Duo 24 S CKU03-5050 (US) / CKE03-5050 (EU)

USER MANUAL

1

Introduction

Thank you for purchasing the ColorKey Duo 24 S. Please read these instructions carefully

before use. Operating this fixture according to these instructions is important to avoid any

possible damage or accidents caused by misuse.

Packing list n 1x Duo 24 S fixture

n 1x Power cord

n User Manual

Safety

Caution! Opening this unit voids warranty. Contact ColorKey for any service requests. Warning! To avoid electrical shock, be sure to disconnect power before any service or when moving or setting up the fixture. Caution! Avoid direct eye exposure with the fixture when on.

• This fixture is for indoor use only.

• This fixture must be installed a minimum distance of 5 meters (16’4”) away from any lighted objects.

• Do not install or operate this fixture near flammable materials.

• This device must be installed, operated, and maintained by a qualified professional.

• Do not touch the fixture with bare hands during operation as the surface temperature of the fixture can

exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to cool before attempting to touch

it.

• Please check if the voltage is in accordance with the rated power before installing.

• Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power

cord of similar rating.

2

Display Operation

• MENU: Access the menu/Scroll through menu options

• ENTER: Open/Select the current menu option

• UP: Scroll through menu selection or parameter increase

• DOWN: Scroll through menu selection or parameters decrease

DMX Values

10 Channel

Channel (CH10)

Value Description

1 0-255 Pan 2 0-255 Tilt 3 0-255 Tilt (360˚) 4 0-255 Red1 Red2 ON 5 0-255 Green1 Green2 ON 6 0-255 Bule1 Bule2 ON 7 0-255 White1 White2 ON 8 0-255 Strobe, fast to slow 9 0-255 Brightness, dark to bright

10 0-255 AUTO

3

12 Channel Channel (CH12)

Value Description

1 0-255 Pan 2 0-255 Tilt 3 0-255 Tilt (360˚) 4 0-255 Pan/Tilt speed (fast to slow) 5 0-255 Red1 Red2 ON 6 0-255 Green1 Green2 ON 7 0-255 Bule1 Bule2 ON 8 0-255 White1 White2 ON 9 0-255 Strobe, fast to slow

10 0-255 Brightness, dark to bright 11 0-255 Beam alignment 12 0-255 AUTO

20 Channel

Channel (CH20)

Value Description

1 0-255 Pan 2 0-255 Tilt 3 0-255 Tilt (360˚) 4 0-255 Pan/Tilt speed (fast to slow) 5 0-255 Red1 ON 6 0-255 Green1 ON 7 0-255 Bule1 ON 8 0-255 White1 ON 9 0-255 Red2 ON

10 0-255 Green2 ON 11 0-255 Bule3 ON 12 0-255 White4 ON 13 0-255 Strobe, fast to slow 14 0-255 Brightness, dark to bright 15 0-255 Beam alignment 16 0-255 Manual color change 17 0-255 Color Macro speed (slow to fast) 18 0-255 Pan/Tilt Macro 19 0-255 Pan/Tilt Macro speed 20 0-255 AUTO

4

Menu Guide & Operation

DMX address 001 - 512 Channel Mode 10 ch

12 ch 20 ch

Slave mode Master Slave 1 Slave 2

Showtime mode Show 0 – Show 4 AUTO mode Non AUTO

AUTO Sound active mode On – Off Sound sensitivity 000 – 100 Stop mode Stop

Start Beam alignment Stda (Standard)

StGE (Stage) Tv (TV) ArAL (Architectural) tHAL (Theatrical)

Pan Inversion Yes - No Tilt Inversion Yes - No Black Light On - Off Dislplay Inverse disp - dsip Auto Test Test MENU test Pan

Tilt Red1 Green1 Blue1 White1 Red2 Green2 Blue2 White2 Dimmer Strobe

White balance Red1 Green1 Blue1 Red2 Green2 Blue2

Reset Reset

5

Function Value Percent / Setting Mode

10CH Mode 12CH

Mode 20CH

Pan 000-255 0~100% 1 1 1 Tilt 000-255 0~100% 2 2 2 Tilt (360˚) 000-127 Null 3 3 3

128-189 Counter clockwise, fast to slow 190-193 No movement 194-255 Clockwise, slow to fast

Pan/Tilt speed 000-255 Fast to slow 4 4 Red 1 000-255 0~100% 4 5 5 Green 1 000-255 0~100% 5 6 6 Blue 1 000-255 0~100% 6 7 7 White1 000-255 0~100% 7 8 8 Red 2 000-255 0~100% 4 5 9 Green 2 000-255 0~100% 5 6 10 Blue 2 000-255 0~100% 6 7 11 White 2 000-255 0~100% 7 8 12 Flashing strobe

000-007 OFF 8 9 13 008-015 ON 016-131 Flashing slow to fast 132-139 ON 140-181 Fast OFF, slow ON 182-189 ON 190-231 Fast ON, slow OFF 232-239 ON 240-247 AUTO flashing 248-255 ON

Brightness 000-255 0~100% 9 10 14 Dim Modes

000-020 Standard 11 15 021-040 Stage 041-060 TV 061-080 Architecture 081-100 Studio 101-255 Default

Color 000-007 Null 16

008-011 Color 1 012-015 Color 2 016-019 Color 3 020-022 Color 4 023-026 Color 5 027-030 Color 6

6

Function Value Percent / Setting Mode 10CH

Mode 12CH

Mode 20CH

Color 031-034 035-037 038-041 042-045 046-048 049-052 053-056 057-060 061-063 064-067 068-071 072-075 076-078 079-082 083-086 087-089 090-093 094-097 098-101 102-104 105-108 109-112 113-115 116-119 120-123 124-127 128-131 132-135 136-139 140-143 144-147 148-151 152-155 156-159 160-163 164-167 168-171 172-175 176-179 180-183 184-187 188-191 192-195 196-199

Color 7 Color 8 Color 9 Color 10 Color 11 Color 12 Color 13 Color 14 Color 15 Color 16 Color 17 Color 18 Color 19 Color 20 Color 21 Color 22 Color 23 Color 24 Color 25 Color 26 Color 27 Color 28 Color 29 Color 30 Color 31 Color 32 Color Macro 1 Color Macro 2 Color Macro 3 Color Macro 4 Color Macro 5 Color Macro 6 Color Macro 7 Color Macro 8 Color Macro 9 Color Macro 10 Color Macro 11 Color Macro 12 Color Macro 13 Color Macro 14 Color Macro 15 Color Macro 16 Color Fade Macro 1 Color Fade Macro 2

16

7

Function Value Percent / Setting Mode

10CH Mode 12CH

Mode 20CH

Color 200-203 204-207 208-211 212-215 216-219 220-223 224-227 228-231 232-235 236-239 240-243 244-247 248-251 252-255

Color Fade Macro 3 Color Fade Macro 4 Color Fade Macro 5 Color Fade Macro 6 Color Fade Macro 7 Color Fade Macro 8 Color Fade Macro 9 Color Fade Macro 10 Color Fade Macro 11 Color Fade Macro 12 Color Fade Macro 13 Color Fade Macro 14 Color Fade Macro 15 Color Fade Macro 16

16

Color Macro speed

000-255 Slow to fast 17

Pan/Tilt Macro

000-015 016-035 036-055 056-075 076-095 096-115 116-135 136-155 156-175 176-195 196-215 216-235 236-255

NULL Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12

18

Pan/Tilt speed

000-255 Slow to fast 19

Mode 000-069 Null 10 12 20 070-079 Blackout during Pan/Tilt 080-089 Null 090-099 Blackout during color change 100-179 Null 180-189 AUTO 190-199 Null 200-209 Reset 210-249 Null 250-255 Sound Active/Music

8

DMX Connections

Ø DMX Cable：

The Duo 24 S can be controlled via DMX using a 3-pin XLR connection. The standard

DMX connection is XLR is: one end connects to the male plug, and the other connects to the

female. As below: pin 1: ground, pin 2: negative signal, pin 3: positive signal

Noted：In order to avoid failures and interference signal transmission，we connect a

resistance120Ω （ 1/4W ） at the end of the DMX connecting as below:

Ø The Conversion between 3 pin and 5 pin XLR

If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable

9

Master/Slave Mode Operation

Master/Slave

Master/Slave mode allows you to connect multiple units together using one (1) unit to control

others in a chain. When a fixture is set to ‘Master Mode,’ this unit will always act as a

controlling unit until it is switched out of ‘Master Mode’. The Master unit will send out signal

via DMX to Slave units which will react in synchronization. When a fixture is set into ‘Slave

Mode’, this fixture will receive the Master signal. To avoid master signal and DMX signal

interference, do not connect DMX when using Master/Slave mode. If using a DMX run

longer than 60 meters and/or over 32 units, a signal amplifier may be required.

Troubleshooting

Problem Solutions

No DMX control

u Make sure that the DMX cable is properly connected

u Make sure that the DMX controller is operational

u Check the DMX cable for tears or breaks

u Make sure that the fixture is in DMX mode

Fixture does not respond to sound

u Make sure that the fixture is in Sound Active mode.

10

Technical Information Power supply: AC90-240V - 50/60Hz, 2A

Power rating: 24W

Light source: 2x12W RGBW 4-IN-1 LED diode

Life span: Up to 50,000 hours

Beam angle: 40˚

Channel: 10/12/20

Control: Auto, Sound active, DMX512, Master/slave

Display: Digital LCD display

3-pin XLR connections for DMX or Master/Slave chain

Weight: 5.7lbs (2.6kg)

Notice to consumer: ColorKey offers a 1-year limited warranty. Please visit our website at

www.ColorKeyLED.com to register your product.

Please note: As we continue to work towards improving our products and your experience

as a user, we recommend that you check our website periodically for updates to user

manuals and specifications at www.ColorKeyLED.com or you may contact us directly at

info@colorkeyled.com.