Company Standards and Specials€¦ · mold base manufacturer. BMS will also provide special mold...
Transcript of Company Standards and Specials€¦ · mold base manufacturer. BMS will also provide special mold...
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693
1009OSIdeifitreCynapmoC
Mold BasesStandards and Specials
BMS has been supplying mold bases to the plasticsindustry since 1976. We were the first to bring ourcustomers “customized standards”, that allow therelocation or omission of any part of the base. Thisallows you unprecedented freedom to design yourjob around your requirements and not those of amold base manufacturer. BMS will also providespecial mold bases built to your requirements.This includes special sizes, metals and custommachining options.
BMS can also provide machining for the following:• Non-standard mold base configurations.• Rough and finished pockets.• Hot runner systems.• Water lines and water pipe clearance.• Side locks and tapered interlocks.• Support pillar clearance and installation.• Cam pin location and clearance.• Ejector and core pin clearance.
When dealing with BMS you can expect:• Prompt Quotations,• Competitive Prices,• Quality Workmanship,• On-Time Delivery.
158
ORDER TOLL FREE
1-800-345-76931061 Industrial Parkway, Medina, Ohio 44256, U.S.A.
Phone: 330-722-1182 • Toll Free: 800-345-7693Fax: 330-725-2723 • Toll Free Fax: 800-581-9264
E-mail: [email protected]
Mold Base Assembliesand Steel Specifications
1009OSIdeifitreCynapmoC
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693160
Mold Base 10-7/8 x 141009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 14", 18" or 23-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693161
Mold Base 10-7/8 x 141009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
2/1-2 61/31
3 61/5-1
2/1-3 61/31-1
4 61/5-2
2/1-4 61/31-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 2/1-2 013
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 2/1-2 033
8/7-1 3 8/3-1 3 8/7 2/1-2 063
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 083
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 014
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 034
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 064
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 084
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 2/1-3 005
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 025
8/7-3 4 8/3-3 4 8/7-2 4 045rofllaC
ecirPdna
yrevileD
8/7-3 2/1-4 8/3-3 4 075
8/7-3 2/1-4 095
Call for Current Pricing - We Want Your Business!
When dealing with BMS you can expect:
• Prompt Quotations •• Competitive Prices •
• Quality Workmanship •• On-Time Delivery •
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693162
Mold Base 10-7/8 x 181009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 18", 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693163
Mold Base 10-7/8 x 181009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
2/1-2 61/31
3 61/5-1
2/1-3 61/31-1
4 61/5-2
2/1-4 61/31-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 2/1-2 093
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 2/1-2 034
8/7-1 3 8/3-1 3 8/7 2/1-2 064
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 094
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 025
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 065
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 095
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 016
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 2/1-3 046
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 076
8/7-3 4 8/3-3 4 8/7-2 4 007rofllaC
ecirPdna
yrevileD
8/7-3 2/1-4 8/3-3 4 037
8/7-3 2/1-4 067
Call for Current Pricing - We Want Your Business!
When dealing with BMS you can expect:
• Prompt Quotations •• Competitive Prices •
• Quality Workmanship •• On-Time Delivery •
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693164
Mold Base 10-7/8 x 23-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693165
Mold Base 10-7/8 x 23-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
2/1-2 61/31
3 61/5-1
2/1-3 61/31-1
4 61/5-2
2/1-4 61/31-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 2/1-2 025
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 2/1-2 065
8/7-1 3 8/3-1 3 8/7 2/1-2 006
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 056
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 086
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 3 8/7 3 037
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 077
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 008
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 2/1-3 048
8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 088
8/7-3 4 8/3-3 4 8/7-2 4 019rofllaC
ecirPdna
yrevileD
8/7-3 2/1-4 8/3-3 4 069
8/7-3 2/1-4 0001
Call for Current Pricing - We Want Your Business!
When dealing with BMS you can expect:
• Prompt Quotations •• Competitive Prices •
• Quality Workmanship •• On-Time Delivery •
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693166
Mold Base 11-7/8 x 121009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 12", 15", 20", 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693167
Mold Base 11-7/8 x 121009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/3-1
2/1-3 61/11-1
4 61/3-2
2/1-4 61/11-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 003
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 023
8/7-1 3 8/3-1 3 8/7 3 043
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 063
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 083
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 014
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 034
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 064
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 084
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 005
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 025
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 045
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 065
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 085
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 006
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 026
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 046
8/7-5 2/1-4 8/3-4 2/1-4 066
8/7-5 2/1-4 8/7-4 2/1-4 086
8/7-5 2/1-4 027
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693168
Mold Base 11-7/8 x 151009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 15", 20", 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693169
Mold Base 11-7/8 x 151009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/3-1
2/1-3 61/11-1
4 61/3-2
2/1-4 61/11-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 073
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 004
8/7-1 3 8/3-1 3 8/7 3 024
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 064
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 084
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 015
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 045
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 075
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 006
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 026
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 056
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 076
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 007
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 027
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 057
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 077
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 008
8/7-5 2/1-4 8/3-4 2/1-4 028
8/7-5 2/1-4 8/7-4 2/1-4 058
8/7-5 2/1-4 009
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693170
Mold Base 11-7/8 x 201009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 20", 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693171
Mold Base 11-7/8 x 201009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/3-1
2/1-3 61/11-1
4 61/3-2
2/1-4 61/11-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 094
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 035
8/7-1 3 8/3-1 3 8/7 3 065
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 006
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 046
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 086
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 017
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 067
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 097
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 028
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 068
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 098
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 039
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 069
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 099
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0301
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0601
8/7-5 2/1-4 8/3-4 2/1-4 0901
8/7-5 2/1-4 8/7-4 2/1-4 0311
8/7-5 2/1-4 0911
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693172
Mold Base 11-7/8 x 23-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 7/8" or 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-1/2" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693173
Mold Base 11-7/8 x 23-1/2ekortSrotcejE
"C" ekortS
3 61/3-1
2/1-3 61/11-1
4 61/3-2
2/1-4 61/11-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 085
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 026
8/7-1 3 8/3-1 3 8/7 3 066
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 017
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 057
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 008
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 048
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 098
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 039
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 079
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 0101
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0501
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0901
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0311
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0711
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0121
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0521
8/7-5 2/1-4 8/3-4 2/1-4 0821
8/7-5 2/1-4 8/7-4 2/1-4 0231
8/7-5 2/1-4 0041
1009OSIdeifitreCynapmoC
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693174
Mold Base 13-3/8 x 151009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 15", 18", 20-3/4", 23-1/2" or 26"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693175
Mold Base 13-3/8 x 151009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 043
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 073
8/7-1 3 8/3-1 3 8/7 3 093
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 034
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 064
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 005
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 025
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 065
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 095
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 026
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 046
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 076
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 007
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 037
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 067
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 097
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 018
8/7-5 2/1-4 8/3-4 2/1-4 048
8/7-5 2/1-4 8/7-4 2/1-4 078
8/7-5 2/1-4 039
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693176
Mold Base 13-3/8 x 181009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 18", 20-3/4", 23-1/2" or 26"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693177
Mold Base 13-3/8 x 181009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 014
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 044
8/7-1 3 8/3-1 3 8/7 3 074
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 025
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 055
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 006
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 036
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 076
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 017
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 047
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 087
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 018
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 048
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 088
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 019
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 059
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 089
8/7-5 2/1-4 8/3-4 2/1-4 0201
8/7-5 2/1-4 8/7-4 2/1-4 0501
8/7-5 2/1-4 0211
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693178
Mold Base 13-3/8 x 20-3/41009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 20-3/4", 23-1/2", 26" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693179
Mold Base 13-3/8 x 20-3/41009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 085
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 026
8/7-1 3 8/3-1 3 8/7 3 066
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 017
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 057
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 008
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 048
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 098
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 039
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 079
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 0101
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0501
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0901
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0311
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0711
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0121
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0521
8/7-5 2/1-4 8/3-4 2/1-4 0821
8/7-5 2/1-4 8/7-4 2/1-4 0231
8/7-5 2/1-4 0041
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693180
Mold Base 13-3/8 x 23-1/2
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-1/2", 26", 29-1/2" or 35-1/2"
1009OSIdeifitreCynapmoC
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693181
Mold Base 13-3/8 x 23-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 066
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 017
8/7-1 3 8/3-1 3 8/7 3 057
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 018
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 058
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 019
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 059
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0101
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0601
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0011
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 0411
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0911
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0321
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0821
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0231
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0731
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0141
8/7-5 2/1-4 8/3-4 2/1-4 0641
8/7-5 2/1-4 8/7-4 2/1-4 0051
8/7-5 2/1-4 0951
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693182
Mold Base 13-3/8 x 261009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 26", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693183
Mold Base 13-3/8 x 261009OSIdeifitreCynapmoC
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 037
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 087
8/7-1 3 8/3-1 3 8/7 3 038
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 098
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 049
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0101
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0501
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0211
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0711
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0221
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 0721
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0231
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0631
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0141
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0641
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0151
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0651
8/7-5 2/1-4 8/3-4 2/1-4 0161
8/7-5 2/1-4 8/7-4 2/1-4 0661
8/7-5 2/1-4 0671
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693184
Mold Base 13-3/8 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693185
Mold Base 13-3/8 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 038
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 098
8/7-1 3 8/3-1 3 8/7 3 049
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0101
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0701
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0411
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0021
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0721
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0331
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0831
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 2/1-3 0441
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0941
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0551
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0161
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0661
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0271
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0771
8/7-5 2/1-4 8/3-4 2/1-4 0381
8/7-5 2/1-4 8/7-4 2/1-4 0881
8/7-5 2/1-4 0002
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693186
Mold Base 14-7/8 x 17-7/81009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 17-7/8", 23-3/4", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693187
Mold Base 14-7/8 x 17-7/81009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 006
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 046
8/7-1 3 8/3-1 3 8/7 3 086
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 027
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 067
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 018
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 058
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 098
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 039
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 079
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0101
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0501
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0801
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0211
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0611
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0021
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0421
8/7-5 2/1-4 8/3-4 2/1-4 0721
8/7-5 2/1-4 8/7-4 2/1-4 0131
8/7-5 2/1-4 0931
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693188
Mold Base 14-7/8 x 23-3/41009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-3/4", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693189
Mold Base 14-7/8 x 23-3/41009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 087
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 048
8/7-1 3 8/3-1 3 8/7 3 098
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 059
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0001
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0601
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0111
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0811
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0321
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0821
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0331
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0831
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0341
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0841
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0351
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0851
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0361
8/7-5 2/1-4 8/3-4 2/1-4 0861
8/7-5 2/1-4 8/7-4 2/1-4 0371
8/7-5 2/1-4 0381
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693190
Mold Base 14-7/8 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693191
Mold Base 14-7/8 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0401
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0011
8/7-1 3 8/3-1 3 8/7 3 0611
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0421
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0031
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0831
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0441
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0251
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0851
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0561
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0171
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0771
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0381
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0981
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0691
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0202
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0802
8/7-5 2/1-4 8/3-4 2/1-4 0412
8/7-5 2/1-4 8/7-4 2/1-4 0122
8/7-5 2/1-4 0332
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693192
Mold Base 15-7/8 x 161009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 16", 20", 23-1/2", 26" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693193
Mold Base 15-7/8 x 161009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 075
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 006
8/7-1 3 8/3-1 3 8/7 3 046
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 086
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 027
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 067
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 008
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 048
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 088
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 019
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 059
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 099
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0201
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0601
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0901
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0311
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0711
8/7-5 2/1-4 8/3-4 2/1-4 0021
8/7-5 2/1-4 8/7-4 2/1-4 0421
8/7-5 2/1-4 0131
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693194
Mold Base 15-7/8 x 201009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 20", 23-1/2", 26" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693195
Mold Base 15-7/8 x 201009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 027
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 077
8/7-1 3 8/3-1 3 8/7 3 028
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 078
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 029
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 079
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0201
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0801
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0211
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0711
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0121
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0621
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0131
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0531
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0041
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0441
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0941
8/7-5 2/1-4 8/3-4 2/1-4 0451
8/7-5 2/1-4 8/7-4 2/1-4 0851
8/7-5 2/1-4 0761
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693196
Mold Base 15-7/8 x 23-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-1/2", 26", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693197
Mold Base 15-7/8 x 23-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 038
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 098
8/7-1 3 8/3-1 3 8/7 3 049
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0001
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0601
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0211
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0711
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0421
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0921
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0431
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0041
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0541
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0051
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0551
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0161
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0661
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0171
8/7-5 2/1-4 8/3-4 2/1-4 0771
8/7-5 2/1-4 8/7-4 2/1-4 0381
8/7-5 2/1-4 0291
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693198
Mold Base 15-7/8 x 261009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 26", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693199
Mold Base 15-7/8 x 261009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 088
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 049
8/7-1 3 8/3-1 3 8/7 3 099
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0601
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0111
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0811
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0421
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0131
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0631
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0241
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0741
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0351
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0951
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0461
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0071
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0571
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0181
8/7-5 2/1-4 8/3-4 2/1-4 0781
8/7-5 2/1-4 8/7-4 2/1-4 0291
8/7-5 2/1-4 0302
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693200
Mold Base 15-7/8 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693201
Mold Base 15-7/8 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0501
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0111
8/7-1 3 8/3-1 3 8/7 3 0811
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0621
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0331
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0141
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0741
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0551
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0261
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0961
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0571
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0281
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0981
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0591
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0202
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0802
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0512
8/7-5 2/1-4 8/3-4 2/1-4 0222
8/7-5 2/1-4 8/7-4 2/1-4 0822
8/7-5 2/1-4 0242
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693202
Mold Base 15-7/8 x 35-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693203
Mold Base 15-7/8 x 35-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0431
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0241
8/7-1 3 8/3-1 3 8/7 3 0941
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0851
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0861
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0571
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0581
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0391
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0102
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0112
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0912
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0722
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0532
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0342
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0152
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0952
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0762
8/7-5 2/1-4 8/3-4 2/1-4 0572
8/7-5 2/1-4 8/7-4 2/1-4 0382
8/7-5 2/1-4 0992
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693204
Mold Base 16-1/2 x 23-3/41009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-3/4", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693205
Mold Base 16-1/2 x 23-3/41009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 078
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 039
8/7-1 3 8/3-1 3 8/7 3 099
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0501
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0111
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0811
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0321
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0031
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0631
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0141
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0741
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0251
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0851
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0361
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0961
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0471
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0081
8/7-5 2/1-4 8/3-4 2/1-4 0681
8/7-5 2/1-4 8/7-4 2/1-4 0191
8/7-5 2/1-4 0202
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693206
Mold Base 16-1/2 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693207
Mold Base 16-1/2 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0511
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0221
8/7-1 3 8/3-1 3 8/7 3 0921
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0731
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0441
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0351
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0061
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0861
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0571
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0281
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0981
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0691
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0302
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0902
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0612
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0322
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0032
8/7-5 2/1-4 8/3-4 2/1-4 0732
8/7-5 2/1-4 8/7-4 2/1-4 0442
8/7-5 2/1-4 0852
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693208
Mold Base 17-7/8 x 181009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 18", 20", 23-1/2", 26" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693209
Mold Base 17-7/8 x 181009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 027
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 067
8/7-1 3 8/3-1 3 8/7 3 018
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 068
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 019
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 069
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0101
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0701
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0111
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0611
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0021
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0521
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0921
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0431
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0831
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0341
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0841
8/7-5 2/1-4 8/3-4 2/1-4 0251
8/7-5 2/1-4 8/7-4 2/1-4 0751
8/7-5 2/1-4 0661
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693210
Mold Base 17-7/8 x 201009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 20", 23-1/2", 26" or 29-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693211
Mold Base 17-7/8 x 201009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 008
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 058
8/7-1 3 8/3-1 3 8/7 3 009
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 069
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0101
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0701
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0211
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0811
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0321
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0821
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0331
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0831
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0341
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0941
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0451
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0951
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0461
8/7-5 2/1-4 8/3-4 2/1-4 0961
8/7-5 2/1-4 8/7-4 2/1-4 0471
8/7-5 2/1-4 0481
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693212
Mold Base 17-7/8 x 23-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-1/2", 26", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693213
Mold Base 17-7/8 x 23-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 039
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 099
8/7-1 3 8/3-1 3 8/7 3 0501
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0311
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0911
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0621
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0231
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0931
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0541
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0151
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0751
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0361
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0961
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0571
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0181
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0681
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0291
8/7-5 2/1-4 8/3-4 2/1-4 0891
8/7-5 2/1-4 8/7-4 2/1-4 0402
8/7-5 2/1-4 0612
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693214
Mold Base 17-7/8 x 261009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 26", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693215
Mold Base 17-7/8 x 261009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0301
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0011
8/7-1 3 8/3-1 3 8/7 3 0711
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0521
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0131
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0931
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0641
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0451
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0061
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0761
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0371
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0081
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0781
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0391
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0002
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0602
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0312
8/7-5 2/1-4 8/3-4 2/1-4 0912
8/7-5 2/1-4 8/7-4 2/1-4 0622
8/7-5 2/1-4 0932
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693216
Mold Base 17-7/8 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693217
Mold Base 17-7/8 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0711
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0521
8/7-1 3 8/3-1 3 8/7 3 0231
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0141
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0941
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0851
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0561
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0471
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0281
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0981
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0791
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0402
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0212
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0912
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0722
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0432
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0242
8/7-5 2/1-4 8/3-4 2/1-4 0942
8/7-5 2/1-4 8/7-4 2/1-4 0752
8/7-5 2/1-4 0272
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693218
Mold Base 17-7/8 x 35-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693219
Mold Base 17-7/8 x 35-1/2
Call for Current Pricing - We Want Your Business!
1009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0141
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0051
8/7-1 3 8/3-1 3 8/7 3 0951
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0861
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0971
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0091
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0002
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0012
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0912
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0822
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0732
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0642
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0552
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0462
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0372
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0282
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0192
8/7-5 2/1-4 8/3-4 2/1-4 0003
8/7-5 2/1-4 8/7-4 2/1-4 0903
8/7-5 2/1-4 0723
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693220
Mold Base 19-1/2 x 23-3/41009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-3/4", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693221
Mold Base 19-1/2 x 23-3/41009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0901
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0611
8/7-1 3 8/3-1 3 8/7 3 0221
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0031
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0731
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0441
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0051
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0951
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0561
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0271
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0871
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0581
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0291
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0891
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0502
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0112
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0812
8/7-5 2/1-4 8/3-4 2/1-4 0422
8/7-5 2/1-4 8/7-4 2/1-4 0132
8/7-5 2/1-4 0442
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693222
Mold Base 19-1/2 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693223
Mold Base 19-1/2 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0531
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0341
8/7-1 3 8/3-1 3 8/7 3 0251
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0161
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0071
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0971
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0781
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0791
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0502
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0312
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0122
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0032
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0832
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0642
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0452
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0262
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0072
8/7-5 2/1-4 8/3-4 2/1-4 0972
8/7-5 2/1-4 8/7-4 2/1-4 0782
8/7-5 2/1-4 0303
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693224
Mold Base 19-1/2 x 35-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693225
Mold Base 19-1/2 x 35-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0361
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0371
8/7-1 3 8/3-1 3 8/7 3 0381
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0491
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0402
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0612
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0622
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0732
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0742
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0752
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0762
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0672
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0682
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0692
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0603
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0613
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0623
8/7-5 2/1-4 8/3-4 2/1-4 0533
8/7-5 2/1-4 8/7-4 2/1-4 0543
8/7-5 2/1-4 0563
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693226
Mold Base 23-3/4 x 23-3/41009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 23-3/4", 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693227
Mold Base 23-3/4 x 23-3/41009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0041
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0841
8/7-1 3 8/3-1 3 8/7 3 0651
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0661
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0471
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0381
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0091
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0002
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0802
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0612
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0422
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0232
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0042
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0842
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0652
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0462
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0272
8/7-5 2/1-4 8/3-4 2/1-4 0082
8/7-5 2/1-4 8/7-4 2/1-4 0882
8/7-5 2/1-4 0403
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693228
Mold Base 23-3/4 x 29-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 29-1/2" or 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693229
Mold Base 23-3/4 x 29-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0471
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0481
8/7-1 3 8/3-1 3 8/7 3 0491
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0602
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0612
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0722
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0732
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0942
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0952
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0962
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0872
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0882
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0892
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0803
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0813
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0823
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0833
8/7-5 2/1-4 8/3-4 2/1-4 0843
8/7-5 2/1-4 8/7-4 2/1-4 0853
8/7-5 2/1-4 0873
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693230
Mold Base 23-3/4 x 35-1/21009OSIdeifitreCynapmoC
General DimensionsTCP = Top clamp plate thickness in 1-3/8"D = Diameter of locating ring furnished in 3.990" or 4.990"O = Small diameter of sprue bushing orifice opening furnished in 5/32", 7/32", 9/32" or 11/32"R = Spherical radius of sprue bushing furnished in 1/2" or 3/4"E = Length of ejector plate furnished in 35-1/2"
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693231
Mold Base 23-3/4 x 35-1/21009OSIdeifitreCynapmoC
ekortSrotcejE
"C" ekortS
3 61/1-1
2/1-3 61/9-1
4 61/1-2
2/1-4 61/9-2
ssenkcihTetalP"A"
xorppAthgieW
ecirP8/7 8/3-1 8/7-1 8/3-2 8/7-2 8/3-3 8/7-3 8/3-4 8/7-4 8/7-5
thgieH"C"dnassenkcihTetalP"B"
B C B C B C B C B C B C B C B C B C B C
8/7 3 0902
rofllaCecirP
dnayrevileD
8/3-1 3 8/7 3 0122
8/7-1 3 8/3-1 3 8/7 3 0332
8/3-2 2/1-3 8/7-1 3 8/3-1 3 8/7 3 0742
8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 3 0952
8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 2/1-3 8/7 2/1-3 0372
rofllaCecirP
dnayrevileD
8/7-3 4 8/3-3 4 8/7-2 2/1-3 8/3-2 2/1-3 8/7-1 2/1-3 8/3-1 4 8/7 2/1-3 0582
8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 2/1-3 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0992
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 4 8/3-2 4 8/7-1 4 8/3-1 2/1-3 8/7 2/1-3 0113
8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/3-1 4 0323
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/7-1 4 8/7 4 0533
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/3-2 2/1-4 8/3-1 4 0643
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/7-2 2/1-4 8/7-1 2/1-4 0853
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/3-3 2/1-4 8/3-2 2/1-4 0073
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/7-3 2/1-4 8/7-2 2/1-4 0283
8/7-5 2/1-4 8/7-4 2/1-4 8/3-4 2/1-4 8/3-3 2/1-4 0493
rofllaCecirP
dnayrevileD
8/7-5 2/1-4 8/7-4 2/1-4 8/7-3 2/1-4 0604
8/7-5 2/1-4 8/3-4 2/1-4 0814
8/7-5 2/1-4 8/7-4 2/1-4 0034
8/7-5 2/1-4 0454
Call for Current Pricing - We Want Your Business!
Ordering Instructions, Please Specify:• Base Size • Type of Steel• “A” Plate Thickness • “D” Dimension• “B” Plate Thickness • “O” Dimension• “TCP” Thickness • “R” Dimension• “C” Dimension • “E” Dimension
Call with your Specials!
Super Competitive Quotes!
Short Lead Times!
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693232
Mold BaseClamp Slot Styles
1009OSIdeifitreCynapmoC
1061 Industrial Parkway, Medina, Ohio 44256, U.S.A.Phone: 330-722-1182 • Toll Free: 800-345-7693
Fax: 330-725-2723 • Toll Free Fax: 800-581-9264E-mail: [email protected]
ORDER TOLL FREE
1-800-345-7693233
Mold BasesStripper Plate Style
1009OSIdeifitreCynapmoC
BMS Standard Stripper Plate Mold Basesare available with either 5 or 6 plateconstruction. Location of the return pins,leader pins, dowels and screws are identicalto our standard “A” Series Mold Bases.Besides offering the 5 and 6 Plate StripperMold Bases, we also offer the “AX” and “T”Series Mold Bases.Call with your requirements and we willquickly provide price and delivery. All ofour Mold Bases are manufactured in theU.S.A.
BMS has been supplying mold bases tothe plastics industry since 1976. Wewere the first to bring our customers“customized standards”, that allow therelocation or omission of any part of thebase. This allows you unprecedentedfreedom to design your job around yourrequirements and not those of a moldbase manufacturer. BMS will alsoprovide special mold bases built to yourrequirements. This includes specialsizes, metals and custom machiningoptions.
6 Plate Stripper PlateMold Base
5 Plate Stripper PlateMold Base