configuracion de red de trupunch 5000

8/18/2019 configuracion de red de trupunch 5000

1/31

1

T R U M P F O S

Networking Manual:For IS professionals/Network

Administrators

TR 33.1

January 2005


2/31

TRUMPF Network Setup (TOS)

TR33.1 TOS January_05 2

About the Manual

This is the TRUMPF Operating System Setup Manual. In this

manual, you will learn the steps necessary to network the TRUMPF

machine to a customer network using screens/interface from theTRUMPF Operating System (TOS) instead of Windows NT desktop.

The TRUMPF Operating System allows the operator to call up

network setup functions and auxiliary programs without using the

Windows NT interface.

When the machine is turned on, TOS starts automatically and then it

runs in the background. Without further actions on the part of the

operator, the machine's User Interface will start after five seconds on

the control panel while TOS remains in the background. By pressingthe ALT + TAB keys, the TRUMPF Operating System (TOS) can be

brought to the foreground.

Goal

To allow the network administrator or IT professionals to use the

functions in the TRUMPF Operating System (TOS) to configure the

network.

Audience

The document presented here is designed for the I.S. professional.

This document is not a training manual for the casual user. Certain

knowledge must be acquired prior to reading this manual in order for

the information to be used successfully. It is highly recommended by

TRUMPF to enlist the aid of a Networking consultant before

continuing.


3/31



Copyright

© 2005, TRUMPF Inc. All rights reserved. The publication, or any

component part thereof, may not be reproduced or transmitted in

form or by any means, electronic or mechanical, including

photocopying, recording, storage in an information retrieval system,

or otherwise, with the prior written permission of TRUMPF Inc.

Disclaimer

THESE TRAINING MATERIALS ARE PROVIDED WITHOUT

ANY WARRANTY WHATSOEVER, INCLUDING ANY

DAMAGES TO PERSONS, EQUIPMENT, OR MACHINERY.


4/31



T a b l e o f C o n t e n t s

About the Manual................................................................................2 Goal ....................................................................................................2

Audience .............................................................................................2 Copyright ............................................................................................3 Disclaimer...........................................................................................3

Step 1: TOS......................................................................................5

Step 2: 3Com NIC Diagnostic or Intel Pro 100...............................7Step 3: Setting Up a Network ........................................................13

Step 4: Set Up TCP/IP Protocol.....................................................17

Step 5: New Users & Groups.........................................................27Step 6: Connect Network Drive.....................................................29


5/31

5

SStteepp 11:: TTOOSS


6/31

TRUMPF OS Network Setup


S t e p s ▪ Press the ALT + TAB keys simultaneously to bringTOS to the foreground.

▪ Press soft key and enter either the password “tcohope” (lower case) for older machines or

“fritzfranke” for new machines. This step willeliminate the need for entering a password each time a

soft key is pressed.

▪ Press soft key.

Note: Each time the machine is powered down, the password

will need to be re-entered.


7/31

7

SStteepp 22:: 33CCoomm NNIICC DDiiaaggnnoossttiicc oorr

IInntteell PPrroo 110000


8/31



Cable Types/Connection

Possibilities

▪ Twisted pair (S-UTP) (RJ45)▪ AUI for connecting to a thick LAN connection▪ Coaxial cable (Thin LAN) (BNC) (RG58)

▪ 10 Megabits per second (MBPS) ONLY

Note: The 3Com NIC Diagnostic is no longer available for

networking; TRUMPF now uses Intel Pro 100 as the current

network adapter.

Figure 1. 3COM 509 Combo Card

RJ45 AUI BNC


9/31



S t e p s ▪ Press soft key.


10/31



S t e p s ▪ From the Configuration tab

○ [I/O Base Address] set to “0x300.”

○ [Interrupt Request Level] set to “5.”

○ Select the [Transceiver Type] (cable type) to beused:

“On-board TP (RJ45)”

“Coax (BNC)”

“External (AUI)”

Do not select “Auto Select.”


11/31



S t e p s ▪ For the network adapter self test, select the registercard “Diagnostics.”

▪ Press the button “Run NIC test.”

Result: Completed successfully.


12/31



S t e p s ▪ Intel Pro 100 needs no configuration

○ Link light green verifies network wiring is ok

○ Activity light blinking yellow indicates data traffic

on network

○ Some software versions may not display this

window at all. Call Trumpf Control Systems for

help.


13/31

13

SStteepp 33:: SSeettttiinngg UUpp aa NNeettwwoorrk k


14/31



S t e p s ▪ Press soft key.


15/31



S t e p s ▪ Press button “Change.”


16/31



S t e p s ▪ You might have to enter the computer name and

Workgroup (Please do NOT log into the Domain).


17/31

17

SStteepp 44:: SSeett UUpp TTCCPP//IIPP PPrroottooccooll


18/31



S t e p s ▪ Press the “Add” button.


19/31



S t e p s ▪ Select the TCP/IP protocol and confirm with “OK.”


20/31


21/31



S t e p s ▪ Press “Continue.” The required drives will be installed.


22/31



S t e p s ▪ Highlight “TCP/IP Protocol,” then press the“Properties…” button. (Note: the “Bindings” tab may

need to be pressed first to activate the new protocol.)


23/31



S t e p s ▪ Intel Pro 100 users must select Intel® Pro/100 DesktopAdaptor, not Intel® 82559 Fast Ethernet Adaptor

(Lxx50)

▪ With DHCP -> Check the Obtain IP address from aDHCP server. You MUST have a DHCP server on

your network!

▪ Without DCHP ->Under “Specify an IP address,” enterthe required IP address and subnet mask.

▪

Press “Apply,” then “OK.”


24/31



S t e p s ▪ Answer the question “Do you want to restart yourcomputer now?” with “Yes.”

▪ After restarting, install Service Pack 6.

Caution: After each change in the network installation, theservice pack must be reinstalled.


25/31



S t e p s ▪ Press soft key from the System page.


26/31



S t e p s ▪ When Service Pack is complete, computer willautomatically shut down and reboot.


27/31

27

SStteepp 55:: NNeeww UUsseerrss && GGrroouuppss


28/31



S t e p s ▪ We no longer recommend you change the user login▪ Use the default login mmc, password mmc ▪ You should not run any logon scripts!!


29/31

29

SStteepp 66:: CCoonnnneecctt NNeettwwoorrk k DDrriivvee


30/31



S t e p s ▪ Press soft key ▪ Do not map H: drive it is reserved for Trumpf

upgrades.

▪ The mapping will be peer to peer

▪ Look at the next page for an example▪ You may have to create a local user account on you PC▪ Login – mmc, Password – mmc▪ There is a share on the machine you can transfer part

programs to as well. It’s called . Some

users map a drive on the PC instead.


31/31


configuracion de red de trupunch 5000

Documents

Transcript of configuracion de red de trupunch 5000