Conexis L1 Manual
Transcript of Conexis L1 Manual
Conexis® L1 Manual
The Secure, Keyless
Smart Door Lock
The smarter way to protect your home•
Discover Our Range of Products
ALARMS
CCTV
ACCESSORIES
Yale® Connected
Secure, monitor and control your
home with a range of smart
security devices from Yale.
Whether it’s a Smart Door Lock,
an Alarm or CCTV system, Yale
Smart Living products put you in
control of your home security.
HOME VIEW CAMERAS
SMART DOOR
LOCKS
The smarter way to protect your home•
Introduction
Thank you for choosing the Yale Conexis® L1 Smart Door Lock.
This simple to install product has been designed with the user
in mind. Please read this manual completely before using the
Yale Conexis® L1 Smart Door Lock.
Contents
Installation 4
Unlock With Cards/Tags 17
Yale Lock App 18
Create Mobile Key Account 19
Adding Cards/Tags Via App 20
Unlock With Yale App 21
Locking The Conexis® L1 Smart Door Lock 22
Battery Indicator 23
Pairing With A Third Party Gateway 24
Factory Reset 25
Search for Conexis® L1 Installation
Video on You Tube
For more information on this product
and Yale Smart Living Range visit Consumer Support:
[email protected] Tel: 01902 364606
The 2 year guarantee for this
2 product is active from the date
of purchase (A copy of this guarantee is available on our website).
Hereby, ASSA ABLOY UK Ltd declares that the Conexis® L1 Smart Door Lock is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
3
ConexisTM L1 Smart Door Lock
INSIDE
Radio Cover
Inside LED
OUTSIDE
Key Card/Tag Reader
Bluetooth Wakeup
Button and LED
Lever Handle Lever Handle
Thumbturn
Backup 9V
Battery Cover contacts
Tools Required
4
Inside The Box
4x AA Alkaline
Fixing Pack A
The smart way to protect your home.
Fixing Pack B Fixing Pack C Fixing Pack D
55mm 70mm 80mm
145mm 160mm 170mm
5
Remove the Current Handle•
4
3
Do not close door until installation
is complete.
1
Please make a note of your current fixing screws. 2 You should have 2 or 3 as below.
Remove the cylinder 2
1
6
Measuring Your Door
Please measure the thickness of the door
and the distance between the centre of the
lock and the inside of the door to select the
correct xing pack and tailbar.
Fixing Pack B Fixing Pack C Fixing Pack D
INSIDE
55mm 70mm 80mm
145mm 160mm 170mm
Door thickness Door thickness Door thickness 44-50mm 58-65mm 70mm
21mm - 26mm
26mm - 31mm Short
31mm - 36mm Tailbar
36mm - 41mm
41mm - 46mm
Long
46mm - 51mm Tailbar
7
Install lock Actuator•
1
2
1 2
Tip: After installing actuator make sure it is not tilted in the door.
Please screw lug into position to line up with previous handle xing screws (see page 6).
8
Fit External Handle•
Lugs can be slid up and down to t current xing holes.
3
x 2
2 1
Slide the lug up or down to align with the holes in the door.
2
1
9
Fit Internal Fixing Plate•
2
1
No longer required
Note 3
Tip: Slightly
removing
the external
handle from
outside the
door can
help line up
2 the xing
screws.
Insert xing screws to line up with
previous handle 1 Do not fully
screws.
tighten.
10
Unit Alignment•
Make sure handle is parallel to door on both sides.
2
1
INSIDE
3
OUTSIDE
Please ensure that
alignment tool is at
against the door
as screws are
tightened.
6
4
5
11
Fitting Internal Handle•
o longer
required
1
Red
2 Red
Make sure arrows are facing up
3 Do not turn
1
thumbturn until
installation is
complete (page 16)
2
Please make sure cable is tucked into allocated slot when fitting handle.
12
Installation Guide
2
1
Loosely tighten
3
Do not turn
thumbturn until
installation is
complete (page 16)
4
2
Make sure handle operates freely once screws are tightened.
1 Check seal!
Then tighten screws
3
4
13
Handing Procedure•
2 1
Alkaline Batteries
Only
1
Hold R Button for 15 sec. “Beep Beep”
2 Push Down
& Release
“Beep Beep”
2 Push Up
& Release
“Beep Beep
Beep ”
Motor should lock & unlock
14
Pairing of Initial Credential•
Initial pairing mode is designed to allow you to pair 1 Card or Tag before you connect
a smartphone to your lock. Further cards or tags can be added through the app once
installation is complete.
1 Press “R” Button to Start
“Beep Beep”
Mode
Learn PURPLE
Success GREEN
Timeout RED
Place card/
tag just below
2 Yale badge
The smart way to protect your home. or
3 “Beep”
3 Press “R”
Button to Finish
“Beep Beep Beep”
INSIDE
OUTSIDE
Please keep this card/tag on you as your backup
credential at all times when leaving the house.
15
Installation Checklist
Before shutting your door in frame, please test
the following things...
A While the door is open, lift the lever handle to lock. Make sure the motor operates smoothly.
B Test to make sure the lever handle cannot be pushed down.
C Push the thumbturn in on the inside handle and turn 180 degrees to unlock the door.
D Push the lever handle down and make sure it returns by itself.
E Lift the lever handle to lock again.
F Tap one of the paired Cards/Tags on the outside handle under the Yale logo. Make sure it unlocks and the lever handle can be pushed down.
Your installation is now complete. If you have issues with any of the above, please contact: Consumer Support: [email protected] Tel: 01902 364606
16
Unlock With Cards/Tags
1
OUTSIDE
2
Green
The
smart way to
protect your home.
Green
The smart way to protect your home.
Green
Place card/tag just below Yale badge
3
Green
17
Yale Lock App
1. Search on app store ConexisYALE LOCKL1
®
21. Download App
YALE LOCK
LOCK
32. Create Account
LOCK
Login E-mail E-mail
Password Password
Login
Password Reset
Create Account
Send Feedback
LOCK
User Registration First name First name
Last name Last name
E-mail E-mail Password Password Confirm Password Password
Questions What time of the day were you born? (hh:mm) Answer
18
Create Mobile Key
1 YALE Add New Lock
Your key ring is currently empty. A user may send you a key using your account e-mail:
Or press ‘Add New Key’ and configure your
own Yale lock.
2 Add New Lock
Name your lock
A lock would typically be named by its location or purpose.
E.g. Front Door
Cancel OK
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
123 space return
3 Press “R” Button to Start
OUTSIDE
4
Purple
te
comple revocation
Key
Blue
INSIDE
Touch Purple light to make it turn blue
6
5
Only one phone can be paired to lock. This phone can then share the key to other users
by tapping key & press manage users.
19
Adding Additional Cards/ Tags Via App•
Lock ‘name’ Add New Lock Lock ‘name’ Add New Lock Cards/Tags Lock Menu
Details
Cards/Tags
Audit
2
Lock Name
Settings
1 Date & Time New Card/Tag 3
Cards/Tags Press the Bluetooth
wakeup button
Cards/Tags 5
Name
Cancel OK
Q W E R T Y U I
O P
A S D F G H J K L
Z X C V B N M 123 space return
4
Blue
Purple
7 Cards/Tags
6
Your Card/Tag ‘name’
The smart way to protect your home.
Green
“Beep Beep” users updated New Card/Tag
Your initial card/tag will appear as user 1 once a card/tag has been added through the app.
20
Unlock With Yale App
Your Smartphone must already have a mobile key for the lock to use this feature. If you’re setting up the lock for the first time please follow instructions on page 19, or the lock owner can send you a key.
1 2 OUTSIDE
LOCK
complete
Keyrevocation
Blue
3 4 90°
Key
revocation
complete
Green Green
Twist the phone 90º and back
up or press activate key button & GoTM to use the mobile key.
21
Locking The Conexis® L1 Smart Door Lock
“Beep beep beep”
Checking
22
Battery Indicator
Low Battery
OUTSIDE
“Beep beep beep Beep beep beep be be be be be”
No Battery
Key
r e
voc ati on compl ete
Green
1
2
Alkaline Batteries
2
Key revoca ti on
compl ete
Green
9V
Backup 9V contacts
1
23
Pairing With A Third Party Gateway
Connecting to a home automation system is a two-way process and may require the compatible
home automation system to be configured to look for a new device. Please consult the manual
that came with the system for more information.
1
2
Insert Connection
Module 3
3 Press “R” 3 times
2
Removing The Lock From A System 1 The lock may need to be removed from a home
automation system before being added to a new system.
To do this, please carry out the following:
1. Put the existing system into ‘Device Exclusion Mode’ 2. Press “R” Button 3 times within 1.5 seconds
24
Factory Reset
1
2
3
5
4 Disconnect inside handle completely. Remove batteries.
Press and hold “R”
1
Insert batteries while pressing button R Hold until “beep”
2 3
Remove batteries and install following installation instructions.
25
Notes 26
Notes
27
THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other
consumer locking solution.
THE ASSA ABLOY GROUP is the world’s
leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user
needs for security, safety and convenience.
/YaleUK /YaleSecurity /YaleSecurityUK Issue No. 1B
The smarter way to protect your home•