Cone
-
Upload
liming-hiew -
Category
Education
-
view
76 -
download
2
Transcript of Cone
A cone is a solid that has a circular base and a single vertex.
Right Cone- Vertex is over the center of the base.
Oblique Cone- Vertex is not over the centerof the base
The volume of a cone is given by the formula:
Where: r is the radius of the circular base, h is the height - the perpendicular distance from the base to the vertex.
Same for both right angle and oblique.
Volume =
The diagram below shows a conical container filled with water. The base of the cone lies on a horizontal table. The volume of water is 821 1/3 cm3.
Using pi = 22/7, calculate the height, in cm, of the water in the container.
The surface area of a cone is given by the formula
Where:r is the radius of the circular base, s is the slant height of the cone.
But there are no formulas for oblique cone.
A conical frustum is a frustum created by slicing the top off a cone (with the cut made parallel to the base).
To find the slant height, we have to use
The formula of the surface area isArea=
without the area for both circles.
The formula for frustum of a pyramid or frustum of a cone is given by
Where:h = perpendicular distance between A1 and A2 (h is called the altitude of the frustum)A1 = area of the lower baseA2 = area of the upper baseNote that A1 and A2 are parallel to each other.
http://www.mathalino.com/reviewer/derivation-of-formulas/derivation-of-formula-for-volume-of-a-frustum
Calculate the: 1) Volume of the cone.
2) Surface area of the cone.
3) Volume of the conical frustrum.
4) Surface area of the conical frustrum.
Height of water = 7