ConnectWorksConnected Lighting pilot program

Connect Ahead pilot program Select ConnectWorks equipment and LED fixtures

Enter a Connect Ahead order with promo code provided

Install and experience the benefits of connected lighting

1

2

3

TRY itBEFORE

you buy it program

Take control of your outdoor lightingAn affordable way to enable full-system control:• Connected technology lets you program, monitor and control your entire network• Wireless controls for centralized, comprehensive management• System data and analytics help you optimize savings and public safety• The most comprehensive selection of energy-saving outdoor LED lights, to meet a wide range of applications

Wireless technology Program, monitor and control your outdoor lights remotely with leading edge RF/GSM technology.

Google Maps and Google Earth user-interface ConnectWorks is fully integrated with Google Maps, so you can monitor your system using an interface you're already familiar with.

Remote control programmingIndividual lights or zone groups can be controlled and dimmed based on sunset/sunrise time, photocell feedback, your own custom schedule, or on-demand.

Health monitoringThe system allows for comprehensive asset-management - alerts let you know as soon as something goes wrong. Self-diagnosis allows for one-trip repairs.

+ + + =

Uncomplicated. Powerful. Affordable.

Wireless gateway

Communicates with cloud-based

system

Software services

Full status and control from Google Maps

Lighting fixture

Highly efficient LED fixtures

Wireless lighting

controllerIntelligent, wireless lighting controller

up to

30%SAVINGS on lighting

energy costs

In addition to LED energy savings

Experience the benefits of Connected Lighting without the riskContact your local lighting representative for more details on this unique pilot program

Connect Ahead pilot program TRY it...before you buy it!Test the performance of Eaton’s Streetworks LED products and ConnectWorks Connected Lighting System powered by CIMCON before you pay for them with this 180-day pilot program.

Simple steps to Get Connected Choose LED fixtures, equipment and servicesChoose up to twelve approved fixtures, up to twelve wireless lighting controllers, one wireless gateway and startup services. If you would like to install Streetworks fixtures for this program, specify dimming and 7-PIN photocontrol receptacle on up to 12 fixtures from the following product families, up to $5,000. For full catalog logic, refer to product spec sheets. For 347V or 480V applications, contact your lighting representative for more details. If you want to retrofit previously installed LED fixtures with ANSI C136.41 compliant 5-PIN or 7-PIN photocontrol receptacles, no additional fixtures are required.

Streetworks LED fixturesRoadway• Archeon (ARCH)• Verdeon (VERD)• Verdeon-M (VERD-M)• Navion (NVN)• OVH/OVF

ConnectWorks systemThe ConnectWorks system combines the use of a wireless gateway, wireless lighting controllers and software services to provide a connected lighting system.

Wireless Gateway • One per demonstration program• Catalog: WG-U-VZ

ServicesStartup services include: remote configuration of the nodes and cloud-hosted software, activation of cellular service for the gateway and a 60-minute user training on system functionality.

Startup and Training

• Catalog: FACTORY STARTUP-CW (one per demonstration program)

Enter order with promo code Enter order with selections made from above with your local lighting representative.

Order must be marked “Connect Ahead” with promo code “CA6”.

Install and experience the benefitsInstall the fixtures and ConnectWorks system.

Contact the Lighting Services team at LCServices@eaton.com with the subject "Connect Ahead Configuration" to schedule a remote training session and remote configuration for controller and gateway.

Eaton will allow up to 180-days net payment terms from invoice date, or you can return the fixtures, controllers and gateways (freight prepaid) within 180-days for a credit to the invoice.

1

2

Wireless Lighting Controller• Up to 12 (one per LED fixture)• Catalog:

iSLC-3100-7P-U-A-G-IO-CATB-2

Software as a Service • One per wireless lighting controller• Catalog: SAAS-0001

3

Area• Galleon (GAN / GAP)• USSL• Caretaker (CRTK)

Eaton is a registered trademark.

All other trademarks are property of their respective owners.

Product availability, specifications, and compliances are subject to change without notice.

Canada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172

Eaton 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lightingFor service or technical assistance:1-800-553-3879

© 2017 EatonAll Rights ReservedPrinted in USAPublication No. BR512003EN June 2017

1. Eaton agrees to sell products and services to Buyer for purposes of mock-up and review. Buyer shall not use the products and services for any purpose other than evaluation for continued use and/or purchase of Eaton products.

2. Buyer must issue a released purchase order in an amount as quoted by Eaton. Purchase order must note “Connect Ahead” and specify promo code “CA6”. Purchase order is subject to all standard Eaton terms and conditions.

3. Connect Ahead orders purchased by your agency should be entered into FLASHPro using your agency’s LED account in the sold-to field.

4. Standard made to order or stock shipping lead times apply to all products.

5. Connect Ahead orders being billed to the distributor should be entered into FLASHPro by the agent and submitted as normal. Please contact your customer service representative for follow up.

6. Services provided through the Connect Ahead program do not include on-site training, troubleshooting, or labor to install or uninstall pilot program products. Additional services are available at standard billed rates.

7. Eaton will allow up to 180-days net payment terms from invoice date, or you can return the all fixtures, controllers and gateways (freight prepaid) undamaged within 180-days for a credit to the invoice.

8. Buyer must request an RMA number for product, noting “Connect Ahead” in the RMA request. Returned product must reference this RMA number. Credit will not be issued for product returned without an RMA number.

9. To receive a credit, all products shall be returned freight prepaid in the original packaging and in reusable condition. Buyer shall provide the freight tracking number to Eaton. Credit will not be issued for sample products damaged during return shipment.

10. Buyer will be responsible for continuation of cellular service and ongoing annual SAAS fees at the end of the 180-day pilot period.

11. Credit will not be issued for Sample Product returned to Eaton after the allotted one hundred and eighty (180) day pilot period.

12. Standard Eaton warranty terms and conditions apply during the 180-day pilot program.

Connect Ahead ordering reference*

Description Pilot Order Catalog Number Quantity Credit Applicable

LED fixtures As needed Refer to product spec sheets up to 12, or $5000

Yes, if returned within below stated terms

and conditions

Wireless Gateway Required WG-U-VZ 1

Wireless Lighting Controller Required iSLC-3100-7P-U-A-G-IO-CATB-2 up to 12, one per LED fixture

Software as a Service Required SAAS-0001 up to 12, one per controller

Training and Configuration Required FACTORY STARTUP-CW 1

*For pilots requiring larger quantities or other special requirements, please contact your Streetworks sales representative. Connect Ahead terms and conditions may no longer apply.

Terms and conditionsBy accepting any products or services offered through the Connect Ahead program, Buyer agrees to the following terms and conditions: