CO₂A green Compressor– clean thinking …

MAKING MODERN LIVING POSSIBLE

REFRIGERATION & AIR CONDITIONING DIVISION

CO₂ valve for lightcommercial applications

Filter drier forcommercial applications

as more and more major soft drinks manufacturers demand improved energy efficiency and environmental perform-ance, they are increasingly looking for refrigerant alternatives to HFCs. CO₂ has proved itself a good alternative, creating an excellent, cost-effective solution to this challenge.

Vending machines:

Heat pumps:

Produced by Danfoss A/S ©, Danfoss Industri Service – G1 Advertising 06.10.UF.JN.paaDEHC.PB.550.A1.02 / 520N0361 compressors.danfoss.com

air or ground sourced heat pumps are highly responsive to energy savings. Compact, lightweight and high-perform-ance designs can be made to deliver high thermal efficiency. By introducing CO₂ as a refrigerant, heat pumps achieve even better results, making CO₂ a good solution for this type of application.

CO₂ Compressor– tailored for light commercial applications and heat pumps

Our ultra-efficient new CO₂ reciprocating compressor was created in response to increasing customer interest in alternative refrigerants, especially for bottle coolers, vending machines and heat pumps.

This was a special challenge, but one that our engineers responded to with imagination and energy. The unique thermodynamic properties of CO₂ mean that using it as a refrigerant at ambient temperatures above 30°C is tricky. The transcritical system operations required meant we had to create not only a capable compressor, but also a new system control strategy and heat exchanger concept.

In designing our new CO₂ compressor, we developed a special mechanical expansion valve to optimise process operation for the widest possible range of ambient temperature conditions. At the same time, it acts as an internal relief valve, adding to the systems safety.

Product advantages Customer benefits

• Low noise level

• Environmentally friendly natural refrigerant

• Low energy consumption

• High cooling capacity

• High COP

• High product quality

• Technology innovation

Test conditionsDischarge pressure 90 barGas cooler outlet temp. 20°CSuction gas temperature 20°Ambient temperature 32°C

• Low sound emission

• CO₂ is a natural gas and has no impact on the environment

• Low running cost

• Ensures the quality of your product

• Increases innovation in customer’s own product

Refr

iger

ant

Volt

age

Freq

ency

Com-pressor

Code no

Capacity [W] Power

consumptionCOP [W/W]

Evaporating temperature [°C]

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 -35 -10 5 -35 -10 5

CO₂

220-

240V

50H

z

TN1406 106B0001 335 405 455 483 574 680 733 288 291 1,41 2,34

TN1410 106B0002 573 692 779 827 981 1162 1253 428 432 1,62 2,69

TN1416 106B0003 1006 1214 1366 1450 1721 2039 2198 706 715 1,72 2,85

115V

60H

z TN1410 106B0004 712 860 967 1027 1219 1444 1556 538 545 1,6 2,65

TN1416 106B0005 1187 1433 1612 1711 2031 2406 2594 851 863 1,68 2,79

CO₂ Compressor– tailored for light commercial applications and heat pumps

Our ultra-efficient new CO₂ reciprocating compressor was created in response to increasing customer interest in alternative refrigerants, especially for bottle coolers, vending machines and heat pumps.

This was a special challenge, but one that our engineers responded to with imagination and energy. The unique thermodynamic properties of CO₂ mean that using it as a refrigerant at ambient temperatures above 30°C is tricky. The transcritical system operations required meant we had to create not only a capable compressor, but also a new system control strategy and heat exchanger concept.

In designing our new CO₂ compressor, we developed a special mechanical expansion valve to optimise process operation for the widest possible range of ambient temperature conditions. At the same time, it acts as an internal relief valve, adding to the systems safety.

Product advantages Customer benefits

• Low noise level

• Environmentally friendly natural refrigerant

• Low energy consumption

• High cooling capacity

• High COP

• High product quality

• Technology innovation

Test conditionsDischarge pressure 90 barGas cooler outlet temp. 20°CSuction gas temperature 20°CAmbient temperature 32°C

• Low sound emission

• CO₂ is a natural gas and has no impact on the environment

• Low running cost

• Ensures the quality of your product

• Increases innovation in customer’s own product

Refr

iger

ant

Volt

age

Freq

ency

Com-pressor

Code no

Capacity [W] Power

consumptionCOP [W/W]

Evaporating temperature [°C]

-45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 -35 -10 5 -35 -10 5

CO₂

220-

240V

50H

z

TN1406 106B0001 335 405 455 483 574 680 733 288 291 1,41 2,34

TN1410 106B0002 573 692 779 827 981 1162 1253 428 432 1,62 2,69

TN1416 106B0003 1006 1214 1366 1450 1721 2039 2198 706 715 1,72 2,85

115V

60H

z TN1410 106B0004 712 860 967 1027 1219 1444 1556 538 545 1,6 2,65

TN1416 106B0005 1187 1433 1612 1711 2031 2406 2594 851 863 1,68 2,79

CO₂A green Compressor– clean thinking …

MAKING MODERN LIVING POSSIBLE

REFRIGERATION & AIR CONDITIONING DIVISION

CO₂ valve for lightcommercial applications

Filter drier forcommercial applications

as more and more major soft drinks manufacturers demand improved energy efficiency and environmental perform-ance, they are increasingly looking for refrigerant alternatives to HFCs. CO₂ has proved itself a good alternative, creating an excellent, cost-effective solution to this challenge.

Vending machines:

Heat pumps:

Produced by Danfoss A/S ©, Danfoss Industri Service – G1 Advertising 06.10.UF.JN.paaDEHC.PB.550.A1.02 / 520N0361 compressors.danfoss.com

air or ground sourced heat pumps are highly responsive to energy savings. Compact, lightweight and high-perform-ance designs can be made to deliver high thermal efficiency. By introducing CO₂ as a refrigerant, heat pumps achieve even better results, making CO₂ a good solution for this type of application.