Computational Fluid Mechanics and Heat Transfer - Tannehill Anderson Pletcher
COMPUTATIONAL FLUID AND SOLID MECHANICS 2003 · COMPUTATIONAL FLUID AND SOLID MECHANICS 2003...
Transcript of COMPUTATIONAL FLUID AND SOLID MECHANICS 2003 · COMPUTATIONAL FLUID AND SOLID MECHANICS 2003...
COMPUTATIONALFLUID AND SOLIDMECHANICS 2003
ProceedingsSecond MIT Conference on Computational Fluid and Solid Mechanics
June 17-20,2003
Editor:K.J. BatheMassachusetts Institute of TechnologyCambridge, MA, USA
VOLUME 1
TECHNISCHEINFORMATIONSEiSLIOTHEK
UNIVERSITA7S3IBLIOTHEKHANNOVER2003
ELSEVIER
Amsterdam - Boston - Heidelberg - London - New York - OxfordParis - San Diego - San Francisco - Singapore - Sydney - Tokyo
Contents Volume 1
Preface v
Session Organizers vii
Fellowship Awardees ix
Sponsors xi
Plenary
Dvorkin, E.N.,Steel industry: simulation of production processes and product performance evaluation using finite elementmodels 2
Kaazempur-Mofrad, M.R., Younis, H.F., Karcher, H., Lin, J.W., Golji, J., lsasi, A.G., Tan, J.S., Chan, R.C.,Kamm, R.D.,Biological simulations at all scales: from cardiovascular hemodynamics to protein molecular mechanics 8
Kaxiras, E.,Simulations of complex systems across multiple length scales 13
Kochhar, N.K., Kelkar, S.G.,The role of CAE in product development at Ford Motor Company 15
he Tallec, P., Hauret, P.,Nonlinear schemes and multiscale preconditioners for time evolution problems in constrained structural dynamics 19
Mahesh, K., Constantinescu, G., Moin, P.,A numerical method for large-eddy simulation in complex geometries 23
Rieger, H.,Aerodynamic simulation in aerospace industry: status, needs and expectations from EADS 31
Vacherand, J.-M.,Consequences of modeling on tire development 36
Solids & Structures
Abou Ghadeer, M., Ye, J., Mansouri, A.H.,Interactions between strip and beam elements of a hollow block slab system 42
Akers, S.A., Windham, J.E.,Structure-medium interaction simulations 47
Amabili, M., Pellegrini, M.,Nonlinear vibrations of circular cylindrical panels 50
Andres, M., Harte, R.,On the buckling mechanisms of large-scale shell structures made of high-strength concrete 54
Arroyo, J.R., Sudrez, L.E.,Nonlinear seismic response of a soil deposit using the Volterra series 59
Arroyo, M., Belytschko, T.,Membranes and rods from lattice films and chains: modeling and computations 64
xiv Contents Volume I /Second MIT Conference on Computational Fluid and Solid Mechanics
Attia, M.S., Meguid, S.A., Liew, KM.,Multiscale modelling of crush behaviour of closed-cell aluminium foam 68
Avila, A.F., Avila Jr., J.,A new hybrid formulation for laminated composite materials analysis 72
Banerjee, A., Hancock, J.W.,Higher order terms for a crack terminating at the interface between mismatched solids 76
Banks-Sills, L., Ishbir, C,Calculation of stress intensity factors for bimaterial notches - thermal stresses 80
Bayart, A.-S., Langrand, B., Deletombe, E., Markiewicz, E., Drazetic, P.,Phenomenological modelling of structural embrittlement in perforated plates 83
Beghini, M., Bertini, L, Fontanari, V,Analysis of a partially closed oblique edge crack under surface travelling load 87
Benedetti, M., Bertini, L., Fontanari, V,Behaviour of small fatigue cracks emanating from notches in T1-6A1-4V 91
Benz, T,Bounding surface plasticity for cyclic loaded sand and its implementation 95
Bergstrom, J.S., Hilbert, L.B., Brown, S.B.,Large strain time- and temperature-dependent modeling of PTFE 99
Bernadou, M., Depeyre, S., He, S., Meilland, P.,Two-dimensional numerical simulations of magnetic domains in ferromagnetic microstructures 103
Bhalla, S., Naidu, A.S.K., Yang, Y.W., Soh, C.K.,An impedance-based piezoelectric-structure interaction model for smart structure applications 107
Bisagni, C,Development of a crashworthy subfloor concept for a commuter aircraft I l l
Borino, G, Cottone, G, Parrinello, F,A microplane model for plane-stress masonry structures 115
Bornemann, P.B., Galvanetto, U.,External forcing terms in energy-conserving based time integration algorithms 118
Borri, C, Costa, C,Quasi-steady analysis of a two-dimensional bridge deck element 122
Borri, M., Trainelli, L., Croce, A.,An index reduction method in holonomic system dynamics 126
Borri-Brunetto, M., Chiaia, B.,Multiscale numerical simulation of rock slope instabilities 131
Boubakar, M.L., Lexcellent, C, Valoroso, N., Vieille, B.,RL models of pseudoelasticity for SMAs at finite strains. Formulation and implementation 136
Boucard, P.-A., Derumaux, M., Ladeveze, P., Roux, Ph.,Macro-meso models for joint submitted to pyrotechnic shock 139
Brank, B., Ibrahimbegovic, A., Korelc, J.,On dynamics and large strain analysis of shells 143
Brockmann, T.H., Lammering, R.,Finite beam elements for rotating piezoelectric fiber composite structures 145
Bueno, E.M.R., Bucalem, M.L., Furukawa, C.H., Zabeu, C.B., Lopez, L.M.V.,Thermo-elasto-plastic finite element modeling of an Otto four-stroke engine piston for consecutive load cycles . . 149
Bull, J. W.,Displacement and fatigue effects of a void under a cement concrete runway 154
Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics xv
Buttlar, W.G., Paulino, G.H., Song, S.H.,Application of graded finite elements for asphalt pavement analysis 157
Cacciola, P., Impollonia, N., Muscolino, G,A reanalysis technique for structures under white noise excitation 162
Chakraborty, A., Gopalakrishnan, S.,A spectrally formulated finite element for analysis of wave propagation in layered composite media 166
Chambert, J., Pernin, N., Lemiale, V, Picart, P.,Micromechanical nonlocal damage modeling 172
Chan, S.H., Phoon, K.K., Lee, F.H.,Large-scale finite element analyses of intersecting tunnels using PCs 176
Chapelle, D., Ferent, A.,Reliability considerations for 3D-shell elements 181
Chen, Y.F.,Prediction of lateral distribution of vehicular live loads on bridge girders by the refined analysis method 185
Chou, C.C., McDaniel, C.C., Vang, CM., Seible, F,Numerical and experimental investigation of steel structural component of the new San Francisco-Oakland BayBridge 192
Cirak, E, West, -A/., Mauch, S., Radovitzky, R.,Parallel finite element computation of contact-impact problems with large deformations 197
Colliat, J.B., Ibrahimbegovic, A., Davenne, L.,Modeling thermomechanical behaviour of cellular structure made of brittle material 200
Combescure, A., Delcroix, F, Caplain, L., Espanol, S., Langrand, B.,A "global" finite element model for the simulation of failure of spot welded assemblies during impact 203
Consolazio, G.R., Cowan, D.R., Lehr, G.B.,Prediction of lateral impact loads imparted to bridge piers during barge collision events 207
Dameron, R.A., Parker, D.R., Dahlgren, T,Nonlinear time history analysis for the seismic retrofit of the Richmond-San Rafael Bridge 212
Danielson, K.T., Akers, S.A., Adley, M.D.,Parallel computation methods for large-scale nonlinear CSM 217
Dazio, A., Hines, EM., Parker, D., Seible, F,Numerical and experimental investigation of reinforced concrete key structural components of the new SanFrancisco-Oakland Bay Bridge 221
Delaplace, A., Ibrahimbegovic, A.,Discrete analysis of the dynamic behavior of heterogeneous material 225
Dessouky, S., Masad, E., Zbib, H, Little, D.,Gradient elasticity finite element model for the microstructure analysis of asphaltic materials 228
Doherty, J.P., Deeks, A.J.,An efficient method for elasto-static analysis of rigid circular footings 234
Duster, A., Hartmann, S.,High order anisotropic finite elements for three-dimensional isotropic hyperelastic continua 238
Eamon, CD., Baylot, J.T., O'Daniel, J.L.,Expedient FE analysis of concrete masonry walls subjected to blast loads 242
Eidel, B., Gruttmann, F,On the theory and numerics of orthotropic elastoplasticity at finite plastic strains 246
Elliott, B., Petrinic, N., Wang, L,Identification of parameters for a rate and temperature-dependent constitutive model 249
Felippa, C.A.,A distortion-insensitive four-noded membrane quadrilateral that passes the patch test 254
xvi Contents Volume I /Second MIT Conference on Computational Fluid and Solid Mechanics
Figiel, L., Kaminski, M.,Computational fatigue crack growth analysis in layered composites 258
Filice, L., Fratini, L., Micari, F.,Enhancing formability of aluminium alloys by superimposing hydrostatic pressure 261
Formosa, F., Abou-Kandil, H., Reynier, M.,Smart structures models updating 265
Fourment, L., Barboza, J., Popa, S.,Master/slave algorithm for contact between deformable bodies and axial symmetries — application to 3D metalforging 269
Fragakis, K, Papadrakakis, M.,A primal class of FETI methods applied to multiple right-hand side problems and implicit dynamic analysis instructural mechanics 273
Francois, M., Royer Carfagni, G,Damage mechanics model based on structured deformations 277
Furukawa, T., Yoshimura, S., Hoffman, M.,Implicit material modeling for temperature-dependent viscoplasticity using multi-layer neural networks 280
Gallego, R., Comino, L., Ruiz-Cabello, A.,Material constant sensitivity boundary integral equation for anisotropic solids 284
Gentilini, C, Nascimbene, R., Ubertini, F,Towards an alternative approach to geometrical modelling of shell surfaces using a parametric representation . . . 288
Goh, A.T.C, Chua, C.G.,Quantifying uncertainty in predictions using a Bayesian neural network 292
Grychanyuk, V, Tsukrov, I.,Elastoplastic behavior of two-dimensional solids with mixed-mode cracks 295
Gunnion, A.J., Scott, M.L., Thomson, R.S.,Voxel modelling of 3D through-thickness reinforced composite laminates 299
Guo, Y.Q., Li, Y.M., Gati, W., Naceur, H.,Sheet forming modeling by inverse approach and pseudo inverse approach with damage effects 304
Hadjesfandiari, A.R., Dargush, G.F.,Weighted traction boundary element methods for strength analysis of bi-materials 308
Hall, R.L., Bay lot, J.T.,Overview of computational structural mechanics in the Department of Defense 313
Hartmann, S.,On displacement control within the DIRK/MLNA approach in non-linear finite element analysis 316
Heninger, R.B., Larsen, R.C, Simmons, R.R.,S e i s m i c r e t r o f i t s t r a t e g y , d e s i g n , a n d c o n s t r u c t i o n o f t h e S a n F r a n c i s c o - O a k l a n d B a y B r i d g e W e s t C r o s s i n g . . . . 3 2 0
Hsieh, Y.-M., Whittle, A.J.,A computational strategy for solving three-dimensional tunnel excavation problems 324
Hyca, M.,Generalized lateral bending analysis of thin-walled beams with branched cross-sections 329
Ibrahimbegovic, A., Markovic, D., Brancherie, D.,Micro-macro modeling of inelastic behavior of heterogeneous structures 333
Imbsen, R.A., Sarraf, M.,Seismic response analysis of long-span bridges using nonlinear dynamic analysis techniques 337
Ingham, T.J.,Nonlinear time history analysis of the Million Dollar Bridge 343
Javadi, A.A., Tan, T.P., Zhang, M.,An intelligent finite element method for analysis of geotechnical problems 347
Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics xvii
Joanni, A.E., Kausel, E.,Diffusion in cylindrically layered materials using the thin-layer method 351
Jim, D., Petryna, Y., Bockhold, J., Stangenberg, F,A rational framework for damage analyses of concrete shells 356
Kaminski, M., Pawlik, M.,Transient heat transfer in layered composites with random geometry 360
Kanapady, R., Sandhu, S.S., Tamma, K.K.,A p r i m a l - d u a l c o n s t r a i n t a n d o r d e r p r e s e r v i n g t e c h n i q u e f o r f l e x i b l e m u l t i b o d y d y n a m i c a l i n d e x - 3 s y s t e m s . . . . 3 6 4
Kapuria, S., Dumir, P.C, Ahmed, A.,Assessment of a layerwise theory of hybrid beams for patch load 370
Karabalis, D.L., Stathopoulos, N.D.,3D prestressed ring joints subjected to bending loads 374
Karihaloo, B.L., Xiao, Q.Z., Liu, X.Y.,Direct determination of SIF and coefficients of higher order terms of mixed mode cracks 378
Kim, J.-H, Paulino, G.H.,Stress intensity factors and T-stress in functionally graded materials: a unified approach using the interactionintegral method 381
Klinkel, S., Sansour, C, Wagner, W.,An anisotropic finite elastic-plastic model for fiber-matrix materials 387
Kogl, M., Bucalem, M.L.,Locking-free piezoelectric MITC shell elements 392
Kolk, K., Kuhn, G,Acceleration of 3D crack growth simulations by the compression of BEM matrices via multipole methods 396
Kompis, V,Computational models using Trefftz functions 400
Krasowsky, A.A., Riedel, H., Schmitt, W, Benevolenski, O.I.,Spring-back simulation based on characterization of sheet metals under reverse plastic strains 403
Kratzig, W.B.,On classical shell theories, degenerated and solid shell concepts and layered models: comparison and overview . . 407
Labbe, F, Donoso, J.R.,Modeling of a 3D shallow surface crack in a nuclear pressure pipe by a three-term asymptotic solution: J-A2
methodology 411
Lemonis, M.E., Gantes, C.J.,Numerical analysis of simple and preloaded T-stub steel connections 414
Liu, G.R., Han, X.,Recent progress on computational inverse techniques in non-destructive evaluation 418
Loblein, J., Schroder, J.,Numerical aspects of a triangular finite element with an embedded discontinuity 422
Mariani, C, Venini, P., Nascimbene, R.,Neural networks in computational damage mechanics 426
Mariano, P.M., Stazi, F.L.,Linear elastic fullerene-based composites with random properties 429
Meggiolaro, M.A., Miranda, A.C.O., Castro, J.T.P., Martha, L.F.,Numerical prediction of the propagation of branched fatigue cracks 432
Mejak, G.,Elasto-plastic torsion of composite bars with imperfect bonding 436
Melerski, E.S.,Flexural analysis of concrete retaining walls on rough elastic half-space 439
xviii Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics
Meliani, S., Panasenko, G, Paoli, L.,Theoretical and numerical study of a multi-scale model for composites 443
Messerklinger, S., Springman, S.M.,Modelling the anisotropy of soft Swiss lacustrine clay 447
Mestrovic, M.,Generalized differential quadrature method for Timoshenko beam 451
Miller, R.E., Shilkrot, L, Curtin, W.A.,A study of nano-indentation using coupled atomistic and discrete dislocation (CADD) modeling 455
Miranda, A.C.O., Meggiolaro, M.A., Castro, J.T.P., Martha, L.F.,Finite element modeling of fatigue crack bifurcation 460
Mistakidis, E.S.,Ultimate compressive strength of CHS members with flattened edges 464
Miyamura, T, Makinouchi, A.,Application of the conjugate projected gradient method to large-scale contact problems 469
Mochnacki, B., Majchrzak, E.,Sensitivity analysis of solidification process using the boundary element method (the micro-macro approach) . . . 473
Mohanty, P., Rixen, D.J.,Operational dynamic testing in the presence of harmonic excitation 477
Moldovan, D., Haslam, A.J., Wolf, D.,Multiscale simulation of grain growth in nanocrystalline materials 482
Moller, S.C., Vermeer, P.A., Bonnier, P.G.,A fast 3D tunnel analysis 486
Momoh, R., Antony, S.J., Kuhn, M.R.,Effect of grain shape on the shear deformation characteristics of granular media 490
Montdns, F.J., Bathe, K.J.,On the stress integration in large strain elasto-plasticity 494
Mori, K., Patwari, A.U., Maki, S.,Finite element simulation of hammering hydroforming of tubes 498
Mori, K., Yoshimura, H., Otomo, Y,Parallel processing for 3D rigid-plastic finite element method using diagonal matrix 502
Nagai, M., Iwasaki, E., Nogami, K.,E f f e c t o f i n e l a s t i c b e h a v i o r o f c a b l e s o n u l t i m a t e b e h a v i o r a n d s t r e n g t h o f a 6 0 0 - m s t e e l c a b l e - s t a y e d b r i d g e . . . . 5 0 6
Nakagiri, S., Hoshi, Y, Yamada, T,Interval estimation of time-history response without use of direct time integration 509
Nawrat, A., Skorek, J.,Novel approach for identification of the thermal resistance of the gas-gap between the ingot and mould in thecontinuous casting of metals 513
Nguyen, B.N., Khaleel, M.A.,Prediction of damage in a randomly oriented short-fiber composite plate containing a central hole 519
Niggl, A., Diister, A., Rank, E.,Coupling ID and 2D elasticity problems by using the /ip-rf-version of the finite element method 523
Noels, L, Stainier, L, Ponthot, J.-P, Bonini, J.,A new formulation of internal forces for non-linear hypoelastic constitutive models verifying conservation laws . 527
Novak, M.E., Birgisson, B., McVay, M.,Effects of vehicle speed and permeability on pore pressures in hot-mix asphalt pavements 532
O'Daniel, J.L.,Modeling contact detonations with ALE3D and PARADYN 537
Contents Volume I /Second MIT Conference on Computational Fluid and Solid Mechanics xix
Of, G,A fast multipole boundary element method for the symmetric boundary integral formulation in linear elastostatics 540
Papados, P.P.,Simulation of projectile impact on the composite armored vehicle 544
Papanikolas, P.,The Rion-Antirion multispan cable-stayed bridge 548
Pardoen, T,Current challenges in the transfer to metal forming of top-down approaches to ductile fracture 553
Park, J, Kausel, E.,Numerical dispersion of SH waves in the thin-layer method 556
Peerlings, R.H.J., Engelen, R.A.B., Mediavilla, J, Geers, M.G.D.,A gradient-enhanced plasticity-damage approach towards modelling of forming processes 561
Pellicano, F., Amabili, M.,Nonlinear dynamics and stability of compressed circular cylindrical shells 565
Pfeiffer, f:G.,On unilateral roller coasters 569
Phoon, K.K., Toh, K.C, Chan, S.H., Lee, F.H.,A generalised Jacobi preconditioner for finite element solution of large-scale consolidation problems 573
Pichler, Ch., Lackner, R., Mang, H.A.,Continuum-micromechanics approach for determination of frost heave in artificial ground freezing 578
Piltner, R.,Solution representations for Trefftz-type plate bending elements 582
Poizat, Ch., Campagne, L., Daridon, L., Husson, Ch., Merle, L., Ahzi, S.,Modelling and simulation of thin sheet blanking 586
Popov, A.A.,The application of spring pendulum analogies to the understanding of nonlinear shell vibration 590
Puzrin, A.M., Randolph, M.F,Recent advances in the upper bound limit analysis of Tresca's material 595
Raman, A., Hansen, M.H., Mote Jr., CD.,Post-flutter dynamics of a rotating disk 598
Reese, S.,On a new reduced integration technology for thin structures in finite inelasticity 602
Riou, H., Ladeveze, P., Rouch, P.,The variational theory of complex rays for medium-frequency vibrations of shells 605
Saanouni, K., Belamri, N., Khelifa, M., Badreddine, H., Cherouat, A.,Finite anisotropic plastic flow with ductile damage for sheet metal forming simulation 611
Sadowski, T, Samborski, S.,On the different behaviour of porous ceramic polycrystalline materials under tension and compression stress state 615
Sagaseta, C, Houlsby, G.T., Burd, H.J.,Quasi-static undrained expansion of a cylindrical cavity in clay in the presence of shaft friction and anisotropicinitial stresses 619
Sapountzakis, E.J., Mokos, V.G.,Warping shear stresses in nonuniform torsion in bridge decks of materials in contact by BEM 623
Schenk, O., Selig, M.,Advancing crash forming analysis capabilities through solver technology 628
Schiltt, J., Wagner, W.,A 3D-plasticity model for the description of concrete and its 3D-FE implementation 632
xx Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics
Severino, E., El-Tawil, S.,Collision of vehicles with bridge piers 637
Silling, S.A.,Dynamic fracture modeling with a meshfree peridynamic code 641
Smojver, I., Soric, J.,On damage modelling of laminated composite shells subjected to low velocity impact 645
Song, C,Dynamic stiffness of foundations embedded in anisotropic half spaces 648
Stefanou, G, Papadrakakis, M.,Finite element analysis of shells with multiple random material and geometric properties 652
Stiavnicky, M., Kompis, V,Rigid inclusions solved using non-singular reciprocity based BEM 656
Stumpf, H., Makowski, J., Gorski, J., Hackl, K.,Gradient theories of ductile and brittle damage: a thermodynamical consistent framework and computationalissues 659
Su, R.K.L., Sun, H.Y., Leung, A.Y.T.,Determination of crack tip asymptotic stress field by fractal finite element method 662
Szopa, R., Mochnacki, B.,The sensitivity of continuous casting solidification with respect to boundary conditions 666
Szybinski, B., Karas, M., Zieliiiski, A.P.,Thin-walled spatial structures optimized using Trefftz-type finite elements 670
Taiebat, H.A., Carter, J.P.,Contact between soil and circular foundations under eccentric loading 674
Tan, X.G., Vu-Quoc, L,Nonlinear numerical dissipative elastodynamics of an optimal solid shell element 678
Thuramalla, N.V., Khraisheh, M.K.,Effects of microstructural evolution on the stability of superplastic deformation 683
Tijssens, M.G.A., James, R.D.,Towards a continuum theory for phase transformations using atomistic calculations 687
Toma, M., Kompis, V,Use of Trefftz functions in modelling of point and line contact 690
Tong, W., Zhang, N, Xie, C,A kinematics perspective on the micro-to-macro transition in anisotropic plasticity modeling of polycrystallinesolids 693
Toscano, R.G., Gonzalez, M., Dvorkin, E.N.,Experimental validation of a finite element model that simulates the collapse and post-collapse behavior of steelpipes 696
Touze, C, Thomas, O., Chaigne, A.,Non-linear oscillations of continuous systems with quadratic and cubic non-linearities using non-linear normalmodes 701
Tsepoura, K.G, Papargyri-Beskou, S., Polyzos, D., Beskos, D.E.,Static analysis of 3-D gradient elastic solids by BEM 705
Uetsuji, Y, Nakamura, Y., Veda, S., Nakamachi, E.,Multi-scale finite element analysis of piezoelectric materials based on crystallographic homogenization method . . 709
van Dommelen, J.A.W., Brekelmans, W.A.M., Baaijens, F.P.T.,Multiscale modeling of particle-modified semicrystalline polymers 713
Veneziano, D.,Linear elasticity with isotropic lognormal Young's modulus: localization of stresses and strains and effectivestiffness tensor 718
Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics xxi
Villa, A., De Masi, B., Corigliano, A., Frangi, A., Comi, C,Mechanical characterization of epitaxial polysilicon in MEMS 722
Vonach, W.K., Rammerstorfer, EG.,Face layer wrinkling in sandwich shells of general configuration 727
Wang, H., Yao, Z,Simulation of 2D elastic solid with large number of inclusions using fast multipole BEM 732
Waszczyszyn, Z, Ziemianski, L.,Neurocomputing and experimental structural mechanics: some new results 737
Watson, J.O.,Boundary element computation of crack root stress fields in three dimensions 742
Wijerathne, M.L.L., Oguni, K., Hori, M.,3D stress field tomography based on photoelasticity 746
Wiltafsky, C, Koskinen, M., Schweiger, HE,An advanced constitutive model for normally consolidated clays based on multilaminate framework 751
Wolfe, R.W., Farran, H.J., Heninger, R.B.,A dynamic analysis of cable vibration control on cable-stayed bridges 755
Wroblewski, A., Zielinski, A.P.,Survey and applications of special purpose T-complete systems 759
Xiao, Z.M., Zhao, J.F.,Electro-elastic stress analysis for a Zener-Stroh crack at the interface of a piezoelectric material bonding to ametal 762
Xing, H.L., Mora, P., Makinouche, A.,Finite element modeling of nonlinear frictional instability between deformable bodies 766
Yamada, S., Vchiyama, M.,Simulation of buckling tests using a mixed FEM for pressurized shallow spherical shells and the reduced stiffnessanalysis 770
Yan, L, Khraishi, T.A., Shen, Y.-L, Horstemeyer, M.F.,A numerical method for the treatment of image stresses in dislocation dynamics simulations 776
Yasumitsu, R., Natori, M.C., Nishinari, K.,Dynamical analysis of a thin flexible rod with both bending and torsional effects 780
Zastrau, B., Schlebusch, R., Matheas, J.,Special aspects of surface-related shell theories with application to contact problems 787
Zhou, X., Tamma, K.K., Sha, D.,A forward incremental displacement semi-explicit unconditionally stable dynamic frictional contact-impactformulation 791
Zhu, T, Li, J., Van Vliet, K.J., Yip, S., Suresh, S.,Simulation of nanoindentation via interatomic potential finite element method 795
Zhu, Z.H., Meguid, S.A., Ong, L.S.,Dynamic multiscale simulation of towed cable and body 800
Zimmerman, J.A., Webb III, E.B., Hoyt, J.J., Jones, R.E., Klein, P.A., Bammann, D.J.,Evaluation of continuum stress in atomistic simulation 804
Fluids
Abdelfattah, A., Durst, B., Huebner, W., Kern, W.,Fuel-stratification in automotive engines with vortical flow structures: an engineering approach with numericaland experimental methods 810
xxii Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics
Aboubacar, M., Tamaddon-Jahromi, H.R., Webster, M.F.,Time-dependent algorithms for viscoelastic flow: bridge between finite-volume and finite-element methodology . 815
Al-Mdallal, Q., Kocabiyik, S.,Flow induced by superposed oscillations of a circular cylinder 819
Albukrek, CM., Batishcheva, A., Ghoniem, A.,Parallel fast solver based on the vortex element method 822
Alves, M.A., Oliveira, P.J., Pinho, FT.,Numerical simulation of viscoelastic contraction flows 826
Ayyalasomayajula, H., Kumar Mutnuri, P., Ghia, K, Ghia, V.,Analysis of higher-order compact differencing scheme by studying flow past a circular cylinder 830
Baker, A.J., Kolesnikov, A.,High-order stabilization for Navier-Stokes CFD algorithms 834
Barry, KM., Mehta, A.J.,Quasi-hydrodynamic lubrication effect of clay particles on sand bed erosion 837
Benim, A.C., Cagan, M.,Investigation into the fluid dynamics of a droplet in gas flow 840
Bertrand, F., Giguere, R., Tanguy, P.A.,Recent progress on the modeling of complex flows in twin-screw extrusion 843
Blackmore, D., Ting, L.,Vorticity jumps across shock surfaces 847
Bogaerds, A.C.B., Hulsen, M., Peters, G., Baaijens, F.P.T.,The elastic instability of fountain flows 850
Bottasso, C.L., Detomi, D.,Plain Galerkin schemes that work well for the advection-diffusion problem 853
Breuer, M., Jovicic, N.,Vortex formation and shedding from an airfoil at high angle of attack: a numerical study 858
Carregal Ferreira, J., Bender, R., Forkel, H.,A presumed PDF-ILDM model for the CFD-analysis of turbulent combustion 862
Carretero, J.A., Martinez-Sanchez, M.,Numerical simulation of a single-emitter colloidal jet 866
Cheng, W, Wanzhi, W., Shourong, Y,Algorithm study on interface tracking in Eulerian code 869
Cueto-Felgueroso, L., Colominas, I., Mosqueira, G, Navarrina, F., Casteleiro, M.,An MLSPH algorithm for free surface flows in engineering applications 873
Dabrowski, T, Hartnett, M.t Berry, A.,Modelling hydrodynamics of Irish Sea 877
Dargush, G.F., Grigoriev, MM.,Boundary element methods for highly convective unsteady flows 882
Dawson, C, Pothina, D., Proft, J.,Shallow water modeling using discontinuous and coupled finite element methods 886
De, S., Sengupta, T.K.,Proper orthogonal decomposition of by-pass transition data 889
Epstein, B., Peigin, S.,Application of WENO (weighted essentially non-oscillatory) method to computational aerodynamics 893
Ganeriwal, G., Sengupta, T.K.,High accuracy compact schemes and Gibbs' phenomenon 898
Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics xxiii
Gamier, F, Ferreira Gago, C,A p p l i c a t i o n o f c o m p a c t finite-difference m e t h o d s t o n u m e r i c a l s i m u l a t i o n o f a n o n - i s o t h e r m a l t u r b u l e n t j e t . . . . 9 0 4
George, E., Glimm, J., Li, X., Xu, Z.,Simulation of fluid mixing in acceleration driven instabilities 908
Glimm, J., Li, X., Kim, M.-N, Oh, W, Marchese, A., Samulyak, R., Tzanos, C,Jet breakup and spray formation in a diesel engine 912
Gravemeier, V, Wall, W.A., Ramm, E.,Numerical solution of the incompressible Navier-Stokes equations by a three-level finite element method 915
Greif, D., Wiesler, B., Alajbegovic, A.,Two-phase tank filling simulations of an automobile tank system 919
Grillet, A.M., Bogaerds, A.C.B., Baaijens, F.P.T.,The importance of assessing the stability predictions of polymer melt constitutive equations 923
Hardt, S.,Modeling hydrodynamic focusing of liquid jets in microchannels 927
Hemlund, J.W., Tackley, P.J.,Three-dimensional spherical shell convection at infinite Prandtl number using the 'cubed sphere' method 931
Iafrati, A., Campana, E.F.,Surface ripples generated by spilling breakers 934
Ismail-Zadeh, A.T., Korotkii, A.I., Tsepelev, I.A.,Numerical approach to solving problems of slow viscous flow backwards in time 938
Jinnah, M.A., Takayama, K.,N u m e r i c a l s i m u l a t i o n o f s t r e n g t h o f t u r b u l e n c e e f f e c t o n n o r m a l s h o c k / h o m o g e n e o u s t u r b u l e n c e i n t e r a c t i o n . . . . 9 4 2
Kanarska, Yu.,A three-dimensional non-hydrostatic numerical model of free-surface stratified flows 946
Kendon, T.E., Sherwin, S.J., Graham, J.M.R.,An irrotational/vortical split-flow approach to viscous free surface flow 950
Kennedy, A.B., Shi, F, Kirby, J.T.,Time-dependent wave forcing in computational nearshore hydrodynamics 956
King, J.N., Sheng, Y.P.,A comparison of advection schemes in variable-density, highly conductive, ground water domains 961
Kleine Jdger, F, Kohne, H,CFD modelling in process burner development: combustion of light residual fuel oils 966
Knio, O., Ting, L, Klein, R.,Theory of slender compressible vortex filaments 971
Kokh, A.E., Mironova, L.A., Popov, V.N.,Numerical modeling of incompressible viscous flows: single crystal growth through the heat field rotation method 974
Kraginsky, L.M., Oparin, A.M.,Parallel framework for numerical modeling of the problems described by hyperbolic equations with applicationsin atmosphere flows modeling 978
Krause, E.,Axial flow in slender vortices 984
Leithner, R., Mutter, H.,CFD studies for boilers 988
Lepot, I., Vigneron, D., Essers, J.-A., Leonard, O.,Implicit high-order geometrically conservative scheme for the solution of flow problems on moving unstructuredgrids 992
Lin, P.,Regularization formulations and explicit temporal discretization for the incompressible Navier-Stokes equations . 997
xxiv Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics
Liu, H,Approximation of singular concentration in compressible flows 1001
Livermore, P., Jackson, A.,The growth of magnetic field energy in conducting fluids 1004
Ma, T., Wang, S.,Rigorous characterization of boundary layer separations 1008
Malidi, A., Dufour, S.,A numerical strategy for accurate free surface capturing 1011
Marshall, J.S.,Toward an arbitrary Lagrangian-Eulerian vorticity transport method 1016
Marzouk, Y.M., Ghoniem, A.F.,Vorticity generation mechanisms and correct boundary conditions for transverse jet simulation 1020
Mclnnes, L., Norris, B., Bhowmick, S., Raghavan, P.,Adaptive sparse linear solvers for implicit CFD using Newton-Krylov algorithms 1024
Mihalffy, P., Steinberger, B.,Two models in one: mantle flow modeling on different scales beneath the North Atlantic 1029
Moraga, F.J., Larreteguy, A.E., Drew, D.A., Lahey Jr., R.T.,The modeling of bubbly flows around naval surface ships at high Reynolds numbers 1034
Morgan, PL, Armfield, S.W.,Buoyant horizontal jets in a stratified medium 1037
Mueller, C,CFD based prediction of a turbulent nonpremixed methane flame using a conditional moment closure approach . . 1040
Miihlhaus, H.-B., Moresi, L., Cada, M.,Anisotropy model for mantle convection 1044
Naitoh, K., Kuwahara, K., Krause, E.,Cycle-resolved computations of compressible vortical flows in automotive engines 1047
Nikfetrat, K,Numerical simulation of flow in square ducts joined with a mitered 90° elbow 1051
Nilsson, J., Gustafsson, B., Lotstedt, P., Brtiger, A.,High order difference method on staggered, curvilinear grids for the incompressible Navier-Stokes equations . . . 1057
Nitsche, M., Taylor, M.A., Krasny, R.,Comparison of regularizations of vortex sheet motion 1062
Nojima, K., Kawahara, M.,An analysis of wind environment around buildings with unstructured mesh generation technique 1066
Ogami, Y.,Study of LES model for the vortex method 1072
Olshanskii, M.A.,Preconditioned iterations for the linearized Navier-Stokes system in rotation form 1074
Papaspyrou, S., Valougeorgis, D., Karamanos, S.A.,Longitudinal sloshing effects in half full horizontal cylindrical vessels 1078
Pedro, G., Suleman, A., Djilali, N.,Numerical study of a pitching and heaving hydrofoil 1083
Petre, C.F., Larachi, F., Iliuta, I., Grandjean, B.,Tailoring the pressure drop of structured packings through CFD simulations 1087
Pirozzoli, S.,Upwind weighted compact schemes for advection equations 1092
Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics xxv
Pitsch, H., Duchamp de Lageneste, L.,Large-eddy simulation of premixed turbulent combustion 1096
Remade, J.-F,Transient adaptive discontinuous Galerkin method with anisotropic meshes 1100
Riabov, V.V.,Applications of exponential box schemes for viscous flows with combustion and blowing 1102
Riccardi, G., Iafrati, A.,Vortex shedding due to water impact of an asymmetric wedge 1106
Rubinstein, R.,A statistical model of laminar-turbulent transition 1109
Schneider, S.,Fast multipole method for acoustic radiation problems in three dimensions 1112
Schotzau, D.,Local discontinuous Galerkin methods for incompressible flow 1116
Sengupta, T.K., Anuradha G, De, S.,Navier-Stokes solution by new compact schemes for incompressible flow 1119
Serre, E., Schafer, M., Bontoux, P.,Vortex breakdown in a cylinder with a free surface 1125
Seveno, D., Martic, G, Gentner, F, Voue, M., De Coninck, J.,Microfluidics and wetting: evidence of several time scales 1128
Shi, X., Khodadadi, J.M.,T r a n s i e n t e v o l u t i o n t o p e r i o d i c fluid flow a n d h e a t t r a n s f e r i n a l i d - d r i v e n c a v i t y d u e t o a n o s c i l l a t i n g t h i n fin . . . 1 1 3 1
Sibilla, S., Beretta, C.P.,Near-wall coherent structures in the turbulent channel flow of a dilute polymer solution 1135
Smirnov, S., Ramboer, J., Lacor, C,Finite volume formulation of compact upwind and central schemes with artificial selective damping 1140
Tadjfar, M.,Influence of bifurcation angle on flow into a branch 1144
Tai, CH, Zhao, Y, Liew, KM.,Parallel computation of unsteady three-dimensional incompressible viscous flow using an unstructured multi-grid method 1148
Tanner, R.I., Xue, S.-C,Computing transient viscoelastic flows 1153
Thomer, O., Klaas, M., Schroeder, W, Krause, E.,Oblique shock-vortex interaction over a wedge 1156
Tiwari, P., Antal, S.P., Podowski, M.Z.,On the modeling of dispersed particulate flows using a multifield model 1160
Tryggvason, G., Fernandez, A., Lu, J.,The effect of electrostatic forces on droplet suspensions 1166
Tsepelev, LA., Korotkii, A.I., Ismail-Zadeh, A.T.,Numerical approach to 3D forward modeling of slow viscous flow 1169
Uhlman, J.S.,Calculation of the sound generated by the head-on collision of two vortex rings 1172
Vjang, P.M.,A three-dimensional study of Taylor bubble turning in two phase downflow 1176
van der Yen, H., van der Vegt, J.J.W., Bouwman, E.G.,Space-time discontinuous Galerkin finite element method for inviscid gas dynamics 1181
xxvi Contents Volume 1 /Second MIT Conference on Computational Fluid and Solid Mechanics
Volkov, KM,Large eddy simulation of non-isothermal turbulent gas-particle jets 1185
Wagner, S.N., Kessler, M., Pomin, H.,Vortical flow phenomena on helicopter rotors 1189
Wang, Z.J.,The spectral volume method for the Euler equations with high-order boundary representations 1193
Wetland, C,Vortex phenomena in flows for reusable launch vehicles 1197
Xu, K.,Kinematic and dynamic dissipation in shock capturing schemes 1201
Yi, T, Wee, D., Annaswamy, A., Ghoniem, A.F.,Self-sustained oscillations in separating flows: simulation and stability analysis 1205
Zhang, J., Sun, H.,A sixth order finite difference scheme for the convection diffusion equation 1209
Zhang, X., Blaisdell, G.A., Lyrintzis, A.S.,High-order compact schemes with filters on multi-block domains 1212
Zhang, Y.-T, Shi, J., Shu, C.-W, Zhou, Y.,Resolution of high order WENO schemes and Navier-Stokes simulation of the Rayleigh-Taylor instabilityproblem 1216