THIS ARE SOME COMMAND LINE ENTRIES

Q ADEG (DRAFT) GIVES THE C/VIEW ANGLE (ie 90 DEG)Q ANGLE (HVAC) GIVES THE CE ANGLEQ ATEX(DRAFT) GIVES THE SLAB/GLAB TEXT ATTRIBUTES Q ATT GIVES THE CE ATTRIBUTESQ BANG GIVES THE CE BETA ANGLEQ BORE (PIPING) GIVES THE PIPE INSIDE DIA.Q BSRF (DRAFT) GIVES THE ATTACHEDDRG/SHT (DRWG LVL) Q BTEX(DRAFT) GIVES THE DEAD TEXT ATTRIBUTES Q CHEI (DRAFT) GIVES THE TEXT CHARACTER HEIGHT Q COL ACT GIVES THE CURRENT ACTIVE COLOUR Q COL AIDS GIVES THE CURRENT AID LINE COLOUR Q COL CE GIVES THE CURRENT ATTRIBUTED COLOUR Q COL VIS GIVES THE CURRENT VISIBLE COLOUR Q COL 4 (ETC) GIVES THE ATTRIBUTED COLOUR (YELLOW)Q CREF GIVES THE CONNECTION REFERENCEQ CUTL GIVES THE CE CUT LENGTHQ DDNAME(DRAFT) GIVES THE DIMENSION OWNERS NAME Q DER LEN GIVES THE CE EXACT LENGTHQ DER ORI GIVES ORIENTATION OF ‘CE’Q DESC GIVES THE CE DESCRIPTIONQ DESP GIVES THE CE DESPERAMETERSQ DIR (DRAFT) GIVES THE C/VIEW DIRECTION( IE N )Q DISPLAY GIVES THE TOLERENCE & REPRES LEVELSQ DMTXT(DRAFT) GIVES THE DIM TEXT ATTRIBUTESQ DNST GIVES THE CE DENSITY Q DPOS (DRAFT) GIVES THE LDIM POSITION ON SHEETQ DRNE GIVES THE END CUT-PLANE DIRECTIONQ DRNS GIVES THE START CUT-PLANE DIRECTIONQ DTER (DRAFT) GIVES THE LAYER/LDIM TERM’TR DEFAULT

Q TYPE GIVES THE FRMW STYLE TYPE(ie STLS)Q E GIVES THE CE EAST CO-ORDINATEQ ELEM GIVES THE CE ELEMENT NAMEQ FRAD GIVES THE PLOO/PAVE RADIUS ie 100mmGIVES THE NXTR/VERT RADIUS ie 100mmQ FPT (DRAFT) GIVES THE STRA FROM POINT CO-ORDS. Q FUNC GIVES THE CE FUNCTIONQ GCOF GIVES THE CE GROSS C OF GQ GTYP GIVES THE GENERIC TYPE ie OD,HP,TGQ GWEI GIVES THE CE GROSS WEIGHT Q HEI GIVES THE CE (PLOO LVL) PLT THKQ HH (PIPE SUPPT) GIVES THE CE HANGER HEAD CO-ORDSQ HPOS (PIPING) GIVES THE CE PIPE HEAD CO-ORDINATESQ HT (PIPE SUPPT) GIVES THE CE HANGER TAIL CO-ORDSQ IDP @ WRT/* GIVES THE CE P POINT CO-ORDINATESQ IDPL@ GIVES THE PLINE NAME USING CURSOR Q INREF GIVES THE CE INREFERENCEQ ISPEC (PIPING) GIVES THE CE (PIPE) INSULATIONQ JLIN GIVES THE CE JOINT LINEQ JUSL GIVES THE CE JUSTIFICATION LINE Q LEN (DRAFT) GIVES THE STRA LENGTH Q LEV GIVES THE CE LEVEL (OBSTRUCTION ETC)Q LHEI (DRAFT) GIVES THE TEXT LETTER HEIGHTQ LIST GIVES THE CE FITTINGS (NEG EXTR. ETC.)Q LOCK GIVES THE LOCK STATUSQ LSHAPE (DRAFT) GIVES THE LABEL LEADER LINE STATUSQ MATREF GIVES THE CE MATERIAL REFQ MDB GIVES THE PROJECT DATABASEQ MEM GIVES THE CE MEMBERS

Q MEML GIVES THE CE MEMBER LINEQ MIDP GIVES THE CE MIDPOINT CO-ORDINATESQ MPT (DRAFT) GIVES THE STRA MID POINT CO-ORDS Q MTO GIVES THE CE MTO STATUS Q NAM GIVES THE CE NAMEQ NCOF GIVES THE CE NET C OF GQ NSRF GIVES THE CE NET SURFACEQ NVOL GIVES THE CE NET VOLUME Q NWEI GIVES THE CE NET WEIGHTQ OBS GIVES THE CE OBSTRUCTION LEVEL Q ORI GIVES THE CE ORIENTATION (SLOPE)Q OWN GIVES THE CE OWNERQ PA (PIPING) GIVES THE CE ARRIVE CO-ORDINATES Q PARA GIVES THE CE PARAMETERS ie SERIAL SIZESQ PH (PIPING) GIVES THE CE PIPE HEAD ATTRIBUTES Q PH BORE (PIPING) GIVES THE CE (PIPE HEAD) BOREQ PH OD (PIPING) GIVES THE CE (PIPE HEAD) DIAMETERQ PT OD (PIPING) GIVES THE CE (PIPE TAIL) DIAMETER Q PI WRT/* (PIPING) GIVES THE CE (PIPE SUPPT) LOCATIONQ PKEY (DRAFT) GIVES THE DIM PLINE STATUS (ie TCTF)Q PL WRT/* (PIPING) GIVES THE CE HVAC LEAVE CO-ORDINATESQ PLTXT(DRAFT) GIVES THE PROJ TEXT ATTRIBUTESQ POS GIVES THE CE CO-ORDINATES (START / ORIGIN)Q POS IN $V1 GIVES THE CE DISTANCE TO VAR. $V1Q POSE GIVES THE CE END CO-ORDINATESQ POS FITT GIVES THE C/FITT CO-ORDINATES (START)Q POS PLRF (DRAFT) GIVES THE CURRENT VSEC CO-ORDS. Q POS IDPL@ GIVES THE PLINE CO-ORD AT CE START Q POS PPLI BOS WRT/* GIVES THE BOS PLINE CO-ORDINATESQ POS PPLI NA PROP 0.5 GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT(0.5 x DER LEN) ON THE N/AQ POSS GIVES THE CE START CO-ORDINATESQ POSS POSE GIVES THE CE BOTH END CO-ORDINATESQ POS WRT/* GIVES ORIGIN OF CE WITH REGARD TO WORLDQ PT (PIPING) GIVES THE CE PIPE TAIL ATTRIBUTES Q RAD (HVAC) GIVES THE CE RADIUSQ REF GIVES THE CE PDMS REFERENCE NO.Q REPRES GIVES THE CE REPRESENTATION STATUSQ FUNC GIVES THE CE FUNCTION Q RRSF (DRAFT) GIVES THE CURRENT VIEW RULE SETTINGSQ SIZE (DRAFT) GIVES THE VIEW O/ALL DIMENSIONS

Q SJUS GIVES THE PLOO JUSTIFICATION ie UTOPDCENDBOTQ SNAP (DRAFT) GIVES THE SNAP SETTING (ON/OFF) Q SPRE GIVES THE CE SPECIFICATION REFERENCEQ TCTL OR (Q CUTL) GIVES THE CE CUT LENGTH?Q THPOS (DRAFT) GIVES THE C/VIEW MATCHLINE CO-ORDSQ TMRF (DRAFT) GIVES THE CE (SYMBOL) NAMEQ TPOS (PIPING) GIVES THE CE PIPE TAIL CO-ORDS.Q TPT (DRAFT) GIVES THE STRA TAIL POINT CO-ORDS. Q TYPE GIVES THE CE TYPE ie SCTN ,PANEQ USER GIVES THE CE USER DATABASEQ VOL CE GIVES THE CE VOLUMEQ VLIMITS (DRAFT) GIVES THE VIEW LIMITS

Q VSCALE (DRAFT) GIVES THE C/VIEW SCALE ( ie 0.5 )

0.5 = 1:20.2 = 1:50.1 = 1:100.05 = 1:200.04 = 1:250.02 = 1:500.01 = 1:100

Q VTYP (DRAFT) GIVES THE VIEW ATT(ie.GLOBAL HIDDEN) Q XYPOS (DRAFT) GIVES THE VIEW POSITION ON SHEETQ ZDIS GIVES THE CE FITTING DIST FROM START

PDMS TYPED COMMANDS

ADD CE ADDS CEADD CREF ADDS CE PIPE CONNECTION REFADD CE COL 39 ADDS CE WITH COL 39(SEE COLOUR SHEET)ADD ALL WITHIN VOL CE ADDS ALL DISCIPLINES THAT OVERLAP CEADD ALL WITHIN VOL CE 100 ADDS ALL DISCIPLINES THAT OVERLAP CE WITH A VOLUME OF 100mm ALL ROUNDADD ALL SCTN WITHIN VOL CE ADDS ALL SECTIONS THAT OVERLAP CEADD ALL EQUIP WITHIN VOL CE ADDS ALL EQUIPMENT THAT OVERLAPS CEADD SITE ADDS CE SITEAID CLEAR LINE ALL REMOVES UNWANTED LINES FROM PDMSAT @ MOVES CE TO NEW CURSOR POSAT IDP@ MOVES CE TO SELECTED PPOINTAT IDPL@ MOVES CE TO SELECTED PLINEAXES AT CE PLACES CE AXESAXES OFF REMOVES CE AXESBY D100 (PDMS ONLY) MOVES CE DOWN 100 mmBY E100 (PDMS ONLY) MOVES CE EAST 100 mmBY N100 (PDMS ONLY) MOVES CE NORTH 100 mmBY U100 (PDMS ONLY) MOVES CE UP 100 mm

BY X100 (DRAFT & PDMS) MOVES CE X (EAST) 100 mmBY X100 WRT/*(PDMS PLATES) MOVES CE X (EAST) 100 mm WRT TO WORLDCHE CE GIVES CONSISTANCY CHECK ON CE COL ACT BLUE CHANGES THE ACTIVE COLOUR TO BLUECOL CE VIOLET CHANGES THE CE COLOUR TO VIOLET COL 39 YELLOW CHANGES LINE COL TO YELLOWDELETE CE DELETES THE CE EXT END TO IDPL@STA EXTENDS THE END TO A SELECTED PLINE EXT END -1000 EXTENDS THE END –1000FINISH ENDS & SAVES PDMS SESSIONFLIP CE FLIPS CE

GETWORK GETS LATEST MODELINCL CIRC 1 OF NOTE/TABLE REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATIONINCL ID@ GIVES THE CE CO-ORDINATES (START)OR ITEM TO BE TRANSFERED INCL NAME………………… REPOSITIONS CE TO A SELECTED DESTINATIONLOCK ALL LOCKS CE & CE MEMBERSMAR CE MARKS CE NAMENAME /TEMPORARY RENAMES SAID ITEM TO TEMPORARY

NEW FITT COPY PREV BY ZDIST PROP 1 BANG 180 COPIES FITT AT END POITION OF CE AT ABANGLE OF 180PROP 0 START POSITION CEPROP 0.5 MIDDLE POSITION CEPROP 1 END POSITION CE

NEW GLAB COPY $V1 COPIES GLAB AS VARIABLE $V1NEW GLAB COPY PREV AT @ COPIES GLAB TO PICKED LOCATIONNEW SCTN COPY PREV BY E200 (PDMS) COPIES CE E200NEW SCTN COPY PREV BY E200 COL 4(PDMS) COPIES CE E200 COL 4NEW PANE COPY PREV BY E200 COL 4(PDMS) COPIES CE E200 COL 4NEW TEXP COPY PREV BY Y10 (DRAFT) COPIES CE Y10NEW SYMB COPY PREV BY X-10 (DRAFT) COPIES CE X-10NEW VRTX COPY PREV BY X10 (DRAFT) COPIES CE X10 (CLOUDS)PKEY LTOC CHANGES DIM FROM EXIST JUSL TO LTOCREFRESH REFRESHES THE SCREENREM CE REMOVES THE CE RENAME /XXX /YYY RENAMES CE TO YYY REPRES DARC 1 SETS ARC TOLERENCE TO 1mm REPRES DARC DEF SETS ARC TOLERENCE TO 10mm (DEFAULT) REPRES HOLES ON ADDS HOLES REPRESENTATION (Apply ‘Add’ in Drawlist)REPRES OBSTRUCTION OFF REMOVES OBSTRUCTION REPRESENTATIONREPRES HOLES OFF REMOVES HOLE REPRESENTATION (Apply ‘Add’ in Drawlist)REPRES PNODE COL YELLOW PRIMARY NODES SHOWN YELLOW REPRES PNODE ON PRIMARY NODES SHOWN ONLY REPRES PNODE SIZE 6 CHANGES PRIMARY NODES TO 6mmREPRES PROF ON CL OFF SETS PROFILE REPR AS SOLID REPRES SNODE OFF SECONDARY NODES OFF ROT THRO POSE ABO D BY 30 ROTATES CE ABOUT END POS BY 30 DEG ROT THRO POSS ABO D BY 45 ROTATES CE ABOUT START POS BY 45 DEG ROT THRO MIDP ABO D BY 90 ROTATES CE ABOUT MIDP POS BY 90 DEG ROT ABO IDP@ BY 90 ROTATES CE LOCAL TO PPOINT BY 90 DEG.ROT ABO IDPL@ BY 90 ROTATES CE LOCAL TO PLINE BY 90 DEG.ROT THR IDP@ BY 90 ROTATES CE ABOUT ANY PPOINT BY 90 DEG.ROT THR IDPL@ BY 90 ROTATES CE ABOUT ANY PLINE BY 90 DEG.ROT ABO P1 BY 90 ROTATES CE ABOUT P1 BY 90 DEG.SAM LETS YOU TOGGLE BETWEEN LAST 2 ITEMSSAVEWORK SAVES LATEST WORKUNCLAIM ALL UNLOCKS ALL CLAIMED MEMBERS UNLOCK ALL UNLOCKS CE & CE MEMBERSUNM CE UNMARKS CE NAMEPREC 4 DP GIVES PRECISE READOUT TO 4 DEC. POINTSZDIST (ZDIST + 100) MOVES ITEM 100 FROM ORIG POSITION

DRAFT QUERY COMMANDS

Note: most of the query commands used in PDMS DESIGN also work in DRAFT

Q ADEG GIVES THE C/VIEW ANGLE ( ie 90 DEG )Q APOF GIVES THE CE (NOTE) TERMINATOR POS’NQ BSRF GIVES THE DRG. SHT. REF. (STRU LVL) Q CHEIGHT GIVES THE TEXT CHARACTER HEIGHT

Q CPOF GIVES THE CE (NOTE) LEADER LINE POS’N Q DIR GIVES THE C/VIEW DIRECTION( ie N )Q DPOS GIVES THE LDIM POSITION ON SHEETQ DTOF GIVES DIMENSION TEXT X and Y valueQ DTER GIVES THE LAYER/LDIM TERM’TR DEFAULT Q FPT GIVES THE STRA FROM POINT CO-ORDS Q JUST GIVES THE C/VIEW JUSTIFICATION( ie LEFT )Q LEN GIVES THE STRA LENGTH Q LHEI GIVES THE TEXT LETTER HEIGHT Q LSHAPE GIVES THE LABEL LEADER LINE STATUS Q LVIS GIVES THE CE VISIBILITYQ MPT GIVES THE STRA MID POINT CO-ORDS Q PKEY GIVES THE DIM PLINE STATUS (ie TCTF)Q PLCL GIVES THE DIM PROJECTION LINE CLEARANCEQ POS PLRF GIVES THE CURRENT VSEC CO-ORDS Q RRSF GIVES THE CURRENT VIEW RULE SETTINGS Q SIZE GIVES THE VIEW O/ALL DIMENSIONSQ SNAP GIVES THE SNAP SETTINGS (ON/OFF) Q THPOS GIVES THE C/VIEW MATCHLINE CO-ORDSQ TMRF GIVES THE CE (SYMBOL) NAMEQ TPEN GIVES THE TEXP COLOUR ATTRIBUTES Q TPT GIVES THE STRA TAIL POINT CO-ORDS Q VLIMITS GIVES THE VIEW LIMITS Q VRAT GIVES SCALE RATIO (ie 1 TO 25)Q VSCALE GIVES THE C/VIEW SCALE ( ie 0.5 )

0.5 = 1:20.2 = 1:50.1 = 1:100.05 = 1:200.04 = 1:250.02 = 1:500.01 = 1:100

Q VTYP (DRAFT) GIVES THE VIEW ATT(ie.GLOBAL HIDDEN)Q XYPOS (DRAFT) GIVES THE VIEW POSITION ON SHEET

DRAFT TYPED COMMANDS

ADEG 0 MODIFIES TEXT HORIZONTALADEG 45 MODIFIES TEXT/PRIMITIVES AT 45 DEG.ADEG 90 MODIFIES TEXT VERTICALAPOFFSET 5 -5 RE-POSITIONS LTER END X5 Y-5AT @ MOVES CE TO NEW CURSOR POSAT IDP@ MOVES CE TO SELECTED PPOINTAT IDPL@ MOVES CE TO SELECTED PLINEBLNK FALSE TEXT REMOVES BLANKED AREA BELOWBLNK TRUE TEXT BLANKS ALL IT OVERLAYSBTEXT’A-A’ MODIFIES TEXT TO A-ABY @ MOVES CE BY LOCT. FROM POS TO NEW POSBY X100 MOVES CE X (EAST) 100 mmBY Y100 MOVES CE X (NORTH) 100 mm CPOFFSET 5 -5 RE-POSITIONS LEADER LINE START X5 Y-5DIM TEX’#100 TYP’ DIMENSION TEXT READS 100 TYPDPOS @ PLACES THE LDIM POSITION BY CURSOR DTAN DEF DIMENSION TEXT DEFAULTDTAN PAR DIMENSION TEXT PARALLELDTAN HOR DIMENSION TEXT HORIZONTALDTAN STAN DIMENSION TEXT STANDARDDTAN VERTICAL DIMENSION TEXT VERTICAL

DTOF @ DIMENSION TEXT BY CURSORDTOF 0 4 DIMENSION TEXT OFFSET X0 Y4DTAN PAR DTOF 8 0 DIM TEXT PAR. & OFF X-8 Y0NLPN OFF TURNS LINE OFF (IE CLOUD VERTEX)FPT @ MOVES STRA FROM POINT BY CURSORFPT BY X2 Y-2 MOVES STRA FROM POINT BY TYPED INPUTFRAME ON TEXT FRAME ONGAP @ LETS CURSOR DETERMINE DIMENSION GAP GAP DELETE ALL DELETES ALL DIMESION GAPS GAP DELETE AT DELETES DIMENION GAP BY CURSOR GBOX 5 MODIFIES TEXT FRAME WITH 5 CLEARANCEHIGH CE HIGHLIGHTS CE INCL CIRC 1 OF NOTE/TABLE REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATIONINCL NAME………………… REPOSITIONS CE TO A SELECTED DESTINATIONLEAD STRA CHANGES LEADERLINE TO STRAIGHT LEAD BENT @ PLACES ANOTHER VERTEX ON LEADERLINE LVIS FALSE TURNS CE VISIBILITY OFFLVIS TRUE TURNS CE VISIBILITY ONLLEAD FALSE LEADERLINE OFFLLEAD TRUE LEADERLINE ONLTER OFF LINE TERMANATOR OFFLTER ARR LINE TERMANATOR ARROWLTER DOT LINE TERMANATOR DOTLTER OBL LINE TERMANATOR DASHMODIFY @ ENABLES MODS TO SLAB/GLAB GEOMETRYNEW CIRCLE DIAM 100 AT@ DRAWS CIRCLE AND POSITIONS BY CURSORNEW CIRCLE RAD 50 AT@ DRAWS CIRCLE AND POSITIONS BY CURSORNEW GLAB COPY $V1 COPIES GLAB AS VARIABLE $V1NEW GLAB COPY PREV AT @ COPIES GLAB TO PICKED LOCATIONNEW RECT XLEN40 YLEN20 ANG 45 ORIG CORNER AT@ DRAWS RECT AND POSITIONS IT BY CURSORNEW GLAB COPY PREV AT@ COPIES TEXT AND POSITIONS BY CURSORNEW ‘element’ COPY PREV BY X20 COPIES ‘element name’ WITH OFFSET BY X20NLPN OFF TURNS LINE OFF (IE CLOUD VERTEX)OSHT 10 DIM LINE OVERSHOOT 10mm OSHT @ DIM LINE OVERSHOOT BY CURSORPLCL@ POSITION LEADER LINE BY CURSORPROJ CLEAR @ SETS PROJECTION LINE POSITION BY CURSORPROJ CLEAR 5 SETS PROJECTION LINE POSITION BY 5mm PROJ TEX’TYP’ PROJECTION TEXT READS TYPPTAN PAR PROJECTION TEXT PARALLELPTAN HOR PROJECTION TEXT HORIZONTALPTAN VERTICAL PROJECTION TEXT VERTICALPTOF -8 0 PROJECTION TEXT OFFSET X-8 Y0RCOD LEFT ROTATES VIEW BOX LEFT REPEAT 5 BY X10 COPIES CE 5 TIMES BY 10mm SPACESSNAP ON/OFF TURNS SNAP ON/OFFSNAP ON 10 GIVES SNAP GRID X10 Y10 SNAP ON SPACING X10 Y20 GIVES SNAP GRID X10 Y20 TPEN 71 GIVES THE TEXP COLOUR ATTRIBUTE 71 TPT @ MOVES STRA TO POINT BY CURSORTPT BY X2 Y-2 MOVES STRA TO POINT BY TYPED INPUT UPDATE ANNO UPDATES ANNOTATION UPDATE DESIGN UPDATES DESIGNUPDATE PICTURE UPDATES GRAPHICSVGRID ON/OFF TURNS SNAP GRID VISIBILITY ON/OFF