Constructing Envs Journal2
description
Transcript of Constructing Envs Journal2
Constructing Envs.
Tutorial 2
In this tutorial, we need to use the balsa batten to
build a tower as tall as possible; however, it must
be stable as well.
Before the tutorial, we use a large steel ruler and a sharp cutting knife to cut the balsa
wood into strips. We planed to build a triangle
basement.
We wanted to build the tallest wood tower in the
tutorial. This is our conception, as shown in the photo
on the left. In our opinion, triangle is a stable shape.
Thus, we plan to use triangle to design this model
mainly.
These two wood strips were used act as
stabalisers to make the tower more stable.
Constructing Envs.
Tutorial 2
What we've done here is not as close as what we expected. In the actual condition, our
final work even made us disappoint. Although the ‘tower’ was the tallest one in the tutorial,
however it can’t stand by itself.
In my opinion, under ideal situations, our tower should've been able to stand. However,
the technical details of the tower were not well constructed which in turn resulted in our
failed standing tower.