COMPONENTS AND ACCESSORIES FOR THE AIR … ?????.pdf · Return air grilles Ceiling diffusers...

COMPONENTS AND ACCESSORIES FOR THE AIR DIFFUSION,

DISTRIBUTION AND REGULATION

Dampers and operation kits Zone control system Supply air grilles

Return air grilles Ceiling diffusers Adapters Y elbow Duct manifolds

Company OverviewFounded in 1989, Twitoplast is a privately owned company focusing on the development and manufacture of plastic accessories, primari ly for the air condit ioning market.

With a sol id proven achievement on saving an average of 45% on the instal lat ion t ime, together with a superior qual ity and excel lent service, Twitoplast has successful ly turned to be global an is now operating in 33 countries worldwide.

Twitoplast’s revolutionary “Twito Quick Modular System (TQMS)” is the most effective and cost-eff icient air distr ibution system on the market today. The system includes a variety of 750 products, including connectors, y-elbows, duct manifolds, return air gri l les with & without f i l ter, plenums, proportional electr ical dampers, mult izone control system, mult iple cei l ing diffusers, supply gri l les and f lexible ducts. Twitoplast’s products are registered patents in several countries, and manufactured from non-toxic plastic and withstand even under harsh environmental condit ions. Twitoplast currently offers 8 groups of products, each complementary to the other.

INDEX

DAMPERS AND OPERATION KITS . . . . . . . . . . . . . . . . . . . . . . . . . 3

PROPORTIONAL MULTIZONE CONTROL SYSTEM UP TO 7 ZONES . . . . 9

DOUBLE DEFLECTION AIR SUPPLY GRILLES . . . . . . . . . . . . . . . . . . 13

RETURN AIR GRILLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

STRIP LINE GRILLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

LINEAR SLOT DIFFUSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

CEILING DIFFUSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ADAPTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Y elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

DUCT MANIFOLDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Special products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Our dampers are manufactured from corrosion-resistant ABS plastic. Insulating propert ies of this material prevent condensation making it ideal for use with heating/cooling air condit ioning systems (temperature range 0- 65°C / 30-140 °F).Dampers serve as airf low capacity regulators in the ducts. They control the air supply to the individual users. These dampers are of the butterf ly type and al low adjustment of 90° from ful ly open to closed posit ion. 5 control methods are avai lable:Mechanical, electr ical, thermostatic temperature control. The thermostatic method al lows to control the dampers proportional ly regarding the difference between the actual air temperature and the desired temperature.

DAMPERS AND OPERATION KITS

3

MODULAR ROUND DAMPERS

Available from diameter 4” up to 14”, the dampers are designed for the direct connection to the flexible ducts or straight to the duct manifold of the A/C unit. The dampers of 14”, 12” (8” on request) feature an oval shape. These dampers are uniquely designed and the damper shell is split into two halves which are joined together on site. These stack able dampers ship compactly- saving storage space and shipping costs. Assembly is simple: slide the web into the slot, press the halves together until they click and the damper is ready for use.

ABS modular damper diam. 100 mm (4”) DM1104ABS modular damper diam. 150 mm (6”) DM1106ABS modular damper diam. 200 mm (8”) DM1108ABS modular damper diam. 200 mm oval shape (8”) ABS modular damper diam. 250 mm (10”) DM1110ABS modular damper diam. 300 mm oval shape (12”) DM1112ABS modular damper diam. 350 mm oval shape (14”) DM1114Also available 127 mm (5”) DM1105

OPPOSED BLADE DAMPERS

Opposed blade dampers for supply air grilles.

#Code150x300 mm 12861530150x400 mm 12861540150x500 mm 12861550200x300 mm 12862030200x400 mm 12862040200x500 mm 12862050

OPERATION KIT TYPE MECHANICAL

Mechanical operation kit type Mechanical: the control box is connected with 2 m (6-8”) long brake cable to the damper. The cable operates the butterfly to desired setting (On/Off).

Oper kit Mechanical (wall) 128907Oper kit Mechanical (Box) 128908Oper kit Mechanical component ( New) 1400131

4 OPPOSED BLADE DAMPERS

Opposed blade dampers for ceiling diffusers.

#CodeO.B.D 225*225 For Ceiling Diffuser 12862222O..B.D 305*305 For Ceiling Diffuser 12863030O.B.D 385*385 For Ceiling Diffuser 12863838

moduuulalarr dadampmpeeeer diam 100 mmmmmm (44”)”) D

Box Wall

Mac. Comp

4

Box W ll

OPERATION KIT TYPE EL-WM

The kit type EL-WM: is an electrical control toggle switch system which controls a motorized proportional damper.Main characteristics:

Modern design• Can be installed as an independent unit • In any existing air conditioning system• Ergonomic and easy to operate• Easy adjusting of the airflow• Several intermediate positions that can be • Easily secured• Quick and easy installation•

Dimmer for wall mount installation, motor unit for damper, 6 m long RJ11 connection cable, installation and operation instructions.AC/DC 12V Transformator not included. Code#Operation kit Opal EL-WM 128913

UNIVERSAL REMOTE CONTROL

This nice and high tech remote control Specially disdain with transparent LCD .u can use with any kind / brands of air-conditioner ,By just pressing the SET button until the code of the A/C will flash on the LCD .The remote control is very thin and contain lithium battery .

Code #UNIVERSAL REMOTE CONTROL 11890058

OPERATION KIT TYPE EL-BM

The kit type EL-MB: is an electrical control toggle switchSystem which controls a motorized proportional damper.Main characteristics:• Modern design• Can be installed as an independent unit in any existing air conditioning system• Ergonomic and easy to operate• Easy adjusting of the airflow• Several intermediate positions that can be easily secured• Quick and easy installation

Dimmer for box mount installation, motor unit for damper, 6 m long RJ11 connection cable, installation and operation instructions.AC/DC 12V Transformator not included. Code#Operation kit Opal EL-BM 128914

5

6

OPERATION KIT TYPE MOB 128DDThe kit type MOB 128DD is an electronic control unit for a proportional Motorized Opposed Blade Damper that maintains a required room temperature. It can be installed in any existing air conditioning system. The unit is based on a micro-controller that carries out the user’s instructions. The unit provides optimum control of the desired working temperature according to the selected operation mode.Main characteristics:• Modern design• Can be installed as an independent unit in any existing air conditioning system• Ergonomic and easy to use• Cooling/Heating selector• Manual, automatic selector• Quick and easy installation

Package contentsOPAL C128DD thermostat, motor unit for damper with frame adapter for the OBD, connection RJ11 cable lg. 6 m, installation and operation instructions

OPERATION KIT TYPE OPAL MOB RC-11

The OPAL MOB RC-11 is an electronic control system which controls a proportional Motorized Opposed Blade Damper. The system is based on a IR remote control unit that sends the operations commands to a wall mount IR receiver. The receiver is based on a strong micro-controller able to display the operating mode with 5 LEDs and to carry out the operation mode logic and algorithm.Main characteristics:• Setting timer• “I feel” temperature sensor on the remote control• ID code• On/Off, sleep mode• Can be installed as an independent unit in any existing air conditioning system• Cooling/Heating selector• Manual, automatic or turbo selector• Modern design• Quick and easy installation

Package contentsRemote control type KFD, receiver type C612KFD, motor unit for damper with frame adapter for the OBD, 6 m long RJ11 connection cable, batteries for the remote control, installation and operation instructions

OPERATION KIT TYPE MOB 650DD

The kit type MOB 650DD is an electronic control unit for a proportional Motorized Opposed Blade Damper that maintains a required room temperature. It can be installed in any existing air conditioning system. The unit is based on a micro-controller that carries out the user’s instructions. The unit provides optimum control of the desired working temperatureaccording to the selected operation mode.Main characteristics:• Modern design• Display with back light• Flash mount thermostat for standard electrical box• Can be installed as an independent unit in any existing air conditioning system• Ergonomic and easy to use• Cooling/Heating selector• Manual, automatic selector• Quick and easy installation

Package contentsOPAL C650DD thermostat, motor unit for damper with frame adapter for the OBD, opposed blade damper dimensions 300x150 mm, 6 m long RJ11 connection cable, installation and operation instructions.

cckage cocontntenents

k

7

CONNECTION CABLES RJ11

RJ11 connection cables for damper operation kits.

#Code1005980400S0010 Length 4 m 1401041005980450S0010 Length 6 m 1401061005980500S0010 Length 10 m 1401101005980550S0010 Length 15 m 1401151005980550S0010 Length 20 m 140120

POWER SUPPLY TYPE C-315 FOR STAND ALONE CONFIGURATIONS

The power supply units type C-315 feature up to 4 12 V output channels for the electrical proportional dampers.Main characteristics:• Input nominal voltage 230 Vac 50-60 Hz• Non-flammable plastic ABS – V0• Motor operation voltage 12 V• Operation indication light• UL/IEC certificates

#CodePower supply output 1 channel 1400315Power supply output 2 channels 14003152Power supply output 4 channels 14003154

SPLITTER FOR RJ11 CABLES

RJ11 connection cables for damper operation kitsTo split 2 dampers with 1 operation kit.

#CodeRJ spliter (for white cabel) 140011 RJ spliter (for black cabel) 140012

CONNECTION EXAMPLES “STAND ALONE” CONFIGURATION

S p l i t e r - C o n n e c t i n g o n e thermostat or one Remote control and 2 dampers by using the RJ-11splitter.

C-3154 Power Supply box 4 channels- connecting 4 Remotecontrols or 4 thermostats through the power supply box to 4 dampers

C-3152 Power Supply box 2 channels- connecting 2 Remote controls or 2 thermostats through the power supply box to 2 dampers

C-3151 Power Supply box 1 channel-connecting Remote control or thermostat through the power supply box to the damper

8

PROPORTIONAL MULTIZONE CONTROL SYSTEM

Why zone control- ZC-207DK

• Provides room by room comfort control

• Reduces equipment run time

• Eliminates hot/cold rooms

• Works with conventional air conditioning units, fan coils and heat pumps.

• Allows you to heat or cool only the areas you want, when you want

• Saves energy and reduces utility bills up to 40%

• Up to 7 modulation rooms (zones) + proportional electrical controlled BY-PASS

• Quick and easy installation

18º

19º

22º

21º19º

21º

20º

UP TO 7 ZONES+ PROPRTIONAL BYPASS

9

PROPORTIONAL DRY CONTACT MULTIZONE ZONE SYSTEM ZC-207DK

PROPORTIONAL MULTI ZONE SYSTEM- ZC-207

The Proportional Dry Contact Multi zone System Type ZC-207DK has a dry contact controller. Designed to control up to 7 zones with round ABS dampers (diam. 4”, 6”, 8”, 10” 12” or 14” ), and By–Pass electrical proportional damper, 2 relays and communication port. The communication port allows connecting additional controller to the main one. This feature allows connecting up to 14 zones to one system. The ZC-207DK have indication panel that will display the status of system operation. It operates the air conditioning unit by two dry contacts relays and is not interfering with the air conditioning controller. The A/C will receive the command to operate or shut off according to the total system demand for cooling or heating. The controller receives operation commands from each zone and controls the air damper proportionally. The system is equipped with quick connectors to ensure convenient and quick installation of the system elements.

Package contents Power supply, Main board PCB, motor unit for by-pass damper, 8 black & red 6m long cables, installation and operation instructions.

The Proportional Multi zone System ZC-207 is designed to control up to 7 zones with round ABS dampers (diam. 4”, 6”, 8”, 10” 12” or 14” ), By–Pass electrical proportional damper, 2 relays and communication port. The communication port allows connectingAdditional controller to the main one. This feature allows connecting up to 14 zones to one system. The ZC-207 have indication panel that will display the status of system operation. It operates the air conditioning unit by two dry contact relays and is not interfering with the air conditioning controller. The A/C will receive the command to operate or shut off according to the total system demand for cooling or heating. The controller receives operation commands from each zone and controls the air damper proportionally.The system is equipped with quick connectors to ensure convenient and quick installation of the system elements. The controller C-207 automatically identifies the number of zones connected to it and the opening position of the dampers respectively, the controller will calculate the air conditioning load. According to the accumulation of the total openings of the dampers, the proportional electrical by-pass damper and air conditioner’s operation is adjusted to the required level of air conditioning. Consequently, with the decrease in heat or cool load, the evaporator fan speed will decrease, the compressor will stop its operation and in parallel, the by-pass damper will fully open to drain surplus air volume in the system and make an easy start for the fan in the next operation cycle. The main board C-207 controls: the evaporator fan speeds, one or two stage compressors, heat pump which operates in the heating mode, condenser fan speeds and fan coil.

Package contentsPower supply, main board PCB, motor unit for by-pass damper, 7black&red 6m long cables, installation and operation instructions.2 sensors, c-130 panel control.

k& d 6 l bl i t ll ti

CODE# 1289207DK

CODE# 1289207ZC

10

CODE# 128910KFD

CODE# 1289650DD

CODE# 128909

11

OPERATION KIT TYPE OPAL RC-11

The kit type OPAL RC-11 is an electronic control system which controls an electrical proportional damper. The system is based on a IR remote control unit that sends the operations commands to a wall mount IR receiver. The receiver is based on a strong micro-controller able to display the operating mode with 5 LEDs and to carry out the algorithm operation mode logic.Main characteristics:• Setting timer• Remote control with “I feel” function• ID code• On/Off, sleep mode• Can be installed as an independent unit in any existing air conditioning system• Cooling/Heating selector• Manual, automatic or turbo selector• Modern design• Quick and easy installation

Package contentsMotor unit for damper, 6 m long RJ11 connection cable, batteriesfor the remote control, installation and operation instructions.

OPERATION KIT TYPE OPAL 650-DDThe kit type OPAL 650DD is an electronic control unit for an electrical proportional damper that maintains a required room temperature. It can be installed in any existing air conditioning system. The unit is based on a micro-controller that carries out the user’s instructions. The unit provides optimum control of the desired working temperature according to the selected operation mode.Main characteristics:• Modern design• Display with back light• Flash mount thermostat for standard electrical box• Can be installed as an independent unit in any existing air conditioning system• Ergonomic and easy to use• Cooling/Heating selector• Manual, automatic selector• Quick and easy installation

Package contentsMotor unit for damper, connection RJ11 cable lg. 6 m, installation and operation instructions

OPERATION KIT TYPE OPAL C-128DD

The kit type OPAL C-128 is an electronic control unit for an electrical proportional damper that maintains a required room temperature. It can be installed in any existing air conditioning system. The unit is based on a micro-controller that carries out the user’s instructions. The unit provides optimum control of the desired working temperature according to the selected operation mode.Main characteristics:• Modern design• Can be installed as an independent unit in any existing air conditioning system• Ergonomic and easy to use• Cooling/Heating selector• Manual, automatic selector• Quick and easy installation

Package contentsMotor unit for damper, 6 m long RJ11 connection cable, installation and operation instructions.

DRY CONTACT FOR INVRTER A/CFor inverter A/C These cable are intended to be used for the connection of the dry contact from the ZC-207DK of the multizone PCB to the dry contact of the ducted units

Cable for Daikin unit 140130DKCable for Mitsubishi unit 140130MS Cable for Sanyo unit 140130SNCable for LG unit 140130LGCable for Fujitsu unit 140130FJ

MULTI ZONE KitZC207DK 7 rooms+ By pass

Opal RC-11 KitCode #

128910KFD

Opal 650DD KIT Code

#1289650 DD

Opal 128DD KITThermostat

Code # 128909

Dampers Code #(4”) 100mm DM1104(6”)160mm DM1106 (8”)200mm DM110810”)250mm DM1110(12”)315mm DM1112 (14”)355mm DM1114

ZC 207 DK +PS200Code # 1289207 DK

Remote control+I.R receiver

flush MountThermostat

Wall MountThermostat

8 motor Cables

1 Motor Damper

for bypass

1 RJ-11 cable

1 Motor Damper

1 RJ-11 cable

1 Motor Damper

1 RJ-11 cable

1 Motor Damper

2 Z O N E S 1 Room + 1 salon 1 + 2 O R 2 O R 2 + 3 2 D a m p e r s + 1 B Y- PA S SD a m p e r

3 Z O N E S 2 Room + 1 sal o n 1 + 3 O R 3 O R 3 + 4 3 D a m p e r s + 1 B Y- PA S SD a m p e r




12

DOUBLE DEFLECTION AIR SUPPLY GRILLES

1313

The visible parts of the A/C system ducting are the air supply grilles covering the outlets which are usually wall-mounted near the ceiling and control the air distribution from the system (temperature range 0º up to 65ºC / 30 up to 140 ºF ). The air supply grilles consist of a row of adjustable louver blades in the front and a row of parallel blades in the back. In the front individual louvers are adjusted in each segment with a handle on the centre blade to adjust the air discharge angle in sideway direction. The back damper blades segment adjust the air discharge angle to up and down directions. Damper blades also control the air throw. Maximum airflow is obtained when blades are in straight position while a shorter throw is obtained when blades are in an inclined position. For a complete shut-off damper blades can be closed. For better distribution of the air we recommend to use our opposed blade dampers. The air supply grilles are made of non–toxic plastic ABS in standard glossy off-white color, preventing condensation, scratch and corrosion resistance, wipes clean, consistent color and wide range of colors availability. Sizes: double deflection supply grilles are built in a modular pattern and are supplied in 9 heights: 110, 150, 200, 220, 300, 330, 400, 440, 550 & 660 mm (4.5, 5.9, 7.9, 8.6, 11.8, 13, 15.7, 17, 21.5, 26” ).

14

DOUBLE DEFLECTION AIR SUPPLY GRILLES STANDARD

The Classic line grilles feature a clean smooth line and straight corners. Available in glossy white and pearl colors (RAL 9001).

h. 220 mm CODE# 220x220 mm 11012222

220x330 mm 11012233

220x440 mm 11012244

220x660 mm 11012266

220x330 mm 11012233

220x440 mm 11012244

220x550 mm 11012255

220x660 mm 11012266

220x770 mm 11012277

220x880 mm 11012288

220x990 mm 11012299

h. 300 mm 300x300 mm 11013030

300x450 mm 11013045

300x600 mm 11013060

300x750 mm 11013075

300x900 mm 11013090

h. 330 mm 330x330 mm 11013333330x440 mm 11013344330x550 mm 11013355330x660 mm 11013366330x880 mm 11013388330x990 mm 11013399330x770 mm 11013377

h. 440 mm CODE#440x440 mm 11014444440x550 mm 11014455440x660 mm 11014466440x770mm 11014477440x880 mm 11014488440x990 mm 11014499

h. 550 mm550x550 mm 11015555550x660 mm 11015565550x770 mm 11015577550x880 mm 11015588550x990 mm 11015599

h. 660 mm660x660 mm 11016666660x770 mm 11016677660x880 mm 11016688660x990 mm 11016699

h. 110 mm CODE#110x110mm 11011111110x220mm 11011122110x330mm 11011133110x440mm 11011144110x550mm 11011155110x660mm 11011166110x770mm 11011177110x880mm 11011188110x990mm 11011199

h. 150 mm 150x200mm 11011520150x300mm 11011530150x350mm 11011535150x400mm 11011540150x500mm 11011550150x600mm 11011560150x650mm 11011565150x700mm 11011570150x800mm 11011580150x900mm 11011590150x1000mm 110115100

h. 200 mm 200x200mm 11012020200x300mm 11012030200x350mm 11012035200x400mm 11012040200x500mm 11012050200x600mm 11012060200x650mm 11012065200x700mm 11012070200x800mm 11012080200x900mm 11012090200x1000mm 110120100

COMBINED GRILLES

The combined grilles allow to integrate in one single product the air supply and the air return. The 600x200 and 440x220 mm models can be delivered along with the adapter already assembled onto the grilles.

CODE#200x600 mm 111502060200x600 mm with adapter 1115020601200x800 mm 111502080220x330 mm 220x440 mm with adapter 115022401

15

AIR SUPPLY GRILLES TYPE SUPER TECH

The Super Tech line is a new elegantly designed product that becomes an integral part in the appearance of the modern house, in addition to its functional advantages. The sizes are the Classic line supply grilles standard sizes and enable upgrading of existing grilles, already in use. Super Tech supply grilles are available in white, pearl and aluminum.A wider range of colors is available upon customer request.

h. 150 mm CODE#150x300 mm TE111530150x400 mm TE111540150x500 mm TE111550

h. 200 mm200x300 mm TE112030200x400 mm TE112040200x500 mm TE112050

AIR SUPPLY GRILLES TYPE G

The frame of the Super G line is shaped with rounded and superfine pattern corners with the same dimensions of the Classic line

h. 150 mm CODE#150x300 mm SG111530150x400 mm SG111540150x500 mm SG111550

h. 220 mm220x330 mm SG112233220x220 mm SG112222

h. 300 mm300x300 mm SG113030

h. 200 mm200x300 mm SG112030200x400 mm SG112040200x500 mm SG112050

STRIP LINE - INJCETION

h. 110 mm CODE#110x800 mm 1179110800 110x1000 mm 11791101000110x1200 mm 11791101200110x1500 mm 11791101500110x2000 mm 11791102000

h. 97 mm CODE#97x800 mm 117997800 97x1000 mm 117997100097x1200 mm 117997120097x1500 mm 117997150097x2000 mm 1179972000STRIP LINE WITH BACK BLADEh110MM 11799999h.97mm 11799799

DOUBLE DEFLECTION AIR SUPPLY GRILLES P

ER

FOR

MA

NC

E

OPENING VELOCITY [m/sec] 1,5 2 2,5 3 3,5 4 4,5 5110x110 Air Flow [mc/h] 43 54 68 97 83 112 126 140

PL [Pa] 2 3 5 7 10 13 16 19Throw [m] 1,8 2,2 2,6 2,9 3,3 3,6 3,8 4,1Noise [dB(A)] 15 17 19 22 23 25 28 30

220x110 Airflow [mc/h] 83 112 140 194 165 223 252 277PL [Pa] 2 4 6 8 10 13 17 20Throw [m] 2,5 3,1 3,7 4,2 4,7 5,1 5,5 5,8Noise [dB(A)] 17 19 22 24 26 28 30 31

330x110 Airflow [mc/h] 126 166 209 292 252 335 378 418PL [Pa] 2 4 6 8 11 14 17 21Throw [m] 3 3,7 4,3 4,9 5,4 5,9 6,4 6,8Noise [dB(A)] 18 20 23 25 27 29 31 33

440x110 Airflow [mc/h] 166 223 277 389 335 446 500 558PL [Pa] 2 4 6 8 11 14 18 22Throw [m] 3,5 4,2 4,9 5,6 6,2 6,7 7,3 7,7Noise [dB(A)] 19 21 24 26 28 31 33 35

300x150 Airflow [mc/h] 158 212 263 371 317 425 475 529PL [Pa] 2 4 6 8 11 14 18 21 Throw [m] 3,4 4,1 4,8 5,4 6 6,6 7,1 7,6 Noise [dB(A)] 19 21 24 26 28 30 33 35

400x150 Air Flow [mc/h] 209 277 346 486 418 554 626 695PL [Pa] 2 4 6 9 12 15 18 22Throw [m] 4 4,8 5,5 6,2 6,9 7,5 8,1 8,6Noise [dB(A)] 19 22 25 27 30 32 34 37

500x150 AirFlow [mc/h] 256 342 428 598 515 684 770 857PL [Pa] 2 4 6 9 12 15 19 23Throw [m] 4,5 5,3 6,2 6,9 7,7 8,4 9 9,6Noise [dB(A)] 20 23 26 28 31 33 36 38

600x150 AirFlow [mc/h] 317 425 529 742 634 846 950 1058PL [Pa] 3 4 7 9 12 16 19 23Throw [m] 5,1 6 6,9 7,8 8,6 9,4 10,1 10,8Noise [dB(A)] 21 24 27 30 33 35 38 40

800x150 AirFlow [mc/h] 382 489 594 738 630 864 990 1062PL [Pa] 3 4 7 9 12 16 19 25Throw [m] 5,1 6,1 7 7,8 8,7 9,5 10,2 10Noise [dB(A)] 22 25 27 31 34 35 38,5 41

900x150 AirFlow [mc/h] 475 634 792 1108 950 1271 1429 1588PL [Pa] 3 5 7 10 13 16 20 24Throw [m] 6,5 7,6 8,7 9,8 10,8 11,7 12,6 13,5Noise [dB(A)] 23 26 29 33 36 39 42 45


400x200 AirFlow [mc/h] 292 392 490 684 587 781 878 979PL [Pa] 2 4 7 9 12 15 19 23Throw [m] 4,8 5,8 6,6 7,5 8,3 9 9,7 10,3Noise [dB(A)] 21 24 206 29 32 35 37 40

500x200 AirFlow [mc/h] 367 490 612 857 734 979 1102 1220PL [Pa] 3 4 7 9 12 16 20 24Throw [m] 5,5 6,6 7,5 8,5 9,3 10,2 11 11,7Noise [dB(A)] 22 25 28 31 34 37 39 42



900x200 AirFlow [mc/h] 659 878 1101 1541 1321 1760 1980 2200PL [Pa] 2 4 7 9 12 16 19 23Throw [m] 7,8 9,1 10,4 11,6 12,8 13,9 15 16Noise [dB(A)] 24 28 31 35 39 42 45 48


440x220 AirFlow [mc/h] 331 446 554 777 670 893 1001 1116PL [Pa] 2 47 7 9 12 16 19 23Throw [m] 7 8,4 9,8 11,2 12,4 13,4 14,6 15,4Noise [dB(A)] 20 22 25 27 30 33 35 38

PART NUMBER L1 L2 B1 B2

110x110 173 110 173 110110x220 284 220 173 110110x330 395 330 173 110110x440 504 442 173 110150x300 364 300 213 150150x400 460 400 213 150150x500 561 500 213 150150x600 663 600 213 150

PART NUMBER L1 L2 B1 B2

150x800 863 800 213 150150x900 963 900 213 150200x300 363 300 263 200200x400 465 400 263 200200x500 562 500 263 200200x600 664 600 263 200200x800 863 800 263 200200x900 964 900 263 200220x220 284 220 284 220220x440 504 444 284 222

L2L1 H1H2

B2

B1

16

17

RETURN AIR GRILLES

Our return air grilles with or without filter are manufactured by injection molding from ABS plastic. This material is corrosion-resistant. Insulating properties of ABS plastic prevent condensation making it ideal suitable for use with air conditioning systems both cool and heat (temperature range 0 to 65 °C / 30 to 140 °F). The attractive return air grilles blend in with room décor and can be mounted on the wall or the ceiling. Standard color is glossy off-white; other colors can be supplied for large quantities.

1818

RETURN AIR GRILLES WITH FILTER

Return air grilles with filter are equipped with two pieces molded frames: outer frame for direct mounting to the wall or ceiling, inner removable frame with grille housing and filter drawer. Inner removable frame is always 20 mm. The filter has high resistance and is easy to clean (washable).

RETURN AIR GRILLES WITHOUT FILTER

Return air grille without filter are built from two parts. The grille is injected as one piece unit which is equipped with curved blades with 19 mm spacing and 30º down deflection and a frame. Three frame widths are available: narrow 20 mm, regular 30 mm and wide 40 mm.

Other sizes available. Other sizes available.

h. 110 mm code#110 x220 mm 11841122110 x330 mm 11841133110 x440 mm 11841144

h. 150 mm 150 x300 mm 11841530150 x350 mm 11841535150 x400 mm 11841540

h. 200 mm 200 x700 mm 11842070

h. 220 mm 220 x220 mm 11842222220 x330 mm 11842233220 x440 mm 11842244220 x550 mm 11842255220 x660 mm 11842266220 x880 mm 11843030

h.300 mm 300x300 11891122

h. 110 mm code#110 x220 mm 11801122110 x330 mm 11801133110 x440 mm 11801144

h. 150 mm150 x150 mm 11801515150 x200 mm 11801520150 x300 mm 11801530150 x350 mm 11801535150 x400 mm 11801540

h. 220 mm220 x220 mm 11802222220 x330 mm 11802233220 x440 mm 11802244220 x550 mm 11802255220 x660 mm 11802266220 x880 mm 11802288

h. 300 mm 300x300 mm 11803030

h. 330 mm code#330 x330 mm 11843333430 x330 mm 11843343

330 x550 mm 11843355

h. 400 mm400 x1200 mm 118440120400 x400 mm 11844040400 x600 mm 11844060400 x800 mm 11844080

h. 440 mm440 x440 mm 11844444

Altre 500 x600 mm 11845060600 x600 mm (T bar) 11846060525 x525 mm (T bar) 11845252

h. 330 mm code#330 x330 mm 1180333330 x370 mm 11803337330 x440 mm 11803344330 x550 mm 11803355

h. 440 mm 440 x440 mm 11804444

h. 400 mm 400 x400 mm 11804040400 x800 mm 11804080400 x1200 mm 118040120

h. 600 mm 500 x600 mm 11806050400 x600 mm 11806040600 x600 mm 11806060

h. 520 mm 520 x520 mm (T bar) 1180525

19

Return air grilles with filter and adapter is used to return the air through the filter from the room to the indoor unit or open space. The grille is safe and nicely designed. #Code150x150 mm 11841515150x300 mm 11841530220x220 mm 11842222220x550 mm 11842255300x300 mm 11843030595x595 mm 11845252400x600 11844060

RETURN AIR GRILLES FOR DOORSThis grille is manufactured by injection as one piece and it’s supplied in two units. Each unit is assembled on each side of the lower part of the door. The grille enables air outlet even if the door is closed. The grille will fit all kind of doors. #Code110x330 mm 11801133150x300 mm 11801530150x350 mm 11801535150x400 mm 11801540220x220 mm 11802222220x330 mm 11802233220x440 mm 11802244300x300 mm 11803030

EGG CRATE RETURN AIR GRILLES WITH FILTER

Return air grilles with filter are manufactured by injection molding. The method for fixing the Egg Crate is screw fixing through the flange face or through the flange neck.

CODE#150x150 mm 11861515300x150 mm 11861530200x200 mm 11862020250x250 mm 11862525300x300 mm 11863030595x595 mm 11865995

RETURN WITH FILTER

20

RETURN AIR GRILLE WITH FILTER

CODICE L1 L2 B1 B2 H1

150x300 380 304 234 156 11

150x350 436 358 235 156 11

150x400 460 400 213 150 5

220x220 301 227 301 227 11

220x330 413 338 301 223 11

220x440 522 446 301 226 11

220x550 631 550 301 219 11

220x880 966 889 306 227 11

300x300 384 306 384 306 11

400x400 480 406 480 406 11

400x600 682 610 480 406 11

600x600 655 580 655 580 11

540x540 623 535 623 535 10

DIMENSIONS

STRIP LINE GRILLES

Plastic strip line grilles are used to accommodate architectural and aesthetic requirements. They are usually fitted in the side wall or to window sills and may be used for supply or return air applications. Louvers are of the fixed blade design. The “no drip” feature of the material used in their construction ensures elimination of condensate dripping. Additionally any RAL can be supplied. Our strip line adapters (plenums) are available as accessories for 4 to 9 slot versions and up. These are designed to save on additional fabrication and field labor costs by allowing for simple connection to flexible ducting

For long strip line (IOM AND UP)we provide in parts.

21

There are 2 sizes of frame: 10 or 20 mm. Thanks to the modular design the strip line grilles are available in any length

DIMENSIONS

No. of louvers Neck height in mm

4 71

5 84

6 97

7 110

8 123

9 136

* Height can be increase every 13 mm.

LINEAR SLOT DIFFUSERS

Our plastic linear slot diffusers provide a combination of engineering excellence and architectural appeal in a single product. The geometric plastic slot construction contributes to clean and crisp straight lines without affecting the air distribution performance. These products can be applied to ceilings or high side wall locations. Since these diffusers feature an adjustable supply air pattern, they are intended for pre-setting by the installer for optimum airflow performance. Our plastic slot diffusers are very suitable for VAV applications as they can maintain stable horizontal air patterns over a wide range of air volumes; even down to low airflow rates. Aerodynamically shaped pattern controllers contribute to the performance stabilitywhile providing a full 180° of air pattern adjustment. A choice of 3 slot widths is available. The number of slots can range from 1 to 10 all in one piece construction. The manufacturing process allows that almost any length can be accommodated.The standard color is white. Options to supply any recognized RAL color exist for special orders subject to minimum quantity requirements being satisfied.Our slot adapter (plenums) are availableas accessories for 2 to 3 slot versions. These are designed to save on additional fabrication and field labor costs by allowing for simple connection to flexible ducting.

on of engineering

For long slot (IOM AND UP)we provide in parts.

22

DIMENSIONS (mm)

No. of slots B N 1 70 39 2 108 78 3 145 115 4 182 153 5 222 192 6 260 230

CEILING DIFFUSERS

23

Our ceiling diffusers are made by injection molding from ABS non-toxic plastic suitable for hot or cold air (0 to 65 °C / 30 to 140 °F). The attractive diffuser blends in with any white room decor, prevents condensation, has light weight and is scratch and corrosion resistant. Standard color is glossy off-white but other varieties of colors are available. The basic diffuser consists of three sections: the centre core, the frame and the adapter (plenum). The centre core distributes the air in a uniform distribution pattern. Low air discharge angles assure a draft free zone of occupancy. The out flowing air jet mixes rapidly with the room air, thereby equalizing temperature throughout the whole occupied space. The adapter determines the neck diameter and the frame determines face dimensions. Various neck and face dimension combinations are possible. Both neck diameter and face dimension are required for specification of diffuser size. The diffusers can be equipped with contiguously adjustable baffle damper. The baffle damper is subdivided into 3 lobes and is operatedManually. The diffuser can be closed completely thereby shutting off space not in use. In the open position the baffles are placed one behind the other obstructing only three narrow sectors which are 120° apart. Baffle opening and angular location of the lobes can be set by an easily accessible knob in the centre of the diffuser space. The diffuser fits the standard T-bar 595, 600and 625 mm or plaster ceiling. Our opposed blade dampers are available and recommended for better air flow control.

Our ceiling diffusers are available in 5 different configurations:

1. Square Ceiling Diffuser with or without baffle damper CEILING DIFFUSERS2.Round Ceiling Diffuser with or without baffle damper3.Square Ceiling Diffuser two ways4.Square Ceiling Diffuser three ways5.Square Ceiling Diffuser double deflection.

24

4 WAYS AIR PATTERNSQUARE DIFFUSERS

code#330x330 mm 1150221440X440 mm 1150301595x595 mm opening 225x225 mm 1151221 T-BAR

595x595 mm opening 305x305 mm 1151301 T-BAR





SQUARE DIFFUSER WITH EGG CRATE

code#595X595 mm opening 225x225 mm T-BAR 1153221595X595 mm opening 305x305 mm T-BAR 1153301595x595 mm opening 385x385 mm T-BAR 1153381

2 WAYS AIR PATTERN SQUARE DIFFUSER

code#330x330 mm 1150122440X440 mm opening 305x305 mm 1150302

3 WAYS AIR PATTERN SQUARE DIFFUSERS

code#330X330 mm 1150223

ROUND DIFFUSERS

code#Diam. 330 mm opening diam. 240 mm 1160201Diam. 440 mm 1160261Diam.585 mm opening diam. 350 mm 1160311

FOR T-BAR585x585 mm 585 diam. opening diam. 350 mm 1161311

* can be provided with damper

duct-diam. opening (mm) NA cm2 velocity m/sec 2 2,5 3 3,5 4 5 6 7 8

8” (200) 314 Flow rate m3/h 234 292 349 410 468 583 702 817 932

225x225 PL Pa 4 8 12 17 22 34 48 65 83

Throw m 0,6 0,7 0,9 1 1,2 1,5 1,8 2,1 2,4

Noise dB(A) 20 23 25 28 31 36 41 45 50

10” (250) 490 Flow rate m3/h 364 457 547 637 731 911 1094 1278 1458

305x305 Flow rate m3/h 364 457 547 637 731 911 1094 1278 1458

PL Pa 6 10 15 21 27 42 59 78 100

Throw m 0,8 1 1,2 1,4 1,6 1,9 2,3 2,7 3,1

Noise dB(A) 20 24 28 31 34 40 46 50 54

12” (300) 707 Flow rate m3/h 526 655 788 918 1051 1314 1577 1840 2102

385x385 PL Pa 8 13 18 25 32 50 70 94 122

Throw m 0,9 1,2 1,4 1,7 1,9 2,4 2,8 3,3 3,8

Noise dB(A) 22 26 30 34 38 44 49 54 57

duct-diam. opening (mm) NA cm2 velocity m/sec 2 2,5 3 3,5 4 5 6 7 8

8” (200) 324 Flow rate m3/h 234 292 349 410 468 583 702 817 932

330 PL Pa 7 10 15 20 26 40 58 80 105

Throw m 0,7 1 1,2 1,4 1,6 2 2,3 2,5 2,7

Noise dB(A) 23 26 28 31 33 38 42 46 50

10” (250) 490 Flow rate m3/h 364 457 547 637 731 911 1094 1278 1458

440 PL Pa 10 14 20 27 36 56 80 110 144

Throw m 1,1 1,4 1,7 1,9 2,2 2,6 3 3,2 3,4

Noise dB(A) 25 29 32 35 37 43 48 52 56

10” (250) 490 Flow rate m3/h 526 655 788 918 1051 1314 1577 1840 2102

585 PL Pa 13 19 27 36 46 70 100 135 176

Throw m 1,4 1,8 2,1 2,4 2,7 3,2 3,6 3,9 4,1

Noise dB(A) 28 31 34 37 40 46 51 55 60

25

PERFORMANCE SQUARE DIFFUSERS

PERFORMANCE ROUND DIFFUSERS

ADAPTERS (PLENUMS)

Adapters are used as connectors between supply grilles or ceiling diffuser and return air grilles on one side and to the flexible ducts in the other side. Large various combinations of adapters are available including different sizes and diameters of outlets to fit flexible ducts from 4’’-14’’. The connection to the flexible duct is either round or oval according to the size of the adapter.The various sizes of the adapters are of the various sizes of our grilles and are fit to contain opposed blade dampers for supply grilles or for ceiling diffusers. Adapters in angle of 90º as a solution for lack of space in the ceiling are also available. The adapters are manufactured by injection molding and from corrosion-resistant ABS plastic material. Insulating properties of this material prevent condensation making it ideal suitable for use with A/C systems that both cool and heat (temperature range 0 to 65ºC / 30º to 140 ºF). Special customerspecifications are produced by vacuum forming as well as adapters for the indoor units of the existing A/C.

27

28

ADAPTERS FOR SUPPLY GRILLES

For grilles h. 110 mm CODE#110 x110 mm diam. 100 mm (4”) 1200111104110 x110 mm diam. 150 mm (6”) 1200111106110 x220 mm diam. 100 mm (4”) 12001122040110 x220 mm diam. 125 mm (5”) 12001122050110 x220 mm diam. 150 mm (6”) 12001122060110 x220 mm diam. 200 mm (8”) 12001122080110 x330 mm diam. 125 mm (4”) 12001133040110x330 mm diam. 150 mm (6”) 90º 120011330621110 x330 mm diam. 150 mm (6”) 12001133060110 x330 mm diam. 200 mm (8”) 12001133080110 x330 mm diam. 250 mm (10”) 12001133100110 x440 mm diam. 150 mm (6”) 12001144060110 x440 mm diam. 200 mm (8”) 12001144080110 x440 mm diam. 250 mm (10”) 12001144100110 x550 mm diam. 150 mm (6”) 12001155060110 x550 mm diam. 200 mm (8”) 12001155080110 x550 mm diam. 250 mm (10”) 12001155100110 x550 mm diam. 300 mm (12”) 12001155120110 x660 mm diam. 150 mm (6”) 12001166060110 x660 mm diam. 200 mm (8”) 12001166080110 x660 mm diam. 250 mm (10”) 12001166100110 x660 mm diam. 300 mm (12”) 12001166120110 x770 mm diam. 200 mm (2x8”) 1200111188280110 x770 mm diam. 200 mm (8”) 120011110080110 x770 mm 1 connection diam. 200 mm e 1 connection diam. 150 mm (1x8” + 1x6”) 120011770806110 x880 mm diam. 200 mm (2x8”) 12001188280

For grilles h. 120 mm120x1120 mm 1 connection diam. 200 mm e 1 connection diam. 150 mm (1x8” + 1x6”) 120012112806

For grilles h. 130 mm130x1120 mm 1 connection diam. 200 mm e 1 connection diam. 250 mm (1x8” + 1x10”) 120013111281

For grilles h. 150 mm CODE#150x150 mm diam. 150 mm (6”) 12001515060200x150 mm diam. 100 mm (4”) 12001520040200x150 mm diam. 150 mm (6”) 12001520060300x150 mm diam. 100 mm (4”) 12001530040300x150 mm diam. 150 mm (6”) 12001530060300x150 mm diam. 200 mm (8”) 12001530080300x150 mm diam. 250 mm (10”) 12001530100300x150 mm diam. 300 mm (12”) 12001530120300x150 mm diam. 150 mm (6”) 90° 12001530062150x300 mm diam. 200 mm (8”) 90° 12001530082

350x150 mm diam. 150 mm (6”) 12001535060350x150 mm diam. 200 mm (8” 12001535080350x150 mm diam. 250 mm (10”) 12001535100400x150 mm diam. 150 mm (6”) 120015340060150x400 mm diam. 200 mm (8”) 90° 12001140821400x150 mm diam. 200 mm (8”) 12001540080400x150 mm diam. 250 mm (10”) 12001540100400x150 mm diam. 300 mm (12”) 12001540120450x150 mm diam. 200 mm (8”) 12001545100450x150 mm diam. 250 mm (10”) 12001540100480x150 mm diam. 250 mm (10”) 12001548100500x150 mm diam. 200 mm (8”) 12001550080150x500 mm diam. 200 mm (8”) 90° 120015500821500x150 mm diam. 250 mm (10”) 12001550100500x150 mm diam. 300 mm (12”) 12001550120600x150 mm diam. 200 mm (8”) 12001550120600x150 mm 1 connection diam. 200 mm (8”) and 1 connection diam. 250 mm (10”) 120015600810600x150 mm diam. 250 mm (10”) 12001560100600x150 mm 2 connections diam. 200 mm (2x8”) 12001560280700x150 mm diam. 250 mm (10”) 12001570100700x150 mm diam. 300 mm (12”) 12001570120800x150 mm 2 connections diam. 200 mm (2x8”) 12001580280

For grilles h. 200 mm200x200 mm diam. 100 mm (4”) 12002020040200x200 mm diam. 125 mm (5”) 12002020050200x200 mm diam. 150 mm (6”) 12002020060200x200 mm diam. 200 mm (8”) 12002020080300x200 mm diam. 150 mm (6”) 12002030060300x200 mm diam. 150 mm (6”) 90° 120020300621300x200 mm diam. 200 mm (8”) 12002030080300x200 mm diam. 200 mm (8”) 90° 12002030082300x200 mm diam. 250 mm (10”) 12002030100350x200 mm diam. 200 mm (8”) 12002035080400x200 mm diam. 100 mm (4”) 12002040040400x200 mm diam. 150 mm (6”) 12002040060400x200 mm diam. 150 mm (6”) 90° 120020400621400x200 mm diam. 150 mm (6”) 90° 120020400622400x200 mm diam. 200 mm (8”) 12002040080400x200 mm diam. 200 mm (8”) 90º 12002040082400x200 mm diam. 250 mm (10”) 12002040120400x200 mm diam. 250 mm (10”) 90° 12002040102400x200 mm diam. 300 mm (12”) 12002040120500x200 mm diam. 150 mm (6”) 90° 120020500621500x200 mm diam. 200 mm (8”) 12002050080

ADAPTERS

ADAPTERS

29

500x200 mm diam. 200 mm (8”) 90º 12002050081500x200 mm 1 connection diam. 200 mm (8”) and 1 connection diam. 250 (10”) 120020500810500x200 mm diam. 250 mm (10”) 12002050100500x200 mm diam. 300 mm (12”) 12002050120500x200 mm diam. 200 mm (8”) 90° 12002050821600x200 mm diam. 200 mm (8”) 12002060080600x200 mm diam. 250 mm (10”) 12002060100600x200 mm diam. 300 mm (12”) 12002060120700x200 mm diam. 250 mm (10”) 12002070100

For grilles h. 220 mm220x220 mm diam. 150 mm (6”) 12002222000220x220 mm diam. 200 mm (8”) 12002222080220x220 mm diam. 200 mm (8”) 120022220801220x220 mm diam. 200 (8”) a 90° 12002222082330x220 mm diam. 150 mm (6”) 12002233060330x220 mm diam. 200 mm (8”) 12002233080330x220 mm diam. 250 mm (10”) 12002233100330x220 mm diam. 250 mm (10”) 90° 12002233102330x220 mm diam. 300 mm (12”) 12002233120440x220 mm diam. 150 mm (6”) 12002244060440x220 mm diam. 200 mm (8”) 12002244080440x220 mm diam. 250 mm (10”) 12002244100440x220 mm diam. 300 mm (12”) 12002244120550x220 mm diam. 200 mm (8”) 12002255080550x220 mm diam. 250 mm (10”) 12002255100550x220 mm diam. 300 mm (12”) 12002255120660x220 mm diam. 250 mm (10”) 12002266100660x220 mm diam. 200 mm (8”) 12002266080660x220 mm diam. 250 mm (10”) 12002266100660x220 mm diam. 300 mm (12”) 12002266120

For grilles h. 300 mm300x300 mm diam. 150 mm (6”) 12003030060300x300 mm diam. 150 mm (6”) 90° 12003030062300x300 mm diam. 200 mm (8”) 12003030080300x300 mm diam. 250 mm (10”) 12003030100300x300 mm diam. 250 mm (10”) 90° 12003030102300x300 mm diam. 300 mm (12”) 12003030120

For grilles h. 330 mm330x330 mm diam. 150 mm (6”) 12003333060330x330 mm diam. 200 mm (8”) 12003333080330x330 mm diam. 250 mm (10”) 12003333100330x330 mm diam. 300 mm (12”) 12003333120440x330 mm diam. 250 mm (10”) 12003344100440x330 mm diam. 250 mm (10”) 12003344101440x330 mm diam. 300 mm (12”) 12003344120440x330 mm diam. 300 mm (12”) 12003344121550x330 mm diam. 250 mm (10”) 12003355100550x330 mm diam. 300 mm (12”) 12003355120550x330 mm diam. 350 mm (14”) 12003355140

For grilles h. 385 mm385x385 mm diam. 300 mm (12”)

For grilles h. 400 mm400x400 mm diam. 200 mm (8”) 12004040080400x400 mm diam. 250 mm (10”) 12004040100400x400 mm diam. 300 mm (12”) 12004040120

600x400 mm diam. 250 mm (10”) 12004060100600x400 mm diam. 300 mm (12”) 12004060120600x400 mm diam. 350 mm (14”) 12004060140600x400 mm diam. 400 mm (16”) 12004060160600x400 mm 4 connections diam. 200 mm (4x8”) 12004060380600x400 mm 2 connections diam. 250 mm (2x10”) 12004060300600x400 mm 2 connections diam. 300 mm (2x12”) 12004060320800x400 mm 2 connections diam. 300 mm (2x12”) 12004080320800x400 mm 2 connections diam. 350 mm (2x14”) 12004080390

For grilles h. 440 mm440x440 mm diam. 200 mm (8”) 12004444080440x440 mm diam. 250 mm (10”) 12004444100440x440 mm diam. 300 mm (12”) 12004444120440x440 mm diam. 350 mm (14”) 12004444140

For grilles h. 460 mm460x460 mm diam. 200 mm (8”) 12004646080460x460 mm diam. 300 mm (12”) 12004646120460x460 mm diam. 350 mm (14”) 12004646141

For grilles h. 540 mm540x540 mm diam. 150 mm (6”) 12005454060540x540 mm diam. 200 mm (8”) 12005454080540x540 mm 200 mm (2x8”) 12005454280540x540 mm diam. 250 mm (10”) 12005454100540x540 mm diam. 300 mm (12”) 12005454120540x540 mm 300 mm (2x12”) 12005454200540x540 mm diam. 350 mm (14”) 12005454140540x540 mm 200 mm (2x8”) 12005454280540x540 mm 250 mm (2x10”) 12005454300540x540 mm 300 mm (2x12”) 12005454320540x540 mm 350 mm (2x14”) 12005454340

For grilles h. 550 mm550x550 mm- for egg create return air grille 12005555000

For grilles h. 600 mm600x600 mm diam. 200 mm (8”) 12006060080600x600 mm diam. 250 mm (10”) 12006060100600x600 mm diam. 300 mm (12”) 12006060120600x600 mm 250 mm (2x10”) 12006060300600x600 mm 300 mm (2x12”) 12006060320600x600 mm 350 mm (2x14”) 12006060340

For Strip line injection

110X1007 mm no srigot 1211101007110X1007 mm 8”(200mm) 12111101007080110X1007 mm 10”(250mm) 12111101007100110X1007 mm 8”x2(200mmx2) 12111101007280110X1007 mm 10”x2(250mmx2) 1211110100730097X1007 mm no srigot 121197100797X1007 mm 8”(200mm) 121197100708097X1007 mm 10”(250mm) 121197100710097X1007 mm 8”x2(200mmx2) 121197100728097X1007 mm 10”x2(250mmx2) 1211971007300

ADAPTERS

ADAPTERS

t 1212111111 1010111

30

Adapter for square diffuser 305 6” 12013030060Adapter for square diffuser 305 8” 12013030080Adapter for square diffuser 305 8” 90º 12013030082Adapter for square diffuser 305 6”- 8” 90º 12013030083Adapter for square diffuser 305 6” 90º 12013030062Adapter for square diffuser 0pn.305 10” 90º 12013030102Adapter for square diffuser 0pn.305 10” 12013030100Adapter for square diffuser 0pn.305 12” 12013030120Adapter for square diffuser 0pn.305 6” with edge 12013030460Adapter for square diffuser 0pn.305 8” with edge 12013030480Adapter for square diffuser 0pn.305 10” with edge 12013030500Adapter for square diffuser 0pn.305 12” with edge 12013030520Adapter for square diffuser 0pn.225 6” 12012222060Adapter for square diffuser 0pn.225 6” 90º 12012222062Adapter for square diffuser 0pn.225 8” 12012222080Adapter for square diffuser 0pn.225 6”- 8” 120122220806Adapter for square diffuser 0pn.225 8” 90º 12012222082Adapter for square diffuser 0pn.225 10” 12012222100Adapter for square diffuser 0pn.225 10” 90º 12012222102Adapter for square diffuser 385 6” 12013838060Adapter for square diffuser 385 6” 90º 12013838062Adapter for square diffuser 385 8” 12013838080Adapter for square diffuser 385 8” 90º 12013838082Adapter for square diffuser 385 6- 8” 90º 12013838083Adapter for square diffuser 385 10” 12013838100Adapter for square diffuser 385 10” 90º 12013838102Adapter for square diffuser 385 12” 12013838120Adapter for square diffuser 385 12” 90º 12013838122Adapter for square diffuser 460 10” 12014545100Adapter for square diffuser 460 8”- 10” 120145451008Adapter for square diffuser 460 10” 90º 12014545102Adapter for square diffuser 460 12” 12014545120Adapter for square diffuser 460 10”- 12” 120145451210

ADAPTERS FOR SQUARE CEILING DIFFUSERS

Adap. for O.B.D Adap. for O.B.D damper 225 6” 12072222060Adap. for opposed blade damper 225 8” 12072222080Adap. for opposed blade damper 225 8” 90° 12072222082Adap. for opposed blade damper 225 6” 90° (Multi) 12082222100Adap. for opposed blade damper 225 10” 12072222100

Adap. for Roun. Diffuser

Adap. for Roun. Diff. 330 6” 90° 120233062Adap. for Roun. Diff. 330 6” 120233060Adap. for Roun. Diff. 330 8” 120233080Adap. for Roun. Diff. 330 10” 120233100Adap. for Roun. Diff. 440 6” 120244060Adap. for Roun. Diff. 440 6” 90° 120244062Adap. for Roun. Diff. 440 8” 120244080Adap. for Roun. Diff. 440 10” 1202440800Adap. for Roun. Diff. 440 6”-8” 90° 12024408062Adap. for Roun. Diff. 440 8” 90° 120244082Adap. for Roun. Diff. 440 10” 120244100Adap. for Roun. Diff. 440 6”-8” with 595 Frame 1202440860Adap. for Roun. Diff. 585 6” 120258060Adap. for Roun. Diff. 585 8” 120258080Adap. for Roun. Diff. 585 8” 90° 120258082Adap. for Roun. Diff. 585 10” 120258100Adap. for Roun. Diff. 585 10” 90° 120258102Adap. for Roun. Diff. 585 12” 120258120Adap. for Roun. Diff. 585 12”-10-8” 120258121008Adap. for Roun. Diff. 585 12” 90° 120258122

Adap. for O.B.D 305 6” 12073030060Adap. for O.B.D 305 6” 90º 12073030062Adap. for O.B.D 305 8” 12083030080Adap. for O.B.D 305 8” 90º (Multi) 12083030082Adap. for O.B.D 305 10” 12073030100Adap. for O.B.D 305 10” 90º 12073030102Adap. for O.B.D 305 10” 90º (Multi) 12083030102Adap. for O.B.D. 385 6” 12073838060Adap. for O.B.D. 385 6” 90 12083838062Adap. for O.B.D. 385 8” 12083838080Adap. for O.B.D 385 8”90° 12073838082Adap. for O.B.D 385 10” 12083838100Adap. for O.B.D. 385 10”90° 12073838102Adap. for O.B.D.385 12” 12083838120Adap. O.B.D 385 12”90° 12083838122

OPENING SD (“/mm) L1 (mm) L2 (mm) B1 (mm) B2 (mm) H1 (mm) H2 (mm)

110x110 4 151 120 151 120 2 104

6 153 122 152 120 2 84

220x110 4 270 230 160 125 2 111

6 267 230 160 125 2 125

8 273 243 160 132 2 100

330x110 6 385 243 160 125 2 127

8 385 345 165 125 2 127

10 385 345 165 125 2 127

440x110 6 495 455 165 125 2 127

8 495 455 165 125 2 127

10 495 455 165 125 2 127

550x110 6 600 564 165 133 2 178

8 600 565 165 133 2 178

10 600 565 165 133 2 178

12 600 565 165 133 2 180

660x110 6 710 674 165 133 2 180

8 710 674 165 133 2 177

10 710 674 165 133 2 187

12 710 674 165 133 2 187

500x150 6 195 154 195 155 2 126

200x150 6 252 209 195 155 2 133

300x150 6 350 310 200 160 2 187

8 350 310 200 160 2 187

10 350 310 200 160 2 187

12 350 310 200 160 2 187

300x150 a 90° 8 350 310 200 160 2 187

300x200 8 350 310 250 210 2 187

400x200 10 450 410 255 215 2 187

220x220 8 270 232 70 232 2 125

440x220 10 490 451 270 230 2 187

660x220 12 710 675 275 245 2 150

300x300 8 350 310 350 310 2 187

10 350 310 350 310 2 190

400x400 12 455 415 450 415 2 200

ADAPTERS (PLENUMS) DIMENSIONS

L1L2

SD

B2

SD

B1

H1 H2

31

Y elbow

Our Y elbows are manufactured using corrosion-resistant ABS plastic. The insulating properties of which prevent condensation making them ideal for use with heating/cooling air conditioning systems (temperature 0 to 65°C / 30 to 140°C). Frequently ordered models are manufactured by injection molding; other models made to customer specifications are produced by vacuum forming.Y elbows are a convenient and simple connector for branch-offs from flexible ducts. Slide the flexible duct over the elbow end and fasten it with a plastic bend suited to this purpose. The elbow is fitted with a collar to secure the flexible duct.Y elbows have an equal angle of 120° between the branches. Thus the outlet branches are symmetrical to the common inlet branch axis resulting in an equal pressure drop for both outlet branches. Outlet branches are either equal to inlet branches or smaller. These Y elbows are uniquely designed and the elbow shell is split into two halves which are joined together on site. These stackable Y elbows ship compactly – saving storage space and shipping costs. Assembly is simple: slide the web into the slot, press the halves together until they click and the elbow is ready for use.

32

Y ELBOWS 3 WAYS

CODE#Y elbow 3x”4 1300040404Y elbow 3x”5 1300050505Y elbow 2x”4/1x”6 1300060404Y elbow 4”/5”/”6 1300060504Y elbow 2x5”+1x6” 1300060505Y elbow 3x”6 1300060606Y Elbow 1x”8/2x”6 1300080606Y Elbow 1x”6/2x”8 1300080806Y Elbow 3x”8 1300080808Y Elbow 1x”10/2x”6 1300100606Y elbow1x”6/1x”8/1x”10 1300100806Y Elbow 1x10/2x8 1300100808Y Elbow 2x”10/1x”6 1300101006Y elbow 2x”10/1x”8 1300101008Y elbow 2x”10/1x”10 1300101010Y Elbow 1x”12/2x”8 1300120808Y Elbow 1x”12/1x”10/1x”8 1300121008Y Elbow 1x12”/2x10” 1300121010Y-elbow 2x”12/1x”8 1300121208Y elbow3x”12 1300121212

Y-ELBOW 4 WAYS

1x250-300 / 3x200 (1x10”-12” / 3x8”) 13112080808

STAGE CONNECTORSThe stage connectors allow to properly connect the flexible ducts and, in particular to connect to each other different diameter flexible ducts.

CODE#5” Reducer for Damper 6” 13020605Stage Connector 4”- “6 for flexible duct 13020604Connector “6 for flexible duct 13020606Connector “8 for flexible duct 13020808Connector “8 for flexible duct 130208081Stage Connector 8”-10” for flexible duct 13021008Stage Connector “6-8” for flexible duct 13020806Connector “10 for flexible duct 13021010Connector “12 for flexible duct 13021212Stage Connector from “6 up to 12”for flexible duct 13021206Connector 10”- “12 for flexible duct 13021210 Connector “14-14” for flexible duct 13021414

MULTIPURPOSE Y ELBOWS

300-250 / 2x250-200-150 mm(12”-10” / 2x10”-8”-6”) 130012100806350-250 / 2x300-250-200 mm (14”-10” / 2x12”-10”-8”) 130014121008

CO

33

DUCT MANIFOLDS

Duct manifolds are manufactured using corrosion-resistant ABS plastic. The insulating properties of this material prevent condensation making them ideal suited for use with heating/cooling air conditioning systems (temperature 0 to 65°C / 30 to 140°C). Frequently ordered models are manufactured by injection molding; other models made to answer customer specifications are produced by vacuum forming.Duct manifolds serve as the air conditioning system distribution box and are installed betweenmain ducts and flexible ducts or between A/C unit and flexible ducts. The duct manifolds are right-triangular shaped with air inlet at the base and flexible duct connections on the sides of the triangle. Each side can contain 1 to 4 connections of various sizes, thus allowing air distribution to between 2 to 6 end users.The inside of the manifold is lined with a polyethylene foam insulating sheet that covers all branch connections. Openings intended to be used must be cut out. Additional branches may be added later by opening closed outlets.

34

FLAT PLENUMS (FLAT HIGH & LOW CAPACITY) FOR A/C

CODE#Duct ma.FLAT 2X10”/4X8” 240X900mm LG 50-60 12564000Duct ma.FLAT-5x”8 260x1050mm 12530020102Duct ma.FLAT-4x”8 + 1/10” 270x1167mm 12531172748110Duct ma.FLAT- 485X800 mm 1253002023Duct ma.FLAT-4x”8 295X850 mm 125329585048Duct ma.FLAT-2x”8 /2x8” 285X850 mm 125300202Duct ma.FLAT-2x”10 125300606Duct ma.FLAT 10” 150X600 12531560100Duct ma.FLAT 2X8” 150X600 Fujisu 12531560280Duct ma.FLAT 2X10” 155X720 1253720155300Duct ma.FLAT 2X12” 220X767 125376722320Duct ma.FLAT 4x”8 /1x10” 285X1000 mm (with Damp.) 125310029481101Duct ma.FLAT 2x”8 /2x10” 285X850 mm 125300206Duct ma.FLAT 2x”8 /2x8” 235X885 mm 1253002021Duct ma.FLAT 2x”8 200X910 mm 1253910200280Duct Fujisu270X1140 mm 4X6”/8” 1X10”/12” 1X10”/8” ,125311427000Duct ma.FLAT 2x”8 /2x8” 300X960 mm 1253002022Duct ma.FLAT 5x”8 300X960 mm 1253002032Duct ma.FLAT 4x”8/10/12 300X930 mm 1253481012Duct ma.FLAT 3x”8 /1x10” 850x285mm 125300305Duct ma.FLAT 1x”12 /2x12” 850x285mm 125300607Duct ma.FLAT 3x”8 /1x8 / 1x8/10” “700x300mm(w.Damp.) 125330705810Duct ma.FLAT2x”8/6+1x10”+2X8” 700x300mm BFQ 50 ,1253307010468Duct ma.FLAT Daikin BFQ 60/70 12533095528810Duct ma.FLAT 1x”14 /1x14” 850x285mm 125300808Duct ma.FLAT 1000x300mm 1253030100Duct ma.FLAT 4x”8 /1x10” 1000x285mm 12531002948110Duct ma.FLAT 5x”8 /1x10” 1000x270mm 125311851553Duct ma.FLAT 3x”8 /1x10”/1x12” 1040x300mm 125330110381Duct ma.FLAT 3x”8 /1x10” 1000x300mm 12533010008310Duct ma.FLAT 1x”8 /3x10” 1000x300mm (with Damp.) 1253301008310Duct ma.FLAT 1x”12 1040x300mm 125330104120Duct ma.FLAT 2X8”+2X10” 1x”12 1040x300mm PEREG 1253301042821010Duct ma.FLAT 3X8”+1X10” 1x”12 1040x300mm 1253301043810120Duct ma.FLAT 3x”8 /3x8” 1000x300mm 12530301000303Duct ma.FLAT 4x”8 /4x8” 1000x300mm 12530301000404Duct ma.FLAT 4x”8 /2x10” 1000x300mm 12530301000406Duct ma.FLAT 5x”8 /1x10” 1000x300mm 125303010058110Duct ma.FLAT 3x”8 /10”/12” 1040x320mm 125332104381012Duct ma.FLAT 1180x320mm 12533711800Duct ma.FLAT 4x8”/4x10” 1180x320mm 12533711848410Duct ma.FLAT 4x8”/4x8” 1180x320mm 12533711888Duct ma.FLAT 2x14”/2x12” 1145x380mm 125338115212214Duct ma.FLAT 3x14”/1x12” 1110x580mm 12535811112314Other dimensions available on request.

35

MODULAR DUCT MANIFOLD

The modular duct manifolds are made of two halves with various options of connections. This revolutionary product enables to drastically reduce the storage space since both parts of the modular duct manifold are completing each other according to the installer needs.

Duct manifold ( Low CFM capacity ) Duct ma.-L.c 3x”6/3x”6 125000101Duct ma.-L.c 3x”6/2x”8 125000102Duct ma.-L.c 3x”6/1x”10 125000105Duct ma.-L.c 3x”6/1x”12 125000107Duct ma.-L.c 3x”6/3x”10 125000105Duct ma.-L.c 3x”6/1x”6+1X8” 125000121Duct ma.-L.c 3x”6/1x”6+1X 10” 125000122Duct ma.-L.c 3x”6/1x”8+1X 10” 125000123Duct ma.-L.c 2x”8/2x”8 125000202Duct ma.-L.c 2x”8/1x”10 125000205Duct ma.-L.c 1x”8/1x”8+1X 10” 1X 10” 125000206Duct ma.-L.c 2x”8/1x”12 125000207Duct ma.-L.c 2x”8/1x”6/1x8” 125000221Duct ma.-L.c 2x”8/1x”8/1x10” 125000223Duct ma.-L.c 1x”10/1x”10 125000505Duct ma.-L.c 1x”10/1x”12 125000507Duct ma.-L.c 1x”12/1x”12 125000707Duct ma.-L.c 1x”12/1x”8+1x10” 125000723

Duct manifold ( High CFM capacity ) Duct ma.-High.Cap. 3x”8/3x”8 125100303Duct ma.-h.c 4x”8/2x”10 125100406Duct ma.-h.c 3x”8/2x”8+1x10” 125100324

Duct ma.-h.c 4x”8/2x”8+1x10” 125100424Duct ma.-h.c 4x”8/2x”8+1x12” 125100425Duct ma.-h.c 4x”8/1x”10+1x12” 125100426Duct ma.-h.c 4x”8/4x”8 125100404Duct ma.-h.c 4x”8/2x”10 125100406Duct ma.-h.c 4x”8/2x”12 125100408Duct ma.-h.c 2x”10/2x”10 125100606Duct ma.-h.c 2x”10/2x”12 125100608Duct ma.-h.c 2x”10/1x”10+1x12” 125100626Duct ma.-h.c 2x”12/2x”12 125100808Duct ma.-h.c 1x”14/1x”14 125100909Duct ma.-h.c 4x”8/4x”8 (Tadiran) 125500404

Modular Duct. Ma. (Half Duct)Modular Duct. Ma. 3X8” (Half) 152003Modular Duct. Ma. 4X8” (Half) 1252004Modular Duct. Ma. 5X8” (Half) 1252005Modular Duct. Ma. 2X10” (Half) 1252006Modular Duct. Ma. 3X10” (Half) 1252007Modular Duct. Ma. 2X12” (Half) 1252008Modular Duct. Ma. 2X8”+1x10” (Half) 1252024Modular Duct. Ma. 2X8”+1x12” (Half) 1252025Modular Duct. Ma. 1X10”+1x12” (Half) 1252026

MANIFOLD EXTENSION AND FLOWING EQUALIZER

The manifold extension is lined with a polyethylene foam insulating sheet and has to be located between the evaporator and the duct manifold. It serves to centralize the air coming out of the evaporator. The flowing equalizer is located between the extension and the duct manifold and it serves for balancing the air distribution capacity

Manifold extension dim. 423x390x270 mmEqualizer dim. 440x392x1 mm

”T” TYPE DUCT MANIFOLD

The T Type Duct Manifold is used for better air distribution for two Zones. Adapters with various outlets are connected to the duct manifold.vvv

“T” plenum 12540000Plenum for connections diam. 200 (8”) 12042530080Plenum for connections diam. 250 (10”) 12042530100Plenum for connections diam. 300 (12”) 12042530120Plenum for 2 connections diam. 200 (2x8”) 12042530280

36

Plastic Footing for Out Door Unit

( Set of 4 Piece’s)

Code # 1205017

Elastic Bend

Code # Elastic Bend For Metal Tunnel 8” 12600812Elastic Bend For Metal Tunnel 10” 12601012Elastic Bend For Metal Tunnel 12” 12601212

FLEX BELT

The “Flexbelt” is a clever innovation Feature to hold the flexible duct to ceiling .It’s came as a Kit which include also the loop’s and twine’s .It can be use with any diameter and type of flexible .

Code #Flexbelt

CONCEALED ACCESS DOOR

General Code # 14199999Special products

MCONCEALED ACCESS DOOR

General Code # 14199999 *Order per size

FLOWING EQUALIZER ADAPTER FEATURE FOR STRIP LINE

This clever innovation Feature is for strip line adaptor , in order to provide an even air stream aboard the Strip line grill .By Putting this feature in any of the spigot, depending of the adaptor length .The Height is 97mm . no tools or glue required . easy and quick installation .

Code #h. 97 mm 11739997

is a clever innnovation

37

Twitoplast round the world

ALL THE REASONS

TO USE ™

L O N G L I F E P L A S T I C A I R C O N D I T I O N I N G A C C E S S O R I E S

BY

™

Complete range of top qual i ty & modular p last ic gr i l les , d i f fusers , Y e lbow, re turn a i r

gri l les, adapters, duct manifold, Opposed Blade dampers, manual and electric proportional

dampers, controls and thermostats for A/C and Zone control system, al l under one roof.

For the air conditioning and ventilation industry.Long life products even under harsh environmental conditions.Corrosion-resistant, no condensation.Reduce cost and time in installation.Light weight.Fine engineering and control for even air distribution to all zones.Manufactured by injection moulding, strong and scratch-resistant.Over 500 standard products.The standard color is white but other colors can be supplied forlarge quantities.

10 Nachshon St. Segula Industrial Zone,Petach Tikva 49277, ISRAEL

Tel: 972-3-9345888 Fax: 972-3-9042729e-mail:[email protected]

www.twitoplast.co.il39

9 D r e z n e r S t . S e g u l a I n d u s t r i a l Z o n e ,Petach Tikva 49277 , ISRAEL

Tel : +972-3 -9345888 Fax: +972-3 -9042729www.twitoplast.co.il e-mail: [email protected]

COMPONENTS AND ACCESSORIES FOR THE AIR … ?????.pdf · Return air grilles Ceiling diffusers...

Documents

Transcript of COMPONENTS AND ACCESSORIES FOR THE AIR … ?????.pdf · Return air grilles Ceiling diffusers...