Construct 2 Blend mode
-
Upload
-wu-shyishiou -
Category
Education
-
view
557 -
download
4
description
Transcript of Construct 2 Blend mode
Dept. of Electronics Engineering
Construct 2 Blend mode電子工程系電腦遊戲設計組
吳錫修
2014.2.19
Blend效果
當圖片物件有重疊時,上層圖片物件的Effects/Blend mode屬性決定上層圖片 (稱為source image) 與底層圖片 (稱為destination image) 的合成效果
Wu, ShyiShiou2
source image(設定Blend mode)
destination image
Blend mode設定值 1/11
Normal (source image覆蓋destination image上面)
Default. Displays the source image over the destination image
Wu, ShyiShiou3
Blend mode設定值 2/11
Additive (將重疊部份混色)
Displays the source image + the destination image
Wu, ShyiShiou4
Blend mode設定值 3/11
XOR (將重疊部份剔除)
Only the difference part of the source image and the destination image is shown (必須禁用WebGL)
Wu, ShyiShiou5
Blend mode設定值 4/11
Copy (只顯示source image)
Displays the source image. The destination image is ignored
Wu, ShyiShiou6
Blend mode設定值 5/11
Destination over (將destination image疊在source image上)
Displays the destination image over the source image
Wu, ShyiShiou7
Blend mode設定值 6/11
Source in (只顯示在source image中與destination image重疊部份)
Only the part of the source image that is INSIDE the destination image is shown, and the destination image is transparent
Wu, ShyiShiou8
Blend mode設定值 7/11
Destination in (只顯示在destination image中與source image重疊部份)
Only the part of the destination image that is INSIDE the source image is shown, and the source image is transparent
Wu, ShyiShiou9
Blend mode設定值 8/11
Source out (只顯示在source image中與destination image不重疊部份)
Only the part of the source image that is OUTSIDE the destination image is shown, and the destination image is transparent
Wu, ShyiShiou10
Blend mode設定值 9/11
Destination out (只顯示在destination image中與source image不重疊部份)
Only the part of the destination image that is OUTSIDE the source image is shown, and the source image is transparent
Wu, ShyiShiou11
Blend mode設定值 10/11
Source atop (顯示destination image,以及source image在destination image中的部份)
Displays the source image on top of the destination image. The part of the source image that is outside the destination image is not shown
Wu, ShyiShiou12
Blend mode設定值 11/11
Destination atop (顯示source image,以及destination image在source image中的部份)
Displays the destination image on top of the source image. The part of the destination image that is outside the source image is not shown
Wu, ShyiShiou13