Cone-ring flexible couplings Heavy and Medium...
1
Cone-ring flexible couplings Heavy and Medium duty Driving half Driven half Selection of Coupling kW capacity required = kW to be transmitted x service factor. Nature of Load from Driven Machine with Electric Motor Prime Mover Uniform Moderate Shock Heavy Shock Service Factor 1,00 1,25 2,00 For applications in ambient temperatures above 121°C consult David Brown. Max. kW at 100 r/min x 9550 Max. Torque Capacity (N.m) = — Each size is capable of 100% momentary overload. Where a drive is subject to a cyclic variation of torque, the coupling size should be referred to us for verification. Conversion Factors Millimetresto inches Ib. ins. to N.m kgtolb. Divide by 25,4 Divide by 8,85 Divide by 0,45 The NYLICON Coupling range covers bore sizes below those shown here. Details in publication E.304.11. The GEAR TYPE Coupling range covers load capacities greater than those shown here. Details in publication E.304.24. Size 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1R 16 17 18 19 20 Max. Bore (mm) 38 42 48 60 70 80 90 100 120 140 150 170 180 200 230 255 280 305 330 355 Load Capacity Max. kW per 100 r. Rough Medium Heavy Bore (mm) 15 20 25 25 25 25 25 40 40 40 50 50 65 65 KB •0 ,S2 D CT 13 < Duty Type 0,75 1,1 1,9 3,0 4,3 10,3 14,15 21,25 35,4 48,5 — - — - — - — - — — Duty Type 1,5 2,2 3,8 6,0 8,6 20,6 28,3 42,5 70,8 97 126 196 274 356 600 794 1059 1297 1566 1976 p.m. Max. r.p.m. yl^OQ XV 4000 3400 3020 2700 2300 2090 1760 1570 1390 1290 1090 975 880 790 705 630 590 550 500 Approx. Total Weight Medium Heavy Dimensions (mm) A 64 70 83 97 117 127 147 180 206 230 256 296 330 366 406 ^ 458 508 533 572 610 B 3 3 3 3 3 3 3 3 6 6 6 6 6 6 6 6 6 6 6 6 C 48 56 61 68 76 88 100 117 132 147 165 188 210 236 264 292 311 324 330 366 D 134 147 171 193 215 254 279 330 371 419 457 533 597 660 737 X 826 927 990 1067 1155 E 14 14 17,5 17,5 17,5 30 30 30 46 46 46 63 63 63 76 76 76 76 76 76 F 28 28 41 41 41 56 56 57 76 76 76 91 91 91 122 122 122 122 122 122 H 28 20 28 25 18 51 56 28 53 46 28 51 23 10 56 18 _ — — — Duty (kg) 6 7 11 16 19 39 49 76 119 153 _ — _ _ _ _ — — — Duty (kg) 6 7 11 16 20 40 51 77 124 158 194 345 430 535 810 1106 1445 1660 1970 2440 Number of Pins Med. Dty. 3 4 3 4 5 4 5 6 5 6 — — — — _ — _ - — — Hvy. Dty. 6 8 6 8 10 8 10 12 10 12 14 — 10 12 14 12 14 16 18 20 22 Sizes 01 to 05 have three Cone-rings on each pin. Sizes 06 to 20 have four Cone-rings on each pin. As improvements in design are continually being made, this specification is not to be regarded as binding in detail and dimensions are subject to alteration without notice. Publication SA 120 Magnaprint 09103(10)
Transcript of Cone-ring flexible couplings Heavy and Medium...
Cone-ring flexible couplings
Heavy and Medium duty
Driving half Driven half
Selection of Coupling
kW capacity required = kW to be transmitted x service factor.
Nature of Load from Driven Machine withElectric Motor Prime Mover
Uniform Moderate Shock Heavy Shock
Service Factor 1,00 1,25 2,00
For applications in ambient temperatures above 121°C consultDavid Brown.
Max. kW at 100 r/min x 9550Max. Torque Capacity (N.m) = —
Each size is capable of 100% momentary overload. Where adrive is subject to a cyclic variation of torque, the coupling sizeshould be referred to us for verification.
Conversion FactorsMillimetresto inchesIb. ins. to N.mkgtolb.
Divide by 25,4Divide by 8,85Divide by 0,45
The NYLICON Coupling range covers bore sizes below those shown here. Details in publication E.304.11.The GEAR TYPE Coupling range covers load capacities greater than those shown here. Details in publication E.304.24.
Size
01020304050607080910111213141R
1617181920
Max.Bore(mm)
38424860708090100120140150170180200230255280305330355
Load CapacityMax. kW per 100 r.
Rough Medium HeavyBore(mm)
1520252525252540404050506565KB•0
,S2DCT13
<
DutyType
0,75
1,11,93,04,310,314,1521,2535,448,5—-—-—-—-——
DutyType
1,52,23,86,08,620,628,342,570,8971261962743566007941059129715661976
p.m.
Max.r.p.m.
yl^OQXV40003400302027002300209017601570139012901090975880790705630590550500
Approx. TotalWeight
Medium HeavyDimensions (mm)A
64708397117127147180206230256296330366406 ̂458508533572610
B
33333333666666666666
C
485661687688100117132147165188210236264292311324330366
D
134147171193215254279330371419457533597660737 X82692799010671155
E
141417,517,517,5303030464646636363767676767676
F
2828414141565657767676919191122122122122122122
H
28202825185156285346285123105618_———
Duty(kg)
67
111619394976
119153_
—_
__
_———
Duty(kg)
67
11162040517712415819434543053581011061445166019702440
NumberofPins
Med.Dty.
3434545656————_
—_-——
Hvy.Dty.
68681081012101214 —101214121416182022
Sizes 01 to 05 have three Cone-rings on each pin. Sizes 06 to 20 have four Cone-rings on each pin.
As improvements in design are continually being made, this specification is not to be regarded as binding in detail and dimensions are subject toalteration without notice.
Publication SA 120 Magnaprint 09103(10)
