Coil CoatingsCoatings 8Bat

download Coil CoatingsCoatings 8Bat

of 1

Transcript of Coil CoatingsCoatings 8Bat

  • 7/26/2019 Coil CoatingsCoatings 8Bat

    1/1

    Elementis SpecialtiesNo. 120 Jalan Kapar 27/89Megah Indah IndustrialParkSection 2740400 Shah AlamSelangor, MalaysiaTel: +603 519 228 87

    Elementis SpecialtiesP.O. Box 700Hightstown, NJ 08520USATel: + 1-609 443 2500Fax: + 1-609-443 2422

    Elementis SpecialtiesPegasus ParkDe Kleetlaan 12 A Bus 31831 Diegem BelgiumTel: + 32.2.790.76.00Fax: +32.2.790.76.60

    Technical Hotline: US +1 609 443 2216

    EU +49 221 485 2913

    Elementis System Proposi tionCoil Coatings 8B

    Epoxy or Polyurethane TopcoatUpdated: 28 February 2005 * means product has no global registration (see registration page)

    Function Product % Use Characteristics

    NUOSPERSEFX 365* 0,2 1,0Nonionic, polymeric wetting and dispersing agent.First choice for organic pigments. Low foaming.

    Pigment Wetting

    & Anti-Floating

    NUOSPERSEFX 600* 0,2 2,0Polymeric dispersing agent. Excellent pigment dispersion andstabilisation, first choice for inorganic and hydrophilicpigments. Extremely low foaming.

    Flow Levelling

    Substrate WettingDAPROW 77 0,25 - 1,0

    Highly efficient universal interfacial tension modifier.Silicone and Alkyl Phenol Ethoxylate free.

    DAPRODF 11810,05 0,2 Especially effective in preventing foam during pigment

    grinding.

    Foam Suppressors

    DAPRODF 900 0,2 0,6Long term and cost effective air release. Optimum results areoften achieved with DF 1181 in the mill base.

    SLIP-AYDSL 181 1,0 - 3,0

    Good abrasion and blocking resistance.May cause gloss reduction.

    SLIP-AYDSL 2951 1,0 4,0

    Good resistance to blocking and abrasion.Very fine grind for high gloss.

    Surface Conditioner

    SLIP-AYDSL 5301 1,0 3,0

    Exceptional resistance to blocking and abrasion.May cause gloss reduction.

    BENTONE LT 0,1 1,0Thixotropic thickening gives good levelling. Requires highshear dispersion. Can reduce gloss level.High rest viscosity brings sag control and suspension.

    RHEOLATE244 0,4 - 2,0

    Good colorant acceptance.Excellent levelling after spraying. Use in combination with lowshear thickener.Good film build.

    RHEOLATE266 0,2 2,0Spray and dip applications.Exceptionally high package viscosity and levelling.Does not influence gloss or transparency.

    Rheology Modifier

    RHEOLATE310 0,3 2,0Use when RHEOLATE266 is not effectiveExcellent flow and levelling

    TINT-AYDNV

    Effective colorants for Low VOC Industrial and Maintenance applications.Surfactant-free to prevent diminished performance in highly tinted systems.Lowest VOC system less than 15 g/l.

    Colorant System

    TINT-AYDCW

    Binder-free colorant system with high compatibility in all waterborne systemsEasy to handle freeze/thaw stable.Low VOC system - 200-300 g/l.

    1Might influence the efficiency of associative thickeners in this formulation.

    The information in this publication is intended to serve as guide but is not necessarily complete and is given without warranty. We recommend all users to determine the suitability of our productsfor their intended uses and caution them to comply with statutory obligations and to avoid infringing rights of third parties. We encourage users to contact us to discuss problems involving ourproducts in order to facilitate their use. 19/03/05