COM PANY P ROFILE - L39-ng.cz - L-39NG Next generation · PDF fileCOM PANY P ROFILE AE RO...

Clarex Investments

| Povazska Bystrica, Slovak Republic Aircraft Engines MRO

COMPANY PROFILE

AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic

- The largest aerospace manufacturer in the Czech Republic- One of the oldest aerospace manufacturers in the world (*1919)- Focused on development, production, sales and support of civil and military aerospace technology- Extensive experience from production of over 11,000 aircraft- High-quality technological base

- Well-established cooperation with leading aerospace manufacturers- Convenient location near Prague, the Capital of the Czech Republic- More than 1,400 employees- The sole shareholder of the Company is private equity group Penta Investments

SUBSIDIARIES

YOUR PREFERRED PARTNERIN AEROSPACE TECHNOLOGIES

- AS 9100/ISO 9001 certified quality management system

AERO Vodochody AEROSPACE a.s. | U Letiště 374 | 250 70 Odolena Voda | email: [email protected] | www.aero.cz

- Participation in entire life cycle of civil and military projects, from development to industrialisation and validation of products

- Competence to design and produce complex structures with high degree of product finalisation, including systems integration and testing, full control of quality, full supply chain management and complex customer support starting from production transfer phase, through to implementation of customer's requirements during production phase to after-sales support

- Combination of experience in aerospace production dating back to 1919 and every-day practice within running serial production, using the latest technology and test methods

AEROSTRUCTURES PROGRAMS

Aerostructures Programs Portfolio

- Sikorsky Aircraft Corporation – S-76 helicopter (since 2000)- Sikorsky Aircraft Corporation – UH-60M (since 2010) and S-70i (since 2012) Black Hawk helicopter cockpit- Embraer – KC-390 design and built-to-print packages (since 2011)

program (since 2009)- Alenia Aermacchi – C-27J Spartan center wing box (since 2006)- Latecoere – Embraer 170/190 door subassemblies (since 2007)- Saab – JAS-39 Gripen pylons (since 2008)- Boeing Company – F/A-18E/F/G gun bay door (since 2001)

WE COOPERATE WITH LEADING AEROSPACE MANUFACTURERS ON WORLD-CLASS AEROSTRUCTURES PROGRAMS

COMPLEX AEROSTRUCTURES:

Airbus A320 family: A320 Main landing gear, side-stays and subassemblies

Embraer KC-390: Wing Fixed Leading Edge, Rear Fuselage II, all Cabin Doors and Cargo Ramp

Embraer 170/190: door subassemblies

CSeries: fixedleading edge

Sikorsky S-76: complete helicopter ready for dynamic parts installation

UH-60M and S-70i Black Hawk: (helicopter) cockpit

- Sonaca – Bombardier CSeries design-to-build fixed leading edge

- Alenia Aermacchi – A321 section 14A panels (since 2013)- Messier-Bugatti-Dowty – A320 main landing gear, side-stays (since 2011)- Premium Aerotec – A320/A330 subassemblies (since 2005)- Aircraft Industries – L-410 landing gear (since 1969)

A321 section 14A panels


EMBRAER KC-390 PROGRAM

AEROSTRUCTURES PROGRAM

- Contract signed Q1 2011

- First flight, initial and final operational clearance in 2016

KC-390 Design and Built-to-print Packages

- Aero is a partner of the Brazilian aerospace manufacturer Embraer - Design, development, industrialisation and serial production of the Wing Fixed Leading Edge- Industrialisation, tooling design, tooling production and serial production of the Rear Fuselage II, all Cabin Doors and Cargo Ramp- Providing after sales support for all products

KC-390 PROGRAM IN NUMBERS:

AERO IS A PARTNER OF EMBRAER IN DESIGN, DEVELOPMENT AND PRODUCTION OF NEW MILITARY MULTI-ROLE TRANSPORT AIRCRAFT KC-390

cargo ramp

wing fixed leadingedgerear

fuselage II

all cabin doors

- First flight in 2014


BOMBARDIER CSERIES PROJECT


- Contract signed in June 2009

- First prototype in April 2012

- Entry into service 2014

CSeries Wing Fixed Leading Edge development and production

- Aero is responsible for design, development and manufacturing of the Wing Fixed Leading Edges for a new and innovative CSeries Aircraft for the Canadian aerospace manufacturer Bombardier- Aero is a partner of Belgian company Sonaca in this project- Aero is a member of a joint Sonaca-Aero realisation team which is part of the Joint Development Team led by Bombardier Aerospace Company

PROGRAM IN NUMBERS:

AERO SIGNED ITS FIRST HISTORIC INTERNATIONAL RISK-SHARING CONTRACT WITH THE BELGIAN COMPANYSONACA AT THE PARIS AIR SHOW IN JUNE 2009

CSeries: fixedleading edge

- First flight in 2013


- First S-76C+ unit completed in December 2000, S-76D model in production since 2010

- 8,500 components assembled, 3,700 produced by Aero

- More than 200 suppliers managed by Aero

- Aero has delivered more than 300 S-76 helicopter airframes since 2000

SIKORSKY S-76 HELICOPTER

S-76 Helicopter Production and Services

- Fully assembled and equipped helicopter airframes ready for installation of dynamic parts- Avionics, hydraulic, electric and fuel system installation- Tube manufacture and tube system installation- Electric wire harness manufacture and installation- Detail part fabrication, including application of special processes- Ground tests not requiring dynamic parts, including water, fuel, hydraulic and electric tests- Full supply chain management- Warranty and after-sales services

HIGH-QUALITY AND RELIABILITY OF OUR DELIVERIES ARE PROVEN BY OBTAINING UTC SUPPLIER GOLD AWARD

S-76 PROGRAM IN NUMBERS:


Sikorsky S-76: complete helicopter ready for dynamic parts installation


SIKORSKY UH-60M AND S-70i BLACK HAWK HELICOPTER


- UH-60M contract signed in January 2010

- First cockpit manufactured in May 2011

- S-70i contract signed in September 2012

- First cockpit manufactured in February 2013

UH-60M and S-70i Black Hawk Helicopter Production and Services

- Fully assembled cockpit of the UH-60M and S-70i Black Hawk helicopter- Installation of electric harnesses and control systems- Fabrication of parts, including application of special processes- Control of the supply chain - Provision of spare parts

BLACK HAWK PROGRAM IN NUMBERS:

AERO IS PROUD TO BE PART OF A TEAM THAT PRODUCES THE LEGENDARY MILITARY HELICOPTER.

BLACK HAWKS HAVE BEEN IN THE U.S. ARMY SERVICE SINCE 1978. MORE THAN 3000 VARIANTS OF THE BLACK HAWK ARE OPERATED WORLDWIDE.

UH-60M and S-70i Black Hawk: cockpit


JAS-39 GRIPEN NATO STANDARD PYLONS


- Contract signed in October 2008

- First pylon completed in October 2009

JAS-39 Gripen Pylons Production and Services

- Fully assembled pylons ready for installation on aircraft- Detail part fabrication, including application of special processes- Electric harnesses manufacture and testing- Composites production and assembly - Tube manufacturing and installation- Supply chain management- Spare parts delivery

JAS-39 PROGRAM IN NUMBERS:

WITHIN TWELVE MONTHS AERO HAS RAISED ITS PRODUCTION, QUALIFIED ALL SPECIAL PROCESSES AND PRODUCED THE FIRST PYLON ASSEMBLY.

JAS-39 Gripen: pylons


- Contract signed in September 2006

- First center wing box completed in December 2007

- 3,200 components, 60 % produced by Aero

ALENIA C-27J CENTER WING BOX

C-27J center wing box production and services

aircraft assembly- Integral fuel tanks

- Leading edges, including de-icing boots- Detail part fabrication, including application of special processes- Electric system manufacture, testing and installation- Tube manufacture and tube system installation

- All surfaces primed- Full supply chain management

- Warranty and after-sales services, including repairs, spare

THE CENTER WING BOX PRODUCTION FOR ALENIA AERMACCHI REPRESENTS A DELIVERY WITH HIGH VALUE ADDED

C-27J PROGRAM IN NUMBERS:


Alenia C-27J: center wing box

- More than 30 suppliers managed by Aero

parts delivery and modifications changes

- Fully assembled and equiped center wing box ready for final

- Engine, fuselage and flap hinges

- Testing of all systems, including final fuel leakage test

- Production control of several configurations


L-159 ALCA

L-39 ALBATROS

L-59 SUPER ALBATROS

- Analysis and Design

- Maintenance, Repair, Overhaul (MRO)

- Ground and Flight Testing

- Customer Training

- Logistics Support

DEFENCE & MRO PROGRAMS

Defence & MRO Programs Portfolio

- L-39 Albatros

Single-engine, two-seat jet training and light attack aircraft

-

L-59 Super Albatros

Combines design characteristics and experience from the L-39 Albatros family with a new more powerful engine, advanced avionics (including head-up display), improved airframe and other systems

-

L-159 Combat & Training System Advanced training and light combat aircraft, integrated logistic support,

-

HAVING PRODUCED 6,500 UNITS, REPRESENTING TWO THIRDS OF THE WORLD PRODUCTION, WE ARE HISTORICALLY THE LARGEST JET TRAINING AIRCRAFT PRODUCER IN THE WORLD

COMPLEX SUPPORT SERVICES:

- Retrofit, Modification, Upgrade (RMU)

mission planning and debriefing and ground based training system

Support ServicesSupport services for military and commercial aircraft

Military Flight Training



DEFENCE & MRO PROGRAMSL-39NG

L-39NG is a modern multi-role training aircraft for 4th and 5th generation of fighters. In addition to advantages of legacy L-39 versions such as low operational cost, high reliability, easy handling and rugged design including wide track undercarriage with low pressure tyres and air inlets positioned above the wing in order to prevent foreign object damage to the engine, the L-39NG features:

- Suitability for western and eastern types of fighters- HUD, MFDs, full tactical info presentation- New Williams International FJ44-4M turbofan engine with FADEC controls

and electrical starting eliminating costly jet fuel starter- Four underwing and one underfuselage weapon pylons for a wide variety of gun,

bomb and rocket armament and external fuel tanks- Single-piece canopy for improved cockpit visibility- New escape system with „zero-zero“ ejection seats- Redesigned wing with integral fuel tanks significantly

improving range and endurance- Redesigned aiframe with fatigue life of up to

15,000 flight hours- To reduce operating costs, the L-39NG is designed

for an on condition maintenance approach

AERO HAS DELIVERED MORE THAN3000 UNITS OF SEVERAL VERSIONSOF L-39 ALBATROS TO 45 MILITARYOPERATORS AND PRIVATE PILOTS.AIRCRAFT L-39 HAVE OVER 5,000,000FLIGHT HOURS.

CAPABILITIES:

- Aircraft manufacturing- Maintenance, repair, overhaul- Ground and flight personnel training- Qualification and testing- Integrated logistic system- Certification support- Design and development- Special analytic and consulting services

MODERN AVIONICS

NEW COCKPIT SYSTEM

POWERFUL PROPULSION

MODERNIZED AIRFRAME

HIGHPERFORMANCE

SYSTEMS UPGRADE

OPERATION IMPROVEMENTS

www.l-39ng.cz

FINAL PRODUCTION TRADITION

2000 Ae 270 Single-engine turboprop aircraft1997 L-159 Advanced training and light combat aircraft1992 L-59 Super Albatros Jet training and light attack aircraft1968 L-39 Albatros Jet training and light attack aircraft1962 MiG-211959 L-29 Delfín Jet training aircraft1958 MiG-191953 MiG-151947 Ae-45 Twin-engine utility aircraft1942 Siebel Si-204D Twin-engine military aircraft1939 Bücker Bü-131 Training and aerobatic biplane1938 A-300 Twin-engine low wing bomber1938 A-304 Twin-engine low wing military aircraft 1936 Marcel Bloch MB.200 All-metal bomber1932 A-101 Military biplane family1929 A-34 Sport and training aircraft1925 De Havilland DH-50 Airliner1923 Ab-11 Family of military biplanes1921 A-10 First in-house designed civil airliner1919 A-1 First in-house designed military trainer

WE HAVE ALWAYS RESPONDED TO THE LATEST MARKET CHANGES AND FOCUSED ON THE HIGHEST QUALITY OF CUSTOMER SUPPORT

Marcel Bloch MB.200

MIG-15

A-1

L-59T

L-39C

L-29

Ae 270

Bücker Bü-131

Ae-45

Supersonic fighter

Supersonic fighter Jet fighter

2007 L-159T1 Two-seat advanced training aircraft for the Czech Air Force2002 L-159B Two-seat advanced training aircraft


COM PANY P ROFILE - L39-ng.cz - L-39NG Next generation · PDF fileCOM PANY P ROFILE AE RO...

Documents

Transcript of COM PANY P ROFILE - L39-ng.cz - L-39NG Next generation · PDF fileCOM PANY P ROFILE AE RO...