COLOR GUIDE EMBRACE THE GRIDeglassr.com/wp-content/uploads/2015/03/2015-Citadel-Color-Guide.pdfCOLOR...
Transcript of COLOR GUIDE EMBRACE THE GRIDeglassr.com/wp-content/uploads/2015/03/2015-Citadel-Color-Guide.pdfCOLOR...
The grid structure of a cladding system creates an inherent design opportunity to express a number of visual statements. From the subtilty of a monolithic approach to the attention-grabbing look of Mondrian-inspired elements, this simple combination of lines and color offers endless possibilities. So embrace the grid, andthen highlight it with color!
A
B
C
D
E
COLOR GUIDE
Citadel Architectural Products, Inc.
3131-A North Franklin RoadIndianapolis, Indiana 46226phone (317) 894-9400 • (800) 446-8828fax (317) 894-6333 • (800) 247-2635www.citadelap.com • [email protected]
CLADDING SYSTEMS & GLAZING PANELS
©2015 Citadel Architectural Products, Inc. All Rights Reserved.Panel 15®, SinoCore®, ProCore™, Panel 20®, and Envelope 2000® are trademarks of Citadel Architectural Products, Inc.Kynar 500® is a registered trademark of Arkema, Inc. Duranar® and ULTRA-COOL® are registered trademarks of PPG Industries, Inc.Printed In The U.S.A. 04/15
SERIES A,D D - color coatB - pretreatmentA - aluminum skin
• economical choice for coatings
• durable, hard surface• available in a wide range of colors
Thermosetting paint systemapplied with similar techniquesto PVDF (based on volume).
SERIES B
SERIES F,G
SERIES H
SERIES H
SERIES I,J
Pa
nel
15
®
Sin
oC
ore
®
Pro
Co
reT
M
Pa
nel
20
®
En
velo
pe 2
00
0® R
V /
DR
V
Gla
zeG
ua
rd®
AVAILABILITY BY PRODUCT
En
velo
pe 2
00
0® R
R /
RS
• • •
• • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
1-Coat1
Textured/SmoothPolyester
TYPE COMPOSITIONCATEGORY FEATURES & BENEFITS DESCRIPTION
D - color coatC - primerB - pretreatmentA - aluminum skin
• used for premium/custom colors
• similar in performance to polyester• good gloss retention and weatherability
Two-component cross-linkedsystem applied withelectrostatic or conventionalspray equipment.
1-CoatTexturedAcrylic Urethane
D - color coatC - primerB - pretreatmentA - aluminum skin
• industry benchmark for quality
• unsurpassed color retention, chemical resistance and fi lm erosion resistance
Heat-set coating using 70%Kynar 500® or Hylar 5000®
resins.
2-CoatSmoothPVDF
(mica)
(metallic)
D - color coatC - primerB - pretreatmentA - aluminum skin
• metallic look without metal fl ake
• performance same as standard 2-coat smooth PVDF
Heat-set coating using 70%Kynar 500® or Hylar 5000®
resins with mica fl akes.
2-CoatSmoothPVDF
E - clear coatD - color coatC - primerB - pretreatmentA - aluminum skin
• similar in performance to 2-coat PVDF with additional clear coat
coat for extra protection• contains actual metal fl ake
Heat-set coating using 70%Kynar 500® or Hylar 5000®
resins with metal fl akes.
3-CoatSmoothPVDF
• nickel/hydrate seal• colorant2
• aluminum oxide• barrier• aluminum skin
• not an anodic look or paint,
but a true integral anodized aluminum to match storefront and window extrusions
Transparent or colored oxidizedfi nish integral to the basealuminum induced withelectricity and chemicals.
IntegralAnodized
Clear Coat (0.60 to 0.70 mil)
Color Coat (0.75 to 0.80 mil)
Primer (0.20 mil)
Pretreatment
Aluminum Skin (0.010" to 0.040")
•
•
1 - Primer is present on Polar White and Battleship Grey.2 - Clear Satin Anodized does not use a colorant.3 - Series C and Series E have been discontinued.
EMBRACE THE GRID...
YEAR30
WARRANTY
YEAR5
WARRANTY
YEAR30
WARRANTY
YEAR20
WARRANTY
89 87 85 59 37 30
ULTRA-COOLULTRA-COOL®®
DURANARDURANAR®®
CoatingsCoatings
80 66 64
37 31 30
0
32 33 37 45 30 23
42 29 26 4 27
72 57 47 26 28 42
53 59 39 46
17 16 19 3 22 29
32
SILVERGREY
MEDIUMBRONZE
SLATEGREY
SANDSTONE SIERRATAN
CHARCOALGREY
SKYBLUE
BRANDYWINEREGALBLUE
REGALRED
COLONIALRED
TERRACOTTA
PATINAGREEN
HEMLOCKGREEN
HARTFORDGREEN
MANSARDBROWN
SHERWOODGREEN
EBONY
SERIES A: Standard Textured Polyester (.010")
ARCTICWHITE
BONEWHITE
RESERVEWHITE
SANDSTONE
SILVERGREY
PUEBLOBEIGE
SLATEGREY
SIERRATAN
CHARCOALGREY
MEDIUMBRONZE
EBONY
SHASTAWHITE
STATUARYBRONZE
SKYBLUE
PATINAGREEN
REGALBLUE
HEMLOCKGREEN
TERRACOTTA
REGALRED
SHERWOODGREEN
COLONIALRED
HARTFORDGREEN
BRANDYWINE
MANSARDBROWN
SERIES F: Standard Kynar 500® (.024")
SERIES G: Premium Kynar 500® (.024")
SILVERMETALLIC
ATLANTICSUNRISE (MICA)
PLATINUM(MICA)
CHAMPAGNEMETALLIC
PEWTER
CHAMPAGNEBRONZE (MICA)
GUN METAL(MICA)
DESERTSAND (MICA)
LIQUIDCOPPER (MICA)
NORTH SEAMIST (MICA)
CLEAR SATINANODIZED
BLACKANODIZED
MEDIUM BRONZEANODIZED
DARK BRONZEANODIZED
SERIES H: Standard Kynar 500® Mica/Metallic (.024")
SERIES I: Standard Anodized (.024")
SERIES J: Premium Anodized (.024")
Custom Kynar 500® Mica/Metallic
POLAR WHITE(48" ONLY)
CLASSICWHITE
BATTLESHIP GREY(48" ONLY)
CLASSICBRONZE
METALLICSILVER
SERIES D: Standard Smooth Polyester (.024")
STOCK POLYESTER FINISHES STOCK PVDF FINISHES STOCK PVDF FINISHES
STOCK ANODIZED FINISHES
CUSTOM / NON-STOCK FINISHES(continued)
CHAMPAGNEANODIZED
HIGH GLOSSWHITE
METALLICSILVER
SHASTAWHITE
PUEBLOBEIGE
STATUARYBRONZE
CLASSICBRONZE
BONEWHITE
SERIES B: Premium Textured Acrylic Urethane (.010")
Durable yet budget-friendly. These fi nishes offer excellent durability while providing a more economical alternative. Available in a wide range of colors, the textured fi nishes help conceal any dings or dents and the smooth fi nishes provide an alternate option for glazing infi ll.
Guaranteed performance just got better. As an industry benchmark, Kynar 500® coatings have long been known for quality and durability. Now, these coatings have become even better with the introduction of ‘cool’ technology providing enhanced performance for longer... guaranteed.
The beauty of color, the shine of metal. Mixing mica or metallic fl akes within the paint coatingallows the base color to offer additional pop, bringing depth to the building elevation. This look is further enhanced by the way in which these fl akes refl ect the light from different viewpoints.
An additional degree of expression. From metallic paints to specialty fi nishes and ‘natural’ metals, these custom offerings provide a variety of ways to add another layer of visual dimension to any elevation.Or, take that unique approach even further with a wood grain fi nish to bring warmth and depth.
no min quantity, no set-up charge 2 week standard lead time
no min quantity, no set-up charge 2 week standard lead time
no min quantity, no set-up charge 2 week standard lead time
minimum quantity varies, set-up charges may apply lead time varies
Actual anodized aluminum. These fi nishes are chemically and electrically produced (not just ananodic-look paint), and offer an excellent complement to storefont and glazing system extrusions.
- Indicates ULTRA-COOL® color. - Indicates the Solar Refl ectivity Index (SRI). Higher numbers means greater refl ectivity and less heat gain. - Indicates a directional, lot-specifi c material. When specifying material for a project, panels with these fi nishes must be installed in all the same direction (180° not acceptable).
greater solar refl ectivity increased energy effi ciency exceptional color stability superior chalk and fade resistance
SILVERSTORM(MICA)
MEDIUM GRAY(MICA)
DRIFTWOOD(MICA)
DARK BRONZE(MICA)
RUSSET PEARL(MICA)
COPPERCANYON (MICA)
STAINLESS STEEL(48" WIDE ONLY)
QUARTZ-ZINC®
(39.25" WIDE ONLY)COPPER(48" WIDE ONLY)
LONGBRUSHED
RUSTED STEEL(36" WIDE ONLY)
Moldings are not available in these fi nishes.
These decorative fi nishes are on an .032” aluminum substrate. Grain patterns are available in both light (LT) and dark (DK) versions.
BARREL OAK - LT(48" ONLY)
MOUNTAIN PINE - LT(48" ONLY)
HERITAGE OAK - DK(48" ONLY)
HAMPTON TEAK - DK(48" ONLY)
MILLWORK CHERRY - LT(48" ONLY)
HEIRLOOM CHERRY - DK(48" ONLY)
NORTHWEST FIR - DK(48" ONLY)
Anodized fi nishes are Exterior Standard No. 1 Class I or Class II anodizing is available as a premium custom fi nish. However, the warranty remains the same
and fabrication diffi culties will result (increased crazing, cracking) due to the fi lm thickness.
NOTE: Series C and Series E have been discontinued.
Custom Specialty Finishes Custom Metals
Custom Wood Grain Finishes
Custom Anodized Finishes
MATTE BRUSHEDANODIZED
LIGHT ZINCANODIZED
DARK ZINCANODIZED
COPPER PENNYANODIZED
Need a custom color to match your standard? 1) submit your color sample to our sales staff, 2) approve the resulting color match, and then 3) the order will be ready to ship in 4 to 6 weeksfor quantities less than 7,500 sq ft, or 8 to 10 weeks for quantities greater than 7,500 sq ft.
Moldings are available (batten profi les only) in the same grain pattern.
Moldings are not available in these fi nishes.