COMPARISON TABLE Doors... · reactive edge banding machinery and ABS colour ... During the warranty...

2
CREATE FLAWLESS CABINETRY WITH STYLELITE® ENVIRONMENT StyleLite is fully recyclable by mechanical means. StyleLite sheet is manufactured and then laminated without the use of any VOC’s or other harmful emmisions.StyleLite is hygenic and does not promote bacterial growth or transmission. XTREME StyleLite® doors provide a far superior surface finish compared with laminates, two pack or vinyl. With the use of state-of-the-art polyurethane reactive edge banding machinery and ABS colour matched edge, a near seamless appearance can be achieved, allowing us to deliver the most advanced high-gloss doors in the industry. StyleLite® is an Australian made premium Ultra high-gloss finish board that is fully recyclable. StyleLite® provides a deep high-gloss mirror like surface without ripples or orange peel, StyleLite® is UV and colour fade protected to combat harsh Australian conditions. StyleLite® will not chip or delaminate but most of all is easy to clean and maintain making it the preferred choice for Interior Designers, Architects and Kitchen Manufacturers. StyleLite® is laminated using a world class polyurethane reactive hot melt bonding system allowing us to deliver unsurpassed adhesion that is highly resistant to heat and moisture. SETTING A HIGH STANDARD XTREME DOOR GUARANTEE Xtreme Doors warrants all StyleLite® products for a period of 7 years. During the warranty period if a defect is apparent from manufacturing or material faults and not from miss useor abuse Xtreme Doors will replace the item to the best of their ability. (02) 4285 9361 (02) 4285 9305 [email protected] 70-74 Jardine Street , Fairy Meadow, NSW 2519 COMPARISON TABLE Board Type / Feature Xtreme StyleLite® Doors Two Pack Paint / Lacquer Surface finish • Highest gloss level achievable (>90%) • Consistent surface finish • No orange peel, no ripples • Moderate gloss level • Inconsistent appearance • Sanding marks and varying levels of orange peel are common Durability • Easy to repair • Moderate impact resistance • Chips easily • Difficult to repair Consistency • Highest level of consistency • Stringent quality standards ensures highest level of consistency across doors • Visual inspection of every panel during process • Mostly manual application results in poor consistency • Varies with each batch • Difficult to rematch later Warranty • 7 year indoor warranty • Subject to the vendor Phone Fax Email Address WWW.XTREMEDOORS.COM.AU MIRROR GLOSS DOORS DISTRIBUTED BY www.xtremedoors.com.au

Transcript of COMPARISON TABLE Doors... · reactive edge banding machinery and ABS colour ... During the warranty...

CREATE FLAWLESS CABINETRY WITH STYLELITE®

ENVIRONMENTStyleLite is fully recyclable by mechanical means. StyleLite sheet is manufactured and then laminated without the use of any VOC’s or other harmful emmisions.StyleLite is hygenic and does not promote bacterial growth or transmission.

XTREME StyleLite® doors provide a far superior surface finish compared with laminates, two pack or vinyl. With the use of state-of-the-art polyurethane reactive edge banding machinery and ABS colour matched edge, a near seamless appearance can be achieved, allowing us to deliver the most advanced high-gloss doors in the industry.

StyleLite® is an Australian made premium Ultra high-gloss finish board that is fully recyclable. StyleLite® provides a deep high-gloss mirror like surface without ripples or orange peel, StyleLite® is UV and colour fade protected to combat harsh Australian conditions. StyleLite® will not chip or delaminate but most of all is easy to clean and maintain making it the preferred choice for Interior Designers, Architects and Kitchen Manufacturers.

StyleLite® is laminated using a world class polyurethane reactive hot melt bonding system allowing us to deliver unsurpassed adhesion that is highly resistant to heat and moisture.

SETTING A HIGH STANDARD

XTREME DOOR GUARANTEEXtreme Doors warrants all StyleLite® products for a period of 7 years. During the warranty period if a defect is apparent from manufacturing or material faults and not from miss useor abuse Xtreme Doors will replacethe item to the best of their ability.

(02) 4285 9361

(02) 4285 9305

[email protected]

70-74 Jardine Street , Fairy Meadow, NSW 2519

COMPARISON TABLE

Board Type / Feature Xtreme StyleLite® Doors Two Pack Paint / Lacquer

Surface finish

• Highest gloss level achievable

(>90%)

• Consistent surface finish

• No orange peel, no ripples

• Moderate gloss level

• Inconsistent appearance

• Sanding marks and varying

levels of orange peel are

common

Durability• Easy to repair

• Moderate impact resistance

• Chips easily

• Difficult to repair

Consistency

• Highest level of consistency

• Stringent quality standards ensures

highest level of consistency across

doors

• Visual inspection of every panel

during process

• Mostly manual application

results in poor consistency

• Varies with each batch

• Difficult to rematch later

Warranty • 7 year indoor warranty • Subject to the vendor

Phone

Fax

Email

Address

WWW.XTREMEDOORS.COM.AU

M I R R O R G L O S S D O O RS

DISTRIBUTED BY

www.xtremedoors.com.au

1mm Colour matched ABS square doors seamlessly adhered using state of the art PUR technology creating a simplistic finish.

The PREMIER handle free door, featuring a visually unsurpassed subtle handle solution.

SQUARE DOORS PHANTOMSHARKFIN PHOENIXSTYLEGLAZE PHOENIX CONTRASTThe latest handle free creation.This engineered, streamline design allows a seamless rollededge which can be created in ANY of the extensive solid & metalic StyleLite® colour range.

The ULTIMATE handle free door.A streamline aluminium rail provides a simplistic sophisticated handle solution.

The complete glass door solution, featuring near flushmounted glass creating seamless appeal. Available with all xtreme door insert options.

Be creative with your door design by adding a contrastingStyleLite® colour into the streamline Phoenix rail creating an illusion of depth .

StyleLite® is laminated using WORLD CLASS, PUR (polyurethane) hot melt bonding system

CREATE FLAWLESS CABINETRY WITH STYLELITE®

Due to the nature of the printing process, the colours and images depicted throughout this brochure may vary compared to the actual finished products’ colour. Images

and colours are to be used as a guide only.

*Also available in Velvet matte finish

DOOR OPTIONS

SUPERIOR FEATURES

• Available in High Gloss and Velvet (matte) finishes

• Very easy to clean and maintain • UV and colour change protected

7 Year Indoor Warranty• Repairable surface that won’t chip,

crack or delaminate

DOOR OPTIONS