COMPETENT SCAFFOLD INSPECTOR TRAINING

4
Certified Competent Person / Inspector Training In Association with Scaffold Training Institute (STI), Texas, USA COMPETENT SCAFFOLD INSPECTOR TRAINING Scaffold Training Institute *1st batch Exclusively for Murugappa Group

Transcript of COMPETENT SCAFFOLD INSPECTOR TRAINING

Page 1: COMPETENT SCAFFOLD INSPECTOR TRAINING

Certified Competent Person / Inspector TrainingIn Association with

Scaffold Training Institute (STI), Texas, USA

COMPETENT SCAFFOLD INSPECTOR TRAINING

Scaffold Training Institute*1st batch Exclusively for Murugappa Group

Page 2: COMPETENT SCAFFOLD INSPECTOR TRAINING

Competent Person / Inspector of Scaffolds* This person may perform work while on a scaffold, perform the job site inspection, and be designated as the competent person.

th th th thDates : 8 ,9 ,10 ,11 December 2021Time : 10:00am – 05:00 pm

Venue : Murugappa Polytechnic College, Sathyamurthy Nagar, Avadi, Chennai 600062

Who Should Attend Engineers (Construction, Maintenance, HSE), Foreman, Supervisors, Officers and Scaffolding Technician

EligibilityMinimum 5-7 years in the field of Construction Safety

Course Conducted bySTI Certified Trainers

Certifying body and Curriculum based uponScaffolding Training Institute ( STI), Texas , USA No of days4 days

PROGRAM DETAILS

*as per STI

Page 3: COMPETENT SCAFFOLD INSPECTOR TRAINING

DAY1

• Introduction to Scaffolds

• Scaffolding Terminology and Different Types of Scaffolds

• Materials Inspection

• Fall Protection • Accepted

International Code

• Scaffold Foundations

• Stability & Integrity

• Working Platform• Manual Handling• Ladder & Access• Procedures for

Erection & Dismantling

DAY2

DAY3

DAY4

• Material Take Off• Design of Scaffolds • Basic Load

Calculation• Practical Session:

Scaffold Erection

• Practical Session: Scaffold Inspection

• Practical Session: Scaffold Dismantling

• Final Assessment • Review of

Assessment

Fees`42,500* INR plus GST

COURSE OUTLINE

Discount10% Discount for Multiple nominations

Note: This is a non residential program ; the training fee includes training charges, participant manual. Lunch and refreshments on days of training and Certificate.

Person should undertake to follow Covid-19 related protocols on social distancing, wearing masks and hand sanitization during the duration of the program.

RT-PCR test results taken within 72 hours of program start date should be shown on the 1st day of the program.

Temperature will be taken at regular intervals during the program and person with temperature above normal body temperature will not be permitted to attend further.

thLast date of registration and fee payment: 4 December 2021

*as inclusive of royalty charges to STI

Page 4: COMPETENT SCAFFOLD INSPECTOR TRAINING

CURRICULUM IN DETAIL

Module One: (Classroom)This “Competent Person” course provides detailed instruction in Scaffold hazard recognition and common safety issues including a thorough discussion of OSHA regulations 29 CFR Subpart L-Scaffolding & BS-EN Standard requirements.

The purpose of this course is to provide Scaffold Erectors & Inspectors with the regulations, safety guidelines and procedures needed to recognize and eliminate hazards in the field.

Focus will also be given to understanding terminologies being used in Scaffolding, various types of couplers & its usage, various types of bracing, Scaffold Measurements, Inspection of Scaffold materials and detailed measures to prevent fall of men and materials from Scaffolds.

Enabling objectives include specifying General Requirements for Tube & Coupler Scaffolds and System Scaffolds.

Module Two: (Classroom)This module deals with the selection of good foundation, Base plates , Treader plates, Base lifts, Near Excavation, Bracing, Ties, Raker, Outrigger, Guys, Construction method of working platform, Gaps in working platform, Protection in working platform, Inspection of lifting equipment. How to lift & lower Scaffold materials, Various types of knots, Hierarchy of Scaffold access, Condition, Position, Clearances & Usage of Ladders and procedure of step by step Scaffold erection. procedure.

Module Three: (Classroom + Practical) This module deals with basic Scaffold design & loading, how to calculate the weight of Scaffolds, Basic design concepts and hands on training outside yard in Step by step Scaffold erection includes, effective tool box talk, how to inspect the base foundation area, inspect the area before erection of Scaffolds, how to straighten the Scaffold by bracings, safe method for Scaffolder anchoring point during Scaffold erection, Laying the planks as per standard requirements, and Techniques used to construct the guardrails.

Module Four: (Classroom + Practical) This module deals with the continuing of hands on training outside yard, responsibility of Scaffold supervisor & inspector, uses of Scaffold tags and how to fill Scaffold tags, methodology to carryout Scaffold stagewise inspection and deliver reports, suggestions to provide rectifications, Preparing of log register, and step by step Scaffold dismantling activity which includes the correct sequences to be adopted during Scaffold dismantling activities and arrange the materials In a correct way.

For Brochures Contact: South: Mr.Rishabh - 9384673101 North and East : Ms.Ragini - 9384673102 West : Ms.Swati - 9384673103Academy: Mr.Saran - 96291 82413

Chola MS Risk Services Limited, GEE GEE Universal, 6th Floor, No 2, Mc.Nicholas Road, Chetpet, Chennai – 600031

Ms. Jolly RynjahHead – Chola MS Safety Academy98400 [email protected]