Combined Catalog_Website... · DATANF SATANF Adapter Tube to AN Flare 9 DATPF SATPF Adapter Tube to...

3

CBC-LOK® CS-LOK®

TUBE FITTINGS

®

ASTM F1387

Canadian Registration

4

CREATION OF AN INDUSTRYIn the mid 1940’s, Cullen Crawford developed and patented the original flareless fitting (nut & doubleferrule system), making it easier and more efficient to make tubing connections. Based on this innovation, he founded the Crawford Fitting Company, creating an industry for compression fittings.

At Tylok, out mission is total customer satisfaction with both products & services. Our knowledgeable staff is readily available to answer questions and respond in a timely manner. We continue to develop new products that expand the Tylok brand. If you have a unique product need, Tylok would like to be yourengineered-solutions provider.

OPERATIONCBC-Lok® Tube Fittings are comprised of four components: Body, Front Ferrule (Collet), Rear Ferrule (Collet) & Nut. A leak-proof seal is obtained through proper ferrule action as the ferrules are tightened onto the tubing via axial thrust provided by the nut. The front ferrule provides the leak-proof seal, when the nut & ferrules are properly drawn up the specified number of turns. The rear ferrule grips the tubing preventing pull-off. The stainless steel nuts are silver plated and dry film lubricant is applied, reducing torque and ensuring proper sealing.

CS-Lok® Tube Fittings are comprised of three components: Body, Single Ferrule (Collet), & Nut. A leak-proof seal is obtained through proper ferrule action as the ferrules are tightened onto the tubing via axial thrust provided by the nut. The ferrule provides the leak-proof seal, when the nut & ferrule are properly drawn up the specified number of turns. The stainless steel nuts have molybdenum disulfide coating, reducing torque and ensuring proper sealing.

TY-COR™ PROCESSTy-Cor™ refers to the treatment that diffuses carbon into the surface of the stainless steel, thereby increasing the surface hardness without affecting the quality of the metal treated. In fact, when AISI 316 stainless steel is treated, the corrosion resistance is equal to or better than non-treated 316 stainless steel. The increase in corrosion resistance to pitting and stress corrosion is very pronounced in media that contain chlorides (e.g., sea water, bleach, HCI, etc.). The Ty-Cor™ process applied to the rear ferrule also helps eliminate galling and ensures proper sealing on the tube end make-ups.

FEATURES

CBC-Lok® Tube Fittings• Double ferrule swaging action• Total component interchangeability• Heat Code traceable• ASTM material construction

CS-Lok® Tube Fittings• Single ferrule swaging action• Total component interchangeability• Heat Code traceable• ASTM material construction

The quality system complies with the international standard ISO 9001. Tylok strives to continuously improve the effectiveness of the Quality Management System by each member within the organization.

Tylok has received the Certificate of Type Approval from the American from the American Bureau of Shipping (ABS). The following Part Families are ABS approved: DFC - Female Connector,

DMC - Male Connector, DU - Union, DELU - Elbow Union, DME - Male Elbow, and DTTT - Union Tee.

®

5

INTRODUCTIONCBC-LOK® Tube Fittings are fully interchangeable with Swagelok® & Parker A-Lok®. Although it is always recommended to use all CBC-Lok® components intermixing CBC-Lok® bodies and/or components parts with that of other manufacturers will not adversely affect sealing ability. CBC-Lok® Tube Fittings are made to strict quality control standards. CBC-Lok® Tube Fittings are proudly made in the U.S.A.

CS-Lok® Tube Fittings are fully interchangeable with Parker CPI™. Although it is always recommended to use all CS-Lok® components, intermixing CS-Lok® bodies and/or component parts with those of other manufacturers will not adversely affect sealing ability. CS-Lok® Tube Fittings are made strict quality control standards. CS-Lok® Tube Fittings are proudly made in the U.S.A.

DATANFSATANFAdapter Tubeto AN Flare

9

DATPFSATPF

Adapter Tubeto Female Pipe

10

DATPMSATPMAdapter Tubeto Male Flare

11

DBHASBHABulkheadAdapter

12

DBHFPSBHFP

Bulkhead FemalePipe Connector

13

DBHMPSBHMPBulkhead MalePipe Connector

14

DBHUSBHUBulkhead

Union

15

SBUANFDBUANF

Bulkhead toAN Flare Union

1616

SCAPDCAP

Cap

17

DMCSMC

MaleConnector

20-21

DMC-ORSSMC-ORS

O-Ring StraightThread MaleConnector

22

DMC-ORTSMC-ORT

O-Ring TaperedThread MaleConnector

23

DF PLUGSF PLUG

FittingPlug

18

DFCSFCFemale

Connector

19

Straight ThreadBoss MaleConnector

DMC-STBSMC-STB

25

Port ConnectorUnion

DPCUSPCU

26

Reducer AdapterTube to Tube

DRATTSTRATT

27

Reducing PortConnector

DRPCSRPC

28

ReducingUnion

DRUSRU

29

Tube to ButtWeld Connector

DTBWSTBW

30

DTSWSTSW

Tube to SocketWeld Connector

31

DELU45SELU45

Union 45˚Elbow

35

DUSUUnion

32

DUANFSUANF

Tube to ANFlare Union

33

DELUSELU

UnionElbow

34

DFESFEFemaleElbow

36

DMESME

MaleElbow

37

DME45SME45

Male 45˚Elbow

38

6

Table of Contents

TYLOKPRODUCTS

55

INSTALLATIONINSTRUCTIONS

56

TUBINGSELECTION

AND PREPARATION

57

SAFETYAND

QUALITY

58

TECHNICALDATA

59

MATERIALSPECIFICATIONS

60

TUBEINSERTION

CHART

61

TIBarbedInsert

48

DCRSCRUnionCross

47

DNSNNut

49

DKNSKNKnurled

Nut

50

Front Collet(Ferrule)

51

DFCRear Collet

(Ferrule)

51

DRC SCSingle Collet

(Ferrule)

51

DCSETSCSETCollet Sets

52

1MDFMud

Dauber

54

DGGGap

Gage

53

Nut Collet Sets

52

SNCSETDNCSET

62

LEAKDETECTOR

7

Table of Contents

Tube to Butt Weld Elbow

39

DTBWESTBWE

Tube to Socket Weld Elbow

40

DTSWESTSWE

Female RunTee

41

DTFTSTFT

UnionTee

45-46

DTTTSTTT

Male RunTee

42

DTMTSTMT

Female BranchTee

43

DTTFSTTF

Male BranchTee

44

DTTMSTTM

TUBE OR PIPE AN /STB DESIGNATOR HOSE OD THREAD TUBE SIZE

PIPE THREAD

(INCHES) (NPT) (INCHES)BSPP/BSPT

B Brass

SS Stainless Steel 1 1/16 1/16 - 27 1/16 - 282 1/8 1/8 - 27 5/16-24 1/8 - 28

S Steel 3 3/164 1/4 1/4 - 18 7/16-20 1/4 - 195 5/166 3/8 3/8 - 18 9/16-18 3/8 - 19

D CBC-Lok® 8 1/2 1/2 - 14 3/4-16 1/2 - 1410 5/8S CS-Lok®

12 3/4 3/4 - 14 1-1/16-12 3/4 - 1414 7/816 1 1 - 11 1/2 1-5/16-12 1 - 11

ATANF Adapter Tube to AN Flare TBWATPF Adapter Tube to Female Pipe TSWATPM Adapter Tube to Male Pipe UBHA Bulkhead Adapter UANFBHFP Bulkhead Female Pipe Connector ELUBHMP Bulkhead Male Pipe Connector ELU45BHU Bulkhead Union FE

BUANF Bulkhead to AN Flare Union ME45CAP Cap ME

F PLUG Fitting Plug TBWEFC Female Connector TSWEMC Male Connector TFT

MC-ORS O Ring Straight Thread Male Connector TMTMC-ORT O Ring Pipe Thread Male Connector TTFMC-STB

PCURATTRPCDRU

Straight Thread Boss Male Connector TTMPort Connector Union TTT

Reducer Adapter Tube to Tube CRReducing Port Connector N

Reducing Union KN

Tube to Butt Weld ConnectorTube to Socket Weld Connector

UnionTube to AN Flare Union

Union ElbowUnion 45º Elbow

Female ElbowMale 45º Elbow

Male ElbowTube to Butt Weld Elbow

Tube to Socket Weld ElbowFemale Run TeeMale Run Tee

Female Branch TeeMale Branch Tee

Union TeeUnion Cross

NutKnurled Nut

CHART 2 - TUBE O.D./THREAD SIZES

CHART 1 - MATERIAL

CHART 3 - STYLE

CHART 4 - DESCRIPTION CHART 4 - DESCRIPTION

8

How to OrderCBC/CS-Lok®

CBC-Lok®/CS-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number. CBC-Lok®/CS-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration, and thread connection. The part number describes a complete fitting assembly.

The size nomenclature to describe a tee fitting is from left (1) to right (2) and down (3).

Special Configurations available upon request.

Example: A Stainless Steel Female Run Tee, 3/8” Tube Size to 1/4” Female Pipe to 3/8” Tube is designated as follows:

SS - D TFT 4

Material Tube O.D. Odd End Size

Chart 1 Chart 2 Chart 3 Chart 4 Chart 23

6 - -

Style escriptionD

- 1 2

CBCPART

NUMBERINTERCHANGES

WITH

4-DATANF-46-DATANF-46-DATANF-68-DATANF-8

12-DATANF-1216-DATANF-16

4-TA-1-4AN6-TA-1-4AN6-TA-1-6AN8-TA-1-8AN

12-TA-1-12AN16-TA-1-16AN

CSPART

NUMBERINTERCHANGES

WITH

------

------

TTUBEO.D.

1/43/83/81/23/4

1

THREAD

7/16-20 UNJF7/16-20 UNJF9/16-18 UNJF3/4-16 UNJF1-1/16-12 UNJ1-5/16-12 UNJ

A

1.491.671.672.082.332.74

ETHRUHOLE

0.170.170.270.380.580.80

BHBODYHEX

1/21/25/8

13/161 1/81 3/8

A

E T

BH

37

THREAD

NOTE: Dimensions subject to change, to be used for reference only.

9

DATANFAdapter Tube to AN Flare

CBCPART

NUMBERINTERCHANGES

WITH

2-DATPF-22-DATPF-44-DATPF-24-DATPF-44-DATPF-64-DATPF-86-DATPF-26-DATPF-46-DATPF-66-DATPF-88-DATPF-48-DATPF-68-DATPF-88-DATPF-1210-DATPF-812-DATPF-812-DATPF-1216-DATPF-1216-DATPF-16

CSPART

NUMBERINTERCHANGES

WITHT

TUBEO.D.

1/81/81/41/41/41/43/83/83/83/81/21/21/21/25/83/43/4

11

A

1.371.521.391.551.641.891.531.691.771.981.892.032.272.272.242.242.302.612.66

ETHRUHOLE

0.080.080.170.170.170.170.270.270.270.270.380.380.380.380.470.580.580.800.80

BHBODYHEX

9/163/49/163/47/8

1 1/169/163/47/8

1 1/163/47/8

1 1/161 5/161 1/161 1/161 5/161 5/161 5/8

PPIPE END

NPT

2FA2N 2FA4N4FA2N4FA4N4FA6N4FA8N6FA2N6FA4N6FA6N6FA8N8FA4N8FA6N8FA8N

-10FA8N12FA8N12FA12N16FA12N16FA16N

2-TA-7-22-TA-7-44-TA-7-24-TA-7-44-TA-7-64-TA-7-86-TA-7-26-TA-7-46-TA-7-66-TA-7-88-TA-7-48-TA-7-68-TA-7-88-TA-7-1210-TA-7-812-TA-7-812-TA-7-1216-TA-7-1216-TA-7-16

2-SATPF-22-SATPF-44-SATPF-24-SATPF-44-SATPF-64-SATPF-86-SATPF-26-SATPF-46-SATPF-66-SATPF-88-SATPF-48-SATPF-68-SATPF-88-SATPF-1210-SATPF-812-SATPF-812-SATPF-1216-SATPF-1216-SATPF-16

2-2 T2HG2-4 T2HG4-2 T2HG4-4 T2HG4-6 T2HG4-8 T2HG6-2 T2HG6-4 T2HG6-6 T2HG6-8 T2HG8-4 T2HG8-6 T2HG8-8 T2HG

-10-8 T2HG12-8 T2HG12-12 T2HG16-12 T2HG16-16 T2HG

1/81/41/81/43/81/21/81/43/81/21/43/81/23/41/21/23/43/4

1

A

T E

BH

P


10

DATPF/SATPFAdapter Tube to Female Pipe

TTUBEO.D.

1/81/81/41/41/41/45/163/83/83/83/81/21/21/21/25/85/83/43/43/47/8

11

A

1.291.511.331.551.581.801.611.481.691.701.921.921.952.172.171.992.212.212.212.522.212.522.83

ETHRUHOLE

0.090.090.170.170.170.170.250.190.270.270.270.280.380.380.380.380.470.470.580.590.470.630.80

BHBODYHEX

7/169/167/169/1611/167/89/167/169/1611/167/89/1611/167/8

1 1/1611/167/87/8

1 1/161 3/815/161 1/161 3/8

PPIPE END

NPT

CBCPART

NUMBERINTERCHANGES

WITH

2-DATPM-22-DATPM-44-DATPM-24-DATPM-44-DATPM-64-DATPM-85-DATPM-46-DATPM-26-DATPM-46-DATPM-66-DATPM-88-DATPM-48-DATPM-68-DATPM-88-DATPM-1210-DATPM-610-DATPM-812-DATPM-812-DATPM-1212-DATPM-1614-DATPM-816-DATPM-1216-DATPM-16

CSPART

NUMBERINTERCHANGES

WITH

2MA2N2MA4N4MA2N4MA4N4MA6N4MA8N5MA4N6MA2N6MA4N6MA6N6MA8N8MA4N8MA6N8MA8N

--

10MA8N12MA8N12MA12N12MA16N

-16MA12N16MA16N

2-TA-1-22-TA-1-44-TA-1-24-TA-1-44-TA-1-64-TA-1-85-TA-1-46-TA-1-26-TA-1-46-TA-1-66-TA-1-88-TA-1-48-TA-1-68-TA-1-88-TA-1-12

-10-TA-1-812-TA-1-812-TA-1-1212-TA-1-16

-16-TA-1-1216-TA-1-16

2-SATPM-22-SATPM-44-SATPM-24-SATPM-44-SATPM-64-SATPM-85-SATPM-46-SATPM-26-SATPM-46-SATPM-66-SATPM-88-SATPM-48-SATPM-68-SATPM-88-SATPM-1210-SATPM-610-SATPM-812-SATPM-812-SATPM-1212-SATPM-1614-SATPM-816-SATPM-1216-SATPM-16

2-2 T2HF2-4 T2HF4-2 T2HF4-4 T2HF4-6 T2HF4-8 T2HF5-4 T2HF6-2 T2HF6-4 T2HF6-6 T2HF6-8 T2HF8-4 T2HF8-6 T2HF8-8 T2HF8-12 T2HF

-10-8 T2HF12-8 T2HF12-12 T2HF12-16 T2HF

-16-12 T2HF16-16 T2HF

1/81/41/81/43/81/21/41/81/41/81/21/43/81/23/43/81/21/23/4

11/23/4

1

E T

A

BH

P

11

DATPM/SATPMAdapter Tube to Male Pipe


TTUBEO.D.

1/43/81/2

A

2.272.563.04

ETHRUHOLE

0.170.270.90

BHBODYHEX

5/83/4

15/16

CBCPART

NUMBERINTERCHANGES

WITH

4-DBHA-46-DBHA-68-DBHA-8

CSPART

NUMBERINTERCHANGES

WITH

4TUBC46TUBC68TUBC8

400-R1-4600-R1-6810-R1-8

4-SBHA-46-SBHA-68-SBHA-8

4-4 T2H2BZ6-6 T2H2BZ8-8 T2H2BZ

1/43/81/2

T1TUBEO.D.

B

0.610.670.90

JNHJAM NUTHEX

5/83/4

15/16

NHNUTHEX

9/1611/167/8

PANELHOLE

29/6437/6449/64

T1 E

A

B

T

BHJNH

NH

DBHA/SBHABulkhead Adapter

12


TTUBEO.D.

1/81/41/45/163/83/81/21/25/8

1

A

1.771.852.041.962.172.232.432.622.653.68

ETHRUHOLE

0.090.190.190.250.280.280.410.410.500.88

BHBODYHEX

9/165/83/4

11/163/47/8

15/161 1/161 1/161 5/8

CBCPART

NUMBERINTERCHANGES

WITH

2-DBHFP-24-DBHFP-24-DBHFP-45-DBHFP-26-DBHFP-46-DBHFP-68-DBHFP-68-DBHFP-810-DBHFP-816-DBHFP-16

CSPART

NUMBERINTERCHANGES

WITH

2FBC2N4FBC2N4FBC4N5FBC2N6FBC4N

-8FBC6N8FBC8N10FBC8N16FBC16N

200-71-2400-71-2400-71-4

-600-71-4600-71-6810-71-6810-71-8

-1610-71-16

2-SBHFP-24-SBHFP-24-SBHFP-45-SBHFP-26-SBHFP-46-SBHFP-68-SBHFP-68-SBHFP-810-SBHFP-816-SBHFP-16

1/81/81/41/81/43/83/81/21/21

P PIPEENDNPT B

0.520.610.610.650.670.670.900.900.961.24

JNHJAM NUTHEX

1/25/85/8

11/163/43/4

15/1615/161 1/161 5/8

NHNUTHEX

7/169/169/165/8

11/1611/167/87/8

11 1/2

PANELHOLE

21/6429/6429/6433/6437/6437/6449/6449/6457/641 21/64

2-2 GH2BZ4-2 GH2BZ4-4 GH2BZ5-2 GH2BZ6-4 GH2BZ

-8-6 GH2BZ8-8 GH2BZ10-8 GH2BZ16-16 GH2BZ

E

A

T

B JNHBH

NH

P

13

DBHFP/SBHFPBulkhead Female Pipe Connector


TTUBEO.D.

1/81/41/41/43/83/83/81/21/21/23/4

A

1.831.952.132.172.262.262.512.492.492.713.26

ETHRUHOLE

0.090.190.190.190.280.280.280.280.380.410.63

BHBODYHEX

1/25/85/8

11/163/43/47/8

15/1615/1615/161 3/8

CBCPART

NUMBERINTERCHANGES

WITH

2-DBHMP-24-DBHMP-24-DBHMP-44-DBHMP-66-DBHMP-46-DBHMP-66-DBHMP-88-DBHMP-48-DBHMP-68-DBHMP-8

12-DBHMP-16

CSPART

NUMBERINTERCHANGES

WITH

2MBC2N4MBC2N4MBC4N4MBC6N6MBC4N6MBC6N6MBC8N8MBC4N8MBC6N8MBC8N

200-11-2400-11-2400-11-4

-600-11-4600-11-6600-11-8810-11-4810-11-6810-11-8

2-SBHMP-24-SBHMP-24-SBHMP-44-SBHMP-66-SBHMP-46-SBHMP-66-SBHMP-88-SBHMP-48-SBHMP-68-SBHMP-8

12-SBHMP-12

1/81/81/43/81/43/81/21/43/81/21

P PIPEENDNPT

B

0.520.610.610.610.670.670.670.900.900.900.63

JNHJAM NUTHEX

1/25/85/85/83/43/43/4

15/1615/1615/161 3/16

NHNUTHEX

7/169/169/169/1611/1611/1611/167/87/87/8

1 1/8

PANELHOLE

21/6429/6429/6429/6437/6437/6437/6449/6449/6449/641 1/64

2-2 FH2BZ4-2 FH2BZ4-4 FH2BZ4-6 FH2BZ6-4 FH2BZ6-6 FH2BZ6-8 FH2BZ8-4 FH2BZ8-6 FH2BZ8-8 FH2BZ

E

A

T

B

JNH

NH

BHP

14

DBHMP/SBHMPBulkhead Male Pipe Connector


TTUBEO.D.

1/161/83/161/45/163/81/25/83/4

1

A

1.252.032.112.272.422.462.802.863.113.80

ETHRUHOLE

0.050.090.130.190.250.280.410.500.630.88

BHBODYHEX

5/161/29/165/8

11/163/4

15/161 1/161 3/161 5/8

B

0.340.520.540.610.650.670.900.960.961.24

JNHJAM NUTHEX

5/161/29/165/8

11/163/4

15/161 1/161 3/161 5/8

NHNUTHEX

5/167/161/29/165/8

11/167/8

11 1/81 1/2

PANELHOLE

13/6421/6425/6429/6433/6437/6449/6457/641 1/641 21/64

CBCPART

NUMBERINTERCHANGES

WITH

1-DBHU-12-DBHU-23-DBHU-34-DBHU-45-DBHU-56-DBHU-68-DBHU-8

10-DBHU-1012-DBHU-1216-DBHU-16

CSPART

NUMBERINTERCHANGES

WITH

1BC12BC23BC34BC45BC56BC68BC8

10BC1012BC1216BC16

100-61200-61300-61400-61500-61600-61810-611010-611210-611610-61

1-SBHU-12-SBHU-23-SBHU-34-SBHU-45-SBHU-56-SBHU-68-SBHU-8

10-SBHU-1012-SBHU-1216-SBHU-16

1-1 WBZ2-2 WBZ3-3 WBZ4-4 WBZ5-5 WBZ6-6 WBZ8-8 WBZ

10-10 WBZ12-12 WBZ16-16 WBZ

E

A

T

B

JNHBH

NH

15

DBHU/SBHUBulkhead Union


TTUBEO.D.

1/43/81/23/4

1

A

2.122.262.593.123.65

ETHRUHOLE

0.170.280.390.610.85

BHBODYHEX

5/83/4

15/161 3/161 5/8

7/16-209/16-183/4-16

1-1/16-121-5/6-12

THREAD B

0.610.670.900.961.24

JNHJAM NUTHEX

5/83/4

15/161 3/161 5/8

NHNUTHEX

9/1611/167/8

1 1/81 1/2

PANELHOLE

29/6437/6449/641 1/641 21/64

CSPART

NUMBERINTERCHANGES

WITH

4-4 XH2BZ6-6 XH2BZ8-8 XH2BZ

12-12 XH2BZ16-16 XH2BZ

4-SBUANF-46-SBUANF-68-SBUANF-8

12-SBUANF-1216-SBUANF-16

CBCPART

NUMBERINTERCHANGES

WITH

4-DBUANF-46-DBUANF-68-DBUANF-8

12-DBUANF-1216-DBUANF-16

4XABC46XABC68XABC8

12XABC1216XABC16

400-61-4AN600-61-6AN810-61-8AN

1210-61-12AN1610-61-16AN

E

A

T

B

JNH

BH

NH

THREAD

37

16

DBUANF/SBUANFBulkhead to AN Flare Union


TTUBEO.D.

1/161/83/161/45/163/81/25/83/47/8

1

A

0.590.800.840.920.981.011.151.181.241.331.52

BHBODYHEX

5/167/167/161/29/165/8

13/1615/161 1/161 3/161 3/8

CBCPART

NUMBERINTERCHANGES

WITH

1-DCAP2-DCAP3-DCAP4-DCAP5-DCAP6-DCAP8-DCAP10-DCAP12-DCAP14-DCAP16-DCAP

CSPART

NUMBERINTERCHANGES

WITH

1BLEN12BLEN23BLEN34BLEN45BLEN56BLEN68BLEN8

10BLEN1012BLEN1214BLEN1416BLEN16

100-C200-C300-C400-C500-C600-C810-C1010-C1210-C1410-C1610-C

B

0.340.520.540.610.650.670.900.960.961.021.24

NHNUTHEX

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

1 PNBZ2 PNBZ3 PNBZ4 PNBZ5 PNBZ6 PNBZ8 PNBZ10 PNBZ12 PNBZ14 PNBZ16 PNBZ

1-SCAP2-SCAP3-SCAP4-SCAP5-SCAP6-SCAP8-SCAP10-SCAP12-SCAP14-SCAP16-SCAP

T

A

B

NH

BH

17

DCAP/SCAPCap


TTUBEO.D.

1/161/83/161/45/163/81/25/83/47/8

1

CBCPART

NUMBERINTERCHANGES

WITH

1-DF PLUG2-DF PLUG3-DF PLUG4-DF PLUG5-DF PLUG6-DF PLUG8-DF PLUG10-DF PLUG12-DF PLUG14-DF PLUG16-DF PLUG

CSPART

NUMBERINTERCHANGES

WITH

1BLP12BLP23BLP34BLP45BLP56BLP68BLP8

10BLP1012BLP1214BLP1416BLP16

100-P200-P300-P400-P500-P600-P810-P1010-P1210-P1410-P1610-P

NHNUTHEX

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

1 FNZ2 FNZ3 FNZ4 FNZ5 FNZ6 FNZ8 FNZ10 FNZ12 FNZ14 FNZ16 FNZ

1-SF PLUG2-SF PLUG3-SF PLUG4-SF PLUG5-SF PLUG6-SF PLUG8-SF PLUG10-SF PLUG12-SF PLUG14-SF PLUG16-SF PLUG

T

NH

18

DF PLUG/SF PLUGFitting Plug


TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITH

2-DFC-22-DFC-42-DFC-63-DFC-23-DFC-44-DFC-24-DFC-44-DFC-64-DFC-85-DFC-25-DFC-45-DFC-65-DFC-86-DFC-26-DFC-46-DFC-66-DFC-86-DFC-128-DFC-48-DFC-68-DFC-88-DFC-128-DFC-1610-DFC-410-DFC-610-DFC-810-DFC-1212-DFC-612-DFC-812-DFC-1212-DFC-1614-DFC-814-DFC-1216-DFC-616-DFC-816-DFC-1216-DFC-16

CSPART

NUMBERINTERCHANGES

WITH

2FSC2N2FSC4N

-3FSC2N

-4FSC2N4FSC4N4FSC6N4FSC8N5FSC2N5FSC4N

--

6FSC2N6FSC4N6FSC6N6FSC8N6FSC12N8FSC4N8FSC6N8FSC8N8FSC12N

--

10FSC6N10FSC8N10FSC12N

-12FSC8N12FSC12N

--

14FSC12N--

16FSC12N16FSC16N

200-7-2200-7-4

-300-7-23FSC4N400-7-2400-7-4400-7-6400-7-8500-7-2500-7-45FSC6N

-600-7-2600-7-4600-7-6600-7-8600-7-12810-7-4810-7-6810-7-8810-7-12810-7-16

-1010-7-61010-7-81010-7-121210-7-61210-7-81210-7-121210-7-16

-1410-7-12

-1610-7-81610-7-121610-7-16

P PIPEENDNPT

BNH

NUTHEX

2-2 GBZ2-4 GBZ

-3-2 GBZ3-4 GBZ4-2 GBZ4-4 GBZ4-6 GBZ4-8 GBZ5-2 GBZ5-4 GBZ5-6 GBZ

-6-2 GBZ6-4 GBZ6-6 GBZ6-8 GBZ6-12 GBZ8-4 GBZ8-6 GBZ8-8 GBZ8-12 GBZ

--

10-6 GBZ10-8 GBZ10-12 GBZ

-12-8 GBZ12-12 GBZ

--

14-12 GBZ--

16-12 GBZ16-16 GBZ

2-SFC-22-SFC-42-SFC-63-SFC-23-SFC-44-SFC-24-SFC-44-SFC-64-SFC-85-SFC-25-SFC-45-SFC-65-SFC-86-SFC-26-SFC-46-SFC-66-SFC-86-SFC-128-SFC-48-SFC-68-SFC-88-SFC-128-SFC-1610-SFC-410-SFC-610-SFC-810-SFC-1212-SFC-612-SFC-812-SFC-1212-SFC-1614-SFC-814-SFC-1216-SFC-616-SFC-816-SFC-1216-SFC-16

1/8 1/8 1/83/16 3/16 1/41/41/41/45/16 5/16 5/165/163/83/83/83/83/81/21/21/21/21/25/85/85/85/83/43/43/43/47/87/8

1111

1/81/43/81/81/41/81/43/81/21/81/43/81/21/81/43/81/23/41/43/81/23/4

11/43/81/23/43/81/23/4

11/23/43/81/23/4

1

1.14 1.33 1.39 1.16 1.35 1.23 1.42 1.48 1.67 1.27 1.46 1.52 1.71 1.29 1.48 1.54 1.73 1.89 1.59 1.65 1.84 1.90 2.27 1.80 1.65 1.83 1.90 1.67 1.84 1.90 2.28 1.83 1.96 2.15 2.15 2.12 2.46

0.520.520.520.540.540.610.610.610.610.650.650.650.650.670.670.670.670.670.900.900.900.900.900.960.960.960.960.960.960.960.961.021.021.241.241.241.24

0.09 0.09 0.09 0.13 0.13 0.190.190.190.190.250.250.250.250.280.280.280.280.280.410.410.410.410.410.440.500.500.500.560.630.630.630.700.720.560.700.880.88

7/167/167/161/21/29/169/169/169/165/85/85/85/8

11/1611/1611/1611/1611/167/87/87/87/87/8

1111

1 1/81 1/81 1/81 1/81 1/41 1/41 1/21 1/21 1/21 1/2

9/163/47/89/163/49/163/47/8

1 1/169/163/47/8

1 1/165/83/47/8

1 1/161 5/1613/167/8

1 1/161 5/161 5/815/1615/161 1/161 5/161 1/161 1/161 5/161 5/81 3/161 3/81 3/81 3/81 3/81 5/8

E

A

B

T

NH

BH

P

19

DFC/SFCFemale Connector


1-DMC-11-DMC-22-DMC-12-DMC-22-DMC-42-DMC-62-DMC-83-DMC-23-DMC-44-DMC-14-DMC-24-DMC-44-DMC-64-DMC-84-DMC-125-DMC-25-DMC-45-DMC-65-DMC-86-DMC-26-DMC-46-DMC-66-DMC-86-DMC-126-DMC-168-DMC-28-DMC-48-DMC-68-DMC-88-DMC-128-DMC-16

CBC PART

NUMBER

100-1-1100-1-2200-1-1200-1-2200-1-3200-1-6200-1-8300-1-2300-1-4400-1-1400-1-2400-1-4400-1-6400-1-8400-1-12500-1-2500-1-4500-1-6500-1-8600-1-2600-1-4600-1-6600-1-8600-1-12600-1-16810-1-2810-1-4810-1-6810-1-8810-1-12810-1-16

INTERCHANGESWITH

1MSC1N 1MSC2N 2MSC1N 2MSC2N 2MSC4N 2MSC6N 2MSC8N 3MSC2N 3MSC4N 4MSC1N 4MSC2N 4MSC4N 4MSC6N 4MSC8N 4MSC12N 5MSC2N 5MSC4N 5MSC6N 5MSC8N 6MSC2N 6MSC4N 6MSC6N 6MSC8N 6MSC12N

- 8MSC2N 8MSC4N 8MSC6N 8MSC8N 8MSC12N 8MSC16N

CSPART

NUMBER

1-SMC-11-SMC-22-SMC-12-SMC-22-SMC-42-SMC-62-SMC-83-SMC-23-SMC-44-SMC-14-SMC-24-SMC-44-SMC-64-SMC-84-SMC-125-SMC-25-SMC-45-SMC-65-SMC-86-SMC-26-SMC-46-SMC-66-SMC-86-SMC-126-SMC-168-SMC-28-SMC-48-SMC-68-SMC-88-SMC-128-SMC-16

INTERCHANGESWITH

1-1 FBZ1-2 FBZ2-1 FBZ2-2 FBZ2-4 FBZ2-6 FBZ2-8 FBZ3-2 FBZ3-4 FBZ4-1 FBZ4-2 FBZ4-4 FBZ4-6 FBZ4-8 FBZ4-12 FBZ5-2 FBZ5-4 FBZ5-6 FBZ5-8 FBZ6-2 FBZ6-4 FBZ6-6 FBZ6-8 FBZ6-12 FBZ

- 8-2 FBZ8-4 FBZ8-6 FBZ8-8 FBZ8-12 FBZ8-16 FBZ

1/161/161/81/81/81/81/83/163/161/41/41/41/41/41/45/165/165/165/163/83/83/83/83/83/81/21/21/21/21/21/2

TTUBEO.D.

1/161/81/161/81/43/81/21/81/41/161/81/43/81/23/41/81/43/81/21/81/43/81/23/4

11/81/43/81/23/4

1

P PIPEENDNPT

0.95 1.03 1.17 1.20 1.41 1.42 1.67 1.23 1.43 1.29 1.29 1.49 1.51 1.76 1.82 1.35 1.54 1.56 1.77 1.39 1.57 1.57 1.83 1.89 2.14 1.52 1.71 1.71 1.93 1.99 2.26

A

0.340.340.520.520.520.520.520.540.540.610.610.610.610.610.610.650.650.650.650.670.670.670.670.670.670.900.900.900.900.900.90

B

0.050.050.090.090.090.090.090.130.130.130.190.190.190.190.190.190.250.250.250.190.280.280.280.280.280.190.280.380.410.410.41

E THRUHOLE

5/165/167/167/167/167/167/161/21/29/169/169/169/169/169/165/85/85/85/8

11/1611/1611/1611/1611/1611/167/87/87/87/87/87/8

NHNUTHEX

5/167/167/167/169/1611/167/87/169/161/21/29/1611/167/8

1 1/169/169/1611/167/85/85/8

11/167/8

1 1/161 3/8 13/16 13/16 13/167/8

1 1/161 3/8

BHBODYHEX

E T

A

B

NH

BH P

20

DMC/SMCMale Connector


CSPART

NUMBERINTERCHANGES

WITH

10-DMC-410-DMC-610-DMC-810-DMC-1212-DMC-412-DMC-612-DMC-812-DMC-1212-DMC-1614-DMC-614-DMC-814-DMC-1214-DMC-1616-DMC-816-DMC-1216-DMC-16

CBCPART

NUMBER

1010-1-4 1010-1-6 1010-1-8 1010-1-12 1210-1-4 1210-1-6 1210-1-8 1210-1-12 1210-1-16

1410-1-8 1410-1-12 1410-1-16 1610-1-8 1610-1-12 1610-1-16

INTERCHANGESWITH

- 10MSC6N10MSC8N10MSC12N

- -

12MSC8N12MSC12N12MSC16N

- -

14MSC12N14MSC16N16MSC8N16MSC12N16MSC16N

10-SMC-410-SMC-610-SMC-810-SMC-1212-SMC-412-SMC-612-SMC-812-SMC-1212-SMC-1614-SMC-614-SMC-814-SMC-1214-SMC-1616-SMC-816-SMC-1216-SMC-16

- 10-6 FBZ10-8 FBZ10-12 FBZ

--

12-8 FBZ12-12 FBZ12-16 FBZ

--

14-12 FBZ14-16 FBZ16-8 FBZ16-12 FBZ16-16 FBZ

5/85/85/85/83/43/43/43/43/47/87/87/87/8

111

T TUBE O.D.

1/43/81/23/41/43/81/23/4

13/81/23/4

11/23/4

1

P PIPEENDNPT

1.74 1.74 1.93 1.99 1.81 1.81 1.99 1.99 2.26 1.80 1.99 1.99 2.26 2.27 2.27 2.46

A

0.960.960.960.960.960.960.960.960.961.021.021.021.021.241.241.24

B

0.28 0.38 0.47 0.50 0.28 0.38 0.47 0.63 0.63 0.38 0.47 0.63 0.72 0.47 0.63 0.88

E THRU HOLE

1111

1 1/8 1 1/81 1/8 1 1/81 1/81 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2

NH NUT HEX

15/1615/1615/161 1/161 1/161 1/161 1/161 1/161 3/81 3/161 3/161 3/161 3/81 3/81 3/81 3/8

BHBODYHEX

E T

A

B

NH

BH P

21

DMC/SMCMale Connector


TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH THREAD B

NHNUTHEX

O-RING

2-DMC-ORS4-DMC-ORS6-DMC-ORS8-DMC-ORS12-DMC-ORS16-DMC-ORS

200-1-OR2 M2SC2400-1-OR4 M2SC4600-1-OR6 M2SC6810-1-OR8 M2SC81210-1-OR 12M2SC121610-1-OR 16M2SC16

2-SMC-ORS4-SMC-ORS6-SMC-ORS8-SMC-ORS12-SMC-ORS16-SMC-ORS

2-2 ZHBA54-4 ZHBA56-6 ZHBA58-8 ZHBA5

12-12 ZHBA516-16 ZHBA5

1/81/43/81/23/4

1

5/16-247/16-209/16-183/4-16

1-1/16-121-5/16-12

1.30 1.51 1.67 1.80 2.06 2.30

0.520.610.670.900.961.24

0.090.190.280.410.630.88

7/169/1611/167/8

1 1/81 1/2

9/163/4

15/161 1/81 1/21 3/4

AS-011AS-111AS-113AS-116AS-215AS-219

E

A

T

B

NH

BH

O-RING

THREAD

22

DMC-ORS/SMC-ORSO-Ring Straight Thread Male Connector

NOTE: Dimensions subject to change, to be used for reference only. Standard O-Ring material is Buna-N, 70 durometer.

TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

PPIPE ENDNPT

BNH

NUTHEX

O-RING

4-DMC-2-ORT4-DMC-4-ORT6-DMC-6-ORT6-DMC-8-ORT8-DMC-4-ORT8-DMC-8-ORT

400-1-2-OR400-1-4-OR600-1-6-OR600-1-8-OR

- 810-1-8-OR

4M3SC24M3SC46M3SC66M3SC88M3SC48M3SC8

4-SMC-2-ORT4-SMC-4-ORT6-SMC-6-ORT6-SMC-8-ORT8-SMC-4-ORT8-SMC-8-ORT

4-2 ZHBF54-4 ZHBF56-6 ZHBF56-8 ZHBF58-4 ZHBF58-8 ZHBF5

1/41/43/83/81/21/2

1/81/43/81/21/4 1/2

1.381.511.641.861.681.96

0.61 0.61 0.67 0.67 0.90 0.90

0.190.190.280.280.280.41

9/169/16 11/1611/167/87/8

3/4 15/16 1 1/8

1 5/1615/16 1 5/16

AS-111AS-113AS-116AS-212AS-113AS-212

E T

B

A

NH

BH

O-RING

P

23

DMC-ORT/SMC-ORTO-Ring Tapered Thread Male Connector


B

D

1

A

1

C

E

18"

1

1 Allow clearance for (1) full thread.

5/16-24 - 0.50 0.59 0.66 0.09 0.165/16-24 - 0.50 0.59 0.66 0.09 0.22

- 1/8 0.69 0.78 0.88 0.16 0.283/8-24 - 0.56 0.66 0.75 0.09 0.227/16-20 - 0.69 0.78 0.88 0.16 0.28

- 1/8 0.69 0.78 0.88 0.16 0.28- 1/4 0.87 0.97 1.09 0.16 0.31

1/2-20 - 0.75 0.91 1.03 0.16 0.319/16-18 - 0.81 0.97 1.09 0.16 0.31

- 1/4 0.87 0.97 1.09 0.16 0.31- 3/8 1.00 1.16 1.31 0.16 0.34- 1/2 1.22 1.34 1.53 0.22 0.44

3/4-16 - 1.00 1.16 1.31 0.16 0.34- 1/2 1.22 1.34 1.53 0.22 0.44

1-1/16-12 - 1.41 1.53 1.75 0.22 0.501-5/16-12 - 1.69 1.78 2.03 0.22 0.56

24

MOUNTING DIMENSIONSfor ORS/ORT Fittings

RAISED SURFACEMinimum diameter is larger than the O-Ring sealing diameter to prevent O-Ring extrusion.

RECESSED HOLE(SHOULDER CLEARANCE)Minimum diameter allows clearance for round shoulder of fitting into recess.

RECESSED HOLE(HEX CLEARANCE)Minimum diameter allows clearance for hex of fitting into recess.

1.341.401.471.541.651.932.15

TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER


NHNUTHEX

O-RING

4-DMC-4-STB6-DMC-4-STB6-DMC-6-STB8-DMC-6-STB8-DMC-8-STB

12-DMC-12-STB16-DMC-16-STB

400-1-4ST600-1-4ST600-1-6ST810-1-6ST810-1-8ST

1210-1-12ST1610-1-16ST

4M1SC46M1SC46M1SC68M1SC68M1SC8

12M1SC1216M1SC16

4-SMC-4-STB6-SMC-4-STB6-SMC-6-STB8-SMC-6-STB8-SMC-8-STB

12-SMC-12-STB16-SMC-16-STB

4-4 ZHBA6-4 ZHBA6-6 ZHBA8-6 ZHBA8-8 ZHBA

12-12 ZHBA16-16 ZHBA

1/43/83/81/21/23/4

1

7/16-207/16-209/16-189/16-183/4-16

1-1/16-121-5/16-12

0.610.670.670.900.900.961.24

0.170.170.300.300.390.610.85

9/1611/1611/167/87/8

1 1/8 1 1/2

9/165/8

11/16 13/167/8

1 1/41 1/2

AS-904AS-904AS-906AS-906AS-908AS-912AS-916

E

A

T

B

NH

BH

O-RING

THREAD

25

DMC-STB/SMC-STBStraight Thread Boss Male Connector

NOTE: Dimensions subject to change, to be used for reference only. Adapts to J1926/1 and ISO 11926-1 Straight Thread Boss. Standard O-Ring material is FKM, 90 durometer.

TTUBEO.D.

AE

THRUHOLE

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

2-DPCU4-DPCU6-DPCU8-DPCU12-DPCU16-DPCU

U201-PC401-PC601-PC811-PC 1211-PC1611-PC

2PC24PC46PC68PC8

12PC1216PC16

2-SPCU4-SPCU6-SPCU8-SPCU12-SPCU16-SPCU

2-2 ZPC4-4 ZPC6-6 ZPC8-8 ZPC

12-12 ZPC16-16 ZPC

1/81/43/81/23/4

1

1.08 1.13 1.28 1.69 1.75 2.10

0.080.170.270.380.580.80

E T

A

26

DPCU/SPCUPort Connector Union


TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

T1TUBEO.D.

BNH

NUTHEX

1-DRATT-22-DRATT-12-DRATT-22-DRATT-42-DRATT-64-DRATT-24-DRATT-44-DRATT-64-DRATT-85-DRATT-66-DRATT-46-DRATT-66-DRATT-86-DRATT-106-DRATT-128-DRATT-48-DRATT-68-DRATT-88-DRATT-108-DRATT-128-DRATT-148-DRATT-1610-DRATT-1210-DRATT-1412-DRATT-812-DRATT-1614-DRATT-1616-DRATT-16

100-R-2200-R-1200-R-2200-R-4200-R-6400-R-2400-R-4400-R-6400-R-8500-R-6600-R-4600-R-6600-R-8600-R-10600-R-12810-R-4810-R-6810-R-8810-R-10810-R-12

- 810-R-161010-R-121010-R-141210-R-81210-R-16

- -

2TUR11TUR22TUR24TUR26TUR22TUR44TUR46TUR48TUR46TUR54TUR66TUR68TUR610TUR612TUR64TUR86TUR8

- 10TUR812TUR8

- 16TUR812TUR1014TUR108TUR1216TUR12

- -

1-SRATT-22-SRATT-12-SRATT-22-SRATT-42-SRATT-64-SRATT-24-SRATT-44-SRATT-64-SRATT-85-SRATT-66-SRATT-46-SRATT-66-SRATT-86-SRATT-106-SRATT-128-SRATT-48-SRATT-68-SRATT-88-SRATT-108-SRATT-128-SRATT-148-SRATT-1610-SRATT-1210-SRATT-1412-SRATT-812-SRATT-1614-SRATT-1616-SRATT-16

2-1 TRBZ1-2 TRBZ2-2 TRBZ4-2 TRBZ6-2 TRBZ2-4 TRBZ4-4 TRBZ6-4 TRBZ8-4 TRBZ6-5 TRBZ4-6 TRBZ6-6 TRBZ8-6 TRBZ10-6 TRBZ12-6 TRBZ4-8 TRBZ6-8 TRBZ

- 10-8 TRBZ12-8 TRBZ

- 16-8 TRBZ12-10 TRBZ14-10 TRBZ8-12 TRBZ16-12 TRBZ

--

1/161/81/81/81/81/41/41/41/45/163/83/83/83/83/81/21/21/21/21/21/21/25/85/83/43/47/8

1

1/81/161/81/43/81/81/43/81/23/81/43/81/25/83/41/43/81/25/83/47/8

13/47/81/2111

1.291.241.461.501.631.581.621.741.991.811.711.842.092.132.131.851.982.232.262.262.302.572.292.302.322.672.672.95

0.340.520.520.520.520.610.610.610.610.650.670.670.670.670.670.900.900.900.900.900.900.900.960.960.960.961.021.24

0.05 0.03 0.08 0.09 0.09 0.08 0.17 0.19 0.19 0.25 0.17 0.27 0.28 0.28 0.28 0.17 0.27 0.38 0.41 0.41 0.41 0.41 0.50 0.50 0.38 0.63 0.72 0.80

5/16 7/16 7/16 7/16 7/16 9/16 9/16 9/16 9/16 5/8

11/16 11/16 11/16 11/16 11/16 7/8 7/8 7/8 7/8 7/8 7/8 7/8

11

1 1/8 1 1/8 1 1/4 1 1/2

5/167/167/167/167/161/21/21/29/169/165/85/85/8

11/1613/1613/1613/1613/1613/1613/1615/161 1/1615/1615/161 1/161 1/161 3/161 3/8

E T1

A

T

B

NH

BH

27

DRATT/SRATTReducer Adapter Tube to Tube


TTUBEO.D.

AE

THRUHOLE

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

T1TUBEO.D.

4-DRPC-26-DRPC-48-DRPC-48-DRPC-612-DRPC-8

401-PC-2601-PC-4811-PC-4811-PC-61211-PC-8

2PC44PC64PC86PC88PC12

4-SRPC-26-SRPC-48-SRPC-48-SRPC-612-SRPC-8

2-4 ZPC4-6 ZPC4-8 ZPC6-8 ZPC8-12 ZPC

1/43/81/21/23/4

1/8 1/4 1/4 3/81/2

1.08 1.12 1.32 1.43 1.71

0.080.170.170.270.38

E T1 T

A

28

DRPC/SRPCReducing Port Connector


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

T1TUBEO.D.

BNH

NUTHEX

B1NH1NUTHEX

2-DRU-14-DRU-14-DRU-24-DRU-35-DRU-25-DRU-46-DRU-16-DRU-26-DRU-46-DRU-58-DRU-28-DRU-48-DRU-610-DRU-610-DRU-812-DRU-412-DRU-612-DRU-812-DRU-1016-DRU-816-DRU-12

200-6-1400-6-1400-6-2400-6-3500-6-2500-6-4600-6-1600-6-2600-6-4600-6-5810-6-2810-6-4810-6-61010-6-61010-6-81210-6-41210-6-61210-6-81210-6-101610-6-81610-6-12

2RU14RU14RU24RU35RU25RU46RU16RU26RU46RU58RU28RU48RU610RU610RU812RU412RU612RU812RU1016RU816RU12

2-SRU-14-SRU-14-SRU-24-SRU-35-SRU-25-SRU-46-SRU-16-SRU-26-SRU-46-SRU-58-SRU-28-SRU-48-SRU-610-SRU-610-SRU-812-SRU-412-SRU-612-SRU-812-SRU-1016-SRU-816-SRU-12

2-1 HBZ4-1 HBZ4-2 HBZ4-3 HBZ5-2 HBZ5-4 HBZ6-1 HBZ6-2 HBZ6-4 HBZ6-5 HBZ8-2 HBZ8-4 HBZ8-6 HBZ10-6 HBZ10-8 HBZ12-4 HBZ12-6 HBZ12-8 HBZ12-10 HBZ16-8 HBZ16-12 HBZ

1/81/41/41/45/165/163/83/83/83/81/21/21/25/85/83/43/43/43/4

11

1/161/161/83/161/81/41/161/81/45/161/81/43/83/81/21/43/81/25/81/23/4

1.231.351.521.551.591.681.451.621.711.761.791.851.911.942.051.942.012.112.112.482.49

0.520.610.610.610.650.650.670.670.670.670.900.900.900.960.960.960.960.960.961.241.24

0.340.340.520.540.520.610.340.520.610.650.520.610.670.670.900.610.670.900.960.900.96

0.050.050.090.130.090.190.050.090.190.250.090.190.280.280.410.190.280.410.500.410.63

7/169/169/169/165/85/8

11/1611/1611/1611/167/87/87/8

11

1 1/81 1/81 1/81 1/81 1/21 1/2

5/165/167/161/27/169/165/167/169/165/87/169/1611/1611/167/89/1611/167/8

17/8

1 1/8

7/161/21/21/29/169/165/85/85/85/8

13/1613/1613/1615/1615/161 1/161 1/161 1/161 1/161 3/81 3/8

E T T1

A

B B1

NH NH1

BH

29

DRU/SRUReducer Union


TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

PIPEWELDSIZE

BNH1NUTHEX

F

4-DTBW-46-DTBW-46-DTBW-66-DTBW-88-DTBW-68-DTBW-88-DTBW-1612-DTBW-1216-DTBW-1216-DTBW-16

400-1-4W

600-1-4W

600-1-6W

600-1-8W

810-1-6W

810-1-8W

810-1-16W

1210-1-12W

1610-1-12W

1610-1-16W

4-1/4 ZHLW2

6-1/4 ZHLW2

6-3/8 ZHLW2

6-1/2 ZHLW2

8-3/8 ZHLW2

8-1/2 ZHLW2

-

12-3/4 ZHLW2

- 16-1-ZHLW2

4-STBW-46-STBW-46-STBW-66-STBW-88-STBW-68-STBW-88-STBW-1612-STBW-1216-STBW-1216-STBW-16

4-1/4 ZHBW26-1/4 ZHBW26-3/8 ZHBW26-1/2 ZHBW28-3/8 ZHBW28-1/2 ZHBW2

- 12-3/4 ZHBW2

- 16-1-ZHBW2

1/43/83/83/81/21/21/23/4

11

1/4 1/4 3/8 1/2 3/8 1/2 1

3/4 3/4

1

1.481.581.581.831.711.932.181.992.242.46

0.610.670.670.670.900.900.900.961.241.24

0.19 0.28 0.28 0.28 0.41 0.41 0.41 0.63 0.63 0.88

0.540.540.680.840.680.841.321.051.051.32

9/1611/1611/1611/167/87/87/8

1 1/81 1/21 1/2

9/165/83/47/8

13/167/8

1 3/81 1/161 3/81 3/8

E F

37.5°

A

T

B

NH

BH

30

DTBW/STBWTube to Pipe Butt Weld Connector

NOTE: Dimensions subject to change, to be used for reference only. Wall Thickness at weld end is based ob schedule 80 pipe.

*Fittings may have a larger ID on weld end.

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

T1TUBEO.D.

B FNH1NUTHEX

G

4-DTSW-48-DTSW-8

12-DTSW-1216-DTSW-16

400-6-4W 4-4 ZHLW

810-6-8W 8-8 ZHLW

1210-6-12W1 2-12 ZHLW

1610-6-16W1 6-16 ZHLW

4-STSW-48-STSW-8

12-STSW-1216-STSW-16

4-4 ZHBW8-8 ZHBW

12-12 ZHBW16-16 ZHBW

1/41/23/4

1

1/41/23/4

1

1.321.621.712.09

0.610.900.961.24

0.19 0.41 0.63 0.88

0.48 0.73 1.04 1.36

0.280.380.440.62

9/167/8

1 1/81 1/2

1/213/161 1/161 3/8

F E T1 T

B

A

G

NH

BH

31

DTSW/STSWTube to Tube Socket Weld Connector


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

BNH

NUTHEX

1-DU2-DU3-DU4-DU5-DU6-DU8-DU10-DU12-DU14-DU16-DU

100-6200-6300-6400-6500-6600-6810-61010-61210-61410-61610-6

1SC12SC2 3SC3 4SC4 5SC5 6SC6 8SC8

10SC10 12SC1214SC1416SC16

1-SU2-SU3-SU4-SU5-SU6-SU8-SU10-SU12-SU14-SU16-SU

1-1 HBZ2-2 HBZ3-3 HBZ4-4 HBZ5-5 HBZ6-6 HBZ8-8 HBZ

10-10 HBZ12-12 HBZ14-14 HBZ16-16 HBZ

1/161/83/161/4 5/163/8 1/2 5/8 3/4 7/8

1

1.001.411.471.611.721.782.022.042.112.172.58

0.34 0.52 0.54 0.61 0.65 0.67 0.90 0.96 0.96 1.02 1.24

0.050.090.130.190.250.280.410.500.630.720.88

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

5/167/167/161/29/165/8

13/1615/161 1/161 3/161 3/8

E

A

T

B BH

NH

32

DU/SUUnion


TTUBEO.D.

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER


NHNUTHEX

2-DUANF-22-DUANF-44-DUANF-45-DUANF-55-DUANF-66-DUANF-46-DUANF-68-DUANF-8

10-DUANF-1012-DUANF-1216-DUANF-16

2XASC2 4XASC2 4XASC4 5XASC5

- 4XASC6 6XASC6 8XASC8

10XASC10 12XASC12 16XASC16

2-SUANF-22-SUANF-44-SUANF-45-SUANF-55-SUANF-66-SUANF-46-SUANF-68-SUANF-8

10-SUANF-1012-SUANF-1216-SUANF-16

2-2 XHBZ4-2 XHBZ4-4 XHBZ5-5 XHBZ

- 4-6 XHBZ6-6 XHBZ8-8 XHBZ

10-10 XHBZ12-12 XHBZ16-16 XHBZ

1/81/81/45/165/163/8 3/8 1/25/8 3/4

1

5/16-24 UNJF7/16-20 UNJF7/16-20 UNJF1/2-20 UNJF9/16-18 UNJF7/16-20 UNJF9/16-18 UNJF3/4-16 UNJF7/8-14 UNJF1-1/16-12 UNJ1-5/16-12 UNJ

1.251.391.481.531.541.561.561.801.932.102.43

0.520.520.610.650.650.670.670.900.960.961.24

0.060.090.170.230.250.170.300.390.480.610.85

7/167/169/165/8 5/8 11/1611/167/8

11 1/8 1 1/2

7/161/21/29/165/85/85/8

13/1615/161 1/81 3/8

E

A

T

B

NH

BH37

THREAD

33

DUANF/SUANFTube to AN Flare Union


TTUBEO.D.

AE

THRUHOLE

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH B

NHNUTHEX

WWRENCH

FLAT

1-DELU-12-DELU-23-DELU-34-DELU-45-DELU-56-DELU-68-DELU-8

10-DELU-1012-DELU-1214-DELU-1416-DELU-16

100-9200-9300-9400-9500-9600-9810-91010-91210-9 1410-9 1610-9

1EE12EE2 3EE3 4EE4 5EE5 6EE6 8EE8

10EE10 12EE12 14EE14 16EE16

1-SELU-12-SELU-23-SELU-34-SELU-45-SELU-56-SELU-68-SELU-8

10-SELU-1012-SELU-1214-SELU-1416-SELU-16

1-1 EBZ2-2 EBZ3-3 EBZ4-4 EBZ5-5 EBZ6-6 EBZ8-8 EBZ

10-10 EBZ12-12 EBZ14-14 EBZ16-16 EBZ

1/161/83/161/45/163/81/25/83/47/8

1

0.800.981.001.061.181.201.421.501.571.761.95

0.340.520.540.610.650.670.900.960.961.021.24

0.05 0.09 0.13 0.19 0.25 0.28 0.41 0.50 0.63 0.72 0.88

5/16 7/16 1/2 9/165/8

11/167/8

11 1/8 1 1/4 1 1/2

1/21/21/21/25/85/8

13/1615/161 1/161 3/81 3/8

T

A

A

B

E

W

NH

34

DELU/SELUUnion Elbow


TTUBEO.D.

AE

THRUHOLE

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH B

NHNUTHEX

WWRENCH

FLAT

4-DELU45-46-DELU45-68-DELU45-8

12-DELU45-12

400-95-

810-95

4-SELU45-46-SELU45-68-SELU45-8

12-SELU45-12

- - -

1/43/81/23/4

0.97 1.11 1.26 1.33

0.610.670.900.96

0.190.280.410.63

9/1611/167/8

1 1/8

1/25/8

13/161 1/16

T

A

A

E

B

W

NH

35

DELU45/SELU45Union 45° Elbow


2-DFE-2B-2-DFE-22-DFE-4

B-2-DFE-44-DFE-2

B-4-DFE-2 4-DFE-4

B-4-DFE-4 4-DFE-64-DFE-85-DFE-25-DFE-4

B-5-DFE-4 6-DFE-26-DFE-4

B-6-DFE-4 6-DFE-66-DFE-88-DFE-28-DFE-48-DFE-68-DFE-88-DFE-1210-DFE-610-DFE-812-DFE-812-DFE-1214-DFE-1216-DFE-16

200-8-2200-8-2200-8-4200-8-4400-8-2400-8-2400-8-4400-8-4400-8-6400-8-8500-8-2500-8-4500-8-4600-8-2600-8-4600-8-4600-8-6600-8-8

- 810-8-4810-8-6810-8-8810-8-121010-8-61010-8-81210-8-81210-8-121410-8-121610-8-16

2FEL2N 2FEL2N 2FEL4N 2FEL4N 4FEL2N 4FEL2N 4FEL4N 4FEL4N 4FEL6N 4FEL8N 5FEL2N 5FEL4N 5FEL4N 6FEL2N 6FEL4N 6FEL4N 6FEL6N 6FEL8N

8FEL4N 8FEL6N 8FEL8N

10FEL6N 10FEL8N 12FEL8N 12FEL12N 14FEL12N 16FEL16N

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

B

2-SFE-2B-2-SFE-22-SFE-4

B-2-SFE-44-SFE-2

B-4-SFE-24-SFE-4

B-4-SFE-44-SFE-64-SFE-85-SFE-25-SFE-4

B-5-SFE-46-SFE-26-SFE-4

B-6-SFE-46-SFE-66-SFE-88-SFE-28-SFE-48-SFE-68-SFE-88-SFE-1210-SFE-610-SFE-812-SFE-812-SFE-1214-SFE-1216-SFE-16

2-2 DBZ2-2 DBZ2-4 DBZ2-4 DBZ4-2 DBZ4-2 DBZ4-4 DBZ4-4 DBZ4-6 DBZ4-8 DBZ5-2 DBZ5-4 DBZ5-4 DBZ6-2 DBZ6-4 DBZ6-4 DBZ6-6 DBZ6-8 DBZ

8-4 DBZ8-6 DBZ8-8 DBZ

10-6 DBZ10-8 DBZ12-8 DBZ12-12 DBZ14-12 DBZ16-16 DBZ

1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 1/21/21/21/21/25/85/83/43/47/8

1

1/81/81/41/41/81/81/41/43/81/21/81/41/41/81/41/43/81/21/81/43/81/23/43/81/21/23/43/4

1

0.981.051.091.161.061.141.171.251.251.401.181.221.301.201.241.321.321.471.421.421.421.571.761.501.571.571.761.762.12

0.750.750.880.880.750.750.880.880.881.130.750.880.880.750.880.880.881.130.880.880.881.131.250.881.131.131.251.251.50

0.52 0.52 0.52 0.52 0.61 0.61 0.61 0.61 0.61 0.61 0.65 0.65 0.65 0.67 0.67 0.67 0.67 0.67 0.90 0.90 0.90 0.90 0.90 0.96 0.96 0.96 0.96 1.02 1.24

0.09 0.09 0.09 0.09 0.19 0.19 0.19 0.19 0.19 0.19 0.25 0.25 0.25 0.28 0.28 0.28 0.28 0.28 0.33 0.41 0.41 0.41 0.41 0.50 0.50 0.63 0.63 0.72 0.88

7/167/167/167/169/169/169/169/169/169/165/85/85/8

11/1611/1611/1611/1611/167/87/87/8 7/87/8

11

1 1/81 1/81 1/41 1/2

1/25/8

11/1613/161/25/8

11/1613/1613/161 1/16

5/811/1613/165/8

11/1613/1613/161 1/1613/1613/1613/161 1/161 3/815/161 1/161 1/161 3/81 3/81 5/8

E

A

T

B

A1

W

NH

P

36

DFE/SFEFemale Elbow


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

B

1-DME-11-DME-22-DME-12-DME-22-DME-4

B-2-DME-42-DME-6

B-2-DME-63-DME-23-DME-4

B-3-DME-44-DME-14-DME-24-DME-4

B-4-DME-44-DME-6

B-4-DME-64-DME-84-DME-125-DME-25-DME-45-DME-6

B-5-DME-66-DME-26-DME-46-DME-6

B-6-DME-66-DME-86-DME-128-DME-28-DME-48-DME-68-DME-88-DME-128-DME-1610-DME-410-DME-610-DME-810-DME-1212-DME-412-DME-612-DME-812-DME-1212-DME-1614-DME-814-DME-1216-DME-816-DME-1216-DME-16

100-2-1100-2-2200-2-1200-2-2200-2-4200-2-4200-2-6200-2-6300-2-2300-2-4300-2-4400-2-1400-2-2400-2-4400-2-4400-2-6400-2-6400-2-8400-2-12500-2-2500-2-4500-2-6500-2-6600-2-2600-2-4600-2-6600-2-6600-2-8600-2-12810-2-2810-2-4810-2-6810-2-8810-2-12810-2-16

- 1010-2-61010-2-81010-2-12

- -

1210-2-81210-2-121210-2-16

- 1410-2-12

- 1610-2-121610-2-16

1MSEL1N 1MSEL2N 2MSEL1N 2MSEL2N 2MSEL4N 2MSEL4N

- -

3MSEL2N 3MSEL4N 3MSEL4N 4MSEL1N 4MSEL2N 4MSEL4N 4MSEL4N 4MSEL6N 4MSEL6N 4MSEL8N

- 5MSEL2N 5MSEL4N

- -

6MSEL2N 6MSEL4N 6MSEL6N 6MSEL6N 6MSEL8N 6MSEL12N

- 8MSEL4N 8MSEL6N 8MSEL8N 8MSEL12N

- -

10MSEL6N 10MSEL8N 10MSEL12N

- -

12MSEL8N 12MSEL12N

- -

14MSEL12N -

16MSEL12N 16MSEL16N

1-SME-11-SME-22-SME-12-SME-22-SME-4

B-2-SME-42-SME-6

B-2-SME-63-SME-23-SME-4

B-3-SME-44-SME-14-SME-24-SME-4

B-4-SME-44-SME-6

B-4-SME-64-SME-84-SME-125-SME-25-SME-45-SME-6

B-5-SME-66-SME-26-SME-46-SME-6

B-6-SME-66-SME-86-SME-128-SME-28-SME-48-SME-68-SME-88-SME-128-SME-1610-SME-410-SME-610-SME-810-SME-1212-SME-4 12-SME-6 12-SME-812-SME-1212-SME-1614-SME-8 14-SME-1216-SME-8 16-SME-1216-SME-16

1-1 CBZ1-2 CBZ2-1 CBZ2-2 CBZ2-4 CBZ2-4 CBZ

--

3-2 CBZ3-4 CBZ3-4 CBZ4-1 CBZ4-2 CBZ4-4 CBZ4-4 CBZ4-6 CBZ4-6 CBZ4-8 CBZ

- 5-2 CBZ5-4 CBZ

- -

6-2 CBZ6-4 CBZ6-6 CBZ6-6 CBZ6-8 CBZ6-12 CBZ

- 8-4 CBZ8-6 CBZ8-8 CBZ8-12 CBZ

- -

10-6 CBZ10-8 CBZ10-12 CBZ

- -

12-8 CBZ12-12 CBZ

- -

14-12 CBZ-

16-12 CBZ16-16 CBZ

1/16 1/16 1/8 1/8 1/8 1/8 1/81/83/163/16 3/16 1/41/41/41/41/41/41/41/45/165/16 5/165/163/83/83/83/83/83/81/21/21/21/21/21/25/85/85/85/83/43/43/43/43/47/87/8

111

1/161/81/161/81/41/43/83/81/81/41/41/161/81/41/43/83/81/23/41/81/43/83/81/81/43/83/81/23/41/81/43/81/23/4

11/4 3/81/23/41/43/81/23/4

11/23/41/23/4

1

0.80 0.80 0.98 0.98 0.98 1.05 1.09 1.16 1.00 1.00 1.07 1.06 1.06 1.06 1.14 1.17 1.25 1.25 1.40 1.18 1.18 1.22 1.30 1.20 1.20 1.24 1.32 1.32 1.47 1.42 1.42 1.42 1.42 1.57 1.76 1.50 1.50 1.50 1.57 1.57 1.57 1.57 1.57 1.76 1.76 1.76 1.95 1.95 1.95

0.74 0.74 0.74 0.74 0.93 1.00 1.03 1.11 0.74 0.93 1.00 0.74 0.74 0.93 1.00 1.03 1.11 1.30 1.45 0.82 1.00 1.03 1.11 0.82 1.00 1.03 1.11 1.30 1.45 0.92 1.11 1.11 1.30 1.45 1.83 1.19 1.19 1.38 1.45 1.25 1.25 1.45 1.45 1.83 1.64 1.64 1.64 1.64 1.83

0.34 0.34 0.52 0.52 0.52 0.52 0.52 0.52 0.54 0.54 0.54 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.65 0.65 0.65 0.65 0.67 0.67 0.67 0.67 0.67 0.67 0.90 0.90 0.90 0.90 0.90 0.90 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96 1.02 1.02 1.24 1.24 1.24

0.05 0.05 0.09 0.09 0.09 0.09 0.09 0.09 0.13 0.13 0.13 0.13 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.25 0.25 0.25 0.19 0.28 0.28 0.28 0.28 0.28 0.19 0.28 0.38 0.41 0.41 0.41 0.28 0.38 0.47 0.50 0.28 0.38 0.47 0.63 0.63 0.47 0.63 0.47 0.63 0.88

5/16 5/16 7/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8

11/16 11/16 11/16 11/16 11/16 11/16 7/8 7/8 7/8 7/8 7/8 7/8

1111

1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2

1/21/21/21/21/25/8

11/1613/161/21/25/81/21/21/25/8

11/1613/1613/161 1/16

5/85/8 11/1613/165/85/8

11/1613/1613/161 1/1613/1613/1613/1613/161 1/161 3/815/1615/1615/161 1/161 1/161 1/161 1/161 1/161 3/81 3/81 3/81 3/81 3/81 3/8

E

T

A

B

A1

NH

W

P

37

DME/SMEMale Elbow


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

B

4-DME45-24-DME45-46-DME45-46-DME45-68-DME45-8

400-5-2400-5-4600-5-4600-5-6810-5-8

4MVEL2N4MVEL4N6MVEL4N6MVEL6N

-

4-SME45-24-SME45-46-SME45-46-SME45-68-SME45-8

4-2 VBZ 4-4 VBZ 6-4 VBZ 6-6 VBZ

-

1/41/43/83/81/2

1/81/41/43/81/2

0.970.971.111.151.26

0.650.830.900.951.14

0.61 0.61 0.67 0.67 0.90

0.19 0.19 0.28 0.28 0.41

9/169/1611/1611/167/8

1/21/25/8

13/1613/16

T

E

A

B

A1

NH

W

P

38

DME45/SME45Male 45° Elbow


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH1NUTHEX

B F

6-DTBWE-48-DTBWE-812-DTBWE-12

600-2-4W

810-2-8W1210-2-12W

6-1/4 ZELW2

8-1/2 ZELW212-3/4 ZELW2

6-STBWE-48-STBWE-8

12-STBWE-12

6-1/4 ZEBW28-1/2 ZEBW212-3/4 ZEBW2

3/81/23/4

1/41/23/4

1.201.421.57

1.001.311.48

0.670.900.96

0.28 0.41 0.63

0.54 0.84 1.05

11/167/8

1 1/8

5/813/161 1/16

T

A

B

F

E

37.5°

A1

W

NH

39

DTBWE/STBWETube to Pipe Butt Weld Elbow

NOTE: Dimensions subject to change, to be used for reference only. Wall Thickness at weld end is based on schedule 80 pipe.

*Fittings may have a larger ID on weld end

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

T1TUBEO.D.

A1NH1NUTHEX

B G

6-DTSWE-6 600-9-6W 6-6 ZELW 6-STSWE-6 6-6 ZEBW 3/8 3/8 1.20 0.91 0.67 0.28 0.31 11/16 5/8

A

T

G

E

B

A1

T1

NH

W

40

DTSWE/STSWETube to Tube Socket Weld Elbow


CSPART

NUMBERINTERCHANGES

WITHT

TUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

A2 B

2-STFT-24-STFT-24-STFT-46-STFT-46-STFT-6

B-6-STFT-68-STFT-48-STFT-6

B-8-STFT-68-STFT-810-STFT-812-STFT-1216-STFT-1216-STFT-16

2-2-2 MBZ4-2-4 MBZ4-4-4 MBZ6-4-6 MBZ

- -

8-4-8 MBZ8-6-8 MBZ8-6-8 MBZ8-8-8 MBZ

10-8-10 MBZ12-12-12 MBZ16-12-16 MBZ16-16-16 MBZ

1/8 1/4 1/4 3/8 3/83/81/21/21/21/25/83/4

11

1/81/81/41/43/83/81/43/83/81/21/23/43/4

1

1.801.892.132.192.192.302.302.302.572.702.693.013.203.62

1.051.141.251.321.321.431.421.421.571.571.571.761.952.12

0.750.750.880.880.880.880.880.881.001.131.131.251.251.50

0.520.610.610.670.670.670.900.900.900.900.960.961.241.24

0.09 0.19 0.19 0.28 0.28 0.28 0.41 0.41 0.41 0.41 0.50 0.63 0.88 0.88

7/169/169/1611/1611/1611/167/87/87/87/8

11 1/81 1/21 1/2

5/85/8

13/1613/1613/16

113/1613/161 1/161 1/161 1/161 3/81 3/81 5/8

CBCPART

NUMBERINTERCHANGES

WITH

2-DTFT-24-DTFT-24-DTFT-46-DTFT-46-DTFT-6

B-6-DTFT-68-DTFT-48-DTFT-6

B-8-DTFT-68-DTFT-810-DTFT-812-DTFT-1216-DTFT-1216-DTFT-16

200-3TFT400-3TFT

400-3-4TFT600-3TFT

600-3-3TFT600-3-3TFT

- 810-3TFT810-3TFT

810-3-3TFT-

1210-3TFT1610-3-12TFT

1610-3TFT

2FRT2N4FRT2N4FRT4N6FRT4N

- -

8FRT4N8FRT6N8FRT6N8FRT8N10FRT8N12FRT12N16FRT12N16FRT16N

T

A

B

A1

A1

E

A2

P

W

NH

41

DTFT/STFTFemale Run Tee


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

A2 B

2-DTMT-22-DTMT-44-DTMT-24-DTMT-45-DTMT-26-DTMT-46-DTMT-68-DTMT-68-DTMT-8

B-8-DTMT-810-DTMT-812-DTMT-1214-DTMT-614-DTMT-8

200-3TMT200-3-4TMT400-3TMT

400-3-4TMT500-3TMT600-3TMT

600-3-6TMT810-3TMT

810-3-8TMT810-3-8TMT1010-3TMT1210-3TMT

- -

2MRT2N2MRT4N4MRT2N4MRT4N5MRT2N6MRT4N6MRT6N8MRT6N8MRT8N8MRT8N10MRT8N12MRT12N

- -

2-STMT-22-STMT-44-STMT-24-STMT-45-STMT-26-STMT-46-STMT-68-STMT-68-STMT-8

B-8-STMT-810-STMT-812-STMT-1214-STMT-614-STMT-8

2-2-2 RBZ2-4-2 RBZ4-2-4 RBZ4-4-4 RBZ5-2-5 RBZ6-4-6 RBZ6-6-6 RBZ8-6-8 RBZ8-8-8 RBZ8-8-8 RBZ

10-8-10 RBZ12-12-12 RBZ

- -

1/8 1/8 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 7/87/8

1/81/41/81/41/81/43/83/81/21/21/23/43/81/2

1.72 1.99 1.81 2.08 2.01 2.15 2.38 2.48 2.72 2.95 2.94 2.95 3.21 3.26

0.981.051.061.141.191.211.321.421.421.571.571.571.761.76

0.74 0.94 0.74 0.94 0.82 0.94 1.06 1.06 1.30 1.38 1.38 1.38 1.45 1.50

0.520.520.610.610.650.670.670.900.900.900.960.931.021.02

0.090.090.190.190.190.280.280.410.410.410.470.630.380.47

7/167/169/169/165/8

11/1611/167/87/87/8

11 1/81 1/41 1/4

1/25/81/25/85/85/8

13/1613/1613/161 1/161 1/161 1/161 3/81 3/8

T

B

A

A1

E

A1 A2

NH

W

P

42

DTMT/STMTMale Run Tee


CSPART

NUMBERINTERCHANGES

WITH

2-STTF-24-STTF-24-STTF-44-STTF-64-STTF-86-STTF-46-STTF-68-STTF-48-STTF-6

B-8-STTF-68-STTF-810-STTF-812-STTF-1214-STTF-614-STTF-1216-STTF-1216-STTF-16

2-2-2 OBZ4-4-2 OBZ4-4-4 OBZ

- -

6-6-4 OBZ-

8-8-4 OBZ8-8-6 OBZ8-8-6 OBZ8-8-8 OBZ

10-10-8 OBZ12-12-12 OBZ

- 14-14-12 OBZ16-16-12 OBZ16-16-16 OBZ

CBCPART

NUMBERINTERCHANGES

WITH

2-DTTF-24-DTTF-24-DTTF-44-DTTF-64-DTTF-86-DTTF-46-DTTF-68-DTTF-48-DTTF-6

B-8-DTTF-68-DTTF-810-DTTF-812-DTTF-1214-DTTF-614-DTTF-1216-DTTF-1216-DTTF-16

200-3TTF400-3TTF

400-3-4TTF--

600-3TTF600-3-6TTF810-3-4TTF810-3TTF810-3TTF

810-3-8TTF1010-3TTF1210-3TTF

- -

1610-3-12TTF1610-3TTF

2FBT2N4FBT2N4FBT4N

- -

6FBT4N-

8FBT4N8FBT6N8FBT6N8FBT8N10FBT8N12FBT12N

- 14BFT12N16BFT12N16BFT16N

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

A2 B

1/8 1/4 1/4 1/41/43/83/81/21/21/21/25/83/47/87/8

11

1/8 1/81/43/81/21/43/81/43/83/81/21/23/43/83/43/4

1

2.112.292.512.512.802.632.632.842.843.143.143.143.523.513.513.894.23

1.05 1.14 1.25 1.25 1.40 1.32 1.32 1.42 1.42 1.57 1.57 1.57 1.76 1.76 1.76 1.95 2.12

0.75 0.75 0.88 0.88 1.13 0.88 0.88 0.88 0.88 1.13 1.13 1.13 1.25 1.25 1.25 1.25 1.50

0.52 0.61 0.61 0.61 0.61 0.67 0.67 0.90 0.90 0.90 0.90 0.96 0.96 1.02 1.02 1.24 1.24

0.090.190.190.190.190.280.280.410.410.410.410.500.630.560.720.880.88

7/169/169/169/169/1611/1611/167/87/87/87/8

11 1/81 1/41 1/41 1/21 1/2

5/85/8

13/1613/161 1/1613/1613/1613/1613/161 1/161 1/161 1/161 3/81 3/81 3/81 3/81 5/8

A

A1

B

T E

A2

NH

W

P

43

DTTF/STTFFemale Branch Tee


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

2-DTTM-22-DTTM-43-DTTM-24-DTTM-24-DTTM-45-DTTM-25-DTTM-46-DTTM-46-DTTM-68-DTTM-48-DTTM-6

B-8-DTTM-68-DTTM-8

B-8-DTTM-810-DTTM-812-DTTM-12

200-3TTM200-3-4TTM 300-3TTM400-3TTM

400-3-4TTM 500-3TTM

-600-3TTM

600-3-6TTM 810-3-4TTM810-3TTM810-3TTM

810-3-8TTM 810-3-8TTM 1010-3TTM 1210-3TTM

2MBT2N 2MBT4N3MBT2N 4MBT2N 4MBT4N5MBT2N 5MBT4N6MBT4N6MBT6N

- 8MBT6N 8MBT6N 8MBT8N8MBT8N 10MBT8N 12MBT12N

2-STTM-22-STTM-43-STTM-24-STTM-24-STTM-45-STTM-25-STTM-46-STTM-46-STTM-68-STTM-48-STTM-6

B-8-STTM-68-STTM-8

B-8-STTM-810-STTM-812-STTM-12

2-2-2 SBZ2-2-4 SBZ3-3-2 SBZ4-4-2 SBZ4-4-4 SBZ5-5-2 SBZ5-5-4 SBZ6-6-4 SBZ6-6-6 SBZ

-8-8-6 SBZ8-8-6 SBZ8-8-8 SBZ8-8-8 SBZ

10-10-8 SBZ12-12-12 SBZ

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLAT

P PIPE END NPT

A1NH

NUTHEX

A2 B

1/8 1/8 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/21/21/21/21/25/83/4

1/81/41/81/81/41/81/41/43/81/43/83/81/21/21/23/4

1.952.112.002.132.292.382.382.422.632.842.842.842.843.143.143.14

0.981.051.001.061.141.191.191.211.321.421.421.421.421.571.571.57

0.74 0.94 0.74 0.74 0.94 0.82 0.94 0.94 1.06 1.11 1.11 1.06 1.30 1.38 1.38 1.38

0.52 0.52 0.54 0.61 0.61 0.65 0.65 0.67 0.67 0.90 0.90 0.90 0.90 0.90 0.96 0.96

0.090.090.130.190.190.190.250.280.280.280.380.380.410.410.470.63

7/167/161/29/169/165/85/8

11/1611/167/87/87/87/87/8

11 1/8

1/25/81/21/25/85/85/85/8

13/1613/1613/1613/1613/161 1/161 1/161 1/16

T

A

E

A1

B

A2 NH

W

P

44

DTTM/STTMMale Branch Tee


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLATA1

NH1NUTHEX

A2 BNH

NUTHEX

B1

1-DTTT-12-DTTT-23-DTTT-34-DTTT-45-DTTT-56-DTTT-68-DTTT-8

10-DTTT-1012-DTTT-1214-DTTT-1416-DTTT-16

100-3200-3300-3400-3500-3600-3810-3 1010-31210-31410-31610-3

1ET1 2ET2 3ET3 4ET4 5ET5 6ET6 8ET8

10ET10 12ET12 14ET14 16ET16

1-STTT-12-STTT-23-STTT-34-STTT-45-STTT-56-STTT-68-STTT-8

10-STTT-1012-STTT-1214-STTT-1416-STTT-16

1-1-1 JBZ2-2-2 JBZ3-3-3 JBZ4-4-4 JBZ5-5-5 JBZ6-6-6 JBZ8-8-8 JBZ

10-10-10 JBZ12-12-12 JBZ14-14-14 JBZ16-16-16 JBZ

1/16 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8

1

1.61 1.95 2.00 2.13 2.38 2.42 2.84 3.14 3.14 3.51 3.89

0.800.981.001.061.191.211.421.571.571.761.95

- - - - - - - - - - -

0.340.520.540.610.650.670.900.960.961.021.24

- - - - - - - - - - -

0.050.090.130.190.250.280.410.500.630.720.88

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

- - - - - - - - - - -

1/21/21/21/25/85/8

13/161 1/161 1/161 3/81 3/8

A

A1

B

A1

T E

NH

F

DTTT/STTTUnion Tee

45


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLATA1

NH1NUTHEX

A2 BNH

NUTHEX

B1T1

TUBEO.D.

4-DTTT-4-26-DTTT-6-48-DTTT-8-48-DTTT-8-6

12-DTTT-12-612-DTTT-12-816-DTTT-16-416-DTTT-16-616-DTTT-16-816-DTTT-16-12

400-3-4-2600-3-6-4810-3-8-4810-3-8-6

1210-3-12-61210-3-12-81610-3-16-41610-3-16-61610-3-16-81610-3-16-12

4-4-2 JLZ6-6-4 JLZ8-8-4 JLZ8-8-6 JLZ

12-12-6 JLZ12-12-8 JLZ16-16-4 JLZ16-16-6 JLZ16-16-8 JLZ16-16-12 JLZ

4-STTT-4-26-STTT-6-48-STTT-8-48-STTT-8-6

12-STTT-12-612-STTT-12-816-STTT-16-416-STTT-16-616-STTT-16-816-STTT-16-12

4-4-2 JBZ6-6-4 JBZ8-8-4 JBZ8-8-6 JBZ

12-12-6 JBZ12-12-8 JBZ16-16-4 JBZ16-16-6 JBZ16-16-8 JBZ16-16-12 JBZ

1/43/81/21/23/43/4

1111

1/8 1/4 1/4 3/8 3/8 1/2 1/4 3/8 1/2 3/4

2.132.422.842.843.143.143.893.893.893.89

1.06 1.21 1.42 1.42 1.57 1.57 1.95 1.95 1.95 1.95

0.981.141.251.321.471.571.591.651.761.58

0.61 0.67 0.90 0.90 0.96 0.96 1.24 1.24 1.24 1.24

0.520.610.610.670.670.900.610.670.900.96

0.19 0.19 0.19 0.28 0.28 0.41 0.19 0.28 0.41 0.63

9/16 11/167/87/8

1 1/81 1/8 1 1/21 1/2 1 1/21 1/2

7/16 9/16 9/16 11/1611/167/89/16 11/167/8

1 1/8

1/25/8

13/1613/161 1/161 1/161 3/81 3/81 3/81 3/8

CBCPART

NUMBERINTERCHANGES

WITHT

TUBEO.D.

AE

THRUHOLE

WWRENCH

FLATA1

NH1NUTHEX

A2 BNH

NUTHEX

B1T1

TUBEO.D.

6-DTTT-4-66-DTTT-6-8

600-3-4-6600-3-6-8

6-4-6 JLZ-

3/8 3/8

1/41/2

2.352.63

1.211.32

1.141.42

0.670.67

0.61 0.90

0.190.28

11/1611/16

9/16 7/8

5/813/16

CSPART

NUMBERINTERCHANGES

WITH

6-STTT-4-66-STTT-6-8

6-4-6 JBZ-

A

B

T

A2

A1

T1

E

B1

T

NH

F

NH1

A1

B

A1

T

A

E

A2

T1

T

B1

NH

F

NH1

46

DTTT/STTTReducing Branch Tee, Reducing Run Tee



CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

AE

THRUHOLE

WWRENCH

FLATA1

NHNUTHEX

B

2-DCR4-DCR

B-4-DCR6-DCR8-DCR12-DCR

200-4400-4400-4600-4810-41210-4

2ECR24ECR44ECR46ECR68ECR8

12ECR12

2-SCR4-SCR

B-4-SCR6-SCR8-SCR12-SCR

2 KBZ 4 KBZ 4 KBZ 6 KBZ 8 KBZ 12 KBZ

1/81/41/43/81/23/4

1.842.112.332.402.833.14

0.921.061.171.201.411.57

0.520.610.610.670.900.96

0.09 0.19 0.19 0.28 0.41 0.63

7/169/169/1611/167/8

1 1/8

1/21/25/85/8

13/161 1/16

A

A

A1

B

T E

WNH

DCR/SCRUnion Cross

47


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

ETHRUHOLE

FTUBE

IDW

REF

3-TI-24-TI-206

4-TI-34-TI-1704-TI-25-TI-45-TI-35-TI-2

6-TI-2776-TI-46-TI-38-TI-68-TI-410-TI-810-TI-612-TI-1012-TI-816-TI-12

305-2-

405-3405-170405-2505-4505-3505-2

605-277605-4605-3815-6815-41015-8 1015-6 1215-10 1215-8 1615-12

- - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - -

3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4

1

0.09 0.16 0.14 0.11 0.09 0.19 0.13 0.09 0.22 0.19 0.13 0.31 0.19 0.44 0.31 0.56 0.44 0.69

0.031 0.022 0.031 0.040 0.062 0.031 0.062 0.094 0.049 0.062 0.094 0.062 0.125 0.062 0.125 0.062 0.125 0.125

1/80.2063/160.171/81/43/161/8

0.2771/43/163/81/4 1/23/85/81/23/4

E T F

W

48

TITubing Insert


CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

ANH

NUTHEX

DN-1 DN-2 DN-3 DN-4 DN-5 DN-6 DN-8 DN-10 DN-12 DN-14 DN-16

102-1202-1302-1402-1502-1602-1812-1 1012-11212-11412-11612-1

1NU1 2NU2 3NU3 4NU4 5NU5 6NU6 8NU8

10NU10 12NU12 14NU14 16NU16

SN-1SN-2SN-3SN-4SN-5SN-6SN-8SN-10SN-12SN-14SN-16

1 BZ 2 BZ 3 BZ 4 BZ 5 BZ 6 BZ 8 BZ 10 BZ 12 BZ 14 BZ 16 BZ

1/161/83/161/45/163/81/25/83/47/8

1

0.31 0.47 0.47 0.50 0.53 0.56 0.69 0.69 0.69 0.69 0.81

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

E

A

NH

DN/SNNut

49

NOTE: Dimensions subject to change, to be used for reference only. Tylok CS-Lok® nuts are coated with moldisulfide for reduced galling and lower installation torque. Tylok CBC-Lok® nuts are silver etched on the inside and coated with a proprietary ??? to reduce galling and lower installation torque.

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

ANH

NUTHEX

DKN-1 DKN-2 DKN-3 DKN-4 DKN-5 DKN-6 DKN-8 DKN-10 DKN-12 DKN-14 DKN-16

102-1K202-1K302-1K402-1K502-1K602-1K812-1K 1012-1K1212-1K1412-1K1612-1K

1 BZP2 BZP 3 BZP 4 BZP 5 BZP 6 BZP 8 BZP 10 BZP

- - -

SKN-1 SKN-2 SKN-3 SKN-4 SKN-5 SKN-6 SKN-8 SKN-10 SKN-12SKN-14SKN-16

1 BZP 2 BZP 3 BZP 4 BZP 5 BZP 6 BZP 8 BZP 10 BZP

- - -

1/161/83/16 1/45/16 3/8 1/2 5/83/47/8

1

0.31 0.47 0.47 0.50 0.53 0.56 0.69 0.69 0.69 0.69 0.81

5/167/161/29/165/8

11/167/8

11 1/81 1/41 1/2

E

A

NH

50

DKN/SKNKnurled Nut


CBCPART

NUMBERINTERCHANGES

WITH

TTUBEO.D.

CBCPART

NUMBERINTERCHANGES

WITH

TTUBEO.D.

DFC-1 DFC-2 DFC-3DFC-4DFC-5DFC-6DFC-8DFC-10DFC-12DFC-14DFC-16

103-1203-1303-1403-1503-1603-1813-11013-11213-11413-11613-1

1FF12FF23FF34FF45FF56FF68FF8

10FF1012FF1214FF1416FF16

1/161/83/161/45/163/81/25/83/47/8

1

DRC-1DRC-2DRC-3DRC-4DRC-5DRC-6DRC-8DRC-10DRC-12DRC-14DRC-16

104-1204-1304-1404-1504-1604-1814-11014-11214-11414-11614-1

1BF12BF23BF34BF45BF56BF68BF8

10BF1012BF1214BF1416BF16

1/161/83/161/45/163/81/25/83/47/8

1

T T

T T

CSPART

NUMBERINTERCHANGES

WITHT

TUBEO.D.

SC-1SC-2SC-3SC-4SC-5SC-6SC-8SC-10SC-12SC-14SC-16

1 TZ2 TZ3 TZ4 TZ5 TZ6 TZ8 TZ10 TZ12 TZ14 TZ16 TZ

1/161/83/161/45/163/81/25/83/47/8

1

ColletsFerrule

51

NOTE: Dimensions subject to change, to be used for reference only. NOTE: Dimensions subject to change, to be used for reference only.

COMPONENT REPLACEMENT PARTSCollet sets and Nut/Collet sets make for easy storage and handling of nuts and collets. CBC-Lok® & CS-Lok® components are precision made and should be handled with care. The components can be ordered on an arbor, which aids in careful handling and prevents them from coming off. Pinch the end of the arbor to release the components.


52

COLLET /NUT & COLLET SETS

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

DCSET-4-10 DCSET-6-10 DCSET-8-10 DCSET-12-10 DCSET-16-10

400-SET600-SET810-SET

--

4 ALOK-*-SET 6 ALOK-*-SET 8 ALOK-*-SET 12 ALOK-*-SET 16 ALOK-*-SET

SCSET-4-10SCSET-6-10SCSET-8-10SCSET-12-10SCSET-16-10

4-CPI-*-SET 6-CPI-*-SET 8-CPI-*-SET 12-CPI-*-SET 16-CPI-*-SET

1/43/81/23/4

1

CBCPART

NUMBERINTERCHANGES

WITHCS

PARTNUMBER

INTERCHANGESWITH

TTUBEO.D.

DNCSET-4-5 DNCSET-6-5 DNCSET-8-5 DNCSET-12-5 DNCSET-16-5

400-NFSET600-NFSET810-NFSET

- -

- - - - -

SNCSET-4-5SNCSET-6-5SNCSET-8-5 SNCSET-12-5SNCSET-16-5

- - - - -

1/43/81/23/4

1

COMPONENT REPLACEMENT PARTSCollet sets and Nut/Collet sets make for easy storage and handling of nuts and collets. CBC-Lok® & CS-Lok® components are precision made and should be handled with care. The components can be ordered on an arbor, which aids in careful handling and prevents them from coming off. Pinch the end of the arbor to release the components.



DGGGap Gage

53

CBCPART

NUMBER

TTUBEO.D.

1-DGG2-DGG3-DGG4-DGG5-DGG6-DGG8-DGG10-DGG12-DGG14-DGG16-DGG

468-DGG

1/161/83/161/45/163/81/25/83/47/8

11/4, 3/8, 1/26 mm, 12 mm


A

E

PBH

A

E

P

BH

54

1MDFMud Dauber

AE

THRUHOLE

BHBODYHEX

CBCPART

NUMBERINTERCHANGES

WITHPIPE

WELDSIZE

4-1MDF6-1MDF8-1MDF

PP-4-2MDF

PP-6-2MDF

MD-42 MDF MD-66 MDF MD-88 MDF - -- -

1/43/81/21/43/8

.81

.811.031.441.44

.28.41.50.28.28

9/1611/167/85/8

11/16


• Tylok Mud Daubers, also known as Vent Protector fittings, protect open endsof tubing, instruments, outlet vents and exhaust lines.

• Each Vent Protector has a 300 series stainless steel 40-mesh wire screen to preventobstructive foreign objects, such as insects, from entering and clogging a system.

• Straight Vent Protectors are available in either Stainless Steel or Brass.Add an SS or B in front of part number to specify the desired material.

• Angled Vent Protectors are available in Polypropylene (PP) only.

TYLOKProducts

55

DE-RATINGFACTOR

0.750.500.25

SIZE

Up to 1/2” (Size 8)1/2”-3/4” (Size 8 thru 12)7/8” - 1” (Size 14 and 16)

THERMOCOUPLE BORE THROUGH

A Thermocouple Connector can be furnished already bored through for an additional charge.

When Ordering:

1. Select required size male connector.See DMC/SMC pages for a listing ofavailable Male Connectors.

2. Add the letters “BT” to designatebore through. Example: 4-DMC-2-BT

NOTE: Multiply tube pressure rating (see Suggested Allowable Working Pressure tables) by de-rating factor to determine safe working pressure.

1 1/16”2 1/8” 3/43 3/16”4 1/4”5 5/16”6 3/8”8 1/2”

1-1/410 5/8”12 3/4”14 7/8”16 1”

Finger tight plus 3/4 turn

Finger tight plus 1-1/4 turn

NOTE: DF Plugs, -NF (Nut & Ferrule Pre-Assembles) require only 1/4 turn make-up.

Simply insert the tubing into the assembly, making sure the tubing seats firmly against the shoulder of the body and the nut is finger tight. High pressure applications and high safety-factor systems: Further tighten the nut until the tube will not turn by hand or move axially in the fitting.

Tighten nut with wrench the additional number of turns indicated above, while holding the fitting body with a second wrench.

56

INSTALLATION INSTRUCTIONS

CBC-LOK®/CS-LOK® INSTALLATION INSTRUCTIONS

CBC-Lok®/CS-Lok® Tube Fittings come completely assembled & ready for use, no disassembly required. Although there are some general guidelines to follow, no special preparation of the tubing is necessary. In overhead applications, Tylok recommends using a Pre-Set Tool.

NOTE: DF Plugs, -NF (Nut & Ferrule Pre-Assembles) require only 1/4 turn make-up.

TO REMOVE TUBE & RE-CONNECT TUBE FITTING

Mark the location of the nut with reference to the body before disassembly. For assembly, re-insert the tubing into the body until it is seated. With proper size wrench, re-tighten nut to original location by realigning previous marks. A noticeable amount or torque will develop when the nut is turned to original position. Next, rotate the nut slightly past original position to fully re-set the seal.Back off the nut until it is clear of the body and remove the tubing from the fitting.

TUBINGSelection & Preparation

57

Values in reverse text are not recommended for Gas Service.

75,000 PSI TensileNote: For welded and drawn tubing, a derating factor must be utilized. For double welded tube, multiply the above pressure rating by .85; and for single welded tube by .80 (ASME B31.3).

SUGGESTED ALLOWABLE WORKINGPRESSURE TABLES (psig)

TubeSize

Tube Wall Thickness (inches)

O.D. .028 .035 .049 .065 .083 .095 .109 .1201/8” 2700 36003/16” 1800 2300 3400 1/4” 1300 1600 2500 3500 5/16” 1300 1900 2700 3/8” 1000 1600 22001/2” 800 1100 1600 21005/8” 900 1200 1600 19003/4” 700 1000 1300 1500 18007/8” 600 800 1100 1300 1500

1” 500 700 1100 1300 1500

Tube Size O.D. .028 .035 .049 .065 .083 .095 .109 .1201/8” 8000 102003/16” 5100 6600 9600 1/4” 3700 4800 7000 9600 5/16” 3700 5500 7500 3/8” 3100 4500 62001/2” 2300 3200 4500 5900 5/8” 2600 3500 4600 5300 3/4” 2100 2900 3700 4300 5100 7/8” 1800 2400 3200 3700 4300

1” 2100 2700 3200 3700 4100

STAINLESS STEELTubeSizeO.D. .028 .035 .049 .065 .083 .095 .109 .120

1/8” 8500 109003/16” 5400 7000 10200 1/4” 4000 5100 7500 10200 5/16” 4000 5800 8000 3/8” 3300 4800 6500 1/2” 2600 3700 5100 67005/8” 2900 4000 5200 60003/4” 2400 3300 4200 4900 58007/8” 2000 2800 3600 4200 4800

1” 2400 3100 3600 4200 4700

COPPER


CARBON STEEL


1500

900

CBC-LOK® TUBING SELECTION & PREPARATIONProper selection of tubing is key to the performance of the fitting. When selecting the proper wall thickness and material, all tubing should be compatible with the process fluid, temperature, application, flow, and system pressure.

For proper sealing, it is recommended that tubing and fitting be of like material to allow for positive sealing (i.e., stainless on stainless, brass on copper, steel on steel). Galvanic corrosion could occur if the tubing and fitting are not of like material, with the exception of a brass fitting on copper tubing.

When using stainless steel tubing, Tylok recommends using Type 304 or 316 fully annealed, seamless or welded redrawn meeting ASTM A213, ASTM A269 or equivalent, with a suggested maximum hardness of 80 Rb.

For copper tubing, Tylok suggests using soft annealed, seamless tubing per ASTM B75 or equivalent. Copper water tube type K or L, soft annealed (Temper O) per ASTM B88 can also be used.

When using carbon steel, all tubing should be fully annealed and conform to ASTM A-179, or equivalent, with a maximum hardness of 72 Rb.

In general, all tubing should be free of nicks, scratches, or imperfections of any kind and should be suitable for bending. Tubing that does not easily go through fitting components should not be used. It is recommended that the charts be used for tube selection. Ideally, the tube end should be cut square so that when it bottoms out inside the fitting, an extra seal is provided. Avoid installing contaminated tubing into your system. For elevated temperatures, see Tube Pressure Derating Factors at Elevated Temperatures Chart.

CBC-Lok®/CS-Lok® Tube Fitting swage the tubing to achieve sealing. Thin wall tubing (wall thickness with working pressures highlighted in reverse text in the charts) is not recommended for Gas Service. See “Gas Service” on page 58.

When using tubing of a thinner or thicker wall than shown, it is always recommended that you consult with your local Distributor or contact Tylok International directly if there is any doubt of selecting tubing.

It is the responsibility of the Engineer to refer to the technical pages in this catalog to ensure selection of the proper tubing material, tubing compatibility with the fitting, media and tubingwall thickness.

Note: Tables, calculated to the right, are suggested maximum working pressure ratings, in accordance with ASME B31.3, but should be used for reference only. Tylok International Inc., is not responsible for its accuracy nor designs using these figures.

Following the stated recommendations will result in a safe application, free of leaks. The entire system must be considered when selecting the tube. Tylok tube fittings are designed to work to the tubing pressure ratings found in the charts below.

Values in reverse text are not recommended for Gas Service.

58

SAFETY & QUALITYGas Service

GAS SERVICEExtra care must be taken when tubing is used in gas service applications. Small gas molecules easily escape through minute leak paths; therefore, the tubing must be free of nicks, scratches and imperfections of any kind. When using large diameter tubing, the possibility of surface defects is increased further due to greater surface area. It is strongly recommended that the heavier wall thickness be selected. Penetration of the ferrules on thin wall tubing or soft material may not offer enough radial resistance for sealing.

GAP GAGEGap Gage can be purchased to ensure the Installer and Inspector that the nut has been properly tightened.

When fitting is properly tightened, gap gage should not fit between nut and shoulder of body.

QUALITY CONTROLAll components are manufactured & inspected to meet strict quality control standards in each phase of production. All employees are thoroughly trained to follow procedures, in accordance with the ISO 9001 Quality Standard, to ensure a quality product from the start of each job through completion.

PRECAUTIONS FOR WELD ENDCBC-Lok®/CS-Lok® Tube Fittings with weld ends offer the same positive sealing as all other Tylok fittings. Welding could deform the assembly, making pull ups or disassembly difficult. Some precautions should be taken:

• Remove the nut & ferrules from the fitting.• It is important that the fitting threads and sealing

surfaces be protected from weld splatter.• A heat sink should be used to dissipate heat.• Ensure alignment by track welding symmetrically.• Once welded, remove the weld splatter protection and reassemble nut & ferrules on fitting.

SAFETY GUIDELINES• Never connect, disconnect or remake a fitting with

pressure in the system• Make sure all fittings are properly installed, reference

Installation Instructions - page 56, before pressurizingthe system.

• Tubing material should be softer than fitting material• Tylok recommends using only Tylok replacement parts• Although the fittings will hold to the pressure rating

of the tubing, it is not recommended to go beyondthis rating. Elongation could occur in the tubing,shrinking the wall thickness and causing potentialharm to anyone in the area.

• Always use proper thread lubricants and sealants ontapered pipe threads.

• If process fluids are toxic and/or hazardous, exerciseextra caution

• Never bleed a system by loosening a fitting• For proper sealing it is recommended that the tubing

and fitting be of like material

Suggested Maximum Operating Pressures for Pipe Threads (psig)

Copper

100 38 1.00 150 66 0.85 200 93 0.80 250 121 0.80

300 149 0.78350 177 0.66400 204 0.50

Carbon Steel 316 SS

200 93 0.95 1.00 1.00300 149 0.90 1.00 1.00400 204 0.87* 0.93 0.96500 260 0.87 0.89600 316 0.82 0.85700 371 0.8 0.81800 427 0.76 0.79900 482 0.73 0.771000 538 0.69 0.76

NPT Size Brass 316 SS & Carbon Steel Male Female Male Female

1/16” 11000 55006700 33001/8” 10000 50006500 32001/4” 8000 40006600 33003/8” 7800 39005300 26001/2” 7700 38004900 24003/4” 7300 36004600 2300

1” 5300 26004400 2200

Tylok Instrumentation Fittings are rated at the following temperatures:

316 Stainless

Brass

Steel

-325°F to 1000°F(-198°C to 648°C)

-40°F to 400°F(-40°C to 204°C)

-65°F to 375°F(-54°C to 190°C)

TECHNICAL DATA

59

PIPE THREAD SPECIFICATIONSTylok Pipe Fittings are manufactured from materials meeting applicable ASTM or ASME specifications, with pipe threads which meet or exceed ANSI B1.20.1 requirements. Strict quality control procedures are followed throughout production to provide the finest possible product.

Materials: Brass • 316 Stainless Steel • Steel

These charts are to be used as a guide only and are based on normal wall thicknesses, used for the various sizes. These ratings may vary widely from effects such as the proper use of sealants, size of stock, temperature, corrosion factors, etc. Therefore, Tylok International, Inc. assumes no responsibility for its accuracy in any individual design.

Pressure ratings for Tylok tube fittings that have differing end connection styles shall use the lowest of the pressure rating.

TUBE PRESSURE DERATING FACTORSELEVATED TEMPERATURESThe table lists de-rating factors that must be considered in applications above that of ambient temperatures.

Example:Type 316 Stainless Steel 1/4” O.D.x.0.49” wall at 800°F is 7,500 PSI x .79 = 5,925 psig.

Therefore, the suggested allowable working pressure for 316 Stainless Steel (1/4” O.D. with .049” tube wall) at 800°F is 5,925 psig.

PART NUMBER TUBE SIZE1-DPST 1/16”2-DPST 1/8”3-DPST 3/16”4-DPST 1/4”5-DPST 5/16”6-DPST 3/8”8-DPST 1/2”10-DPST 5/8”12-DPST 3/4”14-DPST 7/8”16-DPST 1”

Place Pre-Set Tool in a vice and tighten nut have swaged into the tubing. Now take tubing to installation area.

60

MATERIAL SPECIFICATIONSPre-setting Tool

HEAT TRACEABILITYTylok® Tube Fittings are completely heat code traceable back to the original mill heat from which they were made. Starting with the original billet, the mill creates a certificate that completely describes the chemical & physical makeup. For any one of the four components (body, front ferrule, rear ferrule, nut), the material certifications can be provided. Call Tylok and provided the heat code stamp marked on the part itself, along the part number to obtain the certificate.

TYLOK PRE-SET TOOLThe CBC-Lok®/CS-lok® product line offers a Pre-Set Tool when fittings need to be installed in hard to reach places. The Pre-Set Tool is designed to be used in any tabletop vise. After tightening the nut the specified number of turns, as stated in the included installation instructions, loosen the nut from the Pre-Set Tool. Once the ferrules have swaged into the tubing surface, the assembly is ready for installation. When ordering the CBC-Lok®/CS-Lok® Pre-Set Tool, reference the part number in the chart. The Pre-Set Tool s is hardened for maximum durability. The Pre-Set Tool can be used repeatedly to set the ferrules onto the tubing for easy installation.

*Reference Tubing Selection & Preparation

FITTING BARMATERIAL STOCK

FORGINGTUBING

SPECIFICATION*

ASTM B16 Alloy 360 ASTM B75Brass ASTM B453 Alloy 345

ASTM B124 Alloy 377 Copper(Temper O)

Stainless ASTM A276 ASME SA-182 ASTM A213Steel ASME SA479 Type 316-SS ASTM A269

Type 316-SS

Steel ASTM A108 ASTM A179

RAW MATERIAL SPECIFICATIONS

TUBINGMATERIAL

GENERAL APPLICATIONS

Carbon Steel Air Lines, High Pressure, High Temperature, Oil, Air, Specialty Chemicals, Hydraulic Gases

Copper Low Temperature, Low Pressure Water, Oil, Air, Pneumatic Controls, Lube Lines

Stainless SteelHigh Pressure, High Temperature, Nitrogen, Helium,

Flammable Gases, Hydraulic, Gases, generally corrosive media

1 1/16 0.342 1/8 0.523 3/16 0.544 1/4 0.615 5/16 0.656 3/8 0.678 1/2 0.9010 5/8 0.9612 3/4 0.9614 7/8 1.0216 1 1.24


TUBEINSERTION

TUBE INSERTION CHARTApplications

61

TUBE INSERTION CHARTFor pre-cutting tubing to length, the following chart shows the additional length inside the fitting assembly.

TUBING-GENERAL APPLICATIONSTylok Tube Fittings are designed to perform in a variety of applications that demand high performance. The CBC-Lok® & CS-Lok® product lines have been engineered to provide optimal performance. However, tubing should always be considered as an important factor in the design stages of any system. Below is a table that describes some general uses for different types of materials. The table is provided as an reference to the Engineer in the design process. Tylok suggests the use of seamless, fully annealed tubing. Welded tubing may be used with Tylok fittings. However, due to the manufacturing of welded tubing, variables may be encountered. The media flowing through the tubing must be compatible with the tubing itself. It is always a good rule to use like tubing material on like fitting material. If this format is not followed, the ferrules may have difficulty penetrating the tubing, adversely affecting the sealing ability addition, dissimilar materials in contact may be sensitive to galvanic corrosion. Tylok recommends ordering tubing material to meet ASTM specifications to ensure that it will be dimensionally, physically, and chemically within precise limits.(See Raw Materials Specifications charts on page 60).

NOTICEIn designing a system incorporating tube fittings and valves, it is the designer’s or user’s obligation & responsibility to determine the appropriate fittings and valves to be used for each application and to insure proper installation and maintenance.

LIMITED WARRANTYTylok Fittings and Valves are warranted solely against defects in material & workmanship in the performance of the specific functions for which they are designed, as set forth in the published specifications for the life of the product. Should any fitting & valve or its component fail due to a defect in material or workmanship, Tylok will replace said fitting & valve without charge upon return of the failed part and evidence of its failure being due to materials or workmanship.

The Warranty above set forth is the only warranty applicable to Tylok products, and is in lieu of any and all other warranties either expressed or implied, including any warranty of merchantability or fitness. Tylok’s sole responsibility or liability as a result of any loss or damage due to failure shall be to replace the failed part or fitting & valve, and it shall bear no liability for any incidental or consequential damages to person or property.

62

PRODUCTSLeak Detector

Container Pull OutPart Number Size Tube Length

LEAK DETECTOR-8oz 12 inch (30.48cm)LEAK DETECTOR-Gal 1 Gallon

LEAK DETECTOR COOL-8oz 12 inch (30.48cm) LEAK DETECTOR COOL-Gal 1 Gallon

8 fl oz. (236ml)

8 fl oz. (236ml)

Tylok Liquid Leak Detectors• Tylok Liquid Leak Detector detect gas leaks in

hard-to-reach areas.• Safe for oxygen systems• Sustainable bubble action works even on very small leaks and vertical surfaces• Flexible tube extends for hard-to-reach areas• Formulas dries clean, without staining

TYLUBE™ THREAD LUBRICANT

Tylube™ is an anti-gall compound to be used on stainless steel, steel and nickel-based alloys. Temperature range to 500°F. Not recommended for plastic and aluminum products.

Tylube™ is made from distilled water with inert ingredients and contains no silicones, heavy metals, chlorine or sulfur. Safe for oxygen applications.

For a complete list of ingredients, request an MSDS to be sure of its compatibility with your installation. Available in 8 oz. plastic bottles.

TYLOK LIQUID LEAK DETECTOR

• Temperature rating: Can be used over a temperature rangeof 27° to 200°F (-2 to 93°C).

Specifications: Meets the performance requirements of:

• MIL-PRF-25567 Leak Detector Compound, Oxygen Systems,Type l, 1 to 70°C (33 to 158°F)

•NFPA 52 Section 6-12.2 Leak Testing Compressed NaturalGas Vehicular Fuel System

• EPA Part 60, Appendix A, Method 21, Section 4.3.3Alternative Screening Procedures Using Soap Solutions

• Nontoxic, noncorrosive, nonflammable

TYLOK LOW TEMPERATURE LIQUID LEAK DETECTOR

• Temperature rating: Can be used over a temperature range of -65° to200°F (-54 to 93°C).

Specifications: Meets the performance requirements of:

• MIL-PRF-25567 Leak Detector Compound, Oxygen Systems, Type ll,-54° to 1°C (-65 to 33°F)

• NFPA 52 Section 6-12.2 Leak Testing Compressed Natural Gas VehicularFuel System

• EPA Part 60, Appendix A, Method 21, Section 4.3.3Alternative Screening Procedures Using Soap Solutions

• Noncorrosive, nonflammable

Dielectric Fitting

63

Tylok Dielectric Fittings are insulated connections used to protect sensitive electrical components from electrical current potentially carried through tubing systems.

Typical Application - Gas Transmission

A typical application for a dielectric fitting is in the transmission of natural gas. The dielectric fitting insulates electric current flow that results from Current Cathodic Protection systems, static electricity, ground currents, stray currents from instruments, etc.

Features

• Dielectric Strength x107 Ohms at 10 VDC• Voltage Breakdown resistance 4000 VDC• Blow-out Proof Stem• Stainless Steel Construction• PEEK Insulators• Over-torque Prevention Ring• Pressure Rating:

- 5000 psi (344 bar) at 100°F (37°C)• Temperature Rating:

-40°F (-40°C) to 200°F (93°C)• Size Range

- 3/8”, 1/4”, 1/2”• End Connections

- Tylok Tube End straight or elbow- Male NPT straight or elbow- Female NPT straight or elbow

1st Connection: See table for size & Configuration

Aluminum Over-Torque Prevention Ring

PEEK Fitting Insulator

PEEK Nut Insulator

3/8” Stainless Steel Dielectric Adapter

2nd Connection: See table for size & Configuration

Configuration shown above: SS-6-DMC-4-DE

End Connection

Inlet / Outlet Tube Size

Pipe Size

Ordering NumberA B C E F Fx G

Dimensions, Inches

CBC-Lok

CBC-Lok / Male NPT

CS-Lok

CS-Lok / Male NPT

1/4”

3/8”

1/2”

1/4”

3/8”

3/8”

1/2”

1/4”

3/8”

1/2”

1/4”

3/8”

3/8”

1/2”

-

-

-

1/4”

1/4”

3/8”

3/8”

-

-

-

1/4”

1/4”

3/8”

3/8”

SS-4-DU-4-DE

SS-6-DU-6-DE

SS-8-DU-8-DE

SS-4-DMC-4-DE

SS-6-DMC-4-DE

SS-6-DMC-6-DE

SS-8-DMC-6-DE

SS-4-SU-4-DE

SS-6-SU-6-DE

SS-8-SU-8-DE

SS-4-SMC-4-DE

SS-6-SMC-4-DE

SS-6-SMC-6-DE

SS-8-SMC-6-DE

4.02

4.14

4.38

3.93

3.99

3.99

4.09

4.02

4.09

4.38

3.93

3.99

3.99

4.09

2.80

2.80

2.58

0.61

0.67

0.90

2.80

2.80

2.58

0.61

0.67

0.90

N/A N/A

N/A N/A

0.28 0.81 0.69

0.56

0.69

0.88

0.56

0.69

0.69

0.88

0.56

0.69

0.88

0.56

0.69

0.69

0.88

64

Dielectric Fitting

Material1st

Connection SizeFitting

Configuration2nd

Connection SizeDielectric Identifier Description

SS-4 = 1/4”6 = 3/8”8 = 1/2”

-DU--DRU--DRU-

4 = 1/4”6 = 3/8”8 = 1/2”

-DE Tylok Tube End Straight

SS- 4, 6, 8 -DELU- 4, 6, 8 -DE Tube End Elbow

SS- 4, 6, 8 -DMC- 4, 6, 8 -DE MNPT Straight

SS- 4, 6, 8 -DME- 4, 6, 8 -DE MNPT Elbow

SS- 4, 6, 8 -DFC- 4, 6, 8 -DE FNPT Straight

SS- 4, 6, 8 -DFE- 4, 6, 8 -DE FNPT Elbow

Ordering Information

For Single Ferrule, CS-Lok, change the “D” in the configuration section to “S”

Combined Catalog_Website... · DATANF SATANF Adapter Tube to AN Flare 9 DATPF SATPF Adapter Tube to...

Documents

Transcript of Combined Catalog_Website... · DATANF SATANF Adapter Tube to AN Flare 9 DATPF SATPF Adapter Tube to...