Comm.SEC hardware, firmware and software products, solutions and services

InterLINK - SparONE

Communication, Automation, Control and Video Processor for Residential and Industrial Applications

Standard: 5Vdc GNU/Linux Application SERVER Optional: 12/24Vdc GNU/Linux Application SERVER

• 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU Broadcom BCM2835

• GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode

• GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure

• 512MB RAM

• Class 4 SD-HD socket 2min … 32max GB with GNU/Linux Server based on DEBIAN

• 2 x USB 2.0 sockets

• 10/100 Mbps Ethernet socket

• Standard 5Vdc @ 700mA, Optional 12/24Vdc @ 350mA

• 4 Units DIN Rail Enclosure

http://www.commsec.it - [email protected]

Tutti i prodotti Comm.SEC sono distribuiti in esclusiva da EUROGI srl - Tel.(+39) 0125 58 859 - [email protected] - www.eurogi.it

http://www.commsec.it/www.eurogi.it/

mailto:[email protected]?Subject=Prodotti%20Comm.SEC

mailto:[email protected]

http://www.commsec.it/

InterLINK - SHELLo

PRELIMINARY INFORMATIONS – COMING SOON

DIN Rail Box for Raspberry-PI type A and B

• Raspberry-PI type A and B compatible

• 4 units DIN Rail BOX

• 35 mm Height

• Standard material is Blend PC / ABS

• Standard color is Light Gray RAL 7035

• Supplied with rubber seal to fix Raspberry-PI

• Easy to assemble

• Holes for Ethernet, USB, SDHC Card, HDMI and 5Vdc MicroUSB







InterLINK - DINo


Smart I/O Controller with 28 Local Analog and Digital I/O and large EEPROM.USB, I2C and RS485 Communication for Local I/O access and Bus I/O Expansions.

• Usable as an USB based InterLINK-Server to monitor and control the full Local I/O and Resources (License type YELLOW and RED)

• Usable as an USB based InterLINK-ModbusRTU Gateway/Master to monitor and control ModbusRTU I/O Modules over the RS485 Bus (License type YELLOW)

• Usable as an USB based InterLINK-I2C Bus Gateway/Master to monitor and control I2C Modules over the internal I2C Bus Extender (License type YELLOW)

• Usable as a Slave ModbusRTU I/O Module (License type RED)

• Usable as a Slave I2C I/O Module (License type RED)

• ATmega 32u4 RISC processor at 16MHz

• 2.5 Kbytes internal RAM

• 1 Kbytes internal EEPROM

• 128 Kbytes external EEPROM

• 32 Kbytes internal FLASH with 4 Kbytes Bootloader

• Operating Voltage 5Vdc +/-10% @ 100mA max

• The regulated 5Vdc power supply can come either from 5Vdc screw terminals or supplied by USB connector

• USB 2.0 micro socket for Serial Communication over USB

• 8 Digital Outputs, 6 of them with PWM functionality, 50Vdc max @ 500mA open-collector relays drivers with common clamp diodes

• 4 Analog Inputs with 0...10V protected inputs usable like Digital Inputs

• 16 Digital Inputs for dry-contacts with internal pull-up

• RS485 Bus, with shield screw terminals and communication LEDs, for up to 1200 meters communications at 9600bps … 38400bps

• I2C Bus Extender with 400 kHz operation over at least 20 meters of wires

• Running and Power LEDs

• Compatible with Arduino LEONARDO

• Easily accessible from any Host via USB (using any License) and ModbusRTU / I2C (using License type RED)

• 4 Units DIN Rail Enclosure







InterLINK – Camillo GIALLO

Smart I/O Controller with InterLINK Server, ModbusTCP Server, InterLINK and ModbusTCP Gateway from Ethernet to ModbusRTU Client on the RS485 local network

Comm.SEC develop, support and sell CAMILLO firmware licenses, that use the CHAMELEON hardware platforms from EurogiDevices, for creation of a Smart I/O Controllers powered with the InterLINK and ModbusTCP / ModbusRTU protocols.

Smart I/O Controller CHAMELEON with CAMILLO GIALLO firmware license features:

• USB 2.0 socket • 10/100 BaseT Ethernet socket• RS485 local network socket• 12 to 24Vac +5%/-10%, 15 to 30Vdc +/-10% external power supply• 100 mA @ 24 Vdc, 2.5W typ • 4 Optoisolated Digital Inputs with 2 Fast Digital • 8 Output NMOS open-drain, 100 Vds max @ 1 A max• 2 Analog Inputs 0...10V• 4 configurable Analog Inputs 0...10V or Analog Outputs 0...10V with / without filter for

Dimmer or PWM output functions at 10mA• 6 Units DIN Rail Enclosure

• USB-Serial used as Console serial terminal• TCP/IP over Ethernet used for HTTP, Syslog, Telnet and ModbusTCP protocols• ModbusRTU Client over RS485• InterLINK Server on USB-Serial Console, HTTP web-services and Telnet• ModbusTCP Server • InterLINK to ModbusRTU Gateway from USB-Serial Console, HTTP web-services and

Telnet• ModbusTCP to ModbusRTU Gateway







InterLINK – Camillo ROSSO

Smart I/O Controller with InterLINK Server, ModbusTCP Server on Ethernet, ModbusRTU Server on RS485 local network


Smart I/O Controller CHAMELEON with CAMILLO ROSSO firmware license features:



• USB-Serial used as Console serial terminal• TCP/IP over Ethernet used for HTTP, Syslog and Telnet• InterLINK Server over RS485• InterLINK Server on USB-Serial Console, HTTP web-services and Telnet







InterLINK – Camillo VERDE

Smart I/O Controller with InterLINK Server on Ethernet and on RS485 local network


Smart I/O Controller CHAMELEON with CAMILLO VERDE firmware license features:



• USB-Serial used as Console serial terminal• TCP/IP over Ethernet used for HTTP, Syslog, Telnet and ModbusTCP protocols• ModbusRTU Client over RS485• InterLINK Server on USB-Serial Console, HTTP web-services and Telnet• ModbusTCP Server • InterLINK to ModbusRTU Gateway from USB-Serial Console, HTTP web-services and

Telnet• ModbusTCP to ModbusRTU Gateway







InterLINK - STRINGHER


Smart I/O Gateway with InterLINK and ModbusTCP Gateway from Ethernet to ModbusRTU Client on the RS485 local network

Comm.SEC develop, support and sell CAMILLO firmware licenses, that use the STRINGHER hardware platforms from EurogiDevices, for creation of a Smart I/O Gateway powered with the InterLINK and ModbusTCP / ModbusRTU protocols.

Smart I/O Gateway with CAMILLO GIALLO firmware license features:

• 10/100 BaseT Ethernet socket• RS485 local network socket• I2C Bus Master for I/O Expansion• 12 to 24Vac +5%/-10%, 15 to 30Vdc +/-10% external power supply• 50 mA @ 24 Vdc, 1.2W typ • 2 Units DIN Rail Enclosure

• TCP/IP over Ethernet used for HTTP, Syslog and ModbusTCP protocols• ModbusRTU Client over RS485• InterLINK Server on HTTP web-services and Telnet• ModbusTCP Server • InterLINK to ModbusRTU Gateway from HTTP web-services and Telnet• ModbusTCP to ModbusRTU Gateway• InterLINK and ModbusTCP Gateway to I2C Bus Master for I/O Expansion







InterLINK - DICCI'

DC/DC power supply and battery backup support

Comm.SEC develop, support and sell hardware, firmware and software of residential and industrial applications that use mixed 32 and 8 bits controllers platforms.

The controllers platforms are usually placed together in one or more distributed “Smart BOX” that perform the required residential or industrial applications.

For safety purpose the power supplies and the main electricity interfaces are all usually placed in one or more distributed “Power BOX”.

The DICCI' dc/dc power supply placed into a “Power BOX” supply energy to “Smart BOX” 5Vdc powered controllers. The inputs power of DICCI' come from a main ac/dc power supply or a 12Vdc battery to assure energy backup in case of main failure to the “Smart BOX” 5Vdc powered controllers.

Standard version:• Insulated DC/DC Converter• 10 to 36 Vdc Input Voltage from main AC/DC Power Supply or Backup Battery• 5 Vdc Output Voltage • 1 A Output Current• DC Out LED• Short Circuit Protection• Overload Protection• 1 Units DIN Rail Enclosure

Optional version:• DC/DC Converter• 10 to 40 Vdc Input Voltage from main AC/DC Power Supply or Backup Battery• 5 Vdc Output Voltage • 1,5 A Output Current• DC Out LED• Short Circuit Protection• Overload Protection• 1 Units DIN Rail Enclosure







InterLINK – BITLASH Interpreter & Shell

A programmable command shell that use Wired/C language of Arduino's for writing persistent scripts on platform with Camillo firmware

Bitlash is an open source interpreted language shell and embedded programming environment for the popular and useful Wired/C language used by Arduino hardware platforms.

The Bitlash interpreter for integration in the Camillo firmware licenses runs entirely on the Arduino compatible hardware platform, like CHAMELEON of EurogiDevices, and interprets commands that you type in a terminal window and/or read from EEPROM script:

It's easy to extend Bitlash by naming a sequence of commands as a Bitlash function, which is like a new word in the Bitlash language. A Bitlash application is a set of such functions, and since they are stored in the EEPROM, Bitlash can start up your application automatically at boot time for standalone operation.In cases where you need native C code to get closer to the hardware, perhaps for speed or to interface with a custom peripheral, it's also easy to integrate your C code with Bitlash as a User Function.

As scripting languages are for Internet applications, Bitlash is for embedded ones. Test your embedded C code by interacting with it through Bitlash user functions over USB-Serial interface. Configure and manage your application from Bitlash rather than some hokey syntax that you cooked up for that one purpose, that's already getting in the way and won't make any sense to you when you need to extend it six months from now.At the low end, Bitlash runs fine on an Arduino compatible platforms, leaving most of the space for your app. On an Arduino compatible AVR Mega 2560 platform like CHAMELEON, medium Bitlash apps are possible, the only limit is the 4K bytes internal EEPROM memory used for script persistence and (256 bytes) CAMILLO persistent resources.

As an example you can make a Bitlash-powered automation controller and interacting with it using Bitlash via TELNET (actually this feature it is not yet implemented on CAMILLO Licenses).



https://github.com/billroy/bitlash/wiki/functions





https://github.com/billroy/bitlash/wiki/userfunctions

On Demand APPLICATIONS

Comm.SEC develop, support and sell firmware licenses for Mesurement, Automation and Control for any on-demand application required by Customers.Comm.SEC uses all owned programming skill, electronic and communications knowledge, hardware owned platforms like SparONE, or technology partner software and platform, like CHAMELEON and STRINGHER of EurogiDevices and HORUS of Penta Dynamic Solutions to fullfill specific Customes application requirement not actually covered by it's already available vertical solutions.







Comm.SEC hardware, firmware and software products, solutions and services

Technology

Transcript of Comm.SEC hardware, firmware and software products, solutions and services