FC601

I 100Base-T1

I USB-A connector

I Windows and Linux network device

I NXP TJA1100 access

I Flexible Software APIs

The USB-Stick for Automotive EthernetCompact and flexible USB2.0 adapter

The FC601 is a pretty compact hardware design to connect Windows and Linuxbased devices with Automotive ethernet driven nodes and switches. Even designlooks pretty simple, it comes with powerful and flexible software APIs to start simpleas just a media-converter to USB, but extends to full access to TJA1100 featureslike control, diagnosis and cable-testing features.

Features

I NXP TJA1100 AutomotiveEthernet Phy

I Master/Slave switch to start simple

I Standard Network device on Linux

I USB CDC-ECM Driver byThesycon to run Windows 8/10(32/64-bit supported)

I Common C-API and pythonwrapper

I UTP connector to connectAutomotive 100Base-T1 devices

I Software API to access all featuresof TJA1100

I Easy firmware update via USB

Applications

I Windows PC as protocol analyzerfor 100Base-T1 networks

I Raspberry Pi as remote nodeI TCP/IP Nodes connected to NXP

App Board (SJA1105-Switchbased)I VLAN nodesI Device Emulation (Windows/Linux)I cable and diagnosis testing

I Point-to-Point 100Base-T1 using2xFC601

Technical Details

Basic information

I USB-Powered

I Master-Slave Switch on USB-Stick

I Based on latest NXP TJA1100

I Simple UTP connector (Tool-Less)

I Powerful and flexible API for SMIRegister Access

I Python and C++ sample applications

I Python abstraction class forTJA1100 MDIO registers

System-Overview forWindows/Linux

Applications

I Full network setup

I VLAN nodes

I NXP TJA1100 systemvalidation/emulation

System Design with NXP AppBoard

More information at www.fibrecode.com