CLT AND MASSIVE TIMBER SEMINARSydney 18 June 2013

Erkki Valikangas

Stora Enso Timber Australia

2

Stora Enso in brief

• 11.8 million tons of paper and board, 1.3 billion m2 of corrugated packaging• 5.8 million m3 of sawn wood products and processed wood products• Sales 2012 EUR10.8billion• Approximately 28 000 employees in more than 35 countries• Largest CLT producer in the world• Stora Enso Timber Australia Pty Ltd was incorporated in 2005

Stora Enso is global paper, packaging and wood products company producing newsprint and book paper, magazine paper, fine paper, consumer board, industrial packaging and wood products.

June 2013CLT AND MASSIVE TIMBER SEMINAR

Biomaterials Printing and Reading

Renewable Packaging

Building and Living

3

CLT PROCUREMENT PROCESS

June 2013CLT AND MASSIVE TIMBER SEMINAR

• Good CLT design starts at the very beginning – the project must be designed with CLT in mind rather than changing CLT to fit existing design

• Things to consider;– Panel sizes vs. manufacturer’s standard production sizes– ‘nesting’ i.e. optimisation of the panels in relation to the

‘master’ panels => minimise waste– Top lamella orientation and quality– Handling on site, including building sequence– Logistics

4

CLT PROCUREMENT PROCESSPanel sizes and panel optimisation (nesting)

June 2013CLT AND MASSIVE TIMBER SEMINAR

Manufacturer Max Length, m Max Width, m Thickness, mm22.00m 3.50m 60 - 200mm24.00m 1.25m 60 - 280mm

KLH 16.50m 2.95m 57 - 500mmLignotrend 18.00m 0.625m 143 - 302mmMayer Melnhof-Kaufmann 16.50m 3.00m 57 - 278mmMerkle Holz 18.00m 0.60m or 0.72m 80 - 300mmStora Enso Building Solutions 16.00m 2.95m 60 - 400mm

Binder Holz

- Panel production sizes vary between manufacturers- Engineers at the mill will optimise the cutting

patterns to maximise the yield from the ‘master’ panel

5

CLT PROCUREMENT PROCESSPanel sizes and panel optimisation

June 2013CLT AND MASSIVE TIMBER SEMINAR

• Top lamella orientation different between wall and floor panels

• Typical qualities;– Non visible– Industrial Visible– Visible

• Door and window openings etc can be cut as required

Wall panel

Floor panel

6

CLT PROCUREMENT PROCESSBuilding sequence

June 2013CLT AND MASSIVE TIMBER SEMINAR

label

Elementbezeichnung

order ofloadingVerl.-RF

LKW-Nr

description of product(WW: can contain RW)

(RW: can contain WW)

Produktbezeichnung

[cm]

[cm]sequence

05WA_W0_31 264 2 CLT 150 INV L5S WW C24 SAN 834.0 215.0 31

05WA_W0_32 263 2 CLT 150 INV L5S WW C24 SAN 834.0 225.0 32

05WA_W0_33 261 2 CLT 150 NVI L5S WW C24 SAN 834.0 225.0 33

05WA_W0_36 269 2 CLT 150 NVI L5S WW C24 SAN 834.0 122.5 36

05WA_W0_37 262 2 CLT 150 NVI L5S WW C24 SAN 834.0 122.5 37

05WA_W0_38 262 2 CLT 150 NVI L5S WW C24 SAN 830.0 40.0 38

05WA_W0_34 259 3 CLT 150 NVI L5S WW C24 SAN 834.0 225.0 34

05WA_W0_35 260 3 CLT 150 NVI L5S WW C24 SAN 834.0 215.0 35

05WA_W0_39 258 3 CLT 150 NVI L5S WW C24 SAN 834.0 225.0 39

05WA_W0_40 257 3 CLT 150 INV L5S WW C24 SAN 834.0 225.0 40

05WA_W0_41 256 3 CLT 150 INV L5S WW C24 SAN 834.0 225.0 41

05WA_W0_42 255 3 CLT 150 INV L5S WW C24 SAN 834.0 215.0 42

7

CLT PROCUREMENT PROCESSLifting on site

June 2013CLT AND MASSIVE TIMBER SEMINAR

8

CLT PROCUREMENT PROCESSLogistics

June 2013CLT AND MASSIVE TIMBER SEMINAR

9

CLT PROCUREMENT PROCESSLogistics

June 2013CLT AND MASSIVE TIMBER SEMINAR

- CONTAINER SHIPMENT- BREAK BULK SHIPMENT

10

• Pre-carriage from the factory to a sea port either by truck or train

• CLT can be loaded either horizontally or vertically, subject to local road/rail restrictions

• There are several container lines sailing from Europe to SEA; typically containers to Australia are transhipped either at Singapore, Malaysia or Hong Kong

• Delivery time 7-14 days from stuffing the containers at the mill to sailing from an European port

• Sailing time 50 – 60 days

June 2013CLT AND MASSIVE TIMBER SEMINAR

CLT PROCUREMENT PROCESS Logistics

11

CLT PROCUREMENT PROCESSLogistics

June 2013CLT AND MASSIVE TIMBER SEMINAR

40” high cube boxInside measuresL = 12.036mW = 2.350mH = 2.697mDoor W = 2.340mDoor H = 2.577mMax load 26.5t

40” open boxInside measuresL = 12.028mW = 2.350mH = up to 4mMax load 26.6t

40” flat rack Inside measuresL = 12.080mW = 2.126mH = 2.043mMax load 39t

Please note container dimensions may vary between shipping lines and container series

12

• 21/90 day rule; all timber used for the CLT manufacture and packaging must comply with current AQIS regulations; sealed containers must be shipped within 21 days from phytosanitary inspection and arrive in Australia within 90 days from despatch

• Phytosanitary Certificate required for each container

• All containers subject to random AQIS inspection

• All imports are subject to • 5% import duty• Wood levy $0.37/m3

June 2013CLT AND MASSIVE TIMBER SEMINAR

CLT PROCUREMENT PROCESSImport formalities

13

• Risk transfer and import/export oblications depend on chosen delivery terms (INCOTERMS)

• Container unloading• Delivery to site

June 2013CLT AND MASSIVE TIMBER SEMINAR

CLT PROCUREMENT PROCESSRisks, Insurance, Distribution

14June 2013CLT AND MASSIVE TIMBER SEMINAR