COMP 14 Introduction to Programming Miguel A. Otaduy May 20, 2004.
-
date post
21-Dec-2015 -
Category
Documents
-
view
215 -
download
0
Transcript of COMP 14 Introduction to Programming Miguel A. Otaduy May 20, 2004.
Writing Selection StatementsWhat Type of Construct To Use?
• Only need to execute additional statements if condition is true
• Need to execute separate additional statements based on if the condition is true or false
• Need to execute different statements based on multiple conditions
• Need to execute different statements based on an expression that evaluates to a char or int
if
if-else
nested if-else
switch
Writing Selection Statements• Write the outline of the selection statement
– keywords– curly braces– case and break statements (for switch)
• Write the expression– boolean expression, or condition– expression or variable evaluating to char or int
• Write statements that execute based on the condition
Example
Write a selection statement that sets grade to 'F' if score is less than 60 and sets grade to 'P' if score is greater than or equal to 60.
1) Choose constructif-else
2) Write outlineif ( ){
}else{
}
Example
Write a selection statement that sets grade to 'F' if score is less than 60 and sets grade to 'P' if score is greater than or equal to 60.
3) Add conditionif (score < 60){
}else{
}
4) Add statementsif (score < 60){
grade = 'F';}else{
grade = 'P';}
Questions
What type of selection statement should be used?
1. Print "Male" if gender is 'M' and "Female" if gender is 'F'.
2. Print the state associated with areaCode, where areaCode is an int.
3. Print the maximum of three integers.
if-else
switch
nested if-else
Question
Assume that the lengths of 3 sides of a triangle are given in the integer variables side1, side2, and side3.
Write code that will print:– "Equilateral" if all three sides are equal– "Isosceles" if only two sides are equal– "Scalene" if no sides are equal
equilateral isosceles
scalene
First, what selection construct should be used?
nested if-else
Answer
// side1, side2, and side3 are lengths// of the sides of a triangle
if (side1 != side2 && side2 != side3 && side1 != side3)// no sides are equalSystem.out.println ("Scalene");
else if (side1 == side2 && side2 == side3)// all sides are equalSystem.out.println ("Equilateral");
else// two sides are equalSystem.out.println ("Isosceles");
Why Is Repetition Needed?• Want to add 5 integers to find their average?
– declare a variable for each integer– initialize the sum– read in the user input one at a time– sum the numbers– take the average
• Want to add 1000 integers to find their average?
repeat steps 3 and 4 1000 times
1. declare one variable for input2. initialize the sum3. read in one line of user input4. add to the sum5. take the average
Repetition Statements
• Allow us to execute a statement multiple times
• Often referred to as loops• Controlled by boolean expressions
– like selection, or conditional, statements
• Java has three kinds of repetition statements:– the while loop– the for loop– the do loop
Loops
• Must use a loop control variable– controls how many times to loop
• 4 Parts to Every Loop– initialization - set loop control
variable before condition– condition - when to stop– update - change the loop control
variable– body - actions to repeat
Typical Uses of Loops
• Repeat a section of code a specified number of times - counter-controlled
• Repeat a section of code (reading input) until a specific value is read - sentinel-controlled
• Repeat a section of code (reading input) until a valid value is entered - input validation
• Repeat a section of code (reading from a file) until the end of the file is reached - EOF-controlled
• Repeat a section of code until a boolean variable becomes false - flag-controlled
The while LoopSyntax
while ( condition ){ loop body;}
while is areserved word
If the condition is true, the loop body is executed.Then the condition is evaluated again.
The loop body is executed repeatedly untilthe condition becomes false.
The while Loop
• Syntaxwhile (expression)
statement
• Expression is always true in an infinite loop
• Statements must change value of expression to false
The while LoopExample
final int LIMIT = 3;
int count = 0;
while (count < LIMIT)
{
System.out.println (count);
count++;
}
System.out.println (“All done!”);
booleancondition
loopbodyupdate
initialization
Output:012All done!
The while LoopWhat's Going On?
final int LIMIT = 3;int count = 0;
while (count < LIMIT){System.out.println (count);count++;
}
System.out.println (“All done!”);
LIMIT count
Output:
3 0
1
0
1
2
All done!
2
3
The while Loop
final int LIMIT = 3;
int count = 0;
while (count < LIMIT) {
count++;
System.out.println (count);
}
System.out.println (“All done!”);
Output:123All done!
The while Loop
final int LIMIT = 3;
int count = 0;
while (count < LIMIT) {
System.out.println (count);
}
System.out.println (“All done!”);
Output:0000000000...
The while Loop
final int LIMIT = 3;
int count = 0;
while (count <= LIMIT) {
System.out.println (count);
count++;
}
System.out.println (“All done!”);
Output:0123All done!
The while Loop
• If the condition of a while statement is false initially, the loop body is never executed
• The body of a while loop will execute zero or more times
Counter-Controlled while Loop• Used when we know exactly the number of
times to execute the loop• Basic Form:
counter = 0;
while (counter < N)
{
...
counter++;
...
}
N is the numberof times theloop should execute
Examplefinal int NUM_STUDENTS = 100;int sum = 0;double average;int i = 0; // initialize loop control var
while (i < NUM_STUDENTS){sum += Integer.parseInt(inFile.readLine());i++; // update loop control variable
}average = (double) sum / NUM_STUDENTS;
Often we use i, j, k as counter variable names.
Reading From a File
• How do you know how many items there will be?
1. ask the user2. arrange the data file so that the first item
is the number of items in the file
• Other ways to read all of the items:– use sentinel value– read until end-of-file (EOF)
Sentinel-Controlled while Loop
• Used when exact number of entry pieces is unknown but last entry (special / sentinel value) is known
• Basic Form:
input the first data item into variable
while (variable != sentinel)
{
...
input a data item into variable
}
Exampleint i = 0, sum = 0, score;final int SENTINEL = -99;double average;
// initialize the loop control variablescore = Integer.parseInt(inFile.readLine());while (score != SENTINEL){sum += score;// update the loop control variablescore = Integer.parseInt(inFile.readLine());
}average = (double) sum / NUM_STUDENTS;
Average.java Example
• Read in integers and print their sum until the user enters 0
• Print the average of the numbers entered
Input Validation while Loop
• Used to ensure that the user enters valid input
• Basic Form:
input the first data item into variable
while (variable is not in valid range)
{
ask the user for valid input
input a data item into variable
}
Example
int num;
// initialize loop control variableSystem.out.print (“Enter a number [0-100]: ");num = Integer.parseInt(keyboard.readLine());
while ((num < 0) || (num > 100)){
System.out.println (num + " is not [0-100]");System.out.print (“Enter a number: “);// update the loop control variablenum = Integer.parseInt(keyboard.readLine());
}System.out.println (“You entered “ + num);
Flag-Controlled while Loop• Boolean value used to control loop• Basic Form:
boolean found = false;
while (!found)
{
...
if(expression)
found = true;
...
}
EOF-Controlled while Loop• Used when input is from a file• Sentinel value is not always appropriate• Basic Form:
inputLine = inFile.readLine();while (inputLine != null){
...inputLine = inFile.readLine();
}null is a reserved word