COLOURS LanyonBrickSPECIFICATION REFERENCE: NBS PLUS: F10 BRICK/ BLOCK WALLING 215 CONCRETE FACING...
Transcript of COLOURS LanyonBrickSPECIFICATION REFERENCE: NBS PLUS: F10 BRICK/ BLOCK WALLING 215 CONCRETE FACING...
Specials Available
Very Low Risk of Efflorescence
Very Low Water Absorption
Frost Resistant
COLOURS fi
ne cast brick
Lanyon®
colo
urs
DEPTHS
65Millimetres 215 x
102.5 mm
FINISH
Age
Aged
COLOURS
Lanyon® Brick distinctive, reclaimed look with rumbled corners
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015
ELMWOOD
WESTBURY
ORANMORE
All the colours shown above are stock items.
SPECIFICATION REFERENCE: NBS PLUS: F10 BRICK/ BLOCK WALLING 215 CONCRETE FACING BRICKWORK BS EN 771-3: 2011
SUSTAINABILITYEnergy Use 100% renewableWater Used 90% rain water harvestingRecyclable 100% of this product can be
recycledManufacturing Produced in the UK from locally
sourced materialsWaste Wood + Plastic: 100% recycledCarbon Footprint We have a new state-of-the-art
washing plant which enables AG to produce bricks from 100% reclaimed waste aggregate. Please contact our Technical Specification Department if you are interested in specifying such a product.
BREEAM ‘A+’ Rating – in accordance with the BRE Green Guide to Specification.
Information for a specific colour is available on request from our Technical Specification Department.
ADVICE + GUIDANCE
For advice and guidance on ordering, installation, good site practice, etc. visit our website: professional.ag.uk.com/advice+guidance
For maintenance guidance and health and safety advice visit our website: professional.ag.uk.com/maintenance
FEATURES + BENEFITS
• Rumbled corners give an appealing ‘reclaimed’ look.
• Very low occurence of efflorescence.
• Distinctive contrast of colours.
• Dimensionally accurate.
• Low wastage levels.
• Frost resistant.
• Complimentary specials available.
AG RECOMMENDATIONS
Colour blending
Products should be mixed on site from a minimum of 3 packs to help reduce the effect of banding.
Mortar Ratio
Recommended ratio 6 : 1 or 5 : 1 (Sand : OPC).
Lanyon® is supplied with distressed, round edges.
EDGES
FINISHES
Rumbling process achieves the finish of an old reclaimed brick with all of the benefits of new brick.
Specials Available
Frost Resistant
Very Low Risk of Efflorescence
Very Low Water Absorption
TECHNICAL INFORMATIONfi
ne cast brick
Lanyon®
technical inform
ation
DEPTHS
65Millimetres 215 x
102.5 mm
FINISH
Age
Aged
Lanyon® Brick distinctive, reclaimed look with rumbled corners
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015
Specials Available
Frost Resistant
Very Low Risk of Efflorescence
Very Low Water Absorption
STOCK + MANUFACTURING INFORMATION fi
ne cast brick
Lanyon®
stock info
rmatio
n
Lanyon® Brick distinctive, reclaimed look with rumbled corners
DEPTHS
65Millimetres 215 x
102.5 mm
FINISH
Age
Aged
Lanyon® facing bricks are manufactured by using advanced manufacturing processes and natural materials. PLANT OF MANUFACTURE (POM):Made at our Toome Production Plant. All products are manufactured from natural materials and although we strive to provide consistency of colour, variation may occur in the manufacturing process - this applies to all concrete products within the industry.
ISO 9001 Quality Management.ISO 14001 Environmental Management.ISO 45001 Occupational Health and Safety Management.CE Marking Download our Declaration of Performance (DOP)
data at: www.ag.uk.com/cemarking
CERTIFICATIONMANUFACTURING
STOCK INFORMATION
NB. In stock items requiring over 10,000 no. bricks are treated as made to order.MTO - made to order (minimum order size 10,000 no. bricks).Supplied on pallets. 280 units per half pack.
TECHNICAL INFORMATION
Producttype
Length(mm)
Depth(mm)
Height(mm)
InStock
Available Colours
Units per pack
Unit weight(kg)
Weight per pack (t)
Packs per 8 wheeler
Packs per unit lorry
FACING BRICK 215 102.5 65 YES Elmwood / Oranmore / Westbury 520 3 kg 1.6 t 10 16
MANUFACTURING
STANDARD
BS EN 771-3: 2011+A1 : 2015Attestation Level 2+
COMPRESSIVE STRENGTH* 22 N / mm2
WATER ABSORPTION 8% max
DURABILITY DESIGNATION F2 Severe Exposure
ACTIVE SOLUBLE SALTS [SO3] 0.03%
SIZE TOLERANCEBS EN 771-3: 2011 (T1)Category D3
GROSS DENSITY 2200 Kg / m3
THERMAL CONDUCTIVITY 1.56 W / m.K
INITIAL RATE OF ABSORPTION 0.42 Kg / m2.m-1
BOND STRENGTH 0.15 N / mm2
REACTION TO FIRE A1 Class
TYPE OF MORTARRecommended ratio 6 : 1 or 5 : 1Sand : OPC
WATER VAPOUR PERMEABILITY [u] 5 / 15u tabulated from EN 1745
PACK QUANTITY 520
PACK SIZE [APX. MM] 900 x 1100 x 950mm
TYPICAL PACK WEIGHT 1600 Kg
PACKAGING (FULL SHRINK BAG) Pallet
* Compressive strength in accordance with PD 6697 : 2010 and Eurocode 6.
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015