Comprehending Cut Levels - Magid Glove & SafetyComprehending Cut Levels In 2013 there were 186,830...
Transcript of Comprehending Cut Levels - Magid Glove & SafetyComprehending Cut Levels In 2013 there were 186,830...
Understand what ANSI cut levels mean and the materials that can be used to protect you.
Consider Material
Comprehending Cut Levels
In 2013 there were 186,830 occupational injuries to hands and wrists that involved days away from work.
High Performance Polyethylene (HPPE)
• Pound-for-pound 15 times stronger than steel
• Low-linting and resistant to chemicals, water and ultraviolet light
• Soft material offers superior comfort
Magid XKS® Yarn
• Proprietary engineered blend of stainless steel wire, para-aramid and high-performance fibers
• Delivers up to twice the cut protection of 100% aramid or HPPE materials of a similar weight
• Dark coloration extends service life 3X times longer than other gloves
• Touchscreen compatible
Para-Aramid/Aramid
• Pound-for-pound 5 times stronger than steel
• Lightweight material for superior dexterity
• Inherent flame, heat and cut resistance
• DuPont® Kevlar® is a popular para-aramid synthetic fiber
Magid Aramax® and Aramax XT Yarn
• Proprietary engineered blend of para-aramid, fiberglass and synthetic fibers
• Delivers up to twice the cut and abrasion resistance of 100% aramid or HPPE materials of a similar weight
• Draws sweat and heat away from skin, keeping hands dry, cool and comfortable
There are 5 cut protection performance levels and it is important to use the right cut protection for your application.
ANSI Performance
Level
Weight Needed to Cut Material
(Grams)
0 < 200
1 > 200
2 > 500
3 > 1000
4 > 1500
5 > 3500
Levels are measured by the grams of force required for failure to occur when applied by a standard cutting blade traveling 25mm. Higher levels provide more protection. These performance ratings are classified as ANSI/ISEA 105-2005 from a 0-5 level based on the outcome of the Cut Performance Test (CPPT).
For more on ANSI and EN standards visit: http://bit.ly/1y9kc2W
Cut Protection Guide
Heavy weight Light weight
7 gauge 18 gauge
Lower Gauge Heavier Weight
• Thicker construction• Less dexterity
7Gaug
e
1810 13 15
Higher Gauge Lighter Weight
• Thinner construction• Improved dexterity
Consider Gauge and WeightMachine knits can vary in density. In the glove industry, the number of rows or density of the knitting rows, is called the “Gauge” of the glove.
Item #GP100 Item #KEV4326 Item #GPD583 Item #AX300HV Item #GPD800
ANSI
Cut
1ANSI
Cut
2ANSI
Cut
3ANSI
Cut
4ANSI
Cut
5
Protect Your Hands from Injury
70% of all work-related hand injuries are the direct result of workers not wearing gloves.
[email protected] in the U.S.A. ©2014 Magid Glove & Safety Mfg. Co. LLC. All Rights Reserved. FLYCUTL Rev. 11/14
Choosing the right glove for your application(s) is about
more than just cut levels. The fit, comfort, dexterity and grip all need to be considered
when determining the proper hand protection. Ap
plic
ation
s Gui
de ANSI Cut Level 1 Gloves Assembly, Maintenance, Material Handling and Shipping & Receiving
ANSI Cut Level 2 & 3 Gloves Assembly, Appliance Manufacturing, Automotive, Construction Maintenance, Material Handling and Metal Handling
ANSI Cut Level 4 & 5 Gloves Appliance Manufacturing, Automotive, Construction, Glass Handling, Machining, Metal Handling, Metal Stamping and Paper Production
Consider Coatings
Polyurethane — Most popular and offers best dexterity and tactile sensitivity
Nitrile — Offers best abrasion and puncture resistance
Latex — Provides best overall grip
Polyvinyl Chloride (PVC) — Great abrasion protection, retains flexibility in the cold