Company Profile - starbestnig.comCompany Profile . QUALITY POLICY Keen on excellence to our...
Transcript of Company Profile - starbestnig.comCompany Profile . QUALITY POLICY Keen on excellence to our...
STARBEST NIGERIA LIMITED Plot 13, Block81A, Amuwo Odofin Industrial Layout Amuwo Odofin Lagos, Nigeria Email: [email protected]; [email protected]; [email protected] Website: www.starbestnig.com
Company Profile
QUALITY POLICY
Keen on excellence to our customers, our services deliverables must be
consistently of the highest quality obtainable. We ensure our customers’ needs
are met and exceeded, demonstrating our professionalism and experience in all
areas of our operations. Quality is the commitment of every one in Starbest
Nig. Ltd
These quality objectives shall be achieved through:
- Prompt provision of information and /or services to our clients (internal &
external)
- Priority attention to customer satisfaction, through articulated consideration
and confirmation of customers’ needs and expectations
- Create a conducive working environment for all employees
MISSION STATEMENT
We are servants with intent on providing excellent and quality services,
affordable and within the reach of all our clientele without compromise in the
quality of our products and services. To become the preferred company in
Nigeria in our chosen areas
VISION
Our vision is to be a leading innovation in calibration, testing, certification,
project management, engineering consulting and non-destructive testing
services in the Nigerian and West African Industrial Environment. We draw
our strength from our experience, integrity, unique packaging of services and
excellence of the people we engage. We shall demonstrate our leadership
position with great passion and vigour, total commitment to providing
our customers with concise solutions to their problems.
OUR CORE VALUES
We focus on excellence, integrity and quality performance in making sure we
achieve total customer satisfaction by delivering qualitative metrological service
and products without compromising standards.
INTRODUCTION
Starbest Nigeria Limited is a Nigerian Company with
expatriate content. It commenced operations in 2000. Though
commencing operation in 2000, the key personnel’s have been in
the oil, gas petrochemicals, Refineries and other sectors in the
past 23 years. We concentrate on inspections, calibration,
testing, certification, engineering consultancy, non-destructive
services etc. we are in a leading position to provide services
primarily to the domestic market, the West Africa Sub region
and eventually to the International Markets.
We render services to all industries in which quality
management services are required both within and outside the
country.
Our core team is made up of engineers with different
backgrounds and experience including Mechanical, Chemical,
Electrical/Electronics and instrumentation. Supporting this core
group of engineers are Technicians, Consultants, Auditors and
Lead Auditors with relevant experience profile capable of
providing solutions to industrial problems. Another group of
specialist in NDT with international acceptance professional
certifications (ASNT/PCN Levels II & III) is an added advantage
to give authenticity to our works and certificates when
eventually issued. Our teams of auditors and lead auditors have
capability of implementing ISO 9000 and ISO 14000 management
systems.
Our services cut across most company in Nigeria and the West
Africa sub-Sahara region but not limited to;
- Oil and Gas (upstream and downstream)
- Manufacturing Industries
- Pharmaceutical Industries
- Food and Beverages Industries
- Aviation Industries
- Building and Construction
SERVICE PROFILE
A. FLOW CALIBRATION
Flow Meter Calibration and Repairs Using a high precision Master Meter or Prover Tank the meters be
calibrated to a maximum error of + 0.05% and a period of six months
for re-calibration.
Dynamic SLIP TEST on the meters enables us to predict the mechanical
state of meter and permits useful recommendation.
When the meter is out of calibration, repair is carried out (with client’s
consent) and recalibrated.
Prover Tank Calibration
We undertake calibration of Prover Tank of all sizes using the
Automatic Over flow pipe pipette gravy metrically calibrated to
within 0.002% and traceable to international standards. We certify the
Prover Tanks at 0.02% accuracy.
Shore Tank Calibration (Vertical, Horizontal Barges
and Ships)
The necessity of accurate tank calibration becomes particular evident
where tanks are used for Stock Control or Custody Transfer
Measurements.
We undertake calibration of Vertical Storage Tanks using Strapping
Method in accordance with API 2551
Bottom volumes for Vertical Tanks can be determined by liquid fill or
physical floor survey as requested.
Horizontal Tanks, Ship and Barge Tanks can be determined by liquid fill
or physical floor survey as requested.
Horizontal Tanks, Ship and Barge Tanks are calibrated by Physical
Strapping in accordance with API 2551 and 2553 respectively.
Road Truck Calibration
We undertake calibration of Road Trucks of Petroleum product in the
clients’ premises with our high precision Master or at oil Installation if
required using the gantry Meters. The calibration can also be done
within our premises (flow Lab)
Surface and Underground Tank Calibration
These are calibrated by liquid fill method, the most accurate method of
calibration using our high precision Master Meters. The liquid fill
method in determining incremental volume of the tank takes into
account the tilt of the tank underground
Dispensing Pump Calibration
We undertake calibration of petroleum product dispensing pumps
using our standard measures traceable to international standards
for purpose of precise control of product quantities.
PROVER LOOP CALIBRATION
The foundation of accurate measurement is the confidence of the
Prover Loop base volume accuracy.
To achieve and maintain accurate results with Flow Meters, it is
necessary to have a Measurement Standard against which to
check them at frequent regular intervals.
If the base volume, which should be calibrated annually, is
inaccurate, all subsequent meter factors would lack integrity and
cause severe oil losses. In the crude oil terminals where the
Measurement Standard is usually the Prover LOOP, it
becomes very important and necessary to have them calibrated
regularly.
We calibrate and certify Prover Loop base volume to 0.02%
accuracy. Our staffs have tremendous experience internationally
in Prover Loop calibration using the Master Method.
LPG Vessel Calibration
Starbest also undergo the calibration of LPG vessels and tank
within our customer’s premises to ascertain the quality and
quantity of the vessels
B. PRESSURE TESTING, HYDROTESTING
AND LEAK DETECTION TEST
It is necessary to regularly Pressure Test the air receiver tank,
surface tank, underground tanks, LPG Vessels and associated
pipeline and equipment as recommended by the Department of
Petroleum Resources (DPR). Pressure testing enables the
identification of leaking Tanks and pipeline. We also undertake
repairs and installation for LPG and associated equipment.
C. TECHNICAL VALUATION.
It is normal for Oil Producing Companies to demand from their
contractors a valuation certificate issued by an independent
Inspector like Starbest for all machines and equipment they intend
to use on their site. When we are mandated by any company to
offer this service on their behalf, a technical evaluation of all the
machines to be involved in the contract is conducted.
A complete technical evaluation can be carried out on machines
like Cranes Compressor, Generators, and Welding Machines etc.
to check for Safety, Functionality and specification
conformity.These machines are then
accordingly, certified after evaluation.
D. TECHNICAL AUDIT OF TERMINAL
METERING
This is a specialized service to evaluate the performance of
metering systems, in complying with the requirements as laid
down in the American Petroleum Institute (API) Measurement
Standards. The major components of a Technical Audit are;
1. An evaluation of the condition and design of each metering
system with regards to Electronic Condition as per API
Standard.
2. Verification of throughout, calculations for Gross Measured
Volume Standard Volume Validation of any other Computer
Constants and or functions.
3. Calibration checks on Temperature and
Pressure Instrumentation.
4. Check on-line sample analysis Procedures and function
test auto sampler.
5. Establishing flow curves for meters over the flow range for
linearity and repeatability.
6. Verification of Proving calculation and examination of current
prover loop calibration Certificate, checking current base
volume is in use and correct defect switch pair is selected.
Examination of internal condition of Prover.
7. Prove that all critical valves in system are bubble tight
when closed under normal operating condition; function check
associated leak detector system.
Calibration of instrumentation can also be conducted in
the course of the exercise to reduce errors and improve
overall measurement uncertainty.
E. METERING CONSULTANCY SERVICES
The scope of consultancy covers:-
i. Design of metering systems.
ii. Review and vetting of metering systems at loading
gantry or Crude Oil terminal to ensure their conformity to
relevant International codes and Standards for accurate
measurement.
iii. Validation of flow measurement equipment.
The validation of Metering System is to make valid the
metered volumes of gas condensate on crude oil. These
services calibrate all measuring components of a metering
system which includes: Pressure Transmitters, Temperature
Transmitters,
Densitometries, Flow Computers, Parameter Input,
Calculations and Integration Check over twenty four (24)
hours. The final accuracy of a metering system is then provided
for the system as a variable called the uncertainty, which takes
into account the sum of all the instruments’ errors used in the
system.
F. GAS MEASUREMENT
With assistance of our UK based experts Starbest can Verify the
accuracy of optic measurement in accordance with either the
AGA 3 or ISO 5167 methods of flow computation.
Our tests would calibrate each component associated with the
gas meter run. The orifice plate would be inspected for upstream
condition. The differential pressure transmitter would be
calibrated using an air dead weight tester. The
temperature and pressure transmitter can be calibrated for
accurate measurement.
If gas densitometers are in use, a vacuum pump is used to
conduct the zero check to confirm the transducer performance.
Gas chromatography used for analysis of gas composition can also
be verified and or calibration to ensure actual performance.
In conclusion, using a portable computer Starbest would generate
a calculation check against the flow computer’s computer values
and ascertain the “Uncertainty” limits within which the
gas metering systems computes gas measurement in units of
volume or mass.
G. AUTO SAMPLING
We offer mobile Auto - sampling equipment to clients on hire to
assist and sellers and ship operators to obtain reliable and
representative samples during loading or discharge of oil cargoes.
It is generally accepted that physically obtained composite
samples from ships tanks underestimate the true BS &W and
density value.
The Auto-sampler allows continuous Flow Proportional sampling
at the shipboard manifold that is unbiased and accurate.
H. QUALITY ASSURANCE AND INSPECTION
SERVICES
Non-Destructive Testing (NDT)
We are positioned to be a leading organization in NDT services
to the petrochemical, refinery, oil & gas, power and steel, water,
waste, medical, engineering, construction fabrication, marine and
the automotive industrial in Nigeria. Typical services within our
scope include:
- Dye Penetrant Testing (DPT or DPI)
- Magnetic Particle Testing (MPI)
- Ultrasonic Testing (UT)
- Radiographic Test (RT)
- Metallographic Replication
- Assisted visual inspection and endoscopic inspection of
components.
- Eddy current inspection of both Ferro and non ferromagnetic
metallurgical evaluation of components.
- Internal oxide (magnetic) layer measurement using ultrasonic
methods.
These services are offered to assist in the detection and
measurement of surface and internal defects using qualified
Engineers and Technicians
Technical Training
We provide comprehensive range of technical training services
designed to meet our client’s specific requirements. These
include:-
Equipment Inspection and Training of Operators
Welding Training
Pressure System Regulation.
NDT Training for certification to ASNT Level I and II or PCN
level 1 and II through NDT Institute UK or America and NDT
Centre Nigeria. The NDT programme includes DPI, MPI,
Radiography, UT, Visual Inspection etc. tutors and lectures shall
be ASNT/PCN Levels II and II approved personnel.
Others as may be required by our clients.
Welding
The Welding Department offers a comprehensive range of
services aimed at providing total quality solutions to the
fabrication, construction and welding industries. These include:
Welding Consultancy
Welding Training
Welding Approval and Certification
Third Party Welding Inspection
Welding Co-ordination
Welding Inspection
CARGO SUPERINTENDENCE
Cargo superintendence is a process of determining the quality
and quantity of crude/petroleum products. This involves the
fiscalization and de-fiscalization of bulk crude/petroleum products
in storage tanks be it land tanks or ship tanks.
Third Party Inspection Services (Contractors)
These services aims to control the manufacturer or sub-
contractors premises, the quality of workmanship and conformity
of manufactured equipment with the purchase requirement/
specifications, applicable drawings, codes or standards. The level
of STARBEST involvement would be set in a quality plan mark up
and dependent on the equipment and applications. It may include
stages or phase inspection, witness testing or final inspection.
We support these services from all phase of delivery from the
raw materials through to completion, commissioning and
handover. The relevant components of the service are:
Manufacturing Capability Studies
Supplier/Vendors Audits
Development of Vendor Requirement
Shop Inspection
Documentation Review and Administrative Assistance:
Material Control and Warehousing Support to Maintain
Availability of Essential Parts:
Expediting and Project Monitoring
This aims at providing the progress of activities with services
predetermined time schedule based on critical part network to
detect and analyse key area, which might entail delays. The
essence of the service is to suggest constructive solutions in
order to meet the targets, inform the client of the real situation
existing and of all decisions taken to meet schedule.
Manpower Placement Services.
Provides technical manpower and consultancy support to
operators, producers, contractors, using Starbest seconded
personnel working under the clients direction and supervision in a
client representative capacity, Starbest provides qualified and
competent personnel in different disciplines including:, Project
Manager, Construction Managers, Civil Inspectors and engineers,
Architects, Standards Specifications, Constructors,
Commissioning, Electrical, Safety & Risk Assessment, Mechanical,
Chemical, Material, Pipe Line, Corrosion, Telecommunication,
Site safety coordination and Second hand equipment surveys.
(Aimed to asses second hand equipment to establish its suitability
for further use or remnant).
Statutory Inspection.
Starbest has certificated engineers, local and expatriates to
undertake these inspections. We are approved by Federal
Ministry of Labour and Productivity (Factories Act) to engage in
these services through our field engineers. We provide statutory
inspection service as part of the client’s risk assessment
programme and to meet the legal requirements for periodical
inspections. Plant and equipment
inspected include:
We provide statutory inspection service as part of the client’s
risk assessment programme and to meet the legal requirements
for periodical inspections. Plant and equipment inspected include.
Boilers.
Pressure vessel and pressurized systems
Lifting equipment and tackles.
Cranes or excavators
Power presses and forklifts
Electrical Installation
Lift and Hosts
Breakdown & condition survey
Generator
Technical audits or whole plants and equipment,
factories etc.
Consultancy Engineering Projects
Through the services of experienced engineers and technicians
Starbest are able to assist clients both in Government and Private
sectors in realizing their goals on any projects.
These include tender preparation, bidder selection process,
procurement, field execution, commissioning, and hand over of
project deliverables.
We will achieve this through our local and expatriate engineers
operating locally and engineers in India and South Africa, where
we have working agreements with recognized professional
engineering companies specialized in our areas on need. We are
also capable of recruiting specialist on project specific
requirement basis.
COMPARISON OF SHIP BOARD
MEASUREMENT AND SHORE TANKS.
The importance of ship board measurements, taken immediately
after loading or before discharge of crude oil or petroleum
product cannot be over emphasized.
They are very valuable checks on shore figures, whether these
are produced from land tank measurements or metered
quantities. In some installation, where cargo loaded are small
compared with tank and/ or pipeline capacities, the ship tanks is
bound to provide more reliable measurement than any other
source because of the complexity of pipeline system at some
terminals. In case of disputes regarding product losses, ship
figures are always regarded to be more reliable than shore
figures. This is due to intricate nature of storage terminals
pipeline system which makes it virtually impossible to be sure of
the state of all sections of line at any given time.
I. METROLOGY (INSTRUMENTS CALIBRATION
As a company that prides itself on quality service delivery and
customer satisfaction, we are prepared and we do provide
solution to calibration requirement for compliance to ISO
9001:2008 and also provide National and International Traceable
Calibration and Testing Services to industries backed up with a
team of highly qualified and experienced manpower.
With our state of the heart laboratory, we provide and delivers
efficient quality metrological services.
Scope of Instruments Calibration
Calibration of Temperature Measuring
Instruments Temperature gauges, temperature controllers,
temperature transmitters, temperature sensors (RTD and
thermocouple) and temperature indicators.
Calibration of Pressure Measuring Instruments.
Pressure gauges, pressure transmitters, pressure indicators,
pressure relief valves, pressure switches and vacuum gauges.
Calibration of Dimensional Measuring
Instruments which includes vernier calipers, micrometer
screw gauge, dial gauge, height gauge and steel rule.
Mass Calibration
Analytical balance, weighing scale and Standard Dead Weight
Calibration of Analytical and Environmental
Measuring Instruments
pH meter, conductivity/TDS meters, Hydrometer, thermo-
hydrometer and Viscosity meter
Calibration of Electrical Measuring Instruments
multimeter, clamp meter, ohm meter, reistance box,
capacitance box and earth resistance meter
Audiometric Measurement:
to determine and analyze the safe sound level in a plant,
factory or working environment
Temperature Mapping:
evaluation and profiling of cold rooms for food and
pharmaceutical products storage.
Force Calibration:
calibration of torque wrenches, tensile strength and
compression machine.
CLIENT:
Nido Gas Nig. Ltd.
Oando Nig. Plc
MRS Oil & Gas Industry Ltd.
ABC Tranport Ltd.
Nipco Plc.
Liberia Petroleum Refining Company
Honey well Oil and Gas
Murlan Nig. Ltd.
Mobil Producing Nigeria Unlimited
Nigerian AGPOIL
Total Nig. Plc
Oando, Ghana
Nigerian National Petroleum Corporation
Hart group UK
Refinery of Ivory Coast (Codevour)
NEXEN Ok Exploration Co.
Sahara Energy Ltd.
Zenon Petroleum & Gas Ltd
Folawiyo Energy Ltd
Kuramo Development
Eres
Mazin/Mobil Aviation
Pan African Investment
Chevron Oil Plc
Dee Jones
Lister Oil
Quarter Marine Ltd
ConOil Nig Plc
Orist Petroleum Ltd
Domino Pizza
Economic & Financial Crime Commission-EFCC
Sterling Oil and Exp
Vitabiotics Nig Ltd
Nivafer Construction Company Ltd.
Motara IND Ltd.
Techno Oil Ltd
Wabeco Oil Ltd
NNPC/Mazin
Unity Bank
Euro Food & Distilleries
Spog Oil Ltd
Acorn Petroleum Ltd
Total Upstream
AMNI Petroleum Ltd
Panafric Nig Ltd
Israb
Integrated Oil & Gas Ltd.
Swift Oil Ltd
MTN Nigeria
Pabe Oil & Gas Ltd
Fatgbem Oil & Gas Ltd
NNPC/Mazin & Julius Berger
Beuro Verotas Nig. Ltd
Cakasa Nig Ltd
SPDC / DICEE
SPDC/TLD
SPDC Adano
Vekof Nig Ltd
Capital oil & Gas Ltd
ISRAB Oil & Gas
Shell Petroleum Dev. Corporation
Afrilec Ltd
Total/RCC
Adano Engineering. Ltd.
NNPC Mega Station
Dicee Nig. Ltd.
OK Plastic Ltd
Atlantic Shrimpas Ltd
Clean Serve Energy Ltd.
TLD Construction Coy. Ltd.
Navgas Ltd
AMNI Petroleum Ltd
Total Upstream
Veracity Petroleum Ltd
Lafarge Nig Plc—WAPCO
Mobil Filling Station
Northwest Petroleum Ltd
Interkel Nig Ltd
Aieto Energy Ltd
H.S Petroleum Ltd
T.Time Petroleum
Lubcon Nig. Ltd.
Aero maritime
MRS/Texaco
Arik Air Ltd
MRS Aviation
Sahara Aviation
Energia Ltd.
Nigerian Manufacturing Co. Plc
(Baggo)
Northern Bag Mfg Co. Ltd
Sea Eagle FPSO SPDC
Isiaku Rabiu & Sons Ltd
Aiteo
Sambol Energy Ltd
Stallion Storage And Logistics Ltd
Bulk Strategic Reserves Ltd
Agozfrank Ventures Ltd
Olamut Transport
Ontario (Othnel & Renoir
Logistics)
Himma Marchant Ltd
Bond Global Project Ltd
Divine Successs Oil & Gas Ltd
Inspection & Calibration Services Ltd
Chips Oil & Gas Ltd Mac Inspections
Oryx Oil And Gas Ltd
Mofefak Nig Ltd
Imad Oil Ltd
All-Star Services Nig Ltd
CLIENT
Harvesters Steel Company Ltd
Divcom Construction Company
Selfa Nig. Ltd.
GlaxoSmithKline Plc -GSK Agbara
Intercontinental Hotel
Pipeline & Product Marketing Co. Ltd
Total E&P Nig. Ltd.
Dejones Oil & Gas
Seanut Engineering. Ltd
Abbey court Trading Coy Ltd
Clip Oil & Gas
Kam Ind Nig. Ltd
Kossad Oil & Gas
Vivcom Engineering Ltd
Divcon/SPDC
GODELO TechLtd
Stayworld Logistics Ltd
SARA Foam Products Ltd
BEN OZOMA
FARADAY Engineering Ltd
DKCEE NIG LTD
Alpha Theory Global Solution Ltd
Swift Inspection Services
Mo Geed Nig Ltd
Indar Nova Ltd
Dynamic Measuring Co Nig Ltd
Tradro International Ltd
Nestsach Ltd
Ass Oil And Gas Ltd
Mon Geld Nig Ltd
Prodeco Nig Ltd
The Great 4g’s Oil And Gas Ltd Taiwo & Co. Nig Ltd
Yoteco Foods Ltd
Uche Awoh Inv. Ltd
Dyko Oil & Gas
Arab Contractors
Hilos Towers
Vita Construction Ltd
ALH Waheed Nig Ltd
Eat ―N‖ Go Ltd
Jobitca Nig Ltd
Alcatel Lucent Ltd
LES Ventures Ltd
Borteir Gas Ltd
Shash IND Ltd
SGS Inpection Ltd
IBETO Group Ltd
Boteir INT’L Co. Ltd
Petroleum Warehouse Logistic and
Petroleum Storage Services Ltd
(SAHARA GROUP)
Ailos Oil & Gas Nig Ltd
Maths Metals Recycling Ltd
VIicklynProcess Contractor Ltd
JUST Supply and Packaging
JN Engineering Ltd
DHN Superm Ltd
HS Petroleum
LINK Petroleum Ltd
EBERELINKS Nig Ltd
Oyinade Technical Nig. Ltd
Gideon Muta
Egre Nig Ltd
Hitech Design Ltd
MAC Inspection Ltd
Dowel Masco Nig Ltd
Hilca Nig Ltd
BHN Ltd
Himma Merchant Ltd
Stallion Storage Logistic Ltd
Frado International Ltd
Hopic Nig Ltd
Hydrodive Ltd
Nigerian German Company –NGC
Corporate Head Office/Calibration Base:
Plot 13, Block 81, Amuwo Odofin Industrial Layout,
Okota Road,
Lagos, Nigeria
P.O. Box 3994, Marina Lagos.
Port Harcourt Office:
El-Linda Plaza
Plot 90, Peter Odili Road
Trans Amadi Industrial Layout
Port Harcourt
Managing Director:
(234) 8033011399
(234) 802-905-1959
e-mail: [email protected], [email protected] or [email protected]
General Manager:
(234) 803-859-1390
(234) 809-163-1236
e-mail: [email protected], [email protected] or [email protected]
Operations Manager:
(234) 805-402-6757
(234) 809-810-2035
e-mail: [email protected], [email protected] or [email protected]
Head, Metrology Department (Instruments Calibration):
(234) 803-879-4097
(234) 708-171-5045
E-mail: [email protected], [email protected] or [email protected]
Manager, Port Harcourt Branch
(234) 803-481-2243
(234) 805-399-4403
e-mail: [email protected], [email protected] or [email protected]