Connectors & Clamps MACLEANRIV Suppressor Spring – Stainless Steel Features Tangent or angle...

MACLEAN POWER SYSTEMS

February 2004 Page 34 of 58

USA - Tel: 847-455-0014 Fax: 847-451-0029 Canada - Tel: 450-698-0520 Fax: 450-692-5670 www.macleanpower.com Product specifications are subject to continuous improvement and may be changed at any time without notification.

Connectors & Clamps Suspension Clamps – Trunnion

For Deadending Conductor with Straight Line Clamps on Line Post Insulators

AD-V1 adapters are designed for use with both vertical and horizontal type (clamp top) line post insulators. The adapters are used with Bethea ASD, HSD, and DEF series straight dead end clamps as well as with dead ends manufactured by others. A356-T6 Aluminum alloy.

AD-V1 adapters are designed for use with both vertical and horizontal type (clamp top) line post insulators. Use of AD-V2 adapters permits deadending in both directions, from a single insulator. These adapters are used with Bethea ASD, HSD, and DEF series straight dead end clamps as well as with dead ends manufactured by others. A356-T6 Aluminum alloy.

AD-P adapters are designed primarily for use with vertical type (clamp top) line post insulators, installed in either the vertical or horizontal position. These adapters are used with Bethea ASD, HSD, and DEF series deadend clamps. They are also for use with Bethea type ALS and RALS series angle suspension clamps as well as equivalent clamps manufactured by others. A356-T6 aluminum alloy.

Catalog Dimensions Weight Number A B C D E F Lbs/100 AD-V1 3 7/8 3 3/8 1 3/4 35/64 21/32 5/8 38 AD-V2 3 7/8 4 3/4 1 5/8 35/64 21/32 5/8 57 AD-P 3 7/8 3 3/8 1 3/4 35/64 21/32 5/8 38





Material

Body and Keeper – Aluminum Alloy A356-T6

Hardware – Steel, Hot Dip Galvanized

Spring – Stainless Steel Features Recommended torque values = 40-45 ft/lbs

Catalog Figure Conductor Range Dimension Weight Number Number Inches ACSR Alum. A Lbs/100

ACTS-057 1 .23-.57 4 – 4/0 4 – 4/0 5 1/4 82 ACTS-084 1 .35-.84 1 – 477 1/0 – 477 5 1/4 95 ACTS-118 1 .50-1.18 3/0 – 795 4/0 – 1033.5 5 1/4 117 ACTS-150 1 .93-1.50 556.5 – 1510.5 715.5 - 1590 5 1/4 127 ACTS-200 1 1.50-2.00 605 – 1113 * 795 – 1192.5 6 1/2 225 ACTS-230 2 1.90-2.30 1033.5 – 1431 * 1192.5 – 1510.5 * 8 3/4 242

Notes: 1) For spring in one trunnion, add suffix “-SL1” 2) For spring in both trunnions, add suffix “-SL2” 3) For stainless steel hardware, add suffix “-SS” 4) * = over formed armor rods


February 2004 6 of 58



Catalog Number: ACTS-270

Material




Notes: 1) For spring in one trunnion, add suffix “-SL1” 2) For spring in both trunnions, add suffix “-SL2” 3) For stainless steel hardware, add suffix “-SS”





Material

Body and Keeper – Ductile Iron, Hot Dip Galvanized or High Strength Bronze



Clamps are supplied with spring in one trunnion LPS Series FCTS Series

Catalog Material Conductor Range Dimension Number inches A LPS-57-F Ductile Iron .25 - .57 5 1/8 LPS-57-B Bronze .25 - .57 5 1/8 LPS-86-F Ductile Iron .35 - .86 5 1/4 LPS-86-B Bronze .35 - .86 5 1/4 LPS-118-F Ductile Iron .50 – 1.18 5 1/2 FCTS-150 Ductile Iron .93 – 1.50 5 1/4

Notes: 1) LPS series supplied with spring in one trunnion. For FCTS series, add suffix “-

SL1” for single spring 2) For spring in both trunnions, add suffix “-SL2” 3) For stainless steel hardware, add suffix “-SS”





Material




Catalog Conductor Range Dimension Weight Number Inches ACSR Alum. A Lbs/100 ACP-057 .23-.57 4 – 4/0 4 – 4/0 5 1/4 82 ACP-084 .35-.84 1 – 477 1/0 – 477 5 1/4 95 ACP-118 .50-1.18 3/0 – 795 4/0 – 1033.5 5 1/4 117 ACP-150 .93-1.50 556.5 – 1510.5 715.5 - 1590 5 1/4 127 ACP-165 1.00-1.65 636 – 1780 795 – 2000 5 3/4 133 ACP-200 1.50-2.00 605 – 1113 * 795 – 1192.5 6 1/2 225

Notes: 1) For spring in one trunnion, add suffix “-SL1” --- ACP series only. 2) For spring in both trunnions, add suffix “-SL2” --- ACP series only. 3) * = over armor rods 4) ** = 15 degree for ACP-165 5) *** = 30 degree for ACP-165

Material

Body and Keeper – Ductile Iron, Hot Dip Galvanized


Spring – Stainless Steel Features Recommended torque values = 40-45 ft/lbs Clamps supplied with spring in one trunnion

Catalog Conductor Range Dimension Number Inches A

PAC-57-F .25 - .57 5 1/4 PAC-200-F 1.50 – 2.00 6





Material



RIV Suppressor Spring – Stainless Steel Features

Tangent or angle clamps for line angles of 0-45 degrees. Reversible in trunnion for internal or external angles.

Recommended torque values = 40-45 ft/lbs

RIV suppressor spring installed in one trunnion

Catalog Dimension Conductor Range Number A Min Max

ULPS2-75 5 .25 .75 ULPS2-118 5 1/2 .68 1.18 ULPS2-140 6 .68 1.40





Material



RIV Suppressor Spring – Stainless Steel Features These clamps have a longer support radius for greater protection to the conductor.

Captive hardware simplifies “hot-line” maintenance.

Recommended for line angles up to 22 ½ degrees.

Recommended torque values = 40-45 ft/lbs

RIV suppressor spring installed in one trunnion

Catalog Figure Dimension Conductor Range Number Number A Min Max

ULPS3-125-SCE 1 5 1/4 .62 1.25 ULPS3-125 2 5 .62 1.25 ULPS3-140 2 5 .88 1.40

Notes: 1) For stainless steel hardware, add suffix “-SS”

Connectors & Clamps MACLEANRIV Suppressor Spring – Stainless Steel Features Tangent or angle...

Documents

Transcript of Connectors & Clamps MACLEANRIV Suppressor Spring – Stainless Steel Features Tangent or angle...