Componeer™

Direct Composite VeneersInnovative and amazingly easy restoration of anterior teeth

2

COMPONEER are poylmerised, prefabricated nano-hybrid-composite enamel shells that combine the advantages of direct composite restoration with the advantages of prefab-ricated veneers. This is the first perfected system to allow amazingly easy restoration of anterior teeth with customised composite shells.

For innovative and amazingly easy restoration of anterior teeth

Componeer™

The New Direct Composite Veneering

System.

3

Advantages for the dentist:

• easyandefficienttouse

• onlyonesessionrequired

• qualitydentalrestorationswith

excellentaestheticresults

• noimpressionsorlaboratorynecessary

• optimumcustomisation

(choiceofcolour,highlightingshape

andstructure)

• economicalfordentistsandpatients

duetohighsuccessrateandefficiency

• highaddedvalue:thesolutionformany

patientswithreasonableinvestmentfor

the dentist

Goodreasonsforthepatient:

• Beautifulteethafteroneappointment

• minimallyinvasiveremovalofhealthy

toothsubstance

• reducedtreatmentstress

• customisedsolution

• highsurfaceandedgequality

• moreeconomicalthanindirectsolutions

With COMPONEER, quality aesthetic restoration of anterior teeth can be performed efficiently in just a single session. Until now the dentist could only choose between a directly mod-elled composite restoration or elaborate indirect veneer tech-nology. The Direct Composite Veneer System adds a new and interesting dimension to existing treatment options and gives dentists and patients new economic perspectives. Patients can be given a naturally aesthetic smile in just a single session, and set off smiling – with a “smile to go”.

The pre-shaped COMPONEER veneers are available in differ-ent sizes and are easy to use for single-tooth reconstruction as well as complete reconstruction in the anterior region. Time-consuming forming of the anatomical shape and surface and elaborate trimming are no longer required. COMPONEER can be customised to individual requirements with composite at any time.

Set off with a smile

4

Novel inner surface with micro-retentive structure for a permanent bond (24 MPa, see study "One Coat Bond" page 7).

From 0.3 mm veneer thickness. This allows a minimally invasive preparation.

COMPONEER-Technicaldata:

Bendingmodulus 9000MPaBendingstrength 127MPaWaterabsorption 16µg/mm3

Watersolubility 0.9µg/mm3

X-rayopacity 2mmAlVickershardness 73kg/mm2

Compressionstrength 392MPaSmallestparticlesize 20nmøparticlesizeoffiller 0.6µmFillercontentbyweight 80%Fillercontentbyvolume 65%Density 2.0g/mm3

(Reference: internal measurements)

5

Such perfection, even our development team had to smile with pride.

An easy-to-use product. A fantastic solution. A perfected system. COMPONEER, Direct Composite Veneers, are a completely new class of veneers. They are manufactured industrially from highly filled nano-hybrid-composite which ensures excellent homogeneity and stability of the enamel shells. The extremely thin veneer coatings from 0.3 mm allow a high level of con-servation of hard tooth substance during preparation. The shiny and naturally designed surface adds a look of vitality to the restoration.

The novel micro-retentive inner surface increases wettability and ensures a lasting bond. Special conditioning of the veneer is not necessary. All this makes COMPONEER a milestone in veneer technology. A well-thought-out range of instruments, as well as comprehensive information material for dentists and patients, round off the product line. This quickly gives the user the information required to perform attractive, natural restorations effectively and economically.

Maxilla (MX) small

13 12 11 21 22 23

Maxilla (MX) medium

43 42 41 31 32 33

Mandibula (MD) medium

Mandibula (MD) small

MX 13 12 11 21 22 23

mm Height x Width Height x Width Height x Width Height x Width Height x Width Height x WidthS 8,7 x 6,6 8,0 x 6,3 8,9 x 7,4 8,9 x 7,4 8,0 x 6,3 8,7 x 6,6M 9,6 x 7,3 8,9 x 7,0 9,9 x 8,2 9,9 x 8,2 8,9 x 7,0 9,6 x 7,3L 10,6 x 8,0 9,7 x 7,7 10,9 x 9,1 10,9 x 9,1 9,7 x 7,7 10,6 x 8,0

MD 43 42 41 31 32 33

mm Height x Width Height x Width Height x Width Height x Width Height x Width Height x WidthS 9,6 x 6,5 9,2 x 5,5 9,2 x 5,5 9,2 x 5,5 9,2 x 5,3 9,6 x 6,5M 10,6 x 7,3 10,2 x 5,9 10,2 x 6,1 10,2 x 6,1 10,2 x 5,9 10,6 x 7,3Maxilla (MX) large

6

SYNERGYD6andSYNERGYD6FlowThe universal nano composite is perfectly colour- matched to COMPONEER. The easy choice of shades, excel-lent modelling properties and high resistance to dental operating lights make this composite ideal for bonding veneers. SyNERgy D6 FlOW with its excellent flow properties, is available for contouring and adding that final touch.

OneCoatBondThis Total Etch Bond is a light-curing mono-component bonding agent. As COMPONEER is primarily bonded to enamel this is the ideal choice in adhesives. The bond is simply applied to the brush or COMPONEER via the syringe. Only one application layer is required due to the excellent wettability. Strong, permanent bonding forms the basis for invisible edges and long-life perfect aesthetics.

ComponeerTm HolderThe holder is a pair of specially designed holding tweez-ers which considerably simplify shape corrections to COMPONEER as well as the application of the bond. The interchangeable holder caps (black protective caps) protect the COMPONEER.

ComponeerTmPlacerAn instrument made by practising experts for expert practice: the placer is used to align and position the ve-neers correctly and without slipping.

ComponeerTmModellingInstrumentMB5The straight end of this instrument is exceptional in design and allows free rotation during treatment. The spatula end is extremely thin and sharp for cutting away excess composite.

ComponeerTmContourGuideThe unique bluish transparent contour guides permit precise contour conformity and, thus, selection of the right tooth shape. A total of 30 different shapes are available: 6 per size.

7

100

75

50

25

0

150

120

90

60

30

0

(Reference: measurements at the universities of Geneva/Zurich)

Total wear after 1,200,000 cycles (equates to 5 years in vivo)

Antagonist natural enamel

Restoration SYNERGY D6

Natural enamel

SYNERGYD6

Optimisedabrasionresistance The abrasion resistance of SyNERgy D6 is comparable to that of natural enamel and protects the opposing cusps.

OneCoatBond

StrongbondingvaluesOne Coat Bond only requires a single application step for perfect adhesion. COMPONEER in combination with One Coat Bond demonstrates excellent adhesion, on composite, enamel and dentin. This ensures reliable and long-lasting adhesion of the restoration. The adhesive strength of COMPONEER is considerably greater than that for ceramic veneers due to the special micro-retentive surface.

Three reasons to smile. Triple reliability.

30

25

20

15

0

(Reference: data on file)

COMPONEER Ceramic veneer ONE COAT BOND on dentine

ONE COAT BOND on enamel

Adhe

sive

stre

ngth

/ M

Pa

Componeer

TestingedgesealbyobservingdyepenetrationThe tightness of the edge seal after alternating mechanical and thermal load is outstanding. 92.5 % of all samples show-ed no dye penetration; 7.5 % showed only minimal discolo-ration on the edges. In other words, 100 % of the samples exhibited no or only minimal edge discoloration – a highly positive outcome. The adhesive retention also proved to be stress-resistant. No retention losses were seen.

(Source: Study conducted by the University of Geneva)

nodiscoloration

minimaldiscoloration

penetration up to 1.0 mm

penetration up to 0.5 mm

penetration> 1.0 mm

[%]

no edge discoloration – 92.5 %

minimal edge discoloration – 7.5 %

penetration up to 0.5 mm deep – 0 %

penetration up to 1.0 mm deep – 0 %

penetration > 1.0 mm deep – 0 %

µm

8

A smile for virtually all

occasions.Whether for incisor extensions, the covering of massive discolouration or the closing of diastemas, aesthetic corrections can be carried out easily and fast with COMPONEER. This closes the gap between time-consuming freehand and expensive invasive veneer techniques. Fractures, malposition or anatomical malformation can, of course, also be elegantly and perma-nently restored using the Direct Composite Veneer system. Especially in extensive reconstruction, the contralateral teeth can be efficiently set to symmetrical positions.

ClinicalIndications

Treatment of caries

1. Extensive cervical and interdental caries, discolouration of enamel, and slight malposition

2. Caries treated and homogenised anterior with COMPONEER

Optimisation of old restorations

1. Extensive old and insufficient restorations

2. Reconstructed function with COMPONEER

Attrition, abrasion, erosion

1. Edge-to-edge occlusion with abraded and broken anterior teeth with old restoration

2. Functional and aesthetic teeth with normal overjet constructed with COMPONEER

Tooth fracture

1. Loss of 1/3 of anterior tooth by fracture

2. Simplified shaping and construction with COMPONEER

9

Aesthetic/cosmeticIndications

Cosmetic correction

1. Intrinsic, non-bleachable yellow discoloura-tion and slightly too short teeth

2. Brightened teeth with COMPONEER

Malposition

1. Extensive malposition with crowding

2. Axially aligned correction and repositioning with COMPONEER

Extending incisors

1. Slightly shortened incisal edge with moderate malposition

2. The tooth proportions are reconstructed and aligned with COMPONEER

Discolouration

1. Extensive discolouration of enamel and dentine, cervical lesions

2. Restored function and aesthetics with COMPONEER

Anatomical malformation

1. Unevenly shaped teeth, conical tooth, diastema and malposition

2. Alignment of teeth, also to lip, with COMPONEER

Diastema

1. Diastema and anterior teeth too long

2. Gap closure and realignment with COMPONEER

10

Componeer™

So easy to use

it makes you smile.Benefitsforpatients&dentists

Whether for an individual tooth or total reconstruction, COMPONEER is an easy-to-use and safe concept covering a wide variety of indications. Patients benefit from permanent direct restoration treatment and dentists have new efficient treatment options.

Clinicalcasestudies

1. Old composite veneers with insufficient edges

1. 11 with enamel fractures, demineralisation and old com-posite treatment

2. Removal of old composite and etching of teeth

2. Minimally invasive preparation

3. Teeth aligned with COMPONEER to contours of up-per and lower lip

3. Optimal brightness in spite of marked surface structure

4. Individualised characteristics in spite of contralateral symmetry of COMPONEER

4. Optimal marginal adaptation at smallest layer thickness

11

Propertiesinclinicaluse

COMPONEER is a complete well-thought-out system. All auxiliary tools have been specially developed and matched to ensure easy and safe use.

3. The perfectly matching COMPONEER is selected using the bluish transpar-ent Contour Guides

4. Rubberdam adhesion technique facilitates func-tional working

8. Final check for perfect edges before removing the rubberdam

7. The composite is distrib-uted on the tooth using the MB5 modelling instru-ment. The placer is used for stress-free application of the COMPONEER to its final position.

6. Careful grinding of the COMPONEER to give an exact fit

9. Situation after two weeks

1. Initial situation: discoloured teeth, exten-sive caries, malposition, incorrect axial alignment

2. Select enamel and dentine shade with shade guide prior to isolation, ideally under daylight lamp

5. Prior to opening the sealed COMPONEER, the shape is verified again following preparation

12

1308

1300

1304

1310

SYSTem KITS Tips Syringes

ComponeerTm premIUm System Kit

84ComponeerTm:

each upper Set: 11, 12, 13, 21, 22, 23

each lower Set: 31, 32, 33, 41, 42, 43

1 COMPONEERTM Set upper S - Enamel Universal

2 COMPONEERTM Set upper M - Enamel Universal

2 COMPONEERTM Set upper L - Enamel Universal

1 COMPONEERTM Set upper S - Enamel White Opalescent

2 COMPONEERTM Set upper M - Enamel White Opalescent

2 COMPONEERTM Set upper L - Enamel White Opalescent

1 COMPONEERTM Set lower S - Enamel Universal

1 COMPONEERTM Set lower M - Enamel Universal

1 COMPONEERTM Set lower S - Enamel White Opalescent

1 COMPONEERTM Set lower M - Enamel White Opalescent

1 COMPONEERTM Accessory Set / Material (see 1308 / 1309)

1 COMPONEERTM Accessory Set / Instruments (see 1310)

1300 1301

ComponeerTm premIUm Set Kit

84 COMPONEERTM (see PREMIUM System Kit)

COMPONEERTM Accessory Set / Material

1302 1303

ComponeerTmBASICSystem-Kit

36ComponeerTm:

each upper Set: 11, 12, 13, 21, 22, 23

each lower Set: 31, 32, 33, 41, 42, 43

1 COMPONEERTM Set upper M - Enamel Universal

1 COMPONEERTM Set upper L - Enamel Universal

1 COMPONEERTM Set upper M - Enamel White Opalescent

1 COMPONEERTM Set upper L - Enamel White Opalescent

1 COMPONEERTM Set lower M - Enamel Universal

1 COMPONEERTM Set lower M - Enamel White Opalescent

1 COMPONEERTM Accessory Set / Material (see 1308 / 1309)

1 COMPONEERTM Accessory Set / Instruments (see 1310)

1304 1305

ComponeerTmBASICSetKit

36 COMPONEERTM (see PREMIUM System Kit)

COMPONEERTM Accessory Set / Material (see 1308 / 1309)

1306 1307

ComponeerTmAccessorySet/Material

COMPONEERTM Contour Guide, 1 each size (upper S, M, L, lower S, M)

One Coat Bond (1 x 1.2 ml), Etchant Gel S (1 x 2.5 ml),

SYNERGY D6 Dentin A1/B1, A2/B2;

SYNERGY D6 Enamel White Opalescent, Enamel Universal

(each colour: 10 x 0.25 g Tips; 1 x 4 g Syringe)

1 Shade Guide COMPONEER-SYNERGY D6, SYNERGY D6 Flow;

15 Bent Appl. Needles "Flow"

1308 1309

ComponeerTmAccessorySet/Instruments

1 MB5 Modelling Instrument; 1 Holder and 10 Holder Caps; 1 Placer,

2 Placer Adapters, 10 Placer Stamps; Brushholder black and 1 pack

brushes x 50 pcs; Comprepol Plus Cup and Point, Composhine Plus

Cup and Point (1 pc. each); SwissFlex Trial Kit (1 Mandrel, 11 Discs)

1310

13

ComponeerTm SeTS AnD reFILLSenamel

WhiteOpalescent

enamel

Universal

COMPONEERTM Set upperS, 6 Veneers: 11, 12, 13, 21, 22, 23 1311 1316

COMPONEERTM Refill upperS, 2 Veneers 11 1321 1351

12 1322 1352

13 1323 1353

21 1324 1354

22 1325 1355

23 1326 1356

COMPONEERTM Set upperM, 6 Veneers: 11, 12, 13, 21, 22, 23 1312 1317

COMPONEERTM Refill upperM, 2 Veneers 11 1327 1357

12 1328 1358

13 1329 1359

21 1330 1360

22 1331 1361

23 1332 1362

COMPONEERTM Set upperL, 6 Veneers: 11, 12, 13, 21, 22, 23 1313 1318

COMPONEERTM Refill upperL, 2 Veneers 11 1333 1363

12 1334 1364

13 1335 1365

21 1336 1366

22 1337 1367

23 1338 1368

COMPONEERTM Set lowerS, 6 Veneers: 31, 32, 33, 41, 42, 43 1314 1319

COMPONEERTM Refill lowerS, 2 Veneers 31 1339 1369

32 1340 1370

33 1341 1371

41 1342 1372

42 1343 1373

43 1344 1374

COMPONEERTM Set lowerM, 6 Veneers: 31, 32, 33, 41, 42, 43 1315 1320

COMPONEERTM Refill lowerM, 2 Veneers 31 1345 1375

32 1346 1376

33 1347 1377

41 1348 1378

42 1349 1379

43 1350 1380

14

6001 1105

6001 1107

6001 1110

COMPOSITESANDBONDINGS

One Coat Bond, 1.2 ml 7879

Etchant Gel S, 2.5 ml 7373

SYNERGYD6Tips

(eachtipcontains0.25g;

10tips/pack)

Syringes(eachsyringecontains

4.0g;1syringe/pack)

Dentin White Bleach 8375 8365

Dentin A1/B1 8376 8366

Dentin A2/B2 8377 8367

Dentin A3/D3 8378 8368

Dentin A3.5/B3 8379 8369

Dentin C2/C3 8380 8370

Dentin A4/C4 8383 8384

Enamel White Opalescent 8382 8371

Enamel Universal 8381 8372

SYNERGYD6FLOW(1Syringe/pack,2.3geach)

A1/B1 7651

A2/B2 7652

A3/D3 7653

A3.5/B3 7654

A4/C4 7655

White Bleach 7656

Enamel Universal 7657

SYNERGY D6 FLOW Needles, 1 pack/20 pcs. 8469

Shade Guide COMPONEERTM-SYNERGY D6, 1 pc. 60011113

Dispenser for Composite Tips, 1 pc. 6671

INSTRuMENTS/ACCESSORIES

MB5 Modelling Instrument, 1 pc. 60011110

Holder, 1 pc. 60011105

Holder Cap, 40 pcs. 60011106

Placer, 1 pc. 60011107

Placer Adapter, 5 pcs. 60011108

Placer Stamp, 50 pcs. 60011109

Brushholder black, 1 pc. 60011111

Brushes, 1 pack: 50 pcs. 60011112

COMPONEERTM Contour Guide 5 Sizes, 1 each size upper small 7000

upper medium 7001

upper large 7002

lower small 7003

lower medium 7004

Comprepol Plus, Cup, 5 pcs. 2311RA

Composhine Plus, Cup, 5 pcs. 2411RA

Comprepol Plus, Point, 5 pcs. 2303RA

Composhine Plus, Point, 5 pcs. 2403RA

SwissFlex Trial Kit 250098AA

14

15

All you need for a successful start.

Patientbrochureposter DVD and CD

ComponeerTM promotional Items

Everything you need for applying COMPONEER is included in the compact COMPONEERTM System Kit.

The ComponeerTMBoxA smile for immediate ordering

ContourGuideOneCoatBondSYNERGYD6(tipsorsyringe)intheshadesdentinA1/B1anddentinA2/B2aswellasenamelW/OandenameluniversalSYNERGYD6FLOWwithapplicationneedlesVariouspolishersAccessoriesComponeerTm HolderComponeerTmPlacerMB5ModellingInstrument

ComponeerTM-DirectCompositeVeneers

15

Coltène/WhaledentAGFeldwiesenstr. 20 9450 Altstätten/SwitzerlandTel. + 41 71 757 53 00Fax + 41 71 757 53 01info@coltenewhaledent.ch 92

41 E

N 0

2-11

Coltène/WhaledentInc.235 Ascot ParkwayCuyahoga Falls, Ohio 44223/USATel. + 1 330 916 8800Fax + 1 330 916 7077info@coltenewhaledent.com

Make your patients smile.

With ComponeerTM by Coltène/Whaledent. If you require further INFORMATION or wish to place an order, our sales team is always at your service.

Simply visit us at: www.componeer.info

DrMarioBesek“The new COMPONEER Veneer System for the restoration of anterior teeth extends treatment options by combining the advantages of minimally invasive composite res-toration and laboratory-made veneer technology. The advanced system offers patients and dentists new economical perspectives, all in just a single session.”

Coltène/WhaledentLtd. The President Suite A Kendal House, Burgess Hill Victoria Way West Sussex, RH15 9NF/U.K. Tel. + 44 1444 235486 Fax + 44 1444 870640 info@coltenewhaledent.co.uk