS and Windows), word processing programs such as Word, spreadsheets such as Excel and presentation software such as Powerpoint. Visual basic is also introduced in this course. The student will learn how to use these tools to manage construction projects, prepare estimates, work proposals and to present oral presentations. Each topic assignment is based on a specific construction management or civil engineering topic. Prerequisites: certification in reading and writing CMCE 1204 Statics and Strength of Materials II 3 cl hr, 3 cr This course is a continuation of CT 104 and provides additional theory necessary for structural analysis and design. Engineering concepts for shear and bending moment diagrams, section properties, beam analysis and truss analysis are
explored in depth. Student projects include the use of a desktop computer for the solution of beam analysis, section properties and trusses. Prerequisite: CMCE 1104 CMCE 1210 Construction Drawings II – Intro to CAD 2 lab hrs, 1 cr This course provides the students with a basic working knowledge of Computer Aided Drafting. Through the use of residential drawings, students build on their basic knowledge of both civil engineering and construction drawing principles and standards. Methods and procedures are developed for solving practical drafting problems encountered in construction projects using Computer Aided Drafting methods. Students will learn the sequence of commands and/or steps required to start, create, save and plot CAD drawings. Improved skills are also developed in the reading and interpretation of typical working drawings from construction projects. Prerequisite: CMCE 1110
EXISTING CMCE COURSE DESCRIPTIONS ‐ continued
CMCE 1220 Construction Management I 3 cl hrs, 3 cr This course introduces the student to the basic practice of construction management in the erection and construction of a building project. The course is designed to give the student a thorough understanding of the construction process and the elements that comprise this process leading to a successful completion. Topics covered will include the discussion of the design and construction process, types of contracts, responsibilities of participating parties, zoning and building codes, specifications and drawings, construction bidding and award of contracts, law and labor relations, ethics, risk allocation and liability sharing. Prerequisites: CMCE 1110, CMCE 1114, certification in reading and Writing CMCE 1222 Surveying 1 cl hr, 4 lab hrs, 3 cr This course enables students to perform actual surveying work using traditional surveying equipment. Fundamental theory of plane surveying, surveying procedures, including measurements of distances, elevations and direction are studied. Principles and use of field equipment, including tapes, levels, transits, theodolites and electronic distance meters (EDM), field and office work, including traverses, topographic surveys and mapping, construction surveys, earthwork computations, stadia, note‐keeping and office calculations. Computer applications for traverse computations will be covered. Pre‐ or corequisites: MAT 1275, CMCE 1110
CMCE 1224 Materials and Methods of Construction II 1 cl hr, 2 lab hrs, 2 cr This course provides the student with an understanding of the fundamentals of the three major categories of any building construction project namely the foundation, substructure and superstructure. Current methods and materials of construction are emphasized. Topics will include cast‐in‐place and precast concrete frame construction, masonry stone construction, steel frame construction, glass and glazing and curtain wall construction systems. Prerequisites: CMCE 1110, CMCE 1114, certification in reading and writing CMCE 2306 Materials Testing Laboratory 1 cl hr, 2 lab hrs, 2 cr This course will explore the mechanical properties of steel, timber and concrete through laboratory testing. Standard tension, compression, shear, torsion, ductility and bending tests are performed in accordance with ASTM standards. Principles of field inspection of fresh concrete are covered as well. Students are given the opportunity to earn certification by the American Concrete Institute as “Field Inspectors, Level 1, of Fresh Concrete.” Pre‐ or corequisites: CMCE 2315, certification in reading and writing CMCE 2315 Elements of Structural Design–Steel 3 cl hrs, 3 cr This course provides a working knowledge of the basic concepts encountered in the analysis and design of structural steel elements. The American Institute of Steel Construction (AISC) specifications for the design, fabrication and erection of structural steel for buildings are studied, particularly as they apply to the design of beams, columns and connections. Analysis methods and
procedures are developed for solving practical problems encountered in civil engineering. Students will learn to use the charts, tables, design aids and specifications available for simple structural design, which are contained in the “AISC Steel Handbook.” Student projects include the use of desktop computers. Prerequisite: CMCE 1204; Note: Students should not register for both CMCE 2315 and CMCE 2415 simultaneously without departmental approval. CMCE 2319 Building Service Systems 2 cl hrs, 2 cr Analysis of plumbing, heating, ventilating, air conditioning and electrical equipment appropriate for residential and commercial‐industrial buildings are explored. Modern methods and current equipment are emphasized. Pre or corequisite: CMCE 1224 CMCE 2320 Construction Management II 3 cl hrs, 3 cr This course introduces the student to site organization and management techniques that are required in construction project management. Students will gain a thorough understanding of all aspects of field supervision and contract administration. Topics will include field office setup, record keeping, reports, meeting minutes, change orders, measurement and payment, quality control, claims and disputes. Prerequisites: CMCE 1110, CMCE 1220, CMCE 122, CMCE 1224
EXISTING CMCE COURSE DESCRIPTIONS ‐ continued
CMCE 2322 Route Surveying 1 cl hr, 4 lab hrs, 3 cr Theory and practice of route surveying, including horizontal curves, vertical curves, spirals, earthwork, profiles and mapping are covered in this course. Advanced surveying projects in field and office, including computer applications are covered. Prerequisite: CMCE 1152 CMCE 2351 Fluid Mechanics 4 cl hrs, 2 lab hrs, 4 cr Fundamentals of hydraulics for civil engineering technicians, including properties of fluids, fluid statics, manometers, forces on submerged plane and curved surfaces, buoyancy, principles of fluid flow, flow measurements, nozzles, Venturi meters, head losses. Hydraulic problems will be solved using a desktop computer, including commercial and non‐commercial software as well as standard nomographs . Prerequisite: CMCE 1204 CMCE 2352 Soil Mechanics (Laboratory) 2 cl hrs 3 lab hrs, 3 cr This course combines soil theory, field practice and lab procedures. The student will learn the origin and nature of soils, soil classifications, sampling, soil properties, strength characteristics, soil water relationships, settlement and consolidation concepts, lateral earth pressure and subsurface stresses. Methods and procedures are developed for solving practical soil mechanics type problems encountered in civil engineering projects. Laboratory tests, related calculations and computer applications are all incorporated into this course. Pre‐ or corequisites: CMCE 1204, MAT 1375, PHYS 1433
CMCE 2410 Construction Drawings III – Intermediate CAD 1 cl hr, 3 lab hrs, 2 cr This course provides the students with a working knowledge of Computer‐Aided Drafting. Through the use of structural drawings for steel, wood and concrete, students build on their basic knowledge of both civil engineering and construction drawing principles. Methods and procedures are developed for solving practical drafting problems encountered in construction projects using Computer‐Aided Drafting methods. Students will learn the sequence of commands and/or steps required to start, create, save and plot CAD drawings. Prerequisites: CMCE 1110, CMCE 1222; pre‐ or corequisite: CMCE 1224 or CMCE 2455 CMCE 2412 Construction Estimating 1 cl hr, 3 lab hrs, 2 cr This course prepares the student to estimate the cost of various types of construction. A detailed material takeoff is made from typical construction documents. Pricing, including the cost of labor, material, equipment, subcontracts, overhead, contingencies and profit is discussed. Annually updated costs from Means’ “Building Construction Cost Data” are used in preparing the cost estimate. Commercial computer software is used in this class. Prerequisites: CMCE 1220, CMCE 1224 CMCE 2415 Elements of Structural Design–Concrete 2 cl hrs, 2 cr This course provides a working knowledge of the basic concepts encountered in the analysis and design of reinforced concrete elements. The Building Code Requirements for Reinforced Concrete (ACI latest edition) is studied as it applies to the design and analysis of concrete beams, slabs, columns and footings for
buildings. Analysis methods and procedures are developed for solving practical problems encountered in civil engineering. Students will learn to use tables and select design aids for simple structural designs. Basic detailing and inspection criteria are also introduced. Student projects include the use of desktop computers. Prerequisite: CMCE 1204; Note: Students should not register for both CMCE 2315 and CMCE 2415 simultaneously without departmental approval. CMCE 2420 Construction Management III 1 cl hr, 2 lab hrs, 2 cr This course teaches current practices in preparing project schedules, including bar charts and Critical Path Method (CPM). Emphasis will be placed on using industry standard computer scheduling software. Pre or corequisite: CMCE 1255, CMCE 2320 CMCE 2454 Applied Hydraulics 2 cl hrs, 2 cr The student will learn the principles of water supply and sewerage collection and treatment, with an emphasis on NYC’s water supply and sewerage treatment systems. Storm water and sewerage design concepts and theory will be explored as well as elementary hydrology, including surface and aquifer systems. Considerations of pipe flow, minor losses, series vs. parallel pipe systems, pumping systems as well as open channel flow will be covered. Prerequisite(s): CMCE 2351, MAT 1375
EXISTING CMCE COURSE DESCRIPTIONS ‐ continued
CMCE 2455 Materials and Methods of Construction 2 cl hrs, 2 cr Construction materials and methods used in building construction of all public works facilities are studied. Also covered are office and field practices involved in such projects. Current materials, methods and practices of construction using NYC Building and Zoning codes, as well as A.A.S.H.T.O. codes as reference are covered. Introduction to the basic principles of construction management, including the design and construction process, scheduling and contracts. Pre‐or corequisites: CMCE 1110, CMCE 1252 REQUIRED COURSES TAUGHT BY OTHERS: ACC 1162 Elements of Accounting 3 cl hrs, 3 cr Journals, ledgers and the salient features of the accounting cycle. Preparation and interpretation of financial statements, cash and bank reconciliations. This course is not available to accounting or computer systems technology majors. Prerequisite: CUNY proficiency in reading and mathematics
(Taught by the Business Dept (Required Elective)
ARCH 2450 Sustainability Through Architecture 3 cl hrs, 3 cr Introduction to the fundamentals of sustainability in architecture. The course provides the student with an understanding of global climate change resulting from current waste, water and energy practices, and introduces them to innovative technologies and policies to mitigate this change. Recognizing that sustainable building expertise is becoming widely sought after, this course introduces students to the language and basic green design principles, and to the criteria by which green buildings are measured, assessed and funded. Prerequisites: ARCH 1250 and ARCH 2370 or CMCE 1222 and CMCE 2320, and ENG 1101 (Taught by the Architectural Dept. (Required Course) ARCH 3662 Municipal Agencies and the Formal Approval Procedure 3 cl hrs, 3 cr The course is an introduction to the process of seeking application and approval from various agencies for the right to construct architecture in New York City. The class explores the interface between the architect and these agencies to assist in the production of architecture in New York City. This course involves the familiarization of the student with the process and scope of the various municipal agencies involved with the construction of a building in an urban area. Prerequisite: ARCH 3561 (Taught by the Architectural Dept. (Required Course)
MKT 1100 Essentials of Marketing 3 cl hrs, 3 cr Functions involved in distributing goods, the role of the manufacturer in selecting target markets, types of marketing institutions (wholesale and retail). Formulating marketing policies and strategies. The role of government and the effects of consumerism on marketing practices. Prerequisite: CUNY proficiency in Reading
(Taught by the Business Dept (Required Elective) November 29, 2011
APPENDIX B - SYLLABI FOR NEW COURSES
FOR THE
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: September 27, 2011)
1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 3501– Steel Fabrication Detailing Course Description Introduction to basic practice of structural steel fabrication details including the machining and detailing of structural steel sections in accordance with the exacting dimensions of detailed steel shop drawings. Topics include preparation of steel design drawings; fabrication equipment; and welding equipment, procedures and inspection. Prerequisite(s) CMCE 2315 and CMCE 2410 0 class hours, 4 laboratory hours, 2 credits Required Textbook Althouse et al, Modern Welding, The Goodheart Wilcox Co., 2004, 10th Ed, 784pp. ISBN 1566379873 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. producing and utilizing design, construction, and operations documents (Criterion 9.a); b. select and apply the knowledge, techniques, skills, and modern tools of the discipline to steel fabrication
technology (Criterion 3.a); and c. design and assemble typical structural steel units (Criterion 3.d)
Student Evaluations Class Participation 5% Projects 30% Reports 20%
Quizzes 30% Final Exam 15%
Final Grade = 100%
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: September 27, 2011)
2
Class Schedule Week Topic Reading Assignment
1 Introduction, safety rules orientation of laboratory Instructor’s notes Homework 2 Oxyacetylene cutting demonstration Chap.6, pgs. 156-176 Project #1 3 The World of Structural Steel Instructor’s notes Project #1 4 The preparation of structural steel design drawings Instructor’s notes Project #1 5 The preparation of structural steel sections and
details and steel shop drawings Instructor’s notes Project #2
6 Steel Production and fabrication plant Instructor’s notes Project #2 7 Steel Fabrication equipment cutting machines,
drilling shears, grinders and punches Instructor’s notes Project #2
8 Methods of connections, Bolts-common & high strength Rivets Inspection of fasteners
Instructor’s notes Chapt.6 Pgs. 170 - 171
Project #3
9 Shielded Metal Arc Welding Operation of Equipment & welding procedures
Chapt. 1 pgs.9-25
Project #3
10 Identification and Classification of Welded Joints Chapt. 2, pgs 63-78
Project #3
11 Steel Erection Erection plans and equipment Types of hoisting equipment
Instructor’s notes Project #4
12 Inspecting Welds Types – destructive and non-destructive
Chapt. 28 pgs. 637-658
Project #4
13 Manufacture of Steel Chapt. 1, pgs. 48-62 Chapt. 25,pgs.585-600
Report Project
14 Welding Symbols Types of Welds
Chapt. 2, pgs. 63-78
Report Project
15 Completion of term laboratory projects Completion of laboratory test projects Final Examination
Final Exam
Technology Computer software such as: word processing, spreadsheet, computer aided drafting and design, structural and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all other who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: September 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 3602 Heavy Construction Practices Course Description Heavy construction projects, such as highways, bridges, railroads, earthwork and pipelines, each have their own unique design and construction challenges. Students will gain a global understanding of the methods, equipment, and procedures used in heavy construction projects. Emphasis is placed on working with multidisciplinary engineers, contractors, and agencies; heavy and automated equipment, environmental impact analysis, sustainability and design life, safety, permitting, and regulations pertaining to heavy construction in the New York City area. Prerequisite(s) CMCE2306, CMCE2456 and CMCE2415 2 class hours, 2 credits Required Textbook Andres, C.K., Smith, R.C., Principles and Practices of Heavy Construction, 5th Ed., Prentice Hall, 2000, 493pp. ISBN 978-0132353267 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. perform standard analysis and design in heavy construction, a recognized technical specialty within construction engineering technology; (Criterion 9.f)
b. knowledge of the impact of engineering technology solutions in a societal and global context (Criterion 3.j); and
c. applying principles of construction law and ethics; (Criterion 9.d) Student Evaluations Homework 40% Reports 10%
Presentations 10% Midterm Exam 20% Final Exam 20%
Final Grade = 100% Technology Computer software such as: word processing, spreadsheet, computer aided drafting and design will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: September 27, 2011) 2
Class Schedule
Week Topic Reading Assignment 1 Site Investigation and Layout Chapters 1-2 2 Permitting and Environmental Impact Analysis Handout 3 Excavations and Equipment Chapter 3 and EIA Assignment 14 Foundations and Foundation Layout Chapters 4-5
5 Formwork Chapter 6 and Formwork Assignment 2
6 Concrete Work Chapter 7 7 Midterm Exam 8 Structural Timber Frame Chapter 8 9 Reinforced Concrete Frame Chapter 9 10 Structural Steel Frame Chapter 10 Framing Assignment 311 Industrial Floor and Roof Systems Chapters 11-12
12 Masonry Construction Chapter 13 Floor Systems Assignment 4
13 Curtain Walls, Insulation, and Finishing Chapters 14-16 14 Final Presentations 15 Final Exam
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: November 7, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4400 Bridge Building Technology Course Description: Topics include various bridge geometries such as fixed and moveable, stringer/girder, steel truss, concrete slab, box beam, suspension, and arch bridges. Emphasis will be placed on the unique design considerations and construction challenges for each bridge type. Case studies of NYC bridges will be used. Prerequisite(s): CMCE 3501
3 class hours, 3 credits
Reference(s): Instructor will provide digital copies of the AASHTO bridge design manual. Students are expected to have their AISC Steel Design manual from CMCE 2315.
Student Learning Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. understanding of and a commitment to address professional and ethical responsibilities including a respect for diversity (Criterion 3.i);
b. select and apply a knowledge of engineering and technology to engineering technology problems that require the application of principles and applied procedures or methodologies; (Criterion 3.b)
Student Evaluation Projects 40%
Midterm Exam 30% Final Exam 30%
Final Grade = 100% Computer Usage Computer software such as: word processing, spreadsheet, computer aided drafting and design software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all other who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: November 7, 2011) 2
Course Schedule Week Topic Assignment
1 Introduction to Bridges 2 Slab Bridges 3 Stringer and Girder Bridges Project 1 4 Box and Tee Beam Bridges 5 Truss Bridges - Deck Project 2 6 Truss Bridges - Thru 7 Arch Bridges 8 Midterm 9 Suspension Project 3 10 Suspension 11 Cable Stayed 12 Movable Bridges - Lift Project 4 13 Movable Bridges - Bascule 14 Movable Bridges - Swing 15 Final
1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4401 – Special Topics in Construction Engineering Technology Course Description: Students will be exposed to a particular technology and/or trend with the goal that they will be better able to adapt in the workplace. Emphasis is placed instilling the need for lifelong learning and understanding professional, ethical and social responsibilities that come with all advancements in technology, engineering, and science. Prerequisites: CMCE3602
3 class hours, 3 credits
Reference: Varies depending on the technology or trend to be explored.
Course Learning Outcomes During the semester, the goal is to accomplish the Course Learning Outcomes listed below. Each student will be assessed (graded) on these goals. The purpose of the Course Learning Outcomes is to strengthen and develop the skills, or Program Outcomes, that each student will need to graduate. Each course focuses on specific Program Outcomes.
1. apply new and improved technology effectively 2. effectively communicate technical information through reports and/or presentations
Program Outcomes Upon graduation, each student is expected to demonstrate the following:
1. an ability to apply current knowledge and adapt to emerging applications of mathematics, science, engineering, and technology (Criterion 3.b),
2. a recognition of the need for, and an ability to engage in lifelong learning (Criterion 3.h), and 3. an ability to understand professional, ethical and social responsibilities (Criterion 3.i)
Student Evaluations Midterm & Final: 2 exams x 30 points = 60 points 60% Term Paper: 1 paper x 40 points = 40 points 40% Final Grade = 100% Technology: Computer software such as: word processing, spreadsheet, computer aided drafting and design, structural and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion. Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: January 25, 2010)
Coordinator: J. R Lemuel Morrison L.S., Lecturer (Last Updated: March 15, 2010)
1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4410 Land Development and Design Course Description Introduction to the process of development on both suburban and urban parcels including federal, state and municipal land use regulations and federal and state regulations regarding environmental issues. The course will cover sustainability issues regarding environmental impact, social cohesion and broader professional requirements. Students will work through a development project from site placement to land survey and prepare a preliminary plan. Prerequisite(s) CMCE 2322, CMCE 2410 1 class hour, 4 laboratory hours, 3 credits Required Textbook Dewberry, Sydney & Matusik, John, Land Development Handbook, 2nd Edition McGraw-Hill, 2002, 1124 pages, ISBN-13: 978-0071375252 Reference(s) Arendt, Randall, Conservation Design for Subdivisions, Island Press, 1996, 203 pages, ISBN-13: 978-1559634892 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. producing and utilizing design, construction, and operations documents (Criterion 9.a); b. identify, analyze, and solve broadly-defined engineering technology problems relating to land
development; (Criterion 3.f); and c. apply written, oral, and graphical communication in both technical and nontechnical
environments; and an ability to identify and use appropriate technical literature; (Criterion 3.g) Student Evaluations: Projects 55% Midterm Exam 15% Final exam 30% Final Grade = 100%
Coordinator: J. R Lemuel Morrison L.S., Lecturer (Last Updated: March 15, 2010)
2
Course Schedule
Technology Computer software such as: word processing, spreadsheet, computer aided drafting and design and geographic information will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all other who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Week Topic Reading Assignment
1
Course introduction and Overview History of suburban growth & urban revival Overview of a development design and sustainability Chapters 1-2
2
Planning: an introduction Government regulations. SEQRA & CEQRA. Development analysis Chapter 3
3
Site Analysis and Selection Using GIS to involve and enable stakeholders Environment considerations and sustainability in design Chapter 4
4 Engineering: an introduction Maps drawings and specifications Chapter 5
5 Surveying: Topography and Boundary Chapter 6 6 Soils, terrain, Chapter 7 (Review)
7 Midterm Exam Professional development Chapter 7 (Review)
8 Property layout, streets, alignment and site design 9 Water supply and wastewater collection. Chapter 8 10 Storm water management & erosion control Chapter 9 11 Utilities: power, gas, communication Chapter 11 12 The plan submittal, review and application process Chapter 12
13 Cost estimates. Sustainability and application of LEED requirements Chapters 15, 17, 18
14 Project workshop Chapters 16, 19, 20 Project Due 15 Final exam
Course Coordinator: Paul Pellicani, AIA | NCARB | LEED AP, Sub. Lecturer (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY Of the City University of New York The Department of Construction Management & Civil Engineering Technology CMCE 4415 Real Estate Development Fundamentals Course Description Students are introduced to the process required to develop and manage five types of real estate products: land, residential, office, industrial, and retail uses. Focusing on small-scale projects, student will learn practical methods for developing each major type of real estate, including feasibility analysis, design and construction, financing, marketing, and management. Photos, site plans, diagrams, and case studies provide examples of actual projects and how the process works.
Prerequisite(s) CMCE 1224 or CMCE 2455 3 class hours, 3 credits Required Textbook Peiser, Richard B., Professional Real Estate Development: The ULI Guide to the Business, 2nd Edition, Urban Land Institute, 2003, 414pp. ISBN 978-0874208948 Reference(s) Instructor’s Notes Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. perform economic analyses and cost estimates related to design, construction, and maintenance of systems in real estate development; (Criterion 9.b);
b. knowledge of the impact of engineering technology solutions in a societal and global context; and (Criterion 3.j); and
c. select and apply the knowledge, techniques, skills, and modern tools of the discipline to broadly-defined engineering technology activities in real estate development (Criterion 3.a)
Student Evaluations Homework Assignments and Quizzes 20% Project 25% Presentation 5% Midterm Exam 25% Final Exam 25% Final Grade 100%
Course Coordinator: Paul Pellicani, AIA | NCARB | LEED AP, Sub. Lecturer (Last Updated: Sept. 27, 2011) 2
Class Schedule
Week Topic
Reading
Assignment 1 Introduction Chapter 1 Homework 1 2 Managing the Development process Chapter 2 3 Organizing for Development - Consultants Chapter 2 4 Organizing for Development – Design/Build team Chapter 3 Homework 2
5 Land Development – Feasibility, Design and Site planning
Chapter 3
6 Land Development – Financing and Marketing Chapter 3 7 Land Development – Construction Chapter 4 Homework 3 8 Multifamily Residential Development --- --- 9 Midterm Exam Chapter 5 10 Office Development Chapter 6 Homework 4 11 Industrial Development Chapter 7 12 Retail Development Chapter 8 13 Trends and Issues --- 14 Project Presentation --- Project Due 15 Final Exam --- ---
Technology Computer software such as: word processing, spreadsheet, geographic information, and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Coordinator: J. R Lemuel Morrison L.S., Lecturer (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4422 Introduction to Geographic Information Systems (GIS) Course Description Students will gain a practical knowledge of GIS software and the fundamentals of how GIS marries databases to a spatial framework. The class work will include lectures on topologies, measurement methods, coordinate systems, map projections with practical instruction in the computer lab. Students will draw upon current projects and issues to create maps and provide analysis. Prerequisite(s) CMCE 2322 and CMCE 2410 1 class hour, 4 laboratory hours, 3 credits Required Textbook Longley, Paul, Goodchild, Michael Maguire, David and Rhind, David, Geographic Information Systems and Science, 2nd edition, Wiley, 2005, 536 pages, ISBN-13: 978-0470870013 Reference(s) ESRI, Getting to Know ArcGIS Desktop: The Basics of ArcView, ArcEditor, and ArcInfo Updated for ArcGIS 9, 2nd edition, Esri Press, 2004, 572 pages, ISBN-13: 978-1589480834 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. conduct standard measurements and to apply experimental results to improve processes relating to GIS; (Criterion 9.c);
b. select and apply the knowledge, techniques, skills, and modern tools of the discipline relating to GIS (Criterion 3.a); and
c. ability to apply graphical communication in both technical and nontechnical environments; and an ability to identify and use appropriate technical literature (Criterion 3.g)
Student Evaluation Projects 55% Midterm Exam 15% Final exam 30% Final Grade = 100%
Coordinator: J. R Lemuel Morrison L.S., Lecturer (Last Updated: Sept. 27, 2011) 2
Class Schedule
Technology Computer software such as: GIS, word processing, spreadsheet, computer aided drafting and design and geographic information will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Week Topic Reading Assignment
1 Course introduction and Overview Conceptual framework of GIS and Fundamentals Chapters 1-2
2 GIS Structure and Function Coordinate Systems and Datums Chapter 3
3 GIS Data Introduction to Databases and Metadata Chapter 4
4
Database Design and Maintenance Functions of Map Communicating Geospatially Chapter 5
5 Sources of Data: proprietary, imagery, government Chapter 6
6 Basic GIS Operations – Computer Lab Midterm Review Chapter 7 (Review)
7 Midterm Exam Chapter 7 (Review) Project 1 Due
8 Visualization – Computer Lab Searches and Queries
9 Data Analysis Chapter 8 10 Advanced Visualization and Presentation Chapter 9 11 Data Collection and Importing data Chapter 11 12 Create Topology and Join Database to Spatial Data Structure Chapter 12 13 Spatial Analysis Chapters 15, 17, 18
14 Project #2 Workshop Final Review Chapters 16, 19, 20
Project 2 Due
15 Final exam
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4423 – Transportation Engineering Technology Course Description Students will study the planning, design, construction, operation, and maintenance of highways from the perspective of the transportation engineer. This course builds upon the knowledge and skills gained in the Route Surveying course.
Prerequisite(s) CMCE 2322
3 class hours, 3 credits
Required Textbook Wright, P.H., Dixon, K., Highway Engineering, 7th Edition, Wiley, 2003, 730pp. ISBN 978-0471264613
Reference(s) Instructor’s notes and copies of select design codes
Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. plan and prepare design and construction documents, (Criterion 9.a), b. selecting appropriate construction materials and practices (Criterion 9.c), and c. performing standard analysis and design in the field of highway engineering appropriate to the goals of
the program (Criterion 9.f). Student Evaluations Projects 40%
Midterm Exam 30% Final Exam 30%
Final Grade = 100% Technology Computer software such as: word processing, spreadsheet, computer aided drafting and design and geographic information software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: Sept. 27, 2011) 2
Course Schedule
Week Topic Reading Assignment 1 Introduction and Highway Administration Chapters 1-2 2 Transportation Planning Chapter 3 3 Highway Evaluation Chapter 4
4 Driver, Pedestrian, and Vehicle Characteristics Chapter 5 Project 1: Highway Evaluation
5 Traffic Characteristics Chapter 6
6 Geometric Design of Highways Chapter 7 (Review) Project 2: Highway Design
7 Geometric Design of Highways Chapter 7 (Review) 8 Midterm 9 Roadside Design Chapter 8
10 Intersections, Interchanges Terminals Chapter 9
Project 3: Intersection and Interchange Design
11 Drainage Systems Chapter 11 12 Traffic Engineering Chapter 12 13 Highway Materials Chapters 15, 17, 18
14 Pavement Design Chapters 16, 19, 20 Project 4: Pavement Design
15 Final
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4456 – Foundation Analysis and Design Course Description This is a continuation of Soil Mechanics. Students will apply soil mechanics principles to the design and analysis of both shallow and deep foundations. Installation and testing methods will also be covered in this course. Case histories will be used to illustrate typical design and construction methods.
Prerequisite(s) CMCE 2456, CMCE 2315 and CMCE 2415
3 class hours, 3 credits
Required Textbook Das, Braja M. Principles of Foundation Engineering, 6th Ed., Cengage Learning, 2010, 816pp. ISBN 978-0495668107 Reference(s) Naval Facilities Engineering Command, Soil Mechanics Design Manual 7.01, 1986. SN 0525LP3007056 Naval Facilities Engineering Command, Foundations and Earth Structures Design Manual 7.02, 1986. SN 0525LP3007071 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. select appropriate construction materials and practices (Criterion 9.c) b. an ability to apply basic technical concepts to the solution of construction problems involving geotechnics,
structures and construction safety; and (Criterion 9.e) c. an ability to perform standard analysis and design recognized technical specialty within construction
engineering technology relating to foundation analysis and design. (Criterion 9.f)
Student Evaluations Homework 20%
Projects 30% Quizzes 10% Midterm Exam 20% Final Exam 20%
Final Grade = 100%
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
Class Schedule
Week Topic Reading Assignments
Assignments Homework
No. Project
No.Week 1 Review of Soil Mechanics Fundamentals-
Identification, Description and Classification of Soils (U.S.C.S.)
Chapter 1 1.1-1.2
Week 2 Review of Soil Mechanics – Strength & Consolidation Theories
Chapter 1 1.11-1.21
Week 3 Introduction to Foundation Engineering - Types of Foundations, Design Criteria, Subsurface Exploration
Chapter 2 2.1-2.8, 2.9-2.22
#1 – 2-2,2-6,2-14,2-18,
Week 4 Site Exploration Supplemental Notes Week 5 Shallow Foundations – Bearing Capacity and
Settlement Chapter 3 3.1-3.11 Chapter 4 4.1-4.7, 4.15 -4.17
#2 – 3-4, 3-6, 3-7,
3-9, 3-12
Week 6 Shallow Foundations – Footings on Clay and Footings on Rock Eccentrically Loaded Footing and Combined Footings
Chapter 4 4.9,4.12,4.18
Project #1 Bearing Capacity
Week 7 Shallow Foundations – Mat Foundations Chapter 6 6.1-6.7
#3 – 4-2,4-3,4-5,4-13,4-
16, 4-20
Week 8 Midterm Exam Week 9 Site Stabilization – Preloading, surcharge Chapter 12
12.8-12.11 Project #2
Foundation Design
Week 10 Introduction to Deep Foundations- Pile types, Design Criteria
Chapter 11 11.1-11.4
Week 11 Installation Methods Deep Foundations Chapter 11 Supplemental Notes
Week 12 Pile Capacity and Settlement – Single piles and pile groups
Chapter 11 11.5-11.20
#4 11-10,11-14,11-20
Project #3 Pile Design
Poject Week 13 Lateral and Uplift Capacity Week 14 Load Testing Supplemental Notes Week 15 Final Exam
Technology Computer software such as: word processing, spreadsheet and pile design software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4458 – Earth Retaining Structures Course Description: Introduction to classical lateral earth pressure theories. Students will apply soil mechanics principles to the design and analysis of earth retaining structures. Design and analysis of cantilever retaining (concrete and steel) walls as well as braced excavations will be studied. Segmental retaining wall (SRW) systems will also be covered in this course.
Prerequisite(s): CMCE 2315, CMCE 2415 and CMCE 2456
3 class hours, 3 credits
Required Textbook: Das, Braja M. Principles of Foundation Engineering, 6th Ed., Cengage Learning, 2010, 816pp. ISBN 978-0495668107 References: Department of the Army U.S. Army Corps of Engineers, Manual No 1110-2-2504 Engineering and Design of Sheet Pile Walls, 1994. Publication No. EM 1110-2-2504 Naval Facilities Engineering Command, Soil Mechanics Design Manual 7.01, 1986. SN 0525LP3007056 Naval Facilities Engineering Command, Foundations and Earth Structures Design Manual 7.02, 1986. SN 0525LP3007071 Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. select appropriate construction materials and practices (Criterion 9.c) b. an ability to apply basic technical concepts to the solution of construction problems involving
geotechnics, structures and construction safety; and (Criterion 9.e) c. an ability to perform standard analysis and design recognized technical specialty within construction
engineering technology relating to foundation analysis and design. (Criterion 9.f)
Student Evaluations Homework 20%
Projects 40% Midterm Exam 15% Final Exam 25%
Final Grade = 100%
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
Class Schedule
Week Topic Reading Assignment
Assignments Home Work
No. Project
No.Week 1 Introduction to Retaining Structures
Rigid, Flexible, Gravity, Cantilever, Braced, Segmental Wall Systems
Chapter 7 Sections 7.1,7.2 Supplemental Notes
Week 2 Lateral Earth Pressure Theories Chapter 7 Sections 7.3-7.13
#1 – 7-2, 6,-10,15
Week 3 Retaining Wall Design – Cantilever (Concrete)
Chapter 8 Sections 8.1-8.9 Supplemental notes
Project #1 Concrete Retaining
Wall Design Week 4 Retaining Wall Design – Gravity Supplemental notes #2 – 8-4 Week 5 Retaining Wall Design – Mechanically
Stabilized Chapter 8 Sections 8.10-8.15
#3 – 8-16
Week 6 Sheet Pile Walls – Cantilever Chapter 9 Sections 9.1-9.7
#4 – 9-2,9-6 Project #2 Sheet Pile
Wall Design Week 7 Midterm Exam Week 8 Sheet Pile Walls – Cantilever
(Solider pile and lagging) Supplemental notes
Week 9 Sheet Pile Walls – Anchored Chapter 9 Sections 9.8-9.18
#5 – 8-15
Week 10 Tie Back Walls Supplemental notes #6 - Class Project #3 Tie Back Wall
Design Week 11 Tie Back Walls Supplemental notes Week 12 Braced Excavations Chapter 10
Sections 10.1-10.7 #7 – 8-24
Week 13 SRW Design & Analysis Supplemental notes Project #4 SRW Design
Week 14 SRW Design & Analysis Supplemental notes Week 15 Final Exam
Computer Usage Computer software such as: word processing, spreadsheet, and retaining wall design software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students an all other who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4460 – Design of Temporary Structures Course Description Students will be introduced to the design of systems that support construction activities and operations including the determination of design loads during construction and the application of these loads for the design of excavation support systems, earth retaining systems, temporary supports and underpinning, concrete formwork and shoring systems.
Prerequisite(s) CMCE 2456, CMCE 2315 and CMCE 2415
3 class hours, 3 credits
Required Textbook Ratay, Robert T., Handbook of Temporary Structures in Construction, 2nd Edition, McGraw-Hill, 1996. ISBN 0-07-0512612 References Naval Facilities Engineering Command, Soil Mechanics Design Manual 7.01, 1986. SN 0525LP3007056 Naval Facilities Engineering Command, Foundations and Earth Structures Design Manual 7.02, 1986. SN 0525LP3007071 American Association of State Highway and Transportation Officials, AASHTO Construction Handbook for Bridge Temporary Works, 1st Ed., 1995, 134pp. Item Code CHBTW-1-M Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. an ability to select appropriate construction materials and practices (Criterion 9.c) b. an ability to apply basic technical concepts to the solution of construction problems involving geotechnics,
structures, and construction safety (Criterion 9.e) c. an ability to perform standard analysis and design (Criterion 9.f)
Student Evaluations Homework 20%
Projects 25% Presentations 15%
Midterm Exam 15% Final Exam 25%
Final Grade = 100%
Course Coordinator: Melanie Villatoro, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
Class Schedule
Week Topic Reading Assignment
Assignments Home Work
No. Project
No.Week 1 Introduction to Professional Practices
and Relationships in Construction Chapter 1
Week 2 Review of Basic Construction Site Safety and Introduction to Standard Equipment
Chapter 3 and 5
Week 3 Review of Local Building Codes and Introduction to Construction Loads
Chapter 4 and 6 Supplemental Notes
#1 – Handout
Week 4 Roadway Decking, Construction Ramps and Platforms
Chapter 13 and 14 #2 - Handout Project #1 Crane Loading
Week 5 Formwork Chapter 17 Week 6 Types of Earth Retaining Structures
– Temporary and Permanent Chapter 8 #3 - Handout
Week 7 Midterm Exam Week 8 Design of Earth Retaining Structures Supplemental notes Project #2
Case Study Student
responsible for Design of a Temporary Structure.
Week 9 Staged Construction Supplemental notes #4 - Handout Week 10 Construction Dewatering Chapter 10 Week 11 Final Paper Due and Student
Presentations
Week 12 Underpinning Chapter 12 #5 – Handout Week 13 Cofferdams Chapter 7 Week 14 Instrumentation and Monitoring Supplemental notes Week 15 Final Exam
Technology Computer software such as: word processing, spreadsheet and pile and shoring design software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Mewburn H Humphrey, Ph.D., P.E., PMP, Adj. Professor. (Last Updated: Sept 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4471 - Quality Assurance Course Description: Topics include: the established quality elements of management responsibility; documented quality management system; design control; document control; purchasing; product identification and traceability; process control; inspection and testing; inspection, measuring, and test equipment; inspection and test status; nonconformance; corrective action; quality records; quality audits and training, documented in ISO 9000, 9001: 2000 FTA QA/QC Guidelines. Prerequisite(s): CMCE 2420 or Departmental Approval 3 class hours, 3 credits
Required Textbook(s): Chung, H.W., Understanding Quality Assurance in Construction; A Practical Guide to ISO 98000 for Contractors, 2nd Ed., Routledge Publishers; 2002, 251pp. ISBN: 0-419-24950-8
Reference(s): Instructor’s notes and copies of select design standards Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. demonstrate a commitment to quality, timeliness, and continuous improvement (Criterion 9.k); b. demonstrate a commitment to address professional and ethical responsibilities including a respect for
diversity; (Criterion 3.i); and c. perform standard analysis and design in risk management appropriate to the goals of the program (Criterion
9.f) Student Evaluations:
Homework 15% Projects 20%
Labs 10% Quizzes 15% Midterm Exam 20% Final Exam 20%
Final Grade = 100% Technology Computer software such as: word processing, spreadsheet, computer aided drafting and design, structural and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Mewburn H Humphrey, Ph.D., P.E., PMP, Adj. Professor. (Last Updated: Sept 27, 2011) 2
Class Schedule
Week Topic Reading Assignment
1
Introduction to QA/QC for Construction Projects. QA/QC problems in the industry. Overview of the documented requirements that establish an efficient and effective QMS in the industry.
Chapter 1. of text. Humphrey’s QAP and QMP. Quality Assurance White Paper
Based on what you heard so far, is QA a benefit or a waste of time? Does it slow down the process or saves time and money? Who could benefit from QA/QC? Search online for additional information
2
Management Responsibility FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Paragraph on need for contractors’ management concern in having QA Plans.
3
Quality System and System Requirements Management responsibility
Chapters 2, 8 and 9 of Text and Humphrey’s QAP and QMP and relevant sections of FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Prepare a Tree Diagram showing a QMS for a Project with a sub-tier structure.
4
Design Control FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
5
Document Control FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Do a one-pager on the importance of document control during the design process.
6
Purchasing/Procurement Humphrey’s QAP and QMP. FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Do paragraph on the pros and cons of sole source procurement and the impacts to quality.
7 Mid-Semester Examination
8
Product Identification and Traceability
FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Research online projects that benefited from management of this element. How did it assist the legally and in determining where nonconformances could have occurred. Do not plagiarize. Use references in your report
9
Process Control FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
10
Inspection and Testing; Inspection, Measuring, and Test Equipment; Inspection and Test Status
FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Search these three elements online and prepare a one-pager of their Quality benefits on projects.
11
Non Conformance and Corrective Action
Chapter 6 of text. FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Give the pros and cons for a contractor having a Quality program that stresses “Do it right the first time” with strict measures for CA if NC detected and his/her opportunities for market share. Your recommendations.
12
Quality Records FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
13
Quality Audits Chapter 6 of text. FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Prepare Audit Check List for a QA/QC Element for a project
14
Quality Training Chapters 4 & 5 of text. FTA QA/QC Guidelines, ISO 9001:2000, ISO 9001:2008 and Quality Assurance White Paper.
Slide Presentation of QA Training for Quality Staff on ARC THE Tunnel Project.
15 Final Examination
Course Coordinator: Paul Pellicani, AIA | NCARB | LEED AP, Sub. Lecturer (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY Of the City University of New York The Department of Construction Management & Civil Engineering Technology CMCE 4473 – Building Information Modeling (BIM) Course Description: BIM is implemented as part of a comprehensive systems approach to the design, construction, management, operation, maintenance, and use of buildings. Topics will include discussion of how BIM supports more streamlined, integrated, and efficient business processes throughout the life cycle of buildings, from their initial conception through their eventual retirement or reuse.
Prerequisites: CMCE 2319, CMCE 2410 and (CMCE 2420 or Departmental Approval) 1 class hour, 4 laboratory hours, 3 credits Required Textbook: Hardin, Brad, BIM and Construction Management: Proven Tools, Methods, and Workflows. 1st edition, 2009, 360pp. ISBN 978-0470402351 Reference(s): Instructor’s Notes Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities: 1. producing and utilizing design, construction, and operations documents (Criterion 9.a); 2. apply graphical communication in both technical and nontechnical environments; and an ability to
identify and use appropriate technical literature; (Criterion 3.g); 3. performing standard analysis and design within the technical specialty of BIM appropriate to the goals of
the program (Criterion 9.f) Student Evaluations Homework Assignments and Quizzes 20% Project 30% Midterm Exam 25% Final Exam 25% Final Grade 100%
Course Coordinator: Paul Pellicani, AIA | NCARB | LEED AP, Sub. Lecturer (Last Updated: Sept. 27, 2011) 2
Class Schedule
Week Topic
Reading
Assignment 1 Introduction Chapter 1 Homework 1 2 BIM and Construction Management Chapter 2 3 BIM and Pre-Construction - Contracts Chapter 2 4 BIM and Pre-Construction - Estimating Chapter 3 Homework 2 5 BIM and Construction - Scheduling Chapter 3 6 BIM and Construction – Trade Coordination Chapter 4 7 BIM and Updates - Prebid --- 8 Midterm Exam Chapter 4 Homework 3 9 BIM and Updates – Budget management Chapter 5 10 BIM and Construction Administration – RFI & Punchlist Chapter 5 11 BIM and Construction Administration – Site Coord. Chapter 6 Homework 4 12 BIM and Sustainability - Preconstruction Chapter 7 13 BIM and Facility Management Chapter 8 14 BIM and Future capabilities --- Project due 15 Final Exam ---
Technology Computer software such as: building information modeling, word processing, spreadsheet, geographic information, and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Prof. Marissa Moran, J.D. (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4700 Construction Law Course Description The writing intensive course introduces students to the areas of the law that they are most likely to encounter in construction. Following an introduction to the legal system and form of legal analysis, areas to be addressed will include contracts, procurement, scope definition, delays and acceleration, site conditions, warranties, termination, tort claims, international issues, dispute resolution, and ethics. Pre or Co-requisite(s) CMCE 3601 3 class hours, 3 credits Required Textbook Construction Law for Managers, Architects, and Engineers, Nancy J. White, J.D. Prentice Hall, 2008. ISBN-10: 1-4180-4847-X, ISBN-13: 978-14180-4847-1 References: Principles and Practices of Construction Law, Nancy J. White, J.D. Prentice Hall, 2002 and http://www.agc.org/cs/contracts Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. understanding of and a commitment to address professional and ethical responsibilities including a respect for diversity; (Criteria 3.i)
b. knowledge of the impact of engineering technology solutions in a societal and global context; and (Criteria 3.j)
c. applying principles of construction law and ethics (Criterion 9.d) Student Evaluations Class Participation 10%
Projects 30% Midterm Exam 30%
Final Exam 30% Final Grade = 100%
Course Coordinator: Prof. Marissa Moran, J.D. (Last Updated: Sept. 27, 2011) 2
Class Schedule
Week Class
Schedule Topic Reading
Assignment Homework
1 Lecture 1 Introduction to Government and Dispute Resolution Process in US Chapter 1 Assignment 1
2 Lecture 2
Mistakes In Bids, Defective Construction, and Differing and Unforeseen Site Conditions Chapter 2 Assignment 2
3 Lecture 3 Employment and Labor Law Chapter 3 Assignment 3
4 Lecture 4
Forms of Doing Business, Proper Delivery Methods, and Contractual Relationships Common in Construction Projects Chapter 4 Assignment 4
5 Lecture 5 Bonds, Liens and Waivers Chapter 5 Assignment 5
6 Lecture 6 Legal Issues Relating to Plans and Specifications
Chapter 6/ Take Home Midterm Distributed
7 Lecture 7 Contract Formation, Breach and Damages Chapter 7
8 Lecture 8 Changes, Additions and Delays Chapter 8 Assignment 6 9 Lecture 9 Scope of the Contract Chapter 9 Assignment 7
10 Lecture 10 Environmental, Real Property, and Intellectual Property Law Chapter 10 Assignment 8
11 Lecture 11 Insurance and Torts and Warranties Chapters 11 & 12 Assignment 9
12 Lecture 12 Sales of Materials and Supplies Chapter 13 Assignment 10
13 Lecture 13 Killer Clauses
Chapter 14/ Take Home Final Distributed
14 Lecture 14 International Issues surrounding Contracts and Parties Handouts
15 Final Exam Due
Technology Computer software such as: word processing and spreadsheet will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: Sept. 27, 2011) 1
NEW YORK CITY COLLEGE OF TECHNOLOGY Of the City University of New York The Department of Construction Management & Civil Engineering Technology CMCE 4701 Construction Field Management Course Description To provide the students with a working knowledge of the construction process, responsibilities of different parties, importance of project documentation, and effective work coordination. Details of jobsite layout planning, personnel management and labor relations, dispute resolution and negotiations, long term and short term procurements are discussed. The fundamentals of work progress measurement, time and cost control, and change order management are covered in detail. Prerequisite(s) CMCE 2420 or Departmental Approval 3 class hours, 3 credits Required Textbook Construction Jobsite Management, by W. R. Mincks and H. Johnston, 2nd Edition, Delmar Reading, 2004. ISBN: 1-4018-0912-X Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
a. perform economic analyses and cost estimates related to design, construction, and maintenance of systems in the construction technical specialties (Criterion 9.b); and
b. apply basic technical concepts to the solution of construction problems involving hydraulics and hydrology, geotechnics, structures, construction scheduling and management, and construction safety (Criterion 9.e);
Student Evaluations Class Participation 5% Homework 15% Quizzes 10% Presentation 10% Midterm Exam 25% Final Exam 35% Final Grade = 100%
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: Sept. 27, 2011) 2
Class Schedule
Technology Computer software such as: word processing, spreadsheet and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Week Topic Reading Assignment 1 Introduction to Project Management Techniques Chapter 1 2 Project Delivery Systems Chapter 2 Homework #1 3 Construction Documents Chapter 3
4 Submittals, Record Keeping, and Work Documentation Chapters 4 and 5 Homework #2
5 Jobsite Layout Planning and Constraints Chapter 6
6 Meetings, Dispute Resolution, and Labor Relations Chapters 7 and 8
7 Personnel Control and Management Chapter 9 Homework #3 8 Midterm Exam --- 9 Subcontracting and Purchasing Chapter 10 10 Project Quality Control and Management Chapter 11 Homework #4 11 Project Time and Cost Management Chapters 12 and 14 12 Progress Measurement and Payments Chapter 15 Homework #5 13 Project Closeout Process Chapter 16 14 Presentation of Student Case Studies --- Presentation Due 15 Final Exam ---
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: Sept. 27, 2011)
1
NEW YORK CITY COLLEGE OF TECHNOLOGY Of the City University of New York The Department of Construction Management & Civil Engineering Technology CMCE 4702 Construction and Site Safety Management Course Description To provide the students with a working knowledge of the construction hazards, safety precautions, and effective integration of safety regulations into the design and construction phases. Different types of construction related hazards including crane, equipment and machinery, universal, access, construction, operation, and maintenance hazards together with methods to prevent them from happening are discussed. Prerequisite(s) CMCE 2420 or Departmental Approval 3 class hours, 3 credits Required Textbook Construction Safety Engineering Principles, by D. V. McCollum, McGraw-Hill, 2007. ISBN: 0-07-148244-X Reference(s) Instructor’s Notes and handouts of selected OSHA Regulations Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities:
1. selecting appropriate construction materials and practices (Criterion 9.c); 2. applying principles of construction law and ethics (Criterion 9.d); and 3. applying basic technical concepts to the solution of construction problems involving construction
scheduling, management, and safety (Criterion 9.e),
Student Evaluations Class Participation 5% Homework 15% Quizzes 10% Presentation 10% Midterm Exam 25% Final Exam 35% Final Grade = 100%
Course Coordinator: Sigurd Stegmaier, RA, Associate Professor (Last Updated: Sept. 27, 2011)
2
Class Schedule
Technology Computer software such as: word processing, spreadsheet and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Week Topic Reading Assignment 1 Introduction to Construction Safety and Hazards Chapters 1 and 2 2 Categories of Hazards Chapter 3 Homework #1
3 Controlling Hazards Through Design Improvement Chapters 4 and 5
4 Evaluating Safe Performance Chapter 6 Homework #2 5 Crane Hazards Chapter 7 6 Equipment and Machinery Hazards Chapter 8 7 Universal and Access Hazards Chapters 9 and 10 Homework #3 8 Midterm Exam --- 9 Construction Hazards Chapter 11 10 Operation and Maintenance Hazards Chapter 12 Homework #4 11 Including Safety into Design Planning Chapter 13 12 Including Safety into Construction Planning Chapter 14 Homework #5 13 Overview of OSHA Safety Regulations OSHA Handout 14 Presentation of Student Case Studies --- Presentation Due 15 Final Exam ---
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
1
NEW YORK CITY COLLEGE OF TECHNOLOGY of the City University of New York The Department of Construction Management and Civil Engineering Technology CMCE 4800 – Senior Capstone Course Description The senior capstone project is an integrating experience that draws together diverse elements of the curriculum and develops student competence by focusing on both technical and non-technical skills to solve problems. Students will work in teams to solve a comprehensive problem beginning with conceptual design all the way through to final design, preparation of construction documents and cost estimation. Non-technical skills such as presentation skills, teamwork, accountability and ethics will be emphasized. Prerequisite(s) CMCE 4700
3 class hours, 3 credits
Reference(s) Instructor will provide digital copies of journal articles and selected design standards relating to the specific capstone project.
Student Outcomes ABET, Inc. is the nationally recognized accrediting body for engineering technology programs. The CMCE department has adopted the most current ABET student outcomes criterion. Student performance in this course will be assessed based on the following learned capabilities: 1. function effectively as a member or leader on a technical team (Criterion 3.e); 2. engage in self-directed continuing professional development; (Criterion 3.h); 3. understanding of and a commitment to address professional and ethical responsibilities including a respect
for diversity (Criterion 3.i); and 4. role-play in a capstone or integrating experience that develops student competencies in applying both
technical and non-technical skills in solving problems (Criterion 5) Student Evaluations Reports 40%
Midterm Presentation 30% Final Presentation 30%
Final Grade = 100% Technology Computer software such as: word processing, spreadsheet, slide presentation, computer aided drafting and design, geographic information, building information modeling, and project scheduling software will be utilized in this course. Students are expected to use Blackboard® in this course. Attendance Policy Students are expected to adhere to the attendance policy as outlined in the Student Handbook. Academic Integrity Policy Students and all others who work with information, ideas, texts, images, music, inventions, and other intellectual property owe their audience and sources accuracy and honesty in using, crediting, and citing sources. As a community of intellectual and professional workers, the College recognizes its responsibility for providing instruction in information literacy and academic integrity, offering models of good practice, and responding vigilantly and appropriately to infractions of academic integrity. Accordingly, academic dishonestly is prohibited in The City University of New York and at New York City College of Technology and is punishable by penalties, including failing grades, suspension, or expulsion.
Course Coordinator: Gerarda M. Shields, PE, Assistant Professor (Last Updated: Sept. 27, 2011)
2
Course Schedule
Week Topic Assignment 1 Defining the Project 2 Scope of Work 3 Scheduling Progress Report 1 4 Conceptual Design 5 Conceptual Design Progress Report 2 6 Presentation Skills Seminar 7 Midterm Presentation 8 Final Design 9 Final Design Progress Report 3 10 Final Design 11 Cost Estimates 12 Construction Drawings and Specifications 13 Construction Drawings and Specifications Progress Report 4 14 Final Presentation 15 Final Presentation and Wrap-up
APPENDIX C – PROGRAM SCHEDULING (SED Form)
FOR THE
BACHELOR OF TECHNOLOGY (BTECH)
IN CONSTRUCTION ENGINEERING TECHNOLOGY
Tabl
e 1a
: U
nder
grad
uate
Pro
gram
Sch
edul
e –
Con
stru
ctio
n M
anag
emen
t Tec
hnol
ogy
Sign
atur
e (C
urre
nt C
urric
ulum
Req
uire
men
ts)
(
Nov
. 21,
201
1)
In
dica
te a
cade
mic
cal
enda
r typ
e: x
Sem
este
r __
Qua
rter
__Tr
imes
ter
__
Oth
er (d
escr
ibe)
Te
rm: F
all 1
st
Che
ck c
ours
e cl
assi
ficat
ion(
s)Te
rm: F
all 5
th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
ajN
ewPr
ereq
uisi
te(s
) C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
New
Prer
equi
site
(s)
CM
CE
110
4 S
tatic
s &
Stre
ngth
s of
Mat
eria
ls I
2
X
N
one
CM
CE
245
6 S
oil M
echa
nics
(See
Tab
le 4
B)
3
X
C
MC
E12
04,M
AT1
375
PH
YS 1
433
CM
CE
111
0 C
onst
ruct
ion
Dra
win
gs I
2
X
N
one
CM
CE
232
2 R
oute
Sur
veyi
ng (S
ee T
able
4B
) 3
X
CM
CE
122
2 C
MC
E 1
114
Mat
eria
ls &
Met
hods
of C
onst
ruct
ion
I 3
X
Non
e C
MC
E 3
501
Ste
el F
abric
atio
n/D
etai
ling
2
X
X
CM
CE
122
4,C
MC
E
2315
, CM
CE
241
0 C
MC
E 1
155
Com
pute
r App
licat
ions
in E
ngin
eerin
g Te
chno
logy
2
X
CU
NY
Pro
ficie
ncy
in
Rea
ding
and
writ
ing
LAP
3
X
CU
NY
Pro
ficie
ncy
MA
T 13
75 P
re-C
alcu
lus
4 X
M
AT
1175
P
HYS
143
3 P
hysi
cs 1
.3 o
r PH
YS 1
441
Phy
sics
1.3
4/
5 X
P
HYS
143
3 E
NG
110
1 E
nglis
h C
ompo
sitio
n I
3 X
C
UN
Y P
rofic
ienc
y in
R
eadi
ng &
Writ
ing
Term
cre
dit t
otal
: 16
Term
cre
dit t
otal
:15
/16
Te
rm: S
prin
g 2nd
C
heck
cou
rse
clas
sific
atio
n(s)
Te
rm: S
prin
g 6th
C
heck
cou
rse
clas
sific
atio
n(s)
C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
N
ewPr
ereq
uisi
te(s
) C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
New
Prer
equi
site
(s)
CM
CE
120
4 S
tatic
s &
Stre
ngth
s of
Mat
eria
ls II
3
X
CM
CE
110
4 A
RC
H 2
450
Sus
tain
abili
ty T
hrou
gh A
rchi
tect
ure
3
X
C
MC
E 2
320
CM
CE
121
0 C
onst
ruct
ion
Dra
win
gs II
–
Intro
duct
ion
to C
AD
1
X
CM
CE
111
0 &
115
5 A
RC
H 3
662
Mun
icip
al A
genc
ies
and
the
Form
al
App
rova
l Pro
cedu
re
3
X
D
ept.
App
rova
l
CM
CE
122
2 S
urve
ying
I 3
X
CM
CE
1110
,115
5,
1210
& M
AT
1275
C
MC
E 3
602
Hea
vy C
onst
ruct
ion
Pra
ctic
es
2
X
X
CM
CE
112
4,C
MC
E
2420
or D
ept.
App
r. C
MC
E 1
220
Con
stru
ctio
n M
anag
emen
t I
2
X
C
MC
E11
10, 1
114
CU
NY
Pro
ficie
ncy
MA
T 15
75 C
alcu
lus
II (A
dditi
onal
Req
uire
d)
4 X
M
AT
1375
CM
CE
122
4 M
ater
ials
& M
etho
ds o
f Con
stru
ctio
n II
2
X
C
MC
E 1
110,
111
4 C
UN
Y P
rofic
ienc
y C
OM
M C
omm
unic
atio
ns E
lect
ive
3 X
C
UN
Y P
rofic
ienc
y
MA
T 14
75 C
alcu
lus
I 4
X
MA
T 12
75
CO
MM
Com
mun
icat
ions
Ele
ctiv
e 3
X
CU
NY
Pro
ficie
ncy
in
Rea
ding
& W
ritin
g
Term
cre
dit t
otal
: 18
Term
cre
dit t
otal
:15
Term
: Fal
l 3rd
C
heck
cou
rse
clas
sific
atio
n(s)
Te
rm: F
all 7
th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
ajN
ewPr
ereq
uisi
te(s
) C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
New
Prer
equi
site
(s)
CM
CE
230
6 M
ater
ials
Tes
ting
Labo
rato
ry
2
X
C
MC
E 2
315
CU
NY
Pro
ficie
ncy
CM
CE
470
0 C
onst
ruct
ion
Law
3
X
X
C
MC
E 2
420,
A
RC
H 3
662
CM
CE
231
5 E
lem
ents
of S
truct
ural
Des
ign
– S
teel
3
X
CM
CE
120
4 C
MC
E 4
701
Con
stru
ctio
n Fi
eld
Man
agem
ent
3
X
X
CM
CE
242
0 C
MC
E 2
319
Bui
ldin
g S
ervi
ce S
yste
ms
2
X
C
MC
E 1
224
CM
CE
470
2 C
onst
ruct
ion
and
Site
Saf
ety
Man
agem
ent
3
X
X
CM
CE
242
0
CM
CE
232
0 C
onst
ruct
ion
Man
agem
ent I
I 2
X
CM
CE
122
0 C
MC
E T
echn
ical
Ele
ctiv
e –
See
Tab
le 4
C
3
X
X
See
Cou
rse
Des
crip
tion
CM
CE
Ele
ctiv
e
AC
C11
62 E
lem
ents
of A
ccou
ntin
g or
M
KT
1100
Ess
entia
ls o
f Mar
ketin
g 3
X
CU
NY
Pro
ficie
ncy
BS
/SS
Beh
avio
ral S
cien
ce/S
ocia
l Sci
ence
Ele
ctiv
e 3
X
CU
NY
Pro
ficie
ncy
PH
YS 1
433
Phy
sics
1.3
or P
HYS
144
1 P
hysi
cs 1
.3
4/5
Term
cre
dit t
otal
: 16
/17
Te
rm c
redi
t tot
al:
15
Te
rm: S
prin
g 4th
C
heck
cou
rse
clas
sific
atio
n(s)
Te
rm: S
prin
g 8th
C
heck
cou
rse
clas
sific
atio
n(s)
C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
New
Prer
equi
site
(s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
ajN
ewPr
ereq
uisi
te(s
) C
MC
E 2
410
Con
stru
ctio
n D
raw
ings
III
2
X
CM
CE
1155
,121
0,
122,
1224
C
MC
E 4
800
Sen
ior C
apst
one
Pro
ject
3
X
X
C
MC
E 4
400
CM
CE
241
2 E
stim
atin
g 2
X
CM
CE
115
5,12
20
CM
CE
122
4 C
MC
E T
echn
ical
Ele
ctiv
e –
See
Tab
le 4
C
3
X
X
See
Cou
rse
Des
crip
tion
CM
CE
241
5 E
lem
ents
of S
truct
ural
Des
ign
– C
oncr
ete
2
X
C
MC
E 1
204
CM
CE
Tec
hnic
al E
lect
ive
– S
ee T
able
4C
3
X
X
S
ee C
ours
e D
escr
iptio
n C
MC
E 2
420
Con
stru
ctio
n M
anag
emen
t III
2
X
C
MC
E 2
320
BS
/SS
Beh
avio
ral S
cien
ce/S
ocia
l Sci
ence
Ele
ctiv
e 3
X
CU
NY
Pro
ficie
ncy
BS
/SS
EC
ON
110
1 M
acro
econ
omic
s 3
X
CU
NY
Pro
ficie
ncy
LIT
Lite
ratu
re
3 X
C
UN
Y P
rofic
ienc
y LA
P L
itera
ture
/Aes
thet
ics/
Phi
loso
phy
3 X
C
UN
Y P
rofic
ienc
y
Te
rm c
redi
t tot
al:
14
Te
rm c
redi
t tot
al:
15
Prog
ram
Tot
als:
C
redi
ts: 1
24
Libe
ral A
rts
& S
cien
ces:
43
Maj
or: 6
6 E
lect
ive
& O
ther
: 15
Tabl
e 1b
: U
nder
grad
uate
Pro
gram
Sch
edul
e –
Civ
il En
gine
erin
g Te
chno
logy
Sig
natu
re
(Cur
rent
Cur
ricul
um R
equi
rem
ents
)
(N
ov. 2
1, 2
011)
Indi
cate
aca
dem
ic c
alen
dar t
ype:
x S
emes
ter
__Q
uarte
r __
Trim
este
r
__O
ther
(des
crib
e)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
ajN
ewPr
ereq
uisi
te(s
) C
ours
e N
umbe
r & T
itle
Cr
LAS
Maj
New
Pr
ereq
uisi
te(s
) C
MC
E 1
104
Sta
tics
& S
treng
ths
of M
ater
ials
I 2
X
Non
e C
MC
E 1
114
Mat
eria
ls &
Met
hods
of
Con
stru
ctio
n I
3
X
N
one
CM
CE
111
0 C
onst
ruct
ion
Dra
win
gs I
2
X
N
one
CM
CE
122
0 C
onst
ruct
ion
Man
agem
ent I
2
X
CM
CE
1110
, 111
4 C
UN
Y P
rofic
ienc
y C
MC
E 1
155
Com
pute
r App
licat
ions
in E
ngin
eerin
g Te
chno
logy
2
X
CU
NY
Pro
ficie
ncy
in
Rea
ding
and
writ
ing
CM
CE
231
9 B
uild
ing
Ser
vice
Sys
tem
s 2
x
X
CM
CE
245
5
EN
G 1
101
Eng
lish
Com
posi
tion
I 3
X
CU
NY
Pro
ficie
ncy
in
Rea
ding
and
writ
ing
CM
CE
241
2 E
stim
atin
g 2
X
CM
CE
115
5,12
20
CM
CE
122
4 M
AT
1475
Cal
culu
s I
4 X
M
AT
1375
C
MC
E 3
501
Ste
el F
abric
atio
n/D
etai
ling
2
x X
C
MC
E 1
124,
CM
CE
23
15, C
MC
E 2
410
LAP
Lite
ratu
re/A
esth
etic
s/P
hilo
soph
y 3
X
CU
NY
Pro
ficie
ncy
in
Rea
ding
& W
ritin
g O
ther
Ele
ctiv
e –
See
Tab
le 7
B
(AC
C 1
162
or M
KT
1100
) 3
x
Term
cre
dit t
otal
: 16
Term
cre
dit t
otal
:14
Term
: Spr
ing
2nd
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Term
: Spr
ing
6th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
aj
New
Prer
equi
site
(s)
Cou
rse
Num
ber &
Titl
eC
r LA
S
Maj
N
ew
Prer
equi
site
(s)
CM
CE
120
4 S
tatic
s &
Stre
ngth
s of
Mat
eria
ls II
3
X
CM
CE
110
4 C
MC
E 2
320
Con
stru
ctio
n M
anag
emen
t II
2
X
C
MC
E 1
220
CM
CE
121
0 C
onst
ruct
ion
Dra
win
gs II
–
Intro
duct
ion
to C
AD
1
X
CM
CE
111
0 &
115
5 A
RC
H 3
450
Sus
tain
abili
ty T
hrou
gh
Arc
hite
ctur
e 3
X
CM
CE
232
0
CM
CE
122
2 S
urve
ying
I 3
X
CM
CE
1110
,115
5,
1210
& M
AT
1275
A
RC
H 3
662
Mun
icip
al A
genc
ies
and
th
e Fo
rmal
App
rova
l Pro
cedu
re
3
X
D
ept.
App
rova
l
MA
T 15
75 C
alcu
lus
II 4
X
MaA
T 14
75
CM
CE
360
2 H
eavy
Con
stru
ctio
n P
ract
ices
2
X
X
C
MC
E 1
224,
CM
CE
24
56 o
r Dep
t.App
rova
l P
HYS
143
3 P
hysi
cs 1
.2 o
r PH
YS 1
441
Phy
sics
1.2
4/
5
X
C
MC
E 1
110,
111
4 C
UN
Y P
rofic
ienc
y C
MC
E T
echn
ical
Ele
ctiv
e –
See
Tab
le 7
C
3
X
X
See
Cou
rse
Des
crip
tion
BS
/SS
: EC
ON
111
0 M
acro
econ
omic
s
3 X
C
UN
Y P
rofic
ienc
y Te
rm c
redi
t tot
al:
15/1
6
Term
cre
dit t
otal
:16
Term
: Fal
l 3rd
C
heck
cou
rse
clas
sific
atio
n(s)
Te
rm: F
all 7
th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
aj
New
Prer
equi
site
(s)
Cou
rse
Num
ber &
Titl
e C
r LA
S M
aj
New
Pr
ereq
uisi
te(s
) C
MC
E 2
306
Mat
eria
ls T
estin
g La
bora
tory
2
X
CM
CE
231
5 C
UN
Y P
rofic
ienc
y C
MC
E 4
700
Con
stru
ctio
n La
w
3
X
X
CM
CE
242
0,
AR
CH
366
2 C
MC
E 2
315
Ele
men
ts o
f Stru
ctur
al D
esig
n –
Ste
el
3
X
C
MC
E 1
204
CM
CE
470
1 C
onst
ruct
ion
Fiel
d
Man
agem
ent
3
X
X
CM
CE
242
0
CM
CE
232
2 R
oute
Sur
veyi
ng
3
X
C
MC
E 1
222
CM
CE
470
2 C
onst
ruct
ion
and
Site
Saf
ety
Man
agem
ent
3
X
X
CM
CE
242
0
CM
CE
235
1 Fl
uid
Mec
hani
cs
4
X
C
MC
E 1
220
LIT
(B C
ore)
3
X
C
MC
E 2
351L
Flu
id M
echa
nics
Lab
0
X
CU
NY
Pro
ficie
ncy
CO
MM
– C
omm
unic
atio
ns (B
.Cor
e)
3
P
HYS
143
4 P
hysi
cs 2
.2 o
r PH
YS 1
442
Phy
sics
2.3
4/
5
Te
rm c
redi
t tot
al:
16/1
7
Term
cre
dit t
otal
:15
Term
: Spr
ing
4th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Term
: Spr
ing
8th
Che
ck c
ours
e cl
assi
ficat
ion(
s)
Cou
rse
Num
ber &
Titl
e C
r LA
SM
aj
New
Prer
equi
site
(s)
Cou
rse
Num
ber &
Titl
e C
r LA
S M
aj
New
Pr
ereq
uisi
te(s
) C
MC
E 2
410
Con
stru
ctio
n D
raw
ings
III
2
X
CM
CE
1155
,121
0,
122,
1224
C
MC
E 4
800
Sen
ior C
apst
one
Pro
ject
3
X
X
C
MC
E 4
400
CM
CE
241
5 E
lem
ents
of S
truct
ural
Des
ign
– C
oncr
ete
2
X
C
MC
E 1
155,
1220
C
MC
E 1
224
CM
CE
Tec
hnic
al E
lect
ive
– S
ee T
able
7C
3
X
X
S
ee C
ours
e D
escr
iptio
n C
MC
E 2
454
App
lied
Hyd
raul
ics
– W
ater
Sup
ply
2
X
C
MC
E 1
204
CM
CE
Tec
hnic
al E
lect
ive
– S
ee T
able
7C
3
X
X
S
ee C
ours
e D
escr
iptio
n C
MC
E 2
455
Mat
eria
ls &
Met
hods
of C
onst
ruct
ion
2
X
C
MC
E 2
320
BS
/SS
Beh
avio
ral S
cien
ce/S
ocia
l Sci
ence
3
X
CU
NY
Pro
ficie
ncy
CM
CE
245
6Soi
l Mec
hani
cs
3
X
BS
/SS
3
X
CU
NY
Pro
ficie
ncy
LAP
(B
Cor
e)
3 X
C
UN
Y P
rofic
ienc
y C
OM
M
3 X
C
UN
Y P
rofic
ienc
y
Te
rm c
redi
t tot
al:
17
Te
rm c
redi
t tot
al:
15
Prog
ram
Tot
als:
C
redi
ts: 1
24
Libe
ral A
rts
& S
cien
ces:
43
Maj
or: 5
8 E
lect
ive
s &
Oth
er: 2
3
APPENDIX D - FACULTY TEACHING ASSIGNMENTS (SED Form)
FOR THE
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
Tabl
e 2:
Ful
l-Tim
e Fa
culty
N
ovem
ber 2
5, 2
010
Facu
lty te
achi
ng a
t the
gra
duat
e le
vel m
ust h
ave
an e
arne
d do
ctor
ate/
term
inal
deg
ree
or d
emon
stra
te s
peci
al c
ompe
tenc
e in
the
field
. Pro
vide
info
rmat
ion
on fa
culty
mem
bers
who
are
fu
ll-tim
e at
the
inst
itutio
n an
d w
ho w
ill be
teac
hing
eac
h co
urse
in th
e m
ajor
fiel
d or
gra
duat
e pr
ogra
m. T
he a
pplic
atio
n ad
dend
um fo
r pro
fess
iona
l lic
ensu
re, t
each
er c
ertif
icat
ion,
or
educ
atio
nal l
eade
rshi
p ce
rtific
atio
n pr
ogra
ms
may
pro
vide
add
ition
al d
irect
ions
for t
hose
type
s of
pro
posa
ls.
Facu
lty M
embe
r Nam
e an
d Ti
tle
(incl
ude
and
iden
tify
Prog
ram
D
irect
or)
Prog
ram
Cou
rses
to b
e Ta
ught
Pe
rcen
t Tim
e to
Pro
gram
H
ighe
st a
nd O
ther
App
licab
le
Earn
ed D
egre
es &
Dis
cipl
ines
(in
clud
e C
olle
ge/U
nive
rsity
)
Add
ition
al Q
ualif
icat
ions
: lis
t re
late
d ce
rtific
atio
ns/ l
icen
ses;
oc
cupa
tiona
l exp
erie
nce;
sc
hola
rly c
ontri
butio
ns, e
tc.
Ant
hony
Cio
ffi,
P.E.
Pr
ofes
sor/
Dep
artm
ent C
hair
man
CM
CE12
04 S
tatic
s &
Str
engt
h of
Mat
eria
ls II
10
MS
Civi
l Eng
inee
ring
M
anha
ttan
Col
lege
B.
S. C
ivil
Engi
neer
ing
Man
hatt
an C
olle
ge
AA
S Co
nstr
uctio
n Te
chno
logy
N
ew Y
ork
City
Com
mun
ity C
olle
ge
Lice
nsed
Pro
fess
iona
l Eng
inee
rN
ew Y
ork
Cert
ified
Exa
min
er –
Am
eric
an C
oncr
ete
Inst
itute
30
yea
rs o
f ind
ustr
y ex
perie
nce
as a
n en
gine
er
CMCE
445
6 Fo
unda
tion
Anal
ysis
& D
esig
n
CMCE
445
8 Ea
rth
Reta
inin
g St
ruct
ures
Rouz
ebh
Naz
ari,
PhD
A
ssis
tant
Pro
fess
or
CMCE
222
2 Su
rvey
ing
I
25
Ph.D
Civ
il En
gine
erin
g Th
e Ci
ty U
nive
rsit
y of
New
Yor
k
City
Col
lege
/Gra
duat
e Ce
nter
M
.S. C
ivil
Engi
neer
ing
The
Cit
y U
nive
rsit
y of
New
Yor
k Ci
ty C
olle
ge
B.S.
Civ
il En
gine
erin
g Is
fahn
Uni
vers
ity
of T
echn
olog
y
NO
AA-P
ost D
octo
ral R
esea
rch
Asso
ciat
e D
irect
or o
f Env
ironm
enta
l Rem
ote
Sens
ing
And
Imag
e Pr
oces
sing
Lab
– C
ity U
nive
rsity
of
New
Yor
k D
irect
or o
f Flu
id M
echa
nics
Lab
Ci
ty U
nive
rsity
of N
ew Y
ork
Cons
ulta
nt JA
COBI
Med
ical
Cen
ter
3 ye
ars
of in
dust
ry e
xper
ienc
e as
an
engi
neer
CMCE
232
2 Ro
ute
Surv
eyin
g
CMCE
442
2 G
eogr
aphi
c In
form
atio
n Sy
stem
s (G
IS)
CMCE
442
3 Tr
ansp
orta
tion
Engi
neer
ing
Tech
.
Ham
id N
orou
zi, P
hD, P
.E.
Ass
ista
nt P
rofe
ssor
Pr
ogra
m D
irec
tor
CMCE
230
6 M
ater
ials
Tes
ting
50
Ph.D
Civ
il En
gine
erin
g Th
e Ci
ty U
nive
rsit
y of
New
Yor
k
City
Col
lege
of N
ew Y
ork
M.P
hil.
Civi
l Eng
inee
ring
T
he C
ity
Uni
vers
ity
of N
ew Y
ork
City
Col
lege
M
.S. C
ivil
Engi
neer
ing
Tarb
iat
Mod
arre
s U
nive
rsit
y
B.S.
Civ
il En
gine
erin
g Ir
an U
nive
rsit
y of
Sci
ence
and
Te
chno
logy
(IU
ST)
Lice
nsed
Pro
fess
iona
l Eng
inee
r Te
xas
2008
-Pre
sent
Nat
iona
l Sci
ence
Fo
unda
tion
(NSF
) – R
esea
rch
Expe
rien
ces
for U
nder
grad
uate
s (R
EU) P
rogr
am
6 y
ears
of i
ndus
try
expe
rienc
e as
an
engi
neer
CMCE
231
5 St
ruct
ural
Des
ign
– St
eel
CMCE
241
5 St
ruct
ural
Des
ign
- Con
cret
e
CMCE
480
0 Se
nior
Cap
ston
e Pr
ojec
t
Ger
arda
Shi
elds
, P.E
. A
ssis
tant
Pro
fess
or
CMCE
110
4 St
atic
s &
Str
engt
h of
Mat
eria
ls I
25
PhD
(In
Prog
ress
) Th
e Ci
ty U
nive
rsit
y of
New
Yor
k
City
Col
lege
of N
Y M
S Ci
vil E
ngin
eeri
ng
Man
hatt
an C
olle
ge
B.S.
Civ
il En
gine
erin
g M
anha
ttan
Col
lege
Lice
nsed
Pro
fess
iona
l Eng
inee
r Ca
lifor
nia
Pu
blic
atio
ns: G
eoCo
ngre
ss, “
Scou
r of
Brid
ge F
ound
atio
ns”-
sho
rt c
ours
e ER
WI,
“Sco
ur M
onito
ring”
7
yea
rs o
f ind
ustr
y ex
perie
nce
as a
n en
gine
er
CMCE
120
4 H
Sta
tics
& S
tren
gth
of M
ater
ials
II
CMCE
235
1 Fl
uid
Mec
hani
cs
CMCE
235
1L F
luid
Mec
hani
cs L
ab
CMCE
440
0 Br
idge
Bui
ldin
g Te
chno
logy
CMCE
480
0 Se
nior
Cap
ston
e Pr
ojec
t
Sigu
rd S
tegm
aier
, R.A
. A
ssoc
iate
Pro
fess
or
CMCE
111
0 Co
nstr
uctio
n D
raw
ings
25
MS
Urb
an P
lann
ing
The
City
Uni
vers
ity
of N
ew Y
ork
Ci
ty C
olle
ge o
f New
Yor
k B.
S. S
truc
tura
l Eng
inee
ring
Th
e Ci
ty U
nive
rsit
y of
New
Yor
k
City
Col
lege
of N
ew Y
ork
B. A
rchi
tect
ure
The
City
Uni
vers
ity
of N
ew Y
ork
Ci
ty C
olle
ge o
f New
Yor
k
Regi
ster
ed A
rchi
tect
N
ew Y
ork
47 y
ears
of i
ndus
try
expe
rienc
e as
an
Arch
itect
8
Des
ign
Pate
nts
CMCE
111
4 M
ater
ials
& M
etho
ds o
f Con
stru
ctio
n I
CMCE
122
0 Co
nstr
uctio
n M
anag
emen
t I
CMCE
122
4 M
ater
ials
& M
etho
ds o
f Con
stru
ctio
n II
CMCE
350
1 St
eel F
abric
atio
n D
etai
ling
Mel
anie
Vill
ator
o, P
.E.
Ass
ista
nt P
rofe
ssor
CM
CE 2
456
Soil
Mec
hani
cs
25
M.S
. Civ
il En
gine
erin
g Co
lum
bia
Uni
vers
ity
B.S.
Civ
il En
gine
erin
g Th
e Co
oper
Uni
on
Lice
nsed
Pro
fess
iona
l Eng
inee
r N
ew Y
ork
8 y
ears
of i
ndus
try
expe
rienc
e as
an
engi
neer
CMCE
241
5 St
ruct
ural
Des
ign
– Co
ncre
te
CMCE
445
6 Fo
unda
tion
Anal
ysis
& D
esig
n
CMCE
446
0 –
Des
ign
of T
empo
rary
Str
uctu
res
Tabl
e 3:
Par
t-Tim
e Fa
culty
N
ovem
ber 2
5, 2
011
Facu
lty te
achi
ng a
t the
gra
duat
e le
vel m
ust h
ave
an e
arne
d do
ctor
ate/
term
inal
deg
ree
or d
emon
stra
te s
peci
al c
ompe
tenc
e in
the
field
. Pro
vide
info
rmat
ion
on p
art-t
ime
facu
lty
mem
bers
who
will
be
teac
hing
eac
h co
urse
in th
e m
ajor
fiel
d or
gra
duat
e pr
ogra
m. T
he a
pplic
atio
n ad
dend
um fo
r pro
fess
iona
l lic
ensu
re, t
each
er c
ertif
icat
ion,
or e
duca
tiona
l le
ader
ship
cer
tific
atio
n pr
ogra
ms
may
pro
vide
add
ition
al d
irect
ions
for t
hose
type
s of
pro
posa
ls.
Facu
lty M
embe
r Nam
e an
d Ti
tle
Pr
ogra
m C
ours
es to
be
Taug
ht
Hig
hest
and
Oth
er A
pplic
able
Ea
rned
Deg
rees
& D
isci
plin
es
(incl
ude
Col
lege
/Uni
vers
ity)
Add
ition
al Q
ualif
icat
ions
: lis
t rel
ated
ce
rtific
atio
ns/li
cens
es; o
ccup
atio
nal
expe
rienc
e; s
chol
arly
con
tribu
tions
, etc
.
John
Am
isan
o, R
.A.
CMCE
1110
, CM
CE23
19M
S, A
rchi
tect
ure,
Col
umbi
a U
nive
rsit
y M
BA-R
eal E
stat
e, N
ew Y
ork
Uni
vers
ity
Regi
ster
ed A
rchi
tect
, NY,
NJ,C
T,PA
,FL
AIA,
NCA
RB
48 y
ears
of i
ndus
try
expe
rienc
e as
an
arch
itect
Nic
ole
And
erso
n CM
CE11
10,C
MCE
121
0,CM
CE 1
224
BA, A
rchi
tect
ure,
Uni
vers
ity o
f Mia
mi
LEED
AP
?? y
ears
of i
ndus
try
expe
rienc
e as
an
arch
itect
Vito
Anz
alon
e CM
CE12
20,C
MCE
122
4,CM
CE 2
320,
CM
CE 2
455
BS, B
uild
ing
Scie
nce,
Pra
tt In
stitu
te
49 y
ears
exp
erie
nce
as a
con
stru
ctio
n m
ange
r
CMCE
441
5, C
MCE
470
1
Al B
arce
nlla
P.E
. L.S
. CM
CE12
22B.
E.C.
E. B
ache
lor o
f Eng
inee
ring
, Civ
il Ci
ty C
olle
ge/C
UN
Y
Lice
nsed
Pro
fess
iona
l Eng
inee
r (N
Y)
Lice
nsed
Pro
fess
iona
l Lan
d Su
rvey
or
(New
Yor
k, C
onne
ctic
ut, P
enns
ylva
nia)
37
yea
rs o
f ind
ustr
y ex
perie
nce
as a
n en
gine
er
Shan
e Ba
ksh
CM
CE11
55,C
MCE
121
0,CM
CE 2
410
MS-
Real
Est
ate
Dev
elop
men
t, N
YU
B A
rch,
NY
Inst
itute
of T
echn
olog
y
LEED
- A
P 7
year
s in
dust
ry e
xper
ienc
e as
an
Arch
itect
CM
CE 4
473
Mic
hael
Bou
lis P
.E.
CMCE
1104
,CM
CE 1
204,
CMCE
122
2, C
MCE
232
2 M
aste
r of C
ivil
Engi
neer
ing,
N
YU- P
olyt
ech
Uni
v.
B.S.
Civ
il En
gine
erin
g., C
airo
Uni
vers
ity
Lice
nsed
Pro
fess
iona
l Eng
inee
r (N
Y)
11 y
ears
indu
stria
l exp
erie
nce
in e
ngin
eerin
g 11
yea
rs’ e
xper
ienc
e as
a H
S Te
ache
r Ce
rtifi
ed C
ivil
Engi
neer
ing
& A
rchi
tect
ure
Teac
her.
Le
ader
ship
Gra
d Sc
hool
of E
duca
tion
Thom
as C
amas
tro
P.E.
CMCE
2452
MS-
Envi
ronm
enta
l Eni
neee
ring
M
anha
ttan
Col
lege
B
Tech
, Civ
il En
grg.
, M
anha
ttan
Col
lege
Lice
nsed
Pro
fess
iona
l Eng
inee
r 25
yea
rs o
f ind
ustr
y ex
perie
nce
as a
n en
gine
er
Wan
dy C
hang
CM
CE11
10,C
MCE
1210
,CM
CE 1
224
MS,
Arc
hite
ctur
e, P
enns
ylva
nia
BA, M
athe
mat
ics,
Bry
n M
awr,
PA
LE
ED A
P 5
year
s’ e
xper
ienc
e as
a A
rchi
tect
H
S Te
ache
r – 5
yea
rs
NY/
NJ P
ublic
Sch
ool L
icen
se
5P\p
roje
ct le
ad th
e w
ay
Shar
da D
elRi
o CM
CE12
20,C
MCE
122
4,CM
CE23
20,
MS,
Man
agem
ent,
Pol
ytec
h U
nive
rsit
y B.
Tec
h-Fa
cilit
ies
Mgm
t. N
YCCT
A
AS
Civi
l Eng
inee
ring
Tec
hnol
ogy
10 y
ears
indu
stria
l exp
erie
nce
in C
onst
ruct
ion
Man
agem
ent
Ose
i Gye
bi, P
hD, P
.E.
CM
CE23
15,C
MCE
2415
Ph.D
. Co
lum
bia
Uni
vers
ity
MSC
E SU
NY
Buff
alo
BSCE
SU
NY
Buff
alo
Lice
nsed
Pro
fess
iona
l Eng
inee
r: N
Y, N
J, Co
nn.
25 y
ears
of i
ndus
try
expe
rienc
e as
an
engi
neer
Ant
hony
Hus
kiss
on
CMCE
111
0, C
MCE
121
0, C
MCE
1224
M
S, C
ivil
Engr
g., S
UN
Y Bu
ffal
o, N
Y BS
, Arc
hite
ctur
e, S
UN
Y Bu
ffal
o, N
Y
NCA
RB,
Regi
ster
ed ID
P 10
yea
rs in
dust
rial e
xper
ienc
e in
Arc
hite
ctur
e
Mew
burn
, Hum
phre
y Ph
D, P
.E.
CMCE
2420
,CM
CE 4
702
Ph.D
. Eng
inee
ring
, Ci
ty C
olle
ge o
f New
Yor
k/CU
NY
M. P
hil.
Engi
neer
ing,
Cit
y Co
llege
/CU
NY
M.E
. Civ
il En
gine
erin
g, C
ity
Colle
ge/C
UN
Y
Lice
nsed
Pro
fess
iona
l Eng
inee
r N
ew Y
ork,
New
Jers
ey, C
onne
ctic
ut
Mas
ters
Cer
tific
ate
Proj
ect M
anag
emen
t 30
+ y
ears
of i
ndus
try
expe
rienc
e as
an
engi
neer
An
d Co
nstr
uctio
n M
ange
r
Ale
x La
dias
C
MC
E 12
24, C
MC
E 24
12,
BS A
rchi
tect
ure
City
Col
lege
of N
ew Y
ork
/CU
NY
14 y
ears
indu
stria
l exp
erie
nce
in A
rchi
tect
ure
and
Cons
truc
tion
Man
agem
ent
Ynes
Leo
n
ARC
H36
62 M
unic
ipal
Age
ncie
s &
The
Form
al A
ppro
val
Proc
ess
MS
Urb
an P
lann
ing
City
Col
lege
of N
ew Y
ork/
CUN
Y
Eli L
edm
an
CM
CE
1220
, CM
CE
2320
, CM
CE
4472
M
S-Re
al E
stat
e, N
ew Y
ork
Uni
vers
ity
BS
, Civ
il En
gine
erin
g, C
olum
bia
Uni
v.
LEED
AP,
EIT
Cer
tifie
d
Mar
issa
Mor
an J.
D.
CM
CE
4700
Con
stru
ctio
n La
w
JD B
rook
lyn
Law
Sch
ool
Inst
ruct
or's
Man
ual f
or T
echn
olog
y an
d th
e La
w
Off
ice,
Pre
ntic
e H
all (
Sept
. 200
7)
Test
Ban
k to
Acc
ompa
ny T
echn
olog
y an
d th
e La
w
Off
ice,
Pre
ntic
e H
all (
Sept
. 200
7)
10 y
ear
expe
rienc
e as
an
Att
orne
y
Raqu
el N
ieve
s C
MC
E 11
55
B Te
ch i
n Co
mpu
ting
Info
. Ser
vice
s,
NYC
Col
lege
of T
echn
olog
y/CU
NY
14 y
ears
indu
stria
l exp
erie
nce
(IT)
Paul
Pel
lican
i R.A
.
CM
CE1
210,
CM
CE
2410
, CM
CE4
473
B A
rch
, New
Yor
k In
stitu
te o
f Tec
hnol
ogy
Regi
ster
ed A
rchi
tect
-NY,
NJ,P
A,M
O; L
EED
AP
Cert
.; N
CARB
Cer
tifie
d 21
yea
rs in
dust
ry e
xper
ienc
e as
an
arch
itect
.
Ed P
etro
u, P
.E.
CM
CE
1104
, CM
CE
2306
M
S Ci
vil E
ngin
eeri
ng
NYU
- Pol
ytec
hnic
Uni
vers
ity
B.S.
Civ
il En
gine
erin
g, C
ity
Colle
ge/C
UN
Y
Lice
nced
Pro
fess
iona
l Eng
inee
r – N
J, N
Y
31+
yea
rs o
f exp
erie
nce
as a
n en
gine
er
Rabe
l, G
eral
d E.
C
MC
E111
0 M
S Fa
cilit
ies
Mgm
t.-P
ratt
Inst
. BS
Arc
hite
ctur
e, C
ity
Colle
ge
NYS
Cer
tifie
d te
ache
r(D
raft
ing)
13
yea
rs’ e
xper
ienc
e as
H.S
> Te
ache
r 9
year
s in
dust
rial e
xper
ienc
e
Euni
ce R
egis
CM
CE
1220
, CM
CE
4702
MBA
(In
prog
ress
) Pr
att I
nsti
tute
BS
Arc
hite
ctur
e &
Con
stru
ctio
n M
gmt.
Pr
att I
nsti
tute
Site
Saf
ety
Lice
nse-
New
Yor
k St
ate
12
yea
rs’ e
xper
ienc
e in
con
stru
ctio
n m
anag
emen
t
AA
S-Co
nstr
uctio
n Te
chno
logy
N
ew Y
ork
City
Col
lege
of T
echn
olog
y/CU
NY
Ed P
etro
u, P
.E.
CM
CE
1104
, C
MC
E 23
06
MS
Civi
l Eng
inee
ring
, NYU
– P
olyt
echn
ic U
. B.
S. C
ivil
Engi
neer
ing
City
Col
lege
/CU
NY
Lice
nsed
Pro
fess
iona
l Eng
inee
r – N
J, N
Y
31 y
ears
of e
xper
ienc
e as
an
engi
neer
Rose
Sca
rlin
o C
MC
E 11
55
BBA
Mat
h/Co
mpu
ter S
cien
ce
PACE
Uni
vsit
y 10
yea
r tea
chin
g ex
perie
nce
8
year
pro
fess
iona
l exp
erie
nce
syst
ems
offic
er
JP M
orga
n
John
Sha
nley
CM
CE
2410
, CM
CE
4410
B
Tech
-Fac
ilitie
s M
gmt,
NYC
Col
lege
of
Tech
nolo
gy
Cert
ifica
te-L
and
Dev
elop
men
t Des
ktop
Fu
ndam
enta
ls; P
lan,
pro
file,
and
cro
ss s
ectio
ns,
Eart
hwor
k an
d gr
adin
g; c
ivil
desi
gn-A
pplie
d Si
te
Gra
ding
; Aut
odes
k ci
vil 3
d; N
ew Y
ork
Uni
v.
Auto
CAD
3-D
Mod
elin
g &
Ren
derin
g.
8 ye
ars
of in
dust
ry e
xper
ienc
e as
CAD
D
Tech
nici
an/M
anag
er.
Kibr
e Te
sfag
iori
s E
.I.T.
C
MC
E 11
04
Ph.D
-Civ
il En
grg.
(Exp
ecte
d c
ompl
etio
n 20
11) C
ity
Uni
vers
ity
of N
ew Y
ork
MS-
Wat
er R
esou
rces
Eng
. Ca
thol
ic &
Fre
e U
niv.
-Bel
gium
B
S Ci
vil E
ngin
eerin
g.
Mek
elle
Uni
v.-E
thio
pia.
Engi
neer
In T
rain
ing
(E.I.
T.)
Rese
arch
Ass
ista
nt
Robe
rt Z
agar
oli R
.A.
ARC
H 2
450
Sust
aina
bilit
y Th
roug
h Ar
chite
ctur
eM
PS D
esig
n M
anag
emen
t B
Arc
hite
ctur
e –
Prat
t Ins
titu
te
36
APPENDIX E - FACULTY TO BE HIRED (SED Form)
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
1
Tabl
e 4:
Fac
ulty
to b
e H
ired
If fa
culty
mus
t be
hire
d, s
peci
fy th
e nu
mbe
r and
title
of n
ew p
ositi
ons
to b
e es
tabl
ishe
d an
d m
inim
um q
ualif
icat
ions
.
Title
/Ran
k of
Pos
ition
N
o. o
f New
Po
sitio
ns
Min
imum
Qua
lific
atio
ns
(incl
udin
g de
gree
and
di
scip
line
area
) F/
T or
P/T
Pe
rcen
t Ti
me
to
Prog
ram
Ex
pect
ed C
ours
e A
ssig
nmen
ts
Expe
cted
H
iring
Dat
e
NO
NE
0 __
_ __
_ __
_ __
_ __
_
APPENDIX F - NEW RESOURCES TABLE (CUNY)
FOR
THE BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
Table 5: New Resources List new resources that will be engaged specifically as a result of the new program (e.g., a new faculty position or additional library resources). New resources for a given year should be carried over to the following year(s), with adjustments for inflation, if they represent a continuing cost.
New Expenditures Year 1 Year 2 Year 3
Personnel 0 0 1 FT CLT (56k)
Library $500 $500 $500
Equipment $0 $0 $0
Laboratories $0 $2,000 $0
Supplies & Expenses (Other Than Personal Service)
$0 $0 $0
Capital Expenditures $0 $0 $0
Other
Total all $500 $2,500 $56,500
36
APPENDIX G - PROJECTED REVENUE TABLE (CUNY)
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
1st Year 2nd Year 3rd Year 4th Year 5th YearAcademic Year[2] Academic Year† Academic Year† Academic Year† Academic Year†
Tuition Revenue[3]01. From Existing 02. From New Sources[5] $523,260 $167,443 $197,478 $234,092 $238,77403. Total $523,260 $570,353 $624,458 $658,724 $705,215State Appropriation[6]04. From Existing Sources§
05. From New Sources $0 $0 $0 $0 $006. Total $0 $0 $0 $0 $0Other Revenue[7]07. From Existing Sources§
08. From New Sources $0 $0 $0 $0 $009. Total $0 $0 $0 $0 $0Grand Total[8]10. From Existing Sources§
11. From New Sources $523,260 $167,443 $197,478 $234,092 $238,774TOTAL $523,260 $570,353 $624,458 $658,724 $705,215
[1] Specify the inflation rate used for projections.
[2] Specify the academic year.
[3] Please explain how tuition revenue was calculated.
[4] Existing sources means revenue generated by continuing students. Please rember to account for attrition and graduation rates
[5] New sources means revenue engendered by new students. The revenue from new sources from one year should be carried over to the next year as revenues from continuing sources with adjustments for inflation.
[6] Public institutions should include here State appropriations applied to this specific program.
[7] Specify what is included in "other" category.
[8] Enter total of Tuition, State and Other Revenue, from Existing or New Sources.
Projected Revenue Related to the Proposed Program
$0
$0 $402,910 $426,980 $424,632 $466,442
$0 $0 $0
$466,442
$0 $0 $0 $0 $0
Revenues[1]
$0 $402,910 $426,980
$0
$424,632
APPENDIX H ‐ SUPPORTING MATERIALS FOR PROJECTED REVENUE TABLE (CUNY)
FOR
THE BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
The Five-Year Revenue Projections for ProgramSENIOR COLLEGE WORKSHEET
Year One Year Two Year Three Year Four Year FiveTuition & Fees:Existing Students are students currently enrolled in another program at your college, or students who would have enrolled in another program at your college, had the new program not been established. Number of Majors (Enter # of EXISTING FULL TIME In State Students) 0 77 80 78 84Tuition Income (Specify Rate per credit) calculates 2% increase per year $5,130 $5,233 $5,337 $5,444 $5,553Total Tuition $0 $402,910 $426,980 $424,632 $466,442Student Fees (enter ANNUAL program fees other than standard CUNY fees) 0 0 0 0 0Total Fees 0 0 0 0 0Total Instate Tuition & Fees $0 $402,910 $426,980 $424,632 $466,442
Tuition & Fees:Number of Majors (Enter # of EXISTING FULL TIME Out of State Students) 0 0 0 0 0Tuition Income (Specify Rate per credit) calculates 2% increase per year $13,800 $14,076 $14,358 $14,645 $14,938Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0 0 0 0 0Total Out of State Tuition & Fees $0 $0 $0 $0 $0
TOTAL EXISTING FULL TIME TUITION REVENUE $0 $402,910 $426,980 $424,632 $466,442
Year One Year Two Year Three Year Four Year FiveTuition & Fees:Number of Majors (Enter # of EXISTING PART-TIME In State Students) 0 60 65 71 54Total Enrolled Credits (Enter Avg # credits per student per year-Fall+ Spring+Summer) i.e. 6 Fall, 6 Spring, 3 Summer=15Tuition Income (Specify Rate per credit) calculates 2% increase per year $240 $245 $250 $255 $260Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0Total Instate Tuition & Fees $0 $0 $0 $0 $0
Tuition & Fees:Number of Majors (Enter # of EXISTING PART-TIME Out of State Students) 0 0 0 0 0Total Enrolled Credits (Enter Avg # credits per student per year-Fall+ Spring+Summer) i.e. 6 Fall, 6 Spring, 3 Summer=15Tuition Income (Specify Rate per credit) calculates 2% increase per year $460 $469 $479 $488 $498Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0Total Out of State Tuition & Fees $0 $0 $0 $0 $0
TOTAL EXISTING PART TIME REVENUE $0 $0 $0 $0 $0
TOTAL EXISTING REVENUE (LINKS TO REVENUE SPREADSHEET ROW 5) $0 $402,910 $426,980 $424,632 $466,442
Year One Year Two Year Three Year Four Year FiveTuition & Fees:New Students are students who would NOT have enrolled in another program at your college, had the new program not been established. Number of Majors (Enter # of NEW FULL TIME In State Students) 102 32 37 43 43Tuition Income (Specify Rate per credit) calculates 2% increase per year $5,130 $5,233 $5,337 $5,444 $5,553Total Tuition $523,260 $167,443 $197,478 $234,092 $238,774Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0 0 0 0 0Total Instate Tuition & Fees $523,260 $167,443 $197,478 $234,092 $238,774
Tuition & Fees:Number of Majors (Enter # of NEW FULL TIME Out of State Students) 0 0 0 0 0Tuition Income (Specify Rate per credit) calculates 2% increase per year $13,800 $14,076 $14,358 $14,645 $14,938Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees) 0 0 0 0 0Total Fees 0 0 0 0 0Total Out of State Tuition & Fees $0 $0 $0 $0 $0
TOTAL NEW FULL TIME TUITION REVENUE $523,260 $167,443 $197,478 $234,092 $238,774
Year One Year Two Year Three Year Four Year FiveTuition & Fees:Number of Majors (Enter # of NEW PART-TIME In State Students) 80 26 30 35 35Total Enrolled Credits (Enter Avg # credits per student per year-Fall+ Spring+Summer) i.e. 6 Fall, 6 Spring, 3 Summer=15Tuition Income (Specify Rate per credit) calculates 2% increase per year $215 $219 $224 $228 $233Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0Total Instate Tuition & Fees $0 $0 $0 $0 $0
Tuition & Fees:Number of Majors (Enter # of NEW PART-TIME Out of State Students) 0 0 0 0 0Total Enrolled Credits (Enter Avg # credits per student per year-Fall+ Spring+Summer) i.e. 6 Fall, 6 Spring, 3 Summer=15Tuition Income (Specify Rate per credit) calculates 2% increase per year $460 $469 $479 $488 $498Total Tuition $0 $0 $0 $0 $0Student Fees (enter ANNUAL program fees other than standard CUNY fees)Total Fees 0 0 0 0 0Total Out of State Tuition & Fees $0 $0 $0 $0 $0
TOTAL NEW PART TIME REVENUE $0 $0 $0 $0 $0
TOTAL NEW REVENUE (LINKS TO REVENUE SPREADSHEET ROW 7) $523,260 $167,443 $197,478 $234,092 $238,774
Year One Year Two Year Three Year Four Year FiveState Revenue from EXISTING sources-identify sources 0 0 0 0 0
STATE BUDGET APPROPRIATIONS FROM EXISTING SOURCES -LINKS TO REVENUE SPREADSHEET ROW 9 $0 $0 $0 $0 $0
State Revenue from NEW sources-identify sources 0 0 0 0 0
STATE BUDGET APPROPRIATIONS FROM NEW SOURCES -LINKS TO REVENUE SPREADSHEET ROW 11 $0 $0 $0 $0 $0
FOR YEARS 2-5 INCLUDE CONTINUING RESOURCES FROM PREVIOUS YEARS
Year One Year Two Year Three Year Four Year FiveOther Revenue From Existing Sources (specify and explain)-LINKS TO REVENUE SPREADSHEET ROW 13) 0 0 0 0Other Revenue New (specify and explain) (LINKS TO REVENUE SPREADSHEET ROW 15) 0 0 0 0
APPENDIX I – FIVE YEAR FINANCIAL PROJECTION (CUNY TABLE)
THE BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
The Five-Year Financial Projections for Program
Year 1 Year 2 Year 3 Year 4 Year 5
Direct Operating Expenses (Include additional expenses incurred by other programs when satisfying needs of new program
Current Full Time Faculty Replacement Costs (list separately)Current Full Time Faculty Overload (include Summer)New Full Time Faculty Base Salary (list separetely)New Full Time Faculty Overload (include Summer)New Faculty Re-assigned Time (list seperately)Full Time Employee Fringe Benefits (33.0%) 0 0 0 0 0Total (Links to Full-Time Faculty on Program Exp Worksheet) 0 0 0 0 0
Part Time Faculty Actual SalariesPart Time Faculty Actual Fringe Benefits (10%) 0 0 0 0 0Total (Links to Part-Time Faculty Program Exp Worksheet) 0 0 0 0 0
Full Time Staff Base Salary (list separetely) CLT 42000Full Time Staff Fringe Benefits (33%) 0 0 13860 0 0Total (Links to Full-Time Staff on Program Exp Worksheet) 0 0 55,860$ 0 0
(DO NOT INCLUDE NEW LIBRARY STAFF IN THIS SECTION) Year 1 Year 2 Year 3 Year 4 Year 5Part Time Staff Base Salary (list separately)Graduate AssistantsStudent HourlyPart Time Employee Fringe Benefits (10.0%) 0 0 0 0 0Total (Links to Part-Time Staff on Program Exp Worksheet) 0 0 0 0 0
LIBRARYLibrary Resources $500 $500 $500Library Staff Full Time (List Separately)Full Time Staff Fringe Benefits (33%) 0 0 0 0 0Library Staff Part Time (List Separately)Part Time Employee Fringe Benefits (10.0%) 0 0 0 0 0TOTAL (Links to Library on Program Exp Worksheet) 500$ 500$ 500$ 0 0
EQUIPMENTComputer Hardware Office FurnitureOther (Specify)Total (Links to Equipment on Program Exp Worksheet) 0 0 0 0 0
LABORATORIESLaboratory Equipment Other (list separately)TOTAL (Links to Laboratories on Program Exp Worksheet 0 0 0 0 0
Year 1 Year 2 Year 3 Year 4 Year 5SUPPLIES AND EXPENSES (OTPS)Consultants and HonorariaOffice Supplies $1,000 $1,000 $1,000 $1,200 $1,200Instructional SuppliesFaculty DevelopmentTravel and ConferencesMembership FeesAdvertising and PromotionAccreditation 0 0 $3,000 $5,000Computer Software Computer License Fees Computer Repair and MaintenanceEquipment Repair and Maintenance New Total Supplies and OTPS Expenses (Links to Supplies on Program Exp Worksheet 1000 1000 4000 6200 1200
CAPITAL EXPENDITURESFacility Renovations Classroom Equipment Other (list separately) TOTAL (Links to Capital Expenditures on Program Exp Worksheet) 0 0 0 0 0
Other (list separately)
TOTAL (Links to Other on Program Exp Worksheet) 0 0 0 0 0
APPENDIX J ‐ FACULTY CURRICULA VITAE
THE BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
Anthony Cioffi, P.E. M. ASCE New York City College of Technology 300 Jay Street Brooklyn, N.Y. 11201 Curriculum Vitae – December 2011 1. Name: Anthony Cioffi, P.E. 2. Department: Construction/Civil Engineering Technology 3. Age: 54 4. Academic Rank: Professor / Department Chairman 5. Degrees:
(a) A.A.S. Degree Construction Technology, New York City Technical College - 1978 (b) Bachelor of Engineering Degree (Civil), Manhattan College - 1981 (c) Master of Engineering (Civil), Manhattan College – 1985
6. Number of years of service on this faculty: a) 4 years - College Laboratory Assistant: Part time b) 6 years - Adjunct Lecturer c) 6 years - Assistant Professor: Full time. d) 6 years - Associate Professor: Full time e) 9 years – Professor
7. Other teaching experience:
(a) Assistant Mentor, July 2003 & July 2005 - American Society of Civil Engineers “ExCEEd” Program (Excellence in Civil Engineering Education), Fayettville, Arkansas
(b) Building Works – Carpenters Union/NYC College of Technology
8. Full-time industrial experience: (a) EBASCO Services Assistant Engineer - 1981 - 1983
2 World Trade Center New York, N.Y. Responsible for design of reinforced concrete foundations and floor slabs, steel structures. Reviewed shop drawings and preparation of bid packages and construction sequence drawings.
(b) New York City Dept. Of Environmental Protection Assistant Engineer - 1983 40 Worth Street New York, N.Y. Field inspector - monitored contractors daily operations. Performed inspection on pile driving operations, 60" diameter sanitary sewer, concrete and earth fill operations.
(c) STV/Seelye Stevenson Value and Knecht Office Engineer: 1983 -1985 225 Park Avenue South Geotechnical Engineer: 1985 - 1991 New York, N.Y. Resident Engineer: 1990 - 1992 Civil engineer with experience in subsurface investigations for large scale projects including highways, bridges, rail facilities, commercial buildings, and institutional facilities. Overall experience encompasses project management, site planning, residential construction, foundation engineering, settlement analysis, slope stability, tieback and cantilever retaining wall design, field investigations, laboratory testing, and computer applications, including AutoCAD. Construction experience includes pile inspection, sanitary lines, drainage systems, embankments, rail facilities, residential structures.
9. Part-time industrial experience: (a) STV/Seelye Stevenson Value and Knecht Geotechnical Engineer: 1992 -1996
225 Park Avenue South Resident Engineer: 1992 - 1993 New York, N.Y. Part-time Geotechnical Engineer Subsurface investigations and foundation analysis for rail facilities, and institutional facilities. Part time Resident Engineer - Yonkers Combined Sewer Overflow Project, Yonkers, N.Y.
(b) Site Design Consultants Senior Engineer: 1990 - Present 221F Underhill Avenue Yorktown Heights, N.Y. Geotechnical Engineer/Structural Engineer Involved in subsurface analysis, subsurface borings, the design of residential and commercial additions, prefabricated and cast-in place retaining walls, bulkheads, foundation assessment & analysis and structural design, field inspection.
10. Consulting Work: 1989 - Present Geotechnical/Structural/Architectural/Pre-Fabricated Housing Involved in the design of residential and commercial additions, 1 story commercial buildings, modular and cast-in place retaining walls, bulkheads, foundation analysis and design, pile design, modular housing design and sales.
Date: December 11, 2011
11. Professional Recognition:
(a) P.E. State of New York (b) P.E. State of New Jersey (inactive) (c) P.E. State of Connecticut (inactive)
12. Principal publications of last five years: None 13. Scientific and professional societies of which a member:
(a) American Society of Civil Engineers (ASCE) (b) New York State Engineering Technology Association
14. Honors and Award: (a) Dean of Technology Award (N.Y.C. Technical College) (b) ASCE Future Cities Judge Award - 3 Year Award (c) N.Y.S. Department of Transportation, JUMP Program – Certificate of Appreciation (d) ASCE Lower Hudson Valley Branch – Member of the Year 2006
15. Specific programs to improve teaching and professional competence in which participated during the last five years: • Attended various courses, ASCE Seminars and conferences in the Metropolitan area. • American Society of Civil Engineers National Conference – November 2010 • New York State Engineering Technology Association - Conference Presentations • ASCE ExCEEd Program
16. Other duties performed for regular base salary during academic year, with average hours per week:
For all activities listed below, an average of 6 hours per week. (a) Faculty Advisor – NYCCT Steel Bridge Team (b) Member –College Personnel and Budget Committee (c) Member - College Building and Grounds Committee (d) Chair – Appointments Committee (f) Chair – Search Committee (g) Co-Chair – Construction Management & Civil Engineering Technology Advisory Committee (h) Member – City Poly Technic H.S. – Advisory Committee/Liaison (i) Member – H.S. for Construction Trades and Engineering and Architecture Advisory Committee (j) Urban Assembly for Green H.S. – Advisor
17. Other duties performed for extra compensation during academic year, with average hours per week: N.A. 18. Recent summer assignments not shown above: None. 19. Any other pertinent information:
• American Society of Civil Engineers, Metropolitan Section – Past President • American Society of Civil Engineers, Metropolitan Section – President, 2010 - 2011 • American Society of Civil Engineers, President Elect • American Society of Civil Engineers, Metropolitan Section – Member Scholarship Committee • American Society of Civil Engineers, Metropolitan Section, Lower Hudson Valley Branch – President, 2005 • American Society of Civil Engineers, Metropolitan Section – Secretary, 2002 - 2005 • American Society of Civil Engineers, Metropolitan Section - Director, 2001 – 2002 • American Society of Civil Engineers - Judge, Future Cities Competition • Proficient in AutoCAD - Windows XP, WordPerfect, Microsoft Word, Microsoft Excel, Microsoft PowerPoint • Wood Works Timber Design Program, RISA 3D Structural Program, TJ Beam, MD Solids • Future Cities Competition • ACE Mentoring – New York City, 2005
20. Synergistic Activities September 2008 to Present
a. City Polytechnic HS
New York College of Technology » The primary liaison between City Polytechnic HS and the professors in the Construction Management and Civil
Engineering Technology and Architectural Departments at City Tech. I assisted in curriculum development as well as being a guest lecturer at City Poly. I serve as a member of the Advisory Committee and am the co-coordinator for the City Poly H.S. Summer Bridge Program.
Date: December 11, 2011
b. Technical Coordinator & Instructor April 2001 to 2008
New York State Department of Transportation JUMP Program » Overall planning, development, coordination and implementation of the Joint Urban Manpower Program (JUMP). JUMP was part of an effort to bring disadvantaged populations into the Civil Engineering and Construction profession thru training. JUMP students are trained to become Highway Construction inspectors and CAD operators. JUMP is a partnership between Continuing Education and the Construction/Civil Engineering Technology Department. JUMP has an independent Board of Directors, who originally founded the program 36 years ago.
Executive Summary:
President American Society of Civil Engineers (ASCE) Met Section – Prof. Anthony Cioffi, P.E., M.A.S.C.E.
For the past 10 years, Professor Cioffi has served on the ASCE Met Section Board in various capacities. He was the past President of the Lower Hudson Valley Branch of the Met Section as is currently the President of the ASCE Metropolitan Section (2010 -2011).
Professor Cioffi received his A.A.S. Degree in Construction Technology from NYC Community College. He holds both a Bachelors Degree and Masters Degree from Manhattan College (home of the Jaspers!). He is a registered Professional engineer in the state of New York as well as a certified examiner for the American Concrete Institute - Field inspection of Fresh Concrete Level I.
Prof. Cioffi has over 30 years of engineering experience mainly as a geotechnical engineer for both small and large scale projects encompassing highways, bridges, rail facilities, commercial buildings, and institutional facilities. He has substantial experience in the areas of project management, residential construction, foundation engineering, prefabricated houses and modular retaining wall design.
Prof. Cioffi was elected as Chairman of the Department of Construction and Civil Engineering Technology at New York City College of Technology (City Tech) in 2004. His first ten years on the faculty at City Tech were as an adjunct professor, during which time he worked full time for EBASCO Services, NYCDEP and STV/Seelye Stevenson Value and Knecht. In addition to being a full time Professor and Chairman, Prof. Cioffi is involved with several Career and Technical Education High Schools in New York City. He is the primary liaison between City Polytechnic HS and the professors in the Construction Management and Civil Engineering Technology and Architectural Departments at City Tech. He assisted in curriculum development as well as being a guest lecturer at City Poly. Prof. Cioffi continues to work part time as an engineering consultant.
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected] EDUCATION COLUMBIA UNIVERSITY, Post-Doctoral Research Associate (2010) CUNY GRADUATE CENTER, PHD, Civil and Environmental Engineering (2010) CUNY GRADUATE CENTER, Master of Science in Civil and Environmental Engineering (2008) CITY COLLEGE of NEW YORK, Master of Engineering in Civil and Environmental Engineering (2007) ISFAHAN UNIVERSITY of TECHNOLOGY, Bachelor of Natural Resources Engineering (2002) ACADEMIC EXPERIENCE Present
2010-2011 2010- 2009 2004-2008
Assistant Professor, City University of New York, New York, NY Visiting Assistant Professor, Fordham University, New York, NY Research Associate, NOAA-CREST, New York, NY Adjunct Assistant Professor, College of Staten Island, Staten Island, NY Director of Environmental Remote Sensing and Image Processing Laboratory, City College of New York, NY Adjunct Lecturer Professor, City College of New York, NY Director of Fluid Mechanics Lab, City College of New York, NY Graduate Research and Teaching Assistant, Instructor, City University of New York
PROFESSIONAL ACTIVITIES AND TRAININGS 2011 2010 2009 2008 2007
2003
2002
• Invited Speaker and Visiting Scientist at University of Wisconsin-Madison, Space Science and Engineering Center
• Invited Speaker at Earth Institute of Columbia University, The International Research Institute for Climate and Society
• Jacobi Medical Center, Albert Einstein College of Medicine, Yeshiva University (2010) Consultant on Environmental Impact of Air Pollution and Aerosol Mapping and Modeling for Asthma Research Center
• Invited Speaker at NASA Goddard Institute for Space Studies (GISS) • Visiting Fellow, Exploring the Atmosphere: Observational Instruments and Techniques at
NCAR-Advance Study Program, Boulder, Colorado • Visiting Scientist at NOAA- Cooperative Institute for Research in the Atmosphere (CIRA),
Colorado State University, Fort Collin, Colorado • Visiting Scientist at NOAA- NESDIS Center for Satellite Applications and Research
(STAR), College Park, Maryland • TECHNIC Construction Company (Civil & Construction, Industrial, Transportation
Projects), Project Manager, (Mar 1999 - Mar 2000) - Supervised all phases of construction including foundation and fire-resistant steel structure - Prepared technical progress report and provided structural evaluations during the
construction process • STRATUS International Contracting Company, Associate Engineer, (Mar 2000 – Jan
2002) - Worked on various projects from building construction, dam, road and railways - Provided evaluation and cost estimation for construction - Assistant project manager on the field and prepared technical reports and supervised the
construction crew
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected] HONOR AND AWARDS
2006-2010 2004-2008 2004
• The National Center for Atmospheric Research (NCAR) Advanced Study Program (ASP) Summer Colloquia Fellowship
• Space Science and Engineering Center/ University of Wisconsin-Madison Collaboration Grant
• The National Oceanic and Atmospheric Administration (NOAA) Visiting Scientist Program Fellowship
• American Geological Union Conference Grant • First-place Award, Engineering Graduate Symposium, City University of New York • City University Graduate Teaching Fellowship • City University Research Travel Fellowship • American Meteorological Union Conference Grant • Graduate Center of CUNY Science Fellowship • City University Tuition Fellowship • The Mott Hall-CCNY STARS Award
GRANTS AND PROJECTS
Characterizing Environmental Factor for Climate Health Impacts and Asthma, NIH SCORE Grant, Pending Approval, January 2012- September 2015 (PI), ($450,000)
CREST Algorithm Developments for GOES-R Ice Mapping “Under a contract from NOAA”, September 1, 2008-August 30, 2009 (Co-PI), ($125,000)
Estimation of Snow Grain size and Characteristic “Under a contract from NOAA”, July 1, 2008-June 30, 2009 (Investigator), ($75,000)
The Consortium for Climate Risk in the Urban Northeast (CCRUN), funded under NOAA’s Regional Integrated Sciences and Assessments (RISA) program, January 2011- December 2015 (Investigator), ($125,000)
TEACHING 2004-Present • Fluid Mechanics
• Static and Strength of Material • Statistics and Probabilities • Hydrology and Hydraulics Engineering • Advanced Hydraulics • Surveying • Route Surveying • Mapping and Geographic Information System (GIS ) • Remote Sensing of the Environment • Earth and Atmospheric Science • Weather and Global Climate Change • Environmental Engineering • The Environmental Health and Human • Global Hazard of the Environment • Environmental Economics
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected]
• Environmental Regulations and Waste Management
BOOKS AND BOOK CHAPTERS
Rouzbeh Nazari, Co-Editor in Chief of 2012 Handbook of Engineering Hydrology
Kristin Leigh Gilroy, Richard McCuen, Saeid Eslamian and Rouzbeh Nazari, HYDROLOGIC CHANGE: The DETECTION AND MODELING OF CLIMATE CHANGE ON HYDROLOGIC PROCESSES, INTECH PUBLISHER ISBN 978-953-307-621-8
Rouzbeh Nazari et al., ENCYCLOPEDIA OF ENERGY, A Reference Work on the Role of Energy in Society Produced by Golson Media to be published by Salem Press in 2012
Rouzbeh Nazari and Saeid Eslamian, WATER QUALITY, Water Reuse and Sustainablity, ISBN 979-953-307-745-0
THESIS Rouzbeh Nazari (2010), Development of An Advanced Technique For Mapping And Monitoring Sea And Lake Ice Using Remotely Sensed Data, PhD Thesis, Department of Civil and Environmental Engineering, City University of New York
Rouzbeh Nazari (2006), Hydrodynamic Modeling of Wake Perception, Propagation and Wake-tracking in Newtonian Fluids, Master Thesis, Department of Civil and Environmental Engineering, City University of New York
Rouzbeh Nazari (2002), Impact of Water Pollution and Hydrologic Changes on Aquatic Ecosystems and Fish Population in Black River, B.E. Thesis, Department of Natural Resources Engineering, Isfahan University of Technology
JOURNAL EDITORIALS Associate Editor, Journal of Flood Engineering (JFE) Journal Referee, Atmospheric Research (Elsevier), International Journal of Hydrology Science and Technology (IJHST), Journal of the American Water Resources Association (Wiley), Reviewer, International Journal of Ecological Economic & Statistics (Elsevier), Reviewer, Research Journal of Fisheries and Hydrobiology, Research Journal of Environmental Sciences, Reviewer, Water Resources Management, Meteorology and Atmospheric Physics, Water Science and Technology, Water and Environment Journal
STUDENT SUPERVISION AND THESIS COMMITTEE Sergio H. Irizarry, PhD. candidate, Civil and Environmental Engineering, City University of New York Maryam Karimi, PhD. candidate, Environmental Economics, City University of New York Erie Green, M.S. candidate, Earth and Environmental Sciences, City University of New York Bernard MandoSmith, M.S. candidate, Civil and Environmental Engineering, City University of New York Robert Noksun, M.S. candidate, Earth and Environmental Sciences, City University of New York Magdalena Rychtecka, M.S. candidate, Civil and Environmental Engineering, City University of New York Vanessa Clark, B.S. candidate, Research Project: “Assessment of Sea Surface Temperature (SST) from MSG SEVIRI satellite”, City University of New York
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected] SELECTED PUBLICATIONS/ PRESENTATIONS
2011 2010 2009 2008 2006
Nazari, R. and Khanbilvardi, R. (2011) ‘Application of dynamic threshold in sea and lake ice mapping and monitoring’, Int. J. Hydrology Science and Technology, Vol. 1, Nos. 1/2, pp.37–46. R. Nazari, M. Temeimi and Reza Khanibilvari, Comparison of Artificial Neural Network and Stepwise Linear Regression in Seal Ice Modeling, International Journal of Environment, Accepted 12-April-2011 Rouzbeh Nazari, Pietro Cecato and Reza Khanbilvardi, Development of an Advanced Technique for Mapping and Monitoring Lower Tropospheric Relative Humidity (RH), Journal of Atmospheric Research (Elsevier), Accepted 25-Feb-2011 Rouzbeh Nazari and Reza Khanbilvardi, Fractional Ice mapping and monitoring for the future GOES-R Advanced Baseline Imager (ABI), International Journal of Terraspace Science and Engineering , 20-Nov-2010 Rouzbeh Nazari, Vanessa Clark and Reza Khanbilvardi, Assessment of Sea Surface Temperature (SST) and Normalized Difference Sea Ice Index (NDSI) Derived from MSG SEVIRI Satellite for Sea Ice Applications, International Journal of Remote Sensing, 29-June-2010 Rouzbeh Nazari, Magdalena Rychtecka, Hosni Ghedira and Reza Khanbilvardi, Stepwise Linear Regression for mapping and monitoring sea and lake ice for the future GOES-R, International Journal of Terraspace Science and Engineering , Volume I, Issue 2, June, 2009 R. Nazari, NOAA-CREST, New York, NY; and Hosni Ghedira, M. Temimi, P. Romanov, and R. Khanbilvardi, Development and validation of a BRDF model for ice mapping for the future GOES-R Advanced Baseline Imager (ABI) using Artificial Neural Network, The 88th Annual Meeting (20-24 January 2008) (New Orleans, LA) Rouzbeh Nazari, Marouane Temimi, Hosni Ghedira and Reza Khanbilvardi, NOAA- CREST, New York City, New York, An automated approach for sea ice mapping and ice fraction determination for the future GOES-R Advanced Baseline Imager (ABI), 2008 IEEE International Geoscience & Remote Sensing Symposium, July 6-11, 2008, Boston, Massachusetts, U.S.A R. Nazari, S. Mahani, and R. Khanbilvardi, Climate Changes Interaction with Tropical Storm (Hurricane), Fourth Annual NOAA-CREST Symposium, February 23-25 2006, Puerto Rico, Mayaguez R. Nazari, S. Mahani, and R. Khanbilvardi, Changes in Sea Surface Temperature and North Atlantic Hurricane Activities, AGU Joint Assembly, May 23-25 2006, Baltimore, Maryland R. Nazari, S. Mahani, and R. Khanbilvardi, Impacts of Climate Change and Tropical Storms (Hurricanes) on Coastal regions, 27th Conference on Hurricanes and Tropical Meteorology, 2006, Monterey, California
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected]
2005 2004 2003
Rouzbeh Nazari, Megan Wiley, Frank W. Grasso, Olfactory and Hydrodynamic Contributions to Wake Perception and Wake-tracking Behavior in catfish, Grant Final Report. City University of New York, June 2005 Nazari, Rouzbeh and Eslamian, S. S., Management, Optimization and Simulation for an Optimum Distribution of Water in Kalamarz Multi-Reservoir System, Mianeh Basin. 6th International Conference on Hydro science and Engineering (ICHE-2004), Brisbane, Australia, May 30-June 2, 2004. Nazari, R., Tabatabaei H., Abedi Koupai, J., A Mathematical & Management Model of Ground Water with Emphasis on Artificial Recharge for Damaneh Plain, The Second International Conference on Salt Water Intrusion and Coastal Aquifers, Mirada, Mexico, 2003 Nazari, R. and Eslamian, S. S. Hydrological Homogeneity Test of Catchments Using L-moments Diagram, International Conference on the Rational Use and Conservation of Water Resources in a Changing Environment, Yerevan, Armenia, 2003
SERVICE
2008 2007- 2005- 2004- 2004
City University of New York Member of The Board of Trustees of City University of New York Member of Chancellor’s Search Committee for Provost University Student Senate
• Chairperson • Vice Chair for Graduate Student Affair
The Graduate School and University Center Graduate Council
• Executive Committee • Faculty/Student Disciplinary Panel • Member
Doctoral Students’ Council • Executive Committee • Steering Committee • Elections Review Committee • Community Building Committee • Delegate to the University Student Senate
Doctoral Program in Civil Engineering, City University of New York • Civil Engineering Doctoral Student Council (President 2005-2007, Vice President 2004-
2005) • Delegate to the Doctoral Students’ Council • Faculty Search Student Interview Committee (Chair)
Other Coordinator of the 3rd NOAA- CREST Annual Symposium, CUNY
Rouzbeh Nazari Department of Construction Management and Civil Engineering Technology, City University of New York
186 Jay Street, Brooklyn, NY 11201 Email : [email protected] PROFESSIONAL AFFILIATIONS Since 2004 Since 2005 Since 2005 Since 2006 Since 2006 Since 2006 Since 2006 Since 2006
• American Society of Civil Engineers(ASCE) • American Meteorological Society (AMS) • American Geophysical Union (AGU) • American Water Resources Association (AWRA) • Institute of Electrical and Electronics Engineers (IEEE) • American Federation of Teachers (AFT) • New York State United Teachers (NYUST) • Professional Staff Congress of CUNY (PSC)
Curriculum Vitae of Hamidreza Norouzi
Assistant Professor Department of Construction Management and Civil Engineering Technology New York City College of Technology The City University of New York 300 Jay Street, V433, Brooklyn, NY 11201 Tel: (718) 260-5410 Fax: (718) 260-5677 Email: [email protected]
EDUCATION - Ph.D, Civil Engineering, The City University of New York – Graduate Center, 2011 - M.Phil., Civil Engineering, The City University of New York – Graduate Center, 2010 - M.S., Civil Engineering-Water, Tarbiat Modarres, 2004 - B.S., Civil Engineering, Iran University of Science & Technology, 2001 APPOINTMENTS 2011-Present Assistant Professor, The City University of New York, New York City
College of Technology. 2009-2011 Adjunct faculty, The City University of New York, New York City
College of Technology. 2007-2011 Research Assistant, NOAA- Cooperative Remote Sensing Science and
Technology Center (CREST), The City College of CUNY. 2001-2007 Civil Engineer, Arman Boruj Boland Co. PROFESSIONAL LICENSES AND CERTIFICATIONS:
- Registered Professional Engineer (P.E.) – Texas State
- American Concrete Institute (ACI) certified examiner
PEER-REVIEWED JOURNAL PUBLICATIONS Norouzi, H., M. Temimi, W. Rossow, C. Pearl, M. Azarderakhsh, R. Khanbilvardi, “The
Sensitivity of Land Emissivity Estimates from AMSR-E at C and X Bands to Surface Properties”, Hydrol. Earth Syst. Sci., 15, 3577-3589, doi:10.5194/hess-15-3577-2011, 2011.
Azarderakhsh, M., W. Rossow, F. Papa, H. Norouzi, R. Khanbilvardi, “Diagnosing water
variations within the Amazon basin using satellite data”, J. Geophys. Res., doi:10.1029/2011JD015997, 2011.
Norouzi, H., W. Rossow, M. Temimi, C. Prigent, M. Azarderakhsh, S. Boukabara, R.
Khanbilvardi, “Using Microwave Brightness Temperature Diurnal Cycle To Improve Emissivity Retrievals Over Land”, Under review.
Norouzi, H., S.A.A Salehi, F. Nasiri Saleh, M. Azarderakhsh, “Three-Dimensional numerical simulation of scour around a Spur Dike’’. Modarres Technical and Engineering Journal, No. 36, pages: 13-20, 2009.
Aghakouchak, A., A. Mehran, H. Norouzi, A. Behrangi, “Systematic and Random Error
Components in Satellite Precipitation Data Sets”, Geophysical Research Letter, under review.
CONFERENCE PAPERS AND PRESENTATIONS Norouzi, H., M. Temimi, W. Rossow, M. Azarderakhsh, R. Khanbilvardi, “Introduction
to CREST Land Emissivity Product”, AMS Annual Meeting, New Orleans, will be presented Jan 2012.
Norouzi, H., M. Temimi, W. Rossow, M. Azarderakhsh, R. Khanbilvardi, "Generating
an Effective Temperature To Improve Microwave Land Surface Emissivity Retrievals", AGU Fall meeting, San Francisco, CA, 2011.
Azarderakhsh, M., W. Rossow, H. Norouzi, R. Khanbilvardi, “Developing a routing
model based on multi-satellite data sets to better estimate P-ET”, World Climate Research Programme Open Science Conference, Denver, Colorado, 2011.
Norouzi, H., M. Temimi, W. Rossow, M. Azarderakhsh, R. Khanbilvardi, “Improvement
of land surface emissivity retrieval using diurnal variation of passive microwave”, World Climate Research Programme Open Science Conference, Denver, Colorado, 2011.
Azarderakhsh, M., W. Rossow, H. Norouzi, R. Khanbilvardi, “Developing a routing
model based on multi-satellite data sets to better estimate P-ET”, NASA-USDA ET Workshop, 2011.
Norouzi, H., M. Temimi, M. Azarderakhsh, R. Khanbilvardi, “Penetration Depth Effect
On Diurnal Variation Of Brightness Temperature and Land Surface Emissivity Retrieval”, Geoscience and Remote Sensing Symposium (IGARSS), 2011.
Norouzi, H., M. Temimi, R. Khanbilvardi, “An Automated Retrieval of Land Surface
Emissivity from Microwave Observations”, AMS annual meeting, Jan 2011. Norouzi, H., M. Temimi, R. Khanbilvardi, “Land Surface Emissivity as a Surrogate of
Soil Moisture”, AGU Fall Meeting, Dec. 2010. Norouzi, H., M. Temimi, R. Khanbilvardi, “Using Global Land Surface Emissivity as
Soil Moisture Indicator”, Proceeding of Remote sensing and hydrology symposium, Sep 2010.
Norouzi, H., M. Temimi, R. Khanbilvardi, “Development of global land surface
emissivity product at AMSR-E passive microwave frequencies”, Geoscience and Remote Sensing Symposium (IGARSS), 2010 IEEE International, IEEE-Xplor D.O.I. 10.1109/IGARSS.2010.5652464: Page(s): 280, 2010.
Norouzi, H., M. Temimi, R. Khanbilvardi, “Effect of Penetration Depth on Land Surface
Emissivity Retrieval”, 2nd-Pan GEWEX Meeting, Seattle, Aug. 2010. Norouzi, H., M. Temimi, R. Khanbilvardi, “Global microwave land surface emissivity
retrieval at the AMSR-E microwave frequencies”, 11th Specialist Meeting on Microwave Radiometry and Remote Sensing of the Environment (MicroRad), IEEE-Xplor D.O.I.: 10.1109/MICRORAD.2010.5559582, Page(s): 90 – 95, 2010.
Norouzi, H., M. Temimi, R. Khanbilvardi, “Analytical Retrieval of Global Land Surface
Emissivity Maps at AMSR-E passive microwave frequencies”, AGU Fall Meeting, San Francisco, CA, Dec. 2009
Norouzi, H., M. Temimi, R. Khanbilvardi, “Better Understandings of Land Surface.
Emissivity”, NOAA EPP Forum, Washington, DC, Nov. 2009. Norouzi, H., M. Temimi, R.Khanbilvardi, “Development of Global Land Surface.
Emissivity Map from Passive Microwave data”, NOAA Corp Symposium, New York, NY, Aug. 2009.
Norouzi, H., M. Temimi, H. Ghedira, R. Khanbilvardi, “Development of Global Land
Surface Emissivity”, NASA JPL Microwave Workshop, Oxnard, CA, Oct. 2008. Azarderakhsh, M., M. Ghodsian, H. Norouzi; "Maximum scour depth around spur
dikes", Intl. Conference on River Flow, Lisbon, Portugal, DOI: 10.1201/9781439833865.ch183, 2006.
Azarderakhsh, M.; M. Ghodsian, H. Norouzi; "Intelligent Prediction of the scour depth
around spur dikes using Artificial Neural Networks", 7th Intl. Conference on Civil Engineering, Tehran, Iran, 2005.
GRADUATE ADVISORS Graduate Advisors: Temimi, Marouane; Rossow, William; Khanbilvardi, Reza (The City College of New York, NOAA-CREST) THESIS ADVISOR AND POSTGRADUATE-SCHOLAR SPONSOR NSF-REU Graduate-Advisor: Middleton, Timothy (The City University of New York, The City College). Reynoso, Alma Cabral (The City University of New York, The City College). INVITED TALKS - Norouzi, H., The Earth System Science Interdisciplinary Center (ESSIC), University of
Maryland, “A Method To Improve Surface Emissivity Retrieval Over Land From AMSR-
E Observation”, April 2011.
- Norouzi, H., Land Surface Working Group (LSWG) Precipitation Measurement
Mission Science Team, “IMPROVE LAND SURFACE EMISSIVITY RETRIEVAL
USING MICROWAVE BRIGHTNESS TEMPERATURE DIURNAL CYCLE”, Tele-
Conference Presentation, May 2011.
- Norouzi, H., Cooperative Institute for Meteorological Satellite Studies (CIMSS),
University of Wisconsin-Madison, “Generating an Effective Temperature for Estimation
of Microwave Land Surface Emissivity”, August 2011.
AWARDS, FELLOWSHIPS AND HONORS - Science fellowship of Graduate Center of CUNY (2007 to 2011)
- Travel award of NOAA-EPP forum at Washington D.C. (2009)
- Research award, graduate center of CUNY (2009)
- NSF Young scientist award to 2nd Pan-GEWEX Science Meeting, Seattle, WA (2010)
- Research award, graduate center of CUNY (2011)
- Travel award to World Climate Research Program – Open Science Conference (2011)
PROFESSIONAL AFFILIATIONS - American Society of Civil Engineers (ASCE)
- American Geophysical Union (AGU)
- Institute of Electrical and Electronics Engineers (IEEE)
- New York Academy of Science (NYAS)
- National Oceanic and Atmospheric Administration / Cooperative Remote Sensing Science and
Technology Center (NOAA-CREST)
EDITORIAL ACTIVITIES
As Reviewer: IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
(JSTAR), International Water Association (IWA), “Extremes in a Changing Climate: Detection,
Analysis & Uncertainty” (Springer), Sensors Journal, Remote Sensing Journal, International Journal
of Hydrology Science and Technology
Page | 1
Curriculum Vitae of Gerarda M. Shields, PE Contact Information: Mailing Address: New York City College of Technology
Department of Construction Management and Civil Engineering 300 Jay Street, V431 Brooklyn, NY 11201 Telephone: (718) 260-5587 E-mail: [email protected] Website: http://www.linkedin.com/in/gerardashields
Professional Preparation Ph.D., Civil Engineering, The City College, New York, NY (expected completion 2011) M.S. Civil Engineering, Manhattan College, Riverdale, NY, 2004 B.S. Civil Engineering, Manhattan College, Riverdale, NY, 2003 Professional Engineering (P.E.) License, 2006
Appointments 2007 – present: Assistant Professor - NYC College of Technology 2010 – present: Adjunct – Manhattan College 2005 – 2007: Lecturer - NYC College of Technology
Courses Taught at the College/University Level Statics, Fluid Mechanics and Laboratory, Soil Mechanics and Laboratory, Construction Management, Steel Design, and Concrete Design Consulting Experience Hardesty & Hanover, LLP, New York, NY Hydraulic Engineer, July 2006 - present (part-time) Project Engineer, June 2003 – August 2005 (full-time) Responsibilities include: routine and emergency monitoring of scour critical bridges; interpretation of data; development of contract drawings, specifications, cost estimates and bid packages for scour monitoring instrumentation; construction support services and inspection; development of the Scour Monitoring Program Manual for Long Island Bridges (2nd Edition); and NCHRP Synthesis research on fixed scour monitoring instrumentation. Publications (Peer Reviewed) Shields, G.M., King, P.C., (2010). “City Polytechnic High School: An Interdisciplinary
Approach to Architectural and Civil Engineering Technology Studies,” American Society of Engineering Education Northeast Regional Conference.
Hunt, B.E., Price, G.R., Shields, G.M., (2007). “Practices for Monitoring Scour Critical Bridges.” ERWI Conference, Tampa, FL.
Briaud, J.L., Hunt, B.E., Shields, G.M., (2006). “Scour of Bridge Foundations.” GeoCongress Conference, Atlanta, GA.
Page | 2
Publications (Non Peer Reviewed) Shields, G.M., King, P.C., (2009). “Synergy in STEM: City Polytechical High School – An
Interdisciplinary Approach to STEM Studies.” CUNY STEM Conference. Books Chapter Contributions Hunt, B.E. (2010). NCHRP Synthesis 396: Monitoring Scour Critical Bridges,
Transportation Research Board, Washington, DC. Synthesis team members: Nicholas J. Altebrando, STV Incorporated; Gerald R. Price, ETI Instrument Systems Inc.; and Gerarda M. Shields, New York City College of Technology
Peer Review of Books and Journals Aghayere, A., Vigil, J. (2008). Structural Steel Design: A Practice-Oriented Approach. 1st
Ed., Prentice Hall, New York. Peer reviewed textbook in 2007. Received Grants and Fellowships: Perkins II Grant ($45k) 2007-2008 Lorraine Beitler Student Endowment Fund ($665) 2007 Excellence in Civil Engineering Education (ExCEEd) Teaching Fellow ($2075) 2006
Awards and Honor Societies ASCE Met Section Young Government Civil Engineer of the Year Award, June 15, 2007 Tau Beta Pi Honor Society (2002 – present) Chi Epsilon Honor Society (2002 – present)
Society Affiliations American Society of Civil Engineers (2004 – present) American Geophysical Union (2011 – present) Society of Women Engineers (1999 – 2007) New York State Engineering Technology Association (2005 – 2007)
Professional Development: NHI Stream Stability and Scour at Highway Bridges, course, 2005 USACOE Stream Investigation, Stabilization and Restoration, course, 2004 AREMA Stream Stability and Scour at Railroad Bridges, course, 2002 PADI Open Water Diver, 2001; Dry Suit, 2004; Advanced, In Progress
M.Villatoro Curriculum Vitae Page 1 of 2 Lasted Updated: 11/28/2011
Melanie L. Villatoro, PE New York City College of Technology 300 Jay Street, V430 Brooklyn, NY 11201 CURRICULUM VITAE – April 2010 1. Name: Melanie L. Villatoro, PE 2. Department: Construction Management and Civil Engineering Technology 3. Age: 29 4. Academic Rank: Assistant Professor 5. Degrees:
Master of Science, Civil Engineering, Columbia University, May 2005 Bachelor of Engineering, Civil Engineering, The Cooper Union for the Advancement of Science and Art, May 2002
6. Number of years of service on this faculty: Assistant Professor: commencing August 26, 2009 (present)
7. Other teaching experience:
8. Full-time industrial experience: Langan Engineering & Environmental Services , Assistant Project Manager, August 2008 – July 2009; Senior Staff Engineer September 2005 - August 2008. Responsibilities included: managing jobs of various scopes and complexity throughout the tristate area for residential, commercial and waterfront developments; planning subsurface investigations and testing; designing of excavation support, foundation design (shallow and deep; soil and rock), slope stability analysis, inspecting pile load testing, inspecting pile driving, inspecting sub-grade and footing construction, designing and inspecting bulkhead rehabilitation, evaluating laboratory analytical data, settlement analysis and preparing geotechnical reports. AECOM DMJM Harris , Geotechnical Engineer, June 2002 - September 2005 Responsibilities included: planning subsurface investigations and testing; designing of excavation support, foundation design (shallow and deep; soil and rock), slope stability analysis, evaluating laboratory analytical data, settlement analysis and preparing geotechnical reports.
9. Part-time industrial experience: 10. Consulting work: 2009-Present
Geotechnical, Involved in design and inspection of subsurface investigation and retaining wall design.
11. Professional recognition:
Professional Engineer - The State of New York: License #084919-1, April 2007 12. Principal publications in the last 5 years: 13. Scientific and professional societies of which a member:
American Society of Civil Engineers, Associate Member 2002-present; NY Metropolitan Section Treasurer 2008-2010; Younger Member Forum Member 2004-2009; Scholarship Committee Member 2008-Present; Future City Competition Treasurer, 2004-Present. Society of Women Engineers, Member, 2010-Present. Society of Hispanic Professional Engineers, Member, 2009-Present.
M.Villatoro Curriculum Vitae Page 2 of 2 Lasted Updated: 11/28/2011
14. Honors and awards: 15. Professional development: 16. Other duties performed for regular base salary during academic year, with average hours
per week: Faculty Advisor – SHPE Student Club (3 hours) Chair – student outreach for high school students (3 hours) Institutional Representative – NYSETA (1 hour) Member – Department curriculum change and development (2 hours) Faculty Liasion – Learning Center (1 hour)
17. Other duties performed for extra compensation during the academic year, with average hours per week:
Curriculum Development– Carpe Diem (2.5 hours over 5-7 weeks) 18. Recent summer assignments not shown above: 19. Other pertinent information: Proficient in: Microsoft Office, AutoCAD, SPW911 – sheet pile analysis, Driven – axial pile capacity, and LPile – lateral load analysis
Date Submitted to the Board of Trustees: XXXXXXXXX
APPENDIX K ‐ ARTICULATION AGREEMENT BETWEEN
THE BOROUGH OF MANHATTAN COMMUNITY COLLEGE &
THE BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
Borough of Manhattan Community College of the City University Of New York Articulation Agreement Form A. Sending and Receiving Institutions:
Sending College: Borough of Manhattan Community College Receiving College: New York City College of Technology
Department: Science Department: Construction Management and Civil Engineering Technology
Program: Engineering Science
Program: Bachelor of Technology in Construction Engineering Technology
Degree: A.S. Degree: B. Tech.
B. Admission Requirements for the Senior College Program: Borough of Manhattan Community College (BMCC) and New York City College of Technology hereby enter into this agreement to facilitate an opportunity for students who wish to transfer from BMCC’s Associate of Science in Engineering Science to New York City College of Technology’s Bachelor of Technology in Construction Engineering Technology. This agreement specifies the conditions and requirements necessary for BMCC students to transfer to New York City College of Technology. All students transferring from BMCC’s Associate of Science in Engineering Science Program to New York City College of Technology’s Bachelor of Technology in Construction Engineering Technology program must meet the following general requirements:
1) Students must have a cumulative grade point average of at least 2.5 on a 4.0 scale.
2) New York City College of Technology will accept transfer credits only, not course grades.
3) Except for students entering with an Associate Degree, all courses must be completed with a grade of “C” or higher to be accepted as transfer.
4) A maximum of 66 semester credits will be accepted towards the Bachelor of Technology in Construction Engineering Technology if the student completes an Associate Degree in Engineering Science at BMCC.
5) Students eligible for transfer to New York City College of Technology under this agreement must have met at least the minimum requirements for admission to BMCC.
C. Course to Course Equivalencies and Transfer Credit Awarded
Borough of Manhattan Community College New York City College of Technology General Requirements
Course & Title Credit Course & Title Credit Tr. Credit
ENG 101: English Composition I 3 ENG 1101: English Composition I 3 3
ENG 201: English Composition II 3 ENG 1121: English Composition II 3 3
MAT 301: Analytic Geometry and Calculus I 4 MAT 1475-Calculus I 4 4
MAT 302: Analytic Geometry and Calculus II 4 MAT 1575-Calculus II 4 4
MAT 303: Analytic Geometry and Calculus III 4 MAT 2675-Calculus III 4 4
MAT 501: Ordinary Differential Equations 3 MAT 2680-Differential Equations 3 3
ECO 201: Macroeconomics ( social sci. elect ) 3 Macroeconomics 3 3
Social Science Elective 3 Is equivalent to social science Elective Credit
3 3
SPE 100 or SPE 102: Fundamentals of Speech 3 SPE 1330-Effective Speaking 3 3
Total General Credits 30 30 30
Borough of Manhattan Community College New York City College of Technology Program Requirements
Course & Title Credit Course & Title Credit Tr. Credit
ESC 111: Engineering Design 1 Is equivalent to Elective Credit 1 1
ESC 113: Computer Aided Engineering Analysis 2
Is equivalent to Elective Credit 2
2
CHE 201: College Chemistry I 4 CHE 1110-General Chemistry I 4 4
CHE 202: College Chemistry II 4 CHE 1210-General Chemistry II 4 4
PHY 215: University Physics I 4 PHYS 1441-Physics 1.3 5 4
PHY 225: University Physics II 4 PHYS 1442-Physics 2.3 5 4
SCI 120: Computer Methods in Science (C++) 4 Is equivalent to Elective Credit 4 4
Total Curriculum Credits 23 25 23
Borough of Manhattan Community College New York City College of Technology Program Electives ( select at least 13 credits from courses below )
Course & Title Credit Course & Title Credit Tr. CreditCHE 230: Organic Chemistry I 5 CHE 2223-Organic Chemistry I 5 5 CHE 240: Organic Chemistry II 5 CHE 2323- Organic Chemistry II 5 5 ESC 201: Engineering Mechanics I ( Statics ) 3 (CMCE 1104+ CMCE 1204) 3
3
ESC 211: Thermodynamics I 3 MT 330-Thermodynamics 3 3 ESC 221: Circuits and Systems I 4 May receive elective credit if
Associate Degree is obtained 4 4
ESC 223: Switching Systems and Logic Design I 3 May receive elective credit if Associate Degree is obtained
3
3
PHY 240: Modern Physics 3 PHYS 2443- Physics 3.3 3 3 MAT 315: Linear Algebra 3 MAT 2580-Introduction to Linear
Algebra 3
3
GLY 210: Geology 4
Technical elective 3 3
Total elective credits 13 13 13
Total Transferable Credits From BMCC 66
D. Senior College Courses Remaining for the Baccalaureate Degree
CODE TITLE CREDITS CMCE 1110 Construction Drawings I 2 CMCE 1114 Methods & Materials of Construction I 3 CMCE 1210 Construction Drawings II - Introduction to AutoCAD 1 CMCE 1220 Construction Management I 2 CMCE 1222 Surveying I 3 CMCE 1224 Methods & Materials of Construction I 2 CMCE 2315 Elements of Structural Design-Steel 3 CMCE 2306 Materials Testing laboratory 2 CMCE 2320 Construction Management II 2 CMCE 2322 Route Surveying and Site Development 3 CMCE 2352 Soil Mechanics 3 CMCE 2410 Construction Drawing s III - Intermediate AutoCAD 2 CMCE 2412 Construction Estimating 2 CMCE 2415 Elements of Structural Design-Concrete 3 CMCE 2419 Building Service Systems 2 CMCE 3501 Steel Fabrication Detailing 3 CMCE 3601 Building Codes and Regulations 2 CMCE 3602 Real Estate Development Fundamentals 3 ARCH 2450 Sustainability Through Architecture 3 CMCE 4700 Heavy Construction Practices 2 CMCE 4701 Construction Field Management 3 CMCE 4702 Construction and Site Safety Management 3 CMCE 4800 Construction Law 3 CMCE 44XX Required Technical electives 6
Total Credits to be Completed by BMCC Students at New York City College of Technology for the Bachelor of Technology in Construction Engineering Technology.
63
E. Articulation Agreement Follow-up Procedures
CHANGES
Neither party may change this agreement unilaterally. Proposed changes in policies or curricula by either party must be communicated in writing to the other party and agreed upon in consultation with relevant officials of each institution. Any changes agreed upon must be signed, dated, and attached to this agreement.
NOTICE OF CANCELLATION
Either party may independently cancel this agreement by notifying the other party no less than one academic year before the intended date of cancellation.
APPENDIX L – LETTERS FROM EMPLOYERS
FOR THE
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
A M E R I C A N S O C I E T Y O F C I V I L E N G I N E E R S
P.O. Box 7916 New York, NY 10116
http://www.ascemetsection.org
January 12, 2012 Dr. Bonne August, PhD Provost New York City College of Technology of the City University of New York 300 Jay Street Brooklyn, NY 11201 Re: Letter of Support Dear Provost August:
On behalf of the ASCE Metropolitan Section, I am pleased to provide this letter of support for the proposed Bachelor of Technology degree in Construction Engineering Technology. The American Society of Civil Engineers is the leading professional association for Civil Engineers and Construction Managers in the world and is 1 of 31 member societies who determine the standards for ABET accreditation.
The Met Section is proud to support the creation of new programs that will help develop engineering and construction professionals in New York City and beyond. The proposed program in Construction Engineering Technology is much needed as it will provide additional educational opportunities for those students wishing to enter the fields of Construction Management and Civil Engineering.
Over the past several years, we have become very familiar with your Construction Management and Civil Engineering Technology programs through your students participation as a Met Section ASCE Student Chapter. We have always found New York City College of Technology to be a leader in the area of professional development of students. Your previous successes in training construction professionals in New York City will only be enhanced by the creation of this new program. The Met Section is excited to support your efforts.
Good luck in your efforts to bring this program online. We know that it will be a great success. If there is anything additional that you need or that the Met Section can do, please feel free to contact me.
Sincerely,
Chase DeRose, Sr. M.ASCE President ASCE Metropolitan Section
PRESIDENT CESARE (CHASE) DEROSE, SR., P.E. AECOM ONE WORLD FINANCIAL CENTER, 25TH FLOOR 200 LIBERTY STREET NEW YORK, NY 10281 PHONE: (212) 798‐8637 FAX: (212) 978‐8501 [email protected] PRESIDENT‐ELECT JOSEPH ENGLOT, P.E. VICE PRESIDENT STEVE KAUFMAN, P.E. SECRETARY GERARDA M. SHIELDS, P.E. TREASURER JASON L. STERN, P.E. PAST PRESIDENTS
ANTHONY CIOFFI, P.E. (2010‐11) CRAIG RUYLE, P.E. (2009‐10)
DIRECTORS ARTHUR ALZAMORA, P.E. YURI ESTRADA, LEED, AP HENRY W. HESSING , P.E., F.ASCE MICHAEL S. MACNEIL, P.E. ERIK METZGER ALBERT POZOTRIGO, P.E. DIRECTORS (EX‐OFFICIO) ROBERT ERVOLINA, P.E. DANIEL ESPINOSA RAPLH RUGGIERO, P.E YOUNGER MEMBER FORUM CHI ZHANG, P.E. LONG ISLAND BRANCH JASON CHEN, P.E. LOWER HUDSON VALLEY BRANCH GERARD P. BRADY, P.E., ESQ. TECHNICAL GROUPS Air Transport WILLIAM A. FIFE, P.E. DAVID CONGER, P.E. CEs in Government JOHN DIMILIA, P.E. Construction DOUGLAS CASTELLI Forensic Engineering PAUL ROPPA, P.E. Geotechnical GIANNI CHIERUZZI, P.E. Infrastructure JAGTAR S. KHINDA, P.E., F.ASCE International ISMAIL KARATAS, PH.D. Structures AMAHID ANDONIAN, P.E.
105 Tech Place, Brooklyn, NY 11201
Phone: 718-875-1473 Fax: 718-875-1947 Website: www.citypolyhigh.org
January 12, 2012
Dr. Bonne August Provost New York City College of Technology of the City University of New York 300 Jay Street Brooklyn, New York 11201 Re: Letter of Support Dear Provost August: On behalf of City Polytechnic High School of Engineering, Architecture, and Technology (City Poly), I am pleased to provide this letter of support for the proposed Bachelor of Technology degree in Construction Engineering Technology. The mission of City Poly is to prepare students with the academic knowledge, technical skills, and real-world experiences they need to succeed in the 21st century global economy. As you know, our Early College High School curriculum allows students to complete both their academic and their career and technical education (CTE) high school requirements in just three years of study and then to move directly into your full-time associate’s degree program. Our partnership with City Tech and CUNY’s Early College Initiative is paving the way for our students’ smooth transition into college. During our four-year partnership with City Tech, we have worked closely and successfully with the chair and with several professors in Construction Management and Civil Engineering Technology. We have firsthand knowledge of the course of study in that department. We believe that the proposed bachelor’s degree program in Construction Engineering Technology is timely in that it will provide further educational opportunities for our own students who are starting at City Tech in the fall. A number of them would be far happier to start at City Tech if they knew that they could go straight through and earn a bachelor’s degree through this department. The proposed Bachelor of Technology Degree in Construction Engineering Technology will allow our students to continue their education at an affordable cost within CUNY and without worrying about transferring to another college or program. We are excited to support your efforts in creating this degree. City Poly strongly supports this proposal. If you need additional information, please do not hesitate to contact us. Sincerely, Regina H. Paul Co-Founder
M & J Engineering, P.C. One Cross Island Plaza Suite 213 Rosedale New York 11422
Tel: 718 525 5500 Fax 718 228 8411 Web: www.mjengineers.com
January 12, 2012 Dr. Bonne August, PhD Provost New York City College of Technology of the City University of New York 300 Jay Street Brooklyn, New York 11201 Re: Letter of Support Dear Provost August:
On behalf of M&J Engineering, P.C., I am pleased to provide this letter of support for the proposed Bachelor of Technology degree in Construction Engineering Technology.
We are proud to support the creation of new programs that will help develop engineering and construction professionals in New York. The active professionals in the field of Construction have never had an opportunity, in the past, to acquire the type of degree that your program proposes. Future students wishing to enter the fields of Construction Management and Civil Engineering will be the direct beneficiaries of such a unique program
We, at M&J Engineering, support this proposal. If we can provide additional assistance, please do not hesitate to contact us.
Sincerely,
CC:M&J Files
Albert Pozotrigo Executive Vice President
M & J Engineering, P.C.
APPENDIX M – APPLICATION FOR REGISTRATION OF A NEW PROGRAM (SED)
FOR THE
BACHELOR OF TECHNOLOGY (BTECH) IN
CONSTRUCTION ENGINEERING TECHNOLOGY
1
THE STATE EDUCATION DEPARTMENT / THE UNIVERSITY OF THE STATE OF NEW YORK / ALBANY, NY 12234
Application for Registration of a New Program1 This application is for New York degree-granting institutions seeking to register a new program that is below the doctoral level. Save this file, enter the requested information, and submit to the State Education Department. Proposals for new distance education, teacher certification, educational leadership certification, and professional
licensure programs may require additional information, in addition to this core application. Certificate and advanced certificate proposals: use the certificate forms at www.highered.nysed.gov/ocue/. This
expedited option is not available for teacher, educational leader, or professional certification/licensure programs. Item Response (type in the requested information) Program type Check program type(s)
X_ General academic program
__ Program to prepare certified teachers or certified educational leaders
__ Program to prepare licensed professionals
Institution name and address
New York College of Technology The City University of New York (CUNY) 300 Jay Street Brooklyn, New York 11201 Additional information: Specify campus where program will be offered, if other than the main campus: Main Campus If any courses will be offered off campus, indicate the location and number of courses and
credits: Not Applicable Program title, award, credits, and proposed HEGIS code
Program title: Construction Engineering Technology Award (e.g., B.A., M.S.): B Tech Credits: 124 (2 + 2 degree, A.A.S (64) + 60 Proposed HEGIS code:
Program format Check all program scheduling and format features that apply: (See definitions)
i) Format: x Day Evening Weekend x Evening/Weekend Not Full-Time
ii) Mode: x Standard Independent Study External Accelerated Distance Education (submit distance education application with this proposal)
iii) Other: Bilingual Language Other Than English Upper Division Program
Diploma Programs
If the program is credit bearing and will lead to a Diploma or Advanced Diploma, indicate the registered degree program(s) to which the credits will apply:
Contact person for this proposal
Name and title: Prof. Anthony Cioffi, P.E. Chairman The Department of Construction Management & Civil Engineering Technology
Telephone: (718) 260-5575 Fax: (718) 260-5677 E-mail: [email protected]
CEO (or designee) approval Signature affirms the institution’s commitment to support the proposed program.
Name and title: Russell K. Hotzler, Ph.D. President Signature and date:
If the program will be registered jointly2 with another institution, provide the following information:
Partner institution’s name: Not Applicable Name and title of partner institution’s CEO:
Signature of partner institution’s CEO:
1 CUNY and SUNY institutions: contact System Administration for program registration guidance. 2 If the partner institution is non-degree-granting, see CEO Memo 94-04.
2
Program registration is based on standards in the Regulations of the Commissioner of Education. Section 52.1defines the curricula that must be registered. The Department registers individual curricula rather than the institution as a whole, but the registration process addresses major institutional elements. It is the chief means by which the Regents support the quality of college and university programs. Please enter the requested information about the proposed program.
1. Program Description and Purpose a) Provide a brief description of the program as it will appear in the institution’s catalog.
Answer: The Construction Engineering Technology program is the only program of its kind in the City University of New York (CUNY) system. Graduates of this program will have the necessary technical skills for careers in construction management; engineering, construction operations and/or maintenance of the built environment; and infrastructure. All facets of the construction process are studied, including construction materials and methods, management and building systems as well as all elements of structural design. Both the public and private sectors are studied from the time the project is conceptualized until it is turned over to an owner. The program combines an emphasis on construction management with the principles of engineering. This degree includes within its core of construction management courses important components of mathematics, physics and engineering to give the entry-level construction manager a variety of technical skills, including an understanding of basic structural analysis and design. Additional technical skills are developed as they relate to project layout (surveying) and materials testing, including training for The American Concrete Institute certification as Field Inspector (Level 1) of Fresh Concrete. Graduates will be able to specify project methods and materials, perform cost estimates and financial analyses and manage construction activities. They will be able to plan, design, inspect and direct projects involving residential, commercial and public works projects. Graduates of this program are prepared for immediate employment in every phase of construction and engineering. Most graduates will be hired by governmental agencies, consulting engineers, architects, contractors and developers. Occupational titles include: construction manager, construction engineer, superintendent, estimator, assistant project manager, field engineer, safety director, and inspector. The BTech in Construction Engineering Technology is designed as a 2+2 program where students may choose to first complete the two year Associates degree in either Civil Engineering Technology of Construction Management Technology. Upon completion of the AAS degree students can continue their formal education to earn the Bachelor of Technology in Construction Engineering Technology (CET) degree. Students from other departments within NYCCT and other institutions with related backgrounds would also be able to pursue the BTech degree
b) List educational and (if appropriate) career objectives. Answer: The educational objectives of the Bachelor of Technology in Construction Engineering Technology will prepare graduates with the technical skills necessary for careers in construction, operation and maintenance of the built environment, and global infrastructure. The department has adopted the student learning and career outcomes approved by ABET, Inc – the national accrediting body for technology and engineering programs. Graduates of this program will have demonstrated (as per ABET Criterion 9 for bachelor of technology programs in construction engineering technology):
1. producing and utilizing design, construction, and operations documents; 2. performing economic analyses and cost estimates related to design, construction, and maintenance of
systems in the construction technical specialties; 3. selecting appropriate construction materials and practices; 4. applying principles of construction law and ethics; 5. applying basic technical concepts to the solution of construction problems involving hydraulics and
hydrology, geotechnics, structures, construction scheduling and management, and construction safety; 6. performing standard analysis and design in at least one recognized technical specialty within
construction engineering technology that is appropriate to the goals of the program.
3
c) How does the program relate to the institution’s mission and/or master plan? Answer: The addition of this program stems from a response to regional economic needs; driven by the demand for construction management professionals and the availability of the program to students of all economic backgrounds. The proposed BTech degree will strengthen our current program by providing all of our students with access to an advanced degree and a gateway to their career and economic goals. The goals of the proposed BTech are parallel with those of the college in preparing a technically proficient workforce and well educated citizens.
d) Describe the role of faculty in the program’s design. Answer: The faculty was involved in developing the curriculum for all the courses in the program, including learning objectives, lesson plans, assignments and grading rubrics. Faculty was responsible for selecting all texts and references and developing courses compatible with programs at other institutions and in compliance with ABET standards. As practicing professionals and experts in their field, the faculty was able to incorporate current trends and new technology into each course.
e) Describe the input by external partners, if any (e.g., employers and institutions offering further education). Answer: The department has sought the advice and feedback from our industry Advisory Board which includes professionals from the private and public sectors of civil engineering and construction management. The Advisory Board recommended and commented on course offerings which reflect a broader and more technical skill set. Their feedback assisted the department in the development of the educational objectives for the program. Alumni and employer comments obtained from the Alumni and Employers Surveys were also considered.
f) What are the anticipated Year 1 through Year 5 enrollments? Answer: Based upon the surveys conducted, comparisons with other related departments of similar size, and the trend for requiring a bachelor’s degree in order for graduates to obtain upper level construction management positions, projected student enrollment in the BTech degree for the next five years is shown in Table 2 below.
Table 2 Sample Student Enrollment Table1
1. The enrollment data is based on a Student Enrollment Survey taken of 424 students taken in the Spring 2010. Year I enrollment is based on 43% of the total student survey total (424 x .42 = 182). This was used as the starting or baseline number for the enrollment projections
2. The values shown above are based on estimates (FT versus PT) using the Spring 2011 Enrollment Statics for both the CM & CV programs: FT = 56% (Average CM + CV) PT = 44% (Average CM + CV)
3. City Tech data was used to estimate the increase in new students for the CMCE between the Fall 2010 and Spring 2010 semesters. Typical student enrollment increase ranged from 14% ‐ 18% (CM + CV). A 16% average was used to project the increase in enrollment in Year II.
4. A 75% retention rate was used to project the number students continuing in the B Tech program. 33% graduation rate was considered. 5. A 20 % rate was used to project the increase in B Tech enrollment in Year III, IV & V.
YEAR I1 Fall + Spring
YEAR II Fall + Spring
YEAR III Fall + Spring
YEAR IV Fall + Spring
YEAR V Fall + Spring
New Cont. New3 Cont.4 New5 Cont.4 New5 Cont.4 New5 Cont.4 F‐T2 102 0 32 77 37 80 43 78 43 84 P‐T2 80 0 26 60 30 65 35 71 35 54
Sub‐totals 182 0 58 137 67 147 78 149 78 138 Totals 182 195 214 227 216
4
2. Sample Program Schedule Complete Table 1a (for undergraduate programs) or Table 1b (for graduate programs). If the program will be offered through a nontraditional schedule, provide a brief explanation of the schedule,
including its impact on financial aid eligibility. For existing courses that are a part of the major, submit a copy of the catalog description. For undergraduate
programs, provide syllabi for all new courses in the major; for graduate programs, provide syllabi for all new courses. Syllabi should include a course description and identify course credit, objectives, topics, student outcomes, texts/resources, and the basis for determining grades. Answer: See Table 1a & Appendix B of the Full Proposal
3. Faculty a) Complete the faculty tables that describe full-time faculty (Table 2), part-time faculty (Table 3), and
faculty to be hired (Table 4), as applicable. Faculty curricula vitae should be provided only by request.
b) What is the institution’s definition of “full-time” faculty? Answer: See CUNY By-Laws
4. Financial Resources and Instructional Facilities a) Summarize the instructional facilities and equipment committed to ensure the success of the program.
Answer: See Full Proposal b) Complete the new resources table (Table 5).
5. Library Resources a) Summarize the analysis of library resources for this program by the collection librarian and program
faculty. Include an assessment of existing library resources and their accessibility to students.
b) Describe the institution’s response to identified needs and its plan for library development. Answer: See Full Proposal
6. Admissions a) List all program admission requirements (or note if identical to the institution’s admission
requirements).
Answer : Students wishing to enter the Bachelor of Construction Engineering Technology program can enter the program in several ways. Students, who enter the program as freshman, must meet the College requirements. The College has established the following minimal standards for direct admission of freshmen into baccalaureate programs. Students applying for admission to a baccalaureate program will be evaluated for admission according to a formula that considers preparation in high school English and mathematics, high school average, and College Preparatory Initiative units. Each college of The City University will use such a formula to identify students who currently have the ability to do baccalaureate level work. Additionally, all students must have demonstrated competency in reading, writing and mathematics in order to enroll in baccalaureate degree programs.
For admissions and advisement purposes, freshman applicants who graduated from high school within the previous academic year will also be required to provide the University with scores for the SAT examination. The SAT requirement does not apply to students who completed their secondary instruction outside the United States, who are classified as ESL students or who graduated from high school more than one year before their application to the College.
5
Students who do not meet these guidelines maybe admitted into the AAS degree in either Civil Engineering Technology or Construction Management Technology and apply for transfer into the BTech program after achieving CUNY proficiency in reading, writing and mathematics. Students who enter the AAS degree in Civil Engineering Technology or Construction Management Technology in a 2 + 2 sequence must have a minimum Grade Point Average (GPA) of 2.5 for admittance to the B Tech program. Students may also enter from other programs either here at City Tech of from other colleges. It is not necessary to have earned an associate degree from these colleges. Transcripts of transfer students will be evaluated to determine the courses they must complete for the Bachelor of Technology degree in Construction Engineering Technology. The department has an articulation agreement with the Borough of Manhattan Community College (BMCC). Students from BMCC who complete the course requirements for the AS degree in Engineering Science will not be required to complete more than 63 credits for the Bachelor of Technology degree.
b) Describe the process for evaluating exceptions to those requirements.
Answer:
c) How will the institution encourage enrollment by persons from groups historically underrepresented in the discipline or occupation? Answer:
7. Academic Support Services Summarize the academic support services available to help students succeed in the program.
Summarize the Academic Support Services Available Answer: Faculty Office Hours- Faculty is available to students during office hours as well as by appointment when additional time is necessary. Faculty is also available to answer questions through email. Blackboard – All documents distributed in class are available to students through Blackboard, including notes, handouts and assignments. Announcements and email can also be posted through Blackboard. The Learning Center – Students have access to all the learning centers on campus, students enrolled in the BTech will have access to the technology learning center which houses textbooks, equipment, and computers complete with software used in program courses. Tutoring is also available to students in the learning center. Peer Tutoring- Core classes include a peer tutoring component in addition to lecture hours. These peer tutoring sessions are organized by the faculty and supported by the students. Students attend peer tutoring for additional assistance on assignments and lectures.
8. External Review of Graduate Degree Programs If the proposal is a graduate degree program below the doctoral level, submit a copy of an evaluation (Word) (PDF) of the program by a recognized expert in the field who has been approved in advance by the State Education Department. In addition, submit the institution’s response to the evaluation and highlight how the proposal was modified in response to the reviewer’s comments.
9. Credit for Experience If this program will grant substantial credit for learning derived from experience, describe the methods of evaluating the learning and the maximum number of credits allowed. Answer: N.A.
6
Items 10 through 12 are for general academic and professional licensure program proposals only.
10. Program Assessment and Improvement Summarize the plan for periodic evaluation of the new program, including the use of data to inform program improvement. Answer: The Department of Construction Management and Civil Engineering Technology implemented a Continuous Quality Improvement (CQI) plan in 2001. The CQI plan outlines the assessment, evaluation, frequency of evaluation, coordinators and actions taken to improve student learning to meet the program’s educational objectives. The educational objectives of the department are:
1. Be employed as engineering technicians, inspectors, assistant project managers or CADD operators, 2. Pursue advanced degrees in civil engineering and construction or facilities management, 3. Work towards obtaining professional licensure, and 4. Progress towards management or technical positions in the civil engineering and construction industries.
The department has adopted the student learning outcomes approved by ABET, Inc – the national accrediting body for technology and engineering programs. Our associates degree in Civil Engineering Technology is an ABET accredited program, and it is our plan to work towards the accreditation of the proposed bachelor of technology program. This process will begin by with an update of the CQI to include the ABET student learning outcomes for a bachelor of technology in construction engineering. As previously stated, the student learning outcomes are:
1. producing and utilizing design, construction, and operations documents; 2. performing economic analyses and cost estimates related to design, construction, and maintenance of
systems in the construction technical specialties; 3. selecting appropriate construction materials and practices; 4. applying principles of construction law and ethics; 5. applying basic technical concepts to the solution of construction problems involving hydraulics and
hydrology, geotechnics, structures, construction scheduling and management, and construction safety; and
6. performing standard analysis and design in at least one recognized technical specialty within construction engineering technology that is appropriate to the goals of the program.
Once the CQI is updated, data will be collected, assessed and evaluated over a period of 3-5 years. Actions will be taken to improve the program, and the department will submit an application to ABET for accreditation. This is the same process that is followed for our associate program. Some highlights from the CQI of actions taken to improve the student learning are:
1. Feedback from the department’s Advisory Board (in 2007) indicated that employers are looking for improved communication skills. As a result, faculty incorporated more presentations, papers, and reports in courses. Faculty were also encouraged to emphasize grammar and spelling on all submitted student work.
2. Student surveys beginning in 2007 revealed that more students were continuing their education to the bachelor level and would be interested in a program within the department if it were offered. This led to the proposal for bachelor of technology in construction engineering technology.
3. In 2008, feedback from graduate surveys has revealed that software used in the classroom was outdated. This led to the incorporation of new software in that was more commonly used in industry in the CMCE 2315, 1210, 2410, and 2351 courses. In particular, the department modified the curriculum to CMCE 1210 and 2410 to progress students towards more advanced applications of computer aided design (CAD).
4. In order to better measure student’s ability to conduct standard experiments in soil testing, the department incorporated the National Institute for Certification in Engineering Technologies (NICET) exam. This national, standardized exam gives students certification in soils testing and is used as a
7
credential for employment. The first exam was offered by our department in May 2009.
11. New/Emerging Field and Allied Health Areas (Undergraduate Degree Programs) If the proposal for an undergraduate degree program falls into any of the following categories, submit a copy of an evaluation (Word) (PDF) of the program by a recognized expert in the field who has been approved in advance by the State Education Department. In addition, submit the institution’s response to the evaluation and highlight how the proposal was modified in response to the reviewer’s comments. Categories:
The program’s subject matter represents a new or emerging field. The program is in an allied health area, unless the institution can demonstrate that the program is
accredited by an accrediting body for college-level programs in the field.
12. Transfer to Baccalaureate Programs If the program will be promoted as preparing students for transfer to a baccalaureate program, provide a copy of an articulation agreement with at least one institution. Revised: January 21, 2012
8
Table 4: Faculty to be Hired If faculty must be hired, specify the number and title of new positions to be established and minimum qualifications.
Title/Rank of Position No. of New Positions
Minimum Qualifications (including degree and discipline area)
F/T or P/T Percent Time to Program
Expected Course Assignments
Expected Hiring Date
NONE 0 ___ ___ ___ ___ ___
9
Table 5: New Resources List new resources that will be engaged specifically as a result of the new program (e.g., a new faculty position or additional library resources). New resources for a given year should be carried over to the following year(s), with adjustments for inflation, if they represent a continuing cost.
New Expenditures Year 1 Year 2 Year 3
Personnel $0 0 1 FT CLT($42,000 Base)
$55,860 w/fringes
Library $500 $500 $500
Equipment $0 $0 $0
Laboratories $0 $2,000 $0
Supplies & Expenses (Other Than Personal Service)
$0 $0 $0
Capital Expenditures $0 $0 $0
Other
Total all $0 $500 $56,360
Revised: January 21, 2012
10
Completing Your Application This completes the application for a general academic program. If the Department responds to an application with a request for more information, action on the application stops; the review will continue only after the requested information is received. Complete applications submitted in the interim may take priority. Proposals for programs that prepare certified teachers, certified educational leaders, or licensed professionals may require supplemental information; for guidance, visit the Web sites indicated below or contact the appropriate Department office. General academic, teacher preparation, and educational leadership preparation programs: New York State Education Department Office of Higher Education Office of College and University Evaluation 89 Washington Avenue Albany, NY 12234 (518) 474-2593 Fax: (518) 486-2779 [email protected] www.highered.nysed.gov/ocue/ Programs that prepare licensed professionals: New York State Education Department Office of the Professions Professional Education Program Review 89 Washington Avenue Albany, NY 12234 (518) 474-3817, extension 360 Fax: (518) 473-0114 [email protected] www.op.nysed.gov
Under certain circumstances, proposed programs may require amendment of the institution’s master plan and/or charter or certificate of incorporation, in addition to program registration. Master Plan Amendments Approval of a master plan amendment is required when the institution seeks initial authorization to award a degree; offers its first program at a new level of study; establishes a branch campus or inter-institutional program; or establishes at each degree level its first program in each of the 10 general disciplinary areas. Charter Amendments and Similar Authorizations The Board of Regents incorporates independent, not-for-profit colleges and universities by issuing a charter, which defines the institution’s legal authority and the location and scope of its programs of study and the degrees it may award. Charter amendments may be needed for such actions as initial authority to award degrees; new degree titles, including degrees at new levels; change of location or establishment of a branch campus; and operation beyond the specified limitations in the existing charter. A proposal for registration from a proprietary college may require amendment of the college’s certificate of incorporation on file with the Department of State. Such amendments require the consent of the Commissioner of Education. More information about charter amendments and similar authorizations is available online.
June 2009