CLT - Schilliger CH · CLT Cross-Laminated Timber competence and innovation SCHILLIGER HOLZ – A...
4
Version 01-15 CLT Cross-Laminated Timber competence and innovation SCHILLIGER HOLZ – A WIDE RANGE OF PRODUCTS AND SERVICES In addition to our sawmills and planing mills, Schilliger Holz AG operates state of the art plants for the production and processing of CLT panels. Furthermore, you benefit from our consulting services in timber engineering, surface eninee- ring and production of timber products. This makes Schilliger Holz AG your competent and innovative partner for your complete timber engineering project. SCHILLIGER HOLZ – NATURAL QUALITY FROM SWITZERLAND Schilliger Holz AG almost exclusively processes Swiss timber in its Swiss production plants. The timber is harvested from forests with sustainable forest management. This is guaranteed by FSC/PEFC certificates. Furthermore, short transport distances contribute to an environmentally friendly production. All load-bearing products meet CE requirements. The internal quality management is approved according to DIN EN ISO 9001. DTA 3/13-753 SCHILLIGER HOLZ – ALWAYS NEARBY Haltikon (CH) Volgelsheim (F) Perlen (CH) Schilliger Holz AG Haltikon 33, CH-6403 Küssnacht Phone +41 41 854 08 00, Fax +41 41 854 08 01 [email protected], www.schilliger.ch Schilliger Bois SAS Rue du Port Rhénan, F-68600 Volgelsheim Phone +33 389 72 16 00, Fax +33 389 72 95 01 [email protected], www.schilliger.fr Schilliger Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected] Our Strengths – Your Benefit Please note The general terms and conditions of sale, delivery and payment of Schilliger Holz AG (AVB) and the information in the technical data sheets shall apply.
Transcript of CLT - Schilliger CH · CLT Cross-Laminated Timber competence and innovation SCHILLIGER HOLZ – A...
Vers
ion
01-1
5
CLTCross-Laminated Timber
competence and innovation
SCHILLIGER HOLZ – A WIDE RANGE OF PRODUCTS AND SERVICES
In addition to our sawmills and planing mills, Schilliger Holz AG operates state of the art plants for the production and processing of CLT panels. Furthermore, you benefi t from our consulting services in timber engineering, surface eninee-ring and production of timber products. This makes Schilliger Holz AG your competent and innovative partner for your complete timber engineering project.
SCHILLIGER HOLZ – NATURAL QUALITY FROM SWITZERLAND
Schilliger Holz AG almost exclusively processes Swiss timber in its Swiss production plants. The timber is harvested from forests with sustainable forest management. This is guaranteed by FSC/PEFC certifi cates. Furthermore, short transport distances contribute to an environmentally friendly production. All load-bearing products meet CE requirements. The internal quality management is approved according to DIN EN ISO 9001.
DTA 3/13-753
SCHILLIGER HOLZ – ALWAYS NEARBY
Haltikon (CH) Volgelsheim (F) Perlen (CH)
Schilliger Holz AG
Haltikon 33, CH-6403 Küssnacht Phone +41 41 854 08 00, Fax +41 41 854 08 01 [email protected], www.schilliger.ch
Schilliger Bois SAS
Rue du Port Rhénan, F-68600 VolgelsheimPhone +33 389 72 16 00, Fax +33 389 72 95 [email protected], www.schilliger.fr
Schilliger Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected]
Our Strengths – Your Benefi t
Please note
The general terms and conditions of sale, delivery and payment of Schilliger Holz AG (AVB) and the information in the technical data sheets shall apply.
Product Details
MATERIAL PROPERTIESWood species Spruce, fi r; other species available upon request
Surface grades B/B for constructions with both panel faces visible
B/D for constructions with one panel face visible
C/C for constructions with low aesthetic requirements
D/D construction panels
Moisture content 10 % ± 2 %
Water vapour diff usion 40 – 80 μresistance factor
Water vapour permeability 0.7576 mg/m·hPa
Thermal conductivity 0.10 W/m·K
Fire index 4.3 (reaction to fi re: D-s2,dO)
Air tightness Outer layers edge-glued for air tightness
Carbon storage 215 kg/m3 (788 kg/m3 CO2e)
Adhesive Polyurethan (PUR), formaldehyde and solvent free, transparent glue lines, water resistant
DIMENSIONSPanel thickness 27 – 500 mm
Grain direction Outer layers available with longitudinal or transverse grain direction
Maximum panel size 13 700 x 3 400 mm
Layer thickness 9 – 40 mm
Specifi c weight 5.0 kN/m3
SURFACE GRADES B C D
Application For visible constructions in For constructions with For non-visible residential buildings opaque paint coating constructions (Repairs mainly with wood fi ller)
Appearance, colour, Colour and texture mainly No requirements No requirementstexture well-balanced, coarse textures allowed, colour changes up to 20% allowed
Knots Sound, tight knots allowed. No requirements. Repairs No requirements Other knots or knot holes with with wood fi ller. largest visible diameter above 20mm will be plugged with wood plugs.
Shakes, checks and splits Occasional surface and end Allowed Allowed up to 50mm allowed
Gluing of end joints in Outer layers edge-glued Finger jointed No requirements. outer layers Individual boards may be used as well.
Surface Sanded (at least grit 60). No requirements. No requirements Occasional minor defects Sanded. allowed. Fine sanding on site by client required.
Repairs With wooden patches or wood fi ller With wood fi ller Not required
Cutting is carried out with state of the art CAD and CNC tech-nology.
Schilliger Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected] Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected]
Schilliger CLT Panels are available in various grades and dimensions.
Structural information
ASSUMED LOADImposed load (nk)/use Category kN/m2 kN
Residential space A 1.5 – 2.5 2.0 – 3.0
Offi ce space B 2.5 – 3.0 1.5 – 4.5
Schools, and public C 2.0 – 3.0 3.0 – 4.0buildings
Retail space D 4.0 – 5.0 3.5 – 7.0
Industrial space 7.5
Dead load (gk) Category kN/m3 kN
Standard panel C24 5kN/m3
Typical fl oor assembly 1.5 – 2.0
WALL THICKNESSBuilding type Floor-to-fl oor height Number of storeys Panel thickness
Residential buildings 3m 1 – 3 80 – 100 mm
4 – 6 120 – 140 mm
School and offi ce buildings 4m 1 80 – 100 mm
2 120 – 140 mm
Depending on the requirements a panel thickness of 60mm can already be suffi cient for structural stability.
Schilliger Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected] Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected]
Fire resistance [minutes]
R0
R30
R60
R90
Single span Double span
L L L
The table above gives a general indication for appropriate CLT panel thicknesses and does not by any means replace a structural analysis. The values are based on the assumption of a uniformly distributed area load. The dimensions are based on Eurocode 5 and ETA-08/0238. The self-weight of the CLT panels is included in the calculations.
Span L
3m 4m 5m 6mPermitted fi nal defl ection L/250
Double span CLT3-75 CLT3-80 CLT3-120 CLT5-150 CLT3-75 CLT3-100 CLT3-120 CLT5-170 CLT3-75 CLT3-100 CLT5-150 CLT5-170 CLT3-75 CLT3-115 CLT3-120 CLT5-170 CLT3-75 CLT3-115 CLT5-150 CLT5-180 CLT3-75 CLT3-120 CLT5-170 CLT5-180 CLT3-80 CLT3-120 CLT5-170 CLT5-180 CLT3-50 CLT3-120 CLT5-170 CLT5-225 CLT3-80 CLT3-120 CLT5-170 CLT5-225 CLT3-80 CLT3-120 CLT5-170 CLT5-225
Span L
3m 4m 5m 6mPermitted fi nal defl ection L/250
Single span CLT3-80 CLT3-100 CLT5-160 CLT5-180 CLT3-80 CLT3-120 CLT5-160 CLT5-180 CLT3-80 CLT3-120 CLT5-170 CLT5-200 CLT3-100 CLT3-120 CLT5-170 CLT5-225 CLT3-100 CLT3-120 CLT5-170 CLT5-225 CLT3-100 CLT3-140 CLT5-170 CLT5-250 CLT3-120 CLT3-140 CLT5-180 CLT5-250 CLT3-120 CLT3-160 CLT5-180 CLT5-250 CLT3-120 CLT3-160 CLT5-180 CLT5-250 CLT3-140 CLT3-160 CLT5-200 CLT5-250w
Distributed
load
gk + nk
kN/m2
2.53.03.54.04.55.05.56.06.57.0
Schilliger CLT Panels can be used as fl oor and ceiling panels as well.
Construction details
Panel to panel connection, oblique angle
Schilliger Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected] Holz AG | Haltikon 33 | CH-6403 Küssnacht | www.schilliger.ch | [email protected]
D1 Connection with metal bracket
D4 Wall to wall: corner D6 Floor to external wall
D2 Connection with concealed metal plate
D5 Internal to external wall
D7 Floor to internal wall
D3 Roof to wall
D8 Panel to panel, single surface spline
Panel to panel connection
