5)Below is the configuation for BSNL/MTNL Broadband customers:-

1.Go to any web browser like Google Chrome or Firefox ( or Internet Explorer :-P)Type "http://192.168.1.1" as the URL and enterIt will ask for password. Type password as follows:Username: adminPassword: admin

2.Go to Advanced Setup and Click AddNow Add VPI values as 0 and VCI as 35 for BSNL and 32 for MTNL.Select DSL Latency : Path 0Select DSL Link Type: EoAConnection mode: DefaultEncapsulation mdoe: LLC/SNAP - BRIDGINGService Category: UBR Without PCRSelect IP Qos Scheduler Algorithm to Strict Priority and then Save

3.Now go to WAN Service and the click AddIn WAN Service Interface Configuration, Just click NextNow in WAN Service Configuration, Select "PPP over Ethernet"In the next page , you have to set your service provider username and password. If you don't remeber the password, Look at your Broadband Bill issued by ISP. In case of BSNL, Username is printed at the top-right corner. It is of the form "yourname STD-CODE PHONENUMBER AREA". For password Contact your ISP. In case BSNL, they keep it as "password" only. Keep rest settings as default.

4.In Routing default gateway, Just click NextIn DNS Server Configuration, I recommend to use some Public DNS servers like OpenDNS or Google DNS. So Select "Use the following Static DNS IP Address" and Add Primary DNS Server: 208.67.222.222 and Add Secondary DNS Server: 208.67.220.220.

5.Now in WAN Setup: Summary, Just skip clicking NextDone. Now just reboot your router(Go to management then reboot)

6)The router earth icon LED will go green after doing the above rig.After that you can setup the router via set up a new connection wizard.Also for vista users you,may,have to manually enter the IPv4 values.For that you have toa)go to the network and sharing centre and the click on view status of your new connection.b)In the networking bar you will see a IPv4 ticked(already) option.Select it and then click properties;In that,in the general bar,click use the following DNS address and feed the preferred and alternate addresses(use same primary and secondary addresses of 5)4. above step).

After that restart PC,though it may not be needed.For Windows 7,8 you don't need to enter IPv4 manually.