Consider Concrete Scanning Services

There are two main reasons why companies and individuals typically use concrete scanning services. In some cases, maps have not been kept updated or have just gotten lost, so nobody really knows where pipes and wires run under the surface of roads, grounds, and buildings.

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection


In any case, these services are very effective. It is almost like being able to call on Superman to use his X-Ray vision to see exactly what lies under the ground. The use of this modern technology can help save money and time, and it might even prevent property damage and injuries.




What is Concrete Scanning? Today's technology includes three basic things:

Radar that penetrates the ground X-ray cameras that can see what is

inside of pipes and other fixtures Cameras that can travel through

pipes and bring back live remote pictures




Concrete scanning is also called sub-surface investigation. It utilizes cameras that can actually travel underground through pipes and other utility fixtures. These cameras can detect problems like broken pipes, cracks, or backups.




Additionally, the cameras can be used to report on pipes in satisfactory condition. This way, nobody needs to go to the trouble and expense of digging into the ground when it actually is not needed.




Why Use GPR Technology?

The biggest reason to use this technology is that it is not invasive. It is the same as having a doctor suggest getting an X-RAY or similar test before he suggests operating. It is possible to see what is going on under the ground without actually digging up anything.




These are some of the benefits of scanning technology:

This technology prevents damage to fixtures that may be in good condition and do not need any work done.

This technology saves money because no work crews are needed to dig around pipes and electronic fixtures just to check up on them.




This means that property damage, injuries, and expenses are minimized. Only work that actually needs to get done will get done because you and your crews have a way to see underground.




Even if you know that you have an underground problem, you may not know the best way to access the problem. If you use GPR, your crews will know the most efficient way to get to the source of the problem without damaging structures or fixtures around a broken pipe or damaged wire.




Also, knowing the exact source of the problem can help your engineers figure out the safest and most efficient way to fix it before you ever need to start boring into the earth. It can save you money and reduce the chance of making mistakes that you will end up paying to fix later.More info on:




Why Not Scan First and Dig Second?It only makes sense to plan out any work you need to do. That way, you can be sure of having the right crews, machines, and supplies for your job. Contact a company that can supply underground scanning services to see what they can do for you before you need to start digging!




Consider Concrete Scanning Services

Marketing

Transcript of Consider Concrete Scanning Services