Combi hammer TE 30-C-AVR - Nixon Hire · 91 Drilling and Demolition Systems | 0800 886 100 2...
Transcript of Combi hammer TE 30-C-AVR - Nixon Hire · 91 Drilling and Demolition Systems | 0800 886 100 2...
91
Drilling and Demolition Systems
www.hilti.co.uk | 0800 886 100www.hilti.ie | 1850 287 3872 Drilling and Demolition Systems
Combi hammerTE 30-C-AVR
ApplicationsDrilling anchor holes and through-holes in concrete and masonry, ndiameter range 4 - 28 mm, recommended range 8 - 20 mmLight chiselling on brick and block, corrective chiselling and nfinishing on concreteDrilling in wood and metal using the keyless chuck and drill bits nwith smooth shank up to 13 mm dia.Driving anchor screws and concrete screw anchors n
OrderingOrder description Package Contents Item numberKit TE 30-C-AVR 110v Complete with TE-C3X 14/22 drill bit, TE-C3X 12/27 drill bit, TE-C3X 10/22 drill bit
and TE-CP-SM 18 pointed polygon chisel00411530
Kit TE 30-C-AVR 230v Complete with TE-C3X 14/22 drill bit, TE-C3X 12/27 drill bit, TE-C3X 10/22 drill bit and TE-CP-SM 18 pointed polygon chisel
00411527
Technical dataTE 30-C-AVR
Power range 850 WSpeed 1 (no load) 750 rpmDrilling Performance 62 cm³/min @ Ø 12 mm
78 cm³/min @ Ø 16 mm58 cm³/min @ Ø 20 mm
Reversing switch YesContact Force 80 NSingle impact energy as per EPTA 05/2009 (100% joules)
3.3 J
Hammering speed (under load 100%)
4080 impacts/minute
Triaxial vibration for chiselling (concrete)
11 m/s²
A-weighted emission sound pressure level acc. EN 60745
90 dB (A)
Dimensions (LxWxH) 379 x 93 x 213 mmWeight in accordance with EPTA-Procedure 01/2003
4.2 kg
Drilling and chiselling with top working comfort
AdvantagesCombihammer with chiselling function for a wide range of napplicationsActive Vibration Reduction (AVR) makes the tool less tiring to nuse and increases daily productivityMost impressive power-to-weight ratio in the TE-C class n(SDS plus)Superior working comfort: perfect balance, low weight, ncompact designRuggedly built from high-grade materials and components for nunbeaten, extra-long lifetimeChoice of chucks available, can be changed quickly without nneed for tools
For drill bits and inserts see pages 105 - 110For chisels see pages 121 - 122