Combination crusher

China Mining Machinery Production and Export Base Address: No.8 Tanxiang Road, Zhengzhou, Henan, China

Tel: +86-371-67833161 / 67833171E-mail: [email protected] [email protected]: [email protected]: http://www.hxjqchina.com

Introduction to Compound Crusher

Combination crusher is also referred to as compound crusher, which is a new fine and coarse crushingproduct that combines domestic and foreign similar crushing technology and optimizes main technicalparameters. It is mainly used in the medium cement plant for crushing cement raw material and cementclinker, which provides ideal fine crushing equipment for the cement plant to do technical transformationor build a new cement production line.Combination crusher is mainly composed of gearing, spindle, barrel, upper cover, base and othercomponents.

The Characteristics of Compound Crusher

mailto:[email protected]

http://www.hxjqchina.com



1. The machine has the features of big reduction ratio and adjustable discharging size. It doesn't affect byhammer board and liner wearing;2. No grizzly bar setting, high crushing moisture content, thus the large silt content materials is not easyto plug.3. Adopting elastic adjusting mechanism, the materials that can't be crushed can automatic discharge anddon't damage the equipment4. Horizontal bearing arrangement, long service life, and can crush high temperature material (such ascement clinker).5. The rotor block of the compound crusher is uniquely designed. When crushing materials, the rotorblock is hardly worn. The back cavity is provided with a screw or hydraulic opening mechanism, and it'seasy to replace the wearing parts without opening the master device.

The Illustration of the Working Principle





The materials vertically falls into the high speed ration impeller through the upper combination crusher,under the impact of high-speed centrifugal force and together with another part shunting in the umbrellaform around the impeller, and thus producing impact and crushing. After the materials being collided witheach other, they will be crushed by multi-colliding and friction between the impeller and casing in theform of material vortex, the materials will be straightly discharged through the bottom, forming a closedmultiple cycles for the purpose of achieving the required finished size that controlled by the screeningequipment.Henan Hongxing Mining Machinery is a professional manufacturer that specializes in compound crusherand compound cone crusher. We can optimize the main technical parameters of the equipment accordingto the customers' requirements and the actual condition. This machine has absorbed the advantages ofboth the impact crusher and hammer crusher, which is the preferred equipment of the crushing productionline and sand making production line.

Combination Crusher Technical Parameters





Model 800 1000 1250 1500 1750

Rotor diameter (mm) 650 800 1000 1250 1560

Cylinder height(mm) 800 850 850 1000 1410

Main shaft rotation speed

(r/min)1350 970 740 650 600

Feeding size(mm) 50 70 100 100 100

Discharging size (mm) 0-5 0-5 0-5 0-5 0-5

Processing capacity (t/h) 5-15 10-30 20-60 30-80 40-100

Motor

Power(kw) 30 55 75 110 132

Rotation

speed1440 1440 750 750 750

Dimensions(L×W×H)(mm) 2200×860×1980 2700×1160×2000 2800×1400×2730 3100×1900×2300 3350×2100×2800

Total weight (t) 2.3 4.5 9.73 18.1 26.61



Combination crusher

Marketing

Transcript of Combination crusher