Connecting the DataNet receiver (DNR900) to a PC via a local area network (LAN)
4
Office Connecting the DataNet receiver Connecting the DataNet receiver (DNR900) to a PC via a (DNR900) to a PC via a local area network (LAN) local area network (LAN) In cases where a local area network is present there is a way to utilize the network infrastructure to connect the DataNet system to the network. This is a handy option to bridge a distance or to overcome RF data transmission issues in difficult locations. USB cable LAN cable Office
-
Upload
upton-suarez -
Category
Documents
-
view
11 -
download
0
description
Connecting the DataNet receiver (DNR900) to a PC via a local area network (LAN). - PowerPoint PPT Presentation
Transcript of Connecting the DataNet receiver (DNR900) to a PC via a local area network (LAN)
Office
Connecting the DataNet receiver (DNR900) to a Connecting the DataNet receiver (DNR900) to a PC via a PC via a
local area network (LAN)local area network (LAN)In cases where a local area network is present there is a way to utilize the network infrastructure to connect the DataNet system to the network. This is a handy option to bridge a distance or to overcome RF data transmission issues in difficult locations.
USB cable
LAN cable
Office
Hardware: USB to network serverHardware: USB to network serverModel name: NetBoModel number: NH-204
(B) Connect the network cable here
(A) Connect the DataNet USB cable here
Instructions:1)Install the server’s software (CD enclosed)2)Connect the DNR900 receiver USB cable to USB input #1 (A) on the NetBo3)Connect the network’s RJ45 cable to back socket (B) 4)Connect the AC/DC power adaptor to power the NetBo (red LED = active)
Software: connecting to the device Software: connecting to the device • Load the USBServer’s software from the enclosed CD.• Make sure the NetBo USB-LAN server device is connected to the local network and the
DataNet receiver is powered, switched “ON” and the DataNet receiver USB cable is connected to the receiver and the NetBo device.
• Click on the USBServer’s icon (A) to open the device server.• Click “Search” (B) the DataNet’s USB driver will identified on the network as “Silicon Labs
CP2102 USB to UART bridge cont” with green icon (C) • Next click on “Connect” (D), when connected the green icon colour changes to orange (E)
and the “connect” button is now “Disconnect” (F)• Return to the DataNet software and click on “network>Detect Receiver” the receiver’s icon
should be green and active. Your DataNet receiver is now connected via your local network.
A
B
C
D
E
F
Linking the DataNet system to your local area Linking the DataNet system to your local area network network
RCUSB cable connects the receiver to NetBo ,a USB over Local Area Network (LAN) device.
The red line illustrates the LAN cable connecting on one side the NetBo and the remote office PC.
Office
