COMPANY PROFILE QUALITY OF THE PRODUCT - Groupe IPI · COMPANY PROFILE PRODUCT RANGE AND SERVICES:...
Transcript of COMPANY PROFILE QUALITY OF THE PRODUCT - Groupe IPI · COMPANY PROFILE PRODUCT RANGE AND SERVICES:...
PARIS
FIRE SAFE BALL VALVE
QUALITY OF THE PRODUCT
DARCO SAS is organized on a human scale andhas a strong technical experience built up since1998. It benefits from its own dedicated machining plant and workshop, and offers specially adapted products designed to transport many types offluid corresponding to different temperature and pressure.
We present a large range of manual and / oractuated ball valves, with patterns for metal/metaldesign and double block and bleed valves that we export all over the world. The dimensions of our valves go from 1/4’’up to 36’’ class 150 to 2500, API 5000 and 10000.
With 15 years of experience behind us andinnovations for the metal-metal design anddouble block and bleed valves, DARCO SAS isable to meet specific requests that you may have,or to incorporate the different features listedabove in order to respond to your most exactingrequirements.
DARCO S.A.S provides a wide range of valves for use in natural gas, LNG, crude oil and refined products transmission lines.
COMPANY PROFILE
PRODUCT RANGE AND SERVICES:
DARCO Ball valves range consists exclusively of top quality on floatingand trunnion mounted valves for high performance on different kind of services and critical applications with special configurations, size 1/4’’ to 36’’, 150 lbs to API 10000 full and reduced bore, in carbon steel, Stainless steel, Duplex or other requirement for the following services:
• GAS TRANSPORT AND STORAGE• CRUDE OIL• CORROSIVE AND ABRASIVE FLOW• SOUR SERVICES• CHEMICAL SERVICES
A Research and development department is already looking for improvements in design and materials.
TYPES OF VALVES:
• Metal-metal seated;• Double piston effect seat;• Single block and bleed;• Double block and bleed.
QUALITY SYSTEM
ZI de Berlanne,Rue du Pont Long,64160 MORLAAS - France
P. +33 (0)5 59 84 63 00 E. [email protected]
St. Valiasr- Sq. Valiasr-Build. Valiasr - Allavi n°7 / Floor 6th / Office 34Tehran -IRAN
E. [email protected]@efcofrance.com
P. 0098 939 201 4651Fax 0098 21 88 946 559
TOTAL E&PARKEMAFLUXYS- C4 GASTIGF
N’KOSSAANGUILLEGRONDINMOHO BILONDOMOHO NORDKAOMBO
MARTIN LINGETOTAL UK
KHARYAGATOTAL
DOROOD PROJECT
VEOLIAICHTYS
© Photo : Jam
es Daisa
PARIS
FIRE SAFE BALL VALVE
QUALITY OF THE PRODUCT
DARCO SAS is organized on a human scale and has a strong technical experience built up since 1998. It benefits from its own dedicated machining plant and workshop, and offers specially adapted products designed to transport many types of fluid corresponding to different temperature and pressure.
We present a large range of manual and / or actuated ball valves, with patterns for metal/metal design and double block and bleed valves that we export all over the world. The dimensions of our valves go from 1/4’’up to 36’’ class 150 to 2500, API 5000 and 10000.
With 15 years of experience behind us and innovations for the metal-metal design and double block and bleed valves, DARCO SAS is able to meet specific requests that you may have, or to incorporate the different features listed above in order to respond to your most exacting requirements.
DARCO S.A.S provides a wide range of valves for use in natural gas, LNG, crude oil and refined products transmission lines.
COMPANY PROFILE
PRODUCT RANGE AND SERVICES:
DARCO Ball valves range consists exclusively of top quality on floating and trunnion mounted valves for high performance on different kind of services and critical applications with special configurations, size 1/4’’ to 36’’, 150 lbs to API 10000 full and reduced bore, in carbon steel, Stainless steel, Duplex or other requirement for the following services:
• GAS TRANSPORT AND STORAGE• CRUDE OIL• CORROSIVE AND ABRASIVE FLOW• SOUR SERVICES• CHEMICAL SERVICES
A Research and development department is already looking for improvements in design and materials.
TYPES OF VALVES:
• Metal-metal seated;• Double piston effect seat;• Single block and bleed;• Double block and bleed.
QUALITY SYSTEM
ZI de Berlanne,Rue du Pont Long,64160 MORLAAS - France
P. +33 (0)5 59 84 63 00 E. [email protected]
St. Valiasr- Sq. Valiasr-Build. Valiasr - Allavi n°7 / Floor 6th / Office 34Tehran -IRAN
E. [email protected] [email protected]
P. 0098 939 201 4651Fax 0098 21 88 946 559
TOTAL E&PARKEMAFLUXYS- C4 GASTIGF
N’KOSSAANGUILLEGRONDINMOHO BILONDOMOHO NORDKAOMBO
MARTIN LINGETOTAL UK
KHARYAGATOTAL
DOROOD PROJECT
VEOLIAICHTYS
© Photo : Jam
es Daisa
PARIS
FIRE SAFE BALL VALVE
QUALITY OF THE PRODUCT
DARCO SAS is organized on a human scale and has a strong technical experience built up since 1998. It benefits from its own dedicated machining plant and workshop, and offers specially adapted products designed to transport many types of fluid corresponding to different temperature and pressure.
We present a large range of manual and / or actuated ball valves, with patterns for metal/metal design and double block and bleed valves that we export all over the world. The dimensions of our valves go from 1/4’’up to 36’’ class 150 to 2500, API 5000 and 10000.
With 15 years of experience behind us and innovations for the metal-metal design and double block and bleed valves, DARCO SAS is able to meet specific requests that you may have, or to incorporate the different features listed above in order to respond to your most exacting requirements.
DARCO S.A.S provides a wide range of valves for use in natural gas, LNG, crude oil and refined products transmission lines.
COMPANY PROFILE
PRODUCT RANGE AND SERVICES:
DARCO Ball valves range consists exclusively of top quality on floating and trunnion mounted valves for high performance on different kind of services and critical applications with special configurations, size 1/4’’ to 36’’, 150 lbs to API 10000 full and reduced bore, in carbon steel, Stainless steel, Duplex or other requirement for the following services:
• GAS TRANSPORT AND STORAGE• CRUDE OIL• CORROSIVE AND ABRASIVE FLOW• SOUR SERVICES• CHEMICAL SERVICES
A Research and development department is already looking for improvements in design and materials.
TYPES OF VALVES:
• Metal-metal seated;• Double piston effect seat;• Single block and bleed;• Double block and bleed.
QUALITY SYSTEM
ZI de Berlanne,Rue du Pont Long,64160 MORLAAS - France
P. +33 (0)5 59 84 63 00 E. [email protected]
St. Valiasr- Sq. Valiasr-Build. Valiasr - Allavi n°7 / Floor 6th / Office 34Tehran -IRAN
E. [email protected] [email protected]
P. 0098 939 201 4651Fax 0098 21 88 946 559
TOTAL E&PARKEMAFLUXYS- C4 GASTIGF
N’KOSSAANGUILLEGRONDINMOHO BILONDOMOHO NORDKAOMBO
MARTIN LINGETOTAL UK
KHARYAGATOTAL
DOROOD PROJECT
VEOLIAICHTYS
© Photo : Jam
es Daisa
FLOATING BALL VALVESFloating ball valves are available from 1/4’’ to 6’’ – ASME class 150 to 1500 in several combi-nations of materials and execution to cover all possible service application.
TRUNNION MOUNTEDTrunnion ball valves are available from 1/4’’ to 36’’ – ASME class 150 to 2500, API 5000 and 10000 in several combinations of materials and execution to cover all possible service application.
ANTI BLOW OUT STEMThe stem of MD ball valves has an anti-blow out design as BS5351 specification. The pressure thrust on the stem is supported by a washer in antifriction material (PTFE charged).
FIRE SAFE DESIGNBall valves have been succeeded to fire testing and are certified fire safe. Conformance to BS6755 part II, API607, EN ISO 10497, TOTAL SGM 2040 TUY SC01.
ANTI STATIC DEVICEElectrical continuity assured between the ball, stem, body and other components. Different materials are used as conductive bridges.
SECONDARY SEALANT INJECTION FOR SEATS6” and above.
TIGHTNESS OF THE UPPER STEMDual sealing arrangement includes non metallic seal rings plus a graphite gasket at the static body closure interface.This seal arrangement ensures zero leakage and fire safety.
SELF LUBRIFICATING BEARINGSSmooth self lubricated bearings ensure a low and constant working exertion. No lubricating is needed. The bearing in PTFE coated are designed to ensure an excellent service with the most aggressive working conditions. Special bearings can be provided on request.
CAPTIVE BLEEDVent connection at the bleed valve outlet is plugged with a metallic screwed bleed plug fitted with a captive bleed screw.
2 OR 3 PIECES FORGED PARTS
SOFT SEATValves specified for standard service have a seat design including a resilient material insert at the valve seat such as DEVLON, PFA, PTFE, PTFCE, PEEK.
Single piston effect (self-relieving seats)Fluid pressure, both upstream and downstream, creates a resultant thrust that pushes the seat rings against the ball.
Fluid pressure acting in the body cavity creates a resultant thrust that pushes the seat rings away from the ball.
The single piston design permits the automatic release of any overpressure in the body cavity when the valve is in the fully open or fully closed position.
Consequently, the seat rings are «self-relieving.»
Double piston effectFluid pressure, both upstream and down-stream as well as in the body cavity, cates a resultant thrust that pushes the seat rings towards the ball.
Valves with double piston effect seat rings require a relief valve to reduce the build-up of overpressure in the body cavity.
METAL SEATEDValves designed for abrasive service or for operations in temperatures that prohibit the use of a resilient material have seating action provided by the metal-to-metal contact between the ball and the seat rings. Seating faces are hardfaced.
In standard this valve can be supplied with high coating tungsten carbide thickness up to 400 Microns.
API 6D. - Specification for pipeline valves.
API 598 - Valve Inspection and Testing.
ASME B16.34 - Valves-Flanged, Threaded, and Welding End.
ASME B31.8 - Gas Transmission and distribution piping systems
ASME B31.4 - Liquid Transmission and distribution piping systems
ASME B16.5 - Pipe flanges and Flanged Fittings.
MSS-SP-44 - Steel Pipe Line Flanges
ASME B16.11 - Forged Steel Fittings – Socket-Welding and Threaded.
ASME B16.25 - Butt welding Ends.
ASME B36.10 - Welded and Sean less Wrought Steel Pipe.
ANSI/ASME B1.20.1 - Pipe Threads, General Purpose (Inch).
BS 6755 Part. 2, Specification for fire type-testing requirements.
Model Size RatingOptions
DPE TCC SBB DBB
D1V & D2VScrewed
Up to 2’’ (RB)
ANSI 150 to 1500
D1B & D2BBolted
Up to 2’’ (RB)
ANSI 150 to 1500
D4Bolted Up to 6’’ ANSI 150
to 300
D1BA & D2BABolted
Up to 2’’ (RB)
ANSI 150 to 1500
D3BBolted
Up to 2’’ (RB)
ANSI 2500API 5000& 10000
D5 From 2’’ to 12’’
ANSI 150 to 2500
D6 From 12’’ to 36’’
ANSI 150 to 2500
SBB Up to 2’’ (RB)
ANSI 150 to 1500
DBB Up to 12’’ ANSI 150 to 2500
JacketedValve
Up to 6’’ (RB)
ANSI 150 & 300
Disk controller
valve
Up to 12’’ (FB)
ANSI 150 to 2500
FLOATING BALL VALVESFloating ball valves are available from 1/4’’ to 6’’ – ASME class 150 to 1500 in several combi-nations of materials and execution to cover all possible service application.
TRUNNION MOUNTEDTrunnion ball valves are available from 1/4’’ to 36’’ – ASME class 150 to 2500, API 5000 and 10000 in several combinations of materials and execution to cover all possible service application.
ANTI BLOW OUT STEMThe stem of MD ball valves has an anti-blow out design as BS5351 specification. The pressure thrust on the stem is supported by a washer in antifriction material (PTFE charged).
FIRE SAFE DESIGNBall valves have been succeeded to fire testing and are certified fire safe. Conformance to BS6755 part II, API607, EN ISO 10497, TOTAL SGM 2040 TUY SC01.
ANTI STATIC DEVICEElectrical continuity assured between the ball, stem, body and other components. Different materials are used as conductive bridges.
SECONDARY SEALANT INJECTION FOR SEATS6” and above.
TIGHTNESS OF THE UPPER STEMDual sealing arrangement includes non metallic seal rings plus a graphite gasket at the static body closure interface.This seal arrangement ensures zero leakage and fire safety.
SELF LUBRIFICATING BEARINGSSmooth self lubricated bearings ensure a low and constant working exertion. No lubricating is needed. The bearing in PTFE coated are designed to ensure an excellent service with the most aggressive working conditions. Special bearings can be provided on request.
CAPTIVE BLEEDVent connection at the bleed valve outlet is plugged with a metallic screwed bleed plug fitted with a captive bleed screw.
2 OR 3 PIECES FORGED PARTS
SOFT SEATValves specified for standard service have a seat design including a resilient material insert at the valve seat such as DEVLON, PFA, PTFE, PTFCE, PEEK.
Single piston effect (self-relieving seats)Fluid pressure, both upstream and downstream, creates a resultant thrust that pushes the seat rings against the ball.
Fluid pressure acting in the body cavity creates a resultant thrust that pushes the seat rings away from the ball.
The single piston design permits the automatic release of any overpressure in the body cavity when the valve is in the fully open or fully closed position.
Consequently, the seat rings are «self-relieving.»
Double piston effectFluid pressure, both upstream and down-stream as well as in the body cavity, cates a resultant thrust that pushes the seat rings towards the ball.
Valves with double piston effect seat rings require a relief valve to reduce the build-up of overpressure in the body cavity.
METAL SEATEDValves designed for abrasive service or for operations in temperatures that prohibit the use of a resilient material have seating action provided by the metal-to-metal contact between the ball and the seat rings. Seating faces are hardfaced.
In standard this valve can be supplied with high coating tungsten carbide thickness up to 400 Microns.
API 6D. - Specification for pipeline valves.
API 598 - Valve Inspection and Testing.
ASME B16.34 - Valves-Flanged, Threaded, and Welding End.
ASME B31.8 - Gas Transmission and distribution piping systems
ASME B31.4 - Liquid Transmission and distribution piping systems
ASME B16.5 - Pipe flanges and Flanged Fittings.
MSS-SP-44 - Steel Pipe Line Flanges
ASME B16.11 - Forged Steel Fittings – Socket-Welding and Threaded.
ASME B16.25 - Butt welding Ends.
ASME B36.10 - Welded and Sean less Wrought Steel Pipe.
ANSI/ASME B1.20.1 - Pipe Threads, General Purpose (Inch).
BS 6755 Part. 2, Specification for fire type-testing requirements.
Model Size RatingOptions
DPE TCC SBB DBB
D1V & D2VScrewed
Up to 2’’ (RB)
ANSI 150 to 1500
D1B & D2BBolted
Up to 2’’ (RB)
ANSI 150 to 1500
D4Bolted Up to 6’’ ANSI 150
to 300
D1BA & D2BABolted
Up to 2’’ (RB)
ANSI 150 to 1500
D3BBolted
Up to 2’’ (RB)
ANSI 2500API 5000& 10000
D5 From 2’’ to 12’’
ANSI 150 to 2500
D6 From 12’’ to 36’’
ANSI 150 to 2500
SBB Up to 2’’ (RB)
ANSI 150 to 1500
DBB Up to 12’’ ANSI 150 to 2500
JacketedValve
Up to 6’’ (RB)
ANSI 150 & 300
Disk controller
valve
Up to 12’’ (FB)
ANSI 150 to 2500
FLOATING BALL VALVESFloating ball valves are available from 1/4’’ to 6’’ – ASME class 150 to 1500 in several combi-nations of materials and execution to cover all possible service application.
TRUNNION MOUNTEDTrunnion ball valves are available from 1/4’’ to 36’’ – ASME class 150 to 2500, API 5000 and 10000 in several combinations of materials and execution to cover all possible service application.
ANTI BLOW OUT STEMThe stem of MD ball valves has an anti-blow out design as BS5351 specification. The pressure thrust on the stem is supported by a washer in antifriction material (PTFE charged).
FIRE SAFE DESIGNBall valves have been succeeded to fire testing and are certified fire safe. Conformance to BS6755 part II, API607, EN ISO 10497, TOTAL SGM 2040 TUY SC01.
ANTI STATIC DEVICEElectrical continuity assured between the ball, stem, body and other components. Different materials are used as conductive bridges.
SECONDARY SEALANT INJECTION FOR SEATS6” and above.
TIGHTNESS OF THE UPPER STEMDual sealing arrangement includes non metallic seal rings plus a graphite gasket at the static body closure interface.This seal arrangement ensures zero leakage and fire safety.
SELF LUBRIFICATING BEARINGSSmooth self lubricated bearings ensure a low and constant working exertion. No lubricating is needed. The bearing in PTFE coated are designed to ensure an excellent service with the most aggressive working conditions. Special bearings can be provided on request.
CAPTIVE BLEEDVent connection at the bleed valve outlet is plugged with a metallic screwed bleed plug fitted with a captive bleed screw.
2 OR 3 PIECES FORGED PARTS
SOFT SEATValves specified for standard service have a seat design including a resilient material insert at the valve seat such as DEVLON, PFA, PTFE, PTFCE, PEEK.
Single piston effect (self-relieving seats)Fluid pressure, both upstream and downstream, creates a resultant thrust that pushes the seat rings against the ball.
Fluid pressure acting in the body cavity creates a resultant thrust that pushes the seat rings away from the ball.
The single piston design permits the automatic release of any overpressure in the body cavity when the valve is in the fully open or fully closed position.
Consequently, the seat rings are «self-relieving.»
Double piston effectFluid pressure, both upstream and down-stream as well as in the body cavity, cates a resultant thrust that pushes the seat rings towards the ball.
Valves with double piston effect seat rings require a relief valve to reduce the build-up of overpressure in the body cavity.
METAL SEATEDValves designed for abrasive service or for operations in temperatures that prohibit the use of a resilient material have seating action provided by the metal-to-metal contact between the ball and the seat rings. Seating faces are hardfaced.
In standard this valve can be supplied with high coating tungsten carbide thickness up to 400 Microns.
API 6D. - Specification for pipeline valves.
API 598 - Valve Inspection and Testing.
ASME B16.34 - Valves-Flanged, Threaded, and Welding End.
ASME B31.8 - Gas Transmission and distribution piping systems
ASME B31.4 - Liquid Transmission and distribution piping systems
ASME B16.5 - Pipe flanges and Flanged Fittings.
MSS-SP-44 - Steel Pipe Line Flanges
ASME B16.11 - Forged Steel Fittings – Socket-Welding and Threaded.
ASME B16.25 - Butt welding Ends.
ASME B36.10 - Welded and Sean less Wrought Steel Pipe.
ANSI/ASME B1.20.1 - Pipe Threads, General Purpose (Inch).
BS 6755 Part. 2, Specification for fire type-testing requirements.
Model Size RatingOptions
DPE TCC SBB DBB
D1V & D2VScrewed
Up to 2’’ (RB)
ANSI 150 to 1500
D1B & D2BBolted
Up to 2’’ (RB)
ANSI 150 to 1500
D4Bolted Up to 6’’ ANSI 150
to 300
D1BA & D2BABolted
Up to 2’’ (RB)
ANSI 150 to 1500
D3BBolted
Up to 2’’ (RB)
ANSI 2500API 5000& 10000
D5 From 2’’ to 12’’
ANSI 150 to 2500
D6 From 12’’ to 36’’
ANSI 150 to 2500
SBB Up to 2’’ (RB)
ANSI 150 to 1500
DBB Up to 12’’ ANSI 150 to 2500
JacketedValve
Up to 6’’ (RB)
ANSI 150 & 300
Disk controller
valve
Up to 12’’ (FB)
ANSI 150 to 2500
FLOATING BALL VALVESFloating ball valves are available from 1/4’’ to 6’’ – ASME class 150 to 1500 in several combi-nations of materials and execution to cover all possible service application.
TRUNNION MOUNTEDTrunnion ball valves are available from 1/4’’ to 36’’ – ASME class 150 to 2500, API 5000 and 10000 in several combinations of materials and execution to cover all possible service application.
ANTI BLOW OUT STEMThe stem of MD ball valves has an anti-blow out design as BS5351 specification. The pressure thrust on the stem is supported by a washer in antifriction material (PTFE charged).
FIRE SAFE DESIGNBall valves have been succeeded to fire testing and are certified fire safe. Conformance to BS6755 part II, API607, EN ISO 10497, TOTAL SGM 2040 TUY SC01.
ANTI STATIC DEVICEElectrical continuity assured between the ball, stem, body and other components. Different materials are used as conductive bridges.
SECONDARY SEALANT INJECTION FOR SEATS6” and above.
TIGHTNESS OF THE UPPER STEMDual sealing arrangement includes non metallic seal rings plus a graphite gasket at the static body closure interface.This seal arrangement ensures zero leakage and fire safety.
SELF LUBRIFICATING BEARINGSSmooth self lubricated bearings ensure a low and constant working exertion. No lubricating is needed. The bearing in PTFE coated are designed to ensure an excellent service with the most aggressive working conditions. Special bearings can be provided on request.
CAPTIVE BLEEDVent connection at the bleed valve outlet is plugged with a metallic screwed bleed plug fitted with a captive bleed screw.
2 OR 3 PIECES FORGED PARTS
SOFT SEATValves specified for standard service have a seat design including a resilient material insert at the valve seat such as DEVLON, PFA, PTFE, PTFCE, PEEK.
Single piston effect (self-relieving seats)Fluid pressure, both upstream and downstream, creates a resultant thrust that pushes the seat rings against the ball.
Fluid pressure acting in the body cavity creates a resultant thrust that pushes the seat rings away from the ball.
The single piston design permits the automatic release of any overpressure in the body cavity when the valve is in the fully open or fully closed position.
Consequently, the seat rings are «self-relieving.»
Double piston effectFluid pressure, both upstream and down-stream as well as in the body cavity, cates a resultant thrust that pushes the seat rings towards the ball.
Valves with double piston effect seat rings require a relief valve to reduce the build-up of overpressure in the body cavity.
METAL SEATEDValves designed for abrasive service or for operations in temperatures that prohibit the use of a resilient material have seating action provided by the metal-to-metal contact between the ball and the seat rings. Seating faces are hardfaced.
In standard this valve can be supplied with high coating tungsten carbide thickness up to 400 Microns.
API 6D. - Specification for pipeline valves.
API 598 - Valve Inspection and Testing.
ASME B16.34 - Valves-Flanged, Threaded, and Welding End.
ASME B31.8 - Gas Transmission and distribution piping systems
ASME B31.4 - Liquid Transmission and distribution piping systems
ASME B16.5 - Pipe flanges and Flanged Fittings.
MSS-SP-44 - Steel Pipe Line Flanges
ASME B16.11 - Forged Steel Fittings – Socket-Welding and Threaded.
ASME B16.25 - Butt welding Ends.
ASME B36.10 - Welded and Sean less Wrought Steel Pipe.
ANSI/ASME B1.20.1 - Pipe Threads, General Purpose (Inch).
BS 6755 Part. 2, Specification for fire type-testing requirements.
Model Size RatingOptions
DPE TCC SBB DBB
D1V & D2VScrewed
Up to 2’’ (RB)
ANSI 150 to 1500
D1B & D2BBolted
Up to 2’’ (RB)
ANSI 150 to 1500
D4Bolted Up to 6’’ ANSI 150
to 300
D1BA & D2BABolted
Up to 2’’ (RB)
ANSI 150 to 1500
D3BBolted
Up to 2’’ (RB)
ANSI 2500API 5000& 10000
D5 From 2’’ to 12’’
ANSI 150 to 2500
D6 From 12’’ to 36’’
ANSI 150 to 2500
SBB Up to 2’’ (RB)
ANSI 150 to 1500
DBB Up to 12’’ ANSI 150 to 2500
JacketedValve
Up to 6’’ (RB)
ANSI 150 & 300
Disk controller
valve
Up to 12’’ (FB)
ANSI 150 to 2500
PARIS
FIRE SAFE BALL VALVE
QUALITY OF THE PRODUCT
DARCO SAS is organized on a human scale and has a strong technical experience built up since 1998. It benefits from its own dedicated machining plant and workshop, and offers specially adapted products designed to transport many types of fluid corresponding to different temperature and pressure.
We present a large range of manual and / or actuated ball valves, with patterns for metal/metal design and double block and bleed valves that we export all over the world. The dimensions of our valves go from 1/4’’up to 36’’ class 150 to 2500, API 5000 and 10000.
With 15 years of experience behind us and innovations for the metal-metal design and double block and bleed valves, DARCO SAS is able to meet specific requests that you may have, or to incorporate the different features listed above in order to respond to your most exacting requirements.
DARCO S.A.S provides a wide range of valves for use in natural gas, LNG, crude oil and refined products transmission lines.
COMPANY PROFILE
PRODUCT RANGE AND SERVICES:
DARCO Ball valves range consists exclusively of top quality on floating and trunnion mounted valves for high performance on different kind of services and critical applications with special configurations, size 1/4’’ to 36’’, 150 lbs to API 10000 full and reduced bore, in carbon steel, Stainless steel, Duplex or other requirement for the following services:
• GAS TRANSPORT AND STORAGE• CRUDE OIL• CORROSIVE AND ABRASIVE FLOW• SOUR SERVICES• CHEMICAL SERVICES
A Research and development department is already looking for improvements in design and materials.
TYPES OF VALVES:
• Metal-metal seated;• Double piston effect seat;• Single block and bleed;• Double block and bleed.
QUALITY SYSTEM
ZI de Berlanne,Rue du Pont Long,64160 MORLAAS - France
P. +33 (0)5 59 84 63 00 E. [email protected]
St. Valiasr- Sq. Valiasr-Build. Valiasr - Allavi n°7 / Floor 6th / Office 34Tehran -IRAN
E. [email protected] [email protected]
P. 0098 939 201 4651Fax 0098 21 88 946 559
TOTAL E&PARKEMAFLUXYS- C4 GASTIGF
N’KOSSAANGUILLEGRONDINMOHO BILONDOMOHO NORDKAOMBO
MARTIN LINGETOTAL UK
KHARYAGATOTAL
DOROOD PROJECT
VEOLIAICHTYS
© Photo : Jam
es Daisa