Combination Assemblies AW-4 Glazing Performance...
Transcript of Combination Assemblies AW-4 Glazing Performance...
Architect Series® Traditional
AW-1Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
Product Selection Guide
Size and Performance Data .....................................................................................................................................AW-2
Sound Transmission Class/Outdoor-Indoor Transmission Class ........................................................................AW-2
Features and Options ..............................................................................................................................................AW-3
Combination Assemblies .............................................................................................................................. AW-4
Glazing Performance ..................................................................................................................................... AW-5
HurricaneShield® Products with Impact-Resistant Glass .......................................................................AW-10
Grille Types
Grille Profiles .......................................................................................................................................................... AW-11
Typical Grille Patterns ............................................................................................................................................ AW-12
Size Tables
Awning—Clad and Wood ...................................................................................................................................... AW-13
Large Awning—Clad and Wood ........................................................................................................................... AW-14
Design Data—Clad and Wood
Awning—Clad and Wood ...................................................................................................................................... AW-15
Large Awning—Clad and Wood ........................................................................................................................... AW-16
Detailed Product Descriptions
Clad ......................................................................................................................................................................... AW-17
Wood ...................................................................................................................................................................... AW-18
Unit Sections
Wood Collection ................................................................................................................................................... AW-19
Clad ......................................................................................................................................................................... AW-20
Wood ...................................................................................................................................................................... AW-21
Large Awning—Clad .............................................................................................................................................. AW-22
Large Awning—Wood ............................................................................................................................................ AW-24
The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.
Architect Series® Traditional
AW-2Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
PRODUCT SELECTION GUIDE
Size and Performance Data
Sound Transmission Class / OITC
(—) = Not Available
(1) Maximum performance for single unit when glazed with the appropriate glass thickness. See Design Data pages in this section for specific product performance class and grade values. Values shown are for standard and special sizes; Custom sizes may not have the same values. Contact your local sales representative for complete information.
(2) The higher the level, the greater the product’s ability to resist forced entry.
(3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration.
(4) Glazing configurations may result in higher operational forces.
NOTE: Performance with additional options may not be the same as Standard and Special size units. Please contact your local Pella representative for complete information.
Awning Clad Wood
SIZESStandard vent / fixed sizes l l
Special sizes available l l
PERFORMANCE 1
Meets or Exceeds AAMA / WDMA Ratings CW40 - CW50
Hallmark Certified
CW40 - CW50Hallmark Certified
Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05
Water Resistance 7.5 psf 7.5 psf
Design Pressure 50 psf 50 psf
HurricaneShield® Products with Impact-Resistant GlassCW75
Hallmark Certified–
OTHER PERFORMANCE CRITERIA
Forced Entry Resistance Level (Minimum Security Grade) 2 10 10
Large AwningSIZESStandard Vent Sizes l l
Special Sizes Available l l
PERFORMANCE 1
Meets or Exceeds AAMA / WDMA Ratings LC40
Hallmark Certified
CW40Hallmark Certified
Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05
Water Resistance 7.5 psf 7.5 psf
Design Pressure 40 psf 40 psf
OTHER PERFORMANCE CRITERIAForced Entry Resistance Level (Minimum Security Grade) 2 10 10
Operating Force (lb) Initiate Motion / Maintain Motion (of Hallmark tested size and glazing) 4 15 / 6 15 / 6
SOUND TRANSMISSION CLASS / OUTDOOR-INDOOR TRANSMISSION CLASS
Product Frame Size Tested 3
Glazing SystemSTC
RatingOITC
RatingOverall Glazing
Thickness
Exterior Glass
Thickness
Interior Glass
Thickness
Third Pane Thickness
ARCHITECT SERIES TRADITIONAL CLAD
WINDOW
VENT WITH INTEGRAL GRILLES53" x 29" 11/16" 2.5mm 2.5mm — 27 24
VENT WITH REMOVABLE OR NO GRILLES53" x 29" 11/16" 2.5mm 2.5mm — 27 2359" x 23" 11/16" 3mm 5mm — 33 2759" x 23" 11/16" 3mm 6.0mm PVB — 33 28
FIXED WITH INTEGRAL GRILLES47" x 59" 11/16" 3mm 3mm — 30 27
FIXED WITH REMOVABLE OR NO GRILLES47" x 59" 11/16" 3mm 3mm — 29 2447" x 59" 11/16" 3mm 5mm — 32 2747" x 59" 11/16" 3mm 6.0mm PVB — 32 28
ARCHITECT SERIES TRADITIONAL CLAD
WINDOW WITH HURRICANSHIELD
IMPACT-RESISTANT GLASS
VENT WITH REMOVABLE OR NO GRILLES59" x 23" 11/16" 3mm 7.6mm PVB — 35 3053" x 29" 1" 5mm 10.1mm SGP — 35 3053" x 29" 1" 5mm 10.1mm PVB — 34 30
FIXED WITH REMOVABLE OR NO GRILLES47" x 59" 11/16" 3mm 7.6mm PVB — 33 2953" x 53" 1" 5mm 10.1mm SGP — 35 3047" x 59" 1" 5mm 10.1mm PVB — 33 30
Rev. 04/09/2018
Architect Series® Traditional
AW-3Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
PRODUCT SELECTION GUIDE
Features and Options
(1) Contact your local Pella sales representative for current designs and color options. (2) Only available with Triple-Pane glazing, not available with high altitude glazing. (3) Available with Low-E argon-insulated glass only.
(4) Not available on Mahogany and Douglas Fir interiors. (5) Unit height determines availability.
Standard OPTIONS / UPGRADES
GLAZING
Glazing Type
Dual-Pane Insulating Glass Triple-Pane Insulating Glass
Insulated Glass Options/Low-E Types
Advanced Low-E
SunDefense™ Low-E
AdvancedComfort Low-E
NaturalSun Low-E
Clear (no Low-E coating)
Additional Glass Options
Annealed Glass
Tempered Glass
Obscure Glass 1Low-E Tinted Glass (Bronze, Gray and Green)
Non-Impact Laminated Dual-Pane Insulating GlassHurricaneShield® Products with Impact-Resistant Glass (Laminated Dual-Pane Insulating Glass)
Gas Fi l l/High Alt i tude
Argon
Krypton 2High altitude
High Altitude with Argon 3
WOOD TYPES
Pine Mahogany, Douglas Fir
EXTERIOR
EnduraClad® protective finish
EnduraClad Plus protective finish
Factory Primed Pine wood exterior
Unfinished Mahogany wood exterior
Cladding Colors 127 Standard colors Custom Colors
INTERIOR
Unfinished Wood Factory primed 4 , Factory prefinished paint 4 , Factory prefinished stain
HARDWARE
Hardware Finish
Champagne, White, Brown or Matte BlackBright Brass, Satin Nickel, Oil-Rubbed Bronze, Antique Brass, Distressed Bronze, Distressed Nickel
Sash Locks
SureLock® System, Unison Lock System 5 —
Hinging
Awning—Stainless Steel —
Large Awning—Wash Hinge —
Impact-Resistant—Wash Hinge —
GRILLES
Integral Light Technology® Gri l les
— Traditional, Prairie, Top Row, Cross, New England, Victorian, Simulated French, Custom
Roomside Removable Gri l les
— Traditional, Prairie, Top Row, Cross, New England, Victorian, Custom
Gril les-Between-the-Glass
— Traditional, Prairie, Top Row 1, Cross or Custom-Equally Divided
SCREENS
— InView™ screens, Vivid View® screens
Rev. 03/26/2018
Architect Series® Traditional
AW-4Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
COMBINATION ASSEMBLIES
See the Installation and Performance section at www.PellaADM.com for standard size range charts.
Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion.
Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Go to www.PellaADM.com for typical combinations and requirements and limitations related to mulling various combinations.
Contact your local Pella sales representative for more information.
• Combination Recommendations Downloadable PDF.
• Combination Size Tables Downloadable PDF.
Click to view Clad-Wood Combinations Sections
Architect Series® Traditional
AW-5Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GLAZING PERFORMANCE - TOTAL UNIT
Aluminum-Clad Exterior
Vent Awning and Large Awning
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Gla
zing
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1 Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
VENT UNITS N NC SC S 1 2 311/16" Clear IG PEL-N-30-13234-00001 3 3 air 0.45 0.53 0.56 44
with grilles-between-the-glass PEL-N-30-13431-00001 0.44 0.49 0.51 44
with integral grilles PEL-N-30-13438-00001 0.44 0.49 0.51 44
11/16" Advanced Low-E IG PEL-N-30-13229-00002 3 3 argon 0.28 0.26 0.48 61 20
with grilles-between-the-glass PEL-N-30-13423-00002 0.28 0.23 0.43 61 18
with integral grilles PEL-N-30-13426-00002 0.29 0.23 0.43 61
11/16" SunDefense™ Low-E IG PEL-N-30-13230-00002 3 3 argon 0.28 0.19 0.44 61 16
with grilles-between-the-glass PEL-N-30-13424-00002 0.28 0.18 0.40 61
with integral grilles PEL-N-30-13427-00002 0.28 0.18 0.40 61
11/16" AdvancedComfort Low-E IG PEL-N-30-13233-00001 3 3 argon 0.25 0.25 0.47 47 23
with grilles-between-the-glass PEL-N-30-13430-00001 0.25 0.23 0.42 47 22
with integral grilles PEL-N-30-13437-00001 0.27 0.23 0.42 47 20
11/16" NaturalSun Low-E IG PEL-N-30-13231-00002 3 3 argon 0.29 0.47 0.54 61 31
with grilles-between-the-glass PEL-N-30-13425-00002 0.29 0.43 0.49 60 28
with integral grilles PEL-N-30-13428-00002 0.29 0.43 0.49 60 28
TINTED GLAZING11/16" Bronze Advanced Low-E IG PEL-N-30-13271-00001 5 3 argon 0.29 0.23 0.31 59
with grilles-between-the-glass PEL-N-30-13507-00001 0.30 0.21 0.28 59
with integral grilles PEL-N-30-13513-00001 0.30 0.21 0.28 59
11/16" Gray Advanced Low-E IG PEL-N-30-13272-00001 5 3 argon 0.29 0.21 0.26 59
with grilles-between-the-glass PEL-N-30-13508-00001 0.30 0.19 0.24 59
with integral grilles PEL-N-30-13514-00001 0.30 0.19 0.24 59
11/16" Green Advanced Low-E IG PEL-N-30-13273-00001 5 3 argon 0.29 0.26 0.42 59
with grilles-between-the-glass PEL-N-30-13509-00001 0.30 0.24 0.38 59
with integral grilles PEL-N-30-13515-00001 0.30 0.24 0.38 59
HIGH ALTITUDE GLAZING11/16" Advanced Low-E IG PEL-N-30-13235-00001 3 3 air 0.32 0.26 0.48 55
with grilles-between-the-glass PEL-N-30-13432-00001 0.32 0.24 0.43 55
with integral grilles PEL-N-30-13439-00001 0.32 0.24 0.43 55
11/16" SunDefense Low-E IG PEL-N-30-13236-00001 3 3 air 0.31 0.20 0.44 56
with grilles-between-the-glass PEL-N-30-13433-00001 0.32 0.18 0.40 56
with integral grilles PEL-N-30-13440-00001 0.32 0.18 0.40 56
11/16" AdvancedComfort Low-E IG PEL-N-30-13238-00001 3 3 air 0.28 0.25 0.47 43 19
with grilles-between-the-glass PEL-N-30-13435-00001 0.28 0.23 0.42 43 18
with integral grilles PEL-N-30-13442-00001 0.29 0.23 0.42 43
11/16" NaturalSun Low-E IG PEL-N-30-13237-00001 3 3 air 0.32 0.47 0.54 55 27
with grilles-between-the-glass PEL-N-30-13434-00001 0.33 0.43 0.49 55
with integral grilles PEL-N-30-13441-00001 0.33 0.43 0.49 55
Architect Series® Traditional
AW-6Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GLAZING PERFORMANCE - TOTAL UNITAluminum-Clad ExteriorVent Awning and Large Awning Triple-Pane Glass
Gla
zing
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1 Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
Ext. Mid Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
VENT N NC SC S 1 2 31" Advanced Low-E IG PEL-N-30-13314-00001 3 3 3 argon 0.22 0.23 0.42 71 26
with grilles-between-the-glass PEL-N-30-13592-00001 0.22 0.21 0.38 72 25
with integral grilles PEL-N-30-13601-00001 0.22 0.21 0.38 72 25
1" Advanced Low-E IG PEL-N-30-13320-00001 3 3 3 Krypton 0.19 0.23 0.42 75 29
with grilles-between-the-glass PEL-N-30-13598-00001 0.19 0.21 0.38 75 28
with integral grilles PEL-N-30-13607-00001 0.19 0.21 0.38 75 28
1" SunDefense™ Low-E IG PEL-N-30-13315-00001 3 3 3 argon 0.22 0.17 0.39 72 23
with grilles-between-the-glass PEL-N-30-13593-00001 0.22 0.16 0.35 72 22
with integral grilles PEL-N-30-13602-00001 0.22 0.16 0.35 72 22
1" SunDefense™ Low-E IG PEL-N-30-13321-00001 3 3 3 Krypton 0.19 0.17 0.39 75 26
with grilles-between-the-glass PEL-N-30-13599-00001 0.19 0.16 0.35 75 25
with integral grilles PEL-N-30-13608-00001 0.19 0.16 0.35 75 25
1" NaturalSun Low-E IG PEL-N-30-13313-00001 3 3 3 argon 0.22 0.39 0.47 71 34
with grilles-between-the-glass PEL-N-30-13591-00001 0.22 0.35 0.43 71 31
with integral grilles PEL-N-30-13600-00001 0.22 0.35 0.43 71 31
1" NaturalSun Low-E IG PEL-N-30-13319-00001 3 3 3 Krypton 0.19 0.39 0.47 75 39
with grilles-between-the-glass PEL-N-30-13597-00001 0.19 0.35 0.43 75 35
with integral grilles PEL-N-30-13606-00001 0.19 0.35 0.43 75 35
HIGH ALTITUDE GLAZING1" Advanced Low-E IG PEL-N-30-13317-00001 3 3 3 air 0.25 0.23 0.42 67 23
with grilles-between-the-glass PEL-N-30-13595-00001 0.25 0.21 0.38 67 20
with integral grilles PEL-N-30-13604-00001 0.25 0.21 0.38 67 20
1" SunDefense Low-E IG PEL-N-30-13318-00001 3 3 3 air 0.25 0.18 0.39 67 19
with grilles-between-the-glass PEL-N-30-13596-00001 0.25 0.16 0.35 67 17
with integral grilles PEL-N-30-13605-00001 0.25 0.16 0.35 67 17
1" NaturalSun Low-E IG PEL-N-30-13316-00001 3 3 3 air 0.26 0.39 0.47 67 30
with grilles-between-the-glass PEL-N-30-13594-00001 0.26 0.35 0.43 67 28
with integral grilles PEL-N-30-13603-00001 0.26 0.35 0.43 67 28
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Architect Series® Traditional
AW-7Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GLAZING PERFORMANCE - TOTAL UNITWood ExteriorVent Awning and Large Awning
Gla
zing
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1 Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
VENT N NC SC S 1 2 311/16" Clear IG PEL-N-40-07620-00001 3 3 air 0.43 0.54 0.56 44
with integral grilles PEL-N-40-07824-00001 0.43 0.49 0.51 44
11/16" Advanced Low-E IG PEL-N-40-07615-00002 3 3 argon 0.27 0.26 0.48 61 21
with integral grilles PEL-N-40-07812-00002 0.27 0.24 0.43 61 20
11/16" SunDefense™ Low-E IG PEL-N-40-07616-00002 3 3 argon 0.26 0.19 0.44 61 18
with integral grilles PEL-N-40-07813-00002 0.27 0.18 0.4 61 17
11/16" AdvancedComfort Low-E IG PEL-N-40-07619-00001 3 3 argon 0.24 0.25 0.47 48 24
with integral grilles PEL-N-40-07823-00001 0.25 0.23 0.42 47 23
11/16" NaturalSun Low-E IG PEL-N-40-07617-00002 3 3 argon 0.28 0.47 0.54 61 32
with integral grilles PEL-N-40-07814-00002 0.28 0.43 0.49 61 30
TINTED GLAZING11/16" Bronze Advanced Low-E IG PEL-N-40-07657-00001 5 3 argon 0.28 0.23 0.31 59 20
with integral grilles PEL-N-40-07899-00001 0.29 0.21 0.28 59
11/16" Gray Advanced Low-E IG PEL-N-40-07658-00001 5 3 argon 0.28 0.21 0.27 59 18
with integral grilles PEL-N-40-07900-00001 0.29 0.19 0.24 59
11/16" Green Advanced Low-E IG PEL-N-40-07659-00001 5 3 argon 0.28 0.26 0.42 59 21
with integral grilles PEL-N-40-07901-00001 0.29 0.24 0.38 59
HIGH ALTITUDE GLAZING11/16" Advanced Low-E IG PEL-N-40-07621-00001 3 3 air 0.30 0.26 0.48 56
with integral grilles PEL-N-40-07825-00001 0.31 0.24 0.43 56
11/16" SunDefense Low-E IG PEL-N-40-07622-00001 3 3 air 0.30 0.20 0.44 56 with integral grilles PEL-N-40-07826-00001 0.31 0.18 0.4 56
11/16" AdvancedComfort Low-E IG PEL-N-40-07624-00001 3 3 air 0.27 0.25 0.47 43 22
with integral grilles PEL-N-40-07828-00001 0.28 0.23 0.42 43 21
11/16" NaturalSun Low-E IG PEL-N-40-07623-00001 3 3 air 0.31 0.47 0.54 56 28
with integral grilles PEL-N-40-07827-00001 0.32 0.43 0.49 56 26
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Architect Series® Traditional
AW-8Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GLAZING PERFORMANCE - TOTAL UNIT
Wood Exterior
Vent Awning and Large Awning Triple-Pane Glass
Gla
zing
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1 Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
Ext. Mid Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
VENT N NC SC S 1 2 31" Advanced Low-E IG PEL-N-40-07700-00001 3 3 3 argon 0.21 0.23 0.42 72 27
with grilles-between-the-glass PEL-N-40-07978-00001 0.21 0.21 0.38 72 26
with integral grilles PEL-N-40-07987-00001 0.21 0.21 0.38 72 26
1" Advanced Low-E IG PEL-N-40-07706-00001 3 3 3 Krypton 0.17 0.23 0.42 76 31
with grilles-between-the-glass PEL-N-40-07984-00001 0.18 0.21 0.38 76 30
with integral grilles PEL-N-40-07993-00001 0.18 0.21 0.38 76 30
1" SunDefense™ Low-E IG PEL-N-40-07701-00001 3 3 3 argon 0.21 0.17 0.39 72 24
with grilles-between-the-glass PEL-N-40-07979-00001 0.21 0.16 0.35 72 23
with integral grilles PEL-N-40-07988-00001 0.21 0.16 0.35 72 23
1" SunDefense™ Low-E IG PEL-N-40-07707-00001 3 3 3 Krypton 0.17 0.17 0.39 77 27
with grilles-between-the-glass PEL-N-40-07985-00001 0.17 0.16 0.35 77 27
with integral grilles PEL-N-40-07994-00001 0.17 0.16 0.35 77 27
1" NaturalSun Low-E IG PEL-N-40-07699-00001 3 3 3 argon 0.21 0.39 0.48 71 36
with grilles-between-the-glass PEL-N-40-07977-00001 0.21 0.35 0.43 71 34
with integral grilles PEL-N-40-07986-00001 0.21 0.35 0.43 71 34
1" NaturalSun Low-E IG PEL-N-40-07705-00001 3 3 3 Krypton 0.18 0.39 0.48 76 40
with grilles-between-the-glass PEL-N-40-07983-00001 0.18 0.35 0.43 76 38
with integral grilles PEL-N-40-07992-00001 0.18 0.35 0.43 76 38
HIGH ALTITUDE GLAZING1" Advanced Low-E IG PEL-N-40-07703-00001 3 3 3 air 0.24 0.24 0.42 67 23
with grilles-between-the-glass PEL-N-40-07981-00001 0.24 0.22 0.38 67 22
with integral grilles PEL-N-40-07990-00001 0.24 0.22 0.38 67 22
1" SunDefense Low-E IG PEL-N-40-07704-00001 3 3 3 air 0.24 0.18 0.39 68 20
with grilles-between-the-glass PEL-N-40-07982-00001 0.24 0.16 0.35 68 19
with integral grilles PEL-N-40-07991-00001 0.24 0.16 0.35 68 19
1" NaturalSun Low-E IG PEL-N-40-07702-00001 3 3 3 air 0.24 0.39 0.48 67 33
with grilles-between-the-glass PEL-N-40-07980-00001 0.24 0.35 0.43 67 30
with integral grilles PEL-N-40-07989-00001 0.24 0.35 0.43 67 30
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Architect Series® Traditional
AW-9Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GLAZING PERFORMANCE - TOTAL UNIT
Aluminum-Clad Exterior
HurricaneShield® Impact-Resistant Glass
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Gla
zing
Th
ickn
ess
Type of Glazing NFRC Certified Product #
Glass (mm)
Gap Fill
Performance Values 1 Shaded Areas Meet ENERGY STAR® Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
HURRICANESHIELD® LAMINATED IMPACT-RESISTANT N NC SC S 1 2 311/16" Clear PEL-N-30-13245-00001 3 8 air 0.47 0.50 0.55 44
with grilles-between-the-glass PEL-N-30-13449-00001 0.47 0.46 0.5 44
with integral grilles PEL-N-30-13461-00001 0.47 0.46 0.5 44
11/16" Advanced Low-E IG PEL-N-30-13240-00001 3 8 argon 0.33 0.26 0.47 54
with grilles-between-the-glass PEL-N-30-13444-00001 0.34 0.24 0.42 54
with integral grilles PEL-N-30-13456-00001 0.34 0.24 0.42 54
11/16" SunDefense™ Low-E IG PEL-N-30-13241-00001 3 8 argon 0.33 0.20 0.43 55
with grilles-between-the-glass PEL-N-30-13445-00001 0.34 0.18 0.39 55
with integral grilles PEL-N-30-13457-00001 0.34 0.18 0.39 55
1" Clear PEL-N-30-13377-00001 5 10 air 0.43 0.48 0.53 45
with grilles-between-the-glass PEL-N-30-13673-00001 0.43 0.44 0.48 45
with integral grilles PEL-N-30-13697-00001 0.43 0.44 0.48 45
1" Advanced Low-E IG PEL-N-30-13369-00001 5 10 argon 0.28 0.25 0.45 59 19
with grilles-between-the-glass PEL-N-30-13665-00001 0.28 0.23 0.41 59 17
with integral grilles PEL-N-30-13689-00001 0.28 0.23 0.41 59 17
1" SunDefense Low-E IG PEL-N-30-13370-00001 5 10 argon 0.27 0.19 0.42 59 16
with grilles-between-the-glass PEL-N-30-13666-00001 0.28 0.18 0.38 59
with integral grilles PEL-N-30-13690-00001 0.28 0.18 0.38 59
TINTED GLAZING LAMINATED IMPACT-RESISTANT11/16" Bronze Advanced Low-E IG PEL-N-30-13242-00001 3 8 argon 0.33 0.22 0.1 54
with grilles-between-the-glass PEL-N-30-13446-00001 0.34 0.21 0.09 54
with integral grilles PEL-N-30-13458-00001 0.34 0.21 0.09 54
1" Bronze IG PEL-N-30-13378-00001 5 10 air 0.43 0.36 0.35 45
with grilles-between-the-glass PEL-N-30-13674-00001 0.43 0.32 0.31 45
with integral grilles PEL-N-30-13698-00001 0.43 0.32 0.31 45
11/16" Gray Advanced Low-E IG PEL-N-30-13243-00001 3 8 argon 0.33 0.22 0.06 54
with grilles-between-the-glass PEL-N-30-13447-00001 0.34 0.20 0.05 54
with integral grilles PEL-N-30-13459-00001 0.34 0.20 0.05 54
1" Gray IG PEL-N-30-13379-00001 5 10 air 0.43 0.34 0.3 45
with grilles-between-the-glass PEL-N-30-13675-00001 0.43 0.31 0.27 45
with integral grilles PEL-N-30-13699-00001 0.43 0.31 0.27 45
11/16" Green Advanced Low-E IG PEL-N-30-13244-00001 3 8 argon 0.33 0.24 0.26 54
with grilles-between-the-glass PEL-N-30-13448-00001 0.34 0.22 0.24 54
with integral grilles PEL-N-30-13460-00001 0.34 0.22 0.24 54
1" Green IG PEL-N-30-13380-00001 5 10 air 0.43 0.35 0.47 45
with grilles-between-the-glass PEL-N-30-13676-00001 0.43 0.32 0.43 45
with integral grilles PEL-N-30-13700-00001 0.43 0.32 0.43 45
Rev. 03/26/2018
Architect Series® Traditional
AW-10Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HURRICANESHIELD® PRODUCTS WITH IMPACT-RESISTANT GLASS
All sizes and glass types are tested for air/water/structural and impact-resistance, and are certified for wind zone 4, large missile rating D. Florida Product Approval System number not needed if Miami-Dade County approved.
ProductDesign Pressure Large Missile Rating D
Hallmark Certified
Florida Product Approval System
Minimum Maximum
VENT UNITS
75 75 411-H-1339 FL10026.1
75 75 411-H-1339 FL10026.1
75 +75 / -85 411-H-1339 FL10026.2
LARGE FIXED UNITS
+55 / -60 +60 / -75 411-H-1339 FL10022.1
+55 / -60 +60 / -75 411-H-1339 FL10022.2
+55 / -60 +60 / -85 411-H-1339 FL10022.4
Awning HurricaneShield Downloadable PDF.
Click to view Clad-Wood HurricaneShield Section
For a complete list of ratings, refer to the Coastal and High Winds section.
Rev. 03/26/2018
Architect Series® Traditional
AW-11Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
2" ILT1 1/4" ILT7/8" ILT
Clad Exterior - Wood InteriorOgee Glaze Grilles
7/8" 1 1/4"2"
2"1 1/4"7/8"
Removable Interior Pine Grilles
2"1 1/4"
2"
RMB2" Traditional
1 1/4"
RMB1 1/4" Traditional
3/4"
RMB2" Colonial
RMB1 1/4" Colonial
RMB3/4" Traditional
5/8" ILT 1 1/4" ILT7/8" ILT5/8" ILT 1 1/4" ILT7/8" ILT
Clad Exterior - Wood Interior Putty and Ogee Glaze Grilles
7/8"
5/8" 1 1/4"7/8"
5/8" 1 1/4"
Wood Exterior - Wood Interior Putty and Ogee Glaze Grilles
7/8"
5/8" 1 1/4"7/8"
5/8" 1 1/4"
®Integral Light Technology
3/4"3/4"
Grilles-Between-the-GlassContoured Aluminum -
GBG3/4" Contoured
GBG3/4" Contoured
GRILLE TYPES
Typical Grille Profiles
Interior wood ILT grilles available in Pine, Mahogany or Douglas Fir to match complete unit.
Exterior wood ILT grilles available in Pine or Mahogany to match complete unit.
Architect Series® Traditional
AW-12Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
GRILLE TYPES
Typical Grille Patterns
VG = Visible Glass Lite dimensions noted can vary. Custom configurations are also available, for details contact your local Pella sales representative.
For traditional patterns, see size tables.
Grilles-Between-the-Glass
9-Lite 12-Lite 14-Lite
Integral Light Technology® Grilles and Roomside Removable Grilles
9-Lite 12-Lite 14-Lite
Size range availability is for 3/4", 7/8" and 1-1/4" grille width. Standard corner lite dimension for Prairie patterns = 2-1/2" VG.
9-Lite
- Available in all standard and special sizes.
12-Lite
- Available in units ≥ 1'9" and ≤ 2'11" in width, and ≥ 1'9" in height.
14-Lite
- Available in units ≥ 1'9" in width and ≥ 2'11" in height .
Cross New England Top Row Victorian
Cross Top Row
Architect Series® Traditional
AW-13Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
SIZE TABLESWood and Aluminum-Clad ExteriorsStandard Awning
3273
3271
3265
3259
3253
3247
3241
3235
3229
3225
3223
3221
3217
3573 5973537347734173
5971
5965
5959
5953
5947
5941
5935
5929
5925
5923
5921
5917
5371
5365
5359
5353
5347
5341
5335
5329
5325
5323
5321
5317
4771
4765
4759
4753
4747
4741
4735
4729
4725
4723
4721
4717
4171
4165
4159
4153
4147
4141
4135
4129
4125
4123
4121
4117
3571
3565
3559
3553
3547
3541
3535
3529
3525
3523
3521
3517
2929
2525
2323
2121
1717
4"3 /
(813)(832)
2' 8"2' 8
Vent Units
OpeningFrame
(432
)(4
51)
1' 5
"1'
51'
91'
9"
(552
)(5
33)
(584
)(6
03)
1' 1
1"1'
11
(737
)(7
56)
2' 5
"2'
5
(635
)(6
54)
2' 1
"2'
14"
3/
4"3
/4"
3/
4"3
/4"
3/
2' 52' 5"
(756)(737)(432)
(451)
1' 5"1' 5
(533)(552)
1' 9"1' 9
(584)(603)
1' 11"1' 11
(635)(654)
2' 1"2' 14"3 / 4"3 / 4"3 / 4"3 / 4"3 /Opening
Frame
(432
)(4
51)
1' 5
"1'
51'
91'
9"
(552
)(5
33)
(584
)(6
03)
1' 1
1"1'
11
(737
)(7
56)
2' 5
"2'
5
(635
)(6
54)
2' 1
"2'
14"
3/
4"3
/4"
3/
4"3
/4"
3/
(1 8
54)
(1 8
73)
6' 1
"6'
14"
3/
4"3 /
4"3
/4"
3/
4"3
/4"
3/
Vent and Fixed Units
Fixed Units5'
5"
5' 1
1"
(1 8
22)
(1 8
03)
5' 1
1
(1 6
51)
(1 6
70)
5' 5
2' 1
1"4'
5"
3' 1
1"4'
11"
3' 5
"
(1 4
99)
(1 5
18)
4' 1
14"
3/
4' 5
(1 3
46)
(1 3
65)
(1 0
41)
(1 0
60)
4"3
/
(1 1
94)
(1 2
13)
3' 1
13'
52'
11
(889
)(9
08)
4"3
/
(1 213)(1 194)
3' 113' 11"
2' 112' 11"
(889)(908)
4"3 /3' 53' 5"
(1 041)(1 060)
4"3 / 4' 5 4"3 /
4' 5"
(1 346)(1 365)
(1 499)(1 518)
4' 114' 11"
4"3 /
F
F
F
F
F
Special Size Frame Dimensions*
MAXIMUM
VENT1'1-3/4" W x 1'1-3/4" H
(350 x 350)
4'5" W x 2'5" H(1 346 x 737)
FIXED10" W x 10" H
(254 x 254)
12" W x 12" H(3 658 x 3 658)
* Available within size range shown. Contact your local Pella representative for availability of Triple-Glazing on larger custom unit sizes.
Keep frame di men sions to the near est 1/4" increment. Frame height cannot exceed frame width on special size vent units.
Not to scale.
Fixed Units only
Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles.
Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.
Opening Dimensions
CLAD EXTERIOR UNITS: Dimensions shown in tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Rev. 04/09/2018
Architect Series® Traditional
AW-14Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Large Awning
Not to scale.
Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles.
All units are available as fixed in the Casement section.
Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.
Special Size Frame Dimensions*MAXIMUM
VENT1'9" W x 1'5" H
(889 x 889)
6'1" W x 6'1" H(1 854 x 1 854)
* Available within size range shown.
Keep frame di men sions to the near est 1/4" increment.
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Rev. 03/26/2018
Architect Series® Traditional
AW-15Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
DESIGN DATA
Wood and Aluminum-Clad Exteriors
Standard Awning
Miscellaneous Formulas
VISIBLE GLASS
Width = Frame – 5-3/4"
Height = Frame – 5-3/4"
ACTUAL GLASS
Width = Frame – 4-3/8"
Height = Frame – 4-3/8"
V = Vent Only
F = Fixed Units only
(—) = Not Applicable
(1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires tempered glass.
VENT AND FIXED UNITS
UnitVent Area Ft2
Visible Glass
Ft2
Standard Glass Thickness (mm)
Performance Class & Grade 1
Dual-Pane Glazing
Triple-Pane Glazing
Ann
eale
d
Tem
per
ed
Ann
eale
d
or
Tem
per
ed
1717V 0.8 0.9 2.5 3 3 CW502121V 1.5 1.6 2.5 3 3 CW502323V 2.0 2.1 2.5 3 3 CW502525V 2.5 2.6 2.5 3 3 CW502929V 3.6 3.8 2.5 3 3 CW503217 1.8 2.1 2.5 3 3 CW503221 2.6 2.8 2.5 3 3 CW503223 3.0 3.1 2.5 3 3 CW503225 3.3 3.5 2.5 3 3 CW503229 4.1 4.2 2.5 3 3 CW503517 2.0 2.3 2.5 3 3 CW503521 2.9 3.1 2.5 3 3 CW503523 3.3 3.5 2.5 3 3 CW503525 3.7 3.9 2.5 3 3 CW503529 4.5 4.7 2.5 3 3 CW504117 2.4 2.8 2.5 3 3 CW504121 3.4 3.7 2.5 3 3 CW504123 3.9 4.2 2.5 3 3 CW504125 4.4 4.7 2.5 3 3 CW504129 5.4 5.7 2.5 3 3 CW504717 2.8 3.2 2.5 3 3 CW504721 4.0 4.4 2.5 3 3 CW504723 4.6 4.9 2.5 3 3 CW504725 5.2 5.5 2.5 3 3 CW504729 6.3 6.7 2.5 3 3 CW505317 3.3 3.7 2.5 3 3 CW505321 4.6 5.0 2.5 3 3 CW505323 5.3 5.7 2.5 3 3 CW505325 5.9 6.3 2.5 3 3 CW505329 7.3 7.6 2.5 3 3 CW505917F -- 4.2 2.5 3 3 CW505921F -- 5.6 2.5 3 3 CW505923F -- 6.4 2.5 3 3 CW45/CW505925F -- 7.1 2.5 3 3 CW45/CW505929F -- 8.6 2.5 3 3 CW45/CW50
FIXED UNITS
UnitVisible Glass
Ft2
Standard Glass Thickness (mm)
Performance Class & Grade 1
Dual-Pane Glazing
Triple-Pane Glazing
Ann
eale
d
Tem
per
ed
Ann
eale
d
Tem
per
ed
3235 5.3 2.5 3 3 3 CW503241 6.4 2.5 3 3 3 CW503247 7.5 2.5 3 3 3 CW503253 8.6 2.5 3 3 3 CW503259 9.7 2.5 3 3 3 CW45/CW503265 10.8 3 3 3 3 CW503271 11.9 3 3 3 3 CW45/CW503273 12.3 3 3 3 3 CW45/CW503535 5.9 2.5 3 3 3 CW503541 7.2 2.5 3 3 3 CW503547 8.4 2.5 3 3 3 CW503553 9.6 2.5 3 3 3 CW45/CW503559 10.8 3 3 3 3 CW503565 12.0 3 3 3 3 CW503571 13.3 3 3 3 3 CW45/CW503573 13.7 3 3 3 3 CW45/CW504135 7.2 2.5 3 3 3 CW504141 8.6 2.5 3 3 3 CW504147 10.1 3 3 3 3 CW504153 11.6 3 3 3 3 CW504159 13.0 3 3 3 3 CW504165 14.5 3 3 3 3 CW504171 16.0 3 3 3 3 CW45/CW504173 16.5 3 3 3 3 CW45/CW504735 8.4 2.5 3 3 3 CW504741 10.1 3 3 3 3 CW504747 11.8 3 3 3 3 CW504753 13.5 3 3 3 3 CW504759 15.3 3 3 3 3 CW504765 17.0 3 3 3 3 CW45/CW504771 18.7 4 4 4 4 CW504773 19.3 4 4 4 4 CW505335 9.6 2.5 3 3 3 CW45/CW505341 11.6 3 3 3 3 CW505347 13.5 3 3 3 3 CW505353 15.5 3 4 3 4 CW45/CW505359 17.5 3 4 3 4 CW40/CW505365 19.4 4 4 4 4 CW505371 21.4 4 4 4 4 CW505373 22.1 4 4 4 4 CW505929 8.6 2.5 3 3 3 CW45/CW505935 10.8 3 3 3 3 CW505941 13.0 3 3 3 3 CW505947 15.3 3 3 3 3 CW505953 17.5 3 4 3 4 CW40/CW505959 19.7 4 4 4 4 CW505965 21.9 4 4 4 4 CW505971 24.1 4 4 4 4 CW45/CW505973 24.9 4 4 4 4 CW45/CW50
Rev. 03/26/2018
Architect Series® Traditional
AW-16Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
DESIGN DATA
Wood and Aluminum-Clad Exteriors
Large Awning
VENT AND FIXED UNITS
UnitVent Area Ft2
Visible Glass
Ft2
Standard Glass Thickness (mm) Performance
Class & Grade 1Annealed Tempered
3535 2.0 5.9 2.5 3 LC403541 2.2 7.2 2.5 3 LC403547 2.4 8.4 2.5 3 LC403553 2.6 9.6 2.5 3 LC403559 2.8 10.8 3 3 LC404135 2.2 7.2 2.5 3 LC404141 2.4 8.6 2.5 3 LC404147 2.6 10.1 3 3 LC404153 2.8 11.6 3 3 LC404159 3.0 13 3 3 LC404735 2.4 8.4 2.5 3 LC404741 2.6 10.1 3 3 LC404747 2.8 11.8 3 3 LC404753 3.0 13.5 3 3 LC404759 3.2 15.3 3 3 LC405335 2.6 9.6 2.5 3 LC405341 2.8 11.6 3 3 LC405347 3.0 13.5 3 3 LC405353 3.2 15.5 3 4 LC405359 3.3 17.5 3 4 LC405935 2.8 10.8 3 3 LC405941 3.0 13 3 3 LC405947 3.2 15.3 3 3 LC405953 3.3 17.5 3 4 LC40
5959 3.5 19.7 4 4 LC40
Miscellaneous Formulas
VISIBLE GLASS
Width = Frame – 5-3/4"
Height = Frame – 5-3/4"
ACTUAL GLASS
Width = Frame – 4-3/8"
Height = Frame – 4-3/8"
(1) Maximum performance when glazed with appropriate glass thickness.
Rev. 03/26/2018
Architect Series® Traditional
AW-17Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
DETAILED PRODUCT DESCRIPTIONS
Aluminum-Clad Awning and Large Awning
FRAME • Select softwood, immersion treated with Pella’s EnduraGuard® wood
protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].
• Exterior surfaces are clad with aluminum.• Components are assembled with screws, staples and concealed corner locks.• Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm).• Optional factory-applied jamb extensions available between 4-9/16"
(116mm) and 7-3/16" (183mm) wall depths.• Optional factory-installed fold-out installation fins with flexible fin corners.• Optional factory-applied EnduraClad® exterior trim.
SASH• Select softwood, immersion treated with Pella’s EnduraGuard wood
protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are: [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].
• Exterior surfaces are clad with aluminum and sealed. • Corners mortised and tenoned, glued and secured with metal fasteners. • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"] glazing.• Sash exterior and interior profile is ogee.
WEATHERSTRIPPING• Dual weatherstripping.
� Continuous, flexible santoprene material in dual durometer design with welded corners, compressed between frame and sash for positive seal on all four sides.
� Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between edge of sash and frame.
GLAZING SYSTEM 1• Quality float glass complying with ASTM C 1036.• Custom and high altitude glazing available.• Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]]
[[clear] [[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] [AdvancedComfort Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]].
– or –• Silicone-glazed 1” triple-pane, dual-seal insulating glass [[annealed]
[tempered]] [[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] [krypton]]
– or –• Impact-Resistant
� Silicone-glazed 1" dual-seal impact-resistant insulating glass 1 [PVB] [SGP]. [[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear] [bronze] [gray] [green]]. Laminated clear interior light.
– or – � Silicone-glazed 11/16" dual-seal impact-resistant insulating glass 1 [PVB].
[[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear]]. Laminated [clear] interior light, or [[tempered] [annealed]] exterior light is [[multi-layer Low-E]]. Laminated [[bronze] [gray] [green]] interior light.
EXTERIOR• Aluminum-clad exteriors shall be finished with EnduraClad® protective finish,
in a multi-step, baked-on finish. � Color is [Standard] [custom] 2.
– or –• Aluminum-clad exteriors shall be finished with EnduraClad Plus protective
finish with 70% fluoropolymer resin in a multi-step, baked-on finish. � Color is [Standard] [custom] 2.
INTERIOR• [Unfinished, ready for site finishing] [factory primed with one coat acrylic
latex] [factory prefinished [paint] [stain] 1].
HARDWARE • Roto operator assembly
� Steel worm gear sash operator with hardened gears. � Operator base is zinc die cast with painted finish. � Operator linkage is stainless steel. � Exposed fasteners are stainless steel. � Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117. � Hinge slide and hinge arms are [Awning: Stainless steel] [Large Awning:
wash hinge] [Impact-Resistant: wash hinge].• All vent units are available with operator located on the [Awning: left or right
side as viewed from the exterior] [Large Awning or Impact-Resistant: bottom center of the unit].
• SureLock® System—A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: [Awning: one operating lock installed on units with frame widths 29" and less, two unison operating locks installed on units with frame widths over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks installed on units with frame height over 41"].
• Style of hardware is [Standard integrated fold-away crank and standard lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright brass] [satin nickel] [oil-rubbed bronze] hardware finish] [Antiek fold-away crank and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] [Distressed Bronze] [Distressed Nickel] hardware finish].
OPTIONAL PRODUCTSGrilles
• Integral Light Technology® grilles � Interior grilles are [5/8"] [7/8"] [1-1/4"] [2"] ogee profile that are solid
[Pine] [mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain]1].
� Exterior grilles are [5/8" putty glaze profile] [7/8" [putty glaze] [ogee] profile] [1-1/4" [putty glaze] [ogee] profile] [2" ogee profile] that are extruded aluminum.
� Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] [Simulated French (fixed units only)].
� Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB acrylic
adhesive tape and aligned with non-glare spacer.– or –
• Grilles-Between-the-Glass 3 � Insulating glass contains 3/4" contoured aluminum grilles permanently
installed between two panes of glass (exterior air-space on triple-pane insulating glass).
� Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided].
� Interior color is [White] [Black] [Tan 4] [Brown 4] [Putty 4] [Ivory] [Brickstone] [Harvest] [Cordovan].
� Exterior color 5 is [Standard]2.– or –
• Roomside Removable Grilles � [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with
[Traditional] [Prairie]] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.
� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 2].
� Exterior [unfinished, ready for site finishing] [factory primed] [factory prefinished, finish color matched to exterior cladding 5].
Screens
• InView™ screens � Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the
performance requirements of SMA 1201, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.
� Screen frame finish is [baked enamel [Champagne] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish].
– or –• Vivid View® screens
� PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.
� Screen frame finish is [baked enamel [Champagne] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish].
Hardware
� Optional factory applied limited opening hardware available for vent units in stainless steel; nominal 3" opening.
(1) Insulating glass with argon is Low-E coated (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled. (2) Contact your local Pella sales representative for current color options. (3) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass. (4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with tan or brown exterior. (5) Appearance of exterior grille color will vary depending on Low-E coating on glass.
Rev. 04/09/2018
Architect Series® Traditional
AW-18Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
(1) Low-E coated insulating glass is argon-filled (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled.
(2) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass.
(3) Contact your local Pella sales representative for current designs and color options.
(4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior.
(5) Appearance of exterior grille color will vary depending on Low-E coating on glass.
DETAILED PRODUCT DESCRIPTIONS
Wood Awning and Large Awning
FRAME • Select softwood, immersion treated with Pella’s EnduraGuard® wood
protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].
• Exterior surfaces are [pine: factory-primed] [mahogany: [factory-primed] [ready-to-stain]].
• Overall frame depth is 4-3/8" (111mm) for a wall depth of 4-3/16" (106mm).
• Optional factory-applied jamb extensions available between 4-9/16" (116mm) and 7-3/16" (183mm) wall depths, with Pella's standard wood exterior.
SASH• Select softwood, immersion treated with Pella’s EnduraGuard® wood
protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [clear pine] [mahogany] with no visible fastener holes.
• Exterior Surfaces are [pine: factory-primed] [mahogany [factory-primed] [ready-to-stain]].
• Corners mortised and tenoned, glued and secured with metal fasteners. • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"]
glazing.• Sash exterior profile is putty glaze, interior profile is ogee.
WEATHERSTRIPPING• Dual weatherstripping.
� Continuous, flexible santoprene material in dual durometer design with welded corners, compressed between frame and sash for positive seal on all four sides.
� Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between edge of sash and frame.
GLAZING SYSTEM• Quality float glass complying with ASTM C 1036.• Custom and high altitude [with argon] glazing available.
� Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]] [[clear] [[Advanced Low-E] [SunDefense™ Low-E] [AdvancedComfort Low-E] [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]].
– or – � Silicone-glazed 1" triple-pane insulating glass [[annealed][tempered]]
[[Advanced Low-E ] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] [krypton]]
INTERIOR• [Unfinished, ready for site finishing] [factory primed with one coat acrylic
latex] [factory prefinished [paint] [stain] 2].
HARDWARE • Roto operator assembly
� Steel worm gear sash operator with hardened gears. � Operator base to be zinc die cast with painted finish. � Operator linkage, hinge slide, and hinge arms are stainless steel. � Exposed fasteners are stainless steel. � Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117.
• All vent units are available with operator located on the [Awning: left or right side as viewed from the exterior] [Large Awning: bottom center of the unit].
• SureLock® System—A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: [Awning: one operating lock installed on units with frame width 29" and less, two unison operating locks installed on units with frame width over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks installed on units with frame height over 41"].
• Style of hardware is [Standard integrated fold-away crank and standard lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright brass] [satin nickel] [oil-rubbed bronze] hardware finish][Antiek fold-away crank and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] [Distressed Bronze] [Distressed Nickel] hardware finish].
OPTIONAL PRODUCTSGrilles
• Integral Light Technology® grilles � Interior grilles are solid [5/8"] [7/8"] [1-1/4"] ogee profile that are solid
[pine] [mahogany]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 3].
� Exterior grilles are solid [5/8"] [7/8"] [1-1/4"] putty glaze profile that are [pine] [mahogany]. Exterior surfaces are water repellent, preservative-treated in accordance with WDMA I.S.-4, and are [unfinished, ready for site finishing] [factory primed].
� Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] [Simulated French (fixed units only)].
� Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB acrylic
adhesive tape and aligned with the non-glare spacer.– or –
• Grilles-Between-the-Glass 2 � Insulating glass contains 3/4" contoured aluminum grilles permanently
installed between two panes of glass (exterior air-space on triple-pane insulating glass).
� Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided].
� Interior color is [White] [Black] [Tan 4] [Brown 4] [Putty 4] [Ivory] [Brickstone] [Harvest] [Cordovan].
� Exterior color 5 is [standard]3.– or –
• Roomside Removable Grilles � [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with
[Traditional] [Prairie] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.
� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 3].
� Exterior [unfinished, ready for site finishing] [factory-primed] [finish color matched to exterior cladding].
Screens
• InView™ Screens � Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the
performance requirements of SMA 1201, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.
� Screen frame finish is [baked enamel [Champagne] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish].
– or –• Vivid View® Screens
� PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.
� Screen frame finish is [baked enamel [Champagne] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish].
Hardware
� Optional factory applied limited opening hardware available for vent units in stainless steel; nominal 3" opening.
Rev. 03/26/2018
Architect Series® Traditional
AW-19Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
UNIT SECTIONS - WOOD COLLECTION
Aluminum-Clad Exterior
Solid Mahogany or Pine
Solid Pine
Douglas Fir
JAMBS
SILL
HEAD
JAMBS
SILL
HEAD
DOUGLAS FIR INTERIOR PINE OR MAHOGANY INTERIOR
Architect Series® Traditional
AW-20Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
[46]1 13/16"
[46]
1 13
/16"
[46]
1 13
/16"
[46]1 13/16"
FRAME WIDTH
[47]1 7/8"
[19]3/4"
[73]2 7/8"
[33]
1 5/
16"
[94]
3 11
/16"
Installation FinOptional Fold-out
FRA
ME
HE
IGH
T
[70]
2 3/
4"[1
9]3/
4"[4
7]1
7/8"
FRAME WIDTH
FRA
ME
HE
IGH
T
[47]1 7/8"
[19]3/4"
[75]2 15/16"
[73]
2 7/
8"[1
9]3/
4"[4
8]1
7/8"
[19]3/4"
[19]
3/4"
[19]3/4"
[33]
1 5/
16"
[94]
3 11
/16"
[127]5"
Installation FinOptional Fold-out
VENT
FIXED
VENT / FIXEDVERTICAL JOINING MULLION
VENT / VENTVERTICAL JOINING MULLION
VENT / VENTHORIZONTAL JOINING MULLION
J
FS
FH
OJ
VH
VS
FJ
JAMBJ
FS FIXED SILL
FH FIXED HEAD
OPERATOR JAMBOJ
FJ FIXED JAMB
VH VENT HEAD
VS VENT SILL
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
UNIT SECTIONS
Aluminum-Clad Exterior
TYPICAL JOINING MULLIONS
Architect Series® Traditional
AW-21Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
TYPICAL JOINING MULLIONS
UNIT SECTIONS
Wood Exterior
Vent and Fixed - Putty Exterior Glazing Profile
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
VENT
FIXED
[46]
1 13
/16"
[46]
1 13
/16"
[46]1 13/16"
[73]
2 7/
8"
FRAM
E H
EIG
HT
[138]5 7/16"
[28]
1 1/
16"
[46]
1 13
/16" [47]
1 7/8"[19]3/4"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[30]1 3/16"
[30]1 3/16"
[29]
1 1/
8"[1
06]
4 3/
16"
[19]
3/4"
[47]
1 7/
8"
[111]4 3/8"
[73]
2 7/
8"
FRAM
E H
EIG
HT
[138]5 7/16"
[28]
1 1/
16"
[46]
1 13
/16"
Shown1-1/8" Subsill #3544
1-78" Brickmould #3443
[47]1 7/8"
[19]3/4"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[30]1 3/16"
[30]1 3/16"
[19]3/4"
[29]
1 1/
8"[1
06]
4 3/
16"
VENT / VENTVERTICAL JOINING MULLION
FIXED / VENTHORIZONTAL JOINING MULLION
VENT / FIXEDVERTICAL JOINING MULLION
[19]
3/4"
[47]
1 7/
8"
[111]4 3/8"
VJ
LS
FS
FH
OJ
VH
FJ
FS FIXED SILL
FH FIXED HEAD
FJ FIXED JAMB
LOCK JAMBLJ HINGE JAMBHJ
VH VENT HEAD
VS VENT SILL
Architect Series® Traditional
AW-22Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
UNIT SECTIONS - WOOD COLLECTION
Aluminum-Clad Exterior
Large Awning
DOUGLAS FIR INTERIOR PINE OR MAHOGANY INTERIOR
Solid Mahogany or Pine
Solid Pine
Douglas Fir
JAMBS
SILL
HEAD
JAMBS
SILL
HEAD
Architect Series® Traditional
AW-23Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
[46]
1 13
/16"
[46]1 13/16"
FIXED / VENTHORIZONTAL JOINING MULLION
VENT / FIXEDVERTICAL JOINING MULLION
FRAME WIDTH
FRA
ME
HE
IGH
T
[47]1 7/8"
[19]3/4"
[73]2 7/8"
[72]
2 7/
8"[1
9]3/
4"[4
8]1
7/8"
[19]3/4"
[19]
3/4"
[33]
1 5/
16"
[94]
3 11
/16"
[127]5"
Installation FinOptional Fold-out
VENT
VENT / VENTVERTICAL JOINING MULLION
LJ
VH
VS
LOCK JAMBLJ
VH VENT HEAD
VS VENT SILL
UNIT SECTIONS
Aluminum-Clad Exterior
Large Awning
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
TYPICAL JOINING MULLIONS
[46]
1 13
/16"
[46]1 13/16"
FIXED / VENTHORIZONTAL JOINING MULLION
VENT / FIXEDVERTICAL JOINING MULLION
FRAME WIDTH
FRA
ME
HE
IGH
T
[47]1 7/8"
[19]3/4"
[73]2 7/8"
[72]
2 7/
8"[1
9]3/
4"[4
8]1
7/8"
[19]3/4"
[19]
3/4"
[33]
1 5/
16"
[94]
3 11
/16"
[127]5"
Installation FinOptional Fold-out
VENT
VENT / VENTVERTICAL JOINING MULLION
LJ
VH
VS
LOCK JAMBLJ
VH VENT HEAD
VS VENT SILL
Architect Series® Traditional
AW-24Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
UNIT SECTIONS
Wood Exterior
Large Awning- Putty Exterior Glazing Profile
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
VENT
[46]
1 13
/16"[46]
1 13/16"
[73]
2 7/
8"
FRAM
E H
EIG
HT
[138]5 7/16"
[28]
1 1/
16"
[46]
1 13
/16"
Shown1-1/8" Subsill #3544
1-78" Brickmould #3443
[47]1 7/8"
[19]3/4"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[30]1 3/16"
[30]1 3/16"
[19]3/4"
[29]
1 1/
8"[1
06]
4 3/
16"
[19]
3/4"
[47]
1 7/
8"
[111]4 3/8"
VS
LJ
VH
LOCK JAMBLJ
VH VENT HEAD
VS VENT SILL