CMW WCDMA step by step - file.yizimg.com
of 25
/25
Embed Size (px)
Transcript of CMW WCDMA step by step - file.yizimg.com
Microsoft Word - CMW WCDMA step by step.docCMW WCDMA step by step
WCDMA step by
step...........................................................................................1
1. ....................................................................................................2 2. ....................................................................................................6 3. ........................................................................................................7
1. WCDMA“SIGNAL” WCDMA signaling WCDMA
RMCWCDMA RMC 12.2kbps RMC TS 34.121 Annex C2.1
WCDMA
Call EstablishedWCDMA WCDMA Multi-Evaluation scenario Combined with WCDMA sig1 Standard alone Go to
2.
3.1
Power Class 1 Power Class 2 Power Class 3 Power Class 3bis Power Class 4 Operating
Band Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Band I +33 +1/-3 +27 +1/-3 +24 +1/-3 +23 +2/-2 +21 +2/-2 Band II - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band III - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band IV - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band V - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VIII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band IX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band X - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIV - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XXI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2
1WCDMA RMC 2Multi EvaluationWCDMA Sig.Conifg Alg Alg2_1dBTPC ALL 1 Execute 3 ON/OFF UE power
3.2 1Multi EvaluationWCDMA Sig.Conifg TPC ALL 1 Execute Physical DL SettingsOutput Power-106dBm
2 TX Measurement Current
3.3 UE TPC
TPC_cmd Transmitter power control range (all units are in dB)
1 dB step size 2 dB step size 3 dB step size Lower Upper Lower Upper Lower Upper
+1 +0,5 +1,5 +1 +3 +1,5 +4,5 0 −0,5 +0,5 −0,5 +0,5 −0,5 +0,5 −1 −0,5 −1,5 −1 −3 −1,5 −4,5
TPC_cmd group Transmitter power control range after 10 equal TPC_cmd group
(all units are in dB)
Transmitter power control range after 7
equal TPC_cmd groups
(all units are in dB) 1 dB step size 2 dB step size 3 dB step size
Lower Upper Lower Upper Lower Upper +1 +8 +12 +16 +24 +16 +26 0 −1 +1 −1 +1 −1 +1 −1 −8 −12 −16 −24 −16 −26
0,0,0,0,+1 +6 +14 N/A N/A N/A N/A 0,0,0,0,−1 −6 −14 N/A N/A N/A N/A
A B C D
-10dBm
34.121 5.4.2.4
1WCDMA RMC 2WCDMA TPC Meas Trigger TPC Trigger 3 TPC Setup ABCEF ON/OFF
Marker slot
-49dBm
3.5 OBW 99% 5MHz
1WCDMA RMC 2 TPC all 1, UE SEM OBW
3.6 SEM 2.5MHz 12.5MHz band 34.121 5.9.3
Minimum requirement (Note 2) f in MHz (Note 1)
Relative requirement Absolute requirement
−
3.5 - 7.5 dBc MHz f
−
7.5 - 8.5 dBc MHz f
−
⋅−− 5.71039 -55.8 dBm 1 MHz (Note 4)
8.5 - 12.5 MHz -49 dBc -55.8 dBm 1 MHz (Note 4)
Note 1: f is the separation between the carrier frequency and the centre of the measurement bandwidth.
Note 2: The minimum requirement is calculated from the relative requirement or the absolute requirement, whichever is the higher power.
Note 3: The first and last measurement position with a 30 kHz filter is at f equals to 2.515 MHz and 3.485 MHz.
Note 4: The first and last measurement position with a 1 MHz filter is at f equals to 4 MHz and 12 MHz.
1WCDMA RMC 2 TPC all 1, UE SEM SEM limits Configure
3.7 ACLR
Power Class UE channel ACLR limit
3 +5 MHz or −5 MHz 33 dB 3 +10 MHz or −10 MHz 43 dB 4 +5 MHz or −5 MHz 33 dB 4 +10 MHz or −10 MHz 43 dB
1WCDMA RMC 2 TPC all 1, UE ACLR ALCR limits Configure
3.8 EVM EVM
1UE 2UE -18dBm EVM-17.5%
Parameter Level / Status Unit Output power ≥ −20 dBm Operating conditions Normal conditions Power control step size 1 dB
1 1WCDMA RMC
2 TPC all 1, UE EVM EVM limits Configure
2 1WCDMA RMC 2 TPC Closed Loop target-18dBm Execute 3 EVM EVM
3.9 PCDE RMC 384Kbps -18dBm CMW KS410
1 RMC 384Kbps RMC12.2Kbps disconnect RMC RMC RMC 2 SF 4WCDMA sig TPC ALL 1 UE closed loop target-18dBm
4 CDP display Select Trace CD Monitor CDE
PCDE -14dB
TPC TPC 1 RMC UE TPC
2 TPC UE
3 TPC UE
UE power Phase Discontinuity Repetition Single shotStatistic Count Modulation 1Measurement Length 46Trigger SourceWCDMA TPC Trigger
ON TPC PhaseDisc DownPrecondition MaxPower Alg2_1dB Excute
Phase Discontinuity EVM Assign View
UE
1-20dBm EVM 17.5% 2 0.1ppm+10Hz 3 36 36 66 36 66
4.
4.1 Reference Sensitivity Level RMC 12.2kbps -106dBm
ON BER BER BER 0.001 limit BER Config
4.2 Maximum Input Level
1. ....................................................................................................2 2. ....................................................................................................6 3. ........................................................................................................7
1. WCDMA“SIGNAL” WCDMA signaling WCDMA
RMCWCDMA RMC 12.2kbps RMC TS 34.121 Annex C2.1
WCDMA
Call EstablishedWCDMA WCDMA Multi-Evaluation scenario Combined with WCDMA sig1 Standard alone Go to
2.
3.1
Power Class 1 Power Class 2 Power Class 3 Power Class 3bis Power Class 4 Operating
Band Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Power (dBm)
Tol (dB)
Band I +33 +1/-3 +27 +1/-3 +24 +1/-3 +23 +2/-2 +21 +2/-2 Band II - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band III - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band IV - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band V - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band VIII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band IX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band X - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIII - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIV - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XIX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XX - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2 Band XXI - - - - +24 +1/-3 +23 +2/-2 +21 +2/-2
1WCDMA RMC 2Multi EvaluationWCDMA Sig.Conifg Alg Alg2_1dBTPC ALL 1 Execute 3 ON/OFF UE power
3.2 1Multi EvaluationWCDMA Sig.Conifg TPC ALL 1 Execute Physical DL SettingsOutput Power-106dBm
2 TX Measurement Current
3.3 UE TPC
TPC_cmd Transmitter power control range (all units are in dB)
1 dB step size 2 dB step size 3 dB step size Lower Upper Lower Upper Lower Upper
+1 +0,5 +1,5 +1 +3 +1,5 +4,5 0 −0,5 +0,5 −0,5 +0,5 −0,5 +0,5 −1 −0,5 −1,5 −1 −3 −1,5 −4,5
TPC_cmd group Transmitter power control range after 10 equal TPC_cmd group
(all units are in dB)
Transmitter power control range after 7
equal TPC_cmd groups
(all units are in dB) 1 dB step size 2 dB step size 3 dB step size
Lower Upper Lower Upper Lower Upper +1 +8 +12 +16 +24 +16 +26 0 −1 +1 −1 +1 −1 +1 −1 −8 −12 −16 −24 −16 −26
0,0,0,0,+1 +6 +14 N/A N/A N/A N/A 0,0,0,0,−1 −6 −14 N/A N/A N/A N/A
A B C D
-10dBm
34.121 5.4.2.4
1WCDMA RMC 2WCDMA TPC Meas Trigger TPC Trigger 3 TPC Setup ABCEF ON/OFF
Marker slot
-49dBm
3.5 OBW 99% 5MHz
1WCDMA RMC 2 TPC all 1, UE SEM OBW
3.6 SEM 2.5MHz 12.5MHz band 34.121 5.9.3
Minimum requirement (Note 2) f in MHz (Note 1)
Relative requirement Absolute requirement
−
3.5 - 7.5 dBc MHz f
−
7.5 - 8.5 dBc MHz f
−
⋅−− 5.71039 -55.8 dBm 1 MHz (Note 4)
8.5 - 12.5 MHz -49 dBc -55.8 dBm 1 MHz (Note 4)
Note 1: f is the separation between the carrier frequency and the centre of the measurement bandwidth.
Note 2: The minimum requirement is calculated from the relative requirement or the absolute requirement, whichever is the higher power.
Note 3: The first and last measurement position with a 30 kHz filter is at f equals to 2.515 MHz and 3.485 MHz.
Note 4: The first and last measurement position with a 1 MHz filter is at f equals to 4 MHz and 12 MHz.
1WCDMA RMC 2 TPC all 1, UE SEM SEM limits Configure
3.7 ACLR
Power Class UE channel ACLR limit
3 +5 MHz or −5 MHz 33 dB 3 +10 MHz or −10 MHz 43 dB 4 +5 MHz or −5 MHz 33 dB 4 +10 MHz or −10 MHz 43 dB
1WCDMA RMC 2 TPC all 1, UE ACLR ALCR limits Configure
3.8 EVM EVM
1UE 2UE -18dBm EVM-17.5%
Parameter Level / Status Unit Output power ≥ −20 dBm Operating conditions Normal conditions Power control step size 1 dB
1 1WCDMA RMC
2 TPC all 1, UE EVM EVM limits Configure
2 1WCDMA RMC 2 TPC Closed Loop target-18dBm Execute 3 EVM EVM
3.9 PCDE RMC 384Kbps -18dBm CMW KS410
1 RMC 384Kbps RMC12.2Kbps disconnect RMC RMC RMC 2 SF 4WCDMA sig TPC ALL 1 UE closed loop target-18dBm
4 CDP display Select Trace CD Monitor CDE
PCDE -14dB
TPC TPC 1 RMC UE TPC
2 TPC UE
3 TPC UE
UE power Phase Discontinuity Repetition Single shotStatistic Count Modulation 1Measurement Length 46Trigger SourceWCDMA TPC Trigger
ON TPC PhaseDisc DownPrecondition MaxPower Alg2_1dB Excute
Phase Discontinuity EVM Assign View
UE
1-20dBm EVM 17.5% 2 0.1ppm+10Hz 3 36 36 66 36 66
4.
4.1 Reference Sensitivity Level RMC 12.2kbps -106dBm
ON BER BER BER 0.001 limit BER Config
4.2 Maximum Input Level