EUROPE’S LARGEST SELECTION OF TEST & MEASUREMENT EQUIPMENT FOR HIRE

WHY BUY

WHEN YOU CAN HIRE

Nationwide Low Call0333 6000 600

INLEC.COM

CMC 356

The Universal Relay Test Set and Commissioning Tool

- The Workhorse

CMC 356 – Universal Relay Testing and Commissioning

Low level outputs 1 - 6and 7 - 12 (with option LLO-2)(±10 VPK)

2 Ethernet interfaces

For PC control or CMControl and IEC 61850 GOOSE and Sampled Values

CMC 356 – The Workhorse

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.

The CMC 356 is the first choice for applications requiring the highest versatility, amplitude and power. Commissioning engineers will particularly appreciate its ability to perform wiring and plausibil-ity checks of current transformers, by using primary injection of high currents from the test set.

Six current outputs:

6 x 32 A / 6 x 430 VA or

3 x 64 A / 3 x 860 VA or

1 x 128 A / 1 x 1000 VA

DC supply (0 ... 264 V)

Four voltage outputs:

4 x 300 V or 1 x 600 V

Generator combination socket

3 x 300 V and 3 x 25 A

2 counter inputs

Interface for CMGPS or CMIRIG-B

4 binary outputs (transistor)

CMControl-6 Front Panel Control (option)

The analog test signals are generated digitally using DSP technology. This, in combination with the use of additional error correction algorithms, results in accurate testing signals even at small amplitudes.

The six current and four voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs are overload and short-circuit proof and are protected against external high-voltage transient signals and over-temperature.

The integrated network interface supports compre-hensive testing in the IEC 61850 environments using optional GOOSE simulation and subscription and Sampled Values simulation functionality.

Up to 12 independent channels with low-level signals are available at the back of the test set, which can be used to test relays which have a low-level input facility or to control external amplifier units.

By utilizing the EnerLyzer software option, the ten binary inputs of a CMC 356 equipped with the ELT-1 hardware option alternatively work as analog measurement inputs. The unit then can also be used as a multifunctional multimeter and transient recorder.

Besides its operation with the powerful Test Universe software running on a PC, the CMC 356 can also manually be controlled with the highly flexible CMControl unit.

CMC 356 – Universal Relay Testing and Commissioning

For detailed technical data see product catalog or literature download section at the OMICRON website.

10 x multifunctional inputs, binary (dry/wet)

Option ELT-1: analog measurement, EnerLyzer TM

Option ELT-1:

DC measuring inputs

(0 ... 10 V and 0 ... 20 mA)

4 x binary outputs

16.6 kg (36.6 lbs)

450 x 145 x 390 mm (17.7 x 5.7 x 15.4")

CMC 356: 6 Phase Current + 4 Phase Voltage Test Set and Commissioning Tool

Protection Relay Test SetHigh-burden electromechanical relays Static relaysNumerical relaysIEC 61850 IEDs (GOOSE and Sampled Values)Relay panels End-to-End testing with GPS or IRIG-BBusbar protection (up to 22 signal generators)

Power System SimulatorTransient fault simulationPower swingCT saturation simulation CB simulationRogowski coil simulationCompensated networkTransient playback (COMTRADE, PL4 (EMTP), ...)

Programmable Voltage and Current Source

Production quality assuranceManufacturer of substation equipmentResearch & development

Universal Tool for Substation Commissioning

Checking SCADA annunciationsBurden measurementCT/VT polarity checkerWiring checkerPlausibility check for CT/VT with primary injection

Portable 10-Channel Measurement Device 1

Transient recording (trigger: binary, PQ, GPS)Multimeter for: I, V, f, S, P, Q, cos ...Trend recording for: I, V, f, S, P, QHarmonics analysis

1 With ELT-1 hardware option and EnerLyzerTM software option

CMC 356

Key Features Very powerful current sources for testing high-burden electromechanical relays

High current amplitudes for 5 A relay testing

High accuracy and versatility for testing static and numerical relays of all types

Integrated network for testing IEC 61850 IEDs

Continuous synchronized outputs with CMIRIG-B (e.g. for PMU or MU testing)

Primary injection capabilities for commissioning tasks

Test Universe software with unrivaled manual and automated testing functionality

Front panel control with the unique CMControl (option)

10-channel analog measurement and transient recording functionality (option)

Reliable and robust

Additional BenefitsOMICRON provides

Worldwide high quality technical support

Platforms for an international knowledge exchange

Training courses designed for electric power system technicians and engineers

CMC 356 Ordering Information

CMC 356 with Test Universe SoftwareVE002801 CMC 356 BasicVE002802 CMC 356 ProtectionVE002803 CMC 356 Advanced Protection

CMC 356 with CMControl (without Test Universe Software)VE002820 CMC 356 with CMControl-6

The CMControl can also be ordered as add-on together with a CMC 356 with Test Universe software or as a later upgrade.

CMC 356 Hardware OptionsVEHO2801 ELT-1 EnerLyzer and Transducer hardware option (if ordered with a new CMC 356)VEHO2802 ELT-1 EnerLyzer and Transducer hardware factory upgrade (for used CMC 356)VEHO2803 LLO-2 Additional 6 low level outputs option (if ordered with a new CMC 356VEHO2804 LLO-2 Additional 6 low level outputs factory upgrade (for used CMC 356)

AmericasOMICRON electronics Corp. USA12 Greenway Plaza, Suite 1510Houston, TX 77046, USAPhone: +1 713 830-4660 +1 800-OMICRONFax: +1 713 830-4661info@omicronusa.com

Asia-PacificOMICRON electronics Asia LimitedSuite 2006, 20/F, Tower 2The Gateway, Harbour CityKowloon, Hong Kong S.A.R.Phone: +852 3767 5500Fax: +852 3767 5400info@asia.omicron.at

Europe, Middle East, AfricaOMICRON electronics GmbHOberes Ried 16833 Klaus, AustriaPhone: +43 5523 507-0Fax: +43 5523 507-999info@omicron.at

For a complete list of available literature please visit our website.

OMICRON is an international company serving the electrical power industry with innovative testing and diagnostic solutions. The application of OMICRON products allows users to assess the condition of the primary and secondary equipment on their systems with complete confidence. Services offered in the area of consulting, commissioning, testing, diagnosis, and training make the product range complete.

Customers in more than 140 countries rely on the company’s ability to supply leading edge technology of excellent quality. Broad application knowledge and extraordinary customer support provided by offices in North America, Europe, South and East Asia, Australia, and the Middle East, together with a worldwide network of distributors and representatives, make the company a market leader in its sector.

© OMICRON L162, August 2011Subject to change without notice

Product catalog (secondary equipment)

CMControl brochure Testing Solutions for Protection Systems

The following publications provide detailed information on the products described in this brochure and their applications:

Testing Solutions for Protection Systems

Reliable and Efficient Testing for all Kinds of Protective Relays

CMControl

Front Panel Control for CMC Test Sets

Testing Solutions for Protection and Measurement Systems

PRODUCT CATALOG

YOUR 5 WAY GUARANTEE

e GUARANTEE SAME DAY DESPATCH

We understand why prompt delivery is important to you. So,if we confirm your order before 3pm, you are guaranteedsame day despatch.

r OUR PRICE GUARANTEE

Inlec guarantee you real value for money. Our price matchpolicy is simple - if you can hire the same product for lesselsewhere, we guarantee to match that price and reduce it by a further 10% of the difference - and still deliver ourindustry leading technical and customer support.

For full details check our price-match guarantee online

t TOP QUALITY GUARANTEED

All equipment is thoroughly checked prior to dispatch toensure you receive it in full, safe working order. Yourshipment will be securely packed and include manufacturer'sinstructions, accessories or consumables and a validcalibration certificate where appropriate. In addition, Inlecoffer a 24 hour replacement service if you decide theequipment is not suitable for your application*.

u FRIENDLY, KNOWLEDGEABLE ADVICE GUARANTEED

Inlec are happy to provide you with free advice, fromanunbeatable team of experienced, knowledgeable andfriendly engineers and hire experts.

i YOUR GUARANTEE OF THE BEST CUSTOMER SERVICE

Throughout your hire we will work hard to ensure you enjoythe very best in support and service from Inlec. We guaranteeyou won't find better service anywhere in the industry.

*subject to availability and conditions

OUR COMMITMENT TO YOU

A wealth of knowledge and experience.

You can take advantage of expert advice to ensure you get thebest, most appropriate and cost effective equipment for thejob. We supply a wide variety of industries, so if there isanother way to do the job or save you time and money we’llpass on the benefit of our experience for free.

Honest advice, just a phone call away.

If we don’t have a particular item, rather than hiring yousomething that won’t do the job, we would rather direct youto an alternative supplier. You will always be provided with fullinstructions and if you still need help, call our technical teamon Nationwide Low Call 0333 6000 600. Our aim is to save youtime, frustration and money.

Top quality equipment from major manufacturers.

With Inlec you’ll get the most accurate, reliable and well-maintained equipment available. Prices are regularlyreviewed to ensure you always enjoy the best value for money.We have made a significant investment in test equipment sowe ensure that it’s well packed to minimise damage anddelay.

We really do listen to you.

You won’t waste your time contacting Inlec. Every request forequipment is logged and carefully considered. Listening toour customers helps keep our product range up to date andrelevant. If you are unhappy about any aspect of our serviceplease let us know so we can put it right.

INLEC, supporting you to deliver a worldclass service, every day, in every sector ...

Nationwide Low Call 0333 6000 600Online: www.inlec.com

Inlec UK Ellerbeck Way, Stokesley Business Park, Stokesley N Yorkshire TS9 5JZ United Kingdom CERT. NO. GB93/1773LAB NO. 0535

Europe's leading Test Equipment Hire Specialist