Pre-fabricated elements for constructing sports stadiumsThe Wolfman Company manufactures pre-fabricated elements for constructing grandstands for stadiums as well as stairways. The elements are manufactured at a high quality according to the architect’s plans. The company has special seating solutions with impressive design presence.

Shlomo Lahat promenade, architectural concrete elements, Frishman Gordon, Tel Aviv. Design: Meizlitz Kasif Architects. Architect in charge: Maor Roytman.

Grandstands made of KEYSTONE blocks. Reyim base – Gaza area. Design: Wolfman Industries for the Ministry of Defense.

Prefabricated grandstands. Municipal stadium, Kiryat Shmone.

Grandstones made of KEYSTONE blocks – City of training bases. Design: Yaron -Ari, landscape architecture.

2

1Construction

Constru

ction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Description Internal dimensions (meters) (length x width) Height (meter) Net floor area (m2) Weight (ton)

Structure 4.40 2.10X2.10 2.50 4.40 14.1

Structure 6.30 3.00X2.10 2.50 6.30 17.7

Toilet unit structure

Control rooms for Israel Railways

Multi-Purpose Rooms

Notes: • The rooms are also available in sizes and finishes different

from those appearing in the table.

• Exterior stone cladding is available by request.

• Openings, windows, slats, and door will be adapted to the requirements of the customer.

• Watertight roof and peripheral inverted channel for improvement of the appearance and for drainage to rear drainpipe.

• Standard finish: Interior finish – acrylic paint, exterior finish – acrylic plaster. Floor paved with ceramic tiles. Preparation for electricity cables.

• The Wolfman Industries Company will supply detailed plans and a final specification for approval of the customer.

Toilet unit structure

Kitchen unit structure

3

1Construction

Cons

truct

ion

Description

Protective Bell for private areas

Weight including a shrapnel blast door: 10 tonsType of concrete: B-50.Net inner area: 3.5 sq. meters.Opening (door) dimensions:200 X 80 cm.Thickness: 20 cm.

Protective Bell for public areas

The bell includes entranceway and a light door.Type of concrete: B-50.Net inner area: 3.5 sq. meters.Entranceway dimensions: 90 X 210 cm.

Institution Protective Area (IPA)

Authorized by the Home Front Command in accordance with all guidelines.Net inner area: 10 sq. metersSupplied with all the required systems and finishing fittings.Specifications and plans will be supplied by Wolfman Industriesby request.

Portable protection unit model 29

Protected area: 4.07 m2Sloped entrance for maximum accessibility.Ceiling of 40-cm thick. B-50 concrete.

90

210

R105

365

277

255

198

200

C-C ( 1 : 25 )

D-D ( 1 : 25 )

E ( 1:5 )

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

ZA-260x360.ts-1State Changes Date Name

Drawn

Checked

Standard

Date Name30/07/2008 Alex Zorin

C

C

DD

E

ולפמן תעשיות בע"מ

א מבט

על מבט

נגישות עם ממוגנת הסעה תחנה360x260לנכים

הערותב-50 בטון 1. סוג

דרישות פי על מיוצר יהיה 2. המבנה4 ת.י. 446 חלק

דרישות פי על יהיה בודדים במוטות 3. הזיון3 ת.י. 4466 חלק

לדרישות התאמה עם צבוע חוץ- בטון 4. גמר הלקוח

לצביעה המתאים גלוי פנים - בטון 5. גמרתקניות ביטומניות יריעות ע"י הגג 6. איטום

בטון 10.726 מ"ק 7. כמותהמבנה 26.816 טון 8. משקל

קטומות 2X2 ס"מ יהיו פינות 9. כלברזל 1180 ק"ג 10. כמות

360.0

260.

0

15.0

15.0

40.0

300.

015

.020

5.0

8.0

70.0

20.0 20.0 25.0

20.0360.0

20.0

20.0

90.0

220.

0

185.0 90.0

80.0

230.

0

2.0

2.0

n3" ניקוז צינור

115.0

20.0

PVC

מרוג מפח משופעת כניסהבעובי 6 מ"מ

הרמה פיןDEHA 6000-10-0340

1% שיפוע

200.0

35.0

Alex Rud

C-C ( 1 : 25 )

D-D ( 1 : 25 )

E ( 1:5 )

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

1 A2

ZA-260x360.ts-1State Changes Date Name

Drawn

Checked

Standard

Date Name30/07/2008 Alex Zorin

C

C

DD

E

ולפמן תעשיות בע"מ

א מבט

על מבט

נגישות עם ממוגנת הסעה תחנה360x260לנכים

הערותב-50 בטון 1. סוג

דרישות פי על מיוצר יהיה 2. המבנה4 ת.י. 446 חלק

דרישות פי על יהיה בודדים במוטות 3. הזיון3 ת.י. 4466 חלק

לדרישות התאמה עם צבוע חוץ- בטון 4. גמר הלקוח

לצביעה המתאים גלוי פנים - בטון 5. גמרתקניות ביטומניות יריעות ע"י הגג 6. איטום

בטון 10.726 מ"ק 7. כמותהמבנה 26.816 טון 8. משקל

קטומות 2X2 ס"מ יהיו פינות 9. כלברזל 1180 ק"ג 10. כמות

360.0

260.

0

15.0

15.0

40.0

300.

015

.020

5.0

8.0

70.0

20.0 20.0 25.0

20.0360.0

20.0

20.0

90.0

220.

0

185.0 90.0

80.0

230.

0

2.0

2.0

n3" ניקוז צינור

115.0

20.0

PVC

מרוג מפח משופעת כניסהבעובי 6 מ"מ

הרמה פיןDEHA 6000-10-0340

1% שיפוע

200.0

35.0

Alex Rud

90

210

R105

365

277

255

198

200

Protection SolutionsWolfman Industries Ltd supplies a variety of protection solutions, beginning with the manufacture and supply of mobile pre-fabricated Institution Protective Areas authorized by the Home Front Command through to secure rooms and a variety of shelters.

חלון הדף מוסדי + חלון אלומיניום פנימי נגד גזים

ע“פ תקן פיקוד העורףדלת הדף רסיסים למוסדות בריאות

ע“פ תקן פיקוד העורף

4

1Construction

Constru

ction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Institutional blast double-wingedwindow, 24 mm metal hinges +

internal aluminum anti-gas windowaccording to Home Front Standard

Filtering and ventilation system

APPROvEd bY ThE

hOME FRONT cOMMANd

IPA – PlAN

Blast door for health institutions according to the Home Front Command

Sloped entrance made of checkered plate of

6-mm thick

Description

“ShOKET” Protective Wall

Dimensions 3 X 3 meters,Net thickness: 20 cm.Used for constructing protected areas and protection of openings or shelters.“Corduroy” texture on one side andsmooth on the other side. The wallis available with a base suitable forcreating a corner

Combination of a “ShOKET” wall with a MAgNObOx culvert

The system is composed of a water box culvert with interior dimensions of 2.25 X 1.75 m and “ShOKET” type walls suitable for up to 10 people.A number of box elements can be joined together to create a larger area.

* Also see trough walls in chapter 6

Modular Protective System

Can be assembled from a number of boxes together with a special entranceway.Advantages from the cost-effective point of view when used:• Standard elements readily available in

inventory.• Varying sizes of large protection systems.• Supplied according to the customer’s

requirements.

650

900

26.25

20

700

225

175

300

25020

700

280

Protection Solutions

5

1Construction

Cons

truct

ion

Protected area 26.25 m2Entrance

Entrance

Rectangular culvert with internal dimensions of 225x175mmThickness of walls floor and ceiling 26-mm

Prefabricated wall including a base with dimensions of 300x300mmCorduroy texture on the outside

600

1700

500535

240

350

W

H

S

L

L

2500

1700

180

1500

All the dimensions, S, L, H, W shall be planned in terms of engineering according to the nature of application

Pre-fabricated wall for fencing and support “EggEd” model

• Rapid and controlled implementation of the wall without a need for work or accessing the neighbor’s side.

• High cost/benefit ratio when constructing support walls up to 2.5 m in height.

• High cost/benefit ratio when constructing various channels in varying widths and at a height of up to 2.5 m.

• Planning and construction on site of supplementary reinforcement and casting a “leg” in a manner suited to every situation and application.

• It is possible to construct a texture on the outer side – imitation stone and so on.

• Channels of varying height and width can be constructed.

For further details and engineering advice – please contact the Marketing Department.

Pre-fabricated base

The position prior to casting a bottom to

the channel

Positioning of the wall prior to completion of reinforcement and casting the leg.

Wall after casting the leg.

6

1Construction

Constru

ction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Recessed lifting anchor/boltRecessed lifting anchor/bolt

Pass through holes for temporary supports

Prices by agreement

No. Model Maximum height H in cm

Net length l in cm

Uniform thickness T

in cm

Variable wall thickness Base width W in cm

Weight in kg for maximum dimensions Up T1 Down T2

Mobile protective wall, height 2.2-m 220 100 20 - - 110 1765

“ShOKET” wall 300 300 20 - - 120 6350

Protective / fencing wallTongue and groove joint Up to 600 150 20/25/30 - - 160 8120

Protective / fencing wallTongue and groove jointStraight base

Up to 940 Up to280 - 40 30210/350

According to height

31000

Fencing wall tongue andgroove joint + grouted. Smooth finish

Up to 130 200 18 - - 70 1600

Protective / fencing walltongue and groove joint 360 300 - 35 25 120 10000

Special protective wall tongue and groove joint, smooth finish

300 300 40 - - 200 11950

Pre-fabricated base

Fences and WallsWolfman Industries offers a variety of solutions for walls and fences made of pre-fabricated concrete.

7

1Construction

Cons

truct

ion

Option: corduroy texture

“ShOKET” wall – transport station protectionDivider wall – Wholesale market, Tzrifin

Fences and walls Wolfman Industries has variable solutions for prefabricated fences and walls.

Wall around the Bahai Gardens – Akko.Architecture: The Bahai Community.Field contractor: Pituach Acher Ltd

Security wall – Ashdod Port

8

1Construction

Constru

ction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

The Wolfman Company manufactures beams, columns and columns for pipe supports for various purposes as required.

concrete beams and columns

Prices by agreement

Prices by agreement

columns for Signs on bridges

9

1Construction

Cons

truct

ion

Column for a signon a bridge with a

modular ladder and aprotective enclosure

As

requ

ired

Column for a sign on a bridge Functional

dimensions

Lifting lugs

Ø 2”sleeve (X4)

Upper plate with4 screw rods

Sleeve for grounting

Sleeve for control

Element type Description length (m) Width (m) Height (m) Weight (kg)

MaCkpela model 145 Field burial MaCkpela 1.45 high 2.30 2.30 1.45 3,370

Single element for model 145

Single element for field burial model 145 2.40 2.40 0.70-0.75 1,890

MaCkpela model 160 MaCkpela for field burial of 1.45 high 2.340 2.40 1.60 3,500

Single element for model 160

Single element for field burial model 160 2.40 2.40 0.80 2,000

MaCkpela model 190 MaCkpela for field burial of 1.90 high 2.40 2.40 1.90 4,030

Ramon burial chamber (SaNhadriN structure)

Chamber for burial structure in layers (floors) 2.41 2.41 0.75 1,340

Lid plate for burial element

Reinforced concrete lid plateA single element requires a total of 16 units

A MaCkpela requires 32 units 0.68 0.125 0.05

10.6Weight of one

element

burial elementsWolfman Industries Ltd. Is approved by the Hevra Kadisha to fabricate field burial elements, KOKhS and MAcKPElAS (the SANhAdRiN structure method). This burial method confirms all of the Halacha rules.

10

1Construction

Constru

ction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Pre-Fabricated Elements for solving the Problem of impurity for cohanim

This system of pre-fabricated elements facilitates the passage of Cohanim above graves by creating a “separation tent” between the graves and the passageway – road, structure and so on. The system was developed according to Halacha (Jewish religious laws) requirements and has been implemented, inter alia, on the railway line from Naan to Beersheba.

Space for outlet of the impurityThe solution is enabled by creating a space at every vertical point above the graves by means of special pre-fabricated elements. This space creates a “place for the outlet of the impurity” and is conveyed by a special pipe for outlet of the impurity.

halachic supervisionIt is important to state that the use of the pre-fabricated elements to solve the problem of impurity for Cohanim is totally under the supervision and guidance of the competent Halachic authorities – “Atra Kadisha”.

planning the systemIn order to achieve a system that complies with the requirements of the Halacha, clear guidelines must be provided for the following subjects: Implementation of a straight and smoothed concrete surface, determination of the course, completion and casting of walls, pipes for outlet of the impurity and so on.Planning of the system is undertaken under close engineering supervision to create a safe system designed to withstand the relevant engineering loads for each project. Sequence of elements for constructing a passageway

Construction of a system of pre-fabricated elements for creating a “separation tent”

Pipe for outlet of impurity under the passageway lided with gravel.

11

1Construction

Cons

truct

ion

Bottom element

Width 130-cm

Top element

width 170-cm

Casting completionCasting completion

Galvanized 8" pipe