Commercial Education - Custom Air Products & Services · preventative maintenance agreements....
Transcript of Commercial Education - Custom Air Products & Services · preventative maintenance agreements....
Founded in 1996
Privately held Texas Corporation
Over 300 highly skilled employees
120 Plus Service Vehicles
Headquarters: Houston, Texas
Over (300,000 ft2) on approximately 16 acres which consist of Corporate Offices,
Service & Plumbing Department, Part Distribution, Manufacturing /Fabrication
Facilities, Testing and Mechanical Field Services
Parts: HVAC Parts Division Fully Stocked Replacement & Warranty Components
OEM Parts
Available 24/7/365
Design/Build: Manufacturing Division Engineering / Design Services
Equipment Fabrication & Manufacturing
Electrical Modifications and Custom Controls
Painting & Custom Coatings
Equipment Retrofit & Rebranding
Install: Mechanical Field Services Division Equipment Installation
Sheet Metal/Piping
Equipment Start Up and Commissioning
Service: HVAC Services Division HVAC Equipment Service, Repair and Maintenance
Equipment Training Services
IAQ/Duct Cleaning Services
ELECTRICAL / PIPING
ENGINEERING / PAINT /QC
SERVICE
MECHANICAL FIELD SERVICE
PARTS / TESTING
35 Southbelt Industrial Dr. Houston Texas 77047 Located in the Industrial Corridor of the SW Corner of Highway 288 South and Beltway 8
Campus
Safety Experience & Rate
2017
0.41 = Total Recordable Incident Rate (TRIR)
558,693 Man Hours
0.62 = Experience Modified Rate (EMR)
2016
0.00 = Total Recordable Incident Rate (TRIR)
533,578 Man Hours
0.62 = Experience Modified Rate (EMR)
2015
0.00 = Total Recordable Incident Rate (TRIR)
519,237 Man Hours
0.66 = Experience Modified Rate (EMR)
Dedicated Quality Control Manager on Every
Project
Daily Project QA Evaluations
Routine Equipment QA Inspections
QA/QC provides accountability to Customers
and Procedures
Lessons Learned Philosophy
Certified PMP-Project Managers
Projects are monitored using Microsoft Project to
manage production and delivery schedules
Industrial & Commercial Customers • MD Anderson
• Memorial Herman
• Memorial Southwest & Northwest
• Methodist Hospital
• Shriners Hospital
• University of Texas Medical Branch
• City of Houston Lab
• Surgicare
• ABB
• Siemens
• Yokogawa
• Baker Hughes
• Dow Chemical
• Koontz-Wagner
• PEMEX
• Johnson Controls, Inc.
• National Oilwell Varco (NOV)
• Powell Electric
• ExxonMobil
• ABB
• Bayer Chemical
• BP
• Fluor
Custom / Design Build HVAC Service &
Solutions • Commercial Buildings
• Analyzer / Powerhouse Specialist
• Oil & Gas Drilling Rigs
• Portable / Rental Equipment
• Marine / Offshore
Government • Lockheed Martin
• University of Houston
• University of Texas
• Western State Oklahoma Stated College
• Air Force Academy
• Lamar University
• Houston ISD
• Fort Bend ISD
• Dayton ISD
• Sweetwater ISD
• Richmond State School
• City of Corpus Christi
• City of Beaumont
• Dallas Waste Water Treatment Plant
Engineered - PE’s on staff - Design Build - To stand alone or to fit your existing equipment's footprint
Capability to manufacture, paint / custom coatings, electrical and explosion proofing for the commercial and industrial industries
Provide fabricating, electrical and coating modifications to existing equipment
Hours of Operation
24/7
Engineering Logic Customer Specified or Industry Selected Components
Electronically commutated motors (ECMs) vary the motor RPMs in response to changing system conditions.
EC relief & supply fan grid with motorized impeller and airfoil blades allow for easy commissioning with control/motor/fan components suitably matched to each other along with the precision control of airflow, low noise, and exceptional efficiency.
Working to maintain a programmed air flow (CFM), based on occupancy and outdoor conditions, the CAPS AHU units with selected options recognizes up to 60% reduction in energy consumption.
Engineering Efficiency SEMCO Fusion Energy Wheel
Aluminum fluted and coated to maximize latent recovery
Recovery performance & pressure loss certified by AHRI
Fully UL-900 compliant
Manufacturing Division
Air Handling Units-(DX, Chilled Water, Steam & Hot Water)
Self Contained Air Conditioning Unit
100% redundant HVAC and Pressurization Systems
Explosion Proof Air Conditioning Equipment
Electrical Cabinet Coolers
Portable / Rental Equipment Packaging
Wall Mount HVAC Package Units
Chemical Filtration Systems
TYPES of Manufactured CAPS Equipment:
Three (3) Styles of Construction:
Unitized, Modular & Knock-Down
Modular System Components
Unitized Construction
Modular Construction
Knock-Down
NEC Standards for Division 1 and 2 locations
IEC Standards for Zone 1 and 2 locations
ABS & SMACNA construction standards
ASHRAE standards
The ETL Mark is proof of product compliance to North American safety standards.
A QMS certified according to ISO 9001 specifies who is responsible for which quality-related activities and which procedures are to be complied with.
UL brings clarity and empowers trust to support the responsible design, production, marketing, and purchase of the goods, solutions, and innovations of today and tomorrow.
QPS Accreditation demonstrates that the organization in question is fully qualified to test and certify products to the standards for which it is accredited.
CSA Group is a global provider of testing, inspection and certification services for products from a wide range of market sectors, and a leader in safety and environmental certification for Canada and the US.
75,000 CFM Roof Top AHU
Modular System Construction Completed Roof Top Unit
On Location in Colorado Springs, Colorado
Heat Pipe & Enthalpy Core Plate Exchanger AHU
effective and affordable energy recovery
DESIGN VIEW
BUILD VIEW
Interior: General Purpose
Exterior: Class 1, Division 2, Groups C & D
12 ½ Ton Trane Package Unit
with Pressurization
NEMA-7 Enclosure
Custom cabinet and coil coating designed to meet the needs of harsh chemical and extreme temperature environments Can be done at the OEM level; before, during and after installation Energy Guard coating for coils, components and unit rejuvenation Energy Guard protects YOUR equipment
Our MFS Division designs, selects and installs HVAC systems for Commercial and Industrial applications.
CAPABILITIES:
Renovations & retrofits
Custom sheet metal ductwork
Piping spool assemblies
Custom DX, chilled & hot water piping installation
System equipment start up and commissioning
Mechanical Field Service Division
Hot Water & Chill Water Coils
Project: 100% Outside Air Location: Houston, Texas
Timeframe: 3 day Demo/Install
Removed Equipment New Equipment: 9 Fan Array
Filter Racks Complete Mechanical System
Project Change Out – 100% Outside Air – Air Handler
Mechanical Field Service Division Project Change Out –Chilled Water AHU
Day 1 (Friday Evening) Disconnecting unit
Day 2 (Saturday Morning) Demo unit
Day 2 (Saturday Afternoon) Knock down AHU delivered
Day 3 (Sunday Afternoon) In place and running
Mechanical Field Service Division
Project: Chilled Water AHU & Duct Install Location: Florida
BEFORE
AFTER
World wide service available
Startup & commissioning services
Technical training & support
Single source HVAC Service Provider
Quick response 24/7
Large service fleet (120+ service vehicles)
We Service All Makes and Models
Chillers
Air Handler Units Roof Top Units Split systems.
Computer room units. Exhaust & make-up air units.
Portable rental equipment. Refrigeration equipment.
Ice machines. Building automation.
EMS-energy management systems. Air scrubbers.
Air filtration systems and components. Boilers.
Water heaters. Plumbing systems and fixtures.
On-site Service, Repair and Maintenance of all types of heating, ventilation, air conditioning & refrigeration systems for the commercial & industrial
applications.
Extend the life of your equipment and cut down on repair costs!
Our Preventive Maintenance team provides complete turnkey services, including scheduled air filtration replacements, custom fittings, and facility
evaluations and recommendations for all types of commercial and industrial businesses.
•We design custom maintenance solutions that revolve around your individual facility needs:
Monthly, quarterly, and annual preventative maintenance agreements. Comprehensive maintenance agreements. Test and inspection services for HVAC & plumbing systems. IAQ duct cleaning services. Water treatment and conditioning services. Monthly or quarterly filter change outs (all sizes and efficiencies available). Media bed testing and service. Coil cleaning.
Custom Air Products & Services provides a wide range of plumbing service and maintenance programs for both
commercial or industrial facilities.
If it is leaking or clogged, we’ve got you covered!
Factory Tours & Customer Training:
Factory tours promotes customer feedback and establishes a “partnering relationship”
Customer training provides an opportunity to learn all details and features about your equipment
40,000 ft² of fully stocked replacement & warranty components
Reduced downtime
Available 24/7/365
Online warranty claims portal
Matt Phil
Carl Mark Andrew
Don
Ronnie
We are here to be your HVAC Solutions
Provider…..Let us know how we can Help!
In order to maintain our position as a world class manufacturer and service company, we have committed and continued to invest in
our company through manufacturing equipment, technology, training and most importantly, PEOPLE.
THANK YOU!
Custom Air Products & Services, Inc. 35 Southbelt Industrial Dr.
Houston, TX 77047 USA
www.customairproducts.com
(713) 460-9009
THIS DRAWING AND THE INFORMATION HEREIN CONTAINED ARE THE PROPERTY OF CUSTOM AIR PRODUCTS, WHICH HAS FURNISHED THEM IN CONFIDENCE UPON THE UNDERSTANDING AND CONDITION THAT ALL PERSONS, FIRMS OR CORPORATIONS RECEIVING SUCH DRAWINGS AND INFORMATION SHALL BY THE ACT OF RECEIVING THEM BE DEEMED TO HAVE AGREED: TO MAKE NO COPY, DUPLICATION, DISCLOSURE OR USE WHATSOEVER OF ALL OR ANY PART THEREOF EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY CUSTOM AIR PRODUCTS: NOT TO GIVE, LEND OR OTHERWISE DISPOSE OF THIS DRAWING: AND TO RETURN THIS DRAWING PROMPTLY UPON REQUEST