COLT REVOLVER MOULDS - SS Firearms Catalog/2011 Catalog shooting accessories.pdfCOLT PISTOL FLASKS...

11
57 COLT REVOLVER MOULDS The Following are Reproductions of the Original Style Colt Moulds A2031 .31 CALIBER POCKET, Brass, 2 Cavity, Roundball and Conical ............................................. 25.00 A2036 .36 CALIBER POCKET, Steel, 2 Cavity, Roundball and Conical .............................................. 25.00 A2136 .36 CALIBER NAVY, Brass, 2 Cavity, Roundball and Conical .................................................. 25.00 A2144 .44 CALIBER WALKER, Steel, 1 Cavity, Conical ...................................................................... 25.00 A2244 .44 CALIBER DRAGOON, Steel, 2 Cavity, Roundball and Conical ......................................... 30.00 PISTOL TOOLS F8001 COLT PAT, ELEY BROS CAP CANS, Stamped Steel, Japanned, with Green Label, Repro ..... 12.00 F8002 DRAGOON COMBINATION TOOL, Blued, Repro .................................................................... 18.50 F8003 L TOOL FOR .44 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75 F8004 L TOOL FOR .36 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75 F8005 L TOOL FOR .31 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75 F8001 F8002 F8003 F8004 F8005 COLT PISTOL FLASKS The Following Flasks are From the Colt Continuation Series F2044 1860 ARMY FLASK, Embossed with stand of flags, Brass Sprout, Repro ............................... 26.00 F8006 .36 POCKET FLASK, Embossed with Eagle, Brass Sprout, Repro ........................................... 26.00 F8007 .36 NAVY FLASK, Embossed with stand of flags. Brass Slant Spout, Repro ........................... 26.00 F8008 .44 DRAGOON FLASK, Embossed with stand of flags. Plunger Spout, Repro ....................... 33.00 F2044 F8006 F8007 F8008

Transcript of COLT REVOLVER MOULDS - SS Firearms Catalog/2011 Catalog shooting accessories.pdfCOLT PISTOL FLASKS...

57

COLT REVOLVER MOULDS

The Following are Reproductions of the Original Style Colt Moulds

A2031 .31 CALIBER POCKET, Brass, 2 Cavity, Roundball and Conical ............................................. 25.00A2036 .36 CALIBER POCKET, Steel, 2 Cavity, Roundball and Conical .............................................. 25.00A2136 .36 CALIBER NAVY, Brass, 2 Cavity, Roundball and Conical .................................................. 25.00A2144 .44 CALIBER WALKER, Steel, 1 Cavity, Conical ...................................................................... 25.00A2244 .44 CALIBER DRAGOON, Steel, 2 Cavity, Roundball and Conical ......................................... 30.00

PISTOL TOOLS

F8001 COLT PAT, ELEY BROS CAP CANS, Stamped Steel, Japanned, with Green Label, Repro ..... 12.00F8002 DRAGOON COMBINATION TOOL, Blued, Repro .................................................................... 18.50F8003 L TOOL FOR .44 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75F8004 L TOOL FOR .36 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75F8005 L TOOL FOR .31 PERCUSSION REVOLVER, Blued, Repro .................................................... 12.75

F8001

F8002 F8003F8004F8005

COLT PISTOL FLASKS

The Following Flasks are From the Colt Continuation Series

F2044 1860 ARMY FLASK, Embossed with stand of flags, Brass Sprout, Repro ............................... 26.00F8006 .36 POCKET FLASK, Embossed with Eagle, Brass Sprout, Repro ........................................... 26.00F8007 .36 NAVY FLASK, Embossed with stand of flags. Brass Slant Spout, Repro ........................... 26.00F8008 .44 DRAGOON FLASK, Embossed with stand of flags. Plunger Spout, Repro ....................... 33.00

F2044

F8006 F8007 F8008

58

SIZING DIES

SA450 PRECISION MACHINED FOR USE WITH LYMAN #450/4500 LUBER-SIZER, LISTEDELSEWHERE IN CATALOG (See Index). COMPLETE WITH TOP BULLET PUNCH. ORDERSIZE REQUIRED. FROM .250 THRU .590 IN .001 INCREMENTS ....................................... 35.00

SA450 BULLET SIZING DIE FOR .69 CALIBER MUSKET. HAND SIZER FOR ROUND BALL ORCONICAL. SPECIFY SIZE REQUIRED FROM .680 - .715, TO BE USED WITH WOODENDOWEL. ORDER IN .005 INCREMENTS ............................................................................... 28.00

RELOADING SUPPLIES

SA168 LYMAN #55 CLASSIC POWDER MEASURE WITH POWDER TUBE AND DROP TUBE, FORSMOKELESS OR BLACKPOWDER ...................................................................................................150.00

SA169 BOTTOM POUR LADLE, 1 POUND CAPACITY ..................................................................... 28.00SA171 LEE LEAD MELTING POT, PRECISION MELTER MODEL, DIP TYPE .............................. 39.75SA172 LEE LEAD MELTING POT, MAGNUM MELTER, 20 POUND CAPACITY, DIP TYPE ...... 75.00SA173 LYMAN LUBER-SIZER #450/4500, FOR USE WITH OUR SIZING DIES ......................... 176.00SA182 RCBS PRIMER POCKET CLEANING TOOL, Handle w/ brushes for large & small primers . 14.00SA202 LEE POWDER SCALE, MAGNETIC DAMPENED ................................................................. 30.00SA203 LEE POWDER FUNNEL, FITS OVER CARTRIDGE CASE ....................................................... 4.00SA204 LEE POWDER MEASURE KIT, 15 MEASURES, 1300 LOADS ............................................. 12.00SA205 MAYNARD SHELL HOLDER FOR RELOADING PRESS. CUSTOM MADE SHELLHOLDER

FITS OUR CC1,CC1A, CC1B MAYNARD CASES ..................................................................... 32.00SA206 LYMAN LEAD THERMOMETER, 200-1000 DEG. 6 INCH STEM WITH CLIP ................... 46.00SA225 CASTING FLUX – MARVELUX, ½ lb Container, use with all lead based alloys .................... 11.00SA227 MTM 1200 GR DIGITAL RELOADING SCALE, LED Readout, Weighs Powder, Bullets .... 46.00SA230 RCBS PRIMER FLIP TRAY ............................................................................................................ 7.95SA231 RMC POWDER MEASURE WITH SPOUT, 160g Capacity ...................................................... 16.50SA234 RCBS CASE MOUTH DEBURING TOOL, Fits .17-60 Cal. Works on all Civil War Carbine Brass

Cartridge Cases ............................................................................................................................... 24.95

169

171, 172

173

202

203

204

205

225

227

182

230

231

206

168

234

59

RCBS-HODGDON MOULDS

Hodgdon/RCBS Minie Ball Mould. Specifically designed for Muzzle loading target shooters, this mouldproduces a Minie ball which provides excellent results at 50 & 100 yard distances. Moulds are manufacturedusing RCBS steel blocks, which utilize a captive floating core plug. Packaged in plastic storage container.The .50 Caliber mould for the Maynard and Smith Carbines is supplied with 2 adjustable base plugs. Oneplug produces a hollow base, while the other plug produces a flat base bullet. Each core plug is movable toprovide the shooter with a means of adjusting the overall length of bullet and total weight. Mould casts a.520 bullet. Blocks accept standard RCBS handles and feature an extra heavy sprue cutter. Packaged inconvenient plastic storage container.

P/N 55005-500 .500 Bore Diameter, Supplied With Flat Base & Minie Cavity ........................................ 99.75P/N 55005-520 .520 Bore Diameter, Supplied With Flat Base & Minie Cavity, For Maynard & Smith ... 99.75P/N 55005-540 .540 Bore Diameter ............................................................................................................... 99.75P/N 55005-576 .576 Bore Diameter ............................................................................................................... 99.75P/N 55005-578 .578 Bore Diameter ............................................................................................................... 99.75P/N 55005-580 .580 Bore Diameter ............................................................................................................... 99.75P/N 55005-584 .584 Bore Diameter ............................................................................................................. 99.75P/N 80015 RCBS Lead Dipper ............................................................................................................... 40.00P/N 80025 RCBS Mould Handles .......................................................................................................... 40.00P/N 82085 .45 Caliber, .458 Diameter Blackpowder Cartridge Silhouette Mould ............................. 99.75P/N 82307 .44 Caliber, 200gr Double Cavity ...................................................................................... 85.00P/N 82308 .45 Caliber, 230gr Double Cavity ...................................................................................... 85.00P/N 082103 .58 Caliber Standard Original Style Minie Ball Mould, With Core Plug. 500gr ........... 99.75

LEE90255 LEE MOULD, .515 450 Grain, C.W. Carbines, 50/70 ...................................................... 29.00LEE90266 LEE MOULD, .515, 500gr, Civil War Carbines/ 50-70’s. Complete With Handles ..... 29.00LEE90285 LEE MOULD, .429, 200gr, 44-40, Double Cavity, Complete With Handles ................. 29.00LEE90396 LEE MOULD, .50 Caliber Conical, .515 Diameter, 320gr W/ Handles .......................... 29.00LEE90460 LEE MOULD, .562 Roundball, Fits C.W. Burnside, W/ Handles ................................... 29.00LEE90471 LEE MOULD, Minie Ball .50 Cal, Ashcan Design, .500 Dia, 384gr W/ Handles ......... 29.00LEE90473 LEE MOULD, Minie Ball For .54 Caliber Muskets, .535 Diameter, W/ Handles ........... 29.00LEE90474 LEE MOULD, Minie Ball For .54 Caliber Muskets, .540 Diameter, W/ Handles ........... 29.00LEE90475 LEE MOULD, Minie Ball .58 Cal, Ashcan Design, .575 Dia, 470gr W/ Handles ......... 29.00LEE90476 LEE MOULD, Minie Ball For .58 Caliber Muskets, .575 Diameter, W/ Handles ........... 29.00LEE90478 LEE MOULD, Minie Ball For .58 Caliber Muskets, .578 Diameter, W/ Handles ........... 29.00LEE90978 LEE MOULD, .690 Roundball, With Handles ................................................................. 29.00SA184 LYMAN MOULD HANDLES, Fits Current 1 & 2 Cavity Moulds ................................. 44.00SA185 LYMAN MOULD HANDLES, Fits 4 Cavity Moulds ..................................................... 44.00

LEE & LYMAN BULLET MOULDS

60

BULLETSThe Listed Bullets are Hand Cast and Sold in Bags of 25 unless otherwise noted.

Conical BulletsHCB01 .457 Diameter, 300 gr, 45/70 ........................................................................................................... 9.25HCB02 .457 Diameter, 405 gr, 45/70 ........................................................................................................... 9.25HCB03 .457 Diameter, 500 gr, 45/70, Round Nose .................................................................................... 9.25HCB04 .457 Diameter, 500 gr, 45/70, Pointed Nose .................................................................................. 9.25HCB05 .515 Diameter, 350 gr, Smith / Maynard .......................................................................................... 9.25HCB06 .515 Diameter, 360 gr, 50/70 ........................................................................................................... 9.25HCB07 .525 Diameter, 370 gr, Pointed ........................................................................................................ 9.25HCB08 .54 Diameter, 455 gr, Buffalo Bullet, Hollow Point ...................................................................... 9.25HCB09 .54 Diameter, 477 gr, Sharps, Button Back ..................................................................................... 9.25HCB10 .54 Diameter, 370 gr, Spencer, Healed Flat Nose ............................................................................ 9.25HCB11 .54 Diameter, 360 gr, Burnside .556 ................................................................................................ 9.25HCB12 .705 Diameter, 585 gr, Austrian Carbine, 20 Pieces ...................................................................... 9.25

Minie-BallsHCB13 .445 Diameter, 230 gr, Standard ...................................................................................................... 9.75HCB14 .445 Diameter, 290 gr, Flat Nosed ................................................................................................... 9.75HCB15 .450 Diameter, 240 gr, Standard ...................................................................................................... 9.75HCB16 .500 Diameter, 335 gr, Standard ...................................................................................................... 9.75HCB17 .500 Diameter, 377 gr, Flat Nosed ................................................................................................... 9.75HCB18 .533 Diameter, 380 gr, Standard ...................................................................................................... 9.75HCB19 .533 Diameter,425 gr, Flat Nosed .................................................................................................... 9.75HCB20 .540 Diameter, 415 gr, Lee Round Nosed ....................................................................................... 9.75HCB21 .543 Diameter, 420 gr, Standard ...................................................................................................... 9.75HCB22 .548 Diameter, 415 gr, Standard ...................................................................................................... 9.75HCB23 .575 Diameter, 315 gr, Wad Cutter, Thin Skirt ............................................................................... 9.75HCB24 .575 Diameter, 460 gr, Old Style ..................................................................................................... 9.75HCB25 .575 Diameter, 350 gr, Wad Cutter .................................................................................................. 9.75HCB26 .575 Diameter, 505 gr, Standard ...................................................................................................... 9.75HCB27 .575 Diameter, 566 gr, Parker Hale ................................................................................................. 9.75HCB28 .575 Diameter, 410 gr, Hodgdon ..................................................................................................... 9.75HCB29 .575 Diameter, 530 gr, Standard ...................................................................................................... 9.75HCB30 .577 Diameter, 350 gr, Wad Cutter .................................................................................................. 9.75HCB31 .577 Diameter, 505 gr, Standard ...................................................................................................... 9.75HCB32 .577 Diameter, 566 gr, Parker Hale ................................................................................................. 9.75HCB33 .577 Diameter, 410 gr, Hodgdon ..................................................................................................... 9.75HCB34 .577 Diameter, 530 gr, Standard ...................................................................................................... 9.75HCB35 .580 Diameter, 410 gr, Hodgdon ..................................................................................................... 9.75HCB36 .580 Diameter, 530 gr, Standard ...................................................................................................... 9.75HCB37 .580 Diameter, 315 gr, Wadcutter .................................................................................................... 9.75HCB38 .582 Diameter, 330 gr, Wadcutter .................................................................................................... 9.75HCB39 .685 Diameter, 530 gr, Wadcutter, 20 Pieces .................................................................................. 9.75HCB40 .685 Diameter, 750 gr, Standard, 20 Pieces .................................................................................... 9.75HCB41 .686 Diameter, 530 gr, Wadcutter, 20 Pieces .................................................................................. 9.75HCB42 .686 Diameter, 750 gr, Standard, 20 Pieces .................................................................................... 9.75HCB43 .690 Diameter, 510 gr, Wadcutter, 20 Pieces .................................................................................. 9.75HCB44 .691 Diameter, 510 gr, Wadcutter, 20 Pieces .................................................................................. 9.75HCB45 .58 Diameter, 430 gr, Wilkenson Compression/Cleaner Bullet .................................................... 9.75HCB46 .69 Diameter, 550 gr, Wilkenson Compression/Cleaner Bullet .................................................... 9.75

RoundballsHCB47 .550 Diameter, 245 gr, 50 Pieces ..................................................................................................... 9.25HCB48 .562 Diameter, 262 gr, 50 Pieces ..................................................................................................... 9.25HCB49 .575 Diameter, 275 gr, 50 Pieces ..................................................................................................... 9.25HCB50 .662 Diameter, 435 gr ....................................................................................................................... 9.25HCB51 .678 Diameter, 466 gr ....................................................................................................................... 9.25HCB52 .680 Diameter, 467 gr ....................................................................................................................... 9.25HCB53 .682 Diameter, 475 gr ....................................................................................................................... 9.25HCB54 .690 Diameter, 482 gr ....................................................................................................................... 9.25HCB55 .710 Diameter, 538 gr ....................................................................................................................... 9.25HCB56 .727 Diameter, 575 gr ....................................................................................................................... 9.25HCB57 .735 Diameter, 585 gr ....................................................................................................................... 9.25HCB58 .740 Diameter, 595 gr ....................................................................................................................... 9.25

61

BULLETS & LUBES

SA131 JAVELINA BULLET LUBE. 50/50 Alox-Pure Beeswax. Hollow Stick, (Fits Luber Sizer) ...... 3.75SA131S JAVELINA BULLET LUBE, As above, 6 or more, Each Stick ..................................................... 3.25SA131A JAVELINA SCHUETZEN BULLET LUBE.75/25 Alox/Pure Beeswax, 1 Pound stick ........... 24.00SA132 S.P.G. BULLET LUBE. Special Formulation For Blackpowder .................................................... 4.75SA132A SPG LUBE - BULK BLOCK, ¾ POUND .................................................................................... 32.00SA132B SPG LUBE – BULK BLOCK, 1 ½ POUND ................................................................................ 54.00SA146 PURE BEESWAX. Yellow Color, Approximately One Pound Block ....................................... 15.00SA146A PURE BEESWAX. Yellow Color, Convienent 1 ½ oz Size .......................................................... 2.50SA175 ALOX LIQUID BULLET LUBE, 4 Oz BOTTLE .......................................................................... 7.50SA176 OX YOKE WONDER WADS, PRELUBED, 44/45 CAL - 45/70, 100pcs ................................. 8.00SA176A OX YOKE WONDER WADS, PRELUBED, 36/40 CAL - 40/70, 100pcs ................................. 8.00SA177 OX YOKE WONDER LUBE, MUZZLE LOADING PATCH BULLET LUBE .......................... 8.00SA212 OX YOKE WONDER SEALS, .44 Cal, Fits Over Ball to Prevent Chain Fire, 100 pieces ...... 11.25SA213 OX YOKE WONDER SEALS, .36 Cal, Fits Over Ball to Prevent Chain Fire, 100 pieces ...... 11.25SA186 HORNADY .451 ROUNDBALL, Box 100 pieces ...................................................................... 12.25SA186A HORNADY .375 ROUNDBALL, Box 100 pieces ...................................................................... 12.25SA187 HORNADY .454 ROUNDBALL, Box 100 pieces ...................................................................... 12.25SA188 HORNADY .457 ROUNDBALL, Box 100 pieces ...................................................................... 12.25SA189 HORNADY .570 ROUNDBALL, Box 50 pieces ........................................................................ 12.25

SA131, SA131ASA132SA132A

SA132B

SA175

SA186, SA186A,SA187,

SA188, SA189

SA177 SA176, SA176A

SA212SA213

POWDER FLASKS

The Following Flasks are From the Colt Continuation SeriesF2044 1860 ARMY FLASK, Embossed with stand of flags, Brass Sprout, Repro ............................... 26.00F8006 .36 POCKET FLASK, Embossed with Eagle, Brass Sprout, Repro ........................................... 26.00F8007 .36 NAVY FLASK, Embossed with stand of flags. Brass Slant Spout, Repro ........................... 26.00F8008 .44 DRAGOON FLASK, Embossed with stand of flags. Plunger Spout, Repro ....................... 33.00

The Following Flasks Are Manufactured by David PedersoliF8020 REMINGTON .36 PISTOL FLASK, Repro .................................................................................. 32.00F8030 REMINGTON .44 PISTOL FLASK, Repro .................................................................................. 32.00F8080 ZOUAVE RIFLE POWDER FLASK. (PEACE FLASK) Clasped Hands in Circle of Stars Over

Cannons, Flags And Shield With US, Surmounted By Eagle. 7" High, With 65 Grain Spout AndSpring Loaded Powder Cutoff. Use With Mississippi, Zouave or .58 Musket, Repro .............. 45.00

F8040 COLT REVOLVER POWDER FLASK. .36 Caliber, Repro ........................................................ 32.00F8050 COLT REVOLVER POWDER FLASK. .44 Caliber, Panoplay of Cannon, Flags and Sword

Surmounted by Crossed Rifles and Pistols. Spring Loaded Powder Cutoff. Brass Spout And TopRing, Japanned Finish. Brass Body. 6" High, Reproduction ..................................................... 32.00

F8080F8040F8050

F8020F8030

F8006

F8007 F2044F8008

62

A-2B 58 CALIBER PLASTIC SHOOTING TUBES, BLUE, Per Hundred ........................................... 8.50A-2R 58 CALIBER PLASTIC SHOOTING TUBES, RED, Per Hundred ............................................. 8.50A-2Y 58 CALIBER PLASTIC SHOOTING TUBES, YELLOW, Per Hundred .................................... 8.50CC1 MAYNARD, .50 CALIBER STANDARD LOAD, Each ............................................................... 2.75CC1A MAYNARD, .50 CALIBER REDUCED LOAD, 28 GRAINS 2FF, Each .................................... 2.75CC1B MAYNARD, .36 CALIBER, Each ................................................................................................... 3.00CC2 GALLAGHER, Each ....................................................................................................................... 2.75CC3 SMITH, Each ..................................................................................................................................... 2.75CC4 BURNSIDE, Each ............................................................................................................................ 5.25CC6 SPENCER RIFLE & CARBINE , ALL MODELS. Fabricated of Copper Colored Injection

Moulded Plastic. Use with Shotgun Primer ONLY, NO POWDER REQUIRED. Reusable. 35Pieces .............................................................................................................................................. 36.00

CC9 45-90 BRASS, STARLINE BRAND, Box of 20 .......................................................................... 36.00CC10 50/70 GOVERNMENT BRASS, 50 Pieces .................................................................................. 92.00CC11 56/50 SPENCER CASES, 50 Pieces ............................................................................................ 92.00CC12 .50 CAL SMITH CASES, Plastic, Reusable, 50 pieces ............................................................... 29.00CC13 .50 CAL MAYNARD CASES, Plastic, Reusable, 50 pieces ....................................................... 32.00

CC1LT LOADING TOOL FOR MAYNARD CASES, Machined Brass ................................................ 38.00CC2LT LOADING TOOL FOR GALLAGHER CASES, Machined Brass ............................................. 38.00CC3LT LOADING TOOL FOR SMITH CASES, Machined Brass, with Base ........................................ 38.00

CARTRIDGE CASES

CIVIL WAR CARTRIDGE RELOADING TOOLS

NORTH-SOUTH SKIRMISH ASSOCIATIONIf you are one of the millions of Americans with an interest in Civil War or blackpowder shooting,

the North-South Skirmish Association is for you. Ft. Shenandoah, the Association’s home range, is located onseveral hundred acres of land in the rolling hills of the lower Shenandoah Valley just outside of Winchester, Va.The shooting competition in the N-SSA is done with live ammunition at both paper targets for individual scoreand at various breakable targets with 5 or 8 man team events. Matches are with musket, carbines, repeating rifles,revolvers, cannon and mortar. The N-SSA is comprised of regional divisions that host their own skirmishes.Twice a year, once in May and again in October, Ft. Shenandoah is host to the Association’s National Skirmish.For further information visit www.n-ssa.org

SIGHT PROTECTORS

SA207-1 SIGHT PROTECTOR, Brass w/ clamping nut, 2 Band Enfield ................................................... 15.00SA207-2 SIGHT PROTECTOR, Brass w/ clamping nut, 3 Band Enfield, Springfield, 50/70 Trapdoor .. 15.00SA207-3 SIGHT PROTECTOR, Brass w/ clamping nut, Model 1855 Rifle, Remington Zouave ............. 15.00SA207-4 SIGHT PROTECTOR, Brass w/ clamping nut, Model 1841 Mississippi .................................. 15.00SA207-5 SIGHT PROTECTOR, Brass w/ clamping nut, Sharps and Spencer Rifles or Carbines ............ 15.00SA207-6 SIGHT PROTECTOR, Brass w/ clamping nut, Henry Rifle ........................................................ 22.00SA207-7 SIGHT PROTECTOR, Brass w/ clamping nut, 2 Band Springfield, Smith Carbine ................... 15.00SA207-8 SIGHT PROTECTOR, Brass w/ clamping nut, Burnside, Starr, Maynard, Gallagher Carbines 15.00

63

CLEANING RODS & ACCESSORIES

SA104 RAMROD PULLER. Cam Action, With Leather Jaw Linings .................................................. 28.00SA110 .58 CALIBER BALL SCREW. Blued Steel (Reproduction) ........................................................ 8.00SA110A 1816-1842 .69 CALIBER BALL SCREW (Reproduction) .......................................................... 9.50

The following cleaning rods have aluminum shafts, Nylon muzzle guides with brass tip jags to hold the patch.Tips are threaded to accept our SA121, 122 bronze brushes. Turned hardwood handle

SA116 .58 CALIBER, 3 Band Musket Length, 42" .................................................................................. 22.00SA117 .58 CALIBER, 2 Band Musket Length, 34 1/2" ......................................................................... 22.00SA118 .58 CALIBER, Carbine Length, 28 1/2" ....................................................................................... 22.00SA119 .54 CALIBER, Carbine Length, 28 1/2" ....................................................................................... 22.00SA120 .50 CALIBER, Carbine Length, 24" .............................................................................................. 22.00SA127 .69 CALIBER, Cleaning Rod. Same Construction As SA116 Except 46" Long ..................... 22.00SA127A .72 CALIBER, Cleaning Rod, 46” Long ...................................................................................... 22.00SA127B .75 CALIBER, Cleaning Rod, 46” Long ...................................................................................... 22.00SA128 .44/.45 CALIBER, Wood Handled, Brass Shaft & Jag Cleaning Rod With Nylon Muzzle with steel

ferrule is pinned to shaft. A shouldered nylon guide protects the muzzle. Designed For Use OnHenry and Trapdoor Rifles and Carbines. ................................................................................... 22.00

The Following SA116-50 Thru SA116-75 Jags fit our Aluminum Cleaning Rods and offer the versatility ofmultiple cleaning tips without having to buy multiple rods.

SA116-50 .50 CALIBER JAG ........................................................................................................................... 4.50SA116-54 .54 CALIBER JAG ........................................................................................................................... 4.50SA116-58 .58 CALIBER JAG ........................................................................................................................... 4.50SA116-69 .69 CALIBER JAG ........................................................................................................................... 4.50SA116-72 .72 CALIBER JAG ........................................................................................................................... 4.50SA116-75 .75 CALIBER JAG ........................................................................................................................... 4.50SA121 .58 CALIBER, Bronze Bore Brush .................................................................................................. 3.00SA121A .58 CALIBER, Bore Brush, Stainless Steel for Aggressive Cleaning ........................................... 4.00SA122 .69 CALIBER, Bronze Bore Brush .................................................................................................. 3.00SA122A .75 CALIBER, Bronze Bore Brush, Fits SA127 and other rods .................................................... 3.00SA123 .54 CALIBER, Bottom Scraper. Fits SA119 (Removes Fouling On Breech Plug) ...................... 5.00SA124 .58 CALIBER, Bottom Scraper. Fits SA116-118 (Removes Fouling On Breech Plug) ............. 5.00SA125 .69 CALIBER, Bottom Scraper. Fits SA127 (Removes Fouling On Breech Plug) ...................... 5.00SA126 .58 CALIBER, Bottom Scraper. Fits Our Brass Ram Rods Listed In Catalog ............................. 5.00SA139 PATCHPULLER. Fits Hoppes Shotgun Rods ............................................................................... 6.50SA140 PATCHPULLER. Fits our Brass Loading Rods ............................................................................ 6.50SA141 PATCHPULLER. Fits our Wood Handle Cleaning Rods ............................................................. 6.50SA142 .44 CAL. PISTOL CLEANING ROD. Brass Bore and Cylinder Jags, Aluminum Grip ............ 24.00SA142A .44 BRUSH, Phosper Bronze, Fits Above Rod .............................................................................. 3.00SA143 .36 CAL. PISTOL CLEANING ROD. Brass Bore and Cylinder Jags, Aluminum Grip ............ 24.00SA143A .36 BRUSH, Phosper Bronze, Fits Above Rod .............................................................................. 3.00SA147 CLOTH CLEANING PATCH. Size 2 ½” X 2 ½”, 1000 Piece Pack ........................................... 15.00SA148 CLOTH CLEANING PATCH. Size 2” X 2”, 1000 Piece Pack ................................................... 15.00SA148A CLOTH CLEANING PATCH. Size 3” X 3”, 1000 Piece Pack ................................................... 17.00

SA140

SA104

SA110SA110A

SA116, SA117, SA118, SA119, SA120, SA127, SA127A, SA127B

SA142, SA143

SA139SA141

SA121, SA121A, SA122,SA122A, SA142A, SA143A

SA123-SA126

SA116-50 - SA116-75

64

SA112 BROWNELL ACRAGLAS GEL BARREL BEDDING KIT. Contains 2 Part Epoxy Resin,Release Agent, Resin Dye, Measuring Cups & Spoons. Detailed Instructions ........................ 24.75

SA112A SAME AS ABOVE ACRAGLAS, Thinner consistency than gel ............................................... 24.75SA114 LIN-SPEED GUNSTOCK AND FINISH OIL. For Complete Refinishing or Touch up ............ 9.25SA133 KASENIT Hardening Compound. For Rehardening Soft Internal Parts, Springs & Frizzens .. 15.00

SA112, SA112A SA114SA133

LEATHER CARE PRODUCTS

SA135 LEATHER BELT PUNCH. Revolving Turret Has Six Hole Punchers In Varying Sizes ........... 9.00SA194 PECARD SHOE OIL AND LEATHER CONDITIONER. Liquid Version of famed PECARD

Paste Type Conditioner. Will Not Mar Original Finish, Dries To Touch. 8 Oz. Dispenser ...... 7.50SA195 PECARD HARNESS OIL AND LEATHER CONDITIONER. Finest Liquid Compound For

Oiling And Cleaning Leather Horse Tack. Waterproofs, And Protects32 Oz. Plastic Jug. ..... 22.50SA196 PECARD LEATHER CONDITIONER. Paste Type Leather Cleaner And Dressing Suitable For

Preserving And Softening The Finest Leather Items In Your Collection. Will Not Marr OriginalFinish And Dries To The Touch. 6 Oz. Plastic Tub ....................................................................... 7.50

SA197 SAME AS SA196, EXCEPT FORMULATED FOR ANTIQUE LEATHER ................................ 7.50SA197A SAME AS ABOVE, Except formulated for Saddles and will not irritate horses skin ................. 7.50SA198 LEXOL LEATHER CONDITIONER. Softens, Cleans And Preserves Leather. Leaves Absolutely

No Residue Or Oily Film. Leather Can Be Dyed, Waxed, Or Whitened After Use. Safe OnPreviously Dyed Leather. This Is The Only Product Endorsed By Leading Museums AndHistorical Societies For Use In Caring Of Antique Leather Goods. 1 Liter (35.8 Fl. Oz.) PlasticContainer ......................................................................................................................................... 16.50

SA198A AS ABOVE, 8 oz. size ...................................................................................................................... 7.50SA199 LEXOL LEATHER CLEANER. Companion Product To Lexol Conditioner. Used To Clean

Leather Prior To Preservative Treatment. Safe For Use On Finest Leather Goods. Removes GrimeAnd Dirt In Complete Safety. 1 Liter (35.8 Fl. Oz.) Plastic Container. ...................................... 16.50

SA199A AS ABOVE, 8 oz. size ...................................................................................................................... 7.50

SA135

SA194 SA195

SA196 SA197

SA198, SA199SA198ASA199A

SA197A

GUN CARE PRODUCTS

65

SA158 LUBRIPLATE WHITE GREASE, 1 ¾ Oz TUBE .......................................................................... 5.75SA179 BIRCHWOOD CASEY ANTI SIEZE COMPOUND, ¾ Oz Tube for Nipples, Breechplugs, etc 6.00SA200 NEVR-DULL ALL METAL POLISH. Cotton Wadding Leaves No Residue. Superb Polish That

Absolutely Does Not Scratch the Finest Surface. Tear Off A Piece Of The Wadding And Rub OnFor A Brilliant Cleaning And Shine. Generous Large 5 Oz. Can ................................................ 6.25

SA215 OX YOKE ANTI SIEZE LUBE, For Nipples, Breechplugs, etc ................................................. 10.75SA226 INLETTING/PARTS FITTING DYE, Used to check fit on metal parts and stock inletting.

“Prussian Blue” by Permatex, Non Drying Formula ..................................................................... 5.75

GUN CARE PRODUCTS

SA129

SA134

SA149SA150

SA155SA156

SA200

SA158

SA129 BIRCHWOOD CASEY PLUM BROWN. 5 Oz Bottle of Browning Solution ............................ 9.75SA130 BIRCHWOOD CASEY SUPER BLUE. 3 Oz Bottle of Bluing Solution .................................... 8.00SA130A BIRCHWOOD CASEY BRASS BLACK. 3 Oz BOTTLE FOR BRASS, COPPER, BRONZE .. 8.00SA130B BIRCHWOOD CASEY ALUMINUM BLACK METAL FINISH. 3 Ounce Bottle of Blackening

Solution for Use on Aluminum. ....................................................................................................... 8.00SA130C 44/40 GUN BLUE, Original Formula. Best Instant Blue for Steel on the Market, 2oz Bottle . 10.95SA130D BIRCHWOOD CASEY BLUE & RUST REMOVER, 3 Oz Bottle ............................................... 8.00

SA134 KROIL PENETRATING OIL. 8 Oz Can. Absolutely the Best Penetrating Oil Available ....... 9.50SA149 SHOOTER’S CHOICE BORE CLEANER. 4 Ounce Bottle ....................................................... 10.50SA150 SHOOTER’S CHOICE LEAD REMOVER. 4 Ounce Bottle ...................................................... 10.50SA150A SHOOTER’S CHOICE COPPER REMOVER. 8 Ounce Bottle .................................................. 11.75SA155 6 Oz BALLISTOL AEROSOL ........................................................................................................ 8.00SA156 16 Oz BALLISTOL LIQUID ........................................................................................................... 9.25SA232 HOPPES 9 NITRO POWDER SOLVENT, “Worlds Most popular Gun Cleaner” 5 Oz ............. 6.25SA233 HOPPES 9 BLACKPOWDER SOLVENT & PATCH LUBRICANT ........................................... 7.25

SA130 SA130A SA130BSA130C

SA150A

SA179 SA215

SA226

SA130D

SA232

SA233

UNCATALOGED ITEMSPlease note we have listed only items that we have in sufficient quantity. We do have many “single” itemsand parts that are unlisted. All we ask is for a S.A.S.E. and on a separate sheet of paper a brief but specific

request. We will respond to your request on items available, or will hold your request until we can supply it.All this is without obligation for you to purchase.

66

58S138A BREECH PLUG WRENCH. Fits 1855 thru 1889 Springfield .................................................. 30.0058S156 SPRINGFIELD MUSKET NIPPLE. Blued Steel (Reproduction) .............................................. 5.0058S219 MUSKET REAR SIGHT WRENCH. Twin Pin Spanner ............................................................. 10.00SA108L REVOLVER NIPPLE WRENCH. .44 & .36, Open End, T Handle ............................................ 11.00SA108S AS ABOVE BUT FOR SMALLER MODEL REVOLVERS ........................................................ 11.00SA166 “T” HANDLE MUSKET NIPPLE WRENCH ............................................................................ 11.00

58S138A

58S219

SA103

SA108LSA108SSA166

SA136

SA137 SA183SA138

SA183A

SHOOTING ACCESSORIES

SA103 12 PIECE NEEDLE FILE SET. Assorted Shapes, Vinyl Pouch, Imported ................................. 8.50SA137 HOLLOW PUNCH SET. 6 Sizes. 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16. Use On Leather And

Other Soft Material. Comes In A Plastic Pouch ............................................................................ 5.00SA138 PIN PUNCH SET. 4 Sizes. 1/16, 7/32, 1/8 and 5/32. Hardened Steel W/Plastic Pouch ......... 6.00SA183 MUSKET AND TRAPDOOR LOCKPLATE TAP, Cuts New or Restores Original Threads ... 14.00SA183A MUSKET & TRAPDOOR DIE, 1” Round die, Cuts New or Restores ramrod & screw threads 24.00SA229 SHARPS CHAMBER SLEEVE REMOVAL TOOL .................................................................... 22.00

SA217 G96 GUN TREATMENT OIL, Cleans, Lubricates, Protects, 12oz Aerosol ................................ 9.95SA218 G96 GUN TREATMENT OIL, Cleans, Lubricates, Protects, 4.5oz Aerosol ............................... 6.95SA219 G96 GUN TREATMENT OIL, Cleans, Lubricates, Protects, 4.5oz Non-Aerosol ...................... 4.75SA220 G96 GUN DEGREASER, Cleans metal surfaces prior to blueing. 4oz ........................................ 3.50SA221 G96 GUN BLUE, Creme formula wips on, bonds to original finish. 3oz .................................... 7.95SA222 G96 LINSEED OIL STOCK FINISH, Dries quickly. Gunsmith quality. 2.5oz .......................... 5.25

GUN CARE PRODUCTS

SA217 SA218 SA219 SA220 SA221 SA222

SA115 MAINSPRING VISE. CW Military Pattern. Modern Made ...................................................... 24.00SA136 BRASS HEADED HAMMER. Hardwood handle. 2 0z. Head, 8 1/2" Long ............................. 3.00SA153 6” DIAL CALIPER, STAINLESS STEEL .................................................................................. 22.00SA214 B-SQUARE PROFFESIONAL GUNSMITH SCREWDRIVER SET, 32 pieces, Includes Slotted,

Phillips, Hex, Torx Tips. Magnetized with Non Slip Grip Handles .......................................... 21.00SA228 MAGLITE SOLITARE. Great Bore Light, Fits Most Muzzleloaders & Bolt Action Rifles ....... 8.00

SA115

SA214

SA153

SA228

SA229

67

SA210

SHOOTING ACCESSORIES

SA144 EAR PLUGS. Poly Foam with Cord, Disposable, Poly Bagged .................................................... .50SA201 HOPPES STANDARD SAFETY GLASSES, Will fit over prescription glasses, yellow tint ... 7.50SA208 HEARING PROTECTORS, Adjustable fit, muff type, “DEFGUARD” By Radians ................... 8.00SA209 REMINGTON SHOOTING GLASSES, w/Clear, Grey, & Yellow Lenses & Carrying Case .... 29.50SA224 EARPLUGS, Do It Yourself Kit, Custom Moulded, with Instructions, Orange ....................... 21.00

SA145 “BRIGHT SIGHT” FRONT SIGHT PAINT. Available in Orange, Red, Green, White, Yellow. DriesQuickly, Long Lasting, Screw Top Bottle. Specify Color ............................................................. 5.50

SA145A “BRIGHT SIGHT” PROFESSIONAL SIGHT PAINT KIT WITH CLEANER. Contains One EachOrange, Red, Green, White, Yellow Paint, With Cleaner and Applicator. ................................ 22.25

SA157 MERIT SHOOTERS EYEPIECE .................................................................................................. 65.00SA159A LYMAN HAWKEYE SHOOTERS OPTIC AID, Suction Cups To Glasses, 1/16” Aperature . 24.50SA161 BIRCHWOOD CASEY SIGHT BLACK, 3.5 Oz AEROSOL CAN .............................................. 7.25SA163A SIMMONS 25 X 40 SPOTTING SCOPE, 45 DEGREE EYEPIECE WITH TRIPOD .............. 70.00SA163S SIMMONS 25 X 40 SPOTTING SCOPE, STRAIGHT EYEPIECE WITH TRIPOD ................ 70.00

SA160R .58 MUSKET AMMO BOX, RED, HOLDS 25 LOADED A2 PLASTIC SHOOTING TUBES .3.75SA210 SHOOTERS DRY BOX, Holds 100 rounds of musket or carbine ammo on two removable trays.

Includes 2 trays. Lid has o-ring seal with recessed handle ........................................................ 22.50SA211 TRAY FOR DRYBOX, Also useful as reloading blocks ............................................................... 5.50

SA201SA208 SA209

SA144 SA224

SA145

SA157 SA163ASA163S

SA161

SA159A

SA105SA105A

SA109

SA151

SA178

SA160R

SA105 BRASS BORE GAUGE. Caliber Markings On One Side, MM And Shotgun On Reverse ....... 3.50SA105A ALUMINUM BORE GUAGE. Caliber Markings On One Side, MM & Shotgun On Reverse .. 1.50SA109 U.S. ISSUE NIPPLE PICK. Fits In Cap Box (Reproduction) ...................................................... 1.00SA151 ALUMINUM GUN CASE, 62” Long 12” Wide 4 ½” Height, Fits 3 Band Musket .............. 325.00SA178 MASTER LOCK TRIGGER LOCK, 3 Digit Combo Lock .......................................................... 13.50SA180 TARRED CANVAS GUN BAG, with Tie Strings, Waterproofed, 60 inches long fits Muskets 14.00SA181 CANVAS GUN BAG, with Tie Strings, Waterproofed, 60 inches long fits Muskets ................ 12.00SA216 PISTOL CAPPING TOOL, Straight Line Capper, For #10 or #11 Pistol Caps ....................... 12.00SA223 CO2 DISCHARGER, Used to Clear Fouled or Loaded Muzzleloaders ..................................... 36.00

SA211

SA216

SA223

SA145A