CN081 Section Reference Index - Digi-Keydkc3.digikey.com/PDF/CN081/SectL.pdfAll Prices are in US...

All Prices are in US Dollars! Toll-Free: 10800-1527031 (China Telecom - ) — 10800-8527031 (CNCG - )

digikey.com.cn — Telephone: (852) 3104 0500 — Fax: (852) 3104 0686 (CN081)

CN081 Section Reference IndexConnectors, Cable Assemblies, IC Sockets . . . . . . . . . . . . . . . . . . . . . 26-506 ASMT

INCLUDES

Active RF Product and Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507-559 BSMTINCLUDES

Semiconductors, ICs, Transistors, Diodes, Rectifiers . . . . . . . . . . . . . . 560-1289 CSMTINCLUDES

Crystals, Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1290-1350 DSMTINCLUDES

Inductors, Coils, Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1351-1476 ESMTINCLUDES

Resistors, Potentiometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1744-1853 GSMTINCLUDES

Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1477-1743 FSMTINCLUDES

Circuit Protection, Components and PTC Thermistors . . . . . . . . . . 1854-1931 HSMTINCLUDES

Wire, Cable & Access., Buzzers, Mics, Speakers . . . . . . . . . . . . . 2109-2141 J

Switches, Relays, Electromechanical . . . . . . . . . . . . . . . . . . . . . . . 1932-2108 ISMTINCLUDES

Prototyping, Tools, Solder, Test Equipment . . . . . . . . . . . . . . . . . . 2142-2227 KSMTINCLUDES

Transformers, Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2258-2327 MSMTINCLUDES

Sensors, Industrial Controls and NTC Thermistors . . . . . . . . . . . . . 2328-2405 NSMTINCLUDES

Optoelectronics, LEDs, LCDs, Lasers, Displays . . . . . . . . . . . . . . . 2406-2496 OSMTINCLUDES

3.6ECSI

0

Batteries, Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2228-2257 LSMTINCLUDES

All Prices are in US Dollars! Toll-Free: 10800-1527031 (China Telecom - ) — 10800-8527031 (CNCG - )digikey.com.cn — Telephone: (852) 3104 0500 — Fax: (852) 3104 06862228 (CN081)

L

† Non-extending positive terminals. ▲ See “Ordering Information” for note on shipping charges on prepaid orders.

† Non-extending positive terminals. ▲ See “Ordering Information” for note on shipping charges on prepaid orders. ‡ Use dT/dt charge termination method.

Nickel-Metal Hydride Batteries and Tabbed Versions

The Panasonic nickel-cadmium battery is a rechargeable sealed nickel-cadmium

alkaline cell.

Features:

• Long life • Excellent discharge char ac teristics • Long shelf life • High-rate

charging • Wide temperature range • Reliable, self-resealing vent • Sealed,

strong, leakproof con struction

Applications:

For Cyclic Use: • Con sumer ap pli ca tions • Office equipment • Tools • Photo-

gra phy • Toys and Hobby

For Trickle or Float Charge Use: • Emergency devices • Memory back-up

Special Purpose Batteries:

Rapid Charge “R” Type: The “R” type cell has a specially improved negative

plate with increased gas absorption characteristics. It can be subjected to

controlled charging at the 1C rate and rapid-charge in 1 to 1.5 hours is possible.

Notes:

• Recycling information available on Digi-Key website.• See following page for Battery Pack information.

Digi-Key is not approved by any state or federal agency as an authorized supplier of product for med ical, life support or life sustaining devices or systems.

Nickel Cadmium Batteries

Features:

• Superior Energy Density: Nickel-metal hydride batteries have

approximately double the capacity com pared with Panasonic’s standard

Ni-Cad batteries

• High Cycle Life: Like Ni-Cad batteries, nickel-metal hydride batteries can

be repeatedly charged and discharged up to approximate 500 cycles (under

ideal conditions).

Because a specially designed charger will be necessary, please consult

the Panasonic Technical Handbook (P001-ND) regarding the charge

system • Flat trickle charge cannot be used • Excellent Discharge Character istics: Since the internal resistance of nickel-metal hydride batteries

is low, continuous high-rate discharge up to 3C (10C for 4/5SC, SC) is

possible in the same way as for Ni-Cad batteries. • Excellent Reliability: Self-discharge performance is the same or better than that of nickel-cadmium

batteries. In addition, charging batteries after extended storage restores

original battery capacity. Battery safety has also been improved and verified

through testing under a wide range of conditions of use.

Applications:

• Communication • Office Automation • Audio Visual Equipment • Other

High-Tech Products.

Caution for Safety:Improper usage may cause battery liquid leakage, heat generation or

explosion, resulting in equipment failure or injury • Do not disassemble or

rework the battery • Do not solder the battery directly • Do not use new

batteries together with old batteries, or different type batteries mixed together

• Follow the specified charge conditions.

“H” Type: • Improved low rate charge characteristics at higher temperatures.

• Ideal for back-up applications (with appropriate charge control circuitry).

Notes:• Battery Packs made with NIMH Cells include a thermostat from Texas

Instrument.• Nickel-metal hydride batteries are not a drop-in replacement for Ni-Cad

batteries.• Recycling information available on Digi-Key website.• See following page for Battery Pack information.

It is the responsibility of each user to ensure that each battery appli cation

system is adequately designed safe and compatible with all conditions

encountered during use, and in confor mance with existing standards and

requirements.

P001-ND NIMH Technical Handbook . . . . . . . . . $2.95

Capacity Dimensions Std. Chg. (Control Req.) (Regular Version) (Solder Tabbed Version) C/5 Inch (mm) Weight▲ @ 16hrs. Quick Charge Digi-Key Pricing Digi-Key Pricing Panasonic Size (V) (mAh) Dia. x Height oz. (gram) (mA) (mA) (hrs.) Part No. 1 10 Carton Part No. 1 10 Carton Part No.

AAA 1.2 700 0.41 x 1.75 (10.5 x 44.5) 0.46 (13) 70 650 1.2 P213-ND† 2.88 25.88 2380.50/1380 P213T-ND 3.18 28.58 2628.90/1380 HHR-70AAAB8

AAA 1.2 700 0.41 x 1.75 (10.5 x 44.5) 0.42 (12) 70 450 1.7 P008-ND 3.33 29.93 2753.10/1380 P008T-ND 3.63 32.63 3001.50/1380 HHR-75AAA

4/5AA 1.2 1150 0.57 x 1.69 (14.5 x 43.0) 0.81 (23) 115 1150 1.2 P013-ND† 3.53 31.73 1692.00/800 P013T-ND 3.83 34.43 1836.00/800 HHR-120AA

AA 1.2 1500 0.57 x 1.97 (14.5 x 50.0) 0.92 (26) 150 1500 1.2 P015-ND† 3.60 32.40 1728.00/800 P015T-ND 3.80 34.20 1824.00/800 HHR-150AA

AA 1.2 1550 0.57 x 1.97 (14.5 x 50.0) 0.95 (27) 155 1500 1.2 P060-ND 4.00 36.00 1920.00/800 P060T-ND 4.30 38.70 2064.00/800 HHR-160AA

AA 1.2 2000 0.57 x 1.99 (14.5 x 50.5) 1.02 (29) 200 1200 2 P220-ND 4.48 40.28 2148.00/800 P220T-ND 4.78 42.98 2292.00/800 HHR-210AA

4/5A 1.2 2000 0.67 x 1.71 (17.0 x 43.5) 1.20 (34) 200 2000 1.2 P010-ND† 5.35 48.15 1733.40/540 P010T-ND 5.65 50.85 1830.60/540 HHR-200A

A 1.2 2100 0.67 x 1.97 (17.0 x 50.0) 1.34 (38) 210 2100 1.2 P017-ND† 6.20 55.80 2678.40/720 P017T-ND 6.50 58.50 2808.00/720 HHR-210A

4/3A 1.2 3700 0.67 x 2.64 (17.0 x 67.0) 1.87 (53) 370 2000 ‡ P018-ND† 7.43 66.83 1603.80/360 P018T-ND 7.73 69.53 1668.60/360 HHR-380A

4/3A 1.2 4200 0.72 x 2.64 (18.2 x 67.0) 2.12(60) 420 2000 ‡ P214-ND† 9.83 88.43 2358.00/300 P214T-ND 10.13 91.13 2430.00/300 HHR-450A

4/5SC 1.2 2000 0.91 x 1.34 (23.0 x 34.0) 1.48 (42) 200 2000 1.2 P020-ND† 6.88 61.88 1980.00/480 P020T-ND 7.18 64.58 2066.40/480 HHR-20SCPY14

SC 1.2 2450 0.91 x 1.69 (23.0 x 43.0) 1.94 (55) 260 2600 1.2 P641-ND 6.35 57.15 1828.80/480 P641T-ND 6.35 57.15 1828.80/480 HHR-26SCPY01

SC 1.2 3000 0.91 x 1.69 (23.0 x 43.0) 1.94 (55) 300 3000 1.2 P021-ND† 9.20 82.80 2649.60/480 P021T-ND 9.50 85.50 2736.00/480 HHR-30SCPY20

D 1.2 6500 1.30 x 2.39 (33.0 x 60.8) 6.00 (170) 650 6500 1.2 P019-ND† 23.53 211.73 1882.00/100 P019T-ND 23.83 214.43 1906.00/100 HHR-650D

D 1.2 8250 1.30 x 2.40 (33.0 x 61.0) 6.00 (170) 900 4500 2.4 P640-ND 24.23 218.03 1938.00/100 P640T-ND 24.53 220.73 1962.00/100 HHR-900DA01

“H” Type

AAA 1.2 500 0.41 x 1.75 (10.5 x 44.5) 0.46 (13) 50 250 2.4 P634-ND† 2.98 26.78 2463.30/1380 P634T-ND 3.28 29.48 2711.70/1380 HHR-60AAAH

A 1.2 1900 0.67 x 1.97 (17.0 x 50.0) 1.34 (38) 210 — — P635-ND† 6.85 61.65 1479.60/360 P635T-ND 7.15 64.35 1544.40/360 HHR-210AH

A 1.2 3200 0.72 x 2.64 (18.2 x 67.0) 2.12 (60) 330 1650 2.4 P636-ND† 11.33 101.93 4077.00/600 P636T-ND 11.63 104.63 4185.00/600 HHR-330APH

A 1.2 3500 0.72 x 2.64 (18.2 x 67.0) 2.12 (60) 370 1750 2.4 P637-ND† 11.38 102.38 4095.00/600 P637T-ND 11.68 105.08 4203.00/600 HHR-370AH

SC 1.2 2500 0.91 x 1.69 (23.0 x 43.0) 1.94 (55) 250 1250 2.4 P638-ND† 10.08 90.68 2901.60/480 P638T-ND 10.38 93.38 2988.00/480 HHR-250SCH

C 1.2 3100 1.02 x 1.97 (25.8 x 50.0) 2.82 (80) 300 1500 2.4 P639-ND† 9.08 81.68 2776.95/510 P639T-ND 9.38 84.38 2868.75/510 HHR-300CH

Capacity Dimensions Std. Chg. Quick C/5 Inch (mm) Weight▲ @ 16hrs. Charge Digi-Key Pricing Panasonic Size (V) (mAh) Dia. x Height oz. (gram) (mA) (mA) (hrs.) Part No. 1 10 Pkg. Carton Part No.

Regular Version

Rapid Charge “R” Type

4/5SC 1.2 1,200 0.89 x 1.34 (22.5 x 34.0) 1.34 (38) 120 1200 1.5 P200-ND† 3.44 30.94 288.75/120 858.00/480 P-120SCJS/A02

D 1.2 5,000 1.30 x 2.40 (33.0 x 61.0) 5.11 (145) 500 5000 1.5 P283-ND 13.61 122.47 533.41/56 1188.75/168 P-500DS/A03

Solder Tabbed Version

Rapid Charge “R” Type

4/5SC 1.2 1,200 0.89 x 1.34 (22.5 x 34.0) 1.34 (38) 120 1200 1.5 P200T-ND 3.74 33.64 313.95/120 932.88/480 P-120SCJS/A02T

D 1.2 5,000 1.30 x 2.40 (33.0 x 61.0) 5.11 (145) 500 5000 1.5 P283T-ND 13.91 125.17 545.17/56 1214.96/168 P-500DS/A03T

Digi-Key is not approved by any state or federal agency as an authorized supplier of product for medical, life support or life sustaining devices or systems.

All Prices are in US Dollars! Toll-Free: 10800-1527031 (China Telecom - ) — 10800-8527031 (CNCG - )digikey.com.cn — Telephone: (852) 3104 0500 — Fax: (852) 3104 0686 (CN081) 2229

L

Battery PacksFor Memory Backup, Power Tools,

Radio Controlled and Other Endless Applications

All battery packs are made using our suppliers’ high quality cells. Shown are standard

configurations. If you have a special need or a configuration that you do not see,

give us a call for further information. Packs are available in nearly all sizes of Nickel-

Cadmium, NIMH, Alkaline and Carbon Zinc cylinder batteries.

Note: Recycling information available on Digi-Key website.


† Voltage increments of 1.5 volts are used for Alkaline and Carbon Zinc packs.

HOW TO ORDER:P □ □ □ – □ □ □ □ – NDN □ □ □ – □ □ □ □ – NDSY □ □ □ – □ □ □ □ – ND

Select Style of Battery Pack From Chart

Select Digi-Key Part No. of any Cylinder

Type Battery

Call for pricing on any standard or custom battery pack

Using: Panasonic Cells:

Energizer Cells:

Sanyo Cells:

Nickel-Metal Hydride Chargers and Rechargeable Batteries

‡ Package of two ▲ See “Ordering Information” for note on shipping charges on prepaid orders. † Includes 4AA 2200mAh NIMH Batteries

Capacity Dimensions (Regular Version) (Solder Tabbed Version) C/5 Inch (mm) Weight▲ Digi-Key Pricing Digi-Key Pricing Energizer Size (V) (mAh) Dia. x Height oz. (gram) Part No. 1 10 Carton Part No. 1 10 Carton Part No.

Batteries AAA 1.2 850 0.413 x 1.752 (10.50 x 44.50) 0.5 (13) N704-ND 2.55 22.95 1356.60/1,000 — — — — NH12VP AA 1.2 2,500 0.571 x 1.988 (14.50 x 50.50) 1.1 (30) N703-ND 4.08 36.68 1173.60/480 N703T-ND 4.38 39.38 1260.00/480 NH15VP C 1.2 2,500 26.2 x 1.969 (26.20 x 50.0) 2.3 (66) N702-ND‡ 14.13 76.28/6 271.20/24 N702T-ND‡ 14.43 77.90/6 276.96/24 NH35BP-2 D 1.2 2,500 1.346 x 2.421 (34.20 x 61.50) 2.6 (73) N701-ND‡ 14.13 76.28/6 271.20/24 N701T-ND‡ 14.43 77.90/6 276.96/24 NH50BP-2 9V 7.2 150 1.909 x 0.689 x 26.5 (48.50 x 17.50 x 26.50) 1.5 (42) N705-ND 10.03 90.23 1804.50/225 — — — — NH22VP

Equipped with intelligent features such as safety timers, temperature monitors and trickle charge technologies, these chargers are the smart way to keep plenty of energy on hand. Energizer is the leader in rechargeable technology, offers a complete line of high capacity batteries and technologically advanced chargers to fit any lifestyle. These batteries are engineered to work with your most advanced, high-drain devices such as digital cameras, PDAs, hand-held games, portable CD players and MP3 players. Since they are renewable and reusable, Energizer Rechargeable batteries work hard for you.



Style Volts† Cells Configurations Diagram

F021 2.4 2

F031 3.6 3

F041 4.8 4

F051 6.0 5

F061 7.2 6

F071 8.4 7

F081 9.6 8

F091 10.8 9

F101 12.0 10

F022 4.8 4

F023 7.2 6

F024 9.6 8

F025 12.0 10

Style Volts† Cells Configurations Diagram

L021* 2.4 2

L031* 3.6 3

L041* 4.8 4

L051* 6.0 5

L022 4.8 4

L032 7.2 6

L042 9.6 8

L052 12.0 10

L023 7.2 6

L024 9.6 8

L025 12.0 10

* Styles L021, L031, L041 and L051 are not available in nickel-metal hydride batteries.

Capacity Charge Dimensions Digi-Key Price Energizer Fig. Size (mAh) Time Inch (mm) Part No. Each Part No.

Chargers - RoHS Compliant 1 AA/AAA(4) 2,500/850 4.5 ~ 8 hours 3.268 x 2.992 x 1.181 (83 x 76 x 30) N310-ND 14.88 CHDCWOB 2 AA/AAA(4) 2,200/700 20 minutes 1.575 x 5.157 x 3.071 (40 x 131 x 78) N312-ND† 42.25 CH15MNCP-4 3 AA/AAA(4) 2,500/900 5.7 ~ 9 hours 5.236 x 3.504 x 1.260 (133 x 89 x 32) N314-ND NEW! 29.00 CHFMWB-4 4 AA/AAA(2) 2,500/900 1.5 ~ 5.5 hours 1.299 x 3.976 x 1.575 (33 x 101 x 40) N315-ND NEW! 20.00 CHUSBWB-2 5 AA/AAA/9V/C/D — 3 ~ 7 hours 2.835 x 7.992 x 4.370 (72 x 203 x 111) N316-ND NEW! 39.98 CHFC

Fig. 1 Fig. 2 Fig. 3 NEW! Fig. 4 NEW!

+ AA

+ AA

+ AA

+ AA

donecharging

onoff

auto shut-off

AAA • AA

Fig. 5 NEW!


L

Ni-Cd BatteriesNickel-Cadmium (Ni-Cd) batteries use nickel oxide in its positive electrode (cathode), a cadmium-compound in its negative electrode (anode), and potassium hydroxide solution in its electrolyte. The Nickel-Cadmium battery is rechargeable, so you can use it over and over.

Features: • Discharge voltage remains stable even in conditions of high-rate discharge current

– for equipment needing a high-rate discharge current, it is far more stable than other battery types

• Wide operating temperature range of -20°C ~ 60°C — operates especially well in low temperatures

• Performance does not deteriorate even after long-term storage – full recovery of original performance levels after recharging

• Designed to withstand overcharge and overdischarge – superior durability• Sealed configuration with gas release vent – easy maintenance and no leakage

• Produced using an ISO9000 certified quality control system – high quality and reliability

Applications: • Cellular phones, telecommunications equipment

• Portable audio-visual equipment

• Emergency lights

• Electric tools

• Battery-powered vehicles

Notes: • Recycling information available on Digi-Key website.• See previous page for Battery Pack information.


Volt- Capacity Dimensions Std. Charge (Control Req.) (Regular Version) (Solder Tabbed Version) age C/5 Inch (mm) Weight▲ @ 14 ~ 16hrs. Quick Charge Digi-Key Pricing Digi-Key Pricing Sanyo Size (V) (mAh) Dia. x Height oz. (gram) (mA) (mA) (hrs.) Part No. 1 10 Carton Part No. 1 10 Carton Part No.

1/3AA 1.2 110 0.55 x 0.66 (14.0 x 16.7) 0.252 (7) 11 33 4 ~ 6 SY106-ND† 1.95 17.55 2028.00/2,000 SY106T-ND 2.25 20.25 2340.00/2,000 N-110AA

2/3AA 1.2 270 0.55 x 1.16 (14.0 x 29.5) 0.49 (14) 27 81 4 ~ 6 SY107-ND† 1.78 15.98 1476.80/1,600 SY107T-ND 2.08 18.68 1726.40/1,600 N-270AA

AA 1.2 700 0.54 x 1.95 (13.8 x 49.5) 0.81 (23) 70 210 4 ~ 6 SY114-ND 1.75 15.75 840.00/1,000 SY114T-ND 2.05 18.45 984.00/1,000 N-700AAC

AA 1.2 700 0.54 x 1.90 (13.8 x 48.2) 0.81 (23) 70 210 4 ~ 6 SY115-ND† 1.75 15.75 630.00/600 SY115T-ND 1.78 15.98 852.00/1,000 N-700AACL

AA 1.2 900 0.54 x 1.95 (13.8 x 49.5) 0.81 (23) 90 1350 1 SY116-ND† 2.33 20.93 837.00/600 SY116T-ND 2.63 23.63 945.00/600 KR-900AAEC

AA 1.2 1,100 0.54 x 1.95 (13.8 x 49.5) 0.85 (24) 110 220 7 ~ 8 SY109-ND 2.58 23.18 927.00/600 SY109T-ND 2.88 25.88 1035.00/600 KR-1100AAU

2/3A 1.2 500 0.65 x 1.09 (16.5 x 27.8) 0.67 (19) 50 150 4 ~ 6 SY117-ND† 2.33 20.93 1116.00/1,000 SY117T-ND 2.63 23.63 1260.00/1,000 N-500A

4/5A 1.2 1,500 0.65 x 1.65 (16.5 x 42.0) 1.09 (31) 150 2300 1 SY110-ND† 4.20 37.80 1512.00/600 SY110T-ND 4.50 40.50 1620.00/600 KR-1500AUL

A 1.2 1,700 0.65 x 1.91(16.5 x 48.5) 1.27 (36) 170 2600 1 SY112-ND† 4.33 38.93 1557.00/600 SY112T-ND 4.63 41.63 1665.00/600 KR-1700AU

A 1.2 1,400 0.65 x 1.91 (16.5 x 48.5) 1.09 (31) 140 2100 1 SY111-ND† 3.85 34.65 1386.00/600 SY111T-ND 4.15 37.35 1494.00/600 KR-1400AE

4/5SC 1.2 1,200 0.87 X 1.30 (22.0 X 33.0) 1.52 (43) 125 375 4 ~ 6 SY118-ND† 4.05 36.45 1215.00/500 SY118T-ND 4.35 39.15 1305.00/500 N-1250SCRL

SC 1.2 1,200 0.87 x 1.65 (22.0 x 42.0) 1.62 (46) 120 — — SY126-ND† 4.23 38.03 1014.00/400 SY126T-ND 4.53 40.73 1086.00/400 KR-SCH(1.2)

SC 1.2 1,300 0.87 x 1.65 (22.0 x 42.0) 1.83 (52) 130 390 4 ~ 6 SY120-ND† 4.00 36.00 960.00/400 SY120T-ND 4.30 38.70 1032.00/400 N-1300SCR

SC 1.2 1,700 0.87 x 1.30 (22.0 x 33.0) 1.62 (46) 170 2550 1 SY119-ND 5.70 51.30 1710.00/500 SY119T-ND 6.00 54.00 1800.00/500 CP-1700SCR

SC 1.2 1,700 0.87 x 1.65 (22.0 x 42.0) 1.90 (54) 170 2600 1 SY121-ND† 4.50 40.50 1080.00/400 SY121T-ND 4.80 43.20 1152.00/400 N-1700SCR

SC 1.2 1,900 0.87 x 1.65 (22.0 x 42.0) 1.98 (54) 190 2900 1 SY122-ND† 4.73 42.53 1134.00/400 SY122T-ND 5.03 45.23 1206.00/400 N-1900SCR

5/4SC 1.2 2,300 0.87 x 1.93 (22.0 x 49.0) 2.05 (58) 230 3500 1 SY113-ND† 9.23 83.03 1660.50/300 SY113T-ND 9.53 85.73 1714.50/300 KR-2300SCE

C 1.2 2,500 0.99 x 1.93 (25.2 x 49.0) 2.61 (74) 250 — — SY128-ND 12.08 108.68 2173.50/300 SY128T-ND 12.38 111.38 2227.50/300 KR-CH(2.5)

C 1.2 3,000 0.99 x 1.93 (25.2 x 49.0) 2.96 (84) 300 4500 1 SY123-ND† 7.43 66.83 1336.50/300 SY123T-ND 7.73 69.53 1390.50/300 N-3000CR

C 1.2 3,600 0.99 x 1.93 (25.2 x 49.0) 3.14 (89) 360 5400 1 SY124-ND† 9.33 83.93 1678.50/300 SY124T-ND 9.63 86.63 1732.50/300 CP-3600CR

D 1.2 4,000 1.27 x 2.30 (32.3 x 58.4) 5.64 (160) 400 6000 1 SY125-ND 13.00 117.00 1365.00/150 SY125T-ND 13.30 119.70 1396.50/150 N-4000DRL

D 1.2 4,000 1.27 x 2.30 (32.3 x 58.4) 5.11 (145) 400 — — SY130-ND 10.80 97.20 1512. 00/200 SY130T-ND 11.10 99.90 1165.50/150 KR-DHL

D 1.2 4,400 1.27 x 2.36 (32.3 x 60.0) 5.11 (145) 440 — — SY108-ND 10.40 93.60 1092.00/150 SY108T-ND 10.70 96.30 1123.50/150 KR-4400D

F 1.2 7,000 1.27 x 3.54 (32.3 x 90.0) 8.11 (230) 700 — — SY131-ND 21.45 193.05 750.75/50 SY131T-ND 21.75 195.75 761.25/50 KR-7000F

† Non-extending positive terminals ▲ See “Ordering Information” for note on shipping charges on prepaid orders. Due to possible restrictions, a change in shipping method may be required.

† Non-extending positive terminals ▲ See “Ordering Information” for note on shipping charges on prepaid orders. Due to possible restrictions, a change in shipping method may be required.

Nickel-Metal Hydride BatteriesThe Twicell Nickel-Metal Hydride battery is a secondary battery which lasts more

than twice as long as CADNICA batteries. Twicell uses hydrogen absorbing

alloys in its negative electrode (anode) and nickel oxide in its positive electrode

(cathode).

Features:• High volumetric energy density well exceeding that of Lithium-ion batteries

• Double capacity of standard CADNICA batteries • Can be used over and over

(more than 500 times with a specific charger) • 1.2 ~ 1.6 hour quick charge with a

specific charger • Produced under a ISO9002 certified quality control systems

Applications: • Notebook computers • Cellular phones, PHS phones, telecommunications

equipment, video camera, digital still cameras, PDA, shavers, electric

toothbrushes, and various portable equipment

Notes: • Recycling information available on Digi-Key website.• See previous page for Battery Pack information.


Volt- Capacity Dimensions Std. Charge (Control Req.) (Regular Version) (Solder Tabbed Version) age C/5 Inch (mm) Weight▲ @ 16hrs. Quick Charge Digi-Key Pricing Digi-Key Pricing Sanyo Size (V) (mAh) Dia. x Height oz. (gram) (mA) (mA) (hrs.) Part No. 1 10 Carton Part No. 1 10 Carton Part No.

AAA 1.2 650 0.41 x 1.75 (10.5 x 44.5) 0.46 (13) 73 730 1.1 SY143-ND† 2.73 24.53 2501.55/1,800 SY143T-ND 3.03 27.23 2776.95/1,800 HR-AAAU

AAA 1.2 840 0.41 x 1.75 (10.5 x 44.5) 0.46 (13) 90 900 1.1 SY150-ND NEW! 3.05 27.45 1622.60/1,000 SY150T-ND NEW! 3.05 27.45 1555.50/1,000 HR-4U-900

5/4AAA 1.2 760 0.41 x 1.97 (10.5 x 50.0) 0.53 (15) 85 850 1.1 SY142-ND† 3.58 32.18 2187.90/1,200 SY142T-ND 3.88 34.88 2371.50/1,200 HR-5/4AAAU

4/5AA 1.2 1,000 0.56 x 1.69 (14.2 x 43.0) 0.81 (23) 110 1100 1.1 SY137-ND† 3.55 31.95 1133.16/600 SY137T-ND 3.85 34.65 1228.92/600 HR-4/5AAUC

AA 1.2 1,500 0.56 x 1.97 (14.2 x 50.0) 0.99 (28) 165 1650 1.1 SY144-ND† 4.28 38.48 1364.58/600 SY144T-ND 4.58 41.18 1460.34/600 HR-AAU

AA 1.2 2,000 0.57 x 1.98 (14.35 x 50.4) 1.02 (29) 210 — — SY132-ND 3.70 33.30 1181.04/600 SY132T-ND 4.00 36.00 1276.80/600 HR-3U-2100

AA 1.2 2,300 0.57 x 1.98 (14.35 x 50.4) 1.06 (30) 250 2500 1.1 SY134-ND 4.58 41.18 1168.27/480 SY134T-ND 4.88 43.88 1556.10/600 HR-3U-2500

A 1.2 1,900 0.67 x 1.97 (17.0 x 50.0) 1.41 (40) 210 2100 1.1 SY145-ND† 7.18 64.58 2290.26/600 SY145T-ND 7.48 67.28 2386.02/600 HR-AUC

4/5A 1.2 1,900 0.67 x 1.69 (17.0 x 43.0) 1.23 (35) 215 2150 1.1 SY139-ND† 5.03 45.23 1603.98/600 SY139T-ND 5.33 47.93 1699.74/600 HR-4/5AU

A 1.2 2,450 0.67 x 1.97 (17.0 x 50.0) 1.41 (40) 270 2700 1.1 SY146-ND† 5.58 50.18 1779.54/600 SY146T-ND 5.88 52.88 1875.30/600 HR-AU

4/3A 1.2 3,600 0.67 x 2.66 (17.0 x 67.5) 1.94 (55) 400 3000 1.4 SY135-ND† 7.55 67.95 1606.64/400 SY135T-ND 7.85 70.65 1670.48/400 HR-4/3AU (4.0AH)

4/3FA 1.2 4,100 0.71 x 2.66 (18.0 x 67.5) 2.19 (62) 450 3000 1.6 SY136-ND† 9.28 83.48 1480.29/300 SY136T-ND 9.58 86.18 1528.17/300 HR-4/3FAU (4.5AH)

4/5SC 1.2 1,900 0.91 x 1.32 (23.0 x 33.5) 1.66 (47) 210 2100 1.1 SY140-ND† 7.65 68.85 2034.90/500 SY140T-ND 7.95 71.55 2114.70/500 HR-4/5SCU

SC 1.2 2,700 0.91 x 1.71 (23.0 x 43.5) 2.15 (61) 300 3000 1.1 SY149-ND† 8.08 72.68 1288.77/300 SY149T-ND 8.38 75.38 1336.65/300 HR-SCU

D 1.2 6,500 1.34 x 2.33 (34.0 x 59.3) 6.17 (175) 730 5000 1.7 SY147-ND† 21.65 194.85 1948.50/150 SY147T-ND 21.95 197.55 1975.50/150 HR-D

D 1.2 8,450 1.34 x 2.33 (34.0 x 59.3) 6.28 (178) 900 5000 2.0 SY148-ND† 28.33 254.93 2549.25/150 SY148T-ND 25.95 233.55 2335.50/150 HR-DU (9.0AH)


L

The main features of lithium batteries are as follows:

• High Voltage: Nominal voltage is 3V, which is nearly double that of other batteries which use the aqueous electro lyte system, such as manganese dry bat teries, and silver-oxide batteries.

• High Energy Density: Over whelm ing ly high energy density, as compared with conventional batteries and other lithium batteries. The energy density is 5 to 10 times higher than that of manganese dry batteries.

• Long Service and Shelf Life: Since Panasonic lithium batteries are composed of chemically and thermally stable material, self-dis charge is extremely small. Deterioration when stored at room temperatures is ca. 0.5% annually – worry about deterioration is un necessary.

• Stable Flat Discharge Voltage: Since con ductive carbon is continuously formed during dis charge, internal impedance does not in crease until the end of discharge, thus stabil iz ing discharge voltage.

• Excellent Temperature Characteristics: Organic solvent ensures a low electrolyte freezing point so that the batteries can be used in a wide temperature range, -40°C ~ 85°C is standard (-40°C ~ 125°C for the High Temp erature Coin Type; -40°C ~ 70°C for Camera Type; -30° ~ 60°C for CR2004/P9A).

• BR Types versus CR Types: BR, or (CF) n/Li, batteries provide a more stable voltage particularly during the last half of discharge, while CR, or Mn02/Li, batteries provide a higher voltage during the first half. CR batteries also can provide a higher current capability than BR batteries. In storage, BR batteries perform better at high temperatures. These characteristics must be taken into con sid er ation when selecting a battery for a particular application.

• UL Approval: Panasonic Lithium batteries are UL recognized. UL File No. MH12210.

• DOT Exemption: Panasonic lithium cells and multiple cell batteries are authorized for transportation, in commerce, by U.S. shipping exemption DOT-E7052.

• Disposal Information: Panasonic lithium cells are not an EPA listed hazardous waste, but may be considered a “characteristic” hazardous waste. Lithium metal, the anode component of the cells, is considered by the U.S. EPA to be hazardous when disposed because it is reactive with water. However, a cell which contains a small quantity of lithium metal is not necessarily a hazardous waste. Disposal regulations and policies are different in each State and are subject to frequent changes. Contact your local jurisdiction for specific advice on disposal.

Digi-Key is not approved by any state or fed eral agency as an authorized supplier of prod uct for medical, life support or life sus tain ing devices or systems.

PCB Terminal Type

LITHIUMLITHIUM

LITHIUM

LITHIU M

LITHIUM

Panasonic

Panasonic

Panasonic

Panasonic

PanasonicBATTERY

BATTERY

BATTERY

BATTERY

BATTERY

3V

3V

3V3V

3V

BR-C

BR-

BR-

BR -

A

2/3 AA

2/3A

Lithium Batteries

Drain Capacity Weight* Standard Digi-Key Pricing Panasonic Fig. Type (V) (mAh) (g) (mA) Part No. 1 10 Package Carton Part No.

PCB Terminal – Coin Type

1 48 0.8 P191-ND 1.70 15.30 163.20/120 1085.28/1,200 BR1225-1HC 2 48 0.8 P192-ND 1.70 15.30 272.00/200 612.00/600 BR1225-1VC 3 120 1.6 0.03 P299-ND 1.70 15.30 204.00/150 2170.56/2,400 BR1632-1HF 4

Coin

3 190 2.5 P223-ND 1.73 15.53 220.80/160 1468.32/1,600 BR2032-1F2

5 190 2.5 P196-ND 1.73 15.53 82.80/60 621.00/600 BR2032-1HE

6 190 2.5 P197-ND 1.73 15.53 165.60/120 621.00/600 BR2032-1VB 7 165 3.2 0.03 P142-ND 1.73 15.53 82.80/60 621.00/600 BR2325-1HB 8 165 3.2 P202-ND 1.73 15.53 82.80/60 621.00/600 BR2325-1HC

(Continued)* See “Ordering Information” for note on shipping charges on prepaid orders. Due to possible restrictions, a change in shipping method may be required.

Fig. 20

Fig. 4

Fig. 15

Fig. 3

0.213.1

20.5±1

8.4

Fig. 1

Fig. 29 Fig. 30

Fig. 18

Fig. 28Fig. 27Fig. 26Fig. 25

Fig. 24Fig. 23Fig. 22Fig. 21Fig. 19

Fig. 8 (with PVC Cover)

23

Fig. 6

Fig. 14Fig. 10 Fig. 11

3

16

4.2

2.5-+

3.03.8 3.5

0.15

16

0.75

3.5

- +3.2

15.20.15

8.8

4.5

1.5

3.5

16

4

1.5

3.10.2

3.9

+ -

23 3.0

7.0 5.0

+ -

3.53.0 3.35

0.1

23

4.0

24

- +

3

3.7

20.50.2

8.9

0.75

3.5

3.5

1.8

23.1

1.8+ –

11.45

5.0

1.45

0.2

Ø22.9

3.9

5.5

24.5 1.8

5.5

-+

8.4 7.7

24.5

8.47.7

20.5

0.2

13.1

+–

3.5

2.8

1.8

3.5

24.5

2.8+ -

4.09.2

1.85.01.0

7.8

0.2

8.4

12.5

3.2

100.2

0.75

3.5

Fig. 7

23

Fig. 9 23

Fig. 5 20.5

24.5

3.5

10.20.75

0.75

3.5

- +25.5

7.7 13.1

23

3.5

10.20.75

0.753.5

+-17.8

8.93.8

12.5

Fig. 13

3.51.8

23

Fig. 12

23

Fig. 16

24.5

16

17 P.V.C. cover(yellow)

4.0

0.753.5

3.83.2

15.20.15

8.8+-

20

9

3

7.8

1.955.8

77

320

5

3.8

16

3.00.75

0.75 3.0

10.2

3.9

15.2 0.2

9.1- +3.2

Fig. 2

Fig. 31 Fig. 32

Fig. 37 Fig. 38Fig. 36Fig. 35Fig. 34 Fig. 33 Fig. 39

12.5

2.0

3.5

10.0

7.7+_

0.75

3.5

10.16

0.75

1.5

3.5

23.0

0.2

3.7

3.0

+ _

5.08

0.75

1.8

Ø16.0

Ø1.5

+_

13.0 11.5

10.0 0.15

1.6

4.0

2.4

20.0

0.2

9.0

17.8

4.0

+_

5.08

3.2

10.16

3.5

0.75

7.1

7.4520.0

+

_

3.8

5.00.15

3.2

23.0

5.4

0.2

10.8

20.5

6.1+_

2.8

3.5

1.8

3.5

1.82.8

9.2

23.0

1.5

5.0+ _

6.1

5.4

0.2

23.0

5.08

5.410.16

3.5

0.75

0.2

10.3

17.8

6.2

+_

1.8

5.0

2.8

4.0

9.2

1.0

24.5

+ _

8.4

7.8

0.2

12.5

3.8

0.75+ -

2.5

3.1

2.00.2

Fig. 17


L

Lithium Batteries (Cont.)

* See “Ordering Information” for note on shipping charges on prepaid orders. Due to possible restrictions, a change in shipping method may be required.

Drain Capacity Weight* Standard Digi-Key Pricing Panasonic Fig. Type (V) (mAh) (g) (mA) Part No. 1 10 Package Carton Part No. 9 190 2.5 P241-ND 1.73 15.53 82.80/60 621.00/600 BR2032-1GU 10

3 165 3.2

0.03 P193-ND 1.73 15.53 82.80/60 621.00/600 BR2325-1HG

11 165 3.2 P194-ND 1.73 15.53 82.80/60 621.00/600 BR2325-1VC 12 165 3.2 P195-ND 1.73 15.53 82.80/60 621.00/600 BR2325-1VG

13 6 165 6.4 0.03 P143-ND 3.55 31.95 113.60/40 852.00/400 BR2325-2HC

14 255 3.2 0.03 P243-ND 2.05 18.45 164.00/100 1090.60/1,000 BR2330-1GVF 15 255 3.2 0.03 P198-ND 2.05 18.45 164.00/100 1090.60/1,000 BR2330-1HE 16 255 3.2 0.03 P199-ND 2.05 18.45 164.00/100 1090.60/1,000 BR2330-1VC 17 Coin 35 1.2 0.10 P244-ND 1.25 11.25 120.00/120 798.00/1,200 CR1220-1HF 18 55 1.2 0.10 P273-ND 1.35 12.15 324.00/300 3304.80/4,800 CR1616-1F2

19 3 90 1.6 0.10 P222-ND 1.08 9.68 258.00/300 1644.75/3,000 CR2016-1F2 20 225 1.2 0.29 P245-ND 1.08 9.68 103.20/120 686.28/1,200 CR2032-1F4 21 560 5.9 0.20 P246-ND 1.90 17.10 152.00/100 1010.80/1,000 CR2354-1GU 22 560 5.9 0.20 P274-ND 1.90 17.10 152.00/100 1010.80/1,000 CR2354-1HF 23 560 5.9 0.20 P248-ND 1.90 17.10 152.00/100 1010.80/1,000 CR2354-1VC

24 1000 10.5 0.20

P126-ND 4.18 37.58 334.00/100 2221.10/1,000 CR2477-1HF 25 P271-ND 4.18 37.58 334.00/100 2221.10/1,000 CR2477-1VC

PCB Terminal - High Temperature Coin Type (-40°C ~ 125°C) 26 48 0.8 P290-ND 1.98 17.78 790.00/500 4029.00/4,000 BR1225A/FA 27 48 1.0 P061-ND 1.98 17.78 189.60/120 1260.84/1,200 BR1225A/HB 28 120 1.5 0.03 P022-ND 1.93 17.33 369.60/240 4712.40/4,800 BR1632A/FA 29 120 1.5 P291-ND 1.93 17.33 231.00/150 2457.84/2,400 BR1632A/GA 30 120 1.5 P023-ND 1.93 17.33 616.00/400 2457.84/2,400 BR1632A/HA

31 120 1.5 P024-ND 1.93 17.33 616.00/400 3927.00/4,000 BR1632A/VA 32

Coin

3 255 3.2 P025-ND 2.20 19.80 352.00/200 2340.80/2,000 BR2330A/FA

33 255 3.2 0.03 P026-ND 2.20 19.80 352.00/200 2340.80/2,000 BR2330A/HD 34 255 3.2 P027-ND 2.20 19.80 352.00/200 2340.80/2,000 BR2330A/VA 35 255 3.2 P224-ND 2.20 19.80 352.00/200 2340.80/2,000 BR2330A/GAE

36 P028-ND 3.68 33.08 176.40/60 1323.00/600 BR2477A/FB 37

1000 8.0

0.03 P029-ND 3.68 33.08 294.00/100 1955.10/1,000 BR2477A/HB

38 P030-ND 3.68 33.08 294.00/100 1955.10/1,000 BR2477A/VA 39 P228-ND 3.68 33.08 294.00/100 1955.10/1,000 BR2477A/GAE

PCB Terminal Type


Computer, Camera, Standard and Standard Coin Types Dimensions Drain Capacity (mm) Weight* Standard Digi-Key Pricing Panasonic Type (V) (mAh) Dia. x Height (g) (mA) Part No. 1 10 Package Carton Part No.

Computer-Type Pack

6 1200 19.5 x 33.9 x 36.0 31.0 2.5 P204-ND 13.50 121.50 1555.20/144 2332.80/288 BR-P2PE

Pack with 6.8KΩ resistor 1200 22.0 x 39.0 x 41.0 45.0 — P203-ND 16.55 148.95 662.00/50 993.00/100 BR-E3C3BCA

Camera-Type Cyl. (Bulk pkg.) 850 15.6 x 27.0 11.0 20 P157-ND 3.13 28.13 250.00/100 1995.00/1,200 CR-2/BE

Cyl. (Retail pkg.) 850 15.6 x 27.0 11.0 20 P155-ND 6.90 62.10 66.24/12 4404.96/1,200 CR-2PA/1BOEM

Cyl. (Bulk pkg.) 3 1500 17.0 x 34.5 17.0 20 P151-ND 2.88 25.88 230.00/100 1529.50/1,000 CR-123APA/B

Cyl. (Retail pkg.) 1500 17.0 x 34.5 17.0 20 P154-ND 6.90 62.10 66.24/12 4404.96/1,200 CR-123APA/1B

Pack (Bulk pkg.) 3300 28.4 x 14.4 x 52.0 39.0 200 P063-ND 10.63 95.63 850.00/100 2550.00/400 CR-V3P/B

Pack (Retail pkg.) 3000 28.4 x 14.4 x 52.0 39.0 200 P212-ND 12.34 — 132.00/12 2376.00/288 CR-V3A/1BOEM

Pack (Bulk pkg.) 1400 35.0 x 19.5 x 36.0 37.0 20 P099-ND 7.63 68.63 610.00/100 2287.50/500 CR-P2/B

Pack (Retail pkg.) 6 1400 35.0 x 19.5 x 36.0 37.0 20 P205-ND 12.30 — 132.84/12 2833.92/288 CR-P2PA/1BOEM

Pack (Bulk pkg.) 1400 34.0 x 17.0 x 45.0 38.0 20 P127-ND 6.63 59.63 530.00/100 1987.50/500 2CR-5MPA/B

Pack (Retail pkg.) 1400 34.0x 17.0 x 45.0 38.0 20 P073-ND 12.30 110.70 118.08/12 2125.44/288 2CR-5MPA/1BOEM

Standard Type A 2200 17.0 x 45.5 13.5 2.5 P362-ND 11.30 101.70 180.80/20 3390.00/500 BR-AG

A with Tabs 2200 17.0 x 45.5 13.5 2.5 P362T-ND 11.60 104.40 185.60/20 3480.00/500 BR-AGT

A 1800 17.0 x 45.5 18.0 2.5 P267-ND 9.55 85.95 764.00/100 5080.60/1,000 BR-A

A with Tabs 1800 17.0 x 45.5 18.0 2.5 P267T-ND 9.85 88.65 788.00/100 5240.20/1,000 BR-AT

1/2 AA with 2 PCB Pins 1000 14.5 x 25.5 8.0 2.5 P631-ND 5.00 45.00 400.00/100 2660.00/1,000 BR-1/2AAE5PE

1/2 AA with 3 PCB Pins 3 1000 14.5 x 25.5 8.0 2.5 P630-ND 5.00 45.00 400.00/100 2660.00/1,000 BR-1/2AAE2PE

2/3 A 1450 17.0 x 33.5 13.5 2.5 P361-ND 5.35 48.15 1712.00/400 4553.92/1,600 BR-2/3AG

2/3 A with Tabs 1450 17.0 x 33.5 13.5 2.5 P361T-ND 5.65 50.85 1808.00/400 4809.28/1,600 BR-2/3AGT

2/3 A 1200 17.0 x 33.5 13.5 2.5 P133-ND 4.70 42.30 75.20/20 2256.00/800 BR-2/3A

2/3 A with Tabs 1200 17.0 x 33.5 13.5 2.5 P201-ND 5.63 50.63 450.00/100 2992.50/1,000 BR-2/3AT-2SP

2/3 A with 2 PCB Pins 1200 17.0 x 33.5 13.5 2.5 P226-ND 5.63 50.63 450.00/100 2992.50/1,000 BR-2/3AE5SP

2/3 A with 3 PCB Pins 1200 17.0 x 33.5 13.5 2.5 P270-ND 5.63 50.63 450.00/100 2992.50/1,000 BR-2/3AE2SP

Standard Coin Type 35 12.5 x 2.0 0.7 0.03 P342-ND 1.30 11.70 208.00/200 2652.00/4,000 BR1220

48 12.5 x 2.5 0.8 0.03 P183-ND 1.23 11.03 392.00/400 2499.00/4,000 BR1225

190 20.0 x 3.2 2.5 0.03 P186-ND 1.15 10.35 184.00/200 1223.60/2,000 BR2032

165 23.0 x 2.5 3.2 0.03 P135-ND 1.43 12.54 228.00/200 1516.20/2,000 BR2325

255 23.0 x 3.0 3.2 0.03 P187-ND 1.83 16.43 292.00/200 1941.80/2,000 BR2330

500 30.0 x 3.2 5.5 0.03 P341-ND 2.75 24.75 440.00/200 2926.00/2,000 BR3032

30 10.0 x 2.5 0.7 0.1 P031-ND 1.08 9.68 344.00/400 2193.00/4,000 CR1025

25 12.5 x 1.6 0.7 0.1 P032-ND 1.08 9.68 344.00/400 2193.00/4,000 CR1216

35 12.5 x 2.0 1.2 0.1 P033-ND .95 8.55 304.00/400 1938.00/4,000 CR1220

40 16.0 x1.2 0.8 0.1 P041-ND 2.70 24.30 432.00/200 1296.00/800 CR1612

Coin

3 55 16.0 x 1.6 1.2 0.1 P034-ND 1.00 9.00 160.00/200 1064.00/2,000 CR1616

75 16.0 x 2.0 1.3 0.1 P035-ND .93 8.33 296.00/400 1887.00/4,000 CR1620

125 16.0 x 3.2 1.8 0.1 P036-ND 1.08 9.68 344.00/400 2193.00/4,000 CR1632

55 20.0 x 1.2 1.4 0.1 P037-ND 1.20 10.80 384.00/400 2448.00/4,000 CR2012

90 20.0 x 1.6 1.7 0.1 P138-ND .30 2.70 48.00/200 191.52/1,200 CR2016

165 20.0 x 2.5 2.5 0.2 P188-ND .30 2.70 48.00/200 612.00/4,000 CR2025

225 20.0 x 3.2 3.1 0.2 P189-ND .28 2.48 44.00/200 561.00/4,000 CR2032

265 23.0 x 3.0 4.0 0.2 P111-ND 1.43 12.83 228.00/200 1516.20/2,000 CR2330

560 23.0 x 5.4 5.9 0.2 P117-ND 1.63 14.63 130.00/100 864.50/1,000 CR2354

100 24.5 x 1.2 2.0 0.2 P042-ND 3.10 27.90 496.00/200 1488.00/800 CR2412

620 24.5 x 5.0 6.3 0.2 P340-ND 1.13 10.13 90.00/100 675.00/1,000 CR2450

1000 24.5 x 7.7 10.5 0.2 P120-ND 2.85 25.65 228.00/100 1516.20/1,000 CR2477

500 30.0 x 3.2 7.1 0.2 P121-ND 2.45 22.05 392.00/200 2606.80/2,000 CR3032

Pin Type

Pin

3 25 4.2 x 25.9 0.55 0.5 P140-ND 3.25 29.25 780.00/300 4972.50/3,000 BR425

50 4.2 x 35.9 0.85 1.0 P139-ND 3.28 29.48 786.00/300 5010.75/3,000 BR435


L

Niobium Titanium Lithium Rechargeable BatteryFeatures: Designed for very low voltage ICs. Nominal voltage is 2.0V. These can be charged and discharged at temperatures as high as 60°C (140°F). Charging voltage is 2.5 volts.

Applications: Power source for backing up memory data in cellular phones, PDAs (personal digital assistants), portable communication devices, and other handheld applications.

Voltage Capacity Dimensions (mm) Weight Drain Std. Digi-Key Price Each Panasonic Type (V) (mAh) Dia. Height (g) (mA) Part No. 1 10 400 Part No.

Coin 2.0 4.0 6.8 2.55 0.25 0.01 P009-ND 2.13 1.92 1.70 NBL621/F9D

Ø 6.8

9.9

0.51.5

+-

0.15

2.55

Vanadium Pentoxide Lithium Rechargeable BatteriesFeatures:• One high-voltage battery to serve your back up needs. This single, compactly designed, cost-effective 3V battery does the work of three 1.2V Ni-Cd or two capacitors. • Months of continuous use as a backup. The VL3032 has a nominal electrical capacity of 100mAh which translates into 10,000 hours with a microprocessor load of 10 μA.

Applications:

• Memory Backup: Facsimiles, ECRs, telephones, typewriters, sequencers, VTRs, video cameras, personal computers, memory cards, tuners.

Due to possible restrictions, a change in shipping method may be required.

Dimensions Drain Charge Capacity (mm) Weight Standard Current Digi-Key Pricing Panasonic Fig. Type (V) (mAh) Dia. Height A (g) (mA) 3.4 ± 0.15V Part No. 1 10 Package Carton Part No. 1 1.5 6.8 2.05 — 0.3 0.01 <0.2 mA P048-ND 4.43 39.83 1416.00/400 9027.00/4,000 VL621-F9D 2 5 12.5 2.0 — 0.7 0.03 <0.5 mA P219-ND 3.75 33.75 750.00/250 9562.50/5,000 VL1216-1F5U 3 Coin 3 7 12.5 2.0 — 0.8 0.03 <0.5 mA P079-ND 4.45 40.05 427.20/120 2840.88/1,200 VL1220-1HF 4

7 12.5 2.0 — 0.8 0.03 <0.5 mA P080-ND 4.45 40.05 890.00/250 5918.50/2,500 VL1220-1VC

5 20 20.0 2.0 — 2.2 0.07 <1.5 mA P081-ND 4.75 42.75 456.00/120 1710.00/600 VL2020-1HF 6 20 20.0 2.0 2.7 2.2 0.07 <1.5 mA P082-ND 4.75 42.75 456.00/120 1710.00/600 VL2020-1VC 7 30 23.0 2.0 — 2.8 0.10 <2.0 mA P221-ND 5.85 52.65 561.60/120 3734.64/1,200 VL2320-1F2 8 Coin 3 30 23.0 2.0 — 2.8 0.10 <2.0 mA P083-ND 5.85 52.65 280.80/60 2106.00/600 VL2320-1HF 6 30 23.0 2.0 2.7 2.8 0.10 <2.0 mA P084-ND 5.85 52.65 468.00/100 2106.00/1,000 VL2320-1VC 8 50 23.0 3.0 — 3.7 0.10 <2.0 mA P085-ND 7.38 66.38 354.00/60 2655.00/600 VL2330-1HF 6 50 23.0 3.0 3.7 3.7 0.10 <2.0 mA P086-ND 7.38 66.38 590.00/100 2655.00/600 VL2330-1VC 9

Coin 3 100 30.0 3.2 — 6.3 0.20 <4.0 mA P087-ND 9.00 81.00 720.00/100 4788.00/1,000 VL3032-1GUF

10 100 30.0 3.2 — 6.3 0.20 <4.0 mA P088-ND 9.00 81.00 1440.00/200 3240.00/600 VL3032-1F2 11 50 23 3.0 — 3.5 0.10 <2.0 mA P002-ND 7.38 66.38 590.00/100 3923.50/1,000 VL2330-1F3

2.65.2

30

5.0

5.0

Fig. 7

Fig. 1 Fig. 2

Fig. 10

.751.8

10.2

Fig. 6

A

.75

3.25

.75.75

.75

.753.5

Fig. 3

10.0±0.5 .75

Fig. 5

20.5±0.5

1.8

Fig. 8

20.5

1.8

Fig. 9

0.2

25.4

5.110.2

Fig. 4

2.5

_ +

0.51.5

9.9Max.

Ø6.8

2.35

0.152

0.754.0

12.5

1.85

2.75

235.6 6.7

2.0

Fig. 11

5.07.6

Ø1.3

2.0

3.0

23.0

+_

3.5

0.1

3.35

3.0

Manganese Lithium Rechargeable Batteries (ML Series)Features: • Charging at voltage levels even under 3V. In order to support the current trend in ICs toward lower

voltages, these batteries can be charged at a 3 ±0.2 voltage level, and this makes it easier to set the charging circuits for the circuits which employ 3V ICs.

• Large capacity for hour-after-hour back-up.

• Excellent withstand voltage char acteristics. These batteries can with stand the application of a continuous 3.2V voltage at a high temperature of 60°C (140°F).

Applications:• Power source for backing up memory data in mobile telephones, personal handy phone systems, memory

cards, pagers, data terminals and office auto mation equipment.

Capacity Dimensions (mm) Weight Drain Standard Digi-Key Pricing Panasonic Fig. Type (V) (mAh) Dia. Height (g) (mA) Part No. 1 10 Package Carton Part No. 1 1.0 4.8 1.4 0.10 0.005 P003CT-ND◊ 2.55 21.25 3570.00/3,000 15618.75/15,000 ML414RH/F9AT 2 1.0 4.8 1.4 0.10 0.005 P004CT-ND◊ 2.55 21.25 3570.00/3,000 15618.75/15,000 ML414RH/F9CT 3 Coin 3 1.2 4.8 1.4 0.09 0.005 P005-ND 1.65 14.85 1755.60/2,000 16500.00/20,000 ML414S/ZT 4 3.4 6.8 1.45 0.17 0.010 P297-ND 2.03 18.23 810.00/500 5163.75/5,000 ML614S/F9F 5 3.4 6.8 1.4 0.16 0.010 P006-ND 1.78 15.98 1888.60/2,000 17750.00/20,000 ML614S/ZT 6 5.0 6.8 2.05 0.30 0.010 P044-ND 2.03 18.23 607.50/500 5163.75/5,000 ML621S/F9D 7 5.0 6.8 2.1 0.23 0.010 P007-ND 1.78 15.98 1888.60/2,000 17750.00/20,000 ML621S/ZT 8 Coin 3 11.0 9.5 2.05 0.50 0.030 P296-ND 2.25 20.25 720.00/400 4590.00/4,000 ML920S/F9D 9 17.0 12.5 2.0 0.80 0.030 P295-ND 2.38 21.38 475.00/250 6056.25/5,000 ML1220/F1A 10 17.0 12.5 2.0 0.80 0.030 P294-ND 2.38 21.38 475.00/250 6056.25/5,000 ML1220/V1A 11 45.0 20 2.0 2.20 0.100 P045-ND 2.68 24.08 428.00/200 5457.00/4,000 ML2020/V1A 12 Coin 3 45.0 20 2.0 2.20 0.100 P046-ND 2.68 24.08 428.00/200 5457.00/4,000 ML2020/G1A 13 45.0 20 2.0 2.20 0.100 P047-ND 2.68 — 144.45/60 6548.40/4,800 ML2020/H1C

◊ For Tape and Reel part number change CT-ND to TR-ND (Not offered as Package or Carton; Tape and Reel only)

Fig. 2 Fig. 3

9.9

Ø6.8

0.51.5

+-

+ _

0.751.810.2

5

Ø20

2.70.2

2.9

Fig. 7

2.5

0.2+ _

2.7

5.080.75

20

3.5

10.16

Fig. 8

20

_ +

20.5 0.2

4.72.7

0.75

1.8

Fig. 11.9

0.15

Ø 6.8

- +0.5

2.0

2.2

1.45

Fig. 4

Ø 9.5

0.52.0

+-

2.05

0.15

Fig. 5

.75

12.52.75

2.6

2.0

Fig. 6

+

.75

3.5

2.45

2.0

+ -

12.5

1.5+

2.35

0.15

Fig. 11 Fig. 12 Fig. 13Fig. 9 Fig. 10

Ø5.00.05

1.45

Ø6.8

Ø5.20.05

2.15

Ø4.8

7.6

+

_3.0

0.1

1.73

Ø4.8

7.6

+

_

0.1

1.73

3.0

Ø4.8

Ø4.00.02

1.45

Ø6.8


L

The MS (Manganese Silicon) battery uses silicon oxide

as anode and lithium manganese to composite oxide

as cathode. As a result, it offers a longer cycle life and

highly stable over-discharge characteristics. Features:

• Large discharge capacity • Long cycle life • Excellent

over-discharge characteristics Operating Temperature:

• -20°C ~ 60°C Applications: • Back up power supply for

memory or clock in various electronic equipment such as

cellular phones, cordless phones, PHS, pagers, memory-

cards, FAX machines, personal computers, PDA, video

cameras, digital cameras, tuners and handy terminals

• Combined use with solar cells • Main power source for

small and slim portable equipment


Manganese Silicon LithiumRechargeable Batteries

ø4.80 1.65 0.5

1.51.60

1.8

1.32.2

0.101.20+

-

ø5.8

1.6

0.5

2.0 2.21.75

0.1+

-

ø6.8

1.8

0.5

2.0

2.5

2.1

0.10+

-

ø6.8

1.5

0.5

2.0 2.5

1.6

0.10+

-

ø6.8

2.11.7

0.51.5

2.50.5

0.15+

-2.1

ø9.5 0.512.8

2.0

2.12.2

3.3 0.15

2.7+

-

Fig. 1 Fig. 2 Fig. 3


Dim. in mm

Standard Maximum Standard Nominal Nominal Internal Charge/Discharge Discharge Current Cycle Life Charge Seiko Voltage Capacity Impedance Current (continuous) 100% 20% Voltage Weight Digi-Key Pricing Instruments Fig. Type (V) (mAh) (Ω) (mA) (mA) D.O.D D.O.D (V) (g) Part No. 1 10 Pkg. Part No. 1 MS412F 1.0 100 0.010 0.10 200 1000 0.07 728-1043-ND 1.45 13.05 232.00/200 MS412F-FL26E 2 MS518S 3.4 60 0.010 0.15 100 1000 0.13 728-1044-ND 1.60 14.40 128.00/100 MS518S-FL35E 3 MS614S

3.0 3.4 80 0.025 0.25 200 1000

3.1 0.17 728-1045-ND 1.55 13.95 124.00/100 MS614S-FL28E

4 MS614S 3.4 80 0.025 0.25 200 1000 0.17 728-1046-ND 1.55 13.95 124.00/100 MS614S-FL29E 5 MS621F 5.5 80 0.025 0.25 200 1000 0.23 728-1047-ND 1.55 13.95 124.00/100 MS621F-FL11E 6 MS920S 11.0 35 0.050 0.80 100 1000 0.47 728-1048-ND 1.80 16.20 144.00/100 MS920S-FL27E

Lithium Batteries

▲ See “Ordering Information” for note on shipping charges on prepaid orders. Due to possible restrictions, a change in shipping method may be required.

Lithium batteries use lithium metal or a lithium aluminum alloy in its negative electrode (anode) and manganese dioxide in its positive electrode (cathode). Features: CR Series: • High operating voltage of 3V and high energy density • Wide operating temperature range of -40°C ~ 85°C, depending on type • Low self-discharge rate of 0.5% per year at room temperature • High capacity cylindrical type • SO9002 certified ML Series: • High operating voltage of 2.5V • Wide operating temperature range of -20°C ~ 60°C • Low self-discharge rate of 2% per year at room temperature • Superior charge and discharge cycle • Able to charge at 2.8V Applications: • Cameras • Electronic meters (water, gas, electricity) • Electronic car keys Memory Backup Power: • RTC and SRAM for cellular phones • SRAM and DRAM for computers • SRAM and DRAM for facsimile machines • SRAM and DRAM for communications equipment and office equipmentDigi-Key is not approved by any state or federal agency as an authorized supplier of product for med ical, life support or life sustaining devices or systems.

Fig. 1

2 0.5

2.26.8

1.4

0.9 1.8

2.60.4

1.8

2 0.5

1.56.8

2.1

0.6 2.0

2.6

2.55

4

0.75

3.813

0.6

2.5

2

3.1

2.8

3313

2.4

3.00.5

2

Fig. 2 Fig. 3 Fig. 4 Dim. in mm

Capacity Dimensions Inch (mm) Weight▲ Standard Discharge Digi-Key Pricing Sanyo Fig. Type (V) (mAh) Diameter x Height oz. (gram) Current (mA) Part No. 1 10 Carton Part No.

Coin 3 25 0.49 x 0.08 (12.5 x 2.0) 0.03 (0.8) 0.1 SY033-ND .60 5.40 1224.00/4,000 CR1220 3 80 0.79 x 0.06 (20.0 x 1.6) 0.06 (1.7) 0.3 SY138-ND .35 3.15 714.00/4,000 CR2016

—

Coin 3 150 0.79 x 0.10 (20.0 x 2.5) 0.09 (2.5) 0.3 SY188-ND .35 3.15 714.00/4,000 CR2025

3 220 0.79 x 0.13 (20.0 x 3.2) 0.11 (3.0) 0.3 SY189-ND .33 2.93 331.50/2,000 CR2032 3 280 0.96 x 0.12 (24.5 x 3.0) 0.14 (4.0) 0.3 SY603-ND 1.13 10.13 1721.25/3,000 CR2430 3 610 0.96 x 0.20 (24.5 x 5.0) 0.24 (6.9) 0.2 SY340-ND 1.13 10.13 1147.50/2,000 CR2450

Coin – Rechargeable 1 3 3.4 0.27 x 0.06 (6.8 x 1.4) 0.006 (0.16) 0.015 SY102-ND 2.13 19.13 4335.00/4,000 ML614-TZ14 2

Coin 3 5.5 0.27 x 0.08 (6.8 X 2.1) 0.008 (0.22) 0.015 SY103-ND 2.13 19.13 4335.00/4,000 ML621-TZ1

3 3 15 0.49 x 0.08 (12.5 x 2.0) 0.03 (0.8) 0.1 SY104-ND 3.60 32.40 1512.00/700 ML1220-TJ1 4 3 15 0.49 x 0.08 (12.5 x 2.0) 0.03 (0.8) 0.1 SY105-ND 3.60 32.40 1512.00/700 ML1220-TT2

Camera Cylindrical 3 160 0.46 x 0.41 (11.6 x 10.8) 0.17 (3.3) 2 SY100-ND 2.93 26.33 2983.50/2,000 CR-1-3N Cylindrical 3 850 0.61 x 1.06 (15.6 x 27.0) 0.39 (11) 10 SY155-ND 3.68 33.08 1955.10/1,000 CR2 Cylindrical 3 1,400 0.67 x 1.36 (17.0 x 34.5) 0.60 (17) 10 SY154-ND 3.45 31.05 2202.48/1,200 CR123A — Pack 3 3,300 1.14 x 0.57 x 2.05 (29.0 x 14.5 x 52.0) 1.34 (38) 20 SY212-ND 11.83 106.43 1892.00/200 CR-V3 Cylindrical 6 160 0.51 x 0.99 (13.0 x 25.2) 0.32 (9.1) 2 SY101-ND 8.20 73.80 4362.40/1,000 2CR-1-3N Pack 6 1,400 1.37 x 0.77 x 1.41 (34.8 x 19.5 x 35.8) 1.31 (37) 10 SY205-ND 8.68 78.08 1388.00/200 CR-P2 Pack 6 1,400 1.34 x 0.67 x 1.77 (34.0 x 17.0 x 45.0) 1.41 (40) 10 SY073-ND 8.68 78.08 1388.00/200 2CR5

Lithium Batteries

† One piece = package of two battery packs. Due to possible restrictions, a change in shipping method may be required.

Features: • Lith i um bat ter ies sub stan tially out last al kaline bat teries and supply energy at a constant volt age over a wide range of dis charge con ditions • Lith ium bat teries have an estimated shelf life of up to 10 years • The L91 AA is the world’s longest lasting AA battery in high-drain applications, based on industry standard testing • 9V type for telemetry and other applications • Energizer e2® Photo Lithium batteries pro vide the ideal power source for

today’s photographic devices, with advanced lithium technology for excep tional power in digital devices • Coin types for keyless entry and other elect ronic ap pli cations


CR

V3

2CR

5

9v

LIT

HIU

M

EL

123

AA

LIT

HIU

M

LIT

HIU

M

1CR

2

LIT

HIU

M

EL

223

Average Cut-Off Dimensions Capacity Voltage Rated (mm) Weight Digi-Key Pricing Energizer Type (V) (mAh) (V) Drain/Load Diameter / Height (g) Part No. 1 Pkg. Carton Part No. AAA 1.5 1,200 0.8 50mA 10.5 / 44.5 7.6 N600-ND 3.70 33.30/10 4519.45/2,296 L92VP AA 1.5 3,000 0.8 50mA 14.5 / 50.5 14.5 N602-ND 3.70 33.30/10 2440.82/1,240 L91VP 9 Volt 9 1,200 5.4 900Ω 26.5 x 17.5 x 49 36.4 N601-ND 11.20 100.80/10 896.00/100 L522MJ Camera 3 1,500 2.0 100Ω 17 / 34.5 16.8 N151-ND 3.30 29.70/10 2106.72/1,200 EL123APVP Camera 3 800 2.0 100Ω 15.6 / 27 11.0 N157-ND 4.50 48.60/12 86.40/24 EL1CR2BP Camera Pack 6 1,500 3.5 200Ω 34 x 17 x 45 39.5 N073-ND 12.30 66.42/6 236.16/24 EL2CR5BP Camera Pack 6 1,400 4.0 200Ω 35 x 19.5 x 36 37.0 N205-ND 12.30 66.42/6 236.16/24 EL223APBP Camera Pack (x2) 3 2,900 2.0 200mA 28.2 x 14 x 51.6 32 N212-ND† 23.08 124.61/6 443.04/24 ELCRV3BP2 Coin, 10MM 3 30 2.0 45kΩ 10 / 2.5 0.7 N031-ND 1.05 11.34/12 60.48/72 ECR1025BP Coin, 12.5MM 3 29 2.0 45kΩ 12.5 / 1.6 0.7 N032-ND 1.08 11.61/12 61.92/72 ECR1216BP Coin, 12.5MM 3 40 2.0 45kΩ 12.5 / 2 0.76 N033-ND .90 8.10/10 718.20/1,500 CR1220VP Coin, 16MM 3 55 2.0 30kΩ 16 / 1.6 1.2 N034-ND 1.00 9.00/10 532.00/1,000 CR1616VP Coin, 16MM 3 79 2.0 30kΩ 16 / 2 1.4 N035-ND .93 8.33/10 1887.00/4,000 CR1620VP Coin, 16MM 3 130 2.0 15kΩ 16 / 3.2 1.8 N036-ND 1.13 10.13/10 1197.00/2,000 CR1632VP Coin, 20MM 3 58 2.0 30kΩ 20 / 1.2 1.3 N037-ND 1.10 9.90/10 2244.00/4,000 CR2012VP Coin, 20MM 3 80 2.0 30kΩ 20 / 1.6 1.9 N138-ND .35 3.15/10 186.20/1,000 CR2016VP Coin, 20MM 3 170 2.0 15kΩ 20 / 2.5 2.8 N188-ND .40 3.60/10 212.80/1,000 CR2025VP Coin, 20MM 3 225 2.0 10kΩ 20 / 3.2 3.3 N189-ND .35 3.15/10 186.20/1,000 CR2032VP Coin, 24.5MM 3 290 2.0 10kΩ 24.5 / 3 4.6 N603-ND 1.35 12.15/10 718.20/1,000 CR2430VP Coin, 24.5MM 3 575 2.0 5.1kΩ 24.5 / 5 6.9 N340-ND 1.38 12.38/10 731.50/1,000 CR2450VP


L

Lithium Rechargeable BatteriesThe HB Series features high capacity and long cycle life with a wide charging voltage range, which is

most suitable for backup use of real time clock and SRAM etc. Features: • Pb-free reflowable • Superior

heat resistance (260°C peak) allows reflow soldering by Pb-free solder • Wide range of charging voltage

• High capacity • Long cycle life • Excellent over-discharge characteristics Operating Temperature:

• -20°C ~ 60°C Applications: • Power supply backup use for cellular phones, wireless phones, digital still

cameras, PHS, PDA and MD players


7.1

3.0 2.0

+-

1.1

1.8 0.5

1.67

0.1

1.1

+

2.6ø4.8

-

1.671.41

ø4.8

+

2.6-0.2

1.0

1.67


Nominal Charge Nominal Capacity (mAh) Internal Standard Charge/ Cycle Life Digi-Key Cut Tape Price Each Digi-Key Tape and Reel Seiko Instruments Fig. Type Voltage Voltage (Voltage Range) Impedance Discharge Current 10% D.O.D 100% D.O.D Weight Part No. 1 10 100 Part No. Pricing Part No. 1 0.3 (3.0 ~ 1.2) 728-1040-1-ND 2.04 1.70 1.36 728-1040-2-ND 3427.20/3,600 HB414-II06E 2 HB414 3.0V 2.5V ~ 3.5V 0.2 (2.5 ~ 1.2) 280Ω 0.005mA 1000 100 0.07g 728-1041-1-ND 1.92 1.60 1.28 728-1041-2-ND 3584.00/4,000 HB414-IV01E 3 0.14 (3.0 ~ 2.0) 728-1042-1-ND 2.04 1.70 1.36 728-1042-2-ND 3427.20/3,600 HB414-IV02E

Dim. in mm

Lithium Batteries


Dim. in mm

28.6

76.2

24.4

Ø 16.8

Connector TypeIDC 1308-102-426

Fig. 6

Ø 0.785

FA D

EC

B

TADIRAN™LITHIUMINORGANIC

BATTERY

TL-5186

3.6 VOLTS

MADE IN ISRAEL

Fig. 4

A

C

D

Ø 0.785

B

E

F

+-

-


BATTERY

TL-5134/SP

3.6 VOLTS

MADE IN ISRAEL

Fig. 7

TADIRANTL-5242

3.6V HIGH ENERGY

LITHIUM BATTERY

12.7

15.6

216

50.8

Loop

Hook

61

21.1

Connector TypeHousing: BERG 71627-001Contacts: BERG 47565-002

Fig. 5Fig. 3 — Solder Tabs3.6

VO

LTS

+

0% M

ercury

&C

admium

3.177.5max.

AB

Fig. 2 — Axial Pins

3.6V

OLT

S+

0% M

ercury

&C

admium

45

A

B

Ø 0.81

Fig. 1 — Standard

3.6 VOLTS

+

0%M

erc

ury & Cadmium

0.7

A

B

Lithium Thionyl Chloride (Li/SOCI2) Cell: Non-RechargeableTadiran Lithium Thionyl Chloride cells offer enduring quality. They are a superior power source, combining the highest energy density and voltage, longest service life, lowest self-discharge, plus the widest temperature range of any battery comm ercially available. These cells are ideally suited to provide long lasting power solutions for critical applications, including high tech electronics, military, consumer appliances, even state-of-the-art wireless communications. Tadiran batteries last by far longer than conventional cells, making them ideal for remote, portable, or seldom used equipment. TL-51XX MBU Series: • Very low self discharge rate • Suited for long-term operation at low current levels with long stands • Intermittent discharge with medium current level, provided that the average current exceeds the active current level TL-2XXX XTRA™ Series: • Excellent shelf life (10

years) • Very low self-discharge • Major improvement of voltage delay at the start of discharge at medium current levels (TMV) • Intermittent discharge at medium current levels TL-59XX XTRA™ High Capacity Series: • High capacity batteries for long term applications at low currents • For use in wireless sensors, utility meters, RFID tags, toll tags for toll road pricing, etc. TLM-15XXMP and TLM-15XXHP Series: • These two families, High Power and Medium Power, are specifically designed for applications requiring high power, long life and extended storage. TLH-XXXX Extended Temperature Series: • For Operation at Temperatures up to 125°C Applications: The following list represents actual applications where Tadiran Lithium cells and batteries are already being used as a main or backup source of energy: • Utility meters and A.M.R. equipment • PC computers and data loggers • CMOS memory and RTC backup • Toll tags and RFID transponders

• Programmable logic controllers • Wireless alarm sensors • Sea buoys and remote monitoring systems • Military and Aerospace systems • Automatic External Defibrillators • Communications Systems • Telematics UL Approval: Tadiran Lithium Thionyl Chloride cells and batteries are UL recognized. UL File No. MH12193


3.6 VOLTS+

0%M

erc

ury & Cadmium

3.6 VOLTS+

0%M

erc

ury & Cadmium

3.6 VOLTS

+

0%M

erc

ury & Cadmium

TADIRANTL-5242

3.6V HIGH ENERGY

LITHIUM BATTERY

3.6 VOLTS

+

0%M

erc

ury & Cadmium

3.6 VOLTS

+

0%M

erc

ury & Cadmium


BATTERY

TL-5135

3.6 VOLTS

MADE IN ISRAEL

3.6 VOLTS+

0%M

erc

ury & Cadmium

Nominal Nominal Discharge Nom. Capacity Dimensions (mm) Weight* Current Digi-Key Pricing Tadiran Fig. Series Type (V) (mAh) A B C D E F (g) (mA) Part No. 1 10 Carton Part No. AA 4 550 50.3 15.1 19.2 50 439-1042-ND 22.00 203.50 4306.50/270 TLM-1550HP AA 4 800 50.5 14.8 20 50 439-1043-ND 24.00 222.00 4698.00/270 TLM-1550MP 1 High Power 2/3AA 4 240 26.9 14.8 — — — — 11 20 439-1045-ND 20.00 185.00 3625.00/250 TLM-1530HP 1/2AA 4 135 19.7 15.1 7.9 12 439-1046-ND 18.00 166.50 3262.50/250 TLM-1520HP 1/2AA 4 200 19.7 15.1 8.0 12 439-1047-ND 20.00 185.00 3625.00/250 TLM-1520MP

1 1/2AA 3.6 950 25.2 14.5

— — — — 9 0.5 439-1002-ND 4.50 41.63 1631.25/500 TL-5101/S

AA 3.6 2,100 50.5 14.5 17.4 2.0 439-1012-ND 5.50 50.88 1993.75/500 TL-5104/S

2

1/2AA with Leads 3.6 950 25.2 14.5 — — — —

9 0.5 439-1003-ND 4.80 44.40 1044.00/300 TL-5101/P MBU AA with Leads 3.6 2,100 50.5 14.5 17.4 2.0 439-1013-ND 5.80 53.65 2102.50/500 TL-5104/P

4

1/10D 3.6 1,000 6.5 32.9 2 3.2 15.24 7.62 16.8 0.5 439-1023-ND 5.90 54.58 2994.25/700 TL-5134/P 1/6D 3.6 1,700 10.2 32.9 2 3.2 15.24 7.62 21.5 0.5 439-1024-ND 6.50 60.13 2639.00/560 TL-5135/P

5 BEL 3.6 400 6.75 18.5 22.5 7.5 4.2 7.62 5.3 0.3 439-1025-ND 4.20 38.85 1522.50/500 TL-5186

1 1/2AA 3.6 1,000 25.2 14.5

— — — — 9 1.0 439-1000-ND 4.70 43.48 1703.75/500 TL-2150/S

XTRA™ AA 3.6 2,100 50.5 14.5 17.4 2.0 439-1010-ND 5.80 53.65 2102.50/500 TL-2100/S

2

1/2AA with Leads 3.6 1,000 25.2 14.5 — — — —

9 1.0 439-1001-ND 5.00 46.25 1087.50/300 TL-2150/P AA with Leads 3.6 2,100 50.5 14.5 17.4 2.0 439-1011-ND 6.10 56.43 2211.25/500 TL-2100/P

1/2AA 3.6 1,200 25.2 14.5 9.2 1.0 439-1004-ND 5.50 50.88 1993.75/500 TL-5902/S 1 2/3AA 3.6 1,650 33.5 14.5 — — — — 11.8 1.3 439-1007-ND 6.20 57.35 2247.50/500 TL-5955/S AA 3.6 2,400 50.5 14.5 17.6 2.0 439-1014-ND 6.90 63.83 1500.75/300 TL-5903/S

1/2AA with Leads 3.6 1,200 25.2 14.5 9.2 1.0 439-1005-ND 5.80 53.65 1261.50/300 TL-5902/P 2 XTRA™ High Capacity 2/3AA with Leads 3.6 1,650 33.5 14.5 — — — — 11.8 1.3 439-1008-ND 6.50 60.13 1178.13/250 TL-5955/P AA with Leads 3.6 2,400 50.5 14.5 17.6 2.0 439-1015-ND 7.20 66.60 1305.00/250 TL-5903/P

1/2AA with Tabs 3.6 1,200 25.2 14.5 9.2 1.0 439-1006-ND 5.80 53.65 464.00/100 TL-5902/T 3 2/3AA with Tabs 3.6 1,650 33.5 14.5 — — — — 11.8 1.3 439-1009-ND 6.50 60.13 2356.25/500 TL-5955/T AA with Tabs 3.6 2,400 50.5 14.5 17.6 2.0 439-1016-ND 7.20 66.60 1566.00/300 TL-5903/T

1/2AA 3.6 900 25.2 14.5 9.6 1.0 439-1030-ND 6.32 58.46 2291.00/500 TLH-5902/S 1 2/3AA 3.6 1,400 33.5 14.5 — — — — 12.5 1.3 439-1032-ND 7.14 66.05 2588.25/500 TLH-5955/S Extended Temperature AA 3.6 2,000 50.5 14.5 18 1.0 439-1034-ND 7.94 73.45 1726.95/300 TLH-5903/S

1/2AA with Leads 3.6 900 25.2 14.5 9.6 1.0 439-1031-ND 6.62 61.24 1439.85/300 TLH-5902/P 2 2/3AA with Leads 3.6 1,400 33.5 14.5 — — — — 12.5 1.3 439-1033-ND 7.44 68.82 1348.50/250 TLH-5955/P AA with Leads 3.6 2,000 50.5 14.5 18 1.0 439-1035-ND 8.24 76.22 1493.50/250 TLH-5903/P

1/10D 3.6 1,000 6.5 32.9 3.4 2.7 15.24 7.62 16.3 1.0 439-1037-ND 7.48 69.19 1626.90/300 TLH-5934/P

4 1/6D 3.6 1,500 10.2 32.9 3.5 2.7 15.24 7.62 21 1.0 439-1038-ND 8.24 76.22 1433.76/240 TLH-5935/P iXtra Waffers 1/10D 3..6 1,000 6.5 32.9 3.4 2.7 15.24 7.62 16.3 1.0 439-1040-ND 6.50 60.13 1413.75/300 TL-5934/P 1/6D 3.6 1,700 10.2 32.9 3.5 2.7 15.24 7.62 21 1.0 439-1041-ND 7.16 66.23 1245.84/240 TL-5935/P

5

2450 3.6 550 6.2 24 —

5.8 4.8 7.62 8.8 0.5 439-1036-ND 4.84 44.77 1684.32/480 TLH-2450/P 2450 3.6 550 6.2 24 5.8 4.8 7.62 8.8 0.5 439-1039-ND 4.20 38.85 1461.60/480 TL-2450/P

6 Standard Battery Packs MBU - AA 3.6 2,100 — — — — — — 27 2.0 439-1026-ND 10.00 92.50 2175.00/300 TL-5242/W

7 w/ Connectors XTRA™ - 1/2AA 3.6 1,000 — — — — — — 12.5 1.0 439-1027-ND 7.90 73.08 3264.68/570 TL-5276/W


L

Instant Cell Phone Chargers

Includes 2 Energizer Lithium Batteries. (N602-ND)

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Digi-Key Price Energizer Fig. Description Part No. Each Part No. 1 Charger plus 2 Lithium AA Batteries and 3 Motorola Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N320-ND 19.99 CEL2MOT 2 Charger plus 2 Lithium AA Batteries and 1 Mini USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N321-ND 19.99 CEL2MUSB 3 Charger plus 2 Lithium AA Batteries and 1 Nokia Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N322-ND 19.99 CEL2NOK 4 Charger plus 2 Lithium AA Batteries and 1 Sprint and 1 Samsung Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N323-ND 19.99 CEL2SPR

Applications:

Cellphone charger for Backup,

Travel and Emergency use.

Features:

• Reusable • Convenient • Portable

Industrial Alkaline and Silver Oxide BatteriesEnergizer® Industrial Alkaline batteries contain the long-lasting power found in Energizer Max® alkaline batteries with a design enhanced for today’s heavy current or continuous use applications. Features: • No mercury added • Excellent shelf life Applications: • Telemetry • Port able Communication • Cameras • Audio Devices • High -Powered Flashlights • Pag ers • TV Remote Controls • Elec tronic Door Locks • Smoke Detectors and moreDigi-Key is not approved by any state or federal agency as an authorized supplier of product for medical, life support or life sustaining devices or systems.

§ Silver Oxide

6v

D

C AA

AA

A

N

9v

Average Cut-Off Rated Dimensions — Inch (mm) Weight Digi-Key Pricing Energizer Size (V) Capacity (mAh) Voltage (V) Drain/Load Diameter Height oz. (g) Part No. Each Pkg. or Tray Carton Part No. D 1.5 20,500 0.8 25mA 1.346 (34.2) 2.421 (61.5) 5.03 (141.9) N105-ND 1.56 12.48/12 65.52/72 EN95 C 1.5 8,350 0.8 25mA 1.031 (26.2) 1.969 (50) 2.3 (66.2) N106-ND 1.32 10.56/12 55.44/72 EN93 AA 1.5 2,779 0.8 25mA 0.571 (14.5) 1.988 (50.5) 0.8 (23) N107-ND .69 11.04/24 57.96/144 EN91 AAA 1.5 1,250 0.8 25mA 0.413 (10.5) 1.752 (44.5) 0.4 (11.5) N146-ND .69 11.04/24 57.96/144 EN92 N 1.5 1,000 0.8 25mA 0.472 (12) 1.189 (30.2) 0.3 (9) N147-ND 1.08 17.28/24 269.57/576 E90VP 9V 9.0 625 4.8 25mA 1.909 x 1.043 x 0.689 (48.5 x 26.5 x 17.5) 1.6 (45.6) N145-ND 2.52 20.16/12 105.84/72 EN22

6V Lantern 6.0 18,000 3.2 25mA 2.685 (68.2) 4.063 (103.2) 23.5 (665) N401-ND 11.33 54.36/6 475.65/60 EN529

D Solder Tabbed Version of above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N105T-ND 1.92 15.36/12 80.64/72 EN95T C Solder Tabbed Version of above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N106T-ND 1.68 13.44/12 70.56/72 EN93T AA Solder Tabbed Version of above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N107T-ND 1.05 16.80/24 88.20/144 EN91T

Specialty Type — Small Electronics and Keyless Entry Cylinder 12 40 6.0 20kΩ 0.406 (10.3) 1.122 (28.5) 0.26 (7.5) N403-ND 1.17 18.72/24 936.00/2,000 A23CVP Button 1.5 150 0.9 7.5kΩ 0.457 (11.6) 0.213 (5.4) 0.08 (2.3) N402-ND .60 9.60/24 240.00/1,000 A76VP Button 1.55 41 1.3 15kΩ 0.311 (7.90) 0.142 (3.60) 0.023 (0.57) N100-ND§ .75 60.00/100 399.00/1,000 392-384TS Button 1.55 75 1.2 10kΩ 0.311 (7.90) 0.213 (5.40) 0.04 (1.12) N101-ND§ 1.70 136.00/100 904.40/1,000 393 Button 1.55 175 1.3 6.5kΩ 0.457 (11.6) 0.213 (5.40) 0.08 (2.3) N102-ND§ 1.33 106.00/100 704.90/1,000 357-303HVP

Button 1.55 120 1.3 6.5kΩ 0.457 (11.6) 0.165 (4.20) 0.06 (1.7) N108-ND§ 1.33 106.00/100 704.90/1,000 386-301TS Button 1.55 85 1.3 15kΩ 0.457 (11.6) 0.120 (3.05) 0.048 (1.35) N109-ND§ 1.33 106.00/100 704.90/1,000 390-389TS Button 1.55 26 1.3 45kΩ 0.268 (6.80) 0.102 (2.60) 0.015 (0.42) N110-ND§ .90 72.00/100 478.80/1,000 377-376TS Button 1.55 32 1.3 45kΩ 0.311 (7.90) 0.102 (2.60) 0.018 (0.5) N111-ND§ 1.03 82.00/100 545.30/1,000 397-396TS

Flashlights

‡ Batteries included † Lithium Batteries recommended

Power Lamp Weight Without Digi-Key Price Energizer Fig. Description Source Output Batteries oz. (g) Part No. Each Part No.

1 Hard Case LED Lantern 4 D‡ 100 Lumens 43.08 (1224.4) N521-ND 58.10 TUF4DPE

2 Industrial Lantern Lantern 51 Lumens 16.8 (475) N511-ND 12.66 451

3 Industrial Lantern Lantern 28.5 Lumens 7.7 (220) N514-ND 4.30 5109IND

4 2 LED Hard Case 2 D‡ 65 Lumens 11.74 (513.2) N517-ND 47.22 TUF2DPE

4 4 LED Hard Case 4 AA‡ 24 Lumens 11.9 (336) N519-ND 29.52 TUF4AAPE

5 3 LED Hard Case 2 AA‡ 18 Lumens 4.1 (116) N516-ND 24.00 TUF2AAPE

6 Industrial Rubber 2 D 16.5 Lumens 5.3 (148) N508-ND 8.20 4250IND

7 Metal 3 Watt LED 2 AA† 65 Lumens 3.79 (107) N522-ND 46.76 ML3W2AAL

7 Metal 1 Watt LED 2 AA 45 Lumens 3.79 (107) N523-ND 33.00 ML1W2AAE

8 Tactical Metal 3 Watt LED 2 AA† 65 Lumens 3.66 (103.7) N524-ND 47.22 MLT3W2AAL

8 Tactical Metal 1 Watt LED 2 AA† 45 Lumens 3.66 (103.7) N525-ND 39.98 MLT1W2AAL

9 Contractor 2 AA‡ 7 Lumens 4.0 (113) N509-ND 7.52 K220WB-E

10 Pen Light 2 AAA‡ 5.6 Candela 0.7 (19) N515-ND 8.10 PLED23AE

11 6 LED Head Beam 3 AAA‡ 5.6 Candela 1.6 (46) N512-ND 22.16 HDL33A2

12 Hard Case LED Swivel Head 4 AA‡ 24 Lumens 17.1 (483) N518-ND 33.22 TUF421PE

13 Hard Case LED Spotlight 4 C‡ 65 Lumens 29 (818.2) N520-ND 47.28 TUF4CPE

14 Industrial Trim Flex LED

2 - CR2032 6 Lumens 1.128 (32) N526-ND 9.54 FNL2BU1CS

Lithium Coin Cells

Dimensions in Inches

TUF4DPE: • Impact Resistant • Weather proof • Shatterproof Lens

• Survives a 30 Foot Drop • Hands-Free Two Position Stand • Long

Battery Life • One K2 Luxeon LED

451: • Floating Lantern • Large Reflector for Bright Beam • Weather-

proof

5109IND: • Large Reflector for Bright Beam • Weatherproof • Floats

TUF2DPE: • Impact Resistant • Weather proof • Shatterproof Lens

• Survives a 15 Foot Drop • Large, Powerful Light • Long Battery

Life

TUF4AAPE: • Impact Resistant • Weather proof • Floats • Shatter-

proof Lens • Survives a 20 Foot Drop • Lifetime Pushbutton Switch

TUF2AAPE: • Impact Resistant • Weather proof • Shatterproof Lens

• Survives a 30 Foot Drop • Lifetime Pushbutton Switch

4250IND: • Heavy Duty Rubber Flashlight • Impact Resistant

• Krypton Bulb

ML3W2AAL / ML1W2AAE: • Compact and Lightweight • Aluminum

Body • Rubber Grip • Lifetime LED Lamp • Reduced Battery

Consumption

MLT3W2AAL / MLT1W2AAL: • High Strength Aluminum Case • Tail

Switch for One-Handed Operation • Textured Grip • Lifetime LED

Lamp • Reduced Battery Consumption

K220WB-E: • Rugged, Impact Resistant Housing • Rubber Grip

• Weatherproof • Floats • Krypton Bulb • Lan yard Included

PLED23AE: • Strong, Lightweight Aluminum • Pocket Clip • Push

Button Switch

HDL33A2: • Multiple Position Pushbutton Switch • Swivel

Adjustment • 2 White LEDs for Spot • 2 White LEDs for Flood

• 4 White LEDs for Flood/Spot • 2 Red LEDs for Night Vision

TUF421PE: • Impact Resistant • Weatherproof • Shatterproof Lens

• Survives a 15 Foot Drop • Broad Beam • Hands-Free for Table or

Bench Top Use • Four Nichia CS LEDs

TUF4CPE: • Impact Resistant • Weatherproof • Floats • Shatterproof

Lens • Survives a 15 Foot Drop • Long Distance Beam • One 3 Watt

Luxeon LED

FNL2BU1: • Flexible Neck • Large Spring Clip Mount • Hands-Free

• Lifetime LED Lamp • 30 Hour Runtime

Energizer® Industrial lighting products are built tough to bring safety and security to every jobFig. 1

Fig. 5

Fig. 13

Fig. 10

Fig. 6

4.75

5.25

10.0

1.75

6.76

7.3801.440

2.394

Fig. 2

Fig. 12

Fig. 3

1.81

2.84

4.606

7.205

Ø 3.898

5.36

7.70

5.08

5.722

0.531

Fig. 11

8.1853.15

Fig. 9

TUF2DPE = 10.26TUF4AAPE = 8.87

TUF2DPE = 3.31TUF4AAPE = 3.03

Fig. 4

Fig. 14

Fig. 7 Fig. 8

HA

RD

CA

SE

PR

OF

ES

SIO

NA

L

Energize

r

10.26

3.31

9.06

4.25

HARD CASE

PROFESSIONAL

R

Energizer

6.08

1.00

0.75

Energizer 3W LEDR

6.06

1.00

0.75

Energizer

R

10.447

0.926


L

* See “Ordering Information” for note on shipping charges on prepaid orders.

Panasonic

Panasonic

SuperHeavy Duty

ExtraHeavy Duty

9vBattery

AAExtraHeavy Duty

NBAT TERY

Pa

na

so

nic

Super

Heavy D

uty

Panasonic Extra / Super Heavy Duty batteries are composed of: manganese dioxide for the positive-activating sub stance, zinc for the negative-activating substance, and an aqueous solution of neutral salts such as zinc chloride and am mo nium chloride for the electro lyte. Features: • Leakage Resistant • Discharge

characteristics for general applications • Good storage life Applications: • Radios, clocks and various other electronic products • Flash lights Digi-Key is not approved by any state or federal agency as an authorized supplier of product for medical, life support or life sustaining devices or systems.

Extra / Super Heavy Duty Carbon Zinc Batteries

Dimensions Voltage Inch (mm) Weight* Digi-Key Pricing Panasonic Size (V) Diameter Height Oz. (grams) Capacity (to 0.9V/Cell) Part No. Each Pkg. Carton Part No.

D 1.5 1.339 (34.0) 2.421 (61.5) 3.53 (100) 700 hrs. (100Ω cont.) P113-ND .72 11.52/24 50.40/120 UM1NPA

C 1.5 1.031 (26.2) 1.969 (50.0) 1.82 (51.5) 310 hrs. (100Ω cont.) P114-ND .66 10.56/24 46.20/120 UM2NPA

AA 1.5 0.571 (14.5) 1.988 (50.5) 0.67 (19) 110 hrs. (100Ω cont.) P103-ND .33 13.20/60 85.80/600 UM-3NX

AAA 1.5 0.413 (10.5) 1.752 (44.5) 0.34 (9.7) 39 hrs. (100Ω cont.) P265-ND .30 10.00/50 78.00/600 R03NPA/BK

N 1.5 0.472 (12.0) 1.189 (30.2) 0.23 (6.55) 30 hrs. (100Ω cont.) P266-ND .33 11.00/50 264.00/2000 UM-5NX

9V 9 1.91 x 1.04 x 0.69 (48.5 x 26.5 x 17.5) 1.34 (38) 2.5 hrs. (100Ω cont. to 5.4V) P104-ND 1.77 11.80/10 206.50/200 006PNX

GENERAL FEATURES: “DO NOT LEAK!!”

• High Quality & High Reliability: The LCR battery has stable and reliable capacity. 100% tested on line for voltage, capacity,

and seals. And all vents are 100% visually inspected during the final assembly process. • High Power Density: These batteries

save installation space, while providing full and reliable power for the equipment, and many have been designed for rapid

recharge, or for high power output. • Leak-resistant Structure: The LCR battery uses an absorbed electrolyte system. The

LCR batteries have exceptional leak resistance, and can be used in any position. • Long Service Life; Float or Cyclic: The

LCR battery has long life in float or cyclic service. • Easy Maintenance: There is no need to check the specific gravity

of the electrolyte or to add water during the service life. Totally sealed, and needs only charging for main tenance. • No

Corrosive Gas Generation: There is no corrosive gas generation during normal use. • Exceptional Deep Discharge Recovery: LCR batteries have exceptional deep discharge recovery and charge acceptance, even after deep or prolonged

discharge. • D.O.T and I.A.T.A. Approval: Transportation; The SLA batteries should be handled as common cargoes for

both air and boat shipping. • U.L. Component Recognition: U.L. Component Recognition under UL1989, requires that

the battery safely vent when overcharged. It further requires that the equipment and battery be submitted together for

formal UL approval. (UL Component Recognition does NOT remove this require ment for complete package testing). The

manufacturer suggests peak charging all sealed lead acid batteries before use and intermittently during storage.


PanasonicLead-acid BatteryConstant voltage charge

Voltage regulationcyclestandbyinitial currentless than 4.5 amperes

14A-15 V13 A-13 VMade in Japan

PanasonicLead-acid Battery

Constant voltage charge

Panasonic

Rechargeable Battery

Panasonic


Sealed Lead-Acid Batteries (Valve Regulated)

Cap. @ 10 Minute Dimensions — Inch (mm) Terminal Weight Digi-Key Pricing Panasonic Panasonic Replacement (V) Rate (watt/cell) L x W x H Type (Inch) lbs. (kg) Part No. 1 Carton Part No. Battery Cross Reference

Watt-Rated Series (Designed for UPS Back-up Systems) 20W 5.51 x 1.52 x 3.70 (140 x 38.5 x 94) .250 spade 2.98 (1.35) P210-ND 33.86 334.11/12 UP-RW1220P1 — 12

45W 5.95 x 2.54 x 3.70 (151 x 64.5 x 94) .250 spade 5.62 (2.55) P225-ND 42.95 353.17/10 UP-RW1245P1 PA; LC-R129P1,

PA; LC-R129CH1

Cap. Panasonic Replacement 20h Rate Dimensions – Inch (mm) Terminal Weight* Digi-Key Pricing Panasonic Battery Cross Reference (V) (Ah) L x W x H Type (Inch) lbs. (kg) Part No. 1 10 Carton Part No. (see cross reference abbreviations)

1.3 3.82 x 0.94 x 1.97 (97 x 24 x 50) .187 spade 0.66 (.30) P128-ND 12.51 111.20 389.20/40 LC-R061R3P EP: CF-6V1.3; YU: NP1.2-6; PS: PS-612

3.4 5.28 x 1.34 x 2.36 (134 x 34 x 60) .187 spade 1.37 (.62) P166-ND 24.73 219.80 461.58/24 LC-R063R4P EP: CF-6V3.4; YU: NP3-6; PS: PS-630

6 4.5 2.76 x 1.89 x 4.02 (70 x 48 x 102) .187 spade 1.59 (.72) P141-ND 15.26 138.75 299.70/24 LC-R064R5P EP: CF-6V4.5; YU: NP4-6; PS: PS-640

7.2 5.95 x 1.34 x 3.70 (151 x 34 x 94) .187 spade 2.78 (1.26) P074-ND 23.60 — 232.88/12 LC-R067R2P EP: CF-6V7(A); YU: NP7-6(A); PS: PS-670F1

12.0 5.95 x 1.97 x 3.70 (151 x 50 x 94) .187 spade 4.30 (1.95) P075-ND 30.62 — 302.14/12 LC-R0612P EP: CF-6V12(A); YU: NP12-6(A); PS: PS-6100F1

12.0 5.95 x 1.97 x 3.70 (151 x 50 x 94) .250 spade 4.30 (1.95) P165-ND 30.62 — 302.14/12 LC-R0612P1 EP: CF-6V12(C); YU: NP12-6(D); PS: PS-6100F2

1.3 3.82 x 1.87 x 1.97 (97 x 47.5 x 50) .187 spade 1.30 (.59) P264-ND 26.26 233.40 408.45/20 LC-R121R3P EP: CF-12V1.3; YU: NP1.2-12; PS: PS-1212

2.2 6.97 x 1.34 x 2.36 (177 x 34 x 60) .187 spade 1.76 (.80) P171-ND 31.12 276.60 580.86/24 LC-R122R2P EP: CF-12V2; YU: NP2.3-12; PS: PS-1220

3.4 5.28 x 2.64 x 2.36 (134 x 67 x 60) .187 spade 2.65 (1.20) P172-ND 41.11 — 383.67/12 LC-R123R4P EP: CF-12V3; YU: NP2.6-12; PS: PS-1230

7.2 5.95 x 2.54 x 3.70 (151 x 64.5 x 94) .187 spade 5.45 (2.47) P078-ND 37.80 — 294.00/10 LC-R127R2P EP: CF-12V7.2(A); YU: NP7-12(A); PS: PS-1270F1

7.2 5.95 x 2.54 x 3.70 (151 x 64.5 x 94) .250 spade 5.45 (2.47) P218-ND 37.80 — 294.00/10 LC-R127R2P1 EP: CF-12V7.2(C); YU: NP7-12(D); PS: PS-1270F2

12 12 5.95 x 3.86 x 3.70 (151 x 98 x 94) .250 spade 8.41 (3.8) P230-ND 57.33 — 267.54/6 LC-RA1212P1 EP: CF-12V12; YU: NP12-12; PS: PS-12120

17 7.13 x 2.99 x 6.58 (181 x 76 x 167) nut/bolt 14.3 (6.5) P174-ND 68.71 — 235.56/4 LC-RD1217P EP: CF-12V17; YU: NP18-12; PS: PS-12180

20 7.13 x 2.99 x 6.58 (181 x 76 x 167) nut/bolt 14.6 (6.6) P231-ND 79.47 — 272.46/4 LC-X1220P —

28 6.50 x 4.92 x 7.07 (165 x 125 x 179.5) nut/bolt 24.3 (11) P049-ND 110.85 950.10 — LC-X1228P PA: LCXB1228P

28 6.50 x 4.92 x 6.89 (165 x 125 x 175) Threaded post 24.3 (11) P629-ND 110.85 950.10 3547.04/40 LC-X1228AP —

33 7.70 x 5.12 x 7.09 (195.6 x 130 x 180) nut/bolt 26.5 (12) P259-ND 119.37 1023.15 — LC-R1233P EP: CF-12V33U1; PS: PS-12330; PA: LCR12V33

* See “Ordering Information” for note on shipping charges on prepaid orders.

CROSS REFERENCEABBREVIATIONS:

EP = Eagle-Picher

YU = Yuasa

PS = Power Sonic

PA = Panasonic


MADE IN U.S.A.

Industrial

9v

Battery

DBAT TERY

cBAT TERYAABA TTERY

PanasonicA

lkaline

IndustrialP

anasonicAlkaline

IndustrialP

anasonicAlkaline

IndustrialP

anasonicAlkaline

* See “Ordering Information” for note on shipping charges on prepaid orders. † Made in Japan ‡ Initial Voltage 1.7V

Alkaline: The cylindrical alkaline battery is composed of: manganese dioxide for the positive-activating substance, zinc powder for the negative-activating substance, and caustic alkali for the electrolyte.Features: • Large Current and Large Capacity for an Excellent Performance • Stable Voltage and Current • Unsurpassed Resistance to Leakage • Excellent Storage LifeApplications: 99% MERCURY FREE: • Headphone stereo, radio-cassette recorders, strobes, cameras, electronic calculators, 8 mm cameras, electric shavers, tape recorders, high-power flashlights, toys and other cordless products. Also available in tabbed versions denoted by “T” suffix in Digi-Key part number.OxyRide: is the result of a two-way breakthrough in materials and manufacturing technology exclusive to Panasonic. The OxyRide battery uses newly developed oxy-

hydroxide which releases a higher initial voltage than traditional alkaline batteries, while a new vacuum-pouring technology allows a higher quantity of electrolytes to be inserted into the battery. As a result of these innovations, the Oxyride battery offers more power and longer-lasting energy.Applications: • Digital Cameras • High Current Drain Devices • Applications of >500mW or >500mA • Also available in tabbed versions denoted by “T” suffix in Digi-Key part number.OxyRide batteries are NOT recommended for use in flashlights (except LED flashlights) or any product with bulbsDigi-Key is not approved by any state or federal agency as an authorized supplier of product for medical, life support or life sustaining devices or systems.

Industrial Alkaline and OxyRide™ Batteries

Voltage Dimensions – Inch (mm) Weight* Capacity Digi-Key Pricing Panasonic Size (V) Diameter Height Oz. (grams) (to 0.9V/Cell) Part No. Each Package Carton Part No.

Alkaline

D 1.5 1.346 (34.2) 2.421 (61.5) 4.76 (135) 1200 hrs. (100Ω cont.) P105-ND 1.68 13.44/12 141.12/144 AM-1PIX

C 1.5 1.031 (26.2) 1.969 (50.0) 2.29 (65) 380 hrs. (100Ω cont.) P106-ND 1.26 20.16/24 157.25/288 AM-2PIX

AA 1.5 0.571 (14.5) 1.988 (50.5) 0.85 (24) 170 hrs. (100Ω cont.) P107-ND .54 14.40/40 140.40/600 AM-3PIX/2S

AAA 1.5 0.413 (10.5) 1.752 (44.5) 0.42 (12) 65 hrs. (100Ω cont.) P146-ND .54 18.00/50 117.00/500 AM-4PIX/2S

N 1.5 0.472 (12.0) 1.189 (30.2) 0.32 (9) 48 hrs. (100Ω cont.) P147-ND† 1.08 17.28/24 280.80/600 AM5X

9V 9 1.93 x 1.04 x 0.69 (49.0 x 26.0 x 17.5) 1.66 (47) 6 hrs. (100Ω cont. to 5.4V) P145-ND 2.13 17.04/12 265.82/288 6AM-6PIX/1S

D 1.5 Tabbed Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P105T-ND 2.04 16.32/12 171.36/144 AM-1PIXT

C 1.5 Tabbed Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P106T-ND 1.62 25.92/24 202.18/288 AM-2PIXT

AA 1.5 Tabbed Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P107T-ND .81 21.60/40 210.60/600 AM-3PIX/2ST

OxyRide

AA 1.5‡ 0.551 (14.0) 1.969 (50.0) 0.84 (23) 2800 mWh @100 mW P277-ND† 1.20 40.00/50 520.00/1000 ZR-6XA/BOEM

AAA 1.5‡ 0.402 (10.2) 1.736 (44.1) 0.42 (12) 1300 mWh @50 mW P278-ND† 1.20 40.00/50 300.00/500 ZR-03XA/BOEM

AA 1.5‡ Tabbed Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P277T-ND† 1.56 52.00/50 676.00/1000 ZR-6XA/BOEMT


L

TECHNICAL FEATURES: “DO NOT LEAK!!”

• Sealed Construction: BB unique construction and sealing technique ensures that no electrolyte leakage should occur from the terminals or case. They are classified as “Non-Spillable” and meet all requirements of the International Air Transport Association (I.A.T.A.) and D.O.T.• Electrolyte Suspension System: All BB batteries utilize an electrolyte suspension system consisting of a glass fibre separator material. This sus pension system helps to achieve maximum service life, by fully retaining the electrolyte and preventing its escape from the separator material. No silica gels or other contaminants are used.• Maintenance Free Operation: During the life of BB batteries, there is no need to check their specific gravity or add water etc. In fact, there are no provisions for such maintenance functions to be carried out.• Operation in any Orientation: The combination of sealed construction and BB’s electrolyte suspension system permits operation of BB batteries in any orientation, but upside-down charging should be avoided. Battery will not lose its capacity, electrolyte, or service life under any orientation.• Low Pressure Venting System: BB batteries are equipped with a safe, low pressure venting system, which is designed to release excess gas and reseal automatically

in the event of the internal gas pressure rising to an unacceptable level. This low pressure venting system, coupled with the significantly high recombination efficiency, make BB batteries one of the safest valve regulated lead acid batteries available.• Heavy Duty Grids: The heavy duty lead calcium alloy grids in BB batteries provide an extra margin of performance and service life in both float and cyclic applications, even in conditions of deep discharge.The manufacturer suggests peak charging all sealed lead acid batteries before use and intermittently during storage.• U.L. Component Recognition: U.L. Component Recognition under UL1989, requires that the battery safely vent when overcharged. It further requires that the equipment and battery be submitted together for formal UL approval.

Note: Recycling information available on Digi-Key website.Digi-Key® is not approved by any state or federal agency as an authorized supplier of product for medical, life support or life sustaining devices or systems.CROSS REFERENCE ABBREVIATIONS: EP = Eagle-Picher; YU = Yuasa; PS = Power Sonic; CS = CSB; PA = Panasonic; UP = Universal Power

* See “Ordering Information” for note on shipping charges on prepaid orders. † Capacity at 10h rate (Ah)

Sealed Lead-Acid Batteries (Valve Regulated)

Terminal Adapters

BB BatteryLead-acid BatteryConstant voltage charge

Voltage regulationcyclestandbyinitial currentless than 4.5 amperes

14A-15 V13 A-13 VMade in Japan

BB BatteryLead-acid Battery

Constant voltage charge

BB Battery


BB Battery

RechargeableBatte

ry

Terminal Adapters

T1-T2 T2-T1

B1-T2

Cap. 20h Terminal BB Replacement Rate Dimensions – Inch (mm) Type Weight* Digi-Key Pricing BB Battery Cross Reference (V) (Ah) L x W x H (Inch) lbs. (kg) Part No. 1 10 Carton Part No. (see above for mfg. abbreviations)

BP Series — General Use 1.2 3.82 x 0.98 x 2.01 (97 x 25 x 51) .187 spade 0.66 (.30) 522-1000-ND 11.25 100.00 481.25/55 BP1.2-6-T1 EP: CF-6V1.3; YU: NP1.2-6; PS: PS-612; CS: GP612; PA: LC-R061R3P, LCR6V1.3P

3.0 5.28 x 1.34 x 2.36 (134 x 34 x 60) .187 spade 1.43 (.65) 522-1001-ND 12.15 — 194.40/18 BP3-6-T1 EP: CF-6V3.4; YU: NP3-6; PS: PS-630; CS: GP630; PA: LC-R063R4P, LCR6V3.4P

5.0 2.76 x 1.89 x 4.02 (70 x 48 x 102) .187 spade 2.09 (.95) 522-1002-ND 14.00 — 184.11/16 BP5-6-T1 EP: CF-6V4.5; YU: NP4-6; PS: PS-640; CS: GP645; PA: LC-R064R2P, LCR6V4P

6 7.0 5.94 x 1.34 x 3.70 (151 x 34 x 94) .187 spade 2.87 (1.3) 522-1003-ND 19.31 — 190.48/12 BP7-6-T1 EP: CF-6V7(A); YU: NP7-6(A); PS: PS-670F1; CS: GP672F1; PA: LC-R067R2P, LCR6V7.2P

7.0 5.94 x 1.34 x 3.70 (151 x 34 x 94) .250 spade 2.87 (1.3) 522-1004-ND 19.31 — 190.48/12 BP7-6-T2 EP: CF-6V7(C); YU: NP7-6(D); PS: PS-670F2; CS: GP672F2; PA: LC-R067R2P1, LCR6V7.2P1

12.0 5.94 x 1.97 x 3.70 (151 x 50 x 94) .187 spade 4.52 (2.05) 522-1005-ND 26.80 — 176.27/8 BP12-6-T1 EP: CF-6V12(A); YU: NP12-6(A); PS: PS-6100F1; CS: GP6120F1; PA: LC-R0612P, LCR6V12P

12.0 5.94 x 1.97 x 3.70 (151 x 50 x 94) .250 spade 4.52 (2.05) 522-1006-ND 26.80 — 176.27/8 BP12-6-T2 EP: CF-6V12(C); YU: NP12-6(D); PS: PS-6100F2; CS: GP6120F2; PA: LC-R0612P1, LCR6V12P1

13.0 4.25 x 2.80 x 5.51 (108 x 71 x 140) H connector 5.51 (2.5) 522-1029-ND 35.51 — 233.54/8 BP13-6-WH —

1.2 3.82 x 1.77 x 2.09 (97 x 45 x 53) .187 spade 1.30 (.59) 522-1007-ND 17.24 141.71 402.15/30 BP1.2-12-T1 EP: CF-12V1.3; YU: NP1.2-12; PS: PS-1212; CS: GP1212; PA: LC-R121R3P, LCR12V1.3P

2.3 7.01 x 1.34 x 2.36 (178 x 34 x 60) .187 spade 2.07 (.94) 522-1008-ND 19.91 — 294.71/18 BP2.3-12-T1 EP: CF-12V2; YU: NP2.3-12; PS: PS-1220; CS: GP1222; PA: LC-R122R2P, LCR12V2.2P

3.0 5.28 x 2.64 x 2.36 (134 x 67 x 60) .187 spade 2.87 (1.30) 522-1009-ND 24.12 — 198.32/10 BP3-12-T1 EP: CF-12V3; YU: NP2.6-12; PS: PS-1230; CS: GP1234; PA: LC-R123R4P, LCR12V3.4P

5.0 3.54 x 2.76 x 4.02 (90 x 70 x 102) .187 spade 4.10 (1.86) 522-1022-ND 24.98 — 164.28/8 BP5-12-T1 EP: CF-12V4.5(A); YU: NP5-12(A); PS: PS-1250F1; CS: GP1245F1; PA: LC-R125P, LCR12V5P

5.0 3.54 x 2.76 x 4.02 (90 x 70 x 102) .250 spade 4.10 (1.86) 522-1010-ND 24.98 — 164.28/8 BP5-12-T2 EP: CF-12V4.5(C); YU: NP5-12(D); PS: PS-1250F2; CS: GP1245F2; PA: LC-R125P1, LCR12V5P1

7.0 5.94 x 2.56 x 3.66 (151 x 65 x 93) .187 spade 5.73 (2.60) 522-1011-ND 31.66 — 156.18/6 BP7-12-T1 EP: CF-12V7.2(A); YU: NP7-12(A); PS: PS-1270F1; CS: GP1272F1; PA: LC-R127R2P, LCR12V7.2P

7.0 5.94 x 2.56 x 3.66 (151 x 65 x 93) .250 spade 5.73 (2.60) 522-1012-ND 31.66 — 156.18/6 BP7-12-T2 EP: CF-12V7.2(C); YU: NP7-12(D); PS: PS-1270F2; CS: GP1272F2; PA: LC-R127R2P1, LCR12V7.2P1

12 10 5.94 x 2.56 x 4.57 (151 x 65 x 116) .250 spade 7.28 (3.3) 522-1030-ND NEW! 43.31 — 213.68/6 BP10-12-T2 UP: UB12100; PA: LCR12V10P; PS: PS-12100; YU: NP10-12; CS: GP12100

12 5.94 x 3.86 x 3.70 (151 x 98 x 94) .250 spade 8.89 (4.03) 522-1013-ND 49.21 — 161.84/4 BP12-12-T2 EP: CF-12V12; YU: NP12-12; PS: PS-12120; CS: GP12120; PA: LC-RA1212P1, LCR12V12PF

17 7.13 x 2.99 x 6.54 (181 x 76 x 166) nut/bolt 13.6 (6.15) 522-1014-ND 52.80 452.55 — BP17-12-B1 EP: CF-12V17; YU: NP18-12; PS: PS-12180; CS: GP12170; PA: LC-RD1217P, LCR12V17

20 7.13 x 2.99 x 6.54 (181 x 76 x 166) nut/bolt 14.0 (6.35) 522-1026-ND 61.50 527.10 — BP20-12-B1 CS: GP12200; PS: PSH-12180

28 6.89 x 6.54 x 4.92 (175 x 166 x 125) nut/bolt 21.2 (9.6) 522-1015-ND 79.35 680.10 — BP28-12-B1 EP: CF-12V26; YU: NP24-12; PS: PS-12260; CS: GP12260

33 7.68 x 5.08 x 7.05 (195 x 129 x 179) nut/bolt 24.8 (11.3) 522-1016-ND 104.35 894.45 — BP33-12S-B7 EP: CF-12V33U1; PS: PS-12330; CS: GP12340; PA: LC-R1233P, LCR12V33

40 7.76 x 6.50 x 6.73 (197 x 165 x 171) nut/bolt 31.5 (14.3) 522-1017-ND 122.27 1048.05 — BP40-12-B2 EP: CFR-12V38; YU: NP38-12; PS: PS-12400; CS: GP12400; PA: LC-X1242P

65 13.78 x 6.54 x 6.85 (350 x 166 x 174) nut/bolt 54.0 (24.5) 522-1018-ND 196.44 1683.75 — BP65-12-B2-2 EP: CFR-12V65; YU: NP65-12; PS: PS-12750; CS: GP12650; PA: LC-X1265P, LCR12V65P

EB Series — Mobility Use 12 50.0 7.76 x 6.50 x 6.73 (197 x 165 x 171) nut/post 36.38 (16.5) 522-1028-ND 202.20 1733.10 — EB50-12-I2 —

HR Series — High Rate Use 8.0† 5.94 x 2.56 x 3.70 (151 x 65 x 94) .250 spade 6.06 (2.75) 522-1023-ND 53.26 — 262.74/6 HR9-12-T2 YU: NPX-L35; PS: PSH-1280F2; CS: HR1234WF2; PA: UP-RW1245P1, LC-R129P1, LCR129CH1

12 13.0† 5.94 x 3.86 x 3.86 (151 x 98 x 98) .250 spade 9.25 (4.20) 522-1025-ND 70.39 603.30 — HR15-12-T2 CS: HR1251W

20.0† 7.13 x 2.99 x 6.54 (181 x 76 x 166) nut/bolt 14.33 (6.50) 522-1027-ND 93.61 802.35 — HR22-12-B1 —

MPL Series — High Rate, Long Life Standby Use 12 53† 8.98 x 5.47 x 8.82 (228 x0 139 x 224) nut/bolt 39.2 (17.8) 522-1024-ND 195.91 1679.25 — MPL55-12-B5 CS: GPL12520; PS: PG-12V55

Digi-Key Price BB Description Part No. Each Part No.

0.187 Terminal ~ 0.250 Terminal 522-1019-ND .50 T1-T2

0.250 Terminal ~ 0.187 Terminal 522-1020-ND .50 T2-T1

Nut/Bolt Terminal ~ 0.250 Terminal 522-1021-ND .50 B1-T2

Battery Charger/ Maintainer

‡ Recommended for 2.0 to 3.4 Ah batteries.

† Recommended for 4.0 Ah and above batteries.

The InteliTender brings the battery to full optimum

charge. Then, under the control of its computer,

monitors the batteries voltage, supplying only

what is needed to maintain the ideal charge.

Model 300 charges 2 batteries.

MODEL 150

BATTERY READYBATTERY CHARGING

SHORTED/REVERSED LEADS

TM

INTELITENDER

A

2.5 (63.5)

3.50 (89)

B

InteliTender Models 150 and 300 Digi-Key Price Description Part No. Each

Cable (Must Order Separately)

Battery Hook-up,

Spring Clamp PATC-07-ND 7.49

Motorcycle Hook-up,

Ring Lugs PATC-06-ND 5.00

Marine Hook-up,

Ring Lugs PATC-05-ND 5.00

Lead Acid Battery ChargersFeatures: • 100 ~ 240VAC • Switching DC Battery Chargers • Automatic Fast/Float Function • LED Indicator • Optimizes Battery Life • Meets Safety Agency Requirements • Complies with EMI-RFI Regulations • Impact Resistant Polycarbonate Enclosures • Three Year Warranty • Note: IEC320 AC Power cords not included

Dim. – Inch (mm) Digi-Key Price Volt Amp Model A B Part No. Each

Battery Chargers 6 .75 150 PATC-02-ND‡ 69.93

6 1.5 150 5.0 (127) 5.75 (146)

PATC-01-ND† 69.93

12 .75 150 PATC-04-ND‡ 69.93

12 1.5 150 PATC-03-ND† 69.93

12 x 2 1.5 x 2 300 7.0 (178) 7.75 (197) PATC-08-ND† 124.88

Output Max. Dim. – Inch (mm) AC Input Mating Connectors Digi-Key Price Each Ault Fig. VDC mA Power (W) L x W x H Cord Panel Mount PCB Mount Harness Mount Part No. 1 10 25 Part No.

1 6 400 3 1.88 x 2.20 x 1.96

— — —

— 271-2377-ND 22.28 18.16 17.05 3VA0603007

12 300 4.47 (48 x 56 x 50) 271-2378-ND 22.28 18.16 17.05 3VA1202507

1 6 400 3.73 2.95 x 2.72 x 1.93

— — —

— 271-2379-ND 22.28 18.16 17.05 5VA0606007

12 500 7.45 (75 x 69 x 49) 271-2380-ND 22.28 18.16 17.05 5VA1205007

1

12 500 7.35 3.75 x 2.10 x 1.25

— SC1048-ND SC1050-ND

CP-024B-ND 271-2381-ND† 31.83 27.31 25.13 BA500120500003BK (95 x 53 x 32)

2

12 500 7.35 3.75 x 2.10 x 1.25

Q348-ND SC1048-ND SC1050-ND CP-024B-ND 271-2382-ND 31.82 28.04 25.80 BA500120500003NK (95 x 53 x 32) 6 1000 7.35 271-2383-ND 50.80 45.00 42.10 BVL061000003N 6 2000 14.70 271-2384-ND 50.80 45.00 42.10 BVL062000003N

3 12 600 8.82 4.20 x 2.60 x 1.46

Q102-ND SC1048-ND SC1050-ND

CP-024B-ND 271-2385-ND 50.80 45.00 42.10 BVL120600003N

12 1200 17.64 (107 x 66 x 37) 271-2386-ND 50.80 45.00 42.10 BVL121200003N 24 300 8.82 271-2387-ND 53.71 44.42 42.10 BVL240300003N 24 600 17.64 271-2388-ND 49.69 41.10 38.95 BVL240600003N 6 3800 28

5.08 x 3.05 x 1.59 271-2389-ND 79.73 70.35 65.66 BVW063800003A

3 12 2250 33 (129 x 77 x 40)

Q102-ND SC1048-ND SC1050-ND CP-024B-ND 271-2390-ND 79.73 70.35 65.66 BVW122250003A 24 1250 37 271-2391-ND 79.73 70.35 65.66 BVW241250003A

† With power cord

Fig. 1

L

H

W

CHARGE

POWER

Fig. 2

W L

H

L

H

W

Fig. 3

Shown without power cord

2-pin input


L

Battery Holders

(Continued)◆ RoHS Compliant

No. of Digi-Key Price Each Fig. Cells Description Part No. 1 10 100

“1/3N” Cell Holders — RoHS Compliant 1 1 PC Mount, Solder Legs BC1/3N-ND .84 .76 .64

“N” Cell Holders 2 2 PC Mount, Solder Legs BH2N-ND 1.89 1.70 1.56

“AAA” Cell Holders 3 2 PC Mount, Solder Legs BH2AAA-PC-ND◆ 1.30 1.18 .98 4 3 PC Mount, Solder Legs BH3AAA-PC-ND 2.19 1.98 1.65

3

2 6” (152.40mm) Wire Leads,

Stripped-Tinned .187” (4.76mm) BH2AAA-W-ND 1.30 1.18 .98

4


Stripped-Tinned .187” (4.76mm) BH3AAA-W-ND 2.19 1.98 1.65

5


Stripped-Tinned .187” (4.76mm) BH4AAA-W-ND 2.42 2.19 1.83

9


Stripped-Tinned .161” (5mm) with Cover SBH-431-1A-ND◆ .75 .68 .57

“AA” Cell Holders 3 2 PC Mount, Solder Legs BH2AA-PC-ND◆ 1.37 1.24 1.03 4 3 PC Mount, Solder Legs BH3AA-PC-ND 2.34 2.12 1.77 5 4 PC Mount, Solder Legs BH4AA-PC-ND 2.52 2.27 1.90 6 2 PC Mount, Solder Legs BK-6100-PC4-ND◆ NEW! 2.70 2.22 2.10 7 3 PC Mount, Solder Legs BK-1280-PC6-ND◆ NEW! 2.88 2.52 2.26 8 4 PC Mount, Solder Legs BK-1279-PC8-ND◆ NEW! 3.35 2.76 2.43 10 1 PC Mount, Solder Legs BHAA-3-ND◆ .84 .78 .70

11

3 Battery Case for 3 AA Cells, 6” (152.40mm) Wire

Leads and Switch with Belt Clip SBC331AS-GRN-ND◆ 1.94 1.75 1.62


12

Leads and Switch SBH-321AS-ND◆ .70 .63 .58


Leads and Switch SBH-331AS-ND .98 .89 .82


12


Leads and Switch SBH-341AS-ND 1.06 .95 .88

3


Stripped-Tinned .187” (4.76mm) BH2AA-W-ND 1.37 1.24 1.03

4


Stripped-Tinned .187” (4.76mm) BH3AA-W-ND◆ 2.15 1.94 1.62

5


Stripped-Tinned .187” (4.76mm) BH4AA-W-ND 2.52 2.27 1.90

Computer Clock Battery Replacement — “AA” Cell Holder — RoHS Compliant

13

3 9” (228.60mm) Wire Leads with Connector,

Velcro Pads Included BH3AA-211-ND 3.12 2.81 2.77

“1/2AA” Cell Holders — RoHS Compliant 10 1 PC Mount, Solder Legs BH1/2AA-3-ND .76 .70 .63

“2/3A” or “123A” Cell Holders 10

1 PC Mount, Solder Legs BH2/3A-3-ND◆ .78 .73 .66

— Cover for BH2/3A-3 BH2/3AC-ND .65 .59 .50

14 1 PC Mount, Solder Legs BC2/3AE-ND◆ 1.43 1.32 .83

— Cover for BC2/3AE BC2/3AC-ND .46 .42 .28

“C” Cell Holders — RoHS Compliant 15 1 PC Mount, Solder Legs BHC-2-ND 1.97 1.78 1.72

NEW! “D” Cell Holders — RoHS Compliant NEW! 16 1 PC Mount, Solder Legs BHD-2-ND 3.98 3.49 3.03

Lantern Battery Replacement — “D” Cell Holders — RoHS Compliant 17 4 Uses Four UM-1 or D Cells BA4D-S-ND 2.92 2.63 2.54

Coin Cell Holders — 10mm Cell Diameter — RoHS Compliant 18 1 PC Mount, Solder Legs, 2 ~ 2.5mm Cell Height BH401-ND .95 .86 .75

.187

.180

.375

Ø.110-3 places

KEY NC

(+) (-)

+

-

LO

CK

POINT

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5

Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14

Fig. 15 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22

Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Fig. 31

Fig. 32 Fig. 33 Fig. 34 Fig. 35 Fig. 36 Fig. 37 Fig. 38 Fig. 39


Fig. 49 Fig. 50 Fig. 51 Fig. 52 Fig. 53 Fig. 54 Fig. 55

Fig. 6 NEW! Fig. 7 NEW!

Fig. 8 NEW!

Fig. 16 NEW!


L

◆ RoHS Compliant † Stripped-Tinned 3/16” (4.78mm)

“Budget Balancers” Battery HoldersFig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8




“N” Cell Holders — RoHS Compliant 1 1 Solder Tabs BHNL-ND .55 .50 .46

2 2 Solder Tabs BH2NL-ND .59 .54 .50

“AAA” Cell Holders 3 2 Solder Tabs BC2AAAL-ND◆ .59 .54 .50

4 4 Solder Tabs BC4AAAL-ND 1.41 1.27 1.18

5 4 Solder Tabs BH24AAAL-ND .96 .87 .80

3 2 6” Wire Leads BC2AAAW-ND† .67 .60 .56

4 4 6” Wire Leads BC4AAAW-ND† 1.44 1.30 1.20

5 4 6” Wire Leads BH24AAAW-ND† .98 .89 .82

“AA” Cell Holders 6 1 Solder Tabs BCAAL-ND◆ .54 .49 .46

7 2 Solder Tabs BC12AAL-ND◆ .57 .52 .48

No. of Digi-Key Price Each Fig. Cells Description Part No. 1 10 100 8 2 Solder Tabs BC22AAL-ND◆ .55 .50 .46



11 4 Solder Tabs BH24AAL-ND◆ .82 .75 .69

12 4 Solder Tabs BH14AAL-ND◆ .69 .62 .58

13 6 Solder Tabs BH26AAL-ND◆ 1.18 1.06 .98

14 8 Solder Tabs BH48AAL-ND 1.41 1.27 1.18

8 2 6” Wire Leads BC22AAW-ND† .57 .52 .48



11 4 6” Wire Leads BH24AAW-ND† .90 .82 .76

12 4 6” Wire Leads BH14AAW-ND† .77 .70 .64

13 6 6” Wire Leads BH26AAW-ND† 1.21 1.10 1.02

14 8 6” Wire Leads BH48AAW-ND† 1.44 1.30 1.20


“C” Cell Holders — RoHS Compliant 15 1 Solder Tabs BHCL-ND .63 .57 .52

16 2 Solder Tabs BH2CL-ND 1.21 1.10 1.01




“D” Cell Holders — RoHS Compliant 20 1 Solder Tabs BHDL-ND .71 .65 .60

21 2 Solder Tabs BH2DL-ND 1.35 1.22 1.13




• 21 mm (Inside Diameter) • Auto Plugs: (Fuse 3AG Style) • The length of the cord shown in each item is measured from the welding point

Digi-Key Price Each Fig. Description Part No. 1 10 100

Auto Power Plug — RoHS Compliant

ABS Fused Auto Plug with LED, Black APP-001-ND 2.20 1.98 1.95

41 ABS Fused Auto Plug with LED, Gray APP-002-ND 2.20 1.98 1.95

ABS Fused Auto Plug with No LED, Black APP-003-ND 2.01 1.81 1.79

42 Auto Locking Plug with LED, Black AP121-ND 3.63 3.28 2.88

43 Auto Locking Socket, Black (use with AP121-ND) AS212-ND 2.66 2.40 2.20

Auto Power Assemblies

44 Cigarette Inline Socket, Plastic ZA2010-ND◆ 1.11 1.00 .99

— Red Rubber Cap for Sockets ZA2081-R-ND .54 .49 .49

45

12’ (3.66 meters) Coil Cord Assembly

with 5A Fused Plug with LED ZA5070-ND◆ 6.31 5.69 5.61

46

12’ (3.66 meters) 18AWG Cord Assembly


47

8” (203.2mm) 18AWG Cord Assembly

with 10A Fused Plug with LED ZA5072-ND 6.01 5.42 5.34

6’ (1.83 meters) 18AWG Cord, 2.1mm x 5.5mm DC Plug

48


6’ (1.83 meters) 18AWG Cord, 2.5mm x 5.5mm DC Plug

with 5A Fused Plug with LED ZA5073-2.5-ND◆ 5.47 4.98 3.50

49

12’ (3.66 meters) Cord, 2.1mm x 5.5mm DC Plug,


50

1’ (0.30 meters) UL2468 Cord, Lead Acid Clip,

with 2A Fused Plug with LED ZA5076-ND 4.19 3.78 3.72

51

6’ (1.83 meters) Cord, 2.1mm x 5.5mm Rt. Angle DC Plug


52

6’ (1.83 meters) Cord, Rotary Plug,

with Lighted Switch and 5A Fuse BK-5072-ND◆ 7.81 5.35 5.05

8” (203.2mm), UL2468 Cord, Lead Acid Clip,

53 2.1mm x 5.5mm DC Plug ZA5350-ND◆ 2.82 2.54 2.51

8” (203.2mm), UL2468 Cord, Lead Acid Clip, No Connector ZA5350-B-ND◆ 2.46 2.22 2.19

54

Panel Mount, Power Socket, Insert Lock ZA2070-ND◆ 3.63 3.24 2.93

Panel Mount, Power Socket, Screw Lock ZA2060-ND◆ 2.81 2.51 2.27

55

Power Plug Splitter, One Male Plug-Two Receptacle

Sockets with LED ZA5018-ND 5.91 5.34 5.25

Cigarette Lighter Auto PowerBattery Holders (Cont.)

◆ RoHS Compliant


Coin Cell Holders — 12.5mm Cell Diameter — RoHS Compliant 18 1 PC Mount, Solder Legs, 2 ~ 2.5mm Cell Height BH501-ND 1.14 .96 .89

19

1 SMT, 1.6 ~ 2.5mm Cell Height BK-885-CT-ND .45 .38 .30

SMT, 1.6 ~ 2.5mm Cell Height BK-885-TR-ND 199.11/800

Coin Cell Holders — 16mm Cell Diameter — RoHS Compliant 20

1 PC Mount, Solder Legs, 1.6 ~ 3.2mm Cell Height BH600-ND .83 .76 .63

21 SMT, Temperature Range -40°C ~ 245°C BH600SM-ND 1.13 1.02 .86

Coin Cell Holders — 20mm Cell Diameter — RoHS Compliant

19 1 SMT, 1.6 ~ 3.2mm Cell Height BK-883-CT-ND .45 .38 .30

SMT, 1.6 ~ 3.2mm Cell Height BK-883-TR-ND 134.40/450

22 2 PC Mount, Solder Legs 2.5 ~ 3.2mm Cell Height BH800S-ND .60 .55 .54 23 1 PC Mount, Solder Legs BH32T-C-ND 1.04 .79 .66

24 1 Vertical, for BR, CR2032 Battery BS-5-ND .74 .67 .56

25 Horizontal, for BR, CR2032 Battery BS-3-ND .68 .62 .52

26

1 Horizontal, for 3V Lithium Battery,

CR2032 or BR2032 BS-7-ND .74 .67 .56

27 1 PC Mount, Press-to-Eject Feature, CR2032 Battery BA2032-ND 1.01 .69 .61

28 SMT, Press-to-Eject Feature, CR2032 Battery BA2032SM-ND 1.01 .69 .61

29 1

SMT for 2032, Gold BU2032-SM-HD-GCT-ND .90 .75 .60 SMT for 2032, Gold BU2032-SM-HD-GTR-ND 225.60/400

30 1 PC Mount for 2032, Gold BU2032-1-HD-G-ND .63 .57 .53

Coin Cell Holders — 23mm Cell Diameter — RoHS Compliant

19 1 SMT, 2 ~ 3mm Cell Height BK-884-CT-ND .45 .38 .30

SMT, 2 ~ 3mm Cell Height BK-884-TR-ND 134.40/450

22 2 PC Mount, Solder Legs, 2.5mm Cell Height BH906S-ND .98 .89 .74 23 1 PC Mount, Solder Legs, 2 ~ 3.2mm Cell Height BH908T-C-ND 1.04 .79 .66

Coin Cell Holders — 24-25mm Cell Diameter — RoHS Compliant

19 1 SMT, 2 ~ 3mm Cell Height BK-886-CT-ND .45 .38 .30

SMT, 2 ~ 3mm Cell Height BK-886-TR-ND 134.40/450

31 1 PC Mount, Solder Legs, 2 ~ 3mm Cell Height BH2430T-C-ND .95 .86 .75

32 PC Mount, Solder Legs, 7.7mm Cell Height BH1000-G-ND 1.19 1.10 .93

Coin Cell Holders — 30mm Cell Diameter — RoHS Compliant 33 1 PC Mount, Solder Legs, 3.2mm Cell Height BH3000-ND 1.19 1.10 .93

9-Volt Cell Holders / Snaps — RoHS Compliant

34

1 PC Mount, Solder Legs BH9V-PC-ND 1.15 1.04 .88

6” (152.40mm) Wire Leads BH9V-W-ND .86 .78 .77

35

6” (152.40mm) Battery Snap Cable BS6I-ND .30 .27 .25

1 12” (304.8mm) Battery Snap Cable BS12I-ND .31 .28 .26

36

1 6” (152.40mm) Heavy Duty Battery Snap Cable BS6I-HD-ND .33 .31 .28

12” (304.8mm) Heavy Duty Battery Snap Cable BS12I-HD-24AWG-ND .33 .30 .28

6” (152.40mm) I-Style Molded Case

37 1 Battery Snap Cable BS6I-MC-ND .41 .38 .34

12” (304.8mm) I-Style Molded Case Battery Snap Cable BS12I-MC-ND .44 .40 .36

38 1 PC Mount, Printed Circuit Board Type with Contacts BC9VPC-ND 1.39 1.11 1.00

Printed Circuit Snap-Ons (off board battery mount) — RoHS Compliant 39 — 9-Volt Female Snap-on BSPCF-ND .24 .22 .15 40 — 9-Volt Male Snap-on BSPCM-ND .19 .18 .12

◆ RoHS Compliant


L

Battery Clips, Contacts and Holders

◆ RoHS Compliant † “C” and “D” cell holders are dual clips only ‡ Figs. 36, 38, 48 and 49 sold by the pair

(Continued)

Compact Slimline

+POSneg -




Fig. 26 Fig. 27 Fig. 28 Fig. 31 Uses CR2032 Coin Cell Lithium Batteries

A

B

.142

.102Zone for optionaladhesive fixation

.433

1.154

.276

1.118

.142

.866

.217

.630

1.256

.079

1.625

2.562

.687

.7961.281

1.343

2.125

.687

.6251.000

Fig. 13 Fig. 14

Fig. 29 Fig. 30


“N” Aluminum Cell Holders 1 1 Cell 154K-ND◆ 1.98 1.84 1.05

2 2 Cell 155K-ND◆ 3.50 3.27 2.17

3 3 Cell 156K-ND 7.26 6.78 4.32

“AAA” Aluminum Cell Holders 1 1 Cell 137K-ND◆ 2.24 2.07 1.28

2 2 Cell 138K-ND 3.66 3.42 2.35

3 3 Cell 169K-ND 5.36 5.00 3.18

4 4 Cell 170K-ND◆ 7.32 6.84 4.37

“AAA” Plastic Cell Holders - PC Mount — RoHS Compliant 5 1 Cell 2466K-ND 1.07 .94 .75

6 2 Cell 2468K-ND 1.12 .98 .78

7 3 Cell 2479K-ND 1.30 1.21 1.04

8 4 Cell 2481K-ND 1.43 1.34 1.14

“AAA” Plastic Cell Holders - 6” Wire Leads — RoHS Compliant 5 1 Cell 2467K-ND 1.07 .94 .75

6 2 Cell 2469K-ND 1.12 .98 .78

7 3 Cell 2480K-ND 1.30 1.21 1.04

8 4 Cell 2482K-ND 1.43 1.34 1.14

“AA” Aluminum Cell Holders 1 1 Cell 139K-ND◆ 1.56 1.46 .83

2 2 Cell 140K-ND◆ 2.93 2.70 1.68

2 2 Cell 146K-ND◆ 3.43 3.14 2.95

3 3 Cell 171K-ND◆ 4.29 4.01 2.55

4 4 Cell 182K-ND◆ 6.09 5.69 3.78

9 2 Cell 189K-ND 2.47 2.28 1.46

10 4 Cell 192K-ND◆ 4.13 3.86 2.42

11 1 Cell 2222K-ND◆ 1.96 1.82 1.11

12 2 Cell 2223K-ND◆ 3.11 2.88 1.87

“AA” Plastic Cell Holders - PC Mount — RoHS Compliant 15 1 Cell 2460K-ND 1.07 .94 .75

16 2 Cell 2462K-ND 1.12 .98 .78

17 3 Cell 2464K-ND 1.30 1.21 1.04

18 4 Cell 2477K-ND 1.43 1.34 1.14

“AA” Plastic Cell Holders - 6” Wire Leads — RoHS Compliant 15 1 Cell 2461K-ND 1.07 .94 .75

16 2 Cell 2463K-ND 1.12 .98 .78

17 3 Cell 2465K-ND 1.30 1.21 1.04

18 4 Cell 2478K-ND 1.43 1.34 1.14

“AA” Plastic Cell Holders - with Snap-On Connector — RoHS Compliant 19 2 Cell 2474K-ND 1.12 .98 .78

20 3 Cell 2475K-ND 1.30 1.21 1.04

21 4 Cell 2476K-ND 1.43 1.33 1.14

Cell Lithium - Plastic Holders - PC Mount — RoHS Compliant 22B 1/2 AA 108KK-ND 1.51 1.40 .76

22B AA 1028K-ND 1.51 1.40 .76

22B 2/3 A 1029K-ND 1.51 1.40 .76

Lithium - Plastic Retaining Cover — RoHS Compliant 22A 1/2 AA 108CK-ND .45 .43 .41

22A AA 1028CK-ND .67 .59 .47

23 2/3 A 1029CK-ND .64 .56 .45

“C” Aluminum Cell Holders† 1 1 Cell 173K-ND◆ 1.92 1.79 1.02

2 2 Cell 174K-ND◆ 3.10 2.87 1.77

Digi-Key Price Each Fig. Description Part No. 1 10 100 3 3 Cell 187K-ND 6.48 4.86 3.80

9 2 Cell 185K-ND 2.73 2.52 1.56

10 4 Cell 196K-ND◆ 4.80 4.49 3.07

10 4 Cell 151K-ND◆ 5.91 5.41 5.07

11 1 Cell 2224K-ND◆ 2.01 1.87 1.07

12 2 Cell 2225K-ND 3.33 3.08 1.91

“C” Steel Cell Holders† — RoHS Compliant 13 1 Cell 2173K-ND 2.64 2.42 2.27

“D” Aluminum Cell Holders† 1 1 Cell 175K-ND◆ 2.06 1.91 1.15

2 2 Cell 176K-ND◆ 3.62 3.35 2.07

3 3 Cell 190-ND◆ 7.35 6.86 4.38

9 2 Cell 186K-ND 3.10 2.87 1.77

10 4 Cell 200K-ND◆ 5.79 5.41 3.75

11 1 Cell 2226K-ND◆ 2.58 2.38 1.46

12 2 Cell 2227K-ND 3.76 3.52 2.33

“D” Steel Cell Holders† — RoHS Compliant 14 1 Cell 2175K-ND 2.66 2.43 2.28

12mm Coin Cell Lithium “PC” Holders — RoHS Compliant 24 1 Cell 500K-ND 1.24 1.09 .68

25 2 Cell 501K-ND 1.96 1.83 1.59

16mm Coin Cell Lithium “PC” Holders — RoHS Compliant 24 1 Cell 502KE-ND 1.55 1.44 .89


24 1 Cell 103K-ND 1.55 1.44 .89

25 2 Cell 1026K-ND 1.70 1.58 .98


24 1 Cell 104K-ND 1.55 1.42 1.33

25 2 Cell 1027K-ND 1.70 1.58 .98


24 1 Cell 1025-7K-ND 1.70 1.58 .98

25 2 Cell 1025K-ND 1.70 1.58 .98

20mm Coin Cell Holder — RoHS Compliant 26 1 Cell 1066K-ND 1.55 1.44 .89

Vertical 20mm Coin Cell Holder — RoHS Compliant 27 1 Cell 1067K-ND 1.72 1.60 1.08

28 1 Cell 1065K-ND 1.72 1.60 1.08

Surface Mount Coin Cell Retainer Contacts — RoHS Compliant 29 12mm 3000K-ND .53 .47 .27

29 20mm 3002K-ND .55 .48 .28

29 23mm 3004K-ND .56 .49 .29

29 24mm 3006K-ND .60 .53 .29

Surface Mount Coin Cell Retainer Contacts - Cut Tape — RoHS Compliant 29 1 Cell, 20mm 3002KCT-ND .68 .40 .35

29 1 Cell, 24mm 3006KCT-ND 1.03 .94 .89

Surface Mount Coin Cell Retainer Contacts - Tape & Reel — RoHS Compliant 29 1 Cell, 20mm 3002KTR-ND 195.30/500

29 1 Cell, 24mm 3006KTR-ND 178.51/400

Thru Hole Mount Coin Cell Retainer Contacts — RoHS Compliant 30 12mm 3001K-ND .53 .47 .27

30 20mm 3003K-ND .55 .48 .28



L

Battery Clips, Contacts and Holders (Cont.)

Fig. 38

Fig. 44

Fig. 53 Fig. 54


Fig. 45 Fig. 46


+

.38

.55

.38

.55


.290

.335

Fig. 61


.625

.098

.437

1.031

.687

Fig. 37

Fig. 47

A B

Digi-Key Price Each Fig. Description Part No. 1 10 100 30 23mm 3005K-ND .56 .49 .29

30 23mm 3011K-ND .59 .52 .30

30 24mm 3007K-ND .60 .53 .29

30 24mm 3009K-ND .56 .51 .48

Surface Mount Coin Cell Holder - Bulk — RoHS Compliant 31 1 Cell, 20mm 1060K-ND 1.55 1.44 .89

32 1 Cell, 20mm 1061K-ND 1.93 1.79 1.20

32 2 Cell, 20mm 1062K-ND 1.93 1.79 1.20

32 1 Cell, 23mm 1071K-ND 1.93 1.79 1.20

Surface Mount Coin Cell Holder - Cut Tape — RoHS Compliant 29 1 Cell, 12mm 3000KCT-ND .69 .64 .60

Surface Mount Coin Cell Holder - Tape & Reel — RoHS Compliant 29 1 Cell, 12mm 3000KTR-ND 301.20/1000

31 1 Cell, 20mm 1060KTR-ND 465.14/500

32 1 Cell, 20mm 1061KTR-ND 264.50/200

32 2 Cell, 20mm 1062KTR-ND 264.50/200

32 1 Cell, 23mm 1071KTR-ND 264.50/200

9 Volt Plastic Holders — RoHS Compliant 33 1 Cell 1294K-ND 1.77 1.64 .96

34 1 Cell 1295K-ND 1.70 1.58 .91

9 Volt Aluminum Holders — RoHS Compliant 33 1 Cell 1291K-ND 2.79 2.55 2.39

34 1 Cell 1290K-ND 2.66 2.43 2.28

Insulated Polarizing Washers 35 Red 59K-ND◆ — .12 .08

35 Black 60K-ND — .12 .08

“AAA” Snap-In PC Battery Clip — RoHS Compliant 36 — 82K-ND‡ .63/2 .30 .16

“AA” Snap-In PC Battery Clip — RoHS Compliant 36 1 Cell 92K-ND‡ .63/2 .30 .16

“AAA”, “N” Surface Mount Battery Clip - Cut Tape — RoHS Compliant 36 1 Cell 55KCT-ND .62 .36 .32

“AAA”, “N” Surface Mount Battery Clip - Tape & Reel — RoHS Compliant 36 1 Cell 55KTR-ND 81.90/300

“9V” Steel Battery Clip — RoHS Compliant 37 Single 71K-ND .29 .27 .25

“AAA”, “AAAA”, “N” Snap-IN Battery Contact — RoHS Compliant 38 — 238K-ND‡ .34/2 .16 .12

9 Volt “PC” Snap-On Battery (on board battery mount) — RoHS Compliant 39 Male 593K-ND .46 .44 .24

40 Female 594K-ND .52 .46 .29

9 Volt Battery Straps — RoHS Compliant 41 Single 72K-ND 1.23 1.14 .66

42 Dual 227K-ND 2.70 2.49 1.55

Premium 9 Volt Battery Straps (I-Style) — RoHS Compliant 43 Single, 4” 2238K-ND .81 .72 .57

43 Single, 6” 2239K-ND .83 .73 .58

43 Single,6.5” 83K-ND 1.78 1.63 1.53

43 Single, 8” 2240K-ND .85 .75 .59

Premium 9 Volt Battery Straps (T-Style) — RoHS Compliant 44 Single, 4” 2241K-ND .86 .75 .60

44 Single, 6” 2242K-ND .87 .77 .61

44 Single, 8” 2243K-ND .89 .78 .62


Economy 9 Volt Battery Straps (I-Style) — RoHS Compliant 43 Single, 4” 232K-ND .44 .42 .29

43 Single, 6” 233K-ND .45 .43 .30

43 Single, 8” 234K-ND .46 .44 .30

Economy 9 Volt Battery Straps (T-Style) — RoHS Compliant 44 Single, 4” 235K-ND .48 .45 .32

44 Single, 6” 236K-ND .46 .41 .32

44 Single, 8” 237K-ND .47 .41 .33

Shielded 9 Volt Battery Straps (I-Style) — RoHS Compliant 45 Single, 4” 84-4K-ND .48 .43 .34

45 Single, 6” 84-6K-ND .50 .44 .36

45 Single, 8” 84-8K-ND .51 .45 .36

Shielded 9 Volt Battery Straps (T-Style) — RoHS Compliant 45 Single, 4” 81-4K-ND .48 .43 .34

45 Single, 6” 81-6K-ND .50 .44 .36

45 Single, 8” 81-8K-ND .51 .45 .36

Vertical “9V” PC Snap-On Connector — RoHS Compliant 46 — 968K-ND .89 .79 .65

“9V” Battery Snap-Ons — RoHS Compliant 47A Stud 261K-ND .08 .07 .05

47B Socket 269K-ND .16 .15 .14

Single “AA” Cell Contacts — RoHS Compliant 48 — 209K-ND‡ .49/2 .24 .16

Dual “AA” Cell Contacts — RoHS Compliant 49 — 210K-ND‡ .74/2 .35 .24

“A” ,“AA”, “9V” Surface Mount Cell Contacts - Cut Tape — RoHS Compliant 48 — 5231KCT-ND .63 .58 .55

“A” ,“AA”, “9V” Surface Mount Cell Contacts - Tape & Reel — RoHS Compliant 48 — 5231KTR-ND 70.75/250

“AAA” Snap-On Contacts — RoHS Compliant 48 — 204K-ND‡ .49/2 .24 .16

49 — 202K-ND‡ .74/2 .35 .24

“A”, “AA”, “9V” Spring Contacts — RoHS Compliant 50 — 5209K-ND — .42 .34

“A”, “AA” Battery Contacts — RoHS Compliant 51 Dual w/tabs 5211K-ND — .34 .24

52 Dual 5212K-ND — .41 .29

53 (+) Button 5224K-ND — .13 .09

54 (-) Spring 5202K-ND — .25 .18

55 (+) Button w/tabs 5223K-ND — .13 .09

56 (-) Spring w/tabs 5201K-ND — .22 .16

“AAA”, “AAAA”, “N” Battery Contacts — RoHS Compliant 53 (+) Button 5225K-ND — .10 .07

54 (-) Spring 5203K-ND — .34 .24

55 (+) Button w/tabs 5226K-ND — .13 .09

56 (-) Spring w/tabs 5204K-ND — .22 .16

57 Dual Left Side 5214K-ND — .31 .22

58 Dual Right Side 5213K-ND — .31 .22

“A”, “AA”, “C”, “D” Battery Contacts — RoHS Compliant 61 Spring 211K-ND .08 .08 .07

“A” PC Contacts — RoHS Compliant 59 (+) Button 595K-ND — .17 .12

60 (-) Spring 628K-ND — .77 .41

“AA”, “AAA”, “N” PC Contacts — RoHS Compliant 59 (+) Button 637K-ND — .16 .11

60 (-) Spring 629K-ND — .77 .41

◆ RoHS Compliant † “C” and “D” cell holders are dual clips only ‡ Figs. 36, 38, 48 and 49 sold by the pair



L

(Continued)◆ RoHS Compliant † Feathered Edge for lower noise. Please Note: Custom Fan Cable Assemblies available upon request.

DC Fans - Motor: • Brushless electronic commutation provided by dependable solid-state circuitry • 100% dielectric tested at 600 VAC/1 second/400 microamps maximum leakage • Polarity protected

CO

M

AIR ROTRO

N

FLIGHTTM

60

SHDHGFHFHGKJDFKDSJFKJ

ASJKDLAKJFJHKJFHGKFJ FKJGJGH

AJSKHFKJH DLKJHFK LSKDJFLS

MADE IN JAPAN

DC 12 V 14W 12 A

SA

CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN MEXICO

MAJOR DC

24 VDC 1.0A

PAT. #3747578

JD2486XDN P/N032273

R

FUSE PROTECTED

CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN MEXICO

MAJOR DC

24 VDC 1.0A

PAT. #3747578

JD2486XDN P/N032273SA

R

FUSE PROTECTED


CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN USA

BISQUIT DC

24 VDC 1.0A

PAT. #3747578


FUSE PROTECTED

R

Fig. 4 Fig. 5DC Brushless and Tachometer Fans

Dimensions Voltage Connection Power Running Life Digi-Key Price Each Comair Finger Price Fig. Family (mm) Nom. Range Type Bearing (Watts) Current RPM CFM Expectancy Part No. 1 25 Model No. Guards Each

Brushless DC Fans 25x10 12 6/13.8 Lead Wires Ball 1.2 .1A 13000 2.67 50,000 hrs. @ 25°C CR438-ND◆ 7.65 6.59 GDA2510-12BB CR181-ND◆ .52 40x10 12 6/13.8 Lead Wires Ball 1.08 .09A 7000 7.73 50,000 hrs. @ 25°C CR389-ND◆ 5.67 4.89 GDA4010-12BB CR230-ND◆ .63 40x10 24 12/27.6 Lead Wires Ball 2.16 .09A 7000 7.73 50,000 hrs. @ 25°C CR390-ND◆ 7.02 6.05 GDA4010-24BB CR230-ND◆ .63 40x20 12 6/13.8 Lead Wires Ball 1.44 .12A 8000 8.73 50,000 hrs. @ 25°C CR391-ND◆ 5.94 5.12 GDA4020-12BB CR230-ND◆ .63 40x20 24 12/27.6 Lead Wires Ball 1.68 .07A 8000 8.73 50,000 hrs. @ 25°C CR392-ND◆ 5.94 5.12 GDA4020-24BB CR230-ND◆ .63 40x28 12 6/13.8 Lead Wires Ball 2.4 .2A 8800 11.26 50,000 hrs. @ 25°C CR393-ND◆ 5.94 5.12 GDA4028-12BB CR230-ND◆ .63 52x10 12 6/13.8 Lead Wires Ball 1.68 .14A 6000 12.27 50,000 hrs. @ 25°C CR394-ND◆ 5.94 5.12 GDA5210-12BB CR388-ND◆ .57 60x25 12 6/13.8 Lead Wires Ball 1.68 .14A 4000 19.25 50,000 hrs. @ 25°C CR395-ND◆ 5.94 5.12 GDA6025-12BB CR221-ND◆ .65

Gryphon 60x25 24 12/27.6 Lead Wires Ball 3.36 .14A 4000 19.25 50,000 hrs. @ 25°C CR396-ND◆ 5.94 5.12 GDA6025-24BB CR221-ND◆ .65

80x25 12 6/13.8 Lead Wires Ball 2.04 .17A 3000 35.48 50,000 hrs. @ 25°C CR397-ND◆ 7.02 6.05 GDA8025-12BB CR180-ND◆ .90 80x25 24 12/27.6 Lead Wires Ball 3.60 .15A 3000 35.48 50,000 hrs. @ 25°C CR398-ND◆ 7.02 6.05 GDA8025-24BB CR180-ND◆ .90 92x25 12 6/13.8 Lead Wires Ball 2.76 .23A 2800 55.89 50,000 hrs. @ 25°C CR399-ND◆ 7.56 6.51 GDA9225-12BB CR230-ND◆ .63 92x25 24 12/27.6 Lead Wires Ball 5.28 .22A 2800 54.63 50,000 hrs. @ 25°C CR400-ND◆ 7.56 6.51 GDA9225-24BB CR220-ND◆ .74 120x25 12 6/13.8 Lead Wires Ball 4.8 .40A 2400 69.36 50,000 hrs. @ 25°C CR401-ND◆ 8.73 7.52 GDA1225-12BB CR210-ND◆ 1.67 120x25 24 12/27.6 Lead Wires Ball 8.4 .35A 2400 69.36 50,000 hrs. @ 25°C CR402-ND◆ 8.73 7.52 GDA1225-24BB CR210-ND◆ 1.67 120x38 12 6/13.8 Lead Wires Ball 7.2 .60A 3000 128.27 50,000 hrs. @ 25°C CR403-ND◆ 13.41 11.55 GDA1238-12BB CR210-ND◆ 1.67 120x38 24 12/27.6 Lead Wires Ball 14.4 .60A 3000 126.67 50,000 hrs. @ 25°C CR404-ND◆ 13.41 11.55 GDA1238-24BB CR210-ND◆ 1.67 120x38 48 24/55.2 Lead Wires Ball 16.8 .35A 3000 128.27 50,000 hrs. @ 25°C CR405-ND◆ 14.13 12.17 GDA1238-48BB CR210-ND◆ 1.67

25x10 12 6/14 Lead Wires Ball 0.8 70mA 10000 1.40 50,000 hrs. @ 25°C CR011-ND◆ 17.08 14.73 CR0212LB-G50 CR181-ND◆ .52

40x10 12 6/14 Lead Wires Ball 1.2 100mA 6000 6.80 50,000 hrs. @ 25°C CR015-ND◆ 11.89 10.25 CR0412HB-G70 CR230-ND◆ .63

Flight LT 40x20 12 6/14 Lead Wires Ball 1.4 130mA 8500 10.80 50,000 hrs. @ 25°C CR016-ND◆ 11.89 10.25 CR0412HB-C50 CR230-ND◆ .63

25,40,52

40x20 24 21.6/26.4 Lead Wires Ball 1.8 75mA 8500 10.8 50,000 hrs. @ 25°C CR360-ND◆ 11.89 10.25 CR0424HB-C50 CR230-ND◆ .63 52x15 12 6/14 Lead Wires Ball 1.2 100mA 4600 12.00 50,000 hrs. @ 25°C CR022-ND◆ 12.33 10.63 CR0512HB-D71 CR388-ND◆ .57 60x25 12 6/14 Lead Wires Ball 2.5 210mA 5000 18 60,000 hrs. @ 25°C CR001-ND◆ 33.21 26.34 FS12B3 CR221-ND◆ .65 60x25 24 12/28 Lead Wires Ball 1.9 80mA 5000 18 60,000 hrs. @ 25°C CR002-ND◆ 33.21 26.34 FS24B3 CR221-ND◆ .65

Flight II 60x25 12 6/14 Lead Wires Ball 1.0 84mA 3500 12 60,000 hrs. @ 40°C CR003-ND 33.21 26.34 FS12H3 CR221-ND◆ .65

60

60x25 24 12/28 Lead Wires Ball 1.1 46mA 3500 12 60,000 hrs. @ 25°C CR004-ND◆ 34.08 27.03 FS24H3 CR221-ND◆ .65 60x25 5 4.5/5.5 Lead Wires Ball 2.0 400mA 5000 18 60,000 hrs. @ 25°C CR346-ND◆ 23.67 20.39 FS05B3 CR221-ND◆ .65 60x25 5 4.5/5.5 Lead Wires Ball 1.0 190mA 3500 12 60,000 hrs. @ 25°C CR347-ND◆ 21.15 18.22 FS05H3 CR221-ND◆ .65 60x25 48 24/56 Lead Wires Ball 4.0 80mA 5930 23 60,000 hrs. @ 25°C CR348-ND◆ 26.55 22.87 FS48K3 CR221-ND◆ .65

Flight LT 60x15 12 6/14 Lead Wires Ball 1.6 130mA 4500 16.60 50,000 hrs. @ 25°C CR023-ND◆ 12.73 10.98 CR0612HB-D71GL CR221-ND◆ .65

60

60x25 12 6/14 Lead Wires Ball 2.8 230mA 4500 23.20 50,000 hrs. @ 25°C CR024-ND◆ 12.73 10.98 CR0612HB-A70GL CR221-ND◆ .65 60x25 24 12/28 Lead Wires Ball 3.6 150mA 4500 23.20 50,000 hrs. @ 25°C CR026-ND◆ 12.73 10.98 CR0624HB-A70GL CR221-ND◆ .65 80x25 12 6/14 Lead Wires Ball 2.0 165mA 3600 37 60,000 hrs. @ 25°C CR005-ND◆ 33.79 26.80 FE12B3 CR180-ND◆ .90 Flight II 80x25 24 12/28 Lead Wires Ball 2.0 87mA 3600 37 60,000 hrs. @ 25°C CR006-ND◆ 33.79 26.80 FE24B3 CR180-ND◆ .90 80 80x25 12 6/14 Lead Wires Ball 1.0 89mA 2700 27 60,000 hrs. @ 25°C CR007-ND◆ 34.80 27.60 FE12H3 CR180-ND◆ .90 80x25 24 12/28 Lead Wires Ball 1.2 48mA 2700 27 60,000 hrs. @ 25°C CR008-ND◆ 34.80 27.60 FE24H3 CR180-ND◆ .90

Flight LT 80x25 12 6/14 Lead Wires Ball 3.0 250mA 3010 38.60 50,000 hrs. @ 25°C CR030-ND◆ 13.08 11.28 CR0812HB-A70GL CR180-ND◆ .90

80

80x25 12 6/14 Lead Wires Ball 1.8 150mA 2440 31.40 50,000 hrs. @ 25°C CR031-ND 13.08 11.28 CR0812MB-A70GL CR180-ND◆ .90 80x25 24 12/28 Lead Wires Ball 3.8 160mA 3010 38.60 50,000 hrs. @ 25°C CR032-ND◆ 13.08 11.28 CR0824HB-A70GL CR180-ND◆ .90 80x32 12 6/14 Lead Wires Sleeve 3.4 280mA 3400 33 55,000 hrs. @ 40°C CR009-ND◆ 17.55 15.12 ST12A3 CR180-ND◆ .90 80x32 24 12/28 Lead Wires Sleeve 3.3 140mA 3400 33 55,000 hrs. @ 40°C CR012-ND◆ 17.01 14.65 ST24A3 CR180-ND◆ .90

Sprint 80x32 12 6/14 Lead Wires Ball 3.4 280mA 3400 33 78,000 hrs. @ 40°C CR014-ND◆ 19.35 16.67 ST12B3 CR180-ND◆ .90

1 80x32 24 12/28 Lead Wires Ball 3.3 140mA 3400 33 78,000 hrs. @ 40°C CR017-ND◆ 19.35 16.67 ST24B3 CR180-ND◆ .90 80x32 5 4.5/5.5 Lead Wires Ball 2.3 460mA 3400 33 78,000 hrs. @ 40°C CR353-ND◆ 27.45 23.64 ST05B3 CR180-ND◆ .90 80x32 12 6/14 Lead Wires Ball 6.2 520mA 4700 45 78,000 hrs. @ 40°C CR354-ND◆ 24.75 21.32 ST12Z3 CR180-ND◆ .90 80x42 12 6/14 Lead Wires Ball 3.0 250mA 3500 35 80,000 hrs. @ 40°C CR019-ND◆ 26.69 23.26 SD12B1 CR180-ND◆ .90 80x42 12 6/14 Terminal Ball 3.0 250mA 3500 35 80,000 hrs. @ 40°C CR027-ND◆ 27.65 24.10 SD12B2 CR180-ND◆ .90 Sprite 80x42 24 12/28 Lead Wires Ball 3.0 130mA 3500 35 83,000 hrs. @ 40°C CR020-ND◆ 27.04 23.57 SD24B1 CR180-ND◆ .90 80x42 48 24/56 Lead Wires Ball 3.0 60mA 3500 35 83,000 hrs. @ 40°C CR021-ND◆ 27.65 24.10 SD48B1 CR180-ND◆ .90 80x42 48 24/56 Terminal Ball 3.0 60mA 3500 35 83,000 hrs. @ 40°C CR236-ND◆ 27.65 24.10 SD48B2 CR180-ND◆ .90 92x25 12 6/14 Lead Wires Ball 2.4 202mA 2800 45 60,000 hrs. @ 25°C CR034-ND◆ 36.98 29.33 FN12B3 CR220-ND◆ .74 92x25 12 6/14 Lead Wires Ball 1.5 124mA 2350 37 60,000 hrs. @ 25°C CR036-ND 36.98 29.33 FN12C3 CR220-ND◆ .74 Flight II 92x25 24 12/28 Lead Wires Ball 2.4 100mA 2800 45 60,000 hrs. @ 25°C CR237-ND◆ 24.80 20.46 FN24B3 CR220-ND◆ .74 90 92x25 12 6/14 Lead Wires Ball 5.1 423mA 3850 60 60,000 hrs. @ 25°C CR349-ND◆ 24.30 20.93 FN12K3 CR220-ND◆ .74 92x25 24 12/28 Lead Wires Ball 5.5 230mA 3800 60 60,000 hrs. @ 25°C CR359-ND◆ 24.30 20.93 FN24K3 CR220-ND◆ .74 92x25 48 24/56 Lead Wires Ball 2.9 65mA 2800 45 60,000 hrs. @ 25°C CR350-ND◆ 22.32 19.22 FN48B3 CR220-ND◆ .74

Flight LT 92x25 12 6/14 Lead Wires Ball 4.3 360mA 3000 48.40 50,000 hrs. @ 25°C CR035-ND◆ 13.60 11.73 CR0912HB-A70GL CR220-ND◆ .74

90 92x25 24 12/28 Lead Wires Ball 4.8 200mA 3000 48.40 50,000 hrs. @ 25°C CR037-ND◆ 13.60 11.73 CR0924HB-A70GL CR220-ND◆ .74 120x25 12 6/14 Lead Wires Ball 4.3 360mA 2950 86 60,000 hrs. @ 25°C CR038-ND◆ 36.98 29.33 FT12B3 CR210-ND◆ 1.67 Flight II 120x25 24 12/28 Lead Wires Ball 4.3 180mA 2950 86 60,000 hrs. @ 25°C CR039-ND◆ 35.35 28.04 FT24B3 CR210-ND◆ 1.67 120 120x25 12 6/14 Lead Wires Ball 1.6 130mA 2000 61 60,000 hrs. @ 25°C CR040-ND 35.09 27.83 FT12M3 CR210-ND◆ 1.67 120x25 24 12/28 Lead Wires Ball 1.9 80mA 2000 61 60,000 hrs. @ 25°C CR041-ND 35.09 27.83 FT24M3 CR210-ND◆ 1.67 120x32 12 6/14 Lead Wires Sleeve 7.9 660mA 3700 102 50,000 hrs. @ 40°C CR042-ND◆ 18.72 16.12 MC12A3 CR210-ND◆ 1.67 120x32 24 12/28 Lead Wires Sleeve 6.7 280mA 3700 102 50,000 hrs. @ 40°C CR046-ND◆ 18.72 16.12 MC24A3 CR210-ND◆ 1.67 120x32 12 6/14 Lead Wires Sleeve 2.2 180mA 2150 58 50,000 hrs. @ 40°C CR043-ND◆ 19.35 16.67 MC12E3 CR210-ND◆ 1.67 120x32 24 12/28 Lead Wires Sleeve 2.1 85mA 2150 58 50,000 hrs. @ 40°C CR047-ND◆ 19.35 16.67 MC24E3 CR210-ND◆ 1.67 Muffin 120x32 12 6/14 Lead Wires Ball 7.9 660mA 3700 102 75,000 hrs. @ 40°C CR051-ND◆ 21.33 18.37 MC12B3 CR210-ND◆ 1.67

120x32 24 12/28 Lead Wires Ball 5.5 230mA 3700 102 75,000 hrs. @ 40°C CR055-ND◆ 21.33 18.37 MC24B3 CR210-ND◆ 1.67

120x32 48 22/56 Lead Wires Ball 8.4 180mA 3700 102 78,000 hrs. @ 40°C CR240-ND◆ 21.33 18.37 MC48B3 CR210-ND◆ 1.67 120x32 24 12/28 Lead Wires Ball 4.8 200mA 2850 80 78,000 hrs. @ 40°C CR241-ND◆ 21.33 18.37 MC24H3 CR210-ND◆ 1.67 120x32 24 12/28 Lead Wires Ball 10.6 440mA 4200 118 78,000 hrs. @ 40°C CR351-ND◆ 23.13 19.92 MC24K3 CR210-ND◆ 1.67 119x39 24 12/28 Lead Wires Ball 6.0 250mA 3100 110 83,000 hrs. @ 40°C CR070-ND◆† 43.51 39.51 MD24B1 CR210-ND◆ 1.67 119x39 12 6/14 Terminal Ball 6.0 500mA 3100 110 83,000 hrs. @ 40°C CR072-ND◆† 43.51 39.51 MD12B2 CR210-ND◆ 1.67

119x39 24 12/28 Terminal Ball 6.0 250mA 3100 110 83,000 hrs. @ 40°C CR073-ND◆† 43.51 39.51 MD24B2 CR210-ND◆ 1.67

Muffin XL

119x39 48 24/56 Terminal Ball 6.0 125mA 3100 110 83,000 hrs. @ 40°C CR074-ND◆† 43.51 39.51 MD48B2 CR210-ND◆ 1.67 119x39 12 6/14 Lead Wires Ball 6.0 500mA 3100 110 83,000 hrs. @ 40°C CR069-ND◆† 43.51 39.51 MD12B1 CR210-ND◆ 1.67 119x39 48 24/56 Lead Wires Ball 6.0 125mA 3100 110 83,000 hrs. @ 40°C CR071-ND◆† 43.51 39.51 MD48B1 CR210-ND◆ 1.67 119x39 12 6/14 Lead Wires Ball 2.4 200mA 2230 75 83,000 hrs. @ 40°C CR262-ND◆† 45.50 37.54 WD12C3 CR210-ND◆ 1.67 Whisper 119x39 24 12/28 Lead Wires Ball 2.4 100mA 2230 75 83,000 hrs. @ 40°C CR263-ND◆† 45.50 37.54 WD24C3 CR210-ND◆ 1.67 XL 119x39 12 6/14 Lead Wires Ball 1.2 100mA 1635 55 83,000 hrs. @ 40°C CR264-ND◆† 45.50 37.54 WD12M3 CR210-ND◆ 1.67 119x39 24 12/28 Lead Wires Ball 1.2 52mA 1635 55 83,000 hrs. @ 40°C CR265-ND◆† 46.50 38.37 WD24M3 CR210-ND◆ 1.67

Muffin XP 120x38 24 12/28 Lead Wires Sleeve 7.0 290mA 3000 110 78,000 hrs. @ 40°C CR342-ND◆ 24.03 20.70 MS24B3 CR210-ND◆ 1.67

120x38 48 24/56 Lead Wires Sleeve 7.4 150mA 3000 110 78,000 hrs. @ 40°C CR343-ND◆ 24.03 20.70 MS48B3 CR210-ND◆ 1.67 5 Diplomat 133x91 24 12/28 Lead Wires Ball 26.0 1.1A 3400 170 35,000 hrs. @ 50°C CR289-ND◆ 71.82 61.85 DDF24B1 CR210-ND◆ 1.67 127x38 12 6/14 Terminal Ball 15.0 1250mA 3250 150 82,500 hrs. @ 50°C CR266-ND◆† 51.00 42.08 GL12B4 CR200-ND◆ 2.43 1 Galaxy 127x38 24 12/28 Terminal Ball 15.0 625mA 3250 150 82,500 hrs. @ 50°C CR267-ND◆† 53.60 44.22 GL24B4 CR200-ND◆ 2.43 127x38 48 24/56 Terminal Ball 15.0 310mA 3250 150 82,000 hrs. @ 50°C CR268-ND◆† 53.60 44.22 GL48B4 CR200-ND◆ 2.43 172x51 24 12/28 Terminal Ball 20.3 850mA 3500 235 62,000 hrs. @ 50°C CR242-ND◆† 70.00 57.75 PQ24B4 CR206-ND◆ 2.75

2

Patriot 172x51 48 24/56 Terminal Ball 20.1 420mA 3500 235 62,000 hrs. @ 50°C CR243-ND◆† 70.00 57.75 PQ48B4 CR206-ND◆ 2.75

172x150x51 24 12/28 Terminal Ball 20.3 850mA 3500 235 62,000 hrs. @ 50°C CR291-ND◆† 68.13 58.67 JQ24B4 CR196-ND◆ 2.93 3

Major 172x150x51 48 24/56 Terminal Ball 20.1 420mA 3500 235 62,000 hrs. @ 50°C CR292-ND◆† 68.13 58.67 JQ48B4 CR196-ND◆ 2.93

Quiet

172x150x51 12 6/14 Terminal Ball 14.6 1215mA 3000 200 62,000 hrs. @ 50°C CR293-ND◆† 69.75 60.07 JQ12C4 CR196-ND◆ 2.93

2 Falcon 172x55 24 12/28 Lead Wires Ball 41.0 1.48A 3400 300 62,000 hrs. @ 50°C CR295-ND◆† 95.31 82.08 FD24B3 CR196-ND◆ 2.93

172x150x55 12 6/14 Lead Wires Ball 39.6 3A 3400 300 62,000 hrs. @ 50°C CR297-ND◆† 95.31 82.08 MT12B3 CR196-ND◆ 2.93 3 Maltese 172x150x55 24 12/28 Lead Wires Ball 41.0 1.48A 3400 300 62,000 hrs. @ 50°C CR298-ND◆† 95.31 82.08 MT24B3 CR196-ND◆ 2.93 172x150x55 48 24/56 Lead Wires Ball 34.5 .72A 3400 300 62,000 hrs. @ 50°C CR299-ND◆† 95.31 82.08 MT48B3 CR196-ND◆ 2.93

254x89 24 12/28 Lead Wires Ball 29.0 1.2A 1650 550 60,000 hrs. @ 50°C CR302-ND◆† 86.94 74.87 CD24B3 CR182-ND◆ 1.83

2 Caravel 254x89 48 24/56 Lead Wires Ball 30.2 .63A 1650 550 60,000 hrs. @ 50°C CR303-ND◆† 89.01 76.65 CD48B3 CR182-ND◆ 1.83

Whiffet 80x32 12 6/14 Lead Wires Ball 5.1 420mA 4050 15 80,000 hrs. @ 25°C CR304-ND◆ 34.02 29.30 WT12B3 — —

4

Blower 80x32 24 12/28 Lead Wires Ball 5.1 200mA 4050 15 80,000 hrs. @ 25°C CR305-ND◆ 34.02 29.30 WT24B3 — —

Biscuit 121x31 12 9/14 Lead Wires Sleeve 11.0 900mA 3050 25 50,000 hrs. @ 40°C CR085-ND◆ 35.50 29.29 BD12A3 — —

Blower 121x31 24 18/28 Lead Wires Sleeve 11.0 480mA 3050 25 50,000 hrs. @ 40°C CR086-ND◆ 35.50 29.29 BD24A3 — —


L

DC Brushless and Tachometer Fans (Cont.)

◆ RoHS Compliant † Feathered Edge for lower noise. Please Note: Custom Fan Cable Assemblies available upon request.

◆ RoHS Compliant

Dimensions Voltage Power Running Termination Noise Digi-Key Price Each Comair Model mm Nom. (VDC) (W) Current (A) RPM CFM Wire Leads (dBA) Part No. 1 25 Part No. DD402112K1A 101.6 x 55.1 12 33 2.750 5865 115 22 AWG 68 CR410-ND◆ 101.56 86.63 039823 DD402124B1R 101.6 x 55.1 24 22.1 .920 4950 100 22 AWG 66.1 CR411-ND◆ 101.56 86.63 039821 DD402148B1R 101.6 x 55.1 48 18.2 .380 4950 100 22 AWG 66.1 CR412-ND◆ 101.64 86.70 039822 DD402148K1R 101.6 x 55.1 48 39 .810 5865 115 22 AWG 68 CR413-ND◆ 92.87 79.22 039825 DD402124K1R 101.6 x 55.1 24 32 1.330 5865 115 22 AWG 68 CR380-ND◆ 103.85 88.59 039824 DD523612B1A 133 x 91 12 30 2.500 3400 175 22 AWG 62.9 CR414-ND◆ 119.34 101.79 039829 DD523624B1A 133 x 91 24 26 1.100 3400 175 22 AWG 62.9 CR415-ND◆ 119.34 101.79 039830 DD523648B1A 133 x 91 48 24 .510 3400 175 22 AWG 62.9 CR416-ND◆ 119.34 101.79 039831 DD523612K1A 133 x 91 12 45.6 3.800 3980 200 22 AWG 65.9 CR381-ND◆ 119.34 101.79 039832 DD523624K1A 133 x 91 24 38.4 1.600 3980 200 22 AWG 65.9 CR382-ND 93.60 80.60 039833 DD523648K1A 133 x 91 48 31.2 .650 3980 200 22 AWG 65.9 CR383-ND◆ 93.60 80.60 039834 DD692112K1A 175 x 53 12 36 3.000 3085 250 22 AWG 67.2 CR417-ND◆ 157.86 134.65 039841 DD692124K1A 175 x 53 24 30.7 1.280 3085 250 22 AWG 67.2 CR418-ND◆ 157.86 134.65 039842 DD692148K1A 175 x 53 48 31.2 .650 3085 250 22 AWG 67.2 CR419-ND◆ 157.86 134.65 039843 DD692712B1A 175 x 69 12 32.5 2.700 2848 300 22 AWG 65 CR420-ND◆ 158.36 135.07 039847 DD692712K1A 175 x 69 12 56.4 4.700 3100 350 22 AWG 68.8 CR421-ND◆ 158.36 135.07 039850 DD692724B1A 175 x 69 24 30.7 1.270 2848 300 22 AWG 65 CR422-ND◆ 158.36 135.07 039848 DD692724K1A 175 x 69 24 44.8 1.867 3100 350 22 AWG 68.8 CR423-ND◆ 158.36 135.07 039851 DD692748B1A 175 x 69 48 31.9 .664 2848 300 22 AWG 65 CR424-ND◆ 158.36 135.07 039849 DD692748K1A 175 x 69 48 44.7 .932 3100 350 22 AWG 68.8 CR425-ND◆ 158.36 135.07 039852 DD752712B1A 192 x 69 12 25.2 2.100 2020 260 22 AWG 58.2 CR426-ND◆ 172.13 146.82 039856 DD752712K1A 192 x 69 12 42 3.500 2230 300 22 AWG 61 CR427-ND◆ 172.13 146.82 039859 DD752724B1A 192 x 69 24 27.4 1.140 2020 260 22 AWG 58.2 CR428-ND◆ 172.13 146.82 039857 DD752748B1A 192 x 69 48 27.3 .569 2020 260 22 AWG 58.2 CR429-ND◆ 172.13 146.82 039858 DD752748K1A 192 x 69 48 33.6 .700 2230 300 22 AWG 61 CR385-ND 135.00 116.25 039861 DD892824B1A 226 x 71 24 63.7 2.656 2670 500 20 AWG 73 CR430-ND◆ 204.26 174.22 039864 DD892848B1A 226 x 71 48 64 1.340 2670 500 20 AWG 73 CR431-ND◆ 204.26 174.22 039865 DD892824K1A 226 x 71 24 100 4.200 2750 565 20 AWG 75 CR386-ND 249.49 212.81 039866 DD893924B1T 226 x 99 24 100 4.200 2450 660 20 AWG 73 CR432-ND◆ 256.00 218.36 039870 DD893948B1A 226 x 99 48 100 2.100 2450 660 20 AWG 73 CR433-ND◆ 256.00 218.36 039871 DD983524B1A 250 x 89 24 100 4.200 2350 700 20 AWG 74 CR434-ND◆ 198.24 169.09 039876 DD983548B1A 250 x 89 48 100 2.100 2350 700 20 AWG 74 CR435-ND◆ 198.88 169.64 039877 DD114924B1A 280 x 125 24 115 4.800 1800 1000 20 AWG 68.6 CR436-ND◆ 204.37 174.32 039882 DD114948B1A 280 x 125 48 115 2.400 1800 1000 20 AWG 68.6 CR437-ND◆ 204.75 174.64 039883

NEW! DC Brushless Motorized Impellers and Tachometer/PWM Control – Diplomat E SeriesSpecifications: • Operating Temperature: -10°C ~ 70°C • Storage Temperature: -40° ~ 85°C • Termination: 12” Lead Wires (22 AWG) Features: • Ball Bearings • Outstanding CFM performance in high pressure systems • Soft Start Capability

DC Brushless Motorized Impellers – Diplomat SeriesDiplomat series of backward curve impellers can be used for pressurization or evacuation of en closures Applications: • Telecommunication Equipment • Computers • Heating and Air Con di tion ing • Refrigeration • Heat Exchangers • Power Supplies • Applications with many

elec tron ics con densed into a small space which create pressure that resists the passage of air. Features: • 12” Leadwires (30.48cm) • TTL Tach Output • Ball Bearings • High Airflow in high pressure en vi ron ments

NEW! DC Brushless and Tachometer/PWM Control Fans and Blowers – E SeriesSpecifications: • Operating Temperature: -10°C ~ 70°C • Storage

Tem per a ture: -40°C ~ 85°C • Termination: 12” Lead Wires (22 AWG)Features: • Ball Bearings • Outstanding Airflow


Dimensions Oper. Voltage Power Running Noise Life Digi-Key Price Each Comair Fig. Family Model Type mm Nom. Range (Watts) Current (A) RPM CFM (dBA) Expectancy Part No. 1 25 Part No. Mixtus 7.9” MFSE24Z3E2 Fan 200 x 70 24 16 ~ 32 96 4.0 4500 515 65.4 70,000 hrs. @ 40°C CR439-ND 199.07 169.80 041036

1 MFSE48Z3E2 Fan 200 x 70 48 24 ~ 72 96 2.0 4500 515 65.4 70,000 hrs. @ 40°C CR440-ND 199.07 169.80 041037

Mixtus 6.8”

MFX24Z3E2 Fan 172 x 51 24 16 ~ 32 96 4.0 5050 390 69.1 50,000 hrs. @ 40°C CR441-ND 123.93 105.71 040799

MFX48Z3E2 Fan 172 x 51 48 24 ~ 72 96 2.0 5050 390 69.1 50,000 hrs. @ 40°C CR442-ND 123.93 105.71 041040

Major XT MJD24U3E2 Fan 175 x 150 x 38 24 16 ~ 32 40 1.9 4846 325 63.1 55,000 hrs. @ 40°C CR444-ND 68.20 56.27 040727

2 Major

JQD24U3E2 Fan 172 x 51 24 16 ~ 32 45.6 1.7 4830 330 64 55,000 hrs. @ 40°C CR449-ND 77.80 64.19 041049

JQD48U3E2 Fan 172 x 51 48 28 ~ 72 45.6 0.85 4830 330 64 55,000 hrs. @ 40°C CR450-ND 77.80 64.19 040422

3

Muffin XL MDD24U3E2 Fan 120 x 39 24 16 ~ 32 38 1.6 6300 210 65 65,000 hrs. @ 40°C CR445-ND 46.40 38.28 040403

MDD48U1E2 Fan 120 x 39 48 24 ~ 72 38 0.8 6300 210 65 65,000 hrs. @ 40°C CR446-ND 46.40 38.28 040775

4

Galaxy GLD24U3E2 Fan 127 x 38 24 16 ~ 28 38.4 1.50 5200 240 66 80,000 hrs. @ 40°C CR447-ND 62.20 51.32 040409

GLD48U3E2 Fan 127 x 38 48 40 ~ 72 38.4 0.72 5200 240 66 80,000 hrs. @ 40°C CR448-ND 62.20 51.32 040702

5

Patriot PQD24U3E2 Fan 172 x 51 24 16 ~ 32 45.6 1.70 4830 330 64 55,000 hrs. @ 40°C CR451-ND 77.80 64.19 040427

PQD48U3E2 Fan 172 x 51 48 28 ~ 72 45.6 0.85 4830 330 64 55,000 hrs. @ 40°C CR452-ND 77.80 64.19 041022

6

Ambassador AMD12K3E2 Blower 97 x 33 12 7 ~ 13.5 15 1.3 4400 36 61 70,000 hrs. @ 40°C CR464-ND 36.25 28.75 041066

AMD24Z3E2 Blower 97 x 33 24 16 ~ 28 15 0.8 5000 41 69 70,000 hrs. @ 40°C CR463-ND 37.12 29.44 041065

Dimension Voltage (VDC) Power Running Noise Digi-Key Price Each Comair Model mm Nom. Range (W) Current (A) RPM CFM (dBA) Part No. 1 25 Part No. DDE892824Z1E2 228 x 71 24 16 ~ 32 142 5.20 3530 750 80 CR461-ND 201.79 172.12 041018 DDE892848Z1E2 230 x 71 48 28 ~ 72 142 3.40 3530 750 80 CR462-ND 201.79 172.12 041021 DDE893524Z1E2 227 x 89 24 16 ~ 32 142 5.20 3530 750 78.7 CR459-ND 202.64 172.84 041006 DDE893548Z1E2 227 x 89 48 28 ~ 72 142 2.60 3530 750 78.7 CR460-ND 202.64 172.84 041009 DDE893924Z1E2 226 x 99 24 16 ~ 32 225 9.40 3350 865 80 CR457-ND 204.24 174.21 040994 DDE893948Z1E2 226 x 99 48 28 ~ 72 225 4.70 3350 865 80 CR458-ND 204.24 174.21 040997 DDE983524Z1E2 250 x 89 24 16 ~ 32 216 9.00 3250 1005 80.6 CR455-ND 209.44 178.64 040981 DDE983548Z1E2 250 x 89 48 28 ~ 72 216 4.50 3250 1005 80.6 CR456-ND 209.44 178.64 040984

Dimensions Voltage Connection Power Running Life Digi-Key Price Each Comair Finger Price Fig. Family (mm) Nom. Range Type Bearing (Watts) Current RPM CFM Expectancy Part No. 1 25 Model No. Guards Each Biscuit 121x31 12 6/14 Lead Wires Ball 11.0 900mA 3050 25 78,000 hrs. @ 40°C CR247-ND◆ 41.00 33.83 BD12B3 — — Blower 121x31 24 12/28 Lead Wires Ball 11.0 480mA 3050 25 78,000 hrs. @ 40°C CR248-ND◆ 39.90 32.92 BD24B3 — — 4 127x41 12 6/14 Lead Wires Ball 20.0 1670mA 4000 33 83,000 hrs. @ 40°C CR306-ND◆ 34.65 29.84 VK12B3 — —

Viking 127x41 24 12/28 Lead Wires Ball 20.0 830mA 4000 33 83,000 hrs. @ 40°C CR307-ND◆ 33.57 28.91 VK24B3 — —

Spinnaker 162x41 24 12/28 Lead Wires Ball 30.0 1300mA 2500 60 62,000 hrs. @ 50°C CR249-ND◆ 73.70 60.81 SPD24B1 — —

Tachometer Output DC Fans — RoHS Compliant Muffin 120x32 12 6/14 Lead Wires Ball 7.9 660mA 3700 102 78,000 hrs. @ 40°C CR339-ND 22.05 18.99 MC12B7 CR210-ND◆ 1.67

1 120x32 24 12/28 Lead Wires Ball 5.5 230mA 3700 102 78,000 hrs. @ 40°C CR340-ND 24.39 21.01 MC24B7 CR210-ND◆ 1.67

Muffin 119x39 12 6/14 Lead Wires Ball 6.0 500mA 3100 110 83,000 hrs. @ 40°C CR344-ND† 39.15 33.72 MD12B5 CR210-ND◆ 1.67 XL 119x39 24 12/28 Lead Wires Ball 6.0 250mA 3100 110 83,000 hrs. @ 40°C CR345-ND† 38.07 32.79 MD24B5 CR210-ND◆ 1.67


L

Fan Accessories

A

Dimensions (mm) Fits Fan Center No. of Digi-Key Price Each A Thick Size (mm) Dim. (mm) Rings Material Part No. 1 25 50

Finger Guards 222.00 17.78 176 Sq. 99 open 3 Metal CR179-ND 6.56 5.65 5.19

Digi-Key Price Each Description Fits Fan Size (mm) Part No. 1 25 50

Filters and Filter Accessories Filter Assembly 119 and 120 Square CR209-ND 16.59 12.64 11.46

Clips #6-32 Flush Mounting Clip Major, Major DC, Whisper CR187-ND .17 .15 .14

#6-32 Mounting Clip All XL Models CR192-ND .15 .12 .11

◆RoHS Compliant † Feathered Edge for lower noise * Reverse Flow

AC FansAC Fans - Motor: Two-pole shaded pole induction motor. All 50/60Hz, impedance or thermally protected. 100% dielectric tested at 1800 VAC/1 sec./500 microamps maximum leakage.

Dim. (mm) Fits Fan Digi-Key Price Each Qualtek Fig. Description A B Size (mm) Part No. 1 25 50 Part No.

Fan Vibration Sleeve and Accessories Rubber Fan Sleeve, Panel Mount Hole 5.0 (mm) 43 40 40 Sq. Q313-ND 2.71 2.28 2.06 QLM-40-20-10 Rubber Fan Sleeve, Panel Mount Hole 5.5 (mm) 64 60 60 Sq. Q314-ND 3.24 2.73 2.47 QLM-60-30-10 1 Rubber Fan Sleeve, Panel Mount Hole 6.5 (mm) 84 80 80 Sq. Q315-ND 3.73 3.14 2.84 QLM-80-40-10 Rubber Fan Sleeve, Panel Mount Hole 6.5 (mm) 97 92 92 Sq. Q316-ND 3.62 3.28 2.93 QLM-92-40-10 Rubber Fan Sleeve, Panel Mount Hole 8.5 (mm) 125 119 119 Sq. Q317-ND 4.27 3.87 3.46 QLM-119-50-10

40 32 40 Sq. Q328-ND 1.37 1.15 1.04 QSB-40-01 60 50 60 Sq. Q329-ND 1.53 1.29 1.17 QSB-60-01 2 Filter Guard EMI/RFI Shield Sheet, Metal 80 71.5 80 Sq. Q330-ND 1.87 1.57 1.42 QSB-80-01 92 82.5 92 Sq. Q331-ND 2.20 1.85 1.68 QSB-92-01 119 105 119 Sq. Q332-ND 9.62 8.09 7.32 QSB-119-01

Fan Accessories

(Continued)

Fig. 1 Fig. 2 A

BA B

ThermaPro-V (TPV) DC FansThermal Speed Control: This option uses a thermistor to monitor the temperature and regulate the speed accordingly. The fan will automatically adjust its speed to optimize the airflow to the surrounding temperature. For conditions where power inputs are at a minimum, the fan operates at half speed, providing a minimal amount of CFM to those components still in need of cooling. This reduction in speed results in a significant reduction in noise and power consumption. As the power requirements in crease, so does the internal temperature. The fan senses this increase and com pen sates for it. The fan will continue to increase in speed until it reaches full speed for maximum cool ing. The temperature range is 25°C ~ 45°C. Any temperature below 25°C the fan will operate at half speed. Between 25°C and 45°C, the fan RPM changes linearly with temperature. Over 45°C, the fan will maintain full speed oper ation. Fans equipped with this option use a thermistor. The thermistor can be located on a zip cord and placed on hot spots such as processors, heatsinks, transformers, etc., or can be placed in the hub of the fan to monitor the air traveling through the fan.

SA

CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN MEXICO

MAJOR DC

24 VDC 1.0A

PAT. #3747578

JD2486XDN P/N032273

R

FUSE PROTECTED

Fig. 2Fig. 1

CO

M

AIR ROTRO

N

FLIGHTTM

60




MADE IN JAPAN

DC 12 V 14W 12 A

CO

M

AIR ROTRO

N

FLIGHTTM

60




MADE IN JAPAN

DC 12 V 14W 12 A

SA

CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN MEXICO

DIPLOMAT

24 VDC 1.0A

PAT. #3747578

JD2486XDN P/N032273

FUSE PROTECTED

CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN MEXICO

MAJOR DC

24 VDC 1.0A

PAT. #3747578


R

FUSE PROTECTED


CO

M

AIR ROTRO

N

SJEJD COMPANY

MADE IN USA

BISQUIT DC

24 VDC 1.0A

PAT. #3747578


FUSE PROTECTED

R

Fig. 4 Fig. 5

◆ RoHS Compliant

Dim. Voltage Power Running Connection Life Digi-Key Price Each Comair Finger Price Fig. Model mm Nom. Range Bearing (Watts) Current RPM CFM Type Expectancy Part No. 1 25 Model No. Guards Each

1 Muffin 120x32 12 6/14 Sleeve 2.8 230mA 1700 47 Lead Wires 83,000 hrs. @ 40°C CR269-ND◆ 36.50 30.12 MC12T3H CR210-ND◆ 1.67

Sprint 80x32 48 24/56 Sleeve 2.9 60mA 2100 20 Lead Wires 55,000 hrs. @ 40°C CR274-ND◆ 33.00 27.23 ST48T3H CR180-ND◆ .90

2 Patriot 127x51 48 24/56 Ball 10.0 210mA 1700 113 Terminal 62,000 hrs. @ 50°C CR277-ND 74.34 — PD48T2H CR206-ND◆ 2.75

Dimensions Voltage Connection Power Running Life Digi-Key Price Each Comair Finger Price Fig. Model mm Nom. Range Type Bearing (Watts) Current RPM CFM Expectancy Part No. 1 25 Model No. Guards Each

AC Fans 80x38 115 81/125 Terminal Ball 14 .20A 3000 29 50,000 hrs. @ 25°C CR406-ND◆ 11.79 10.16 GAA8038-115BB CR229-ND◆ .68

Gryphon 80x38 230 161/242 Terminal Ball 10 .08A 3000 29 50,000 hrs. @ 25°C CR407-ND◆ 12.15 10.47 GAA8038-230BB CR229-ND◆ .68

120x38 115 81/125 Terminal Ball 24 .30A 3000 111 50,000 hrs. @ 25°C CR408-ND◆ 11.25 9.69 GAA1238-115BB CR210-ND◆ 1.67 120x38 230 161/242 Terminal Ball 10 .20A 3000 111 50,000 hrs. @ 25°C CR409-ND◆ 11.79 10.16 GAA1238-230BB CR210-ND◆ 1.67

80x42 115 — Lead Wires Sleeve 7/6 .08/.07A 2200/2600 23/27 55,000 hrs. @ 40°C CR093-ND◆ 26.20 21.62 SU2E1 CR180-ND◆ .90 80x42 115 — Terminal Sleeve 13/11 .19/.15A 2750/3250 28/34 55,000 hrs. @ 40°C CR097-ND◆ 25.90 21.37 SU2A5 CR180-ND◆ .90 80x42 115 — Lead Wires Sleeve 13/11 .19/.15A 2750/3250 28/34 55,000 hrs. @ 40°C CR091-ND◆ 24.80 20.46 SU2A1 CR180-ND◆ .90 80x42 115 — Lead Wires Ball 13/11 .19/.15A 2750/3250 28/34 73,000 hrs. @ 40°C CR103-ND◆ 29.00 23.93 SU2B1 CR180-ND◆ .90 80x42 115 — Terminal Ball 13/11 .19/.15A 2750/3250 28/34 73,000 hrs. @ 40°C CR105-ND◆ 29.00 23.93 SU2B5 CR180-ND◆ .90

Sprite 80x42 115 — Lead Wires Sleeve 7/6 .07/.06A 1700/1950 15/18 55,000 hrs. @ 40°C CR108-ND* 26.80 22.11 SU2C7 CR180-ND◆ .90 80x42 — 220/230 Lead Wires Sleeve 14/13 .09/.08A 2750/3250 28/34 55,000 hrs. @ 40°C CR250-ND* 25.40 20.96 SU3A1 CR180-ND◆ .90 80x42 115 — Lead Wires Sleeve 7/6 .07/.06A 1750/1900 17/20 55,000 hrs. @ 40°C CR251-ND* 27.50 22.69 SU2C1 CR180-ND◆ .90 80x42 — 220/230 Terminal Sleeve 14/13 .09/.08A 2750/3250 28/34 55,000 hrs. @ 40°C CR252-ND* 26.40 21.78 SU3A5 CR180-ND◆ .90 80x42 115 — Terminal Sleeve 7/6 .07/.06A 1750/1900 17/20 55,000 hrs. @ 40°C CR253-ND* 26.70 22.03 SU2C5 CR180-ND◆ .90 80x42 — 220/230 Lead Wires Ball 14/13 .09/.08A 2750/3250 28/34 55,000 hrs. @ 40°C CR255-ND* 31.50 25.99 SU3B1 CR180-ND◆ .90

1 120x38 115 — Terminal Sleeve 7/7 .07/.06A 1640/1660 55/57 55,000 hrs. @ 40°C CR113-ND◆ 27.00 22.28 WR2A1 CR210-ND◆ 1.67

Whisper 120x38 115 — Terminal Sleeve 11/10 .12/.11A 2100/2400 70/80 55,000 hrs. @ 40°C CR114-ND 27.00 22.28 WR2H1 CR210-ND◆ 1.67 120x38 — 220/230 Terminal Sleeve 12/12 .07/.07A 1590/2000 53/62 55,000 hrs. @ 40°C CR116-ND◆ 29.50 24.34 WR3A1 CR210-ND◆ 1.67

119x39 115 — Terminal Sleeve 6/6 .07/.06A 1450/1500 48/50 55,000 hrs. @ 40°C CR117-ND† 27.40 22.61 WX2A1 CR210-ND◆ 1.67 119x39 115 — Terminal Sleeve 10/9 .11/.10A 1900/2000 65/70 55,000 hrs. @ 40°C CR119-ND† 27.40 22.61 WX2M1 CR210-ND◆ 1.67

Whisper XL 119x39 115 — Terminal Sleeve 15/13 .19/.15A 2200/2500 70/83 55,000 hrs. @ 40°C CR118-ND† 27.40 22.61 WX2H1 CR210-ND◆ 1.67

119x39 — 220/230 Terminal Sleeve 14/13 .10/.09A 2200/2500 70/83 55,000 hrs. @ 40°C CR256-ND† 27.40 22.61 WX3H1 CR210-ND◆ 1.67

120x38 115 — Terminal Sleeve 15/14 .19/.16A 2650/3100 88/105 55,000 hrs. @ 40°C CR122-ND◆ 24.30 20.05 MU2A1 CR210-ND◆ 1.67

Muffin 120x38 115 — Terminal Ball 15/14 .19/.16A 2650/3100 88/105 85,000 hrs. @ 40°C CR124-ND◆ 35.90 29.62 MU2B1 CR210-ND◆ 1.67

120x38 — 220/230 Terminal Sleeve 15/14 .10/.09A 2650/3100 88/105 55,000 hrs. @ 40°C CR123-ND◆ 24.30 20.05 MU3A1 CR210-ND◆ 1.67 120x38 — 220/230 Terminal Ball 15/14 .10/.09A 2650/3100 88/105 85,000 hrs. @ 40°C CR125-ND◆ 35.90 29.62 MU3B1 CR210-ND◆ 1.67

119x39 115 — Terminal Sleeve 17/15 .20/.18A 2700/3100 92/108 55,000 hrs. @ 40°C CR128-ND†* 27.50 22.69 MX2A1 CR210-ND◆ 1.67 119x39 115 — Terminal Ball 17/15 .20/.18A 2700/3100 92/108 83,000 hrs. @ 40°C CR132-ND†* 37.80 31.19 MX2B1 CR210-ND◆ 1.67 119x39 115 — Terminal Sleeve 17/15 .20/.18A 2700/3100 98/115 55,000 hrs. @ 40°C CR126-ND† 25.60 21.12 MX2A3 CR210-ND◆ 1.67

Muffin XL 119x39 115 — Terminal Ball 17/15 .20/.18A 2700/3100 98/115 83,000 hrs. @ 40°C CR130-ND† 37.80 31.19 MX2B3 CR210-ND◆ 1.67

119x39 — 220/230 Terminal Sleeve 17/16 .10/.09A 2700/3100 98/115 55,000 hrs. @ 40°C CR257-ND† 28.00 23.10 MX3A3 CR210-ND◆ 1.67 119x39 — 220/230 Terminal Ball 17/16 .10/.09A 2700/3100 98/115 55,000 hrs. @ 40°C CR258-ND† 37.80 31.19 MX3B3 CR210-ND◆ 1.67

2 Diplomat 133x91 — 220/230 Terminal Ball 26/30 .13/.20A 2850/3350 150/170 50,000 hrs. @ 40°C CR314-ND 66.15 56.97 DAF77B2 — —

172x55 115 — Terminal Ball 41.4 .36A 3400 300 40,000 hrs. @ 50°C CR309-ND† 72.90 62.78 FA2B3 CR196-ND◆ 2.93

3 Falcon 172x55 — 220/230 Terminal Ball 41.4 .18A 3400 300 40,000 hrs. @ 50°C CR310-ND† 72.90 62.78 FA77B3 CR196-ND◆ 2.93

172x150x55 115 — Terminal Ball 41.4 .36A 3400 300 40,000 hrs. @ 50°C CR311-ND† 72.90 62.78 MA2B3 CR196-ND◆ 2.93

4

Maltese 172x150x55 — 220/230 Terminal Ball 41.4 .18A 3400 300 40,000 hrs. @ 50°C CR312-ND† 72.90 62.78 MA77B3 CR196-ND◆ 2.93

172x150x51 115 — Terminal Ball 30/31 .27/.26A 2850/3350 200/235 5 yrs. @ 25°C CR134-ND† 60.90 50.25 MR2B3 CR196-ND◆ 2.93

Major 172x150x51 — 220/230 Terminal Ball 26/30 .13/.14A 2850/3350 200/235 5 yrs. @ 25°C CR135-ND† 61.20 50.49 MR77B3 CR196-ND◆ 2.93

3 Patriot

172x51 115 — Terminal Ball 30/31 .27/.26A 2850/3350 200/235 5 yrs. @ 25°C CR136-ND† 60.90 50.25 PT2B3 CR206-ND◆ 2.75 172x51 — 220/230 Terminal Ball 26/30 .13/.14A 2850/3350 200/235 53,000 hrs. @ 40°C CR137-ND† 61.20 50.49 PT77B3 CR206-ND◆ 2.75

176x112 115 — Terminal Ball 90/85 1.4/1.2A 2820/3350 280/340 25,000 hrs. @ 40°C CR140-ND◆ 102.58 84.63 TNE2A CR179-ND◆ 6.56 1

Tarzan 176x112 — 220/230 Terminal Ball 82/85 .65/.60A 2820/3350 280/340 25,000 hrs. @ 40°C CR141-ND◆ 102.58 84.63 TNE3A CR179-ND◆ 6.56

176x112 115 — Lead Wires Ball 90/85 1.4/1.2A 2820/3350 280/340 25,000 hrs. @ 40°C CR259-ND◆ 101.44 83.69 TNE2C CR179-ND◆ 6.56

254x89 115 — Lead Wires Ball 65 .48/.50A 1400/1650 455/550 54,000 hrs. @ 40°C CR144-ND† 63.53 55.36 CLE2L2 CR182-ND◆ 1.83 3 Caravel 254x89 115 — Terminal Ball 65 .48/.50A 1400/1650 455/550 54,000 hrs. @ 40°C CR145-ND† 65.45 57.04 CLE2T2 CR182-ND◆ 1.83 254x89 — 220/230 Terminal Ball 55 .24/.25A 1400/1650 455/550 54,000 hrs. @ 40°C CR147-ND† 65.45 57.04 CLE3T2 CR182-ND◆ 1.83

5

Biscuit 120x40 115 — Terminal Sleeve 17/16 .19/.17A 2500/2700 20/22 55,000 hrs. @ 40°C CR148-ND◆ 34.00 28.05 BT2A1 — — Blower 120x40 — 220/230 Terminal Sleeve 15/14 .09/.08A 2500/2700 20/22 55,000 hrs. @ 40°C CR149-ND◆ 34.00 28.05 BT3A1 — —


L

Fan Accessories (Cont.)

Dim. (mm) Fits Fan Digi-Key Price Each Qualtek Fig. Description A B Size (mm) Part No. 1 25 50 Part No.

Filters and Filter Accessories 13 Filter Guard Assembly (30 PPI) 39.88 32.00 40 Sq. CR286-ND 1.68 1.41 1.28 09150-F/30 13 Filter Guard Assembly (45 PPI) 39.88 32.00 40 Sq. CR287-ND 1.68 1.41 1.28 09150-F/45 — Replacement Filter Element (30 PPI) - Pkg. of 5 — — 40 Sq. CR324-ND 1.40 1.18 1.07 09150-M/30 — Replacement Filter Element (45 PPI) - Pkg. of 5 — — 40 Sq. CR325-ND 1.40 1.18 1.07 09150-M/45 13 Filter Guard Assembly (30 PPI) 59.94 50.04 60 Sq. CR283-ND 1.80 1.52 1.37 09250-F/30 13 Filter Guard Assembly (45 PPI) 59.94 50.04 60 Sq. CR284-ND 1.80 1.52 1.37 09250-F/45 — Replacement Filter Element (30 PPI) - Pkg. of 5 — — 60 Sq. CR326-ND 1.46 1.23 1.12 09250-M/30 — Replacement Filter Element (45 PPI) - Pkg. of 5 — — 60 Sq. CR327-ND 1.46 1.23 1.12 09250-M/45 14 Filter Guard Assembly (30 PPI) 83.57 71.37 80 Sq. CR212-ND 1.91 1.61 1.45 09325-F/30 14 Filter Guard Assembly (45 PPI) 83.57 71.37 80 Sq. CR214-ND 1.91 1.61 1.45 09325-F/45 — Replacement Filter Element (30 PPI) - Pkg. of 5 — — 80 Sq. CR213-ND 1.60 1.35 1.22 09325-M/30 — Replacement Filter Element (45 PPI) - Pkg. of 5 — — 80 Sq. CR215-ND 1.60 1.35 1.22 09325-M/45 14 Filter Guard Assembly (30 PPI) 96.52 82.55 92 Sq. CR328-ND 2.19 1.84 1.67 09362-F/30 14 Filter Guard Assembly (45 PPI) 96.52 82.55 92 Sq. CR329-ND 2.19 1.84 1.67 09362-F/45 — Replacement Filter Element (30 PPI) - Pkg. of 5 — — 92 Sq. CR330-ND 1.69 1.42 1.29 09362-M/30 — Replacement Filter Element (45 PPI) - Pkg. of 5 — — 92 Sq. CR331-ND 1.69 1.42 1.29 09362-M/45 14 Filter Guard Assembly (30 PPI) 123.7 104.9 CR216-ND 2.28 1.92 1.74 09450-F/30 14 Filter Guard Assembly (45 PPI) 123.7 104.9 119 & 120 CR218-ND 2.28 1.92 1.74 09450-F/45 — Replacement Filter Element (30 PPI) - Pkg. of 5 — — Square CR217-ND 1.35 1.14 1.03 09450-M/30 — Replacement Filter Element (45 PPI) - Pkg. of 5 — — CR219-ND 1.35 1.14 1.03 09450-M/45 Filter/Screen, Stainless Steel (Washable) 64.26 49.6 60 Sq. CR373-ND 6.12 5.55 4.96 06250-SS Filter/Screen, Aluminum (Washable) 83.82 71.37 80 Sq. CR233-ND 3.01 2.72 2.44 06325-M Filter/Screen, Stainless Steel (Washable) 83.82 71.37 80 Sq. CR374-ND 6.31 5.72 5.12 06325-SS Filter/Screen, Aluminum (Washable) 91.95 82.42 92 Sq. CR234-ND 3.36 3.05 2.73 06362-M 15 Filter/Screen, Stainless Steel (Washable) 91.95 82.42 92 Sq. CR375-ND 6.50 5.89 5.27 06362-SS Filter/Screen, Aluminum (Washable) 118.87 104.77 120 Sq. CR235-ND 3.72 3.37 3.02 06450-M Filter/Screen, Stainless Steel (Washable) 118.87 104.77 120 Sq. CR376-ND 9.73 8.81 7.88 06450-SS Filter/Screen, Anodized-Black (Washable) 83.82 71.37 80 Sq. Q343-ND 3.74 3.39 3.03 06325-B Filter/Screen, Anodized-Black (Washable) 118.5 104.77 120 Sq. Q344-ND 4.67 4.23 3.78 06450-B Finger Guard Assembly, Plastic (30 PPI) 176.0 161.5 150 Sq. CR183-ND 3.09 2.60 2.35 09650-F/30

17 Finger Guard Assembly, Plastic (45 PPI) 176.0 161.5 150 Sq. CR185-ND 3.09 2.60 2.35 09650-F/45

Finger Guard Assembly, Plastic (60 PPI) 176.0 161.5 150 Sq. CR186-ND 2.82 2.55 2.28 09650-F/60 Finger Guard Assembly, Plastic (100 PPI) 176.0 161.5 150 Sq. CR189-ND 2.82 2.55 2.28 09650-F/100

Plug Cord Sets – SPT-1 (18/2) Straight On Plug and Cord – 24” (60.96cm) Fits all Diplomat, Falcon, CR197-ND 1.33 1.12 1.01 07100-24 21A Straight On Plug and Cord – 36” (91.44cm) Maltese, Major, Patriot, CR198-ND 1.63 1.37 1.24 07100-36 Straight On Plug and Cord – 50” (127.00cm) Tarzan, Caravel, and CR199-ND 1.90 1.60 1.45 07100-50 Straight On Plug and Cord – 24” (60.96cm) Biscuit model fans CR361-ND 1.94 1.63 1.48 07100-SP024 21B Straight On Plug and Cord – 36” (91.44cm) with Terminal CR362-ND 2.21 1.86 1.68 07100-SP036 Straight On Plug and Cord – 72” (182.88cm) Connections CR363-ND 2.97 2.50 2.26 07100-SP072 22A

45° Angle Plug and Cord – 24” (60.96cm) Fits all AC Fans CR318-ND 1.33 1.12 1.01 07145-24 45° Angle Plug and Cord – 36” (91.44cm) with Terminal CR319-ND 1.63 1.37 1.24 07145-36

22B 45° Angle Plug and Cord – 36” (91.44cm) Connection CR365-ND 2.21 1.86 1.68 07145-SP036

45° Angle Plug and Cord – 72” (182.88cm) Type CR366-ND 2.97 2.50 2.26 07145-SP072 90° Angle Plug and Cord – 12” (30.48cm) Fits all CR320-ND 1.07 .91 .82 07190-12 23A 90° Angle Plug and Cord – 24” (60.96cm) AC Fans CR321-ND 1.33 1.12 1.01 07190-24 90° Angle Plug and Cord – 36” (91.44cm) with CR322-ND 1.63 1.37 1.24 07190-36 90° Angle Plug and Cord – 24” (60.96cm) Terminal CR367-ND 1.94 1.63 1.48 07190-SP024 23B 90° Angle Plug and Cord – 36” (91.44cm) Connection CR368-ND 2.21 1.86 1.68 07190-SP036 90° Angle Plug and Cord – 72” (182.88cm) Type CR369-ND 2.97 2.50 2.26 07190-SP072 90° Angle T-Style Plug and Cord – 12” (30.48cm) Fits CR323-ND 1.07 .91 .82 07199-12 90° Angle T-Style Plug and Cord – 24” (60.96cm) all CR170-ND 1.33 1.12 1.01 07199-24 24A 90° Angle T-Style Plug and Cord – 36” (91.44cm) AC Fans CR175-ND 1.63 1.37 1.24 07199-36 90° Angle T-Style Plug and Cord – 72” (182.88cm) with CR337-ND 1.61 1.36 1.23 07199-72 90° Angle T-Style Plug and Cord – 96” (243.84cm) Terminal CR338-ND 3.05 2.57 2.32 07199-96 24B

90° Angle T-Style Plug and Cord – 36” (91.44cm) Connection CR371-ND 2.21 1.86 1.68 07199-SP036 90° Angle T-Style Plug and Cord – 72” (182.88cm) Type CR372-ND 2.97 2.50 2.26 07199-SP072

Dim. (mm) Fits Fan Digi-Key Price Each Qualtek Fig. Description A B Size (mm) Part No. 1 25 50 Part No. 40 32 40 Sq. Q323-ND .34 .29 .26 QF-40-01 60 50 60 Sq. Q324-ND .40 .34 .31 QF-60-01 — Filter Media 80 71.5 80 Sq. Q325-ND .50 .42 .38 QF-80-01 92 82.5 92 Sq. Q326-ND .53 .45 .40 QF-92-01 119 105 119 Sq. Q327-ND .74 .63 .57 QF-119-01

3 Lamella Rivet — — — Q333-ND .26 .22 .20 QN-36-110

Dim. (mm) Fits Fan Center No. of Digi-Key Price Each Qualtek Fig. A B Thick Size (mm) Dim. (mm) Rings Material Part No. 1 25 50 Part No.

Finger Guards 46 32 7.5 40 Sq. 18 solid 2 Plastic Q318-ND 1.02 .86 .78 QSG-40-02 66 50 8.5 60 Sq. 27 solid 2 Plastic Q319-ND 1.27 1.07 .97 QSG-60-02 4 89 71.5 8.5 80 Sq. 30 solid 2 Plastic Q320-ND 1.39 1.17 1.06 QSG-80-02 101 82.5 8.5 92 Sq. 30 solid 3 Plastic Q321-ND 1.46 1.23 1.11 QSG-92-02 128 105 9.0 119 Sq. 42 solid 4 Plastic Q322-ND 2.01 1.69 1.53 QSG-119-02 109.47 104.78 4.83 120 Sq. 57 open 3 Metal CR178-ND 1.19 1.01 .91 08146 5 76.96 71.37 3.89 80 Sq. 50 open 3 Metal CR180-ND .90 .76 .69 08153 209.55 173.99 8.38 254 Dia. 102 open 5 Metal CR182-ND 1.83 1.66 1.49 08154 158.75 161.92 6.10 150 Dia. 74 solid 6 Metal CR206-ND 2.75 2.31 2.09 08152

6 158.75 161.92 6.10 171.5 Dia. 74 solid 5 3/4 Metal CR196-ND 2.93 2.46 2.23 08151-01

124.46 113.28 5.92 127 Dia. 14 open 9 Metal CR200-ND 2.43 2.05 1.85 08150

7 115.57 104.78 3.75 120 Dia. 14.2 open 8 Metal Q342-ND .95 .80 .72 08129

115.57 104.78 5.66 120 Dia. 14.2 open 8 Metal Q357-ND .95 .80 .72 08130 76.2 71.37 4.95 80 Dia. 14.2 open 5 Metal Q358-ND .79 .60 .54 08132 8 115.06 104.65 6.60 120 Sq. 25.4 solid 6 Plastic CR280-ND .77 .65 .59 09120-G 9 115.06 104.65 2.54 120 Sq. 32 solid 5 Plastic CR315-ND .79 .67 .61 09122-G 10 115.06 104.65 6.60 120 Sq. 45 solid 5 Plastic CR281-ND .90 .76 .69 09121-G 11 117.35 104.78 5.21 120 Sq. 33 solid 7 Metal CR210-ND 1.67 1.40 1.27 08141 82.42 89.41 4.95 92 Sq. 14 open 6 Metal CR220-ND .74 .63 .57 08174 50.04 53.10 4.95 60 Sq. 14 open 4 Metal CR221-ND .65 .55 .50 08147 173.99 222.25 6.35 254 Dia. 76.2 solid 9 Metal CR223-ND 3.85 3.24 2.93 08127

104.8 115.6 5.66 120 Dia. 17.5 open 8 Metal CR224-ND .88 .74 .67 08170

71.4 76.20 4.95 80 Dia. 17.4 open 5 Metal CR229-ND .68 .57 .52 08172

12 29.21 32.00 4.80 40 Dia. 15.875 open 2 Metal CR230-ND .63 .53 .48 08149

21.8 24.00 4.80 30 Sq. 9 open 2 Metal CR377-ND .59 .54 .48 08346 27.00 29.00 4.00 35 Sq. 14.2 open 2 Metal CR378-ND .63 .57 .51 08347 40.00 41.06 4.80 50 Sq. 14.2 open 3 Metal CR379-ND .83 .76 .68 08248 41.00 42.00 4.80 52 Sq. 14.2 open 3 Metal CR388-ND .57 .52 .46 08148 39.88 32.00 4.83 40 Sq. 12 open 3 Plastic CR285-ND .39 .33 .30 09150-G

13 59.94 50.04 6.35 60 Sq. 5 solid 3 Plastic CR225-ND .47 .40 .36 09250-G

80.01 71.37 6.35 80 Sq. 15 solid 3 Plastic CR226-ND .64 .54 .49 09325-G 79.76 71.37 3.05 80 Sq. 32 solid 3 Plastic CR282-ND .51 .44 .39 09080-G

14 91.95 82.55 6.35 92 Sq. 31.5 solid 4 Plastic CR227-ND .73 .62 .56 09362-G

118.11 104.65 7.11 120 Sq. 25 solid 6 Plastic CR228-ND .88 .74 .67 09450-G 16 24.2 34.2 3.0 25 Sq. 104 open 2 Metal CR181-ND .52 .44 .40 08245 18 60.0 50.0 7.0 60 Sq. 21.0 solid 3 Plastic CR190-ND .69 .58 .53 09252-G 19 151 172 7.0 151 Sq. 50 solid 8 Plastic CR191-ND 1.95 1.64 1.48 09651-G 20 162.05 154.43 6.45 150 Dia. 16.31 open 10 Metal Q341-ND 1.94 1.63 1.48 08126

AB

Ø4.57 (4 plcs.) Ø85.09 Ø4.06

Ø 32

BA

Ø118.36 Ø4.57

AB

Ø4.57

Ø31.7

5

AB

AB



Fig. 12Fig. 11

Fig. 16

Fig. 18

Fig. 19

Fig. 17

Fig. 20

Fig. 21

AB

AB B

A

Fig. 23

A B

Fig. 24

AB

AB

AB

3.1

A

B

BA

Ø 154

Ø 5

A

B

A

B

Fig. 22

Fig. 13

Fig. 14 Fig. 15

B

A

B

6.35

Ø1.57Wire

0.76 Thick steel plate

A Ø4.57

BA

A

B

Fig. 3

BA

Ø 6.0

11.5

Fig. 4


L

AC Axial FansNMB-MAT AC Axial Fans suit a wide range of applications. They force air out in a “funnel” type pattern, and are ideal when cooling a specific area such as a power supply that is surrounded by numerous components with minimum ventilation available.

Size Input Power Air Flow Digi-Key Price Each NMB Technologies Finger Price (mm) Bearing Voltage (W) (CFM) Noise (dB) Leads Part No. 1 5 10 Part No. Guard Each 60x30 Ball 115 4.0 9.18 29 22AWG, 300mm Leads P12871-ND 16.88 14.52 12.49 2412PS-12W-B30-A00 CR221-ND .65

80x25 Ball 115 5.0 19.77 33 22AWG, 300mm Leads P12872-ND 17.00 14.62 12.58 3110PS-12W-B30-A00 CR229-ND .68

115 4.0 18.0 31 .110 Terminal P12988-ND 16.50 14.19 12.21 3115FS-12T-B00-A00 CR229-ND .68 115 4.0 19.4 25 22AWG, 300mm Leads P12993-ND 17.00 14.62 12.58 3115PS-12W-B10-A00 CR229-ND .68 230 6.5 20.0 35 .110 Terminal P12875-ND 16.50 14.19 12.21 3115FS-23T-B10-A00 CR229-ND .68 230 6.5 20.0 35 22AWG, 300mm Leads P12879-ND 16.50 14.19 12.21 3115FS-23W-B10-A00 CR229-ND .68 115 6.0 22.0 36 .110 Terminal P12873-ND 17.00 14.62 12.58 3115FS-12T-B10-A00 CR229-ND .68 115 6.0 22.0 36 22AWG, 300mm Leads P12877-ND 16.50 14.19 12.21 3115FS-12W-B10-A00 CR229-ND .68 230 5.0 22.0 26 22AWG, 300mm Leads P12997-ND 17.00 14.62 12.58 3115PS-23W-B10-A00 CR229-ND .68 230 6.0 26.0 34 .110 Terminal P12995-ND 17.00 14.62 12.58 3115PS-23T-B20-A00 CR229-ND .68 230 6.0 26.0 34 22AWG, 300mm Leads P12998-ND 17.00 14.62 12.58 3115PS-23W-B20-A00 CR229-ND .68

80x38 Ball 115 7.0 27.0 40 .110 Terminal P12989-ND 16.50 14.19 12.21 3115FS-12T-B20-A00 CR229-ND .68

115 7.0 27.0 40 22AWG, 300mm Leads P12990-ND 16.50 14.19 12.21 3115FS-12W-B20-A00 CR229-ND .68 230 7.5 28.0 40 22AWG, 300mm Leads P12992-ND 16.50 14.19 12.21 3115FS-23W-B20-A00 CR229-ND .68 115 7.0 31.77 38 .110 Terminal P12881-ND 17.00 14.62 12.58 3115PS-12T-B30-A00 CR229-ND .68 115 8.5 32.0 44 .110 Terminal P12874-ND 17.00 14.62 12.58 3115FS-12T-B30-A00 CR229-ND .68 115 8.5 32.0 44 22AWG, 300mm Leads P12878-ND 17.00 14.62 12.58 3115FS-12W-B30-A00 CR229-ND .68 115 7.0 32.0 38 22AWG, 300mm Leads P12882-ND 17.00 14.62 12.58 3115PS-12W-B30-A00 CR229-ND .68 230 8.0 32.0 38 .110 Terminal P12996-ND 17.00 14.62 12.58 3115PS-23T-B30-A00 CR229-ND .68 230 8.0 32.0 38 22AWG, 300mm Leads P12999-ND 17.00 14.62 12.58 3115PS-23W-B30-A00 CR229-ND .68 230 8.0 33.0 44 .110 Terminal P12876-ND 16.50 14.19 12.21 3115FS-23T-B30-A00 CR229-ND .68 230 8.0 33.0 44 22AWG, 300mm Leads P12880-ND 17.00 14.62 12.58 3115FS-23W-B30-A00 CR229-ND .68

115 6.0 20.0 25 .110 Terminal P13100-ND 17.25 14.84 12.77 3610PS-12T-B10-A00 CR220-ND .74 115 6.0 20.0 25 22AWG, 300mm Leads P13102-ND 17.25 14.84 12.77 3610PS-12W-B10-A00 CR220-ND .74 230 6.0 20.0 26 .110 Terminal P13103-ND 17.25 14.84 12.77 3610PS-23T-B10-A00 CR220-ND .74 115 6.0 28.0 35 .110 Terminal P13101-ND 17.25 14.84 12.77 3610PS-12T-B20-A00 CR220-ND .74 92x25 Ball 230 6.0 28.0 35 .110 Terminal P13104-ND 17.25 14.84 12.77 3610PS-23T-B20-A00 CR220-ND .74 115 9.0 34.5 38 22AWG, 300mm Leads P12884-ND 17.25 14.84 12.77 3610PS-12W-B30-A00 CR220-ND .74 230 10.0 34.5 39 22AWG, 300mm Leads P12886-ND 17.25 14.84 12.77 3610PS-23W-B30-A00 CR220-ND .74 115 9.0 34.6 38 .110 Terminal P12883-ND 17.25 14.84 12.77 3610PS-12T-B30-A00 CR220-ND .74 230 10.0 34.6 39 .110 Terminal P12885-ND 17.25 14.84 12.77 3610PS-23T-B30-A00 CR220-ND .74

115 7.0 53.0 30 .110 Terminal P12887-ND 17.25 14.84 12.77 4710PS-12T-B20-A00 CR224-ND .88

119x25 Ball 230 8.0 53.0 30 .110 Terminal P12889-ND 17.25 14.84 12.77 4710PS-23T-B20-A00 CR224-ND .88

115 11.0 70.6 38 .110 Terminal P12888-ND 17.25 14.84 12.77 4710PS-12T-B30-A00 CR224-ND .88 230 11.0 70.6 38 .110 Terminal P12890-ND 17.25 14.84 12.77 4710PS-23T-B30-A00 CR224-ND .88

115 5.5 49.4 28 .110 Terminal P12891-ND 16.25 13.98 12.03 4715MS-12T-B10-A00 CR224-ND .88 230 7.5 67.0 30 .110 Terminal P13110-ND 16.25 13.98 12.03 4715MS-23T-B20-A00 CR224-ND .88 115 7.0 67.1 30 .110 Terminal P12892-ND 16.25 13.98 12.03 4715MS-12T-B20-A00 CR224-ND .88

115 10.0 70.0 33 .110 Terminal P12895-ND 16.88 14.52 12.49 4715FS-12T-B10-D00 CR224-ND .88

230 9.0 70.0 70 .110 Terminal P12897-ND 16.88 14.52 12.49 4715FS-23T-B10-D00 CR224-ND .88 115 9.8 80.0 36 .110 Terminal P13105-ND 16.88 14.52 12.49 4715FS-12T-B20-D00 CR224-ND .88 230 11.0 88.2 37 .110 Terminal P13111-ND 16.25 13.98 12.03 4715MS-23T-B30-A00 CR224-ND .88 119x38 Ball 115 14.5 102 41 .110 Terminal P12893-ND 16.25 13.98 12.03 4715MS-12T-B50-A00 CR224-ND .88 115 14.5 90.0 39 .110 Terminal P13106-ND 16.88 14.52 12.49 4715FS-12T-B30-D00 CR224-ND .88 115 13.0 95.0 39 .110 Terminal P13109-ND 16.25 13.98 12.03 4715MS-12T-B40-A00 CR224-ND .88 230 13.0 95.0 39 .110 Terminal P13112-ND 16.25 13.98 12.03 4715MS-23T-B40-A00 CR224-ND .88 115 14.0 100.0 42 .110 Terminal P13107-ND 16.25 13.98 12.03 4715FS-12T-B40-D00 CR224-ND .88 230 14.0 100.0 100 .110 Terminal P13108-ND 16.88 14.52 12.49 4715FS-23T-B40-D00 CR224-ND .88 230 14.0 102.4 41 .110 Terminal P12894-ND 16.25 13.98 12.03 4715MS-23T-B50-A00 CR224-ND .88 115 14.4 110 45 .110 Terminal P12896-ND 16.25 13.98 12.03 4715FS-12T-B50-D00 CR224-ND .88 230 14.0 110 110 .110 Terminal P12898-ND 16.25 13.98 12.03 4715FS-23T-B50-D00 CR224-ND .88

115 32.0 21.2 56 .110 Terminal P12899-ND 51.85 44.60 38.37 5915PC-12T-B30-A00 CR191-ND 1.95 150x172x38 Ball 230 35.0 21.2 56 .110 Terminal P12900-ND 51.85 44.60 38.37 5915PC-23T-B30-A00 CR191-ND 1.95 230 18.0 102.3 38 .110 Terminal P13113-ND 51.85 44.60 38.37 5915PC-23T-B10-A00 CR191-ND 1.95

FCC-000-ND Lead Wire Assembly, 3 Conductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1.80/1; $16.19/10 P11031-ND Lead Wire Assembly, 2 Conductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $.63/1; $13.44/25

◆ RoHS Compliant Manufacturer Part Number Ending Code: A - Standard; BX - 2 PPR Speed Sensor (TAC Output)

Please Note: Custom Fan Cable Assemblies available upon request.

DC Fans FBL SeriesFeatures: • Louvered design increases air flow and decreases turbulent

noise at standard rating conditions

• Hydro-Wave Bearing Technology

Specifications: • Operating Temperature: -10°C ~ 70°C (65%RH)

• Plastic Rating: All Panaflo fans are manufactured with a UL94V-0 plastic (flammability)

• Noise Data: The noise data is meas ured at 1 meter from the air intake side of the fan suspended in a semi-anechoic chamber (background noise 13dB-A maximum)

• Life Expectancy: 50,000 hours (40°C, 65%RH)

Operating Dim. Input Max. Air Max. Air Max. Lead NMB Voltage (VDC) (mm) Power Flow Pressure Noise Length Digi-Key Price Each Technologies Finger Price Nom. Range Sq.xThk. (W) (CFM) (mmH2O) (dB-A) (mm) Part No. 1 5 10 50 100 Part No. Guards Each

12 7-13.5 60 x 25.5 3.24 15.89 4.7 42.0 315 P10893-ND◆ 8.75 7.53 6.48 5.81 5.25 FBL06A12U1A CR221-ND◆ .65

12 7-13.8 60 x 25.5 2.64 14.83 4.1 36.0 315 P10892-ND◆ 8.50 7.31 6.29 5.65 5.10 FBL06A12H1A CR221-ND◆ .65

12 7-13.8 60 x 25.5 2.04 13.06 3.0 32.0 315 P10891-ND 8.50 7.31 6.29 5.65 5.10 FBL06A12M1A CR221-ND◆ .65

12 7-13.8 60 x 25.5 1.68 14.83 2.1 29.0 315 P10890-ND◆ 8.75 7.53 6.48 5.81 5.25 FBL06A12L1A CR221-ND◆ .65

24 14-27.6 60 x 25.5 3.24 15.89 4.7 42.0 315 P11017-ND 8.75 7.53 6.48 5.81 5.25 FBL06A24U1A CR221-ND◆ .65

24 14-27.6 60 x 25.5 1.68 14.83 2.1 29.0 315 P11014-ND◆ 8.50 7.31 6.29 5.65 5.10 FBL06A24L1A CR221-ND◆ .65

12 7-13.5 80 x 25.5 4.32 35.31 4.7 42.0 300 P11082-ND◆ 9.25 7.96 6.85 6.15 5.55 FBL08A12U1BX CR180-ND◆ .90

12 7-13.8 80 x 25.5 4.32 35.31 4.0 42.0 300 P10897-ND 8.75 7.53 6.48 5.81 5.25 FBL08A12U1A CR180-ND◆ .90

12 7-13.8 80 x 25.5 3.00 30.01 2.9 39.0 300 P10896-ND 8.50 7.31 6.29 5.65 5.10 FBL08A12H1A CR180-ND◆ .90

12 7-13.8 80 x 25.5 2.04 24.71 2.0 33.0 300 P10895-ND 8.75 7.53 6.48 5.81 5.25 FBL08A12M1A CR180-ND◆ .90

12 7-13.8 80 x 25.5 1.20 17.30 1.1 26.0 300 P10894-ND◆ 8.75 7.53 6.48 5.81 5.25 FBL08A12L1A CR180-ND◆ .90

24 14-27.6 80 x 25.5 3.00 30.00 2.9 39.0 300 P11020-ND◆ 8.50 7.31 6.29 5.65 5.10 FBL08A24H1A CR180-ND◆ .90

24 14-27.6 80 x 25.5 2.04 24.71 2.0 33.0 300 P11019-ND 8.50 7.31 6.29 5.65 5.10 FBL08A24M1A CR180-ND◆ .90

24 14-27.6 80 x 25.5 1.20 17.30 1.1 26.0 300 P11018-ND 8.50 7.31 6.29 5.65 5.10 FBL08A24L1A CR180-ND◆ .90

12 7-13.5 92 x 25.5 3.48 45.89 3.3 40.0 295 P10900-ND 8.50 7.31 6.29 5.65 5.10 FBL09A12H1A CR220-ND◆ .74

12 7-13.5 92 x 25.5 3.48 45.9 3.3 40.0 295 P11083-ND 9.25 7.96 6.85 6.15 5.55 FBL09A12H1BX CR220-ND◆ .74

12 7-13.8 92 x 25.5 2.40 35.30 2.3 36.0 295 P10899-ND 8.50 7.31 6.29 5.65 5.10 FBL09A12M1A CR220-ND◆ .74

24 14-27.6 92 x 25.5 6.60 54.70 4.4 47.0 295 P11025-ND 8.50 7.31 6.29 5.65 5.10 FBL09A24U1A CR220-ND◆ .74

24 14-27.6 92 x 25.5 6.60 54.70 4.4 47.0 295 P11092-ND 9.25 7.96 6.85 6.15 5.55 FBL09A24U1BX CR220-ND◆ .74

24 14-27.6 92 x 25.5 3.48 45.89 3.3 40.0 295 P11024-ND 8.50 7.31 6.29 5.65 5.10 FBL09A24H1A CR220-ND◆ .74

24 14-27.6 92 x 25.5 2.40 35.30 2.3 36.0 295 P11023-ND 8.50 7.31 6.29 5.65 5.10 FBL09A24M1A CR220-ND◆ .74

12 7-13.8 120 x 38 7.20 81.19 5.2 46.0 280 P10904-ND 28.25 24.30 20.91 18.76 16.95 FBL12G12H1A CR210-ND◆ 1.67

24 14-27.6 120 x 38 7.20 81.19 5.2 46.0 280 P11028-ND 28.25 24.30 20.91 18.76 16.95 FBL12G24H1A CR210-ND◆ 1.67

24 14-27.6 120 x 38 5.40 67.07 3.6 41.0 280 P11027-ND 28.25 24.30 20.91 18.76 16.95 FBL12G24M1A CR210-ND◆ 1.67

24 14-27.6 120 x 38 2.88 52.95 2.3 35.0 280 P11026-ND 28.25 24.30 20.91 18.76 16.95 FBL12G24L1A CR210-ND◆ 1.67


L

DC Axial FansNMB-MAT combines the Panasonic Panaflo and NMB fan product lines.NMB-MAT offers a comprehensive line of cooling products, including AC and DC axial fans and blowers ranging from 25mm to 172mm in diameter. NMB-MAT leverages its expertise to develop and produce superior cooling fans and blowers.

Specifications: • Operating Temperature: -10°C ~ 60/70°C by model (65%RH)

Features: • Aerodynamic blade and venturi design • They are ideal when cooling a specific area that is surrounded by numerous components with minimum ventilation available.

Please Note: Custom Fan Cable Assemblies available upon request.

(Continued)

Operating Input Max. Air Max. Air Max. Lead Dimensions Voltage (VDC) Power Flow Pressure Noise Length Mount Digi-Key Price Each NMB Technologies Finger Price (mm) Nom. Range (W) (CFM) (In H2O) (dB-A) (mm) Bearing Sensors Type Part No. 1 5 10 Part No. Guards Each

5 4.5 ~ 5.5 0.625 2.0 .20 25.0 200 Ball — Rib P12806-ND◆ 13.58 11.68 10.05 1004KL-01W-B50-B00 CR181-ND◆ .52

25x10 12 8 ~ 13.8 0.72 2.0 .20 25.0 200 Ball — Rib P12807-ND◆ 13.58 11.68 10.05 1004KL-04W-B50-B00 CR181-ND◆ .52

12 8 ~ 13.8 0.72 2.0 .20 25.0 200 Ball Lock Rotor Rib P13383-ND◆ 14.20 12.22 10.51 1004KL-04W-B59-B00 CR181-ND◆ .52


5 4.5 ~ 5.5 0.90 3.8 .216 27.0 200 Ball Lock Rotor Rib P13384-ND◆ 14.75 12.69 10.92 1204KL-01W-B59-B00 CR377-ND◆ .59

30x10

12 6 ~ 13.8 0.96 3.8 .216 27.0 200 Ball — Rib P12809-ND◆ 14.13 12.15 10.46 1204KL-04W-B50-B00 CR377-ND◆ .59



5 4.5 ~ 5.5 1.05 5.6 .16 27.0 200 Ball Tac Rib P13386-ND◆ 14.38 12.37 10.64 1404KL-01W-B59-B50 CR378-ND◆ .63

35x10

12 8 ~ 13.8 0.96 5.6 .16 27.0 200 Ball — Rib P12811-ND◆ 14.13 12.15 10.46 1404KL-04W-B50-B00 CR378-ND◆ .63




40x10



5 4.5 ~ 5.5 0.600 6.0 .145 28.0 200 Ball — Rib P12814-ND◆ 11.83 10.17 8.76 1606KL-01W-B30-L00 CR230-ND◆ .63


5 4.5 ~ 5.5 1.20 8.1 .252 34.0 200 Ball Lock Rotor Rib P13390-ND◆ 12.45 10.71 9.22 1606KL-01W-B59-L00 CR230-ND◆ .63

40x15 12 10.2 ~ 13.8 0.804 6.0 .145 28.0 200 Ball — Rib P12816-ND◆ 11.83 10.17 8.76 1606KL-04W-B30-L00 CR230-ND◆ .63









5 4.5 ~ 6.0 1.40 6.7 .256 33.0 300 Ball — Rib P9701-ND◆ 15.00 12.90 11.10 FBK04F05H CR230-ND◆ .63




40x20 12 10.2 ~ 13.8 0.84 7.4 .17 25.5 200 Ball — Rib P13580-ND◆ 11.83 10.17 8.76 1608KL-04W-B30-L00 CR230-ND◆ .63











50x10



52x15

12 10.2 ~ 13.0 1.56 14.1 .14 30.0 200 Ball — Rib P12826-ND ◆ 11.38 9.79 8.42 2106KL-04W-B50-L00 CR388-ND◆ .57






60x15




24 14 ~ 27.6 1.99 16.6 .187 32.0 325 Hydrowave — Rib P9727-ND◆ 10.00 8.60 7.40 FBA06T24H CR221-ND◆ .65

12 6.0 ~ 13.8 0.60 10.9 .07 22.5 300 Ball — Rib P12830-ND◆ 11.25 9.68 8.33 2408NL-04W-B10-L00 CR221-ND◆ .65


60x20

12 6.0 ~ 13.8 1.32 17.6 .16 31.5 300 Ball Lock Rotor Rib P13400-ND◆ 11.88 10.22 8.79 2408NL-04W-B59-L00 CR221-ND◆ .65

12 6.0 ~ 13.8 1.32 17.6 .16 31.5 300 Ball Lock Rotor Flange P13402-ND◆ 11.88 10.22 8.79 2408NL-04W-B59-P00 CR221-ND◆ .65



12 6.0 ~ 13.8 0.90 13.7 .08 23.0 300 Ball — Rib P12833-ND◆ 10.83 9.31 8.02 2410ML-04W-B10-B00 CR221-ND◆ .65


12 6.0 ~ 13.8 1.80 24.0 .20 33.5 300 Ball Lock Rotor Rib P13403-ND◆ 8.08 6.95 5.98 2410RL-04W-B59-C00 CR221-ND◆ .65


60x25 12 6.0 ~ 13.2 6.20 37.0 .57 46.0 300 Ball Tac Flange P13406-ND◆ 12.70 10.93 9.40 2410ML-04W-B89-E50 CR221-ND◆ .65



24 10.0 ~ 26.4 8.16 34.59 .482 50.0 300 Ball Tac Flange P13407-ND◆ 11.50 9.89 8.51 2410ML-05W-B89-E50 CR221-ND◆ .65

24 10.0 ~ 26.4 8.16 34.59 .482 50.0 300 Ball — Flange P13483-ND◆ 12.08 10.39 8.94 2410ML-05W-B80-E00 CR221-ND◆ .65

Rib Mount Type:

Flange Mount Type:

◆ RoHS Compliant


L

DC Axial Fans (Cont.)

Operating Input Max. Air Max. Air Max. Lead Dimensions Voltage (VDC) Power Flow Pressure Noise Length Mount Digi-Key Price Each NMB Technologies Finger Price (mm) Nom. Range (W) (CFM) (In H2O) (dB-A) (mm) Bearing Sensors Type Part No. 1 5 10 Part No. Guards Each 12 7 ~ 13.8 2.52 20.5 .236 37.0 315 Hydrowave — Flange P9758-ND◆ 8.25 7.10 6.11 FBA06A12U1A CR221-ND◆ .65

12 7 ~ 13.8 2.52 20.5 .236 37.0 315 Hydrowave Lock Rotor Flange P9995-ND◆ 8.50 7.31 6.29 FBA06A12U1BS CR221-ND◆ .65

12 7 ~ 13.8 2.04 19.1 .20 32.0 315 Hydrowave — Flange P9729-ND◆ 8.25 7.10 6.11 FBA06A12H1A CR221-ND◆ .65

12 7 ~ 13.8 2.04 19.1 .20 32.0 315 Hydrowave Tac Flange P11033-ND◆ 8.75 7.53 6.48 FBA06A12H1BX CR221-ND◆ .65

60x25.5

12 7 ~ 13.8 1.56 16.6 .15 28.0 315 Hydrowave — Flange P9767-ND◆ 8.25 7.10 6.11 FBA06A12M1A CR221-ND◆ .65

12 7 ~ 13.8 1.32 14.1 .12 24.0 315 Hydrowave — Flange P9728-ND◆ 8.25 7.10 6.11 FBA06A12L1A CR221-ND◆ .65

12 7 ~ 13.8 1.32 14.1 .12 24.0 315 Hydrowave Tac Flange P11034-ND◆ 8.75 7.53 6.48 FBA06A12L1BX CR221-ND◆ .65







80x15 12 6.0 ~ 13.0 2.76 32.8 .12 34.0 300 Ball Lock Rotor Rib P13570-ND◆ 12.70 10.93 9.40 3106KL-04W-B59-B00 CR180-ND◆ .90




12 6.0 ~ 13.8 1.08 26.5 .08 26.0 300 Ball — Flange P12836-ND◆ 11.55 9.94 8.55 3108NL-04W-B10-P00 CR180-ND◆ .90



80x20



24 15.0 ~ 27.6 3.60 44.0 .20 42.0 300 Ball Lock Rotor Flange P13409-ND◆ 12.18 10.47 9.01 3108NL-05W-B59-P00 CR180-ND◆ .90

12 6.0 ~ 13.8 1.20 24.7 .07 22.0 300 Ball — Flange P12840-ND◆ 11.13 9.57 8.24 3110KL-04W-B10-P00 CR180-ND◆ .90

12 6.0 ~ 13.8 1.20 24.7 .07 22.0 300 Ball — Flange P13485-ND◆ 11.55 9.94 8.55 3110KL-04W-B10-D00 CR180-ND◆ .90



80x25 12 6.0 ~ 13.0 3.12 40.2 .16 35.0 300 Ball Lock Rotor Flange P13488-ND◆ 12.18 10.47 9.01 3110KL-04W-B69-D00 CR180-ND◆ .90



24 10.0 ~ 26.4 3.36 40.2 .16 35.0 300 Ball Lock Rotor Flange P13491-ND◆ 12.18 10.47 9.01 3110KL-05W-B69-D00 CR180-ND◆ .90


12 7 ~ 13.8 3.24 46.9 .189 38.2 300 Hydrowave — Flange P9759-ND◆ 8.25 7.10 6.11 FBA08A12U1A CR180-ND◆ .90

12 7 ~ 13.8 3.24 46.9 .189 38.2 300 Hydrowave Lock Rotor Flange P9997-ND◆ 8.50 7.31 6.29 FBA08A12U1BS CR180-ND◆ .90


12 7 ~ 13.8 2.08 39.6 .148 32.0 300 Hydrowave — Rib P11035-ND◆ 8.00 6.88 5.92 FBA08A12H1AZ CR180-ND◆ .90

12 7 ~ 13.8 2.08 39.6 .148 32.0 300 Hydrowave Lock Rotor Flange P11036-ND◆ 8.50 7.31 6.29 FBA08A12H1BS CR180-ND◆ .90


80x25.5

12 7 ~ 13.8 1.49 32.1 .098 28.0 300 Hydrowave Lock Rotor Flange P11038-ND◆ 8.50 7.31 6.29 FBA08A12M1BS CR180-ND◆ .90

12 7 ~ 13.8 1.49 32.1 .098 28.0 300 Hydrowave Tac Flange P11039-ND◆ 8.75 7.53 6.48 FBA08A12M1BX CR180-ND◆ .90


12 7 ~ 13.8 0.82 24.0 .061 21.0 300 Hydrowave — Rib P11037-ND◆ 8.25 7.10 6.11 FBA08A12L1AZ CR180-ND◆ .90


24 14 ~ 27.6 2.52 39.6 .148 32.0 300 Hydrowave Tac Flange P11097-ND◆ 11.50 10.07 8.63 FBA08A24H1CX CR180-ND◆ .90



12 6.0 ~ 13.8 3.00 46.9 .22 37.0 300 Ball — Flange P12845-ND◆ 12.33 10.60 9.13 3112KL-04W-B40-E00 CR180-ND◆ .90

80x32

12 6.0 ~ 12.6 5.40 58.6 .32 44.0 300 Ball Lock Rotor Flange P13412-ND◆ 12.95 11.14 9.59 3112KL-04W-B69-E00 CR180-ND◆ .90

24 10.0 ~ 27.6 3.36 46.9 .22 37.0 300 Ball — Flange P12846-ND◆ 12.33 10.60 9.13 3112KL-05W-B40-E00 CR180-ND◆ .90

24 10.0 ~ 25.2 5.04 58.6 .32 44.0 300 Ball Lock Rotor Flange P13413-ND◆ 12.95 11.14 9.59 3112KL-05W-B69-E00 CR180-ND◆ .90



92x25

12 6.0 ~ 13.8 2.64 47.6 .15 37.5 300 Ball Lock Rotor Rib P13414-ND◆ 13.38 11.51 9.90 3610KL-04W-B49-G00 CR220-ND◆ .74

24 10.0 ~ 25.0 3.84 54.7 .19 41.0 300 Ball — Rib P12848-ND◆ 12.75 10.97 9.44 3610KL-05W-B50-D00 CR220-ND◆ .74

12 7 ~ 13.8 5.16 68.8 .197 43.0 295 Hydrowave — Flange P9760-ND ◆ 8.25 7.10 6.11 FBA09A12U1A CR220-ND◆ .74

12 7 ~ 13.8 5.16 68.8 .197 43.0 295 Hydrowave Lock Rotor Rib P11044-ND◆ 8.50 7.31 6.29 FBA09A12U1BO CR220-ND◆ .74

12 7 ~ 13.8 5.16 68.8 .197 43.0 295 Hydrowave Tac Flange P9975-ND ◆ 8.75 7.53 6.48 FBA09A12U1BX CR220-ND◆ .74


12 7 ~ 13.8 2.70 56.8 .148 35.0 295 Hydrowave — Flange P11040-ND◆ 8.25 7.10 6.11 FBA09A12H1AZ CR220-ND◆ .74

12 7 ~ 13.8 2.70 56.8 .148 35.0 295 Hydrowave Lock Rotor Rib P11041-ND◆ 8.50 7.31 6.29 FBA09A12H1BO CR220-ND◆ .74

12 7 ~ 13.8 2.70 56.8 .16 35.0 295 Hydrowave Tac Flange P13481-ND 9.00 7.74 6.66 FBA09A12H1BQ CR220-ND◆ .74


92x25.5



12 7 ~ 13.8 1.32 42.7 .09 27.0 295 Hydrowave Tac Flange P11043-ND◆ 8.75 7.53 6.48 FBA09A12L1BX CR220-ND◆ .74

24 12 ~ 27.6 7.2 68.8 .181 47.0 295 Hydrowave Tac Flange P11096-ND◆ 8.75 7.53 6.48 FBA09A24U1BX CR220-ND◆ .74


24 14 ~ 27.6 3.36 56.8 .148 35.0 295 Hydrowave — Rib P11045-ND◆ 8.25 7.10 6.11 FBA09A24H1AZ CR220-ND◆ .74

24 14 ~ 27.6 3.36 56.8 .148 35.0 295 Hydrowave Lock Rotor Flange P11046-ND◆ 8.50 7.31 6.29 FBA09A24H1BS CR220-ND◆ .74





12 7.0 ~ 12.6 5.52 76.2 .36 46.5 300 Ball Lock Rotor Flange P13416-ND◆ 21.48 18.47 15.90 3615KL-04W-B59-P00 CR220-ND◆ .74

92x38


24 12.0 ~ 25.2 5.76 76.2 .36 46.5 300 Ball Lock Rotor Flange P13417-ND◆ 21.48 18.47 15.90 3615KL-05W-B59-P00 CR220-ND◆ .74

12 6.0 ~ 13.8 1.44 63.5 .07 27.0 300 Ball — Rib P13418-ND◆ 15.90 13.68 11.77 4710KL-04W-B10-E00 CR210-ND◆ 1.67

12 6.0 ~ 13.0 6.60 114.7 .20 41.5 300 Ball Lock Rotor Flange P13420-ND◆ 16.53 14.22 12.23 4710KL-04W-B59-E00 CR210-ND◆ 1.67

119x25

12 6.0 ~ 13.0 6.60 114.7 .20 41.5 300 Ball — Flange P13448-ND◆ 15.90 13.68 11.77 4710KL-04W-B50-E00 CR210-ND◆ 1.67

24 10.0 ~ 27.6 1.92 63.5 .07 27.0 300 Ball — Flange P13449-ND◆ 15.90 13.68 11.77 4710KL-05W-B10-E00 CR210-ND◆ 1.67

24 10.0 ~ 26.0 6.96 114.7 .20 41.5 300 Ball — Flange P13447-ND◆ 15.90 13.68 11.77 4710KL-05W-B50E00 CR210-ND◆ 1.67

24 10.0 ~ 26.0 6.96 114.7 .20 41.5 300 Ball Lock Rotor Flange P13419-ND◆ 16.53 14.22 12.23 4710KL-05W-B59-E00 CR210-ND◆ 1.67

12 6.0 ~ 13.8 1.92 56.1 .09 29.0 300 Ball — Flange P12854-ND◆ 22.00 18.92 16.28 4712KL-04W-B10-P00 CR210-ND◆ 1.67


119x32 12 6.0 ~ 13.8 8.28 112.0 .33 47.0 300 Ball Lock Rotor Flange P13421-ND◆ 22.63 19.46 16.75 4712KL-04W-B59-P00 CR210-ND◆ 1.67

24 12.0 ~ 27.6 8.16 112.0 .33 47.0 300 Ball Lock Rotor Flange P13422-ND◆ 22.63 19.46 16.75 4712KL-05W-B49-P00 CR210-ND◆ 1.67


(Continued)◆ RoHS Compliant


L

Model Dimensions (mm)

Type A B C D E F G H I

FAL-6F 65.8 28.1 55.7 111.4 60.7 107.1 76 99 97

FAL-5F 50 28 37 76 41 76 47 68 68

FAL-3F 33.2 20 26.8 50 26.8 50 29.6 43 43

BM5115 32 15 27 51 20 51 — 43 —

BM5125 32 25 27 51 20 51 — 43 —

BM6015 — 15 32 60 30 60 — 23 —

BG0702 — 25 39.9 75.7 39.9 75.7 — 67.1 —

BG0703 — 30 39.9 75.7 39.9 75.7 — 67.1 —

BG0903 — 33 58 93.5 53 97 — 71 —

BG1203 — 32 55 120 61 120 — 105 90

NMB-MAT DC Blowers are most suitable for cooling in high back pressure applications. Since the fan impeller is housed inside a rugged plastic enclosure, the blower is not affected by high back pressure caused by objects in close proximity to the exhaust port.

Specifications: • Operating Temperature: -10°C ~ 60°C • Storage Temperature: -40°C ~ 75°C • Blowers with Hydro-Wave and Ball Bearing Technology

Ø A

Direction ofRotation

B

C

F

D

I

G H

E

A

F

C

HD

B

E

Fig. 1

Fig. 2

DC Blowers

Operating Input Air Static Voltage (VDC) Current Power Flow Pressure Digi-Key Price Each NMB Technologies Fig. Nom. Range (mA) (W) CFM In H2O Noise Part No. 1 5 10 Part No. 12 7~13.8 500 6.00 22.97 0.71 45 P9754-ND◆ 30.00 25.80 22.20 FAL6F12LH

1 12 7~13.8 280 3.36 18.73 0.44 40 P9755-ND◆ 30.00 25.80 22.20 FAL6F12LL

24 14~27.6 295 7.08 23.7 0.78 45 P9763-ND◆ 30.00 25.80 22.20 FAL6F24LH 24 14~27.6 155 3.72 18.7 0.45 40 P9764-ND 30.00 25.80 22.20 FAL6F24LL

12 7~13.8 210 2.52 10.60 0.41 35 P9756-ND◆ 27.50 23.65 20.35 FAL5F12LH

1 12 7~13.8 145 1.74 8.83 0.24 29 P9757-ND◆ 27.50 23.65 20.35 FAL5F12LL

24 14~27.6 150 3.50 9.18 0.28 40 P9765-ND 27.50 23.65 20.35 FAL5F24LH 24 14~27.6 100 2.40 7.06 0.16 37.5 P9766-ND◆ 27.50 23.65 20.35 FAL5F24LL

5 4.5~6 320 1.60 3.17 0.24 34 P9772-ND◆ 21.25 18.28 15.73 FAL3F05LL 5 4.5~6 570 2.85 4.24 0.39 40 P9773-ND◆ 21.25 18.28 15.73 FAL3F05LH 1 12 7~13.8 170 2.04 3.17 0.24 34 P9774-ND◆ 21.25 18.28 15.73 FAL3F12LL 12 7~13.8 270 3.24 4.24 0.39 40 P9775-ND◆ 21.25 18.28 15.73 FAL3F12LH 24 14~27.6 150 3.60 4.24 0.39 40 P9776-ND◆ 21.25 18.28 15.73 FAL3F24LH

2 12 10.2~13.8 120 1.44 3.5 0.48 35 P12901-ND◆ 12.75 10.97 9.44 BM5115-04W-B40-L00

12 10.2~13.8 180 2.16 3.5 .80 42 P13437-ND‡ 13.38 11.51 9.90 BM5115-04W-B59-L00

12 10.2~13.8 130 1.56 5.3 .34 34 P12902-ND◆ 12.75 10.97 9.44 BM5125-04W-B40-L00 2 12 10.2~13.8 240 2.88 6.7 .64 41 P12903-ND◆ 12.75 10.97 9.44 BM5125-04W-B50-L00 12 10.2~13.8 240 2.88 6.7 .64 41 P13438-ND‡ 13.38 11.51 9.90 BM5125-04W-B59-L00

2 12 9~12.6 220 2.64 4.2 .68 42 P13439-ND‡ 13.65 11.74 10.11 BM6015-04W-B59-L00

12 6~13.8 190 2.28 8.47 .50 41 P13484-ND◆ 14.50 12.47 10.73 BG0702-B04-400-0

2 12 6~13.8 190 2.28 8.47 .50 41 P12904-ND◆ 14.38 12.37 10.64 BG0702-B04-400-0T0

12 6~13.8 250 3.00 9.5 .61 43 P13440-ND‡ 15.13 13.01 11.20 BG0702-B04-500-L00 24 10~27.6 140 3.36 9.50 .61 43 P12905-ND◆ 14.50 12.47 10.73 BG0702-B05-500-0

12 6~13.0 290 3.48 10.6 .44 38.5 P12906-ND◆ 14.50 12.47 10.73 BG0703-B04-400-0 2 12 6~13.0 290 3.48 10.6 .44 38.5 P13441-ND‡ 15.13 13.01 11.20 BG0703-B04-400-L00 24 10~26.0 150 3.60 10.6 .44 38.5 P12907-ND◆ 14.50 12.47 10.73 BG0703-B054-00-00

12 8~12.8 1030 12.40 28.6 1.4 54.5 P12908-ND◆ 20.38 17.53 15.08 BG0903-B04-400-0

2 12 10.8~12.6 1600 19.2 38.1 1.9 — P13442-ND† 21.00 18.06 15.54 BG0903-B04-700-S00

24 10~25.0 490 11.80 28.6 1.4 54.5 P12909-ND◆ 20.38 17.53 15.08 BG0903-B05-400-0 24 10~25 490 11.8 28.6 1.4 54.5 P13443-ND‡ 21.00 18.06 15.54 BG0903-B05-400-L00

12 6~13.8 650 7.80 28.2 .70 52 P12910-ND◆ 22.25 19.14 16.47 BG1203-B04-400-0

1 12 6~13.8 650 7.8 28.2 .70 52 P13444-ND‡ 22.88 19.68 16.93 BG1203-B04-400-L00

12 6~13.8 930 11.16 33.2 1.04 55 P13445-ND† 22.88 19.68 16.93 BG1203-B04-500-S00 24 12~25.2 480 11.52 33.2 1.04 55 P12911-ND◆ 22.25 19.14 16.47 BG1203-B05-500-0

◆ RoHS Compliant ‡ Locked Rotor Sensor † Tac Sensor

‡ Ball Bearings

C6

10

A

3B

25

80 ± 10

DC Fans UDQ SeriesSPECIFICATIONS:• Operating Temperature: 0°C ~ 70°C • Operating Humidity: <85 Rh% • Operating Voltgage (VDC): Nom: 5, Range: 3.1 ~ 5.5 • Life Expectancy (Hrs @ 60°C): 30,000

Note: Not for New Design

Dimensions Current Speed Max Air Flow Max Air Pressure Noise NMB (mm) @ 60°C @ 60°C @ 60°C @ 60°C @ 1M Digi-Key Price Each Technologies A B C (mA) (r/min) (m3/min.) (CFM) (Pa) (in H2O) dBA Part No. 1 5 10 50 100 Part No.

25 25 10 40 7,800 0.040 1.41 24 0.10 17 P11093-ND 13.75 11.83 10.18 9.13 8.25 UDQFBFM01CP1

30 30 10 90 8,500 0.10 3.60 35 0.14 26 P11085-ND‡ 20.00 17.20 14.80 13.28 12.00 UDQFHBB01-P1

30 30 10 50 6,000 0.065 2.29 17 0.07 18 P11094-ND 13.75 11.83 10.18 9.13 8.25 UDQFHFM01P1

DC Axial Fans (Cont.)

◆ RoHS Compliant

Operating Input Max. Air Max. Air Max. Lead Dimensions Voltage (VDC) Power Flow Pressure Noise Length Mount Digi-Key Price Each NMB Technologies Finger Price (mm) Nom. Range (W) (CFM) (In H2O) (dB-A) (mm) Bearing Sensors Type Part No. 1 5 10 Part No. Guards Each 12 6.0 ~ 13.8 6.60 108.0 .27 42.5 300 Ball — Flange P12857-ND◆ 19.40 16.69 14.36 4715KL-04W-B30-P00 CR210-ND◆ 1.67


12 8.0 ~ 13.2 17.50 162.0 .69 56.5 300 Ball — Flange P12862-ND◆ 53.48 45.99 39.58 4715SL-04W-B50-D00 CR210-ND◆ 1.67


12 8.0 ~ 12.9 23.0 181.0 .85 59.5 300 Ball Lock Rotor Flange P13427-ND◆ 54.10 46.53 40.04 4715SL-04W-B69-D00 CR210-ND◆ 1.67

119x38



24 15.0 ~ 27.6 17.80 162.0 .69 56.5 300 Ball — Flange P12863-ND◆ 53.48 45.99 39.58 4715SL-05W-B50-D00 CR210-ND◆ 1.67




48 30.0 ~ 50.4 39.84 201.0 1.04 62.3 300 Ball Lock Rotor Flange P13430-ND◆ 66.13 56.87 48.94 4715SL-07W-B79-D00 CR210-ND◆ 1.67

12 7 ~ 13.8 7.80 114.7 .315 45.5 280 Hydrowave — Flange P9761-ND◆ 18.13 15.59 13.42 FBA12G12U1A CR210-ND◆ 1.67

12 7 ~ 13.8 5.52 103.8 .267 41.5 280 Hydrowave — Flange P9750-ND◆ 18.13 15.59 13.42 FBA12G12H1A CR210-ND◆ 1.67

12 7 ~ 13.8 5.52 103.8 .267 41.5 280 Hydrowave — Rib P11048-ND◆ 18.13 15.59 13.42 FBA12G12H1AZ CR210-ND◆ 1.67

12 7 ~ 13.8 5.52 103.8 .267 41.5 280 Hydrowave Tac Flange P11050-ND 18.63 16.02 13.79 FBA12G12H1BX CR210-ND◆ 1.67

12 7 ~ 13.8 4.08 86.5 .189 35.5 280 Hydrowave — Flange P9749-ND◆ 18.13 15.59 13.42 FBA12G12M1A CR210-ND◆ 1.67

120x38 12 7 ~ 13.8 2.16 68.9 .130 30.0 280 Hydrowave — Flange P9748-ND◆ 18.13 15.59 13.42 FBA12G12L1A CR210-ND◆ 1.67

24 14 ~ 27.6 5.52 103.8 .267 41.5 280 Hydrowave — Flange P9753-ND◆ 17.88 15.38 13.23 FBA12G24H1A CR210-ND◆ 1.67

24 14 ~ 27.6 5.52 103.8 .267 41.5 280 Hydrowave Tac Flange P11080-ND◆ 18.63 16.02 13.79 FBA12G24H1BX CR210-ND◆ 1.67

24 14 ~ 27.6 3.84 86.5 .189 35.5 280 Hydrowave — Flange P9752-ND◆ 17.88 15.38 13.23 FBA12G24M1A CR210-ND◆ 1.67

24 14 ~ 27.6 4.80 103.8 .26 41.5 280 Hydrowave — Flange P13480-ND◆ 17.88 15.38 13.23 FBA12G24U1A CR210-ND◆ 1.67

24 14 ~ 27.6 2.64 68.9 .130 30.0 280 Hydrowave — Flange P9751-ND◆ 17.88 15.38 13.23 FBA12G24L1A CR210-ND◆ 1.67

12 6.0 ~ 18.0 24.7 250 .65 62.5 400 Ball — Rib P12864-ND◆ 76.63 65.90 56.71 5910PL-04W-B50-L00 CR191-ND◆ 1.95

150x172x25

24 12.0 ~ 30.0 24.0 250.0 .65 62.5 400 Ball — Rib P12865-ND◆ 76.63 65.90 56.71 5910PL-05W-B50-L00 CR191-ND◆ 1.95

24 12.0 ~ 30.0 24.0 250.0 .65 62.5 400 Ball Tac Rib P13431-ND◆ 77.25 66.44 57.17 5910PL-05W-B59-L50 CR191-ND◆ 1.95

48 25.0 ~ 60.0 35.5 290.0 .89 65.4 400 Ball Lock Rotor Rib P13432-ND◆ 77.25 66.44 57.17 5910PL-07W-B79-L00 CR191-ND◆ 1.95

12 6.0 ~ 18.0 17.28 240 .62 58.0 300 Ball — Flange P12866-ND◆ 73.75 63.43 54.58 5920PL-04W-B40-D00 CR191-ND◆ 1.95

12 6.0 ~ 18.0 17.28 240.0 .62 58.0 300 Ball Tac Flange P13433-ND◆ 74.38 63.97 55.04 5920PL-04W-B49-D50 CR191-ND◆ 1.95

150x172x50





172x50 24 12.0 ~ 30.0 15.84 240 .62 58.0 300 Ball — Flange P12869-ND◆ 73.75 63.43 54.58 6820PL-05W-B40-D00 CR196-ND◆ 2.93



L

Thin Cooling FansSpecifications: • Motor: Patented brushless DC motor design • Fan Housing: Injection molded non-

flammable black ther mo plastic UL94V-0 rating • Impeller: Injection molded non-flammable

black thermoplastic UL94V-0 rating Bearing: • Precision, life-lubricated ball bearing system;

Pre cision, oil-impreg nated sintered sleeve bearing sys tem. • Insulation: Class E integral

ground system rated @ 100°C • Insu lation Resistance: More than 500MΩ between internal

stator and lead wire (+) measured by DC 500V • Dielectric Strength: 500VAC for one

minute • Oper ating Temperature: -10°C ~ 70°C for ball and sleeve bearing version; 0°C ~

70°C for vapo bearing ver sion • Storage Temperature: -40°C ~ 70°C • Operating Voltage:

Rated voltage ±15% • Life Expectancy: 30,000 hours

◆ RoHS Compliant Please Note: Custom Fan Cable Assemblies available upon request (Continued)

Dim. Operating Air Static Pressure Noise (mm) Voltage Voltage Bearing Current Input Speed Flow (@ 1” or Pressure Digi-Key Price Each Sunon A x B (VDC) (VDC) Type (A) (W) (RPM) (CFM) 25.4mm – H20) (dBA) Sensor Part No. 1 10 25 50 Part No.

Fig. 1 — Hi-Performance Dual Axial Fans 40 x 48 12 5 ~ 13.8 Ball

1.40 16.8 14500/9500 27 1.97 61 — 259-1301-ND 30.60 23.55 22.05 20.74 PMD1204PJB1-A

40 x 56

12

5 ~ 13.8 Ball 1.40 16.8 14500/9500 26.5 1.73 59 — 259-1303-ND 31.75 24.43 22.88 21.52 PMD1204PPB1-A(2) 6 ~ 13.8 Ball 1.4 16.8 14500 26.5 1.73 59 — 259-1369-ND◆ 32.29 26.96 25.25 23.75 PMD1204PPB1-A(2).GN

Fig. 2 — Plastic Ultra-Thin Brushless Axial DC Fans — RoHS Compliant 17 x 8

5 3 ~ 6 Vapo 0.11 0.60 15000 0.70 0.17 16 — 259-1333-ND 15.23 12.72 11.91 11.20 GM0517PDV2-8.GN

20 x 8 5 3 ~ 6 Vapo 0.17 0.90 15000 1.60 0.22 23 — 259-1319-ND 14.38 12.01 11.25 10.58 GM0501PDV1-8.GN

3 ~ 6 Vapo 0.11 0.60 12000 1.30 0.15 21 — 259-1320-ND 14.38 12.01 11.25 10.58 GM0501PDV2-8.GN

25 x 6

5 3 ~ 6 Vapo 0.11 0.60 13000 3.00 0.22 31 — 259-1322-ND 10.39 8.68 8.13 7.64 GM0502PEV1-8N.GN

3 ~ 6 Vapo 0.08 0.40 10000 2.20 0.16 23 — 259-1323-ND 10.39 8.68 8.13 7.64 GM0502PEV2-8N.GN

3 ~ 6 Vapo 0.13 0.70 9500 4.9 0.14 28 — 259-1327-ND 11.42 9.54 8.93 8.40 GM0503PEV1-8 N.GN

30 x 6 5 3 ~ 6 Vapo 0.08 0.40 7500 3.7 0.09 24 — 259-1328-ND 11.42 9.54 8.93 8.40 GM0503PEV2-8 N.GN

3 ~ 6 Vapo 0.09 0.50 7000 5.9 0.10 32 — 259-1331-ND 12.83 10.72 10.04 9.44 GM0504PEV1-8.GN

40 x 6 5 3 ~ 6 Vapo 0.07 0.40 6000 5.5 0.08 26 — 259-1332-ND 12.83 10.72 10.04 9.44 GM0504PEV2-8.GN

Fig. 2 — Plastic Thin Brushless Axial DC Fans 20 x 10 5 3 ~ 6 Vapo 0.18 0.9 14000 1.5 0.20 20 — 259-1321-ND◆ 12.88 10.76 10.07 9.47 GM0501PFV2-8 N.GN

3 ~ 6 Vapo 0.12 0.6 13000 3.5 0.25 23 Tac 259-1324-ND◆ 11.44 9.56 8.95 8.42 GM0502PFV1-8.F.GN 5 3 ~ 6 Vapo 0.12 0.6 13000 3.5 0.25 23 — 259-1325-ND◆ 11.42 9.54 8.93 8.40 GM0502PFV1-8.GN 25 x 10 3 ~ 6 Vapo 0.08 0.4 10000 3.0 0.18 16 — 259-1326-ND◆ 11.42 9.54 8.93 8.40 GM0502PFV2-8.GN

4.5 ~ 13.8 Vapo 0.067 0.8 13000 3.5 0.25 23 — 259-1394-ND◆ 11.42 9.54 8.93 8.40 GM1202PFV1-8.GN

12 4.5 ~ 13.8 Vapo 0.038 0.5 10000 3.0 0.18 16 — 259-1395-ND◆ 11.42 9.54 8.93 8.40 GM1202PFV2-8 .GN

5 3 ~ 6 Vapo 0.14 0.7 9500 5.5 0.15 23 — 259-1329-ND◆ 11.42 9.54 8.93 8.40 GM0503PFV1-8.GN

30 x 10 3 ~ 6 Vapo 0.10 0.5 8000 4.6 0.12 20 — 259-1330-ND◆ 11.42 9.54 8.93 8.40 GM0503PFV2-8.GN

12

4.5 ~ 13.8 Vapo 0.078 1.0 9500 5.5 0.15 23 — 259-1396-ND◆ 11.42 9.54 8.93 8.40 GM1203PFV1-8.GN 4.5 ~ 13.8 Vapo 0.042 0.5 8000 4.6 0.12 20 — 259-1397-ND◆ 11.42 9.54 8.93 8.40 GM1203PFV2-8.GN

3 ~ 6 Vapo 0.15 0.8 9500 7.0 0.18 28 — 259-1334-ND◆ 11.42 9.54 8.93 8.40 GM0535PFV1-8.GN

35 x 10

5 3 ~ 6 Vapo 0.10 0.5 7500 6.5 0.12 22 — 259-1305-ND◆ 13.90 10.88 10.18 9.56 GM0535PFV2-8.GN

4.5 ~ 13.8 Vapo 0.08 1.0 9500 7.0 0.18 28 — 259-1391-ND◆ 12.83 10.72 10.04 9.44 GM1235PFV1-8.GN

12 4.5 ~ 13.8 Vapo 0.043 0.5 7500 6.5 0.12 22 — 259-1392-ND◆ 12.83 10.72 10.04 9.44 GM1235PFV2-8.GN

38 x 20 12 12 Ball 0.26 3.1 13000 12 0.61 44 — 259-1400-ND◆ 12.29 10.27 9.61 9.04 PMD1238PKB1-A (2).GN

38 x 28 12 12 Ball .30 3.6 13000 16.5 0.91 47 — 259-1401-ND◆ 15.51 12.95 12.13 11.41 PMD1238PQB1-A (2).GN

4 ~ 6 Vapo 0.24 1.2 7000 8.0 0.19 32 Tac 259-1341-ND◆ 5.71 4.77 4.47 4.20 KDE0504PFV1.11.MS.AF.GN 5 4 ~ 6 Vapo 0.24 1.2 7000 8.0 0.19 32 — 259-1342-ND◆ 5.12 4.28 4.01 3.77 KDE0504PFV1.11.MS.A.GN 4 ~ 6 Vapo 0.14 0.7 5800 7.0 0.13 27 — 259-1343-ND◆ 4.28 3.58 3.35 3.15 KDE0504PFV2 11.MS.A.GN

4.5 ~ 13.8 Vapo 0.15 1.8 8500 9.5 0.25 39 — 259-1352-ND◆ 4.84 4.05 3.79 3.56 KDE1204PFVX.11.MS.A.GN

40 x 10 4.5 ~ 13.8 Vapo 0.09 1.1 7000 8.0 0.19 32 Tac 259-1349-ND◆ 5.45 4.56 4.27 4.01 KDE1204PFV1.11.MS.AF.GN

12 4.5 ~ 13.8 Vapo 0.09 1.1 7000 8.0 0.19 32 — 259-1350-ND◆ 4.84 4.05 3.79 3.56 KDE1204PFV1 11.MS.A.GN 6 ~ 13.8 Vapo 0.08 1.0 5800 7.0 0.13 27 — 259-1351-ND◆ 4.84 4.05 3.79 3.56 KDE1204PFV2.11.MS.A.GN 4.5 ~ 13.8 Vapo 50 0.6 5500 4.9 0.10 20 — 259-1398-ND◆ 4.61 3.85 3.61 3.39 KDE1204PFV3 11.MS.B981.A.GN

40 x 20 12 4.5 ~ 13.8 Vapo 0.05 0.6 6200 7.7 0.16 21 — 259-1353-ND◆ 6.20 5.18 4.86 4.57 KDE1204PKV2 MS.A.GN

40 x 24 12

12 Ball 0.78 9.4 14500 23.5 1.26 55.0 — 259-1402-ND◆ 16.78 14.01 13.12 12.34 PMD1204PBB1-A (2).GN 6 ~ 13.8 Ball 0.72 8.6 15000 24 1.34 55.5 Tac 259-1370-ND◆ 16.45 13.74 12.87 12.10 PMD1204PQB1-A(2).U.F.GN

40 x 28 12

6 ~ 13.8 Ball 0.72 8.6 15000 24 1.34 55.5 — 259-1371-ND◆ 15.39 12.86 12.04 11.32 PMD1204PQB1-A(2).U.GN 6 ~ 13.8 Ball 0.57 6.8 13000 23.5 1.15 51.5 Tac 259-1372-ND◆ 21.90 18.29 17.13 16.11 PMD1204PQBX-A(2).F.GN

3.5 ~ 6 Ball 0.21 1.0 7000 9.5 0.16 32 — 259-1287-ND 8.61 6.17 5.87 5.46 KD0545PFB1 OC 5 4 ~ 6 Vapo 0.25 1.3 6000 11 0.17 32 — 259-1347-ND◆ 5.36 4.48 4.19 3.94 KDE0545PFV1.11.MS.A.GN 4 ~ 6 Vapo 0.15 0.8 5000 9.2 0.12 27 — 259-1348-ND◆ 5.36 4.48 4.19 3.94 KDE0545PFV2.11.MS.A.GN

45 x 10

4.5 ~ 13.8 Vapo 0.16 1.9 7100 12.5 0.22 35 — 259-1362-ND◆ 4.84 4.05 3.79 3.56 KDE1245PFVX 11.MS.A.GN 12 4.5 ~ 13.8 Vapo 0.10 1.2 6000 11 0.17 32 — 259-1360-ND◆ 4.84 4.05 3.79 3.56 KDE1245PFV1 11.MS.A.GN 4.5 ~ 13.8 Vapo 0.08 1.0 5000 9.2 0.12 27 — 259-1361-ND◆ 4.84 4.05 3.79 3.56 KDE1245PFV2.11.MS.A.GN

5

4 ~ 6 Vapo 0.27 1.4 5200 13 0.14 30 — 259-1344-ND◆ 5.36 4.48 4.19 3.94 KDE0505PFV1.11.MS.A.GN 4 ~ 6 Vapo 0.16 0.8 4300 11 0.11 26 — 259-1345-ND◆ 6.11 5.11 4.78 4.50 KDE0505PFV2.11.MS.A.GN

50 x 10 4.5 ~ 13.8 Vapo 0.17 2.0 6100 15.2 0.18 35 — 259-1356-ND◆ 5.57 4.65 4.36 4.10 KDE1205PFVX 11.MS.A.GN 12 4.5 ~ 13.8 Vapo 0.11 1.3 5200 13 0.14 30 — 259-1354-ND◆ 6.11 5.11 4.78 4.50 KDE1205PFV1 11.MS.A.GN 6 ~ 13.8 Vapo 0.09 1.1 4300 11 0.11 26 — 259-1355-ND◆ 5.57 4.65 4.36 4.10 KDE1205PFV2 11.MS.A.GN

5 3.5 ~ 6 Vapo 0.15 0.8 4700 13 0.17 29 — 259-1346-ND◆ 6.11 5.11 4.78 4.50 KDE0505PHV2.MS.A.GN

50 x 15 12

6 ~ 13.8 Vapo 0.07 0.8 4700 13 0.17 29 — 259-1357-ND◆ 5.05 4.22 3.96 3.72 KDE1205PHV2 MS.A.GN 8 ~ 13.8 Vapo 0.044 0.5 3000 2.3 0.16 27 — 259-1393-ND◆ 9.07 7.58 7.10 6.68 GB1205PHV3-8AY.GN

52 x 15 5 4 ~ 6 Ball 0.38 1.9 5300 12.7 0.16 27.8 — 259-1161-ND 9.39 6.93 6.59 6.14 KDE0505PHB2

60 x 15 12

6 ~ 13.8 Ball 0.154 1.9 4300 21 0.18 37 Tac 259-1336-ND◆ 10.08 8.42 7.89 7.42 KD1206PHB1 (2).F.GN 6 ~ 13.8 Ball 0.154 1.9 4300 21 0.18 37 — 259-1337-ND◆ 9.92 8.28 7.76 7.30 KD1206PHB1 (2).GN

60 x 20

12 12 Ball 0.22 2.6 5000 27.5 0.28 39 — 259-1403-ND◆ 15.84 13.23 12.39 11.65 PMD1206PKB1-A (2).GN 24 24 Ball 0.12 2.9 5000 27.5 0.28 39 — 259-1404-ND◆ 15.04 12.56 11.76 11.06 PMD2406PKB1-A (2).GN

4.5 ~ 13.8 Vapo 0.14 1.7 4500 23.5 0.21 33.5 — 259-1358-ND◆ 6.77 5.66 5.30 4.98 KDE1206PTV1 MS.A.GN

12 5 ~ 13.8 Ball 0.12 1.4 4500 23.5 0.24 33 Tac 259-1338-ND◆ 8.88 7.42 6.95 6.54 KD1206PTB1 13(2).F.GN

60 x 25 5 ~ 13.8 Ball 0.12 1.4 4500 23.5 0.24 33 — 259-1339-ND◆ 7.83 6.54 6.12 5.76 KD1206PTB1.13.(2).GN

12 Ball 0.32 3.8 6900 36 0.54 44 — 259-1405-ND◆ 15.37 12.84 12.02 11.31 PMD1206PTB1-A (2).U.GN

24 24 Ball 0.158 3.8 6900 36 0.54 44 — 259-1407-ND◆ 16.12 13.46 12.61 11.86 PMD2406PTB1-A (2).U.GN 48 48 Ball 0.09 4.3 6900 36 0.54 44 — 259-1406-ND◆ 16.12 13.46 12.61 11.86 PMD4806PTB1-A (2).U.GN

12 6 ~ 13.8 Ball 0.88 10.6 8000 56.5 0.92 56 — 259-1373-ND◆ 18.49 15.45 14.47 13.60 PMD1206PMB1-A(2).GN 60 x 38 24 24 Ball 0.43 10.3 8000 56.5 0.92 56 — 259-1408-ND◆ 22.42 18.72 17.53 16.49 PMD2406PMB1-A (2).GN 48 48 Ball 0.24 11.5 8000 56.5 0.92 56 — 259-1409-ND◆ 23.36 19.51 18.27 17.18 PMD4806PMB1-A (2).GN

12 12 Ball 0.37 4.4 5100 49 0.36 45 — 259-1410-ND◆ 14.57 12.17 11.40 10.72 PMD1207PTB1-A (2).GN 70 x 25 24 24 Ball 0.19 4.6 5100 49 0.36 45 — 259-1411-ND◆ 15.98 13.35 12.50 11.76 PMD2407PTB1-A (2).GN 48 48 Ball 0.12 5.8 5100 49 0.36 45 — 259-1412-ND◆ 18.33 15.31 14.34 13.48 PMD4807PTB1-A (2).GN

5 ~ 13.8 Ball 0.24 2.9 3300 35 0.17 39.5 — 259-1442-ND◆ 8.49 6.54 6.12 5.76 KD1208PHB1 13(2).GN

80 x 15

12 5 ~ 13.8 Ball 0.24 2.9 3300 35 0.17 39.5 Tac 259-1443-ND◆ 10.15 7.81 7.32 6.88 KD1208PHB1 13.(2).F.GN

80 x 20

12 12 Ball 0.39 4.7 4600 53 0.36 49 — 259-1413-ND◆ 14.38 12.01 11.25 10.58 PMD1208PKB1-A (2).GN 24 24 Ball 0.21 5.0 4600 53 0.36 49 — 259-1414-ND◆ 15.51 12.95 12.13 11.41 PMD2408PKB1-A (2).GN

12 12 Ball 0.40 4.8 4700 60 0.43 47 — 259-1415-ND◆ 14.10 11.78 11.03 10.37 PMD1208PTB1-A (2).GN

80 x 25

24

24 Ball 0.21 5.0 4700 60 0.43 47 — 259-1416-ND◆ 15.65 13.07 12.24 11.51 PMD2408PTB1-A (2).GN 8 ~ 27.6 Ball 0.065 1.6 3100 41 0.19 35 — 259-1340-ND◆ 8.32 6.95 6.51 6.12 KD2408PTB1 13(2).GN


A

A

BFig. 1 Fig. 2

A

A

B


L

Thin Cooling Fans (Cont.)

◆ RoHS Compliant Please Note: Custom Fan Cable Assemblies available upon request

AC Axial FansThe best choice for industrial equipment and home appliance. SUNON Axial AC Fans are equipped with a shaded-pole motor, die-cast aluminum frame, and UL94V-0 rated injection molded non-flammable thermoplastic impeller, and is the most reliable AC Fan in the field. SUNON AC Fans are available in both life-lubricated ball bearing systems and oil-impregnated sintered sleeve bearing systems to meet the diverse needs of the market.

Features: • Frame: Die cast aluminum • Insulation: Class B integral ground system rated at 120°C • Insulation Resistance: 500 Megohms, minimum at 500VDC • Operating Temperature: -10° ~ 70°C

Applications: Game Machines, Copy Machines, Medical Equipment, Vending Machines, Packing Equipment, Air Conditioners, Heaters, Manufacturing Equipment and Electric Products.

Connection Bearing Rated Power Current Speed Air Flow Dimensions Weight Digi-Key Price Each Sunon Fig. Type Type Voltage (W) (A) (RPM) (CFM) (mm) (g) Part No. 1 10 25 Part No.

Lead Wires Vapo 115 3.6/3.6 0.191/0.185 4100/4200 17.5/18 60 x 25 81 259-1429-ND◆◊ 21.29 17.78 16.65 MA1062-HVL.GN

Lead Wires Vapo 220 ~ 240 4.1/4.4 0.198/0.211 4100/4200 17.5/18 60 x 25 81 259-1430-ND◆◊ 21.29 17.78 16.65 MA2062-HVL.GN

Lead Wires Vapo 115 3.7/3.7 0.208/0.197 3800/3900 28/29 70 x 25 90 259-1431-ND◆◊ 21.76 18.17 17.02 MA1072-HVL.GN

Lead Wires Vapo 220 ~ 240 4.3/4.4 0.207/0.220 3800/3900 28/29 70 x 25 90 259-1432-ND◆◊ 21.76 18.17 17.02 MA2072-HVL.GN

Lead Wires Ball 220 ~ 240 18/16 0.09/0.08 2400/2850 24/31 80 x 38 340 259-1383-ND◆ 16.36 13.66 12.79 SF23080A-2083HBL.GN

Lead Wires Sleeve 220 ~ 240 18/16 0.09/0.08 2300/2750 23/30 80 x 38 340 259-1384-ND◆ 13.25 11.07 10.37 SF23080A-2083HSL.GN

Lead Wires Ball 115 14/12 0.15/0.13 2400/2850 24/31 80 x 38 340 259-1379-ND◆ 16.36 13.66 12.79 SF11580A-1083HBL.GN

Lead Wires Sleeve 115 14/12 0.15/0.13 2300/2750 23/30 80 x 38 340 259-1380-ND◆ 13.25 11.07 10.37 SF11580A-1083HSL.GN

Lead Wires Ball 115 13/12 0.12/0.11 2350/2850 30/37 92 x 25 280 259-1381-ND◆ 16.36 13.66 12.79 SF11592A-1092HBL.GN

1 Lead Wires Sleeve 115 13/12 0.12/0.11 2250/2750 29/36 92 x 25 280 259-1382-ND◆ 13.11 10.95 10.26 SF11592A-1092HSL.GN

Terminal Ball 115 22/20 0.23/0.24 2850/3150 97/117 120 x 38 550 259-1385-ND◆ 15.89 13.27 12.43 SP100A-1123XBT.GN

Terminal Sleeve 115 22/20 0.26/0.24 2700/3100 95/115 120 x 38 550 259-1386-ND◆ 12.50 10.44 9.78 SP100A-1123XST.GN

Terminal Ball 115 20/18 0.21/0.18 2750/3050 87/107 120 x 38 550 259-1387-ND◆ 15.89 13.27 12.43 SP101A-1123HBT.GN

Terminal Sleeve 115 20/18 0.21/0.18 2550/2900 85/105 120 x 38 550 259-1388-ND◆ 12.50 10.44 9.78 SP101A-1123HST.GN

Terminal Ball 115 11/11 0.13/0.11 2150/2300 72/78 120 x 38 550 259-1389-ND◆ 15.89 13.27 12.43 SP103A-1123LBT.GN

Terminal Sleeve 115 11/11 0.13/0.11 2000/2200 70/76 120 x 38 550 259-1390-ND◆ 11.37 9.50 8.90 SP103A-1123LST.GN

Terminal Ball 220 ~ 240 22/21 0.14/0.12 2850/3150 97/117 120 x 38 550 259-1433-ND◆ 15.89 13.27 12.43 DP200A 2123XBT.GN

Terminal Ball 220 ~ 240 20/19 0.125/0.11 2750/3050 87/107 120 x 38 550 259-1434-ND◆ 15.89 13.27 12.43 DP201A 2123HBT.GN

Terminal Ball 220 ~ 240 16/15 0.09/0.08 2400/2600 78/84 120 x 38 550 259-1435-ND◆ 15.89 13.27 12.43 DP202A 2123MBT.GN

Terminal Ball 220 ~ 240 10/10 0.06/0.05 2150/2300 72/78 120 x 38 550 259-1436-ND◆ 15.89 13.27 12.43 DP203A 2123LBT.GN

Lead Wires Ball 220 ~ 240 39/36 0.28/0.24 2650/2950 180/200 171 x 151 x 51 957 259-1310-ND◆ 47.89 39.99 37.45 A2175-HBL-TC.GN

Terminal Ball 220 ~ 240 39/36 0.28/0.24 2650/2950 180/200 171 x 151 x 51 957 259-1311-ND◆ 47.89 39.99 37.45 A2175-HBT-TC.GN

2 Lead Wires Ball 220 ~ 240 39/36 0.28/0.24 2650/2950 180/200 171 x 151 x 51 957 259-1107-ND◆ 37.46 35.01 32.78 A2175-HBL-TC

Lead Wires Ball 115 39/36 0.59/0.48 2650/2950 180/200 171 x 151 x 51 957 259-1306-ND◆ 47.89 39.99 37.45 A1175-HBL TC.GN

Terminal Ball 115 39/36 0.59/0.48 2650/2950 180/200 171 x 151 x 51 957 259-1307-ND◆ 47.89 39.99 37.45 A1175-HBT-TC.GN

Terminal Ball 220 ~ 240 56/61 0.24/0.27 1900/2100 585/650 254 x 89 2300 259-1279-ND 103.22 79.43 74.38 A2259-HBT-TC

Terminal Ball 220 ~ 240 56/61 0.24/0.27 1900/2100 585/650 254 x 89 2300 259-1312-ND◆ 104.15 86.97 81.44 A2259-HBT-TC.GN

Lead Wires Ball 220 ~ 240 56/61 0.24/0.27 1900/2100 585/650 254 x 89 2300 259-1313-ND◆ 104.15 86.97 81.44 A2259-HBL-TC.GN

3 Terminal Ball 220 ~ 240 63/72 0.15/0.13 1400/1650 425/500 254 x 89 2300 259-1112-ND 103.22 79.43 74.38 A2259-MBT-TC

Terminal Ball 220 ~ 240 63/72 0.15/0.13 1400/1600 425/500 254 x 89 2300 259-1314-ND◆ 104.15 86.97 81.44 A2259-MBT TC.GN

Lead Wires Ball 220 ~ 240 63/72 0.15/0.13 1400/1650 425/500 254 x 89 2300 259-1111-ND 103.22 79.43 74.38 A2259-MBL (TC)

Lead Wires Ball 115 20/23 0.23/0.23 1400/1600 425/500 254 x 89 2300 259-1308-ND◆ 104.15 86.97 81.44 A1259-MBL TC.GN

Fig. 3Fig. 2Fig. 1

TM

MADE IN CHINA

SP101A

P/N 1123HBT115V~50/60Hz 0.21A

IMPEDANCE PROTECTED

MADE IN TAIWAN

TM

A2259-MBT TC

220/240~50/60Hz 0.15/0.13ATHERMAL PROTECTED

MADE IN TAIWAN

MADE IN TAIWAN

TM

A2175-HBT TC

220/240~50/60Hz 0.12/0.15ATHERMAL PROTECTED

MADE IN TAIWAN

◆ RoHS Compliant ◊ PBT Plastic Frame Please Note: Custom Fan Cable Assemblies available upon request

Chip CoolerDesigned for the Intel 6700PXH 64-bit PCI Hub Chip SetDimensions: 38 x 38 x 8mm

Operating Air Static Pressure Noise Voltage Voltage Bearing Current Input Speed Flow (@ 1” or Pressure Digi-Key Price Each Sunon (VDC) (VDC) Type (A) (W) (RPM) (CFM) 25.4mm – H20) (dBA) Part No. 1 10 25 50 Part No. 12 4.5 ~ 13.8 Ball .095 1.1 8800 6 0.16 32 259-1399-ND 18.54 14.27 13.36 12.57 GC123506BH-8DA.05.N.B515.GN

Dim. Operating Air Static Pressure Noise (mm) Voltage Voltage Bearing Current Input Speed Flow (@ 1” or Pressure Digi-Key Price Each Sunon A x B (VDC) (VDC) Type (A) (W) (RPM) (CFM) 25.4mm – H20) (dBA) Sensor Part No. 1 10 25 50 Part No. 12 6 ~ 13.8 Ball 0.76 9.1 5700 84.1 0.74 55.2 — 259-1374-ND◆ 20.35 17.00 15.92 14.97 PMD1208PMB1-A(2).GN

80 x 38 24 24 Ball 0.40 9.6 5700 84.1 0.74 55.2 — 259-1418-ND◆ 22.42 18.72 17.53 16.49 PMD2408PMB1-A (2).GN

48 48 Ball 0.19 9.1 5700 84.1 0.74 55.2 — 259-1419-ND◆ 23.36 19.51 18.27 17.18 PMD4808PMB1-A (2).GN

12

5 ~ 13.8 Vapo 0.16 1.9 2800 49 0.16 34 — 259-1359-ND◆ 6.20 5.18 4.86 4.57 KDE1209PTV1 13.MS.A.GN

92 x 25

12 Ball 0.46 5.5 4200 77 0.37 48 — 259-1420-ND◆ 14.57 12.17 11.40 10.72 PMD1209PTB1-A (2).GN




92 x 38 24 24 Ball 0.51 12.2 4900 120.2 0.71 57.6 — 259-1424-ND◆ 22.42 18.72 17.53 16.49 PMD2409PMB1-A (2).GN



120 x 25 24 24 Ball 0.47 11.3 4500 150 0.62 54 — 259-1427-ND◆ 24.91 20.80 19.48 18.32 PMD2412PTB1-A (2).GN


6 ~ 13.8 Ball 1.6 19.2 4200 190 0.65 54 — 259-1376-ND◆ 27.59 23.04 21.58 20.29 PMD1212PMB1-A(2).GN

6 ~ 13.8 Ball 1.6 19.2 4200 190 0.65 54 Tac 259-1375-ND◆ 27.17 22.69 21.25 19.98 PMD1212PMB1-A(2).F.GN

12 10.2 ~ 13.8 Ball 1.7 21 4000 190 0.72 63 — 259-1262-ND 27.57 21.22 19.87 18.68 PSD1212PMB1 (2)

6 ~ 13.8 Ball 0.83 10 3400 153 0.43 48 Tac 259-1377-ND◆ 25.57 21.35 20.00 18.81 PMD1212PMB3-A(2).F.GN

10.2 ~ 13.8 Ball 0.63 7.6 3150 120 0.34 46.5 Tac 259-1261-ND 18.44 14.19 13.29 12.50 KD1212PMBX-6A. (F)

120 x 38 12

10.2 ~ 13.8 Ball 0.4 4.8 3100 90 0.28 44.5 — 259-1441-ND◆ 18.00 15.03 14.08 13.24 KD1212PTB1-6A.GN

12 Vapo 0.853 10.2 3000 145 0.32 50 — 259-1438-ND◆ 17.72 14.80 13.86 13.03 KDE1212PMV1 13.MS.A.GN

24 24 Vapo 0.413 9.9 3000 145 0.32 50 — 259-1439-ND◆ 18.26 15.25 14.28 13.43 KDE2412PMV1 13.MS.A.GN

48 Vapo 0.225 10.8 3000 145 0.32 50 — 259-1440-ND◆ 18.75 15.66 14.67 13.79 KDE4812PMV1 13.MS.A.GN

48

24 ~ 56 Ball 0.4 19.2 4200 190 0.65 54 — 259-1378-ND◆ 26.23 21.90 20.51 19.29 PMD4812PMB1-A(2).GN

NEW! Mighty Mini Fan Operating Air Static Noise Dim. Voltage Voltage Current Input Speed Flow Pressure Pressure Weight Digi-Key Price Each Sunon (mm) (VDC) (VDC) (mA) (W) (RPM) (I/min) (Pa) (dBA/5cm) (g) Part No. 1 10 25 50 Part No.

8 x 5 3 2.2 ~ 3.5 65 0.2 14000 0.32 2 19.5 0.44 259-1454-ND 27.38 22.86 21.41 20.14 UF385-100

8 8

5


L

Copal Electronics manufactures a range of Brushless DC Fans

in 16mm through 62mm sizes. Designed for applications in

portable electronic equipment, automotive and medical equipment;

these fans are ideal for cooling a specific area on a PCB or in an

electronic assembly where space is limited.

Features:• Patented impeller design which improves airflow and reduces

vibration • Low noise of 3dBA ~ 24dBA • Long life ball and/or

sleeve bearing designs • Frame and impeller made of lightweight

UL94V-0 ABS/PBT alloy

Specifications: • Operating Temperature: -10°C ~ 60°C

• Storage Temperature: -30°C ~ 70°C

Brushless DC Fans Dimensions Bearing Operating Current Air Flow Noise Digi-Key Price Each Copal Electronics Fig. (mm) Type Voltage (VDC) (A) (CFM) (dBA) Part No. 1 10 100 500 Part No. 16 x 16 x 4 Sleeve 3.3 .02 .424 3 563-1106-ND 13.94 12.95 11.71 9.96 F16EA-03LLC /E

16 x 16 x 4.5 Sleeve 5 .04 .424 3 563-1107-ND 13.94 12.95 11.71 9.96 F16FB-05LLC /E

17 x 17 x 8 Sleeve 5 .03 .530 7 563-1108-ND 15.51 14.41 13.02 11.09 F17HA-05MC

5 .05 1.41 11 563-1111-ND 13.34 12.39 11.20 9.53 F251R-05LLC

Sleeve 12 .03 1.41 11 563-1115-ND 13.34 12.39 11.20 9.53 F251R-12LLC

12 .02 1.24 9 563-1117-ND 13.34 12.39 11.20 9.53 F251R-12L3C 12 .08 1.62 12 563-1121-ND 13.34 12.39 11.20 9.53 F251T-12LLC

5 .06 1.77 15 563-1109-ND 16.27 15.11 13.66 11.63 F251R-05LB 5 .05 1.41 11 563-1110-ND 16.27 15.11 13.66 11.63 F251R-05LLB 25 x 25 x 10 5 .04 1.24 9 563-1112-ND 16.27 15.11 13.66 11.63 F251R-05L3B 5 .05 1.41 11 563-1119-ND 16.27 15.11 13.66 11.63 F251RF-05LLB 1 Sleeve/1 Ball 12 .05 2.12 20 563-1113-ND 16.27 15.11 13.66 11.63 F251R-12MB

12 .03 1.41 11 563-1114-ND 16.27 15.11 13.66 11.63 F251R-12LLB 12 .02 1.24 9 563-1116-ND 16.27 15.11 13.66 11.63 F251R-12L3B 12 .04 1.77 15 563-1118-ND 16.27 15.11 13.66 11.63 F251R-12LB 12 .03 1.41 11 563-1120-ND 16.27 15.11 13.66 11.63 F251RF-12LLB

5 .07 3.18 17 563-1123-ND 13.34 12.39 11.20 9.53 F310R-05LC 1

Sleeve 5 .05 2.12 13 563-1124-ND 13.34 12.39 11.20 9.53 F310R-05LLC

12 .04 3.18 17 563-1126-ND 13.34 12.39 11.20 9.53 F310R-12LC

30 x 30 x 10 12 .025 2.12 13 563-1127-ND 13.34 12.39 11.20 9.53 F310R-12LLC

5 .07 3.18 17 563-1122-ND 16.27 15.11 13.66 11.63 F310R-05LB

1 Sleeve/1 Ball 5 .07 3.18 17 563-1128-ND 16.27 15.11 13.66 11.63 F310RF-05LB

12 .04 3.18 17 563-1125-ND 16.27 15.11 13.66 11.63 F310R-12LB 12 .04 3.18 17 563-1129-ND 16.27 15.11 13.66 11.63 F310RF-12LB

5 .08 3.88 12 563-1130-ND 12.94 12.02 10.87 9.25 F410T-05LC

40 x 40 x 10 Sleeve 5 .12 5.30 18 563-1132-ND 12.94 12.02 10.87 9.25 F410T-05MC

12 .04 3.88 12 563-1131-ND 12.94 12.02 10.87 9.25 F410T-12LC 12 .06 5.30 18 563-1133-ND 12.94 12.02 10.87 9.25 F410T-12MC

5 .08 3.88 16 563-1135-ND 14.94 13.88 12.54 10.68 F412R-05LB 5 .10 5.30 23 563-1138-ND 14.94 13.88 12.54 10.68 F412R-05MB 12 .04 3.53 14 563-1134-ND 14.94 13.88 12.54 10.68 F412R-12LLB 41 x 41 x 12.2 1 Sleeve/1 Ball 12 .04 3.88 16 563-1136-ND 14.94 13.88 12.54 10.68 F412R-12LB 12 .06 5.30 23 563-1139-ND 14.94 13.88 12.54 10.68 F412R-12MB

24 .03 3.88 16 563-1137-ND 14.94 13.88 12.54 10.68 F412R-24LB 24 .04 5.30 23 563-1140-ND 14.94 13.88 12.54 10.68 F412R-24MB

2 45 x 45 x 5 Sleeve 5 .14 1.06 23 563-1141-ND 31.84 29.57 26.73 22.75 F455B-05MD

Fig. 1

Fig. 2

Dimensions Voltage Air Flow Life Expectancy Digi-Key Price Each Sunon (mm) (VDC) (CFM) (hours) Part No. 1 10 25 50 Part No.

92 x 25 12 56 30,000 259-1437-ND 141.00 117.73 110.25 103.69 TC014-06001

WATURBO CPU CoolerThe world’s newest innovation in liquid cooling - The Sunon Waturbo system uses the fan motor to drive the liquid pump. The Sunon Waturbo uses the magnetic coupling to transmit the driving torque of the impeller to the liquid pump in the heat sink. This means that no pump motor or other electronic parts are required to cool the water.

◆ RoHS Compliant ‡ Plastic Housing (Fan Blades - PBT 94V-O) † Aluminum Housing (Fan Blades - PBT 94V-O) ◊ Locked Rotor Sensor Please Note: Custom Fan Cable Assemblies available upon request

Features:

• Exceptional cooling per for mance, radiating blower with

one directional exhaust

• Low noise via highly efficient fan blade design

• Low power con sump tion and high motor efficiency

through radial gap type motor design

• Oper ating Temperature: 0°C ~ 70°C

Blowers

Dimensions Volt- Operating Air Static Pressure Noise (mm) age Voltage Bearing Current Input Speed Flow (@ 1” or Pressure Digi-Key Price Each Sunon Fig. A x B x C (VDC) (VDC) Type (A) (W) (RPM) (CFM) 25.4mm – H20) (dBA) Part No. 1 10 25 50 Part No.

Power Motor Blowers

75 x 75 x 30

12 6 ~ 13.8 Ball 0.300 3.60 3400 13.60 0.60 43.5 259-1365-ND◆‡ 15.84 13.23 12.39 11.65 PMB1275PNB1-AY(2).GN

6 ~ 13.8 Ball 0.130 1.60 2400 9.60 0.27 33.9 259-1366-ND◆‡ 15.84 13.23 12.39 11.65 PMB1275PNB3-AY(2).GN

10.2 ~ 13.8 Ball 0.300 3.60 2700 22.40 0.43 50.0 259-1298-ND‡ 21.22 15.94 14.91 14.01 PMB1297PYB3-AY (2)

1 97 x 94 x 33 12 6 ~ 12 Ball 0.720 8.60 3600 30.50 0.92 55.8 259-1367-ND◆‡ 20.00 16.70 15.64 14.71 PMB1297PYB1-AY(2).GN

6 ~ 12 Ball 0.300 3.60 2700 22.40 0.43 50.0 259-1368-ND◆◊‡ 23.41 19.55 18.31 17.22 PMB1297PYB3-AY(2).R.GN

6 ~ 13.8 Ball 0.820 9.80 2500 35.90 0.89 53.8 259-1363-ND◆‡ 23.08 19.27 18.05 16.97 PMB1212PLB2-A(2).GN 120 x 120 x 32 12 10.2 ~ 13.8 Ball 0.450 5.40 2100 31.40 0.64 49.6 259-1300-ND‡ 25.02 18.79 17.58 16.52 PMB1212PLB3-A(2) 6 ~ 13.8 Ball 0.450 5.40 2100 31.40 0.64 49.6 259-1364-ND◆‡ 23.08 19.27 18.05 16.97 PMB1212PLB3-A(2).GN

MagLev® Green Motor Blowers 6 ~ 13.8 Vapo 0.170 2.00 6000 4.70 0.97 42.2 259-1316-ND◆‡ 9.07 7.58 7.10 6.68 GB1205PHVX-8AY.GN 50 x 50 x 15 12 5 ~ 13.8 Vapo 0.060 0.70 4000 3.00 0.40 33.4 259-1292-ND‡ 14.41 10.83 10.13 9.51 GB1205PHV2-8AY 6 ~ 13.8 Vapo 0.060 0.70 4000 3.00 0.40 33.4 259-1315-ND◆‡ 9.07 7.58 7.10 6.68 GB1205PHV2-8AY.GN

1 6 ~ 13.8 Vapo 0.124 1.50 5200 5.70 0.66 35.0 259-1317-ND◆‡ 9.07 7.58 7.10 6.68 GB1205PKV1-8AY.GN

50 x 50 x 20 12 5 ~ 13.8 Vapo 0.090 1.10 4400 4.80 0.46 30.0 259-1294-ND‡ 14.93 11.22 10.50 9.86 GB1205PKV3-8AY 6 ~ 13.8 Vapo 0.088 1.10 4400 4.80 0.46 30.0 259-1318-ND◆‡ 9.07 7.58 7.10 6.68 GB1205PKV3-8AY.GN

60 x 60 x 15

12

6 ~ 13.8 Vapo 0.105 1.3 4800 5.2 0.44 40.5 259-1455-ND◆† NEW! 8.55 7.15 6.69 6.29 GB1206PHV1-AY GN 6 ~ 13.8 Vapo 0.04 0.5 3200 3.5 0.18 29.0 259-1456-ND◆† NEW! 8.55 7.15 6.69 6.29 GB1206PHV3-AY GN

25 x 25 x 10 5 3.5 ~ 6 Vapo 0.090 0.5 12000 1.00 0.30 32.0 259-1444-ND◆‡ 14.55 10.91 10.37 9.66 GB0502PFV1-8.B2393.GN

30 x 30 x 10 5 3 ~ 6 Vapo 0.103 0.5 10000 1.20 0.32 30.9 259-1445-ND◆‡ 17.00 12.77 11.95 11.23 GB0503PFV1-8 B1837.GN

35 x 35 x 4.8 5 3 ~ 6 Ball 0.16 0.8 9500 0.9 0.31 31.0 259-1447-ND◆† NEW! 14.59 12.19 11.42 10.74 GB0535ACB1-8.B2208.GN

35 x 35 x 6

5 3 ~ 6 Vapo 0.12 0.6 8500 1.0 0.32 31.0 259-1448-ND◆† NEW! 14.36 11.70 10.96 10.30 GB0535AEV1-8.B2445.GN

2 3 ~ 5 Vapo 0.085 0.4 7800 0.90 0.23 26.2 259-1450-ND◆† NEW! 13.87 11.58 10.85 10.20 GB0535AEV1-8A B1360.F.GN

35 x 35 x 7 5 2.5 ~ 6 Vapo 0.100 0.5 8000 1.18 0.30 29.6 259-1451-ND◆† NEW! 15.25 12.74 11.93 11.22 GB0535ADV1-8.B2336.GN

40 x 40 x 7 5 3 ~ 5 Vapo 0.080 0.4 7500 1.5 0.34 33.0 259-1452-ND◆† NEW! 16.00 13.37 12.52 11.77 GB0504ADV1-8.B2471.F.GN

40 x 40 x 9 5 4 ~ 6 Vapo 0.049 0.3 5500 1.5 0.21 24.5 259-1453-ND◆† NEW! 15.25 12.74 11.93 11.22 GB0504AFV1-8.B2493.GN

45 x 45 x 9 5 3 ~ 6 Vapo 0.070 0.35 5500 2.20 0.26 29.0 259-1446-ND◆† 17.00 12.77 11.95 11.23 GB0545AFV1-8.B1824.GN

MagLev® Motor Blowers

2 25 x 25 x 10 5 4 ~ 6 Ball 0.12 0.60 10000 0.8 0.25 30.0 259-1167-ND‡ 13.75 10.31 9.80 9.13 B0502AFB2-8 (MS)

4 ~ 6 Ball 0.18 0.90 14000 1.0 0.40 37.0 259-1166-ND† 14.36 10.77 10.23 9.53 B0502AFB1-8 (MS)

A

B

CFig. 1 Fig. 2 NEW!

A

B

C


L

(Continued)

UL yellow card E38324, CSA file 27697, VDE file 3041, CCC (ACmaxx), CE (ACmaxx)Fans

Please Note: Custom Fan Cable Assemblies available upon request. * Requires Mating Housing Connector H10117 and Contacts H10119 ◆ RoHS Compliant


Please Note: Custom Fan Cable Assemblies available upon request. ◆ RoHS Compliant

Size Voltage CFM Digi-Key Price Each ebmpapst Ind. Fig. (mm) Voltage Range Bearing Watts @ 0 dBA Leads Part No. 1 25 50 100 Part No.

Brushless DC Tubeaxial Fans

40 x 10

12 10~14 Sleeve 0.8 5.3 26 28 AWG 12.2” Leads 381-1081-ND◆ 12.93 9.90 9.08 7.98 412FH

24 20~28 Sleeve 0.8 4.7 22 28 AWG 12.2” Leads 381-1082-ND◆ 13.16 10.08 9.24 8.12 414F

40 x 20

12 10~14 Sleeve 1.0 5.9 18 28 AWG 12.2” Leads 381-1069-ND◆ 13.16 10.08 9.24 8.12 412

24 20~28 Sleeve 1.0 5.9 18 28 AWG 12.2” Leads 381-1070-ND◆ 14.81 11.34 10.40 9.14 414

40 x 25

12 8~14 Ball 3.3 14 46 28 AWG 12.2” Leads 381-1125-ND◆ 34.31 26.28 24.09 21.17 412JHH

24 18~27 Ball 3.6 14 46 28 AWG 12.2” Leads 381-1126-ND◆ 34.31 26.28 24.09 21.17 414JHH

8~15 Ball .53 12.4 22 22 AWG 12.2” Leads 381-2266-ND◆ 27.14 20.79 19.06 16.75 622L

12 8~15 Ball 1.9 23.5 36 22 AWG 12.2” Leads 381-2267-ND◆ 27.14 20.79 19.06 16.75 622N

1 8~15 Ball 2.3 27.1 39 22 AWG 12.2” Leads 381-2264-ND◆ 28.67 21.96 20.13 17.69 622H

60 x 25

8~15 Ball 3.5 33 43 22 AWG 12.2” Leads 381-2265-ND◆ 28.67 21.96 20.13 17.69 622HH

18~28 Ball 1 12.4 22 22 AWG 12.2” Leads 381-2270-ND◆ 27.14 20.79 19.06 16.75 624L

18~28 Ball 1.5 17.7 29 22 AWG 12.2” Leads 381-2271-ND◆ 27.14 20.79 19.06 16.75 624M

24 18~28 Ball 2.2 23.5 36 22 AWG 12.2” Leads 381-2272-ND◆ 27.14 20.79 19.06 16.75 624N

18~28 Ball 2.3 27.1 39 22 AWG 12.2” Leads 381-2268-ND◆ 28.67 21.96 20.13 17.69 624H

18~28 Ball 3.6 33 43 22 AWG 12.2” Leads 381-2269-ND◆ 28.67 21.96 20.13 17.69 624HH

60 x 32

12 7~13.6 Ball 7.7 41.1 53 24 AWG 12.2” Leads 381-2282-ND◆ 37.13 28.44 26.07 22.91 612JH

24 14~26.4 Ball 7.7 41.1 53 24 AWG 12.2” Leads 381-2283-ND◆ 37.13 28.44 26.07 22.91 614JH

70 x 15

12 8~13.8 Sintec 1.7 26 36 28 AWG 12.2” Leads 381-1128-ND◆ 27.14 20.79 19.06 16.75 712F

24 12~30 Sintec 1.7 26 36 28 AWG 12.2” Leads 381-1127-ND◆ 27.14 20.79 19.06 16.75 714F

ACmaxx Tubeaxial Fans: Used in the industrial sector in switch cabinets, filter fans, welding machines, refrigerated shelves or counters, ventilation and air conditioning systems.

Features: • 85 ~ 265 volts, 50 and 60 Hertz for worldwide voltages • ≤75% lower power consumption • Fans have integrated intelligence for flexibility in applications • High volume flow

Size Input CFM Digi-Key Price Each ebmpapst Ind. Fig. (mm) Bearing Voltage Watts @ 0 dBA Leads Part No. 1 25 50 100 Part No.

ACmaxx Tubeaxial Fans — RoHS Compliant

1 92 x 38 Ball 115/230 11 86 55 22 AWG 12.2” Leads 381-2284-ND 68.15 52.20 47.85 42.05 AC3200JH

119 x 32 Ball 115/230 11 120 51 22 AWG 12.2” Leads 381-2285-ND 60.04 45.99 42.16 37.05 AC4300H

3 178 x 165 x 50 Ball 115/230 12 206 50 22 AWG 12.2” Leads 381-2286-ND 83.50 73.07 66.80 58.45 AC6200NM

AC Tubeaxial Fans Sleeve 115 8 21 21 18 AWG 12.2" Leads 381-1057-ND◆ 39.13 29.97 27.48 24.15 8830N Sleeve 115 11 28 28 18 AWG 12.2" Leads 381-1106-ND◆ 39.60 30.33 27.81 24.44 8800N Sleeve 115 11 34 41 .110"x.02" Terminals 381-1051-ND◆ 33.72 25.83 23.68 20.81 8500A Sleeve 115 11 36 34 18 AWG 12.2" Leads 381-1103-ND 35.96 27.54 25.25 22.19 8500N

80 x 38 Sleeve 115 11 36 34 18 AWG 12.2" Leads 381-1102-ND 40.77 31.23 28.63 25.16 8500DP

Sleeve 230 11 36 34 18 AWG 12.2" Leads 381-1105-ND 35.72 27.36 25.08 22.04 8550N Sleeve 115 11 36 34 22 AWG 12.2" Leads 381-1052-ND◆ 32.88 28.44 26.14 22.22 8500VW Ball 115 11 36 35 22 AWG 12.2" Leads 381-1104-ND◆ 42.89 32.85 30.12 26.47 8506N Ball 115 11 36 34 22 AWG 12.2" Leads 381-1053-ND◆ 40.73 35.19 32.36 27.51 8506VW Ball 230 11 36 34 22 AWG 12.2" Leads 381-1055-ND 41.06 35.55 32.60 27.77 8556VW

92 x 25 Ball 115 9 41 40 .110"x.02" Terminals 381-1076-ND◆ 39.13 29.97 27.48 24.15 3906

92 x 38 Ball 115 11 52 42 18 AWG 12.2" Leads 381-1075-ND◆ 47.71 36.54 33.50 29.44 3606

Ball 115 8 59 35 .110"x.02" Terminals 381-1107-ND 42.18 32.31 29.62 26.03 9906L 119 x 25 Ball 115 12 79 42 .110"x.02" Terminals 381-1078-ND◆ 42.18 32.31 29.62 26.03 9906 Ball 230 12 79 42 .110"x.02"Terminals 381-1079-ND 42.18 32.31 29.62 26.03 9956

Sleeve 115 12 71 32 .110"x.02" Terminals 381-1026-ND◆ 42.18 32.31 29.62 26.03 4530Z 1 Sleeve 230 19 94 40 .110"x.02" Terminals 381-1033-ND◆ 33.49 25.65 23.52 20.67 4650Z Ball 230 19 94 40 .110"x.02" Terminals 381-1035-ND◆ 44.65 34.20 31.35 27.55 4656Z Sleeve 115 18 106 50 .110"x.02" Terminals 381-1089-ND◆ 34.78 26.64 24.42 21.46 4600N Sleeve 115 18 106 50 .110"x.02" Terminals 381-1090-ND◆ 29.02 22.23 20.38 17.91 4600X

Sleeve 230 18 106 50 .110"x.02" Terminals 381-1093-ND◆ 34.78 26.64 24.42 21.46 4650N

119 x 38 Sleeve 230 18 106 50 .110"x.02" Terminals 381-1094-ND 32.43 24.84 22.77 20.01 4650X

Ball 115 18 106 51 .110"x.02" Terminals 381-1091-ND◆ 41.95 32.13 29.46 25.89 4606N Ball 230 18 106 51 .110"x.02" Terminals 381-1095-ND◆ 42.42 32.49 29.79 26.18 4656X Ball 115 18 106 45 .118"x.02" Terminals 381-1030-ND◆ 44.89 34.38 31.52 27.70 4606VX

Ball 230 18 106 45 .118"x.02" Terminals 381-1034-ND◆ 60.28 46.17 42.33 37.20 4656VX-817 Sleeve 115 18 106 45 .110"x.02" Terminals 381-1029-ND◆ 37.48 28.71 26.32 23.13 4600Z Ball 115 18 106 45 .110"x.02" Terminals 381-1031-ND◆ 45.71 35.01 32.10 28.21 4606Z Ball 115 18 106 45 22 AWG 12.2" Leads 381-1092-ND◆ 48.18 36.90 33.83 29.73 4606ZW

127 x 38

Ball 115 17 121 47 .110"x.02" Terminals 381-1119-ND◆ 49.82 38.16 34.98 30.74 5908-105 Sleeve 115 17 121 47 .110"x.02" Terminals 381-1120-ND◆ 47.24 36.18 33.17 29.15 5900-505

135 x 38 Ball 230 26 159 50 .110"x.02" Terminals 381-1096-ND 85.78 65.70 60.23 52.93 5656S

Ball 115 38 225 52 20 AWG 13.3" Leads 381-1121-ND◆ 84.13 64.44 59.07 51.91 W2S130-AA25-01 150 x 55 Ball 230 46 250 60 20 AWG 13.3" Leads 381-1123-ND◆ 84.13 64.44 59.07 51.91 W2S130-BM03-01 Ball 115 46 263 60 20 AWG 13.3" Leads 381-1124-ND◆ 76.38 58.50 53.63 47.13 W2S130-BM15-01

2 172 x 51

Ball 115 26 260 58 PSC 0.11" Terminals 381-1065-ND 103.52 79.29 72.69 63.88 W2E143-AA15-01 Ball 230 29 295 58 PSC 0.11" Terminals 381-1066-ND◆ 108.81 83.34 76.40 67.14 W2E143-AB09-01

172 x 150 x 38

Ball 230 28 230 57 0.11" Terminals 381-1062-ND◆ 100.93 77.31 70.87 62.28 W2E142-BB01-01 Ball 115 24 230 57 0.11" Terminals 381-1063-ND 132.31 101.34 92.90 81.64 W2E142-BB05-01

3 225 x 80 Ball 115 80 606 61 Terminal Block 381-2281-ND◆ 154.40 135.10 123.52 108.08 W2E200-HK86-01

AC Flatpak Blowers — RoHS Compliant

4

121 x 37 Sleeve 115 20 25 60 22 AWG 12.2" Leads 381-1058-ND 54.05 41.40 37.95 33.35 RL90-18/00

Sleeve 230 20 25 60 22 AWG 12.2" Leads 381-1061-ND 61.69 47.25 43.32 38.07 RL90-18/50


L

Fans (Cont.)

Size Voltage CFM Impeller Digi-Key Price Each ebmpapst Ind. Fig. (mm) Voltage Range @ 0 dBA Watts Material Part No. 1 25 50 100 Part No.

DC Motorized Impellers

5 102 x 52 12 11~13 90 69 13.5 Plastic 381-1129-ND 117.15 89.73 82.26 72.29 RER101-36/12/12P

Size Input CFM Impeller Dimensions Impeller Digi-Key Price Each ebmpapst Ind. Fig. (mm) Voltage Watts @ 0 dBA Inches (mm) Capacitor Material Part No. 1 25 50 100 Part No.

AC Backward Curved Motorized Impellers — RoHS Compliant

5

220 x 71 115 96 500 71 8.66” (220) x 2.8” (71) 10 Plastic 381-1110-ND 104.81 80.28 73.59 64.67 R2E220-AA44-23

230 100 530 71 8.66” (220) x 2.8” (71) 2 Plastic 381-1109-ND 104.81 80.28 73.59 64.67 R2E220-AA40-23

Size Input CFM Impeller Dimensions Impeller Digi-Key Price Each ebmpapst Ind. Fig. (mm) Voltage Watts @ 0 dBA Inches (mm) Material Part No. 1 25 50 100 Part No.

DC Backward Curved Motorized Impellers — RoHS Compliant

5 133 x 91 24 28 212 63 5.25” (133) x 2.39” (60.6) Plastic 381-1154-ND 190.90 167.04 152.72 133.63 R1G133-AA17-02

175 x 69 48 36 330 65 6.9” (175) x 2.72” (69) Plastic 381-1159-ND 150.80 131.95 120.64 105.56 R1G175-AB41-02

Please Note: Custom Fan Cable Assemblies available upon request. * Requires Mating Housing Connector H10117 and Contacts H10119 ◆ RoHS Compliant

Size Voltage CFM Digi-Key Price Each ebmpapst Ind. Fig. (mm) Voltage Range Bearing Watts @ 0 dBA Leads Part No. 1 25 50 100 Part No.

7~15 Ball 0.8 21 21 24 AWG 12.2” Leads 381-1101-ND◆ 23.62 18.09 16.59 14.58 8412L

12 7~15 Ball 1.4 27 29 24 AWG 12.2” Leads 381-1049-ND◆ 23.62 18.09 16.59 14.58 8412M

80 x 25 7~15 Ball 2.4 33 35 24 AWG 12.2” Leads 381-1010-ND◆ 23.62 18.09 16.59 14.58 8412

24

12~28 Ball 1.4 27 29 24 AWG 12.2” Leads 381-1050-ND◆ 23.62 18.09 16.59 14.58 8414M

12~28 Ball 2.4 33 35 24 AWG 12.2” Leads 381-1011-ND◆ 23.62 18.09 16.59 14.58 8414


80 x 32

12 6~15 Ball 2.2 32 36 22 AWG 12.2” Leads 381-1008-ND◆ 31.02 23.76 21.78 19.14 8312

6~15 Ball 4 39 43 22 AWG 12.2” Leads 381-1133-ND◆ 31.02 23.76 21.78 19.14 8312HL

48 36~56 Ball 2.6 32 36 22 AWG 12.2” Leads 381-1077-ND◆ 31.02 23.76 21.78 19.14 8318

7~13.8 Ball 10 77.7 55 24 AWG 12.2” Leads 381-2273-ND◆ 42.65 32.67 29.95 26.32 8212JN

80 x 38

12

8~16 Ball 3 35 39 22 AWG 12.2” Leads 381-1100-ND◆ 60.20 52.02 47.85 40.64 8112K

24

18~26.4 Ball 10 77.7 55 24 AWG 12.2” Leads 381-2274-ND◆ 42.65 32.67 29.95 26.32 8214JN

18~30 Ball 3 35 39 22 AWG 12.2” Leads 381-1047-ND 67.92 52.02 47.69 41.91 8124K

12

7~15 Ball 1.3 36 27 24 AWG 12.2” Leads 381-1080-ND◆ 24.56 18.81 17.25 15.16 3412L

92 x 25


24

12~28 Ball 2.6 49 36 24 AWG 12.2” Leads 381-1001-ND◆ 24.56 18.81 17.25 15.16 3414

18~28 Ball 2.3 49.4 32 24 AWG 12.2” Leads 381-1160-ND◆ 27.14 20.79 19.06 16.75 3414N

92 x 32

12 6~15 Ball 2.4 47 37 22 AWG 12.2” Leads 381-1073-ND◆ 31.26 23.94 21.95 19.29 3312

24 12~28 Ball 2.4 47 37 22 AWG 12.2” Leads 381-1074-ND 31.26 23.94 21.95 19.29 3314

119 x 25

12 7~14 Ball 3.2 82 38 22 AWG 12.2” Leads 381-1024-ND◆ 29.85 22.86 20.96 18.42 4412FM

24 12~28 Ball 3.2 82 38 22 AWG 12.2” Leads 381-1025-ND 31.26 23.94 21.95 19.29 4414FM


12 6~15 Ball 5 100 45 22 AWG 12.2” Leads 381-1002-ND◆ 32.20 24.66 22.61 19.87 4312

1

119 x 32 6~15 Ball 5 100.1 45 22 AWG 12.2” Leads 381-2263-ND◆ 34.31 26.28 24.09 21.17 4312/2

24


12~28 Ball 5 100 45 22 AWG 12.2” Leads 381-1003-ND◆ 32.20 24.66 22.61 19.87 4314

48 36~53 Ball 5 100 45 22 AWG 12.2” Leads 381-1004-ND◆ 35.72 27.36 25.08 22.04 4318

7~14.5 Ball 1.2 51 29 22 AWG 12.2” Leads 381-1016-ND◆ 42.42 32.49 29.79 26.18 4212L

7~14.5 Ball 2.2 75 38 22 AWG 12.2” Leads 381-1017-ND◆ 42.42 32.49 29.79 26.18 4212M

12

7~15 Ball 4.5 106 49 .110” x .02” Terminals 381-1014-ND◆ 46.18 35.37 32.43 28.50 4182NX

7~14.5 Ball 5.3 108 49 22 AWG 12.2” Leads 381-1084-ND◆ 42.42 32.49 29.79 26.18 4212H

7~15 Ball 21 162 60 22 AWG 12.2” Leads 381-1142-ND 96.50 84.44 77.20 67.55 DV4112/2NP-3021

9~15 Ball 21 161.9 60 22 AWG 12.2” Leads 381-2275-ND◆ 77.00 67.38 61.60 53.90 DV4112N

12~28 Ball 5.3 108 49 22 AWG 12.2” Leads 381-1085-ND◆ 42.42 32.49 29.79 26.18 4214H

12~29 Ball 4.5 106 49 .110” x .02” Terminals 381-1015-ND◆ 53.35 40.86 37.46 32.92 4184NX

119 x 38 24

12~25 Ball 11 140 59 22 AWG 12.2” Leads 381-1139-ND 54.05 41.40 37.95 33.35 4114NXH

12~25 Ball 11 140 59 .110” x .02” Terminals 381-1134-ND◆ 56.52 43.29 39.69 34.88 4184NXH

16~30 Ball 19.5 182.4 65 22 AWG 12.2” Leads 381-1161-ND◆ 75.32 57.69 52.89 46.48 4114NH3


36~56 Ball 5.6 108 49 .110 x .02” Terminals 381-1087-ND◆ 46.88 35.91 32.92 28.93 4298H

48

36~56 Ball 16 157 63 22 AWG 10.6” Leads 381-1138-ND* 144.20 126.18 115.36 100.94 W1G110-AG07-06


36~56 Ball 19.5 182.4 65 22 AWG 12.2” Leads 381-1162-ND◆ 69.09 52.92 48.51 42.63 4118N/2H3

8~16 Ball 4.5 118 44 .110” x .02” Terminals 381-1115-ND 68.15 52.20 47.85 42.05 W2G115-AD15-13

12 7~14 Ball 6 127 46 22 AWG 12.2” Leads 381-1131-ND◆ 49.12 37.62 34.49 30.31 5212NN


12~28 Ball 6 127 46 22 AWG 12.2” Leads 381-1132-ND◆ 49.12 37.62 34.49 30.31 5214NN

127 x 38

24 16~30 Ball 21 158.9 56 22 AWG 12.2” Leads 381-2279-ND◆ 79.00 69.13 63.20 55.30 DV5214N

16~28 Ball 12 160 52 .110” x .02” Terminals 381-1068-ND◆ 87.19 66.78 61.22 53.80 W2G115-AG71-12

48


43~53 Ball 22 159 56 22 AWG 12.2” Leads 381-1147-ND 109.80 96.08 87.84 76.86 DV5218/2NP-40182

12~28 Ball 18 241 57 .118” x .02” Terminals 381-1005-ND◆ 85.78 65.70 60.23 52.93 6424

24

12~28 Ball 26 283 61 .118” x .02” Terminals 381-1043-ND◆ 99.52 76.23 69.88 61.41 6224NH

2

172 x 51 12~28 Ball 26 283 63 .118” x .02” Terminals 381-1046-ND◆ 102.93 78.84 72.27 63.51 6424H

16~30 Ball 37 318 63 22 AWG 12.2” Leads 381-1156-ND 111.10 97.22 88.88 77.77 DV6224

48

28~60 Ball 17 241 55 .118” x .02” Terminals 381-1045-ND◆ 85.78 65.70 60.23 52.93 6248N

40~60 Ball 37 318 63 22 AWG 12.2” Leads 381-1157-ND◆ 111.10 97.22 88.88 77.77 DV6248

DC Flatpak Blowers

76 x 27

12 8~13.5 Ball 5 16.5 51 22 AWG 12.2” Leads 381-1148-ND◆ 40.54 31.05 28.47 25.02 RL48-19/12

24 18~26.4 Ball 5 16.5 51 22 AWG 12.2” Leads 381-1149-ND 34.78 26.64 24.42 21.46 RL48-19/14

97 x 93.5 x 33 12 8~12 Ball 12.5 32.4 62 26 AWG 12.2” Leads 381-1150-ND◆ 49.12 37.62 34.49 30.31 RL65-21/12/2

4 121 x 37

12 7~15 Ball 5 24 58 22 AWG 12.2” Leads 381-1059-ND◆ 61.92 47.43 43.48 38.21 RL90-18/12N

24 12~28 Ball 5 24 58 22 AWG 12.2” Leads 381-1060-ND◆ 61.92 47.43 43.48 38.21 RL90-18/14N

127 x 25

12 8~15 Ball 8 37.7 60 22 AWG 12.2” Leads 381-1151-ND◆ 72.20 63.18 57.76 50.54 RLF100-11/12

24 6~30 Ball 8 37.7 60 22 AWG 12.2” Leads 381-1152-ND◆ 72.20 63.18 57.76 50.54 RLF100-11/14


L

DC Axial Fans and BlowersBroad product range covers axial fans from 25mm to 172mm and blowers from 30mm to 159mm.

Features: • Distinctive blade designs • Brushless • TS16949 accredited • ISO-9001 certified • Ball bearings • Lead wires

Rated Operating Rated Input Dimensions Rated Voltage Current Power Speed Noise Digi-Key Price Each Delta Finger Price Fig. (mm) Voltage Range (A) (W) (RPM) CFM (Db) Sensors Part No. 1 10 100 Part No. Guards Each

Axial Fans

25 x 25 x 10 12 7.0 ~13.2 .080 0.96 13000 2.40 28.0 — 603-1129-ND 12.72 8.40 6.96 AFB02512HHA-A — —

35 x 35 x 10 12 9.5 ~ 13.8 .090 1.08 7000 5.50 22.0 — 603-1128-ND 12.72 8.40 6.96 AFB03512HA-A CR378-ND .63

12 7.0 ~ 13.8 .060 .72 5000 5.90 24.5 — 603-1002-ND 9.78 7.44 6.38 EFB0412MA CR230-ND .63

40 x 40 x 10 12 7.0 ~ 13.8 .080 .96 6000 6.92 28.5 — 603-1003-ND 9.78 7.44 6.38 EFB0412HA CR230-ND .63

12 7.0 ~ 13.8 .100 1.20 7000 8.09 33.0 — 603-1004-ND 11.26 7.44 6.17 EFB0412HHA CR230-ND .63

40 x 40 x 15

12 7.0 ~ 13.8 .130 1.56 8300 11.48 32.0 — 603-1005-ND 11.81 9.09 7.62 AFB0412HHB CR230-ND .63

12 7.0 ~ 13.8 .250 3.00 11000 14.83 41.5 — 603-1006-ND 11.81 9.09 7.62 AFB0412SHB CR230-ND .63

5 4.5 ~ 5.5 .250 1.25 7600 8.54 28.5 — 603-1007-ND 10.93 8.32 7.13 EFB0405HD CR230-ND .63

5 4.5 ~ 5.5 .320 1.60 9000 10.10 32.5 Tac 603-1008-ND 13.25 8.75 7.25 EFB0405VHD-F00 CR230-ND .63

1 40 x 40 x 20 12 7.0 ~ 13.8 .080 0.96 7600 8.54 28.5 — 603-1009-ND 12.59 8.32 6.89 EFB0412HD CR230-ND .63

12 7.0 ~ 13.8 .120 1.44 9000 10.10 32.5 — 603-1010-ND 12.59 8.32 6.89 EFB0412VHD CR230-ND .63

24 14.0 ~ 27.6 .040 0.96 5000 5.54 22.0 — 603-1011-ND 10.93 8.32 7.13 EFB0424LD CR230-ND .63

12 4.5 ~ 13.8 .070 0.84 6500 10.59 32.1 Tac 603-1012-ND 16.43 10.85 8.99 FFB0412HN-F00 CR230-ND .63

12 4.0 ~ 13.8 .500 6.00 13000 24.00 51.5 Tac 603-1013-ND 18.82 12.43 10.30 FFB0412SHN-F00 CR230-ND .63

12 4.5 ~ 13.2 .160 1.92 9500 15.79 41.9 — 603-1014-ND 13.39 10.30 8.63 FFB0412VHN CR230-ND .63

40 x 40 x 28 12 4.5 ~ 13.2 .160 1.92 9500 15.79 41.9 — 603-1015-ND 16.43 10.85 8.99 FFB0412VHN-B CR230-ND .63

12 4.5 ~ 13.2 .160 1.92 9500 15.79 41.9 Tac 603-1016-ND 16.43 10.85 8.99 FFB0412VHN-F00 CR230-ND .63

12 4.5 ~ 13.2 .160 1.92 9500 15.79 41.9 Locked Rotor 603-1017-ND 16.43 10.85 8.99 FFB0412VHN-R00 CR230-ND .63

24 14.0 ~ 26.4 .100 2.40 9500 15.79 41.9 — 603-1018-ND 15.77 10.42 8.63 FFB0424VHN CR230-ND .63

2 40 x 40 x 48 12 7.0 ~ 13.2 .850 10.20 12000 24.00 60.0 Tac 603-1019-ND 31.14 20.57 17.04 GFB0412SHG-F00 CR230-ND .63

40 x 40 x 56 12 7.0 ~ 13.2 1.25 15.00 15000 27.30 59.5 Tac 603-1020-ND 31.14 20.57 17.04 GFB0412EHS-F00 CR230-ND .63

45 x 45 x 10 12 7.0 ~ 13.8 .110 1.32 5000 9.85 30.0 — 603-1021-ND 11.81 9.09 7.62 AFB04512MA — —

50 x 50 x 10

5 4.5 ~ 5.5 .130 0.65 4500 9.21 25.0 Tac 603-1022-ND 11.93 7.88 6.53 EFB0505MA-F00 CR379-ND .83

12 7.0 ~ 13.8 .100 1.20 5500 11.4 30.0 — 603-1023-ND 9.78 7.44 6.38 EFB0512HA CR379-ND .83

50 x 50 x 15 12 7.0 ~ 13.8 .100 1.20 5600 14.13 32.0 — 603-1024-ND 13.91 9.19 7.62 AFB0512HB CR379-ND .83

50 x 50 x 20 12 7.0 ~ 13.8 .160 1.92 7000 20.30 40.5 — 603-1025-ND 13.91 9.19 7.62 AFB0512VHD CR379-ND .83

60 x 60 x 10 12 7.0 ~ 13.8 .180 2.16 4800 21.19 36.5 — 603-1026-ND 12.59 8.32 6.89 EFB0612HHA CR221-ND .65

60 x 60 x 15

5 4.0 ~ 6.0 .300 1.50 4000 15.36 32.0 — 603-1027-ND 13.91 9.19 7.62 AFB0605HB CR221-ND .65

24 14.0 ~ 27.6 .080 1.92 4000 15.36 32.0 — 603-1028-ND 13.91 9.19 7.62 AFB0624HB CR221-ND .65

60 x 60 x 20 12 7.0 ~ 13.8 .150 1.80 4400 18.36 31.0 — 603-1029-ND 11.81 9.09 7.62 AFB0612HHD CR221-ND .65

12 4.0 ~ 13.8 .080 0.96 3100 16.81 26.5 — 603-1030-ND 15.50 10.24 8.49 AFB0612L-A CR221-ND .65

1 12 4.0 ~ 13.8 .140 1.68 4250 23.38 34.0 — 603-1031-ND 13.16 10.13 8.49 AFB0612H-A CR221-ND .65

12 4.0 ~ 13.8 .170 2.04 5000 27.55 40.0 — 603-1032-ND 11.81 9.09 7.62 AFB0612HH-A CR221-ND .65

60 x 60 x 25.4

12 4.0 ~ 13.8 .270 3.24 6000 34.15 44.5 Tac 603-1033-ND 16.83 11.12 9.21 AFB0612SH-ABF00 CR221-ND .65

12 4.0 ~ 13.8 .270 3.24 6000 34.15 44.5 Tac 603-1034-ND 16.17 10.68 8.85 AFB0612SH-AF00 CR221-ND .65

12 4.0 ~ 13.8 .380 4.56 6800 38.35 46.5 Tac 603-1035-ND 16.83 11.12 9.21 AFB0612EH-ABF00 CR221-ND .65

24 14.0 ~ 27.6 .090 2.16 4250 23.38 34.0 — 603-1036-ND 15.50 10.24 8.49 AFB0624H-A CR221-ND .65

24 14.0 ~ 27.6 .110 2.64 5000 27.55 40.0 — 603-1037-ND 15.50 10.24 8.49 AFB0624HH-A CR221-ND .65

12 4.5 ~ 13.8 .340 4.08 6000 36.73 46.5 — 603-1038-ND 18.15 11.99 9.94 FFB0612VHE CR221-ND .65

60 x 60 x 38

12 4.5 ~ 13.8 .550 6.60 7000 43.44 50.5 — 603-1039-ND 15.07 11.86 9.94 FFB0612SHE CR221-ND .65

12 4.5 ~ 13.8 .800 9.60 8000 50.15 54.5 — 603-1040-ND 18.15 11.99 9.94 FFB0612EHE CR221-ND .65

12 7.0 ~ 13.8 .680 8.16 9000 49.54 54.0 — 603-1041-ND 20.41 13.48 11.17 AFB0612VHE-A CR221-ND .65

2 60 x 60 x 50.8 12 7.0 ~ 13.8 .430 5.16 5000 32.14 50.5 — 603-1042-ND 24.70 20.14 17.29 GFB0612HHG CR221-ND .65

70 x 70 x 20 12 5.0 ~ 13.8 .250 3.00 4400 40.43 40.5 — 603-1043-ND 11.81 9.09 7.62 AFB0712HHD — —

12 5.0 ~ 12.6 .440 5.28 5500 51.97 47.5 — 603-1044-ND 13.91 9.19 7.62 AFB0712VH-A — —

70 x 70 x 25.4 12 5.0 ~ 13.8 .650 7.80 6300 61.05 50.5 — 603-1045-ND 16.30 10.77 8.92 AFB0712SH-AB — —

24 14.0 ~ 26.4 .090 2.16 3100 28.85 31.5 — 603-1046-ND 13.16 10.13 8.49 AFB0724M-A — —

1 80 x 80 x 15 12 7.0 ~ 13.8 .190 2.28 3700 39.20 39.5 Tac 603-1047-ND 14.58 9.63 7.98 AFB0812VHB-F00 CR180-ND .90

80 x 80 x 20 12 7.0 ~ 13.8 .220 2.64 4000 48.20 41.0 — 603-1048-ND 13.91 9.19 7.62 AFB0812SHD CR180-ND .90

5 4.5 ~ 5.5 .430 2.15 3000 35.31 31.0 — 603-1049-ND 13.91 9.19 7.62 AFB0805H CR180-ND .90

80 x 80 x 25.4 12 7.0 ~ 13.8 .160 1.92 3000 35.31 31.0 — 603-1050-ND 13.91 9.19 7.62 AFB0812H CR180-ND .90

12 7.0 ~ 13.8 .200 2.40 3250 37.43 34.0 — 603-1051-ND 13.91 9.19 7.62 AFB0812HH CR180-ND .90

(Continued)



L

DC Axial Fans and Blowers (Cont.)

Rated Operating Rated Input Dimensions Rated Voltage Current Power Speed Noise Digi-Key Price Each Delta Finger Price Fig. (mm) Voltage Range (A) (W) (RPM) CFM (Db) Sensors Part No. 1 10 100 Part No. Guards Each

12 7.0 ~ 13.8 .200 2.40 3250 37.43 34.0 Tac 603-1052-ND 14.58 9.63 7.98 AFB0812HH-F00 CR180-ND .90

80 x 80 x 25.4

12 7.0 ~ 13.2 .260 3.12 3500 47.22 41.7 — 603-1053-ND 19.01 14.94 12.90 FFB0812HH CR180-ND .90

12 7.0 ~ 13.8 .340 4.08 4000 46.62 40.0 Tac 603-1054-ND 14.58 9.63 7.98 AFB0812SH-F00 CR180-ND .90

12 7.0 ~ 13.2 .500 6.00 4500 67.02 48.6 — 603-1055-ND 19.01 14.94 12.90 FFB0812SH CR180-ND .90

1 12 7.0 ~ 13.8 .380 4.56 4200 57.21 44.5 — 603-1056-ND 18.15 11.99 9.94 FFB0812VHE CR180-ND .90

12 7.0 ~ 13.8 .580 6.96 4900 68.51 48.5 — 603-1057-ND 18.15 11.99 9.94 FFB0812SHE CR180-ND .90

80 x 80 x 38

12 7.0 ~ 13.8 .900 10.80 5700 80.16 52.5 Tac 603-1058-ND 18.82 12.43 10.30 FFB0812EHE-F00 CR180-ND .90

12 7.0 ~ 13.2 1.15 13.80 6600 89.95 59.8 — 603-1059-ND 22.22 17.48 14.65 FFB0812GHE CR180-ND .90

12 7.0 ~ 13.2 1.50 18.00 7500 102.02 62.2 — 603-1060-ND 20.20 16.47 14.14 FFB0812UHE CR180-ND .90

12 7.0 ~ 13.2 2.75 33.00 9000 132.56 65.0 — 603-1061-ND 26.80 21.85 18.76 PFB0812DHE CR180-ND .90

2 80 x 80 x 50.8 12 7.0 ~ 13.2 .730 8.76 4200 68.58 53.0 Tac 603-1062-ND 33.39 22.05 18.27 GFB0812SHG-F00 CR180-ND .90

92 x 92 x 20 24 14.0 ~ 27.6 .100 2.40 2700 54.60 35.0 — 603-1063-ND 11.81 9.09 7.62 AFB0924HD CR220-ND .74

12 7.0 ~ 13.8 .160 1.92 2850 51.21 34.0 — 603-1064-ND 13.91 9.19 7.62 AFB0912H CR220-ND .74

12 7.0 ~ 13.8 .250 3.00 3200 57.92 38.0 — 603-1065-ND 13.91 9.19 7.62 AFB0912HH CR220-ND .74

12 7.0 ~ 13.8 .600 7.20 3700 81.97 48.2 — 603-1066-ND 15.07 11.86 9.94 FFB0912VH CR220-ND .74

92 x 92 x 25.4 12 7.0 ~ 13.8 .400 4.80 3800 67.80 45.0 — 603-1067-ND 11.81 9.09 7.62 AFB0912VH CR220-ND .74

24 14.0 ~ 27.6 .080 1.92 2450 43.79 30.0 — 603-1068-ND 11.81 9.09 7.62 AFB0924M CR220-ND .74

24 14.0 ~ 27.6 .100 2.40 2850 51.21 34.0 — 603-1069-ND 13.91 9.19 7.62 AFB0924H CR220-ND .74

24 14.0 ~ 27.6 .220 5.28 3800 67.80 45.0 — 603-1070-ND 13.91 9.19 7.62 AFB0924VH CR220-ND .74

12 7.0 ~ 13.2 1.22 14.64 6000 129.31 60.5 — 603-1071-ND 27.30 22.25 19.11 PFB0912GHE CR220-ND .74

92 x 92 x 38 24 14.0 ~ 27.6 .280 6.72 3800 85.46 47.5 — 603-1072-ND 18.95 12.52 10.37 FFB0924VHE CR220-ND .74

48 28.0 ~ 53.0 .200 9.60 4400 100.29 52.5 — 603-1073-ND 24.12 15.93 13.20 FFB0948SHE CR220-ND .74

100 x 100 x 38 12 7.0 ~ 12.6 2.20 26.40 5000 143.09 62.0 — 603-1074-ND 31.93 21.09 17.48 FFB1012EHE — —

1 12 7.0 ~ 13.8 .230 2.76 2500 82.67 38.5 — 603-1075-ND 14.52 11.42 9.57 AFB1212H CR210-ND 1.67

120 x 120 x 25.4 12 7.0 ~ 13.8 .330 3.96 2800 95.14 41.5 — 603-1076-ND 17.49 11.55 9.57 AFB1212HH CR210-ND 1.67

24 14.0 ~ 27.6 .280 6.72 3400 113.11 46.5 — 603-1077-ND 18.29 12.08 10.01 AFB1224SH CR210-ND 1.67

12 4.0 ~ 13.2 .600 7.20 3200 129.96 48.0 Tac 603-1078-ND 20.27 13.39 11.10 AFB1212VHE-F00 CR210-ND 1.67

12 7.0 ~ 13.2 1.00 12.00 3200 151.85 53.0 — 603-1080-ND 31.93 21.09 17.48 FFB1212VHE CR210-ND 1.67

12 7.0 ~ 13.2 1.50 18.00 3600 170.92 56.5 Tac 603-1081-ND 32.60 21.53 17.84 FFB1212SHE-F00 CR210-ND 1.67

12 4.0 ~ 13.2 1.05 12.60 3700 151.85 53.0 — 603-1082-ND 16.28 12.58 10.73 AFB1212SHE CR210-ND 1.67

12 7.0 ~ 13.2 2.00 24.00 4000 190.00 59.0 Tac 603-1083-ND 32.60 21.53 17.84 FFB1212EHE-F00 CR210-ND 1.67

120 x 120 x 38 12 8.0 ~ 13.2 2.70 32.40 4800 217.80 64.0 — 603-1084-ND 42.00 27.74 22.99 PFB1212GHE CR210-ND 1.67

24 7.0 ~ 27.6 .240 5.76 2600 105.94 41.0 — 603-1085-ND 16.94 13.09 10.98 AFB1224HE CR210-ND 1.67

24 7.0 ~ 27.6 .380 9.12 3200 129.96 48.0 — 603-1086-ND 16.94 13.09 10.98 AFB1224VHE CR210-ND 1.67

24 14.0 ~ 26.4 1.00 24.00 4000 190.00 59.0 — 603-1088-ND 33.52 22.14 18.35 FFB1224EHE CR210-ND 1.67

48 28.0 ~ 53.0 .500 24.00 4000 190.00 59.0 Tac 603-1089-ND 38.29 25.29 20.96 FFB1248EHE-F00 CR210-ND 1.67

48 32.0 ~ 80.0 .910 43.68 5300 223.22 68.0 — 603-1090-ND 54.00 45.00 40.50 FHB1248UHE CR210-ND 1.67

120 x 120 x 50.8

12 7.0 ~ 13.2 2.82 33.84 3400 184.45 65.0 — 603-1091-ND 63.60 42.00 34.80 GFB1212VHG CR210-ND 1.67

2 24 14.0 ~ 26.4 1.80 43.20 3700 203.41 67.6 — 603-1092-ND 63.60 42.00 34.80 GFB1224SHG CR210-ND 1.67

120 x 120 x 76.2 12 7.0 ~ 13.2 2.65 31.80 3550 220.29 59.0 — 603-1093-ND 43.70 35.65 31.63 GFB1212VHW CR210-ND 1.67

12 7.0 ~ 13.2 1.85 22.20 3450 180.00 56.5 — 603-1094-ND 31.20 25.60 22.40 FFB1312SHE CR200-ND 2.43

1 127 x 127 x 38 12 8.5 ~ 13.2 2.74 32.88 3850 200.02 59.5 — 603-1095-ND 31.20 25.60 22.40 FFB1312EHE CR200-ND 2.43

24 14.0 ~ 26.4 .840 20.16 3450 180.00 56.5 — 603-1096-ND 45.71 30.19 25.02 FFB1324SHE-B CR200-ND 2.43

140 x 140 x 50.8 48 28.0 ~ 53.0 .770 36.96 3600 273.09 61.7 Tac 603-1097-ND 74.86 49.44 40.97 FFB1448SHG-F00 CR196-ND 2.93

12 6.0 ~ 14.0 .980 11.76 3000 202.54 52.0 — 603-1126-ND 51.57 42.98 38.68 AFB1512H-A CR196-ND 2.93

172 x 150 x 25.4

12 6.0 ~ 14.0 1.17 14.04 3200 214.85 53.5 — 603-1099-ND 51.57 42.98 38.68 AFB1512HH-A CR196-ND 2.93

3 24 12.0 ~ 30.0 .310 7.44 2400 160.77 46.0 — 603-1125-ND 75.92 50.14 41.55 AFB1524L-A CR196-ND 2.93

48 32.0 ~ 80.0 .520 24.96 4000 271.05 61.0 — 603-1101-ND 108.73 71.81 59.50 AHB1548EH CR196-ND 2.93

24 12.0 ~ 28.0 .560 13.44 3350 251.79 55.0 — 603-1102-ND 68.90 45.50 37.70 EFB1524HG CR196-ND 2.93

172 x 150 x 50.8 24 12.0 ~ 28.0 .970 23.28 4000 302.29 60.0 — 603-1103-ND 49.40 40.30 35.75 EFB1524VHG CR196-ND 2.93

48 24.0 ~ 60.0 .310 14.88 3350 251.79 55.0 Tac 603-1104-ND 72.21 47.69 39.52 EFB1548HG-F00 CR196-ND 2.93

12 6.0 ~ 14.0 .980 11.76 3000 202.54 52.0 — 603-1105-ND 61.79 50.41 44.72 AFB1712H-A CR206-ND 2.75

172 x 25.4

12 6.0 ~ 14.0 1.17 14.04 3200 214.85 53.5 — 603-1106-ND 86.18 56.91 47.16 AFB1712HH-A CR206-ND 2.75

24 12.0 ~ 30.0 .310 7.44 2400 160.77 46.0 — 603-1107-ND 61.79 50.41 44.72 AFB1724L-A CR206-ND 2.75

4 48 24.0 ~ 60.0 .270 12.96 3000 202.54 52.0 — 603-1127-ND 90.26 59.61 49.39 AFB1748H-A CR206-ND 2.75

12 8.0 ~ 14.0 1.79 21.48 3700 279.69 55.0 — 603-1109-ND 66.25 43.75 36.25 EFB1712HHG CR206-ND 2.75

172 x 50.8 24 12.0 ~ 28.0 1.17 28.08 4300 325.00 59.0 Tac 603-1130-ND NEW! 48.56 40.17 36.10 EFB1724SHG-F00 CR206-ND 2.75

48 26.0 ~ 54.0 1.90 91.20 4600 432.77 72.0 — 603-1111-ND 52.20 43.50 39.15 FFB1748VHG CR206-ND 2.75

Blowers

5 30 x 30 x 10 12 7.0 ~ 13.2 .070 0.84 7500 1.45 29.0 — 603-1112-ND 11.48 8.83 7.40 BFB0312HA — —

40 x 40 x 10 5 4.0 ~ 6.0 .220 1.10 8500 3.00 34.5 — 603-1113-ND 14.84 9.80 8.12 BFB0405HHA-A — —

12 10.0 ~ 13.8 .160 1.92 5500 3.88 38.0 Locked Rotor 603-1114-ND 18.15 11.99 9.94 BFB0512H-R00 — —

51 x 51 x 15 12 10.0 ~ 13.8 .210 2.52 6500 4.59 45.0 Tac 603-1115-ND 18.15 11.99 9.94 BFB0512HH-F00 — —

24 14.0 ~ 27.6 .110 2.64 6500 4.59 45.0 — 603-1116-ND 17.49 11.55 9.57 BFB0524HH — —

60 x 60 x 25 12 5.0 ~ 13.8 .180 2.16 3200 6.71 34.0 — 603-1117-ND 12.60 9.69 8.12 BFB0612H — —

6 75 x 75 x 30 12 7.0 ~ 13.8 .220 2.64 2900 11.30 38.0 — 603-1118-ND 20.67 13.65 11.31 BFB0712H — —

97 x 94 x 33

12 4.0 ~ 13.8 .800 9.60 3600 25.43 52.0 Tac 603-1119-ND 24.38 16.10 13.34 BFB1012H-F00 — —

24 7.0 ~ 27.6 .400 9.60 3600 25.43 52.0 Tac 603-1120-ND 24.38 16.10 13.34 BFB1024H-F00 — —

120 x 120 x 32

12 4.0 ~ 13.8 .400 4.80 2100 24.70 47.0 Tac 603-1121-ND 26.63 17.59 14.58 BFB1212L-F00 — —

48 28.0 ~ 56.0 .220 10.56 2800 35.31 54.0 — 603-1122-ND 20.60 16.79 14.42 BFB1248HH — —

159 x 165 x 40

12 7.0 ~ 13.2 1.43 17.16 2200 61.80 56.5 — 603-1123-ND 66.25 43.75 36.25 BFB1612H — —

24 14.0 ~ 26.4 .560 13.44 2000 55.09 54.5 — 603-1124-ND 66.25 43.75 36.25 BFB1624M — —

CN081 Section Reference Index - Digi-Keydkc3.digikey.com/PDF/CN081/SectL.pdfAll Prices are in US...

Documents

Transcript of CN081 Section Reference Index - Digi-Keydkc3.digikey.com/PDF/CN081/SectL.pdfAll Prices are in US...