Conference Program - ocs.usu.ac.id · PDF fileConference Program September 7th 2017, ... 09.00...
Transcript of Conference Program - ocs.usu.ac.id · PDF fileConference Program September 7th 2017, ... 09.00...
Conference Program
and Venue
TALENTA
Conference on Engineering, Science and Technology “Sustainable Energy and Biomaterial”
Grand Aston City Hall
Jl. Balai Kota No.1 Kesawan, Medan, Sumatera Utara
Indonesia September 7
th, 2017
Conference Program
September 7th
2017, Grand Aston Hotel, Medan
07.30 – 08.30 WIB Parallel Session I Venue:
Rosewood 1, Rosewood
2, Sandalwood, Gaharu 1,
Gaharu 2
08.00 – 08.30 WIB Registration Venue:
Mahagony Grand
Ballroom 08.30 – 08.35 WIB National Anthem: Indonesia Raya
08.35 - 08.50 WIB Traditional Welcoming Dance
08.50 – 09.00 WIB Welcoming speech by Dr. Indra Surya
Chairperson of TALENTA CEST
09.00 – 09.10 WIB Welcoming speech and Opening Ceremony
by Prof. Runtung
Rector of Universitas Sumatera Utara
09.10 – 09.15 WIB Prayer
09.15 – 09.30 WIB Photograph session
09.30 – 10.00 WIB Keynote 1:
“Toward Green Society”
Prof. Hirommi Homma Toyohashi Institut of
Technology, Japan
Moderator: Dr. M. Sabri
10.00 – 10.30 WIB Keynote 2:
“Oil Palm Ash: From Waste to Wealth”
Prof. Hanafi Ismail
USM, Malaysia
Moderator: Dr. Halimatuddahliana
10.30 – 11.00 WIB Keynote 3:
“Energy Sustainability or Survivaility?”
Dr. Edward Halawa
Darwin University, Australia
Moderator: Dr. Taufik bin Nur
11.00 - 11.30 WIB Keynote 4:
“Processing of Palm Oil Mill Wastes Based
on Zero Waste Technology”
Dr. Eng. Irvan
Universitas Sumatera Utara, Indonesia
Moderator: Mr. BambangTrisakti
11.30 – 12.30 WIB Lunch
Venue:
Mahagony Grand
Ballroom
13.30 - 14.30 WIB Parallel Sessions II
Venue:
Rosewood 1, Rosewood
2, Sandalwood, Gaharu 1,
Gaharu 2 and Mahony
Grand Ballroom
14.30 – 15.30 WIB Parallel Sessions III
Venue:
Rosewood 1, Rosewood
2, Sandalwood, Gaharu 1,
Gaharu 2 and Mahony
Grand Ballroom
15.30 – 15.45 WIB Coffee break Venue:
Rosewood 1, Rosewood
2, Sandalwood, Gaharu 1,
Gaharu 2 and Mahony
Grand Ballroom
15.45 – 16.45 WIB Parallel Sessions IV
Venue:
Rosewood 1, Rosewood
2, Sandalwood, Gaharu 1,
Gaharu 2 and Mahony
Grand Ballroom
17.00 – 17.30 WIB Closing Ceremony by Seri Maulina, Ph.D,
Dean of Engineering Faculty
Venue:
Mahagony Grand
Ballroom
Session Schedules
Parallel Session I
Time: 07.30 – 08.30 WIB
Topic Venue Moderator
Chemical Engineering Rosewood 1 Dr. Fatimah
Industrial and Mechanical Engineering 1 Rosewood 2 Dr. Listiani Nurul Huda
Industrial and Mechanical Engineering 2 Sandalwood Dr. M. Sabri
Architecture, Civil and Environmental Engineering Gaharu 1 Dr. Medis S. Surbakti
Electrical Engineering, Science and Technology Gaharu 2 Mr. Soeharwinto
* Mahagony Grand Ballroom is on the first level of apartment area, the other rooms are on the second floor of the
hotel area. Please refer to the venue layout.
Parallel Session II
Time: 13.30 – 14.30 WIB
Topic Venue Moderator
Chemical Engineering 1 Mahagony Dr. Rondang Tambun
Chemical Engineering 2 Rosewood 1 Dr. Bode Hariyanto
Industrial and Mechanical Engineering 1 Rosewood 2 Dr. Meilita Tryana
Industrial and Mechanical Engineering 2 Sandalwood Dr. Juliza Hidayati
Architecture, Civil and Environmental Engineering Gaharu 1 Dr. Benny OY M.
Electrical Engineering, Science and Technology Gaharu 2 Mr. Tigor Hamonangan
Parallel Session III
Time: 14.30 - 15.30 WIB
Topic Venue Moderator
Chemical Engineering 1 Mahagony Dr. Rondang Tambun
Chemical Engineering 2 Rosewood 1 Mr. Bambang Trisakti
Industrial and Mechanical Engineering 1 Rosewood 2 Dr. Ahmad Delianur
Industrial and Mechanical Engineering 2 Sandalwood Dr. Listiani Nurul Huda
Architecture, Civil and Environmental Engineering Gaharu 1 Dr. Dwira Aulia.
Electrical Engineering, Science and Technology Gaharu 2 Dr. Ali Hanafiah
Parallel Session IV
Time: 15.45 - 16.45 WIB
Topic Venue Moderator
Chemical Engineering 1 Mahagony Dr. Hilma Tamiami
Chemical Engineering 2 Rosewood 1 Mr. Okta Bani
Industrial and Mechanical Engineering 1 Rosewood 2 Mr. Ikhsan Siregar
Industrial and Mechanical Engineering 2 Sandalwood Mr. Tulus Burhanuddin
Architecture, Civil and Environmental Engineering Gaharu 1 Dr. Ahmad Perwira Mulia
Electrical Engineering, Science and Technology Gaharu 2 Dr. Emerson P. Sinulingga
PRESENTATION SCHEDULE
The schedule is priority; however, vacant slot(s) may be filled by other presenter(s) of the same
group.
Chemical Engineering 1
No. ID Title Author(s) Time
1 E004 Annealing Optimization in The Process of
Making Membrane PSf19%DMFEVA2
for Wastewater Treatment of Palm Oil
Mill Effluent
Aja Avriana Said,
Mustafa
07.30-07.40
2 1229 Study on Energy Productivity Ratio (EPR)
at Palm Kernel Oil Processing Factory:
Case Study on PT-X at Sumatera Utara
Plantation
Bode Haryanto, Rina Br.
Bukit, Elfrida
M.Situmeang, Christina
Eka P., Florentina
Pandiangan
07.40-07.50
3 1274 Activated carbon production from bagasse
and banana stem at various times of
carbonization
Erni Misran, Seri
Maulina, Sari Farah Dina,
Ahlun Nazar, Surya Adi
Anggi Harahap
07.50-08.00
4 1189 Efect of Pressing Temperature on he
Mechanical Properties of Waste
Styrofoam Filled Sawdust Composite
H Nasution, H Harahap,
R Riani and A I Pelawi
08.00-08.10
5 1474 Effect of Nanocrystals Cellulose as a Filler
from Corn Cob with Dispersion Agent
Polyvinyl Pyrrolidone in Natural Rubber
Latex Film After Aging Treatment
Hamidah Harahap,
Muhammad Ridha,
Halimatuddahliana,
Taslim, Iriany
08.10-08.20
6 1279 Composting of Empty Fruit Bunches
Mixed with Activated Liquid Organic
Fertilizer in the Tower Composter – Effect
of Air Intake Holes
Irvan, T Husaini, B
Trisakti, Fatimah, and H
Daimon
08.20-08.30
7 1248 The Effect of Addition Nanoparticle
Chicken Egg Shell Fillers On
M Lubis, M Bangun, MH
S Ginting, DM T
13.30-13.40
Biocomposite Acrylic Resin for Denture
Base
Hasibuan, NF Dalimunthe
8 E005 Effect of Solvent Volume Ratio And Time
Extraction Of Glycerol Purification
M S Sinaga, G Rico, A N
Nababan, T A Manullang
13.40-13.50
9 1297 Utilization of Mango Seed Starch in
Manufacture of Bioplastic Reinforced with
Microparticle Clay Using Glycerol as
Plasticizer
Maulida, M. Hendra S.
Ginting, Trecy Kartika,
Alissha Tesanika1, Mara
Bangun Harahap
13.50-14.00
10 1176 The Effect of Carbon Black (CB) Loading
on Curing Characteristics and Mechanical
Properties of Virgin Acrylonitrile
Butadiene Rubber (NBRv)/Recycled
Acrylonitrile Butadiene Rubber (NBRr)
Blends
Muhammad Anas
Husnan, Hanafi Ismail,
Raa Khimi Shuib
14.00-14.10
11 1487 Morphology and Thermal Stability of
Nano Titanium Dioxide Filled Natural
Rubber Prepared by Latex Mixing Method
N Hayeemasae1, I Surya
and H Ismail
14.10-14.20
12 1220 Tensile Properties and Water Absorption
Assessment of Linear Low-Density
Polyethylene/Poly (Vinyl Alcohol)/Kenaf
Composites: Effect of Eco-Friendly
Coupling Agent
Pang Ai Ling, Hanafi
Ismail1, and Azhar Abu
Bakar
14.20-14.30
13 1338 Influence of the Weighing Bar Positionin
Vessel onMeasurement of Cement’s
Particle Size Distributionby Using the
BuoyancyWeighing-Bar Method
R Tambun, RO
Sihombing, A
Simanjuntak, F Hanum
14.30-14.40
14 1290 Influence of the Weighing Bar Size to
Determine Optimal Time of Biodiesel-
Glycerol Separation by Using the
Buoyancy Weighing-Bar Method
R Tambun, Y
Sibagariang, J Manurung
14.40-14.50
15 1469 Palm Ethyl Ester Purification by Using
Choline Chloride – 1,2 Propanediol as
Deep Eutectic Solvent
Renita Manurung, M.
Arif Alhamdi, Ardian
Syahputra
14.50-15.00
16 1400 Utilization of Oil Palm Fronds in Seri Maulina, and Fikri 15.00-15.10
Producing Activated CarbonUsing
Na2CO3 as an Activator
Naufal Anwari
17 E002 Isothermal approach to predict the removal
efficiency of β-carotene adsorption from
CPO using activated carbon produced
from tea waste
Surya Adi Anggi
Harahap, Ahlun Nazar,
Mia Yunita, Rizki A
Pasaribu, Fery Panjaitan,
Erni Misran
15.10-15.20
18 1482 Biodiesel Production from Rice Bran Oil
by Transesterification Using
Heterogeneous Catalyst Natural Zeolite
Modified withK2CO3
Taslim, Iriany, Okta Bani,
S.Z.D.M. Parinduri, and
P.R.W. Ningsih
15.20-15.30
Extension 15.45-16.45
Chemical Engineering 2
No. ID Title Author(s) Time
1 1311 The Use of the Kelor Seeds (Moringa
Oleifera) As Alternative Coagulant in
Waste Delivery Process of Textile
Industrial Waste
A.Mulia Rambe, Setiaty
Pandia, M. Hendra S.
Ginting, Rondang Tambun,
Bode Haryanto
07.30-07.40
2 1420 Production of Oil Palm Empty Fruit
Bunch Compost for Ornamental Plant
Cultivation
B Trisakti, P Mhardela, T
Husaini, Irvan, and H
Daimon
07.40-07.50
3 1419 Effect of Pieces Size of Empty Fruit
Bunches Mixed (EFB) on Composting
of EFB with Activated Liquid Organic
Fertilizer
Bambang Trisakti, Permata
Mhardela, Teuku Husaini,
Irvan, and Hiroyuki Daimon
07.50-08.00
4 1225 Foam Capacity and Stability of Sodium
Dodecyl Sulfate (SDS) on the Presence
of Contaminant Coffee and Cdions in
Solution
Bode Haryanto, Chien-
Hsiang Chang, An-Tsung
Kuo, Siswarni M. Z.,
Tongam M. A. Sinaga
08.00-08.10
5 1188 Physical Properties of Sago Starch
Biocomposite Filled with
Nanocrystalline Cellulose (NCC) from
Biomass Rattan: The Effect of Filler
Loading and Co-Plasticizer Addition
H nasution, H Harahap, M T
Al Fath, Y Afandy
08.10-08.20
6 1479 Effects of alkanolamide and epoxidation
in natural rubber and epoxidized natural
rubbers compounds
Indra Surya, Syahrul Fauzi
Siregar, Hanafi Ismail
08.20-08.30
7 E008 Fermentative Utilization of Glycerol
Residue for the Production of Acetic
Acid
Irvan, B Trisakti, R
Hasibuan1 and M Joli
13.30-13.40
8 1465 Supply of Avocado Starch (Persea
Americana Mill) as Bioplastic Material
M H S Ginting, R Hasibuan,
M Lubis, F Alanjani
13.40-13.50
9 1483 Analysis of Carbon Monoxide (CO)
with Delhi Finite Line Source (DFLS)
M. Turmuzi, Isra’ Suryati,
Eva Tiorillys Maslahy,
13.50-14.00
in MT Haryono Street, Medan City Fatimah Batubara
10 1481 Effect of pH and Complementary Ion
Concentration on Nitrate Removal using
Purolite A400 Resin Impregnated Cu in
Batch System
M. Turmuzi, Zafira
Nurulfitri Tarigan, Lavenia
Nadapdap,FatimahBatubara
14.00-14.10
11 1471 Production of Bioplastic from Jackfruit
Seed Starch (Artocarpus heterophyllus)
Reinforced with Microcrystalline
Cellulose Cocoa Pod Husk (Theobroma
cacao L.) using Glycerol as Plasticizer
Maulida Lubis, Mari B.
Harahap, Muhammad
Hendra S. Ginting, Arif
Gana, Siti Maysarah
14.10-14.20
12 1310 Optimization of Palm Fruit Sterilization
by Microwave Irradiation using
Response Surface Methodology
Maya Sarah, Isti Madinah H
and Siti Salamah N
14.20-14.30
13 1407 Red Palm Oil Production by Microwave
Irradiation
Maya Sarah, Sinta
Widyastuti, Dwi S. Ningsih
14.30-14.40
14 1488 Drying kinetics and characteristics of
dried gambir leaves using solar heating
and silica gel dessicant
R. Hasibuan, J. Hidayati, R.
Sundari,and A.S.
Wicaksono
14.40-14.50
15 1398 Shell of Rubber Fruit (Hevea
brasiliensis) as Biosorbent to Remove
FFA (Free Fatty Acid) Content in CPO
(Crude Palm Oil)
S Pandia, M S Sinaga, Z
Masyithah, A Husin, S
Nurfadilla, Fitriani
14.50-15.00
16 1399 Effect of Fermentation Time of Mixture
of Solid and Liquid Wastes From
Tapioca Industry to Percentage
Reduction of TSS (Total Suspended
Solids)
S Pandia, S Tanata, M
Rachel, C Oktiva , N
Sialagan
15.00-15.10
17 1307 Characteristics of Activated Carbon
Resulted from Pyrolysis of The Oil
Palm Fronds Powder
Seri Maulina 15.10-15.20
18 1308 Liquid Smoke Characteristics from the
Pyrolysis of Oil Palm Fronds
Seri Maulina and Frist Silia 15.20-15.30
Extension 15.45-16.45
Architecture, Civil and Enviromental Engineering
No. ID Title Author(s) Time
1 1127 The Study of the Influence of
Functionalism and International Style on
Architecture Development in Medan City
I F Pane, M N Loebis, I
Azhari, N Ginting, D D
Harisdani
07.30-07.40
2 1504 The Estimation of Parameter Compaction
Values For Pavement Subgrade Stabilized
With Lime
A S Lubis, Z A Muis and
C A Simbolon
07.40-07.50
3 1096 The Roles of Weather Modification
Technology in Mitigation of the Peat Fires
During a Period of Dry Season in
Bengkalis, Indonesia
A Sandhyavitri, M.A
Perdana, S Sutikno, F H
Widodo
07.50-08.00
4 1492 The Study of Stiffness Modulus Values for
AC-WC Pavement
Adina S Lubis, Z A Muis
and Tommy D. Iskanda
08.00-08.10
5 1150 The Success Strategies for Implementing
The Public Private Partnership in the
Water Supply Scheme in Batam, Indonesia
Ari Sandhyavitri,
Herdiansyah, Andy
Hendri
08.10-08.20
6 E01
5
Post Occupancy Evaluation of Energy-
efficient Bahavior in Informal Housing of
High Density Area
Dwira Nirfalini Aulia,
Beny OY Marpaung
08.20-08.30
7 1271 Impact Of Pozzolanic Binder Addition On
Stabilization Of Polluted Dredged
Sediments On Its Potential Reuse As A
New Material Resources For Road
Construction In Basse Normandie, France
Ernesto Silitonga 13.30-13.40
8 1250 Examining of solid waste generation and
community awareness between city center
and suburban area in Medan City,
Indonesia
H Khair AM, C N Putri,
R A Dalimunthe and T
Matsumoto
13.40-13.50
9 1154 Green Design Application on Campus To
Enhance Student’s Quality of Life
Hilma Tamiami
Fachrudin Khaira Amalia
Fachrudin
13.50-14.00
10 1088 Comparison of compressive strength of
paving block with a mixture of Sinabung
ash and paving block with a mixture of
Sinabung and lime ash
Ika Puji Hastuty, Irwan
Suranta Sembiring and
Nursyamsi
14.00-14.10
11 1089 Feasibility study on intersection in North
Sumatera
Ika Puji Hastuty, Irwan
Suranta Sembiring,
Ridwan Anas, and Adina
Sari Lubis
14.10-14.20
12 1317 California Bearing Ratio (CBR) test on
stabilization of Clay with Lime addition
Ika Puji Hastuty,
Roesyanto, Johan
Oberlyn S and
Muhammad Novratama
Limbong
14.20-14.30
13 1160 Study of Carbon Dioxide Emission
Inventory from Transportation Sector at
Kualanamu International Airport
Isra’ Suryati,
IvanIndrawan, Karina
Nursyafira Alihta
14.30-14.40
14 1327 The effect of shearwall location in resisting
earthquake
Johannes Tarigan,
Torang Sitorus, Joshua
Manggala
14.40-14.50
15 1480 Passenger Car Equivalents of Becak
Bermotor at Road Segment in Medan
M Surbakti and 14.50-15.00
16 1493 Priority of Road Maintenance Management
Based on Halda Reading Range on
NAASRA method
M Surbakti and Doan A 15.00-15.10
17 1494 Roundabout Performance Analysis in the
city of Medan
M Surbakti and
Iswahyudi F
15.10-15.20
18 1216 Performance Evaluation of Existing
Building Structure with Pushover Analysis
M.Agung Putra Handana,
Rahmi Karolina and
Steven
15.20-15.30
19 E00
7
Symbolizing The Chinese Identity As
Pekong At The District of Pekan Labuhan
Morida Siagian 15.45-15.55
20 1042 The Study Of Residential Life Support
Environment SystemTo Initiate Policy On
Nelson M. Siahaan, Agus
S. Harahap, E. Nababan,
15.55-16.05
Sustainable Simple Housing Ernestasia Siahaan
21 1269 How Manageable A person Feels The
Place to be: Self-efficacy in Supporting
Tourism
Nurlisa Ginting, N.
Vinky Rahman, Achmad
D. Nasution, Amelia Tri
Widya
16.05-16.15
22 1092 Effect of HDPE Plastic Waste Towards
Batako Properties
Nursyamsi , Ivan
Indrawan, Vincent
Theresa.
16.15-16.25
23 1093 The Use of Glass Powder in Making
Batako
Nursyamsi, Ivan
Indrawan
16.25-16.35
24 1449 An application of the AHP in water
resources management:a case study on
urban drainage rehabilitation in Medan
City
Perwira Mulia Tarigan,
Dedi Rahmad, Robi
Arianta Sembiring, Rudi
Iskandar
16.35-16.45
25 1119 Impact Analysis of Leading Sub Sector on
Basic Sector to Regional Income in Siak
Regency, Riau Province
Puji Astuti, Idham
Nugraha, Firman
Abdillah
16.45-16.55
26 1094 Hydraulic Modeling of Flow Impact on
Bridge Structures: A Case Study on
Citarum Bridge
R I Siregar 16.55-17.05
27 E01
6
The Analysis of Non Autoclaved Aerated
Concrete with Substitution Fly Ash and
Bottom Ash
Rahmi Karolina and
Fadel Muhammad
15.45-15.55*
28 1051 The Effect of Steel Slag as a Coarse
Aggregate and Sinabung Volcanic Ash as a
Filler on High Strength Concrete
Rahmi Karolina, Alif
Lamra Amal Putra, Wafi
Muhammad
15.55-16.05*
29 E01
7
Optimization of Fly Ash and Bottom Ash
Substitution Against Paving Block
Manufacture According to SNI 03-0691-
1996 ( Experimental Study)
Rahmi Karolina,,
Syahrizal,Nirwan Lubis,
16.05-16.15*
30 1392 The Utilization of Stone Ash on Cellular
Lightweight Concrete
Rahmi Karolina,Yosua
Giovannie Christoffer,
Sianipar
16.15-16.25*
31 1224 Alternative of Raw Material’s Suppliers
Using Topsis Method In Chicken
Slaughterhouse Industry
Rahmi M Sari, Indah
Rizkya, Khalida
Syahputri,Anizar, Ikhsan
Siregar
16.25-16.35*
32 1163 Soil Settlement Analysis in Soft Soil by
Using Preloading System and
Prefabricated Vertical Drain in Runway of
Kualanamu Airport
Roesyanto, Iskandar R,
Silalahi M S A and
Fadliansyah
16.35-16.45*
33 1166 A Study of the Effectiveness of the Use of
Gypsum and Volcanic Ash against the
Stability of Clay Soil in Terms ofUCT
andCBR Value
Roesyanto, Rudi
Iskandar, Ika Puji
Hastuty, and Ade Indra
Utama Lubis
16.45-16.55*
34 1168 Clay Stabilization by Using Gypsum and
Paddy Husk Ash with Reference to UCT
and CBR Value
Roesyanto, Rudi
Iskandar, Ika Puji
Hastuty, Windy Oky
Dianty
16.55-17.05*
* Relocated to Rosewood 1 if necessary
Industrial Engineering 1
No. ID Title Author(s) Time
1 1032 Application Work Risk of Manual Material
Handling Operators Using Different Lifting
Methods
Anizar, A. Rahim
Matondang
07.30-07.40
2 1102 Waste Management as an Effort to Improve
Urban Area Cleanliness and Community
Income (Journal Review)
Juliza Hidayati, Bag
Kinantan, A. Rahim
Matondang
07.40-07.50
3 1172 Application of Lean Six Sigma to Waste
Minimization In Cigarette Paper Industry
KhalidaSyahputri, Rahmi
M Sari, Anizar, Indah
Rizkya T, Ikhsan Siregar
07.50-08.00
4 1185 Application Study of Evolutionary Operation
Methods In Optimization of Process
Parameters for Mosquito Coils Industry
E Ginting and M
Tambunan
08.00-08.10
5 1187 Production Facility Layout by Comparing
Moment Displacement Using BLOCPLAN
and ALDEP Algoritm
M. Tambunan, E. Ginting
and R.M.Sari
08.10-08.20
6 1231 The Material Handling Cost Analysis for
Chinese Traditional Praying Paper Industry
Harmein Nasution, Irwan
Budiman
08.20-08.30
7 1234 Enhancing Efficiency of Production Cost on
Seafood Packaging Process with Activity
Based Management Method
Ukurta Tarigan and Uni P.
P. Tarigan
13.30-13.40
8 1262 Re-Designing Illumination Level in Printing
Working Area
Dini Wahyuni, Mangara T.,
N. Panjaitan, I. Budiman
13.40-13.50
9 1263 Study of Activity Based Costing
Implementation for Palm Oil Production Using
Value Added and Non Value Added Activity
Considerations in PTPN IV Pabatu Palm Oil
Mill
Meilita Tryana Sembiring,
Dini Wahyuni, Tuti Sarma
Sinaga, Andre Silaban
13.50-14.00
10 1273 Determination Standard Time Test
Parameters Of Testing Liquid Waste In
Baristand Industri Medan
Dewi Kusumawaty and
Meilita T. Sembiring
14.00-14.10
11 1278 Productivity Improvement with Green
Productivity Approach to Palm Oil Factory
Nazaruddin Matondang
14.10-14.20
Industrial Engineering 2
No. ID Title Author(s) Time
1 1486 The Lean Ergonomics in Green Design of
Crude Palm Oil Plant
Listiani Nurul Huda, Rahim
Matondang
07.30-07.40
2 1496 Production Layout Improvement By Using
Line Balancing and Systematic Layout
Planning (SLP) at PT. XYZ
Buchari , UkurtaTarigan,
Marthin Brian Ambarita
07.40-07.50
3 1503 The Effect of Material Productivity on Scrap
Reduction on Aluminum Reduction Pot
Process
Listiani Nurul Huda 07.50-08.00
4 1252 Evaluation of Work Posture and Quantification
of fatigue by Rapid Entire Body Assessment
(REBA)
Indah Rizkya, Khalida
Syahputri, Rahmi M Sari,
Anizar, Ikhsan Siregar
08.00-08.10
5 E006 Developing Strategic Planning of Green
Supply Chain in Refinery CPO Company
Juliza Hidayati ,Ghaleeb
Mumtaz ,Sawarni
Hasibuan
08.10-08.20
6 1476 Determining the Need for Improvement of
Infant Incubator Design with Quality Function
Deployment Method in an Hospital at
Kabanjahe
U. Tarigan, R. Ginting and
I. Siregar
08.20-08.30
7 1082 Increased Productivity Through Waste
Reduction Effort In Oil and Gas Company
Juliza Hidayati, Nukhe A.
Silviana, R. A.Matondang
13.30-13.40
8 1182 Design of Mathematical Models Assessment of
Work Achievements Based on Spencer
Competency in PT. Z
Khawarita Siregar 13.40-13.50
9 971 Layout design in order to improve efficiency in
manufacturing
Ikhsan Siregar, Ukurta
Tarigan, Tigor H. Nasution
13.50-14.00
10 1241 Application of quality function deployment
(QFD) method and kano model to redesign
palm fruit sorting tool
Anizar, I Siregar, I Yahya,
and N Yesika
14.00-14.10
11 1490 System Simulation Application for
Determining the Size of Daily Raw Material
Humala L Napitupulu 14.10-14.20
Purchases at PT.XYZ
12 E009 Proposed Planning Of Schedule Machine
Schedule With Reliability Centered
Maintenance (RCM) Method And
Identification Of 5s Application In PT. XYZ
Nurhayati sembiring,
Nismah Panjaitan, Agni
FitalokaSaragih
14.20-14.30
13 E010 Design Of Preventive Maintenance System
With Reliabilty Engineering And Maintenance
Methods Value Stream Mapping (Mvsm) In
PT. XYZ
Nurhayati sembiring,
Nismah Panjaitan, Sania
Angelita
14.30-14.40
14 E003 Establishing Value Of Ceramic Solid Waste
Into Light Weight Concrete
Ukurta Tarigan, Herbert
Ray P, Uni P. Tarigan
14.40-14.50
Mechanical Engineering 1*
No. ID Title Author(s) Time
1 1039 Effect of engine load and biogas flow rate to the
performance of a compression ignition engine
run in dual-fuel (diesel-biogas) mode
Himsar Ambarita 14.20-14.30
2 1037 Numerical study on natural convection between
double glasses top cover of flat plate solar
collector
HimsarAmbarita 14.30-14.40
3 1260 Energy Analysis of Biomass Organic Rankine
Cycle for Power Generation
Taufiq Bin Nur, Sunoto 14.40-14.50
4 1475 Manufacture and Impact Analysis of BMX
Helmet Made From Polymeric Foam Composite
Strengthened by Oil Palm Empty Fruit Bunch
Fiber
Mahadi 14.50-15.00
5 1258 Design and Process Integration of Organic
Rankine Cycle Utilizing Biomass for Power
Generation
Safrul Ependi, Taufiq Bin
Nur
15.00-15.10
*Rosewood 2
Mechanical Engineering 2*
No. ID Title Author(s) Time
1 1040 Experimental study on a prototype of heat pipe
solar water heather using refrigerant R134a as a
transfer fluid
Tekad Sitepu, Jesaya
Sembiring and Himsar
Ambarita
15.10-15.20
2 1125 Analysis of Vehicle braking behaviour and
distance stopping
M Sabri, Ardhian fauza 15.20-15.30
3 1401 Performance and emissions of otto engine fueled
by biogas of palm oil mill effluent
J. Arjuna, T. B. Sitorus, H.
Ambarita, S. Abda
15.45-15.55
4 1402 Performance of natural cooler to keep the
freshness of vegetables and fruits in Medan city
T. B. Sitorus, H. Ambarita,
F. Ariani, T. Sitepu
15.55-16.05
*Rosewood 2
Electrical Engineering
No. ID Title Author(s) Time
1 1256 Implementation of Bayesian Model Averaging
on the Weather Data Forecasting Applications
Utilizing Open Weather Map
R. F.Rahmat, F R Nasution,
Seniman, M.F. Syahputra
and O S Sitompul
07.30-07.40
2 1330 Supercapacitor Performance Evaluation in
Replacing Battery Based on Charging and
Discharging Current Characteristics
Arman Sani, Suherman,
Naemah Mubarakah
07.40-07.50
3 E018 The effect of various parameters of large scale
radio propagation models on improving the
performance of mobile communications
Maksum Pinem, Rahmad
Fauzi
07.50-08.00
4 1192 High Voltage Distribution System (HVDS)
and Low Voltage Distribution System (LVDS)
Comparison for Medan City Power Networks
R Dinzi, TS Hamonangan,
F Fahmi
08.00-08.10
5 1200 Analysis of Temperature Changes on Three-
Phase Synchronous Generator Using Infrared:
Comparison between Balanced and
Unbalanced Load
S Amien, W Yoga, F Fahmi 08.10-08.20
6 1005 Energy Consumption Model on WiMAX
Subscriber Station
N. Mubarakah, Suherman,
M. Yudha A., Edi Warman
08.20-08.30
7 1006 Energy-Signal Quality Trade-offs in a WiMAX
Mobile Station with a Booster Amplifier
Marwan Al-Akaidi,
Suherman, Naemah
Mubarakah, Oktripani
Wiranata
14.10-14.20
8 1406 Numerical simulation on thermal plasma
temperature eld in the torch for different
conditions
Y Siregar, N Kodama, Y
Tanaka, T Ishijima, Y
Uesugi
14.20-14.30
9 1236 Design and Analysis of Microstrip Dipole
Antenna Using Fractal Kotch for 433 MHz
Application
M. Zulfin, A.H. Rambe and
Budi Budi
14.30-14.40
10 1235 A Low Profile Rectangular Patch
Microstrip Antenna for Dual-Band
Operation of Wireless Communication
Ali Hanafiah Rambe and
Khairil Abdillah
14.40-14.50
System
11 1366 Automatic Control Model of Water Filling
System with Allen Bradley Micrologix 1400
R Harahap, AF Adyatma, F
Fahmi
15.55-16.05
12 1301 Characterization of Low Impedance 3D
Coplanar Waveguide Interconnects for
Compact MMICs
E. P. Sinulingga1, P. B. K.
Kyabaggu, C. D. Sedayu,
and A.A.Rezazadeh
16.05-16.15
13 1300 De-embedding Technique for Accurate
Modeling of Compact 3D MMIC CPW
Transmission Lines
Ummu H Pohan, PB
KKyabaggu, and Emerson
P.Sinulingga
16.15-16.25
14 1302 Effect of Feeders in 3D Modelling of Low
Impedance Multilayer CPW Transmission Line
Royza Iqbal Zaini, Peter
K.Kyabaggu, and Emerson
P.Sinulingga
16.25-16.35
15 1463 Multistage Switching Hardware and Software
Implementations for Student Experiment
Purpose
Arman Sani, Suherman 16.35-16.45
Science and Technology
No. ID Title Author(s) Time
1 E012 Research Mapping in North Sumatra Based on
Scopus
Mahyuddin K. M.
Nasution,Runtung Sitepu,
Rosmayati,Darma Bakti, S.
M. Hadi
13.30-13.40
2 E013 Sumut Siana Mahyuddin K. M. Nasution 13.40-13.50
3 1445 Microencapsulation of Vitamin E from Palm
Fatty Acid Distillate with Galactomannan and
Gum Acacia using Spray Drying Method
J. Br. Tarigan, J.
Kaban1and R. Zulmi
13.50-14.00
4 1215 Oriented Particle Board Made from Tali
Bamboo (Gigantochloa apus): Effect of Particle
Length on Physical and Mechanical Properties
Apri Heri Iswanto 14.00-14.10
5 1178 Synthesized of PEG-6000 Coated MgFe2O4
Nanoparticles Based on Natural Iron Sand by
Co-precipitation Method
Eko Arief Setiadi, Silviana
S., Adinda Suci Pratiwi
Saputra, Eddy Marlianto,
Djuhana, C. Kurniawan
14.50-15.00
6 E001 Effect of Sintering Temperature on the
Microstructure, Electrical and Magnetic
Properties of Zn0.98Mn0.02O Material
Kerista Sebayang, Didik
Aryanto, Silviana S., C.
Kurniawan, Selamat F.
Hulu, T. Sudiro, Masno
15.00-15.10
7 1161 Deforestation and reforestation analysis from
land-use changes in North Sumatran mangroves,
1990-2015
M Basyuni and N
Sulistiyono
15.10-15.20
8 1243 Quality Improvement of Lamina Board Made
from Oil Palm Trunk with Outer Layer
Variation Using Phenol Formaldehyde Adhesive
R Hartono and T SuciO 15.20-15.30
9 1255 Substitution of pig feed preparation using
firewood with biogas in Samosir Island:
Transforming an environmental catastrophe into
environmental, social, economic benefits
Nurzainah Ginting 15.45-15.55
10 1254 Sustainable brooder on supporting local chicken
in North Sumatera Province, Indonesia
N Ginting, R Hidayat
15.55-16.05*
11 1213 Morphological Study of Fluorescent Carbon
Nanoparticles (F-CNPs) From Ground Coffee
S Gea, S Tjandra, Joshua, B 16.05-16.15*
Waste Soot Oxidation by Diluted Acid Wirjosentono
12 1367 Sodium Tripolyphosphate Cross-linked
Chitosan Based Sensor for Enhacing Sensing
Properties towards Acetone
T I Nasution, R Asrosa, I
Nainggolan, M Balyan, R
Indah, A Wahyudi
16.15-16.25*
13 1408 Improved Lifetime of Chitosan Film in
Converting Water Vapor to Electrical Power by
Adding Carboxymethyl Cellulose
T I Nasution, M Balyan, I
Nainggolan
16.25-16.35*
14 1349 Study on Chitosan Film Properties as a Green
Dielectric
I Nainggolan, T I Nasution,
S R E Putri, D Azdena, M
Balyan, H Agusnar
16.35-16.45*
15 1345 Humidity Detection Using Chitosan Film Based
Sensor
T I Nasution, I Nainggolan,
D Dalimunthe, M Balyan,
R Cuana, S Khanifah
16.45-17.05*
*Relocated to Sandalwood if necessary
HOW TO REACH THE VENUE
1. Arriving at Kualanamu Airport
a. Train from Kualanamu-Medan Railway Station
AIRPORT TRAIN TIME SCHEDULE
Ticket price is about Rp.100,000.00 one way. It takes about 45 minutes, depending on the
number of train as shown in Tabel. Tickets are availableonline www.railink.co.id
b. 7 minutes Walking from Medan Railway Station to Grand Aston Hotel
Medan railway station is located in the east of Lapangan Merdeka, while Grand Aston Hotel
in the west side of Lapangan Merdeka. Alternatively, one can use the pedicabs or taxi.
2. Arriving in Medan by Car
- Find direction to Lapangan Merdeka (Merdeka Walk) as shown in the map.
- Grand Aston is on Jl. Raden Saleh, just about the corner of Jl.Raden Saleh and Jl.
Balaikota.
- Alternatively, one can take bus “DAMRI” from kualanamu airport to Medan, but there is
no direct route to the venue. Taxi and online transporation (Grab Car) are available in
Medan.
VENUE LOCATION AND LAY OUT
Grand Aston Hotel has two lobbies: Hotel Area and Apartment Area. Mahagony Ball Room is
located at first floor of the Apartment Area; Rosewood, Sandalwood and Gaharu are located on
the second floor of the Hotel Area.
Website:
https://www.astonhotelsinternational.com/en/hotel/view/42/grand-aston-city-hall-medan?
Venue Layout