Clue Machinery - August 2015 Issue

24
MACHINERY AUGUST 2015 Volume 30 Number 8 Phone: 905-528-7765 Fax: 905-917-0222 www.cluemachines.com email: [email protected] • Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant • High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant

description

Metal Cutting & Fabricating Machinery. New & Used Machinery, Auctions and more.

Transcript of Clue Machinery - August 2015 Issue

Page 1: Clue Machinery - August 2015 Issue

M A C H I N E R Y

AUGUST 2015Volume 30 Number 8Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.comemail: [email protected]

• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant

• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant

Page 2: Clue Machinery - August 2015 Issue

Page 2 Clue August, 2015

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Page 3: Clue Machinery - August 2015 Issue

Page 8 / Steel Marketplace / JULY 2007

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

27.5 TON, TRUMPF TC500R BOSCH CNC,TURRET PUNCH, 18 STATION ROTATION, LIFT-

MASTER, MFG:2000, OUR STOCK #10284

175 TON X 12’, ACCURPRESS ADVANTAGE 717512, PRESS BRAKE, ETS3000 3-AXIS,

MFG: 2004, STOCK #10273

TRUMPF TRULASER 3030 5 KW, LASER, 5’ X 10’ , MFG:2012 10000 LASER ON &

6000 BEAM ON, STOCK #10278

TRUMPF TRULASER 3040, LASER,4000 WATT, 80” X 160”, DUAL PALLET,

MFG:2011, STOCK #10260

33 TON, AMADA, PEGA 345Q, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1993 STOCK #10283

143 Ton, AMADA, HDS-1303NT,PRESS BRAKE, AMNC-PC 8-AXIS,

MFG:2005, STOCK #10245

AMADA LC3015F1NT, LASER, 4000 WATT,5’ X 10’, AMS-3015 10 SHELF LOAD/UNLOAD

SYSTEM, MFG:2009 STOCK #10187

AMADA, LC1212A3XL, LASER, 2000 WATT,4’ X 8’, 17,000 HOURS, NEW TURBO BLOWER,

MFG:2004, STOCK #10175

4000 WATT AMADA FOM2 3015NT LASER W/AUTOMATIC NOZZLE CHANGER, 23,300 HRS.

MFG: 2012, STOCK #10297

AMADA, PULSAR LC2415XLA3, LASER,2000 WATT, 61” X 198” W/REPO,

MFG: 2000, STOCK #10305

4000 WATT AMADA GEMINI F0-3015NT CNC LASER, NEW TURBO BLOWER, 24K HRS,

MFG: 2006, STOCK #10301

3500 WATT TANAKA MODEL:TF-3500B,LASER, 8’ X 95’, FANUC 16L,

MFG:1996, STOCK #10287

Clue August, 2015 Page 3

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Page 4: Clue Machinery - August 2015 Issue

PAGE 4 CLUE, August 2015

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl

5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling

BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i

BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op. Manual Gauge

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety

50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen

50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains

70 Ton x 10’ ALLSTEEL, CNC, Automec, Light curtains

70 Ton x 10’ ALLSTEEL, Hyd.

75 Ton x 10’ “NEW” ACCURPRESS, CNC

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis touch screen

11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System 5000

120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge

130 Ton x 10’ “NEW” ACCURPRESS, CNC

130 Ton x 12’ ACCURPRESS, 2-Axis

130 Ton x 12’ ACCURPRESS, 713012 (1997), Upgraded ETC3000 ctrl

130 Ton x 14’ ACCURPRESS, ETS3000 (2005)

138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis touch screen

140 Ton x 10’ WYSONG, CNC, Automec

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid CNC

200 Ton x 12’ “NEW” ACCURPRESS, CNC

235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded

250 Ton x 12’ “NEW” ACCURPRESS, CNC

DRILLS, COLUMN & BENCH1-3/8"cap “New” DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL3’ arm “New” TONE FAN, RD-900

3’ Arm SUNLIKE, 1500rpm, w/work table

9’arm SHENYANG, Box table

GRINDERS, CYLINDRICAL5"x 13" JONES & SHIPMAN, 1212E

GRINDERS, SURFACE, RECIPROC6" x 18" “New” KENT, KGS-200

8"x 20" YOUIL (1998), fully-auto, Electro-Mag Chk

12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB

20"x 13’ SNOW, Hydraulic

IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle

LASERS2600 Watt TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet

3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’

3200 Watt TRUMPF, Lasercell, 5-Axis

4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’

LATHES, ENGINE12" x 40" “New” MORTON, F1900-AEG (2001), Single Phase

18" x 60" “New” POWERTURN, 460

63" x 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!

OKUMA, Space Turn LB3000 EX/BB/MY (2012), Live mill, Y-axis, Tooling, OSP-P200LA

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap

MORI SEIKI, SL150S (1997)

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y Axis Milling, 10"Chk, Live holders

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill cap

OKUMA, LT25M (2001), Twin spindle, Twin turret, Chip conveyor, 12’ LNS Barfeeder

MORI SEIKI, NL3000MC/700 (2010), MSX850 Ctrl, C-Axis, Live mill cap, 15" 3-Jaw

HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore

HARDINGE, CHNC II SP, Fanuc 14"Sw., 12.5"ctrs, 5000rpm, 10hp

ROMI, M17 (2007), 17"x 43", Fanuc 21i, 8"Chk

HYUNDAI, SKT21 (2006), Fanuc Control, 21.7"Swing, 16.1" turn length

TOOLMEX, TUR560MN-2000 (2012), 22"x 78.7", Siemens 840D, 16" Chk.

TOOLMEX, TUR630AMN-3000 (2008), 24.8"x 118", Siemens 840D, 16” Chk.

MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin Pallet

MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000

HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!

MACHINING CTRS, VERTLAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC Control

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpm

MILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 control

LEADWELL, MCV-1650 (2005), X-65" Y-33" Z-28", Fanuc 18iMB

DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5", Fanuc O-MC

MILLS, VERTICAL9" x 49" "NEW"MAGNUM-CUT, VM-2V, 3hp

10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp

12"x 51" TOS, FNK2R (2003), DRO, P/F Allways, Vari-Speed

12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S

NOTCHING MACHINES5/32" x 8-7/8" x 8-7/8" (NEW) BOSCHERT, Hydraulic

1/4"x 8.6"x 8.6" EUROMAC, Hyd. Notcher w/Bending Attachment

PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II

PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PRESSES, STRAIGHT SIDE800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like New!

PUNCHES, SINGLE STATION25 Ton PIERCE-ALL

60 Ton FABMASTER (2011), Like new

PUNCHES, TURRET22 Ton AMADA, Vipros 255 (2000)

25 Ton TRUMPF, TC500/1300, 50"x 100"

30 Ton EUROMAC, CX1250/30 (2000), CNC

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I

ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout

ROLLS, PLATE BENDING1” x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch

SANDERS24" TIMESAVER, Series 2100 (2008), Wet

SAWS, BAND, HORIZONTAL10"x 15" "NEW" ACRA, Speeder FHBS-250V

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz, PLC Control

12"x 14" RAM, Semi-Auto

SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, Hyd.

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic

1/4"x 10’ HACO, TS3006 (2001)

3/8"x 8’ ACCURSHEAR (1998), Hydraulic

MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65

Barfeeds LNS, Servo S2 & S3, Late models, w/Remote pendant, Excellent

Magazine Barfeeder 4’ SAMECA, MBF1000 (1998), Auto Loading

Gundrill 3/4" x 30" ELDORADO

Honing Machine SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet

Insertion Press 8 Ton, HAEGER

Insertion Press 8 Ton, PEMSERTER, Series 2000 (2002), PLC control

Sinker EDM AGIETRON, Advance 2, X-11.8" Y-9.8" Z-9.8"

Spot Welder 20 KVA, SIP

Wire EDM, CNC AGIECUT, Classic 2S (2002), X-13.7" Y-9.8" Z-10"

Wire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW

Page 4 Clue August, 2015

Page 5: Clue Machinery - August 2015 Issue

WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

NEW ACCURPRESS MODELSCNC PRESS BRAKES

Mori Seiki, NL-2500Y/700 & NL-3000Y/1250, 2006/07, Turning, Mill/Drill Center

OKUMA, LT25M, 2001, 7-Axis, Twin Spindle, Twin Turret, CNC lathe, W/ Live Milling

See Demos on the highly successful leader in precision forming Accurpress Press Brakes.

TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control

33 Ton AMADA, Vipros 358 King II,CNC Turret Punch, Fanuc 18P Control

Clue August, 2015 Page 5

Page 6: Clue Machinery - August 2015 Issue

Page 6 Clue August, 2015

Your Production Matters To Us

PROFILE ROLLS

PLATE ROLLS

PRESS BRAKES

FIBER LASER

PUNCH PRESS

PLASMA MACHINE

SHEARS

We offer innovative solutions to increase your productivity

ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234

WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048

FLEXIBLE COIL PUNCHING LINES

Quality | Service | Value | www.ferricmachinery.com

Page 7: Clue Machinery - August 2015 Issue

Clue August, 2015 Page 7

Page 8: Clue Machinery - August 2015 Issue

Page 8 Clue August, 2015

Page 9: Clue Machinery - August 2015 Issue

Clue August, 2015 Page 9

PUBLIC AUCTIONSWEBCASTS POWERED BY:

9 UPCOMING AUCTIONS!

WOrld ClASS OfferING Of A lArGe PAPer MIllA Pristine Multi-Million Dollar Event! Major Rebuild in 2012 for over $50M!

Thursday, August 13 • 1801 Mill Ave, Brainerd, Minnesota, USA 56401

Surplus to the Ongoing Operations ofdOMeSTIC CASTINGS CO. llC

Complete Green Sand Iron FoundryEarly October TBD • 275 North Queen Street, Shippensburg, Pennsylvania, USA 17257

Surplus to the Ongoing Needs ofBUlldOG TOOl & exTrUSIONS lTd.

Plastic Extrusion & Light Machining FacilityTuesday, September 15 • 221 Rayette Road, #6, Concord, ON, Canada L4K 2G1

Surplus to the Ongoing Operations ofMUeller CANAdA lTd.Complete Green Sand Iron Foundry

Tuesday, August 25 • 230 Rue Castonguay Ouest, St. Jerome, QC, Canada J7Z 5V2

Surplus Assets of a PreCISION CNC MAChINING fACIlITy

(10) CNC Machine Tools New as 2008 & More!Tuesday, August 11 • 1080 Fewster Dr., Unit 14, Mississauga, ON, Canada L4W 2T2

SMArT AUTOMATION INC.Custom Machining & Fabricating Facility

Tuesday, August 11 • 1080 Fewster Drive, Unit 14, Mississauga, ON, Canada L4W 2T2

A Multi-Million Dollar & Unprecedented 3 Day Auction Event!AUGUST 18, 19 & 20 • 100 Kellogg Lane, London, ON, Canada N5W 2T5

lONdON fACIlITyAssets of the Former

3 dAy SAle!

1M SQ. FT READy-TO-EAT CEREAL PLANT

2010

8 available huge spares & stores3 ovens available

LICENSE#: LAMPI 86-01

Page 10: Clue Machinery - August 2015 Issue

Page 10 Clue August, 2015

Page 11: Clue Machinery - August 2015 Issue

7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

USED MACHINERY

OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding

Subscribe to our mailing list

Vertical LathesBERTHIEZ

SCHIESS

BULLARD

OKUMA + HOWA

62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407940” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Horizontal Lathes“NEW”

“NEW”

MAZAK

RD&D

SAFOP

OKUMAHITACHI

MORI SEIKI

OKUMA+HOWA

SMTCL

DMG

DMG

20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157HTC2050, 8”x20”, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.CTX-310, 2006, 200mm turning diameter, 330mm swing, 51mm bar diameter, 3000 hrs, glass scales.CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.

Surface & Blanchard GrindersFAVRETTO

ARTER

SHIBAURA

Model No. MG300 2T, Siemens CNC Control, 60” x 120” x 28”, two heads, reconditioned, you won’t find a nicer grinder on the market.Rotary Surface, Horizontal Spindle, Stock No. 3827

48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684

MiscellaneousIEMCA

DANDREA

DO-ALL

AMADA

ARCHDALE

PRATT & WHITNEY

AMERICAN

PFAUTER

FLOOR PLATES

Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066

CNC facing head

Horizontal Bandsaw, Model C-916A, Stock No. 3466

Punch Grinder, Stock No. 3463

Granite Table, 150" x 150", Massive!, Stock No. 3418

Radial Drill, Stock No. 4211

Jig Grinder, Model No 20, Pratt and Whitney rotary table,

from an aerospace facility, gently used, Stock No.4215

Radial drill, 5’ arm, 17” column, 5MT spindle taper, power

quill travel, Stock No. 4237

Gear hobber, Model P900 Turbo, 36” max workpiece

diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x

9” long, Auto hob shift, swing away tailstock, change gears,

Stock No. 4253

Various sizes

Machining CentresTOS

LEADWELL

BRIDGEPORT

BOSTOMATIC

12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710

20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

32G Graphite VMC, 42K spindle, 4th axis.

Cylindrical GrindersSCHAUDT

B&S13” x 27”, Universal Heavy Duty, Stock No. 3826

10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825

Horizontal Boring MillsTOS

SCHARMANN

WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353

125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”

Milling MachinesHECKERT

DARBERT

16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686

9” x 42”, Turret Style mill, Stock No. 3458

Clue August, 2015 Page 11

Page 12: Clue Machinery - August 2015 Issue

• Reach more people faster

• Email over 5000 companies using CLUE’s highly targeted industry list

www.cluemachines.com

Call today: 905-528-7765 or email us at: [email protected]

Over 5000 Names

CLUE MACHINERY ADVERTISER ONLINE

M A C H I N E R Y

LET US MANAGE YOUR MACHINES ONLINE

Page 12 Clue August, 2015

Page 13: Clue Machinery - August 2015 Issue

STEVENS MACHINERY SALES INC.NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICES FOR OVER 38 YEARS

2 Royalcrest Road, Etobicoke (Toronto) ON, Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com email: [email protected]

SERIES 4The press is totally pneumatic providing 6 tons of force and has a 45.7 cm / 18" throat depth which provides clearance for a variety of chassis configurations.It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8" in steel, and sizes up to M12 / 1/2" in aluminum panels and circuit boards.

NEWSTANDARDFEATURES

Stroke Counter

Laser Pointer

Lockable Tool/Accessories Storage

Cabinet

1000 lbs. to 6 tons.

FEATURES AND BENEFITS

WITH AUTOMATIC FEED

® ®

tools and accessories storage.

The PENSERTER Series 4 press with automatic feed provides 6 tons of force and has a 45.7cm / 18" throat depth which provides clearance for a varietyof chasis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4".

SERIES 4 SERIES 2000This automatic fastener-installation press system incorporates upgraded operating features and expansion capabilities topromote streamlined job productivity and quality. The press offers the idealtechnology to install all types of self-clinching fasteners rapidly, reliably, and permanently in thin metal plate.

FEATURES AND BENEFITSFEATURES AND BENEFITS

®® ® ®®®

STEVENS MACHINERY SALES INC.2 Royalcrest Road, Toronto ON, M9V 2L5

Phone: (416) 798-3611 Fax: (416) 798-8439Email: [email protected] Website: www.stevensmachines.com

PLEASE CALL, VISIT OR SEE MY WEBSITE!

LARGEST INVENTORY OF USED SMALL PUNCH PRESSES IN CANADA!

NEW MIDWEST DEBURRING MACHINE – 100% MADE IN THE U.S.A!

NEW GADE CNC HYDRAULIC PRESS BRAKES – MADE IN ITALY!

NEW COASTONE SERVO-ELECTRIC CNC PRESS BRAKES!

NEW PEMSERTER INSERT PRESSES!

AIR COMPRESSOR – 5 HP, VERT. 60 GAL. 550 V-$595.00AIR COMPRESSOR – 5 HP, HOR.80 GAL, 575V -$950.00BEADER-JORG, 21 G, 6” TH, ¾ HP, 575 V -$1,950.00BRAKE-ALLSTEEL, 10 FT X 70 TON, 575 V - $12,500.00BRAKE-HACO, 12 FT X 165 TON, 6 AXIS CNC-$54,500.00 BRAKE-WYSONG,12 FT X 140 TON,2 AXIS CNC-$37,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING–37” WIDE, 1 HEAD, MIDWEST BELT-NEW - PORDEBURRING-37” WIDE, 2 HEAD, MIDWEST BELT/BELT- PORD-BUR-R-FALLS,SHEET EDGE, # 99, 115 V - $1,500.00D-BUR-R–FALLS, SHEET EDGE, # 121,115 V - $4,950.00DIE SHOES – GOOD QUANTITY, VARIOUS SIZES – P.O.R.DRILL PRESS–#3 MT,IBARMIA, G.H. PWR FDS -$3,950.00DRILL PRESS-#3 MT, IMA,GH HD,PWR FEEDS -$3,950.00DRILL-RADIAL-#3 MT, KING, 22”, 220/60/1 -$1,950.00DRILL-RADIAL-#3 MT, STANDARD, 24” ARM, -$3,950.00GRINDER-SURFACE-6”x12”,CHEVALIER,MANUAL -$2,500.00 INSERT PRESS-6 TON, PEMSERTER,#4,NEW-US.-$9,750.00INSERT PRESS-6 TON,PEMSERTER,#4AF,NEW-US$15,750.00INSERT PRESS – 6 TON, HAEGER,(AS IS) -$2,500.00 IRONWORKER-50 TON, HACO SHARK, 10 HP -$7,950.00LATHE-12” SW X 30” CC STANDARD MODERN -$3,950.00MILL-TURRET,R8,COMET, 50”x10”,3HP,575V -$3,500.00MILL-TURRET, R8, 11” x 49”,TOS,16 SPDS -$3,950.00MILL-TURRET, #40 MT, 12”x 54”, V.S, DRO -$4,950.00MILL-UNIVERSAL,DECKEL,FP2LB,3HP,550 VOLT-$7,950.00NOTCHER UNIT – C/W: 2 NOTCHERS, AIR/OIL -$3,750.00PANTOGRAPH, DECKEL, # G1L, 2D, 110 VOLT -$1,500.00PRESSES-KICK, 5 TON, ROPER 58,WHITNEY 68-$1,350.00PRESS - ARBOR– 3 TON, GREENERD, 6” TH. -$350.00PRESS – 1 TON, DENISON, HYDRAULIC, 110 V-$1,250.00PRESS – 2 TON, ALCECO, ¼” ST, 110 VOLT -$2,150.00PRESS – 2 TON, ALVA ALLEN, ¾” ST, 110 V -$2,150.00PRESS – 2 TON, BENCHMASTER, 1”ST, 110 V -$1,850.00PRESS – 3.5 TON, ALCECO, 12” TH, 110 V -$2,500.00PRESS – 4 TON, ALCECO, 1-1/4” ST, (8) -$2,250.00PRESS – 4 TON, AZIMUTH, 9”SH., 110 VOLT -$2,950.00

PRESS – 4.5 TON, FAMCO, 1-1/2” ST, (2) V-$2,150.00PRESS – 5 TON, ALVA ALLAN, 1-1/4” ST,(4) -$2,250.00PRESS – 5 TON, BENCHMASTER, 1” ST,,110 V -$2,250.00PRESS – 5 TON, ROUSSELLE, 1-1/4” ST, 110V-$2,450.00PRESS – 6 TON, AZIMUTH 1-1/4” ST, 575 V -$2,950.00PRESS – 6 TON, AZIMUTH, 1-1/4” ST, 110 V -$2,950.00PRESS – 10 TON, ROUSSELLE, 2” ST, 110 V -$2,950.00PRESS – 15 TON, ROUSSELLE, 2” ST, 110 V -$2,500.00PRESS – 15 TON, ROUSSELLE,2” ST, 18” TH -$3,500.00PRESS – 20 TON, BLOW, 2” ST, 1 HP, 575 V -$2,850.00PRESS – 25 TON, ROUSSELLE, 3” ST,AIR/MECH-$4,250.00PRESS – 33 TON, ALCECO, 2-1/2” ST, 575 V -$4,950.00PRESS,- 55 TON, BLOW, 4” ST, 5 HP, 550 V -$5,500.00ROLLING MILL, IRM, 2 HIGH, 6” W X 4” OD -$35,950.00ROLLS – PINCH, 36” X 22 G, 2” DIA, MANUAL - $750.00SAND BLAST CABINET, EMPIRE,S-20, 110 VOLT - $850.00SAND BLAST CABINET, EMPIRE, PF-3648 SRB-4-$3,950.00SANDER, STROKE, PROGRESS,8 FT,5 HP,550 V -$2,500.00SAW – ROLL-IN, E.R.MAIER, 10” X 12”,115 v-$2,995.00SAW–DBLE MITRE, PISTORIUS, 2 X 12” BLDES -$1,500.00SAW – VERT BAND, 20” TH, STARTRITE, VS -$3,950.00SAW – VERT BAND, 20”TH, T JAW, VS,WELDER -$3,950.00SHEAR – 48” X 16 G, GENERAL, FOOT, -$1,750.00SHEAR – 54” X 16 G, BARTH, FOOT, 19” GAP -$3,250.00SHEAR – 54” X 16 G, B & B, AIR, 19” GAP -$4,950.00SWAGGER-TORRINGTON,ROTARY,7/8”TUBE, 3 HP -$8,750.00TUBE BENDER-BLUE BOY, HORIZ, 3”, TOOLING -$7,500.00TUBE BENDER-DI-ACRO, # 2 MANUAL, TOOLS - $1,450.00TUBE BENDER-DI-ACRO STYLE, #2 MANUAL - $1,450.00TUBE CUT-OFF-CONTINENTAL, #6A,7-1/2” OD -$12,500.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – DURANT,1,000 LB, ½ HP,110 V - $1,250.00UNCOILER – MANUAL,5,000 LB, 24”W X 60”OD -$1,000.00WELDER – SPOT, 10 KVA, WELDOMATIC,12” TH -$2,950.00WELDER – SPOT, 25 KVA WELDOMATIC,7-1/2”TH-$4,500.00WELDER – PROJECTION,100 KVA,24” TH, 575 V-$5,950.00WELDER – PROJECTION, 75 KVA, 12” TH, 460V-$5,950.00

Clue August, 2015 Page 13

Page 14: Clue Machinery - August 2015 Issue

CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

AIR COMPRESSORS

GARDNER DENVER, Eberda, 15hp compressor

DRILLS

SAALFELD, BS50 Pillar drill, 2" capacity

FACING & CENTERING

SENECA FALLS CNCSENECA FALLS, CS, LO. Swing

GRINDERS

STUDER, S36 CNC, CylindricalCHEVALIER, FSG-618M, 6"x 18" ManualOKAMOTO, ACC-618, 6"x 18" HydarulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"HASBERG, FS5 CutterBLANCHARD, 16" Vertical surface grinder

KEYSEATERS

MORRISON Keyseater

LATHES, CNC

DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisNAKAMURA TOME, TMC-15NAKAMURA TOME, SL-JR

LATHES, ENGINE

NAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"

MORANDO, 24"x 120"PBR, TM-300, 24"x 196"

MACHINING CENTERS

ENSHU, JE30S, HorizontalOKUMA, MA40-HA, 16", HorizontalMORI-SEIKI, NV-5000, Vertical

MILLS, UNIVERSAL

JAFO, FWD 25U, 10"x 50"

MILLS, VERTICAL

FIRST, LC, 9"x 42" 1-1/2TOPWELL, VK 4, 10"x 50"FIRST, LC20VH, 10"x 50" Vert/HorizKAO FONG, 12"x 50" Horz/Vert

SAWS

BAXTER, 260, 10", HorizontalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous

SHEARS, POWER SQUARING

DIACRO, 24"x 16ga Hand shear with standAMADA, M-2560, 1/4"x 8’

WELDERS, SPOT

CANOX, CPMS-20FT 20 KVA

TOOLING

WAHLI, MXH 300/200 Tool setterLYNDEX, E348 Elba tool setter

MISCELLANEOUS

End Finishing Machine, SOCO, EF-PV/52Parts cleaner, HOTSY, 7630Parts cleaner, HOTSY, H20-2836Thread Rolling Machine, SHENG JIAN, Z28-63Tilting box table, 30"x 24"x 22"

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS

PAGE 22 CLUE, April 2012

MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.com

e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

Latest Installation by FERRIC Machinery

Speed Bend 3760x220 press brake at Tri-Mach Group, Elmira, ON

Tri-Mach Group Inc. is a multi-trade, turn-key solution provider of sanitary equipment & best-in-class services for the Food Processing, Liquid Processing, and Personal Health Care industries. Providing their customers with custom solutions to complex problems saving them time & money. To upgrade the bending department they choose the FERRIC-ERMAK Speed Bend Pro 12ft x 242 ton to increase their productivity with faster set ups on the ER90 Plus 2D-full 3D control and off line programming software capable of uploading dxf files from parts. The flexibility of the standard 4 axes back gauge and the CNC crowning allows accurate bending with a minimum input from the operator.

www.ferr icmachinery.com

All FERRIC products are sold with installation and training.Local service by our local FERRIC team.

For more information on the FERRIC-ERMAK products visit:

FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]

Westside Service Ltd.122 Broxburn Blvd, Lethbridge, AB

Tel: 403-380-5047 [email protected]

Page 14 Clue August, 2015

Page 15: Clue Machinery - August 2015 Issue

7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

MAS VR8A98” Radial Drill

BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63”x 86” travels, Fanuc 31i control new 20124.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capGRINDER, SURFACE6”x16” OKAMOTO 618DX2, mag chuck, coolant, excellent condition!LATHES, ENGINETOS SN 400N, 16"x 80", (2003) 2-Axis, DROENTERPRISE, 20"x 120"TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy duty

LATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO

SYLVAIN TREMBLAY MACHINERY

Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500

TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO

Press Brake, WARCOM, FUTURA, 125TMx4M, CNC 6axis, tooling $37,500

Kone 50TM (2 x 25TM) X 45', Mint Condition

CLEARANCE SALE, MUST BE SOLD

FANUC robot arc mate with 450A LINDE power source, 460V

LVD Shear, Max. Cap. 20' x 1/2'', Back Gauge

AMADA PROMECAM, STPC 200TM-4M, 3 axis-Tooling, $18,500

Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]

ALL MACHINES

REVISED DOWN

Clue August, 2015 Page 15

Page 16: Clue Machinery - August 2015 Issue

B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

B7000 BRAKES, PRESS

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op.

Manual Gauge, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco

5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,

Crowning, Laser safety, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

55 Ton AMADA, RG 50 (1996), NC 9EXII, Ref# 10300, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

55 Ton x 82.1" AMADA, RG5020LD (2004), Up-Acting w/LD

2-Axis CNC control, Ref# 10293, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

70 Ton x 10’ ALLSTEEL, , CNC, Automec, Light curtains,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,

Ref# 10286, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

88 Ton AMADA, HDS8025NT (2008), Ref# 10244, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in

2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis

touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,

Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

99 Ton DURMA, AD-E 3090 (2007), Delem DA-51 2-Axis, Ref#

10184, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

110 Ton AMADA, FBDIII 1030NT (2000), 122", Ref# 10112,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

110 Ton AMADA, HFE 1003S/7 (2000), CNC, 122", Ref#

10144, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic

bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon

2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric

Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)

See Page 6

110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,

CNC Crown, DNC angel prog., (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System

5000, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

130 Ton x 12’ ACCURPRESS, 713012 (1997), Upgraded

ETC3000 ctrl, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,

165", Ref# 10214, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#

9978, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7

Axis touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis, Ref#

10245, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid

CNC, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke

Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

PAGE 16 CLUE, August, 2015

CLASSIFIED -LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

website: www.fabtec.ca

Page 16 Clue August, 2015

Page 17: Clue Machinery - August 2015 Issue

CLUE, April 2014 PAGE 17

B7000 BRAKES, PRESS L0850 LASERS

148 Ton x 10’ BYSTRONIC, 3100 x 130, 6 axes back gauge,

Hyd clamping, with tooling, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

150 Ton x 10’ “NEW” FERRIC, Speed Bend 3100x135, XRZ1Z2

back gaug, CNC crown, 2-3D prog. off line software, (Ferric

Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)

See Page 6

160 Ton x 3200mm WUXI, WC 67K, New 2012, Delham DA41

2-Axis CNC Control, Never used, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

160 Ton x 13.5’ NISSHINBO, 4100 x 150, XRZ1Z2, CNC

crown, 2D graphic control, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

165 Ton x 12’ HACO, ERM 36150, X-39’, Man Crown, BC55 2D

graphic, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),

ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

187 Ton AMADA, HFE-1704S/7 (2004), Operateur 7-Axis CNC,

Ref# 10166, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2,

Crowning, Clamping, Ref# 10013, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

193 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

242 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x220, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

245 Ton x 14’ HACO, ERM 42225, X back gauge Man Crown,

BC40 Angle prog., (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

350 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x350, XR

Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,

Ref# 10242, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

D5700 DRILLS, RADIAL

MAS, VR5A, (Powermaster Machinery Ltd Tel: 905-624-9327,

Fax: 905-624-8591) See Page 2

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

64" x 5MT TOS, VR5, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric,

Gas, Oil, Propane, for all purposes, (Park Thermal

International Tel: 905-877-5254, Fax: 905-877-6205)

G8025 GRINDERS, SURFACE, RECIPROC

8"x 24" ENCO, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

8"x 24" TOS, BRH20, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

G9030 GRINDERS, MISCELLANEOUS

DECKEL, SO, End Mill, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

HEINMAN, , Cutter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

I6200 IRONWORKERS

50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

75 Ton KINGSLAND, 75XS, Dual operator, 5 stations, (Ferric

Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)

See Page 6

80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

L0850 LASERS

WUHAN, Goldel, New 2012, 650 Watts Yag lamp laser, Gantry

design, Never used, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

1500 Watt AMADA, LC1212XL (1995), 4’ x 8’, Rebuilt 2012,

Ref# 10251, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

2000 Watt AMADA, Pulsar LC2415XLA3 (2000), 61"x 198"

w/REPO, Ref# 10305, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,

New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#

9955, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

2KW TRUMPF, L2030 (2007), 4’x 10’, Low hours, Ref# 10237,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

3000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483

Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:

2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,

Ref# 10287, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

CNC MACHINES • FABRICATING EQUIPMENT • PRINTING PRESSES, BINDERY EQUIPMENT • CONSTRUCTION EQUIPMENT • BAKERY EQUIPMENT • NUT &

BOLT MACHINERY • KNITTING MILLS • CONFECTIONARY & FOOD EQUIPMENT • RUBBER MILLS • CHEMICAL & PAINT MIXING EQUIPMENT • CAN MAKING

MACHINERY • PHARMACEUTICAL MACHINERY • WIRE MACHINERY • AUTOMOTIVE PRODUCTION MACHINERY • ANY LARGE QUANTITY OF STEEL

INVENTORIES, ETC.

Please state price, location & conditionWe will purchase single machines

or complete plants

SEND YOUR INFORMATION TO: NORM JACOBSTEL: 416-736-1367 or FAX: 416-736-4159EMAIL: [email protected]

TCL Asset Group Inc.

WE CAN USE YOUR SURPLUS EQUIPMENT

Clue August, 2015 Page 17

Page 18: Clue Machinery - August 2015 Issue

L0850 LASERS L6135 LATHES, N/C & CNC

PAGE 18 CLUE, April 2014

4000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

4000 Watt AMADA, Gemini F0-3015NT (2006), 61"x 122.8",

Approx. 25,900 hrs, Ref# 10301, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt AMADA, FOM2 3015NT (2012), w/ Automatic nozzle

changer, 23,300 hrs, Ref# 10297, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt AMADA, Gemini F0-3015NT (2007), CNC

w/Automatic Nozzle Changer, Ref# 10298, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

4000 Watt AMADA, FOM2 3015NT (2011), w/Automatic nozzle

changer, approx. 31,500hrs, Ref# 10299, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

4000 Watt AMADA, LC3015F1NT (2009), 5’x 10’, AMS-3015 10

Shelf Load/Unload System, Ref# 10187, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

4000 Watt AMADA, Gemini FO-3015NT (2007), 5’x 10’, Approx.

40,000hrs, Ref# 10249, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt AMADA, Theta (2008), 5-AXIS, LC3015CII, No

rotary chk, Ref# 10248, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual

Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual

Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,

Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#

10123, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary

Index, Ref# 10229, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

5000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

5000 Watt TRUMPF, Trulaser L3030 (2012), 5’x 10’, 10000

Laser On & 6000 Beam On, Ref# 10278, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 3

5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#

10072, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#

10114, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

L3000 LATHES, ENGINE

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3

& 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

14"x 40" TOS, SN32, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

17"x 60" COLCHESTER, Mascot, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

18"x 80" DARBERT, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

22"x 60" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw,

2" Bar cap, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

MORI SEIKI, SL150S (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y

Axis Milling, 10"Chk, Live holders, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live

holders, C&Y Mill cap, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

OKUMA, LT25M (2001), Twin spindle, Twin turret, Chip

conveyor, 12’ LNS Barfeeder, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL3000MC/700 (2010), MSX850 Ctrl, C-Axis, Live

mill cap, 15" 3-Jaw, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed

20", Mint cond., (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

HARDINGE, CHNC II SP, Fanuc 14"Sw., 12.5"ctrs, 5000rpm,

10hp, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HYUNDAI, SKT21 (2006), Fanuc Control, 21.7"Swing, 16.1"

turn length, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1-589 Middle�eld Rd, Toronto ON M1V 4Y6Phone: 416-291-9499 Fax: 416-291-4990Email: [email protected]: www.compumachine.ca

Toshiba BTD 9R CNC Boring Mill with Rotary table

Great capacity low price20hp, Vert Travel Of Headstock, Y-39.4",X-48", Spindle Travel, W-20" SaddleTravel Z-35.4", Built-In Pwr Rotary Table35.4" x 41.3", Capacity 5,510.lb

Toshiba BTD 11B P4 CNC Boring Mill Plain Table

Big Capacity 98" table low priceX-98”, Y-59”, Z-62”, W-24”, Table size 98”x 59”, Table load Capacity 17,000lb, Spindle diameter 4.3”, Spindle speeds 1600rpm, Spindle motor 20/30hp

Toshiba TMC 13-3 CNC, VBM w/Live spindle and C axis

Table Diameter: 49.2", Max Swing: 63", Max. Turning Dia: 63", Max Turning Height: 49.2", Max Table load – turning – (milling) 22,000 LBS (15,000LBS), Table RPM 3~250, Table Motor 40/50 HP, Cross Rail Stroke (4) positions 19.7”- 49.2”. ATC 24 Live spindle:, 20 HP (1,500 RPM)New Fanuc 0i-TD CNC Control with warranty.TOSHIBA SALE

CNC Machining Centers2001 Deckel Maho Gildemeister (DMG) DMU-70 Evolution 5-Axis

VMC with Heidenhain TNC 430 Control1990 Mazak VQC 15/40 with Mazatrol M32, Table 16” X 35”, X-22”,

Y-16.1”, Z-15”, 6000rpm2000 Daewoo Mynx 500 Fanuc 21-M Control, Table size 49”x20”

X-40”, Y-20”, Z-20” 6000rpm ATC 241992 Hermle UWF 851 H CNC Univ Milling Mach, Heidenhain 415

CNC Control, X-600mm Y-450mm Z-400mm, 20-4500rpm1993 Enshu 500H CNC Horiz Mach Center Fanuc 16-M Ctrl, Two

Pallet auto changer 20” pallets, X-28” Y-25.6” Z-23.6”, 20-6000rpmCNC Lathes1981 VDF Boehringer 800 3m centers Fanuc 6T Control1981 VDF Boehringer 820 3m centers Fanuc 6T Control1983 VDF Boehringer 800 3m centers Fanuc 0T ControlCNC Boring Mills1996 Toshiba BTD 110 R16 2m x axis, 1500mm Y axis. Rotary

table 55”x63”, ATC 38 Tosnuc 888 ControlBoring Mills2001 Tos W100A Horizontal with Heidenhain 3 axis DRO

Union Floor Type Horizontal, BFP 125 Accurite 3 axis DRO Spindle Diameter 5”, 12 Ton Rotary table and floor platesEngine lathesMerli Clover 24” swing, 80” centersGiana Torgim. 32” swing, 140” centers 15” chuckChien Yeh 14” swing 60” centers 8” chuckMilling machines Dah- Lih: DL-VHRU-G2, 10” x 48” table, 40 taper (vert. & horiz.),

133-2160 rpm (belt)- vert., 50- 750 rpm (belt)- horiz.. c/w x- axis power feedPresses60 Ton Hydraulic H frame pressFork liftsElectric Lift- Truck: Clark; E-C 500, 5000 lb. capacity, 188” lift. c/w battery charger.GrindersKarstens CNC Universal Cylindrical Grinder, 12” magnetic chuck,

24” swing, 60” centers, Universal Swivel grinding wheel, George Karstens CNC Control

Page 18 Clue August, 2015

Page 19: Clue Machinery - August 2015 Issue

L6135 LATHES, N/C & CNC P7100 PRESSES, STRAIGHT SIDE

22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens

840D, 16" Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens

840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0130 MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0185 MACHINING CTRS, VERT

LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta

CNC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9",

Ref# 9854, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5

CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5",

Fanuc O-MC, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

M1550 MILLS, CNC

MIKRON, WF31C, Fanuc OM, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

SUPERMAX, , Knee type Centroid CNC, (Powermaster

Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)

See Page 2

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

M1659 MILLS, UNIVERSAL

10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

N5230 NOTCHING MACHINES

(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

1/4"x 8.6"x 8.6" EUROMAC, , Hyd. Notcher w/Bending

Attachment, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric Machinery

Inc Tel: 877-337-7424, Fax: 905-820-3234) See Page 6

O7397 OVENS

New & Reconditioned , Powered by Electric, Gas, Oil, Propane,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P2135 PLASMA CUTTING MACHINES

100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC

plasma, Metalmaster II, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P6100 PRESSES, OBI

60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable

Stroke Length, Command stamp ctls, (Brighton Machinery

Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch

w/air assist, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

P7100 PRESSES, STRAIGHT SIDE

800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,

20-40spm, Like New!, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 19

British Columbia

Modern Tool (BC) Ltd, Port Coquitlam (Pam).......................................... 604-472-1444............604-472-1455............23

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...................................... 519-485-7089............519-485-7368............18

Compumachine Canada, Toronto (Peter)................................................ 416-291-9499............416-291-4990............18

Corporate Assets Inc, Toronto (Marketing).............................................. 416-962-9600............416-962-9601..............9

DiPaolo Machine Tools Ltd., Mississauga (Nelson).................................905-676-9265............905-676-9436............10

Fabtec Machine Tool Solutions Inc, Oakville (Raj) ..................................905-469-1586............905-469-3054............16

Ferric Machinery Inc, Mississauga (Koen) .............................................. 877-337-7424............905-820-3234..............6

Havlik Int’l Machinery, Cambridge (John)................................................ 519-624-6240............519-624-4119..............1

L S Walker Machine Tools Inc, Milton (Chris) .......................................... 905-876-0890............905-876-1959............15

Machine Solutions Inc., Guelph (Andrew) ............................................... 416-220-5910................................................ 8

Park Thermal International, Georgetown (Sales) ....................................905-877-5254............905-877-6205............18

Paul Machinery, Burlington (Paul) ........................................................... 905-634-8442............905-681-6940............23

Phase Quest, Mississauga (Harold)........................................................ 416-578-5399............416-753-7209............18

Powermaster Machinery Ltd, Mississauga (Peter) ..................................905-624-9327............905-624-8591..............2

S K Braly Machinery Inc, Mississauga (Steve)........................................ 905-793-8080............905-793-2190............14

SMTCL Canada Inc., Oakville (Merry) .................................................... 905-829-1579............905-829-8692............24

Stevens Machinery Sales (2005) Inc, Toronto (Andrew) .........................416-798-3611............416-798-8439............13

TCL Asset Group Inc, Toronto (Norm)..................................................... 416-736-1367............416-736-4159............17

TOS Trade Canada Inc., Milton (Marian) ................................................ 905-878-0888............905-878-9022............22

Trader Machinery Inc, Concord (Jonathan)............................................. 905-669-7507............905-669-7512..............4

Quebec

Machinerie Gilles Lupien, Drummondville (Gilles)...................................819-478-5266............819-478-5266............18

Machinery S. Tremblay, Drummondville (Sylvain) ...................................819-477-6677............819-477-6466............15

Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).....................................514-935-3531............514-932-4459..............7

USA

Machinery Network, Los Angeles, CA (Gary).......................................... 818-788-2260............310-826-2320............23

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan).........................845-398-0073............845-398-0074..............3

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORYOvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Numerous Sizes Available

Call: 905-702-4644

Clue August, 2015 Page 19

Page 20: Clue Machinery - August 2015 Issue

P9150 PUNCHES, SINGLE STATION

25 Ton PIERCE-ALL, , (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9275 PUNCHES, TURRET

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#

9812, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 3

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,

Ref# 9851, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,

50"x 100", Ref# 10267, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,

Ref# 10304, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW

Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton FINN POWER, F5-20 (2000), 60"x 80", 20 Station,

Thick Style, Ref# 10266, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,

Ref# 10124, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 50"x 100",

Servo driven, Ref# 10220, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

22 Ton AMADA, Vipros 255 (2000), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,

Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,

14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

27.5 Ton TRUMPF, TC500R Bosch CNC (2000), 18 Sta. Rot.,

Liftmaster, Ref# 10284, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

27.5 Ton TRUMPF, TC500R-1600 (1996), TRUM CC220, 65" x

121", Ref# 10285, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Pega 345Q (1993), Fanuc O4PC, 58 Sta., 2

A/I, Ref# 10283, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &

PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2 A/I,

Ref# 10007, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I,

Ref# 10250, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,

Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton NISSHINBO, HIQ1250PAL-510T (2000), 37 Station

Thick Turret, 3 A/I, Ref# 10212, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton MURATEC WIEDEMANN, 3046A (2000), Fanuc 18-iP,

Ref# 9690, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Apelio III 357V (1998), Fanuc 16L CNC Ctrl,

1500 Watt Laser, Ref# 10274, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC

control, Ref# 10173, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

33 Ton AMADA, Pega 345Q (1993), Fanuc 04PC, 58 Sta, 2 A/I,

Ref# 10157, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 3

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,

Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK60, Mod. Rolls,

DRO, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.

Side guides, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital

Readout, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R5603 ROLLS, PLATE BENDING

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.

Bending roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

5/16"x 8’ “NEW” FERRIC, , AHS plate roll, 4 roll machine, DRO,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

NANTONG, WIIJ-10, Max. Cap 3/8" x 6’, New 2012, Never

used, Roll speed 4m/min, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

S0653 SAWS, BAND, HORIZONTAL

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz,

PLC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

S0690 SAWS, BAND, VERTICAL

24" STARTRITE, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

S4105 SHEARS, POWER SQUARING

1/4"x 10’ “NEW” ACCURSHEAR, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/4"x 10’ HACO, HSLX 3006, Mot. CNC back gauge, auto

gap-angle, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

1/4"x 10’ HACO, TS3006 (2001), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 6

W3054 WELDERS, SPOT

20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

LNS, , Barfeeds, Servo S2 & S3, Late models, w/Remote

pendant, Excellent, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

LYNDEY, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

WAHLI, Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 2

SUNNEN, MBB-1650, Manual Honing Machine, Asst’d Tooling &

Cabinet, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

P9150 PUNCHES, SINGLE STATION Z9000 MISCELLANEOUS

PAGE 22 CLUE, August, 2015Page 20 Clue August, 2015

Page 21: Clue Machinery - August 2015 Issue

MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine

PAGE 30 CLUE, December 2013

AIR COMPRESSORS

JUN AIR 15 litre 120psi

QUINCY 5hp

DRILLS

BUFFALO

ALLEN drill press, 3ph

ARBOGA (G1304) Bench top drill

WESCO MILL

HERBERT 15" 3ph

CINCINNATI BICKFORD 24"

FORK LIFT TRUCKS

TOYOTA 3000lb 3 wheel

TCM 5000 lb propane, 4 stge mast, side shift

NISSAN 5000lb propane, 3 stg mast, side shift

TCM 10000 lb Propane, 3stge mast

Assorted Pallet Trucks

HYSTER 15000 lb propane, 3stge mast, side

shift

GRINDERS

BALDOR 3/4hp pedestal grinder

BALDOR 2hp 10" double end ped. Grinder

THOR Pedestal grinder

DELTA ROCKWELL 6" belt grinder/sander

JONES & SHIPMAN Surface Grinder 540,

550v, 3ph

BROWN & SHARPE 10"x 24" Cylindrical

LATHES, ENGINE

SOUTHBEND 12" swing

STANDARD MODERN 12" swing

HARRISON 11"x 20"

CHIEN-YEH 14"x 36" 24" gap

TOS (SV18RA) 15"x 60"

VOEST 17"x 60"

MILLS

HONEYWELL Light curtains

FIRST (LC-20VSG) w/Readout

EXCELLO (602)

HASCO 9"x 42" R8 taper

FIRST (LC-20VSG) 10"x 51" 40 taper

TOS (FA3AV) 12"x 54" 40 taper

PRESSES

ARBOR (#2)

GREENERD (#3a) Arbor Press

JET (#3) Arbor Press AP3

ALGOMA 50T H Press, 575v, 3ph

BUFFALO 100T H press

ROLLS

B&B 36" x 18ga Hand Rolls

NIAGARA 4’ Initial Power Pinch rolls

SAWS, BAND, HORIZONTAL

CRAFTEX 10" table saw

GREENLEE (1346) 7"x 10" single phase

SAWS, BAND, VERTICAL

RIGID (MS1065LZA) 10" compound mitre saw

HOE JUN (HV400)

CLIPPER (BBC156) 14" Concrete saw

MAKITA 14" Chop saw, single phase

MEP (Rabbit 351) 14" Cold cut saw

THOMAS 14" Cold cut saw

DOALL 20"

WILSON 28" Vertical Woodworking band saw

GROB 36" band saw

WELDERS

MILLER (250P) Stick welder

AERCOLOGY’S WELDAIR (WA1000CP)

Smoke eater

THERMAL ARC (PAK 5Xr) Plasma cutter

MILLER (Coolmate 4) Water cooler

ARCWELD (G022263) 230/460/575

Smoke Eater, NEDERMAN

HOBART (300RVS) Mig Welder w/Feeder

LINCOLN (CV-300)

THERMALARC (250 Tigwave)

CANOX Arc Welder

L-TEC Heliarc 250hf plus squarewave

MILLER (Big 50) Diesel welder, 400 amp

MILLER (D302) 3+12 Diesel welder

MEMCO (Stick AC-225) single phase

MISCELLANEOUS

Assorted Transformers

Hydraulic Pump

Industrial Fan, VARY 4’ x 4’

MITUTOYO height gauges, assorted sizes

Wet Soda Blaster 38 x 41 x 38

Assorted Rotary Tables

Finger Brake, CHICAGO 5’

Mag. Lathe Chuck, ECLIPSE

Assorted Demagnetisers

HILTI (DXA40 driver) w/ XHN date stamp

attachment

Bead Rolling Machine, CMZ7, 114v, single ph

Pressure Washer, PSC 600v, 3ph

Assorted Measuring Tools

Belt Sander, BROOK HANSEN 6"x 80"

Pipe Vise Stands, (2) PILOT (No.20)

Angle Plates

Torque Wrench, PROTO 600 ft/lbs

Collet sets

Assorted vises

Assorted Chain Hoists

Threading Caddy, RIGID

Magnets, 800-1000kg

Hardness Testers

Pedestal Buffer, CINCINATTI 14"

JET & CM 10T chain falls, 20’ lift

Bore Gauge, SUNNEN (Dial)

Tri Vise, RIGID

RIGID Tooling for threading machine

Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5

www.paulmachinery.com

Clue August, 2015 Page 21

Page 22: Clue Machinery - August 2015 Issue

a TOS Varnsdorf company

TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com

Tel: (905) 878 0888Fax: (905) 878 [email protected]

WHN-13 CNCStructured to guaranteehigh rigidity, reliabilityand accuracy.

Wide range of technologicalfunctions

www.tostrade.com

Starting at:$499,000 US

X - 3500 mm / 137.79”Y - 2500 mm / 98.42”Z - 1600 mm / 62.99”W - 800 mm / 31.49”

Spindle 130mm / 5.1”Speed 3000 rpm

Table 1800 x 2200 mm 70.8” x 86.6”

CNC Fanuc / Heidenhain

Page 22 Clue August, 2015

Page 23: Clue Machinery - August 2015 Issue

CLUE MAGAZINE • Full Page • August Issue

For More Information and Complete Photo Gallery, go to:www.machinerynetworkauctions.com

or call 818-465-6700 • [email protected]

FEATURED EQUIPMENT: (3) Nakamura SC 250 CNC Turning Centers,(4) Miyano LX01 CNC Turning Centers, (10) Omniturn GT 75 CNC Turning Centers,(4) Hardinge Cobra 65 CNC Turning Centers, 5,000 Lbs. Hyster S50E Forklift, YaleL83C-060-SBT-083-LP Forklift & More.

ONSITE & WEBCAST AUCTION: Thursday, August 13LOCATION: 6606 Variel Avenue, Canoga Park, California

(4) PUBLIC AUCTIONS

ONLINE BIDDING AVAILABLE:

AUCTIONDATE

11:00 AM PDT

AUGUST

13

SURPLUS TO THE ONGOING OPERATIONS OF A

FASTENER MANUFACTURER

FEATURED EQUIPMENT: Turret Punch Press, Laser Inspection System,Hydraulic Drawing Press, Surface Grinder, C-Frame Press, Servomatic, Straightener, Coil Handler,Punch/Press Brake, Punch Press, Bandsaws, Pedestal Grinder/Buffer, Belt Surface Sander,Surface Grinder, Pipe Cutter, Slide Feeders, Silkscreen Printing Press, Steam Generator, WashTank, Conveyed Wash System, Down Draft Paint Booths, Air Units & More.

Sale in Conjunction with: PERFECTION INDUSTRIAL SALES

ONLINE AUCTION: Tuesday, August 18ASSET LOCATION: 3808 Sullivan Road, Bldg. 14, Spokane, Washington

CLOSING FROM

11:00 AM PDT

AUGUST

18

SURPLUS TO THE ONGOING NEEDS OF A

MAJOR CUSTOM FABRICATOR

FEATURED EQUIPMENT: Over 50+ Plastic Injection & Blow Molders up to 1,500 Ton asnew as 2005, Nissei, Van Dorn, Toshiba, Sterling, Newbury & Trueblood, Huge Tool Roomw/CNC Machines, (5) EDM Machines, (8) Vertical Mills, Compressors & Dryers,Grinders, Welders, (9) Forklifts up to 24,000 Lbs., 30,000 lb. Truck Crane Mfg. 2007,CMM’s, Comparators, Quality Support Equipment & More.

ONSITE & WEBCAST AUCTION: Tuesday, September 15LOCATION: 115 Plasticraft Drive, Albertville, Alabama

AUCTIONDATE

11:00 AM CDT

SEPTEMBER

15

PLANT CLOSURE OF: PLASTICRAFT MANUFACTURING COMPANY, INC.

MANUFACTURER OF INJECTION,INSERTION & BLOW MOLDING

PLASTIC COMPONENTS

FEATURED EQUIPMENT: (2) OKK VM5II 4axis, (1) OKK PCC-510 VMCs,(2) OKUMA L1410, (1) OKUMA LB15, CHEVALIER FCL-1840 CNC Lathes, Huge Toolroomwith EZTrak Mill, Several Bridgeports, Grinders, Quality & Inspection Equipment,Saws, Forklifts, Scrap, Office & Much More.

ONSITE & WEBCAST AUCTION: Wednesday, September 9LOCATION: 1021 N. Grove Street, Anaheim, California

AUCTIONDATE

11:00 AM PDT

SEPTEMBER

9

PLANT CLOSURE OF A

AEROSPACE JOB SHOP

Clue August, 2015 Page 23

Page 24: Clue Machinery - August 2015 Issue

M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222

Address: 2783 Portland Dr. Oakville ON L6H 6M6 Tel: 905-829-1579 Email: [email protected] Website: www.smtcl.com www.smtcl.ca

CY-K800B/3000 • Distance Between Centers: 118” • Swing Over Bed: 31.5” • Swing Over Cross Slide: 20.5” • Width of Bed: 23.6” • Spindle Bore: 5” • Spindle Speed: 22-1200rpm • Main Motor: 20HP

CY-K510n/1500, CYK510n/2000 • Distance Between Centers: 59” to 79” • Swing Over Bed: 19.7” • Swing Over Cross Slide: 11.4” • Width of Bed: 15.4” • Spindle Bore: 3.2” • Spindle Speed: 35 – 2500rpm • Main Motor: 10HP

New Arriving Teach-in CNC Lathes With Fagor Control: Fagor 8055i-TC Control, 2-axis drive motor, heat exchanger, full cover door, (10”/16”) 3 jaw chuck, 4-position turret, electric hand wheel, steady rest, follow rest, damping washer, absolute encoder

Special Deal For New Machineries!

New Arriving 3-Axis CNC Turning Center (SCHIESS - German Design): FANUC Oi TD control, α servo spindle motor with manual guide Horizontal 12 position DM servo turret, 1 axial live tool, 1 radial live tool and 10 standard tool holders

VIVA T2Sm/500 • Max Swing Diameter: 22” • Max Cutting Length: 19.3” • Spindle Hole Diameter: 3.5” • Spindle Speed Range: 30-4000 rpm • Main Motor Output Power: 15/18.5 kw

Canada Inc.

VIVA T4Cm/1000 • Max Swing Diameter: 28.3” • Max Cutting Length: 40” • Max Cutting Diameter: 20” • Spindle Speed Range: 30-3000 rpm • Main Motor Output Power: 22/30 kw

Page 24 Clue August, 2015