Computer-Generated Hologram(CGH) generator control manual · 2017-11-06 · santec confidential 3...
Transcript of Computer-Generated Hologram(CGH) generator control manual · 2017-11-06 · santec confidential 3...
18.09.2017
Doc.: SS-17-0437-01
Computer-Generated Hologram(CGH)
generator control manual
santec confidential 1
CGH reconstruction
CGH creation
santec confidential 2
Flow of CGH program
Your target image Program CGH
Reconstruction imageCGH
635nm LD
SLM-100
Collimating lens
Fourier lens
CCD camera
Measure
reconstruction image
LCOS-SLM
santec confidential 3
Optical system (example)
X,Y=0,0X
Y
ex)
635nm LD
CGH Target image
Via CGH
creator
Reconstructed image
S-Polarization
(TE-Mode)
Collimating lens
Fourier lens
Fourier lens
focal length
SLM-100
Input polarization
shall be adjusted
to SLM X-axis.
OS
santec confidential 4
Recommended system requirements
Microsoft Windows 7 32bit
Microsoft Windows 7 64bit
Microsoft Windows 10 64bit
Display resolution
1280 x 800 or more resolution
santec confidential 5
1. Open “CGH_generator_Installer” in the attached CD-ROM data
2. Open the folder for your PC operating system
3. Open “CGH_generator.msi”
Program install [1]
santec confidential 6
4. Click “Next” button
Program install [2]
5. Click “Next” button
santec confidential 7
6. Click “Next” button 7. Click “Close” button
8. Shortcut is created on your PC’s desktop
*Please connect the SLM to PC and supply power to SLM before
launching the CGH program
Program install [3]
AC adapter
DVI/HDMI cable
※ Do not use attached AC adapter to in any other products.
santec confidential 8
Program execution
CGH creation
Please make sure the santec SLM-100 is connected to your computer before
launching the program as shown in the figure below.
Otherwise, CGH program can not be launched.
1
9
43
7
6
2
11Label Content
1 CGH generation program Main
2 Software version
3 Original image
4 CGH image
5 Computed reconstruction image
6 Display image on LCOS
7 CGH parameters
8 Start button of CGH calculation
9 CSV file path displayed on LCOS
10 Display button on SLM
11 Exit for CGH generation programsantec confidential 9
5
8
10
Main screen
santec confidential 10
1. Prepare BMP file for CGH generation
- Effective image size is 1024×1024 pixel
- 8 bit grayscale
1024 pix.
1024 p
ix.
2. Click “open image file” button
2
CGH generation [1]
santec confidential 11
Make sure to confirm
your original image on
the window
3. File dialog is displayed
Select original image pattern file for CGH
creation and click “Open”.
CGH generation [2]
santec confidential 12
4. Input the 2 parameters for CGH creation
Wavelength: The wavelength of the light source that was used
upper check box is the representative value
lower check box is the arbitrary value
*range 400-1650
Calculation number : Accuracy of hologram pattern
*integer value, range 1-1000
45
5. Select files type(s) for saving
CGH(.bmp): Calculated CGH pattern saving as BMP file type
CGH(.csv) : Calculated CGH pattern saving as CSV file type
Reconstruction CGH(.bmp):Hologram theoretical image after calculation
CGH generation [3]
santec confidential 13
6. Click “Start calculation” button
7. Save file dialog will appear appeared after
calculation completed. Input file
name and click “save” button
CGH generation [4]
santec confidential 14
8. The created CGH image and the
theoretical calculation image will appear
after saving of files are completed
CGH generation [5]
2. File dialog is displayed, then
select CSV file and click “Open”.
santec confidential 15
1
3. Click “Display on SLM” button to
Displayed your selected CGH image
after loading
1. Click “Open CSV file” button
Image pattern display to LCOS
santec confidential 16
Y: Vertical pixel number
0-1049
Gray scale level for each pixel : 0~1023 (10 bit)
0 to 1023 corresponds to 0 to 2p at 1500nm light.
X: Horizontal
pixel number
0-1439
CSV file format forgenerated CGH pattern
santec confidential 17
BMP file format for CGH generation
1024 pix.
1024 p
ix.
R:0
G:0
B:0
R:50
G:50
B:50
R:100
G:100
B:100
R:150
G:150
B:150
R:200
G:200
B:200
8 bit grayscale
santec confidential 18
Effective area of BMP image1024 pix.
10
24
pix
.1022 pix.
10
22
pix
.
Effective area
Non effective area