COMMERCIAL ROOFING - IKO€¦ · Thank you for considering IKO Premium Roofing products. For...
Transcript of COMMERCIAL ROOFING - IKO€¦ · Thank you for considering IKO Premium Roofing products. For...
Diamond Shield
L&M
WARRANTY PROGRAMS C O M M E R C I A L R O O F I N G
IKO L&M WARRANTY PROGRAM FOR BUILT UP ROOFING
SURFACING FLASHINGS
5 Year
4 Ply No. 15 Single Pour2 Ply Mod-Bit
3 Ply No. 15 & 180 or 250 Cap4 Ply No. 15
10 Year
4 Ply No. 15 Single Pour 2 Ply Mod-Bit
4 Ply Type IV Single Pour 2 Ply Mod-Bit
4 Ply Type 6 Single Pour 2 Ply Mod-Bit
15 Year
1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 95 or 180 & 3 Plies Type 6 Single Pour 2 Ply Mod-Bit
20 Year
1 Ply 180 & 4 Plies of Type IV Single Pour 2 Ply Mod-Bit
1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit
** Flashings are 2 Ply Polyester
IKO L&M WARRANTY PROGRAM FOR MOD-BIT ROOFING
BASE SHEET CAP SHEET
10 Year
95 180 or 250 or ArmourCool or Prevent 250 or HD Cap
180 180 Base with Pour & Gravel
15 Year
180 250 or ArmourCool or Prevent 250 or HD Cap
HD 250 or ArmourCool or Prevent 250 or HD Cap
Fast-N-Stick 250 or ArmourCool or Prevent 250 or HD Cap
ArmourBond (Flash or 180) 250 or ArmourCool or Prevent 250 or HD Cap
ArmourVent 250 or ArmourCool or Prevent 250 or HD Cap
Cold Gold Base 250 or Prevent 250
20 Year
180 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
HD 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
Fast-N-Stick 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
ArmourBond 180 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
** Flashings are 2 Ply Polyester
Limited Labour and Membrane
Warranty (L&M)
This limited warranty is applicable to
commercial systems installed by an
IKO Registered Roofing Contractor
on commercial / industrial buildings.
The L&M is not pro-rated and covers
manufacturing defects resulting in
roof leaks and has a non-prorated
labour inclusion for IKO to pay for the
repair / replacement of the defective
material. To obtain an L&M warranty the
contractor must be an IKO Registered
Roofing Contractor and possess current
liability insurance. The contractor
should completely fill-out the limited
warranty application and submit it to
IKO Technical Services / Commercial
Warranties for processing.
IKO DIAMOND SHIELD WARRANTY PROGRAM FOR BUILT-UP ROOFING
SURFACING FLASHINGS
10 Year
4 PlyType IV Single Pour 2 Ply Mod-Bit
4 Ply Type 6 Single Pour 2 Ply Mod-Bit
15 Year
1 Ply 95 or 180 & 3 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 95 or 180 & 3 Plies of Type 6 Single Pour 2 Ply Mod-Bit
20 Year
1 Ply 180 & 4 Plies Type IV Single Pour 2 Ply Mod-Bit
1 Ply 180 & 4 Plies of Type 6 Single Pour 2 Ply Mod-Bit
** Flashings are 2 Ply Polyester
IKO DIAMOND SHIELD WARRANTY PROGRAM FOR MOD-BIT ROOFING
BASE SHEET CAP SHEET
10 Year
95 180 or 250 or ArmourCool or Prevent 250 or HD Cap
180 180 Base with Pour & Gravel
15 Year
180 250 or ArmourCool or Prevent 250 or HD Cap
HD 250 or ArmourCool or Prevent 250 or HD Cap
Fast-N-Stick 250 or ArmourCool or Prevent 250 or HD Cap
ArmourBond (Flash or 180) 250 or ArmourCool or Prevent 250 or HD Cap
ArmourVent 250 or ArmourCool or Prevent 250 or HD Cap
Cold Gold Base 250 or Prevent 250
20 Year
180 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
HD 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
Fast-N-Stick 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
ArmourBond 180 250 (5.0) or ArmourCool or Prevent 250 or HD Cap
** Flashings are 2 Ply Polyester
Diamond Shield Limited Warranty
The Diamond Shield Limited Warranty
is applicable to commercial systems
installed on a commercial / industrial
building by an IKO Registered Roofing
Contractor with current liability
insurance. The Diamond Shield Warranty
is not pro-rated and covers repair or
replacement of the IKO commercial /
industrial roofing products without
cost to the Owner. Please refer to the
Diamond Shield Limited Warranty or
contact your local IKO representative
for information on the supporting
documentation required for warranty
issuance. A Diamond Shield Limited
Warranty is assessed a fee based on
roof size and warranty term requested.
Please refer to a sample copy of the
Diamond Shield Limited Warranty for
further information.
Note: The coverage is not prorated. (reference Canadian Commercial & Industrial Limited Warranty
Chart for details) The Diamond Shield application should be sent to IKO at least two weeks prior to
job commencement and include a copy of the roof schematic, roof details (flashings, penetrations etc.)
and written specification to ensure that the proposed system complies with IKO requirements.
DIAMOND SHIELD WARRANTY FEES
TERM FEES
5 Years $ 0.06 / sq.ft. min. $ 600.00
10 Years $ 0.11 / sq.ft. min. $ 900.00
15 Years $ 0.15 / sq.ft. min. $ 1,200.00
20 Years $ 0.20 / sq.ft. min. $ 2,000.00
Thank you for considering IKO Premium Roofing products.
For additional information on IKO’s full line of superior Commercial/Industrial Roofing and Waterproofing products
please call: 1-855-IKO-ROOF (1-855-456-7663), or visit our web site at: www.iko.com
Note: The information in this document is subject to change without notice.
IKO assumes no responsibility for errors that may appear in this document.
© Copyright 11/13 · MM1L189
IKO offers a range of commercial roofing warranties from pro-rated Limited Material Warranties
to Diamond Shield Limited Warranties which cover materials and workmanship.
Regarding the Limited Material Warranty coverage, the contractor does not need to be registered
or approved in any way by IKO. The warranty is issued through dealers, and only requires the
contractor’s signature to be valid.
The Limited Labour and Membrane Warranty and the Diamond Shield Limited Warranty require
the contractor’s company be an IKO Registered Roofer. Information on registration procedures
and required training programs can be obtained from your roofing products distributor, or your
IKO Representative.
Please ask your IKO Technical Service Manager for specific
information and processing details for the level of warranty
coverage you require.
Correspondence and questions should be directed to:
IKO Technical Services
Commercial Warranties
80 Stafford Drive, Brampton, ON
Phone: 1-888-766-2468
email: [email protected]
IKO Commercial Roofing Warranties:
Application for Limited Diamond Shield Warranty
MM3L203_1013
1. Roofer Company: ___________________________________________________________________________ Ph.#: ______________________________ 2. Address: __________________________________________________________________________________ Fax #: ____________________________ 3. Roofer’s IKO Registration No.: (SPECIFY BUR OR MODBIT) ____________________________________________________________________________ 4. Insurance Co. & Policy #: _____________________________________________________________________ Policy Expiry Date: __________________ 5. Building Owner’s Name: _____________________________________________________________________ Ph.#: ______________________________ 6. Address: __________________________________________________________________________________ Fax #: _____________________________ 7. Name of Building: _______________________________________________________________________________________________________________ 8. Installation Address: _____________________________________________________________________________________________________________ 9. Intended Use: __________________________________________________________________________________________________________________ 10. Roofing Material Distributor: ______________________________________________________________________________________________________ 11. Consultant/Inspector: _________________________________________________________________________ Ph.#: ______________________________ 12. Address: ___________________________________________________________________________________ Fax #: _____________________________ 13. Architect/Specifier: __________________________________________________________________________ Ph.#: _____________________________ 14. Address: __________________________________________________________________________________ Fax: _______________________________
ROOF DESIGN, ROOF SIZE & BUILDING DIMENSION INFORMATION
15. Installation Size (square feet): __________________________________________________ 16. Roof Slope%: _____________________________________ 17. Parapet Height (inches): _______________________________________________________ 18. Building Height (feet): ______________________________
ROOF TYPE, DECK TYPE & EXISTING CONSTRUCTION
19. Roof Construction Type: ☐New Construction ☐Re-cover (no tear-off) ☐Complete tear-off ☐Partial tear-off (explain with cover letter)
20. Roof Deck: ☐Steel ☐Structural Concrete ☐Wood Plank ☐Plywood ☐Other: _________________ Gauge, PSI, Thickness: __________________
21. Existing Insulation: ☐Fibreglass ☐Perlite ☐Fibreboard ☐Isocyanurate ☐Other (specify): _____________________ Thickness: __________________
22. Existing Roof: ☐EPDM ☐BUR (☐gravel ☐smooth) ☐Coal Tar Pitch ☐Mineral Cap ☐Sprayed Urethane ☐Other (specify) __________________
NEW THERMAL INSULATION, NEW COVERBOARD & NEW INSULATION ASSEMBLY ATTACHMENT
23. Vapour Barrier/Retarder: _______________________________ ☐None 24. IKO Thermal Insulation: ☐IKOTherm ☐None ________________ 25. Sloped Thermal Insulation: Manufacturer: _____________________________________________________________________________________________ ☐Isocyanurate ☐Expanded ☐Polystyrene ☐Fibreglass ☐Perlite ☐Extruded Polystyrene ☐Composite ☐Type X Gypsum
Other (specify): ______________________________________________________________ 26. IKO Insulation Overlay ☐CoverShield ☐Protectoboard ☐None
27. Sloped Insulation Overlay: Manufacturer ___________________________________ ☐Fibreboard ☐Perlite ☐Fibreglass ☐Other (specify) _______________
28. Thermal Insulation Attachment (if applicable): ☐Asphalt ☐Adhesive☐Mechanically Fastened (accepted fasteners) Fastening Rate: _____________________
29. Insulation Overlay Attachment (if applicable): ☐Asphalt ☐Adhesive ☐Mechanically Fastened (accepted fasteners) Fastening Rate: ____________________
INSULATION & BASE SHEET FASTENERS / ASPHALT
30. Fastener Manufacturer: _____________________________ Fastener Type: __________________________ Fastener Length (inches): ____________________ 31. Asphalt Manufacturer: ☐IKO ☐Other (specify) __________________________________ 32. Asphalt Type: ☐Type I ☐Type II ☐Type III
33. Cold Adhesive System: ☐IKO Cold Gold ☐Other Adhesive Manufacturer & Type: ________________________________________________________________ 33. IKO Primers Used: _______________________________________________________________________________________________________________
MEMBRANE ASSEMBLY: BASE SHEETS, PLY SHEETS & CAP SHEETS
35. Base (if applicable) (e.g. Modiflex MF-95-FS): _________________________________________________________________________________________ 36. Ply Sheets (if applicable) (e.g. Type IV Glass Ply): ______________________________________________________________________________________ 37. Cap Sheet (if applicable) (e.g. Torchflex TP-250-CAP): ___________________________________________________________________________________ 38. Base Flashing (e.g. Armourbond Flash): ______________________________________________________________________________________________ 39. Cap Flashing (e.g. Torchflex TP-180-CAP): ____________________________________________________________________________________________
SURFACING: COATING / AGGREGATE
40. Coating: Manufacturer: __________________ Type: _________________ 41. Gravel Type / Green Roof: ___________________ lbs./sq. ft. ______________ 42. Modular Green Roof (MGR) Modules (Size and number): _________________________________________________________________________________ 43. Other products used, not listed above (eg. Primers, bitumen, cafts, etc.): ____________________________________________________________________ I understand that this warranty will be null and void if any of the information above is inaccurate. By signing this application form, I hereby acknowledge that I have read, understood, and complied with the terms and requirements of the IKO Limited Warranty being applied for. I further acknowledge that for DSLW’s I am responsible for any workmanship deficiencies occurring in the initial 2 years of warranty coverage, and all workmanship deficiencies for all other IKO warranties.
Officer: ____________________________________ Date: ______________________________________ IKO Sales Rep: _____________________________ Roof Accessibility: ☐No Ladder Needed ☐Ladder at Job Site ☐Ladder will be provided by roofing contractor
Project Starting Date: ___________________ Approximate Project Completion Date: ____________________ Warranty Period applied for: __________________ mm/dd/yyyy mm/dd/yyyy years NOTE: OFFICIAL DATE OF SUBSTANTIAL COMPLETION OF ROOF MEMBRANE MUST BE FORWARDED TO IKO AFTER ROOF IS DONE For this warranty to be valid, IKO, the Distributor and the Roofer must pay in full for materials and/or labour.
THIS COMPLETED FORM SHOULD BE FORWARDED TO THE ATTENTION OF: IKO COMMERCIAL WARRANTIES, 80 STAFFORD DRIVE, BRAMPTON, ONTARIO L6W 1L4. FAX COPIES ARE ALSO PERMITTED. FAX TO (905) 457-‐3196 OR EMAIL: [email protected]