CLINICAL PRODUCT CATALOGUE - Shofu Dental India · 2020. 3. 2. · 10 • SHOFU Dental India...

1

CLINICAL PRODUCT CATALOGUE

• SHOFU Dental India Products Catalogue2

OUR VISION

Being one of the world’s leading Dental manufacturers, our Primary Goal is to reach out to the Dental Fraternity and offer Quality Products and Services, ensuring to best meet the expectations of our Health Care Professionals.

Apart from Introducing our Proven, State of the Art Dental Products, We will also thrive to reach out with our Future Research and Developments in order to satisfy the needs of the Ever Evolving & Dynamic Dental Industry.

SMILE...... THE WORLD NEEDS IT !

SHOFU DENTAL INDIA PVT LTD.

3

CONTENTS1.DIRECT RESTORATIVE CEMENTS

CONVENTIONAL TYPE II GLASIONOMER CEMENT :GLASIONOMER CEMENT VERSION 2 IMPROVED

TYPE IX GLASIONOMER CEMENT :GLASIONOMER FX II IMPROVED

ADVANCED TYPE IX GLASIONOMER CEMENT :GLASIONOMER FX ULTRAGLASIONOMER FX ULTRA MINI

HIGH STRENGTH REINFORCED GLASIONOMER CEMENT : HI-DENSE XP(SILVER REINFORCED GIC)ZIRCONOMER IMPROVED (ZIRCONIA REINFORCED GIC)

LIGHT CURED RESIN COAT :COAT ITREFERENCE TABLE FOR RESTORATIVE GIC’S

2.LUTING / CEMENTATION

HY-BOND PERMANENT LUTING CEMENTS :HY-BOND GLASIONOMER CX-SMARTHY-BOND GLASIONOMER CXHY-BOND RESIGLASSHY-BOND POLYCARBOXYLATEHY-BOND ZINC PHOSPHATE

HY-BOND TEMPORARY LUTING/RESTORATIVE :HY-BOND TEMPORARY CEMENT (SOFT)

REFERENCE TABLE FOR LUTING CEMENTS

RESIN LUTING CEMENTS:BEAUTICEM SA

3.DIRECT RESTORATIVE COMPOSITES

THE REVOLUTIONARY LOW SHRINK DIRECT COMPOSITE :BEAUTIFIL II LS

CONVENTIONAL UNIVERSAL PACKABLE COMPOSITE :BEAUTIFIL II

EXTENDED AESTHETICS :BEAUTIFIL ENAMEL

BEAUTIFIL GINGIVA

HIGH STRENGTH INJECTABLE COMPOSITES :BEAUTIFIL INJECTABLE

HIGH STRENGTH FLOWABLE COMPOSITES :BEAUTIFIL FLOW PLUS F03

FLOWABLE COMPOSITES :BEAUTIFIL FLOW F02 (Low Flow)BEAUTIFIL FLOW F10 (High Flow)

OPAQUE COMPOSITES :BEAUTIFIL OPAQUER

9

10

25

26

31

29

30

31

32

33

3435

36

1112

1516

13

14

22

1920

24

21

23

27 - 40

7 - 16

17 - 26


BULK FILL COMPOSITES :BEAUTIFIL BULK RESTORATIVE

BEAUTIFIL BULK FLOWABLE

PIT & FISSURE SEALANT :BEAUTISEALANT

4.PRIMING & BONDING SYSTEMS

BONDING AGENTS :BEAUTIBONDFL BOND II

PRIMERS :AZ PRIMERM.L PRIMER PORCELAIN PRIMER

PORCELAIN REPAIR SYSTEM :P & R REPAIR KIT

CERA RESIN BOND SET

5.ABRASIVE SYSTEM KITS

TOOTH PREPARATION KITS :DIRECT COSMETIC RESTORATION KITCROWN & BRIDGE PREPARATION KITALL CERAMIC PREPARATION KIT

DIRECT COMPOSITE FINISHING & POLISHING:(DISPOSABLE)SUPER-SNAP RAINBOW KITSUPER-SNAP MINI KITSUPER-SNAP POLYSTRIPSSUPER-SNAP XTREME KITONE GLOSS SETSUPER-SNAP BUFF DISC

DIRECT DIA PASTE

SUPER-SNAP SUPER BUFF SET

DIRECT COMPOSITE FINISHING & POLISHING: (AUTOCLAVABLE)COMPOSITE FINISHING KIT COMPOSITE POLISHING KITCOMPOMASTER ASSORTMENT (DIAMOND IMPREGNATED)

INDIRECT COMPOSITE FINISHING & POLISHING:CERAMAGE POLISHING KITDURA POLISH

DURA POLISH DIA

CERAMIC FINISHING & POLISHING :( PFM)PORCELAIN ADJUSTMENT KITENAMEL ADJUSTMENT KIT

38

39

43

4444

42

45

4546

56

60

62

61

66

63

49

64

51

50

47 - 72

41 - 46

57

58

59

65

37

5253535455

5

HIGH END CERAMIC FINISHING & POLISHING :( ZIRCONIA & LITHIUM DI SILICATES)ZILMASTER FINISHING AND POLISHING KIT

INDIRECT VENEERS PREPARATION & POLISHING KIT : PORCELAIN VENEER KIT

OTHER TECHNIQUE KITS :ACRYLIC CONTOURING & FINISHING KIT AMALGAM POLISHING KITGOLD POLISHING KIT NP ALLOY ADJUSTMENT KIT

6.SHOFU DIAMOND INSTRUMENTS

DIAMOND BUR CATALOG

7.INDIVIDUAL ABRASIVE INFORMATION

MANDRELS - HP

DURA GREEN & DURA GREEN FINE STONESDURA GREEN UNMOUNTED WHEELSDURA WHITE STONESDURA GREEN DIABROWNIE,GREENIE & SUPER GREENIECOMPOSITE & COMPOSITE FINE

83

87

8586

81- 94

99 - 94

73 - 80

82

68

6969

88 - 89

90 - 91

77 - 80

92 - 93

96 - 97

7070

67

98

9594

100100101101

COMPOMASTERSOFT CUTCERAMISTEZILMASTERFISSURE CARBIDE BURS

8.MISCELLANEOUS

BUR STATION IISHOFU ADJUSTERUNI BRUSHDIAMOND DRESSER

7

1.DIRECT RESTORATIVE CEMENTS


GLASIONOMER RESTORATIVE CEMENT

Glass Ionomer cements opened a whole new dimension in Restorative Dentistry with its Chemical Bonding to tooth structure thus paving way into Conservative and Minimally Invasive Procedures, it’s tooth colored restorations contributing to Better Aesthetics and most importantly, the ability of Fluoride Release thus Increasing the overall caries resistance of the tooth.

Over the years Shofu has been constantly involved in strenuous Research & Development inorder to improve the overall Physical and Optical properties of Glass Ionomer cements to best achieve Fucntional & Aesthetic Harmony. Thus the journey which started with Conventional Type II Cements went through a new revolution with the introduction of Strongly Adhesive and Aesthetically superior Type IX and Reinforced High Strength GIC’s which is the need of the hour.

9

Benefits :• Chemically bonds to enamel and

dentin for a complete seal• Higher compressive and tensile

strength• Easy to mix with excellent handling

characteristics• Co-efficient of thermal expansion

similar to natural tooth• High fluoride release and recharge• Radiopaque and biocompatible

Indications :

• Specially designed for Class III, Class V, Cervical Erosion / Abrasion

• For pedodontic restorations

Shade Availability :

Yellow Brown

Packaging :

15g Pow, 8ml Liq, Matrix stips x 20, Cocoa Butter 1g, Measure scoop, Mixing Pad & Spatula

CONVENTIONAL TYPE II RESTORATIVE CEMENT WITH IDEAL PHYSICAL PROPERTIES

Ordering Information :

Glasionomer Version 2 Improved Set

SHADE PN

Yellow Brown 3263

GLASIONOMER CEMENT VERSION 2 IMPROVED


With the advent of ART techniques and with the need of restorative cements with Greater Adhesive properties, Increased Mechanical strength and Enhanced Optical properties, The Type IX family of Glass Ionomer cements was developed and well accepted Globally. Shofu introduced the GlasIonomer FX-II Improved as the conventional Type IX GlasIonomer and furthur research led to the development of the FX-Ultra with enhanced Mechanical & Optical properties.

Shade Availability:

A2, A3, A3.5, B2

Packaging :

15g Pow, 8.4ml Liq, Measure scoop, Matrix stips x 20,

Cocoa Butter 1g, Mixing Pad & Spatula

Benefits :• Superior mechanical properties• Optimal aesthetics with easy

polishability• Exceptional handling characteristics• Continuous release and recharge

of fluoride ions, Biocompatible and radiopaque with low solubility

• Packable & Easy to use


GlasIonomer FX II Improved Set

Indications :

• Restoration of pits and fissures, cervical erosion and abrasion

• Intermediate restoration for heavy stress bearing areas

• Final restoration for non-stress bearing Class I & II in adult dentition

• ART and Minimal Intervention (MI) dentistry

• Geriatric and Pediatric restorations

TYPE IX RESTORATIVE CEMENT PROVIDING IDEAL MECHANICAL PROPERTIES

SHADE PN

A2 3245

A3 3246

A3.5 3247

B2 3248

GLASIONOMER FX-II IMPROVED

10

11


Glasionomer FX Ultra

Indications :

• Ideal paediatric & Geriatric restorative

• Non load bearing class I & II cavities

• Class III & V cavities including cervical erosions, root abrasions and wedge shaped defects

• Provisional restorations

• Bases, core buildup and sandwich restorations

• ART & minimally invasive restorations

Packaging:

15g Pow, 8ml Liq, Measure scoop, Matrix stips x 20, Cocoa Butter 1g, Mixing Pad & Spatula


A2, A3, A3.5, B2

Benefits :• Remarkable translucency for an easier

shade match and better aesthetics • Superior mechanical properties for

durable posterior restorations• Good wettability of powder and liquid

assures an easy and fast mix• Superior handling qualities with adequate

working time and a sharp-set reaction• Low solubility and acid erosion• Significant fluoride release and recharge• Easy to pack and adapt

Its truly Self Adhesive nature, Enhanced Mechanical Strength adding up to its Bulk Filling Property and Excellent Translucency to blend with the Natural Tooth makes it an ideal Type IX Restorative Cement with a wide range of Indications.

Contains a Unique, Optimally balanced Formulation which provides an Ideal Aesthetic and Functional Harmony thus Outperforming conventional restoratives in its Class.

HIGH STRENGTH TYPE IX RESTORATIVE CEMENT WITH ENHANCED AESTHETICS

GLASIONOMER FX ULTRA

SHADE PN (15g)

A2 1120

A3 1121

A3.5 1122

B2 1123



Glasionomer FX Ultra Mini

Indications :

• Ideal paediatric & Geriatric restorative

• Non load bearing class I & II cavities

• Class III & V cavities including cervical erosions, root abrasions and wedge shaped defects

• Provisional restorations

• Bases, core buildup and sandwich restorations

• ART & minimally invasive restorations


A2, A3

Benefits :• Remarkable translucency for an easier

shade match and better aesthetics • Superior mechanical properties for

durable posterior restorations• Good wettability of powder and liquid

assures an easy and fast mix• Superior handling qualities with adequate

working time and a sharp-set reaction• Low solubility and acid erosion• Significant fluoride release and recharge• Easy to pack and adapt

Its truly Self Adhesive nature, Enhanced Mechanical Strength adding up to its Bulk Filling Property and Excellent Translucency to blend with the Natural Tooth makes it an ideal Type IX Restorative Cement with a wide range of Indications.

Contains a Unique, Optimally balanced Formulation which provides an Ideal Aesthetic and Functional Harmony thus Outperforming conventional restoratives in its Class.

HIGH STRENGTH TYPE IX RESTORATIVE CEMENT WITH ENHANCED AESTHETICS

Packaging:

10g Pow, 5.2ml Liq (6.5g),

Measure scoop

SHADE PN (10g)

A2 1125

A3 1126

GLASIONOMER FX ULTRA MINI

SILVER REINFORCED RESTORATIVE GLASS IONOMER CEMENT WITH EXCEPTIONAL MECHANICAL PROPERTIES

Contains a Homogenous Mix of Silver-Tin Alloy particles Reinforced in a specially formulated GlassIonomer Powder, providing exceptional Handling and Physical Properties even under Humid conditions.

Benefits :• Silver reinforced for high compressive

strength to prevent cuspal flexure under large composite restorations

• Lighter grey shade than the other silver reinforced GIC’S available in the market

• Excellent adhesion to tooth structure, pins and amalgam

• Easy to mix and handle• Silver powder is premixed for easy

homogeneous mixing• Packable and condensable• Radiopaque, with high fluoride release

and resistance to erosion


Hi-Dense XP Eco Pack

Indications :

• Ideal permanent restorative for posterior deciduous teeth and non-stress bearing permanent restorations

• Core build-up and structural base

• Repair of amalgam restorations

Packaging :

Eco Pack - 30g Pow, 10ml Liq,

Measure scoop

SHADE PN

30g 3123

13

HI-DENSE XP


Indications :

• Class I & II cavities

• Structural base in sandwich restoration

• As long term temporary replacement for cusps

• As strong core under all indirect restorations

• Paediatric & Geriatric restorations

• Excellent for ART techniques

Packaging :

12g Pow, 5ml Liq,Measure scoop,

Mixing Pad, Spatula

Benefits :• Remarkable edge strength and

excellent marginal adaptation• Self-adhesive with tooth-like co-

efficient of thermal expansion• Sustained fluoride protection,

especially in cases with high caries risk

• Excellent mixing & handling qualities

• Higher translucency for a closer match to natural tooth

• Durability like silver amalgam without the hazard of mercury

• Excellent resistance to abrasion & erosion

Shade Availability:

Universal Shade

A unique class of Restorative Glass Ionomer with reinforced Nano-sized Zirconia fillers that exhibits the Strength and Durability of Conventional Amalgam Restorations without the Hazards of Mercury while providing sustained fluoride protection.

ZIRCONIA REINFORCED RESTORATIVE GLASS IONOMER CEMENT WITH PHENOMENAL STRENGTH


Zirconomer Improved

SHADE PN

Universal 3130

ZIRCONOMER IMPROVED

15

LIGHT CURED RESIN COAT FOR ENHANCEMENT OF OPTICAL AND MECHANICAL PROPERTIES OF TOOTH COLORED DIRECT RESTORATIONS

Self Adhesive Resin coat to provide a perfect Seal on the surface of GlassIonomers for enhanced mechanical properties.

Benefits :

• Excellent seal between the film and substrate with virtually no Gap.

• Easily and completely cured to a natural gloss with both LED & halogen light curing units without any residual uncured monomers.

• Increases flexural strength of underlying restoration upto 10 Mpa.

• Remarkable stain resistance with virtually no color difference.Parum

Indications :

Enhancement of

• GlassIonomer restorations

• Composite resin restorations

• Dentin & Enamel

Packaging :

Coat It 6ml Bottle, Disposable Brush Fine x 50 pcs, V-Dish x 25 pcs

Ordering Information :Coat-It

GRAMMAGE PN

6ml Y055

COAT-IT


REFERENCE TABLE FOR RESTORATIVE GIC’S

S.NO

NAME OF CEMENT

GRAMMAGE POW : LIQ RATIO

MIXING TIME

WORKING TIME (From

start of Mixing)

SETTING TIME (From

end of Mixing)

1 GLASIONOMER TYPE 2 VERSION 2

15g Pow : 8 ml Liq 1 : 1 30 – 45 sec

2 min 10 sec 3 min 40 sec

2 GLASIONOMERFX II IMPROVED

15g Pow : 8 ml Liq 1 : 1 30 – 45 sec

1 min 50 sec 3 min 40 sec

3 GLASIONOMERFX ULTRA

15g Pow : 8 ml Liq 1 : 1 45 sec 2 min 20 sec 2 min 30 sec

4 ZIRCONOMER IMPROVED

12g Pow : 5 ml Liq 2 : 1 30 sec 1 min 30 sec 3 min

5 HI DENSE XP 30g Pow : 10 ml Liq 2 : 1 30 sec 2 min 30 sec 3 min 30 sec

17

2. LUTING/CEMENTATION


LUTING CEMENTS WITH THE STATE OF THE ART HY-BOND TECHNOLOGY

Shofu’s luting cements contain the patented HY additives namely tannic acid, zinc fluoride & strontium fluoride which provide the following benefits : -

• Helps seal the dentinal tubules to prevent irritation to the pulp thus minimizing post operative sensitivity

• Improve the overall physical properties of the cements• Reduce decalcification of enamel and dentin

19

GLASSIONOMER LUTING CEMENT WITH ENHANCED DURABILITY AND IDEAL VISCOSITY GIVING IT A WHOLE NEW EDGE

Application of acrylic acid-tricarboxylic acid copolymer based on SHOFU’s proprietary technology provides the GLASIONOMER CX-Smart with a phenomenal thixotropic property by optimizing polymer network formation, thus the overall physical properties are enhanced.

Benefits :

• Optimal density does not allow the setting cement to flow down

• Quicker setting time permits easy removal of the excess cement

• Improved shape retention allows easier handling of the setting cement and provides a cleaner working environment by preventing the cement coming in contact with the surrounding soft tissues

• HY-additive technology provides added benefits by reducing post-operative sensitivity and promotes mineralization of tooth structure

• Excellent resistance to storage conditions exhibiting no significant changes in physical properties especially against variations is humidity

• Low film thickness allows a precise marginal fit & adaptation of the prosthesis

• Exceptional durability with enhanced physical properties such as higher compressive strength and greater acid resistance thus adding to the long term predictable success of the luting cement

Indications :

Permanent cementation of cast metal, porcelain fused to metal (PFM) crown & bridge restorations-Bonding of metal orthodontic appliances

Packaging:

CX-Smart Set:

45g Pow, 25ml Liq, Measure Scoop, Mixing Pad & Spatula

CX-Smart MINI:

15g Pow, 8ml Liq, Measure scoop


HY-BOND GLASIONOMER CX-Smart

SHADE PN (45g Set) PN(15g)

Universal C0017 C0018

HY-BOND GLASIONOMER CX-SMART


GLASS IONOMER LUTING CEMENT WITH THE PATENTED HY-BOND TECHNOLOGY GIVING IT A WHOLE NEW EDGE

Benefits :• Higher compressive and bonding strength• Low film thickness • High flouride release• Long working time with “snap-set” setting

reaction once placed in the mouth, enhances application efficiency

• Easy mixing & excellent handling characteristics

• Biocompatible and Radiopaque• Exhibits low water solubility with the

highest resistance to water contamination at the initial stage

Indications :

• Permanent cementation of cast metal, porcelain fused to metal (PFM) crown & bridge restorations

• Bonding of metal orthodontic appliances

• Ideal for long span PFM bridges

Packaging: Set :45g Pow, 25ml Liq, Measure Scoop, Mixing Pad & Spatula CX-MINI: 15g Pow, 8ml Liq, Measure scoop


HY-Bond GlassIonomer CX

Enhanced GlasIonomer Luting Cement for permanent cementation with excellent marginal seal & minimized Postoperative Sensitivity

SHADE PN (45g Set) PN(15g)

Universal 4067 1193

HY-BOND GLASIONOMER CX

21

HY-BOND RESIGLASS

RESIN MODIFIED GLASSIONOMER LUTING CEMENT (RMGI)

Benefits :• Chemically bonds to tooth structure with

higher bonding strength• Relatively low film thickness• Biocompatible with high flouride release• Minimum odour & virtually no post-

operative sensitivity• Improved fracture toughness and low

solubility• Provides an excellent marginal seal and

prevents micro leakage• Exhibits high translucency• Superior handling and easy removal of

excess cement

Indications :

• Cementation of porcelain fused to metal and metal free crown & bridge restorations.

• Metal inlays and onlays or crowns

• Selected porcelain or resin crown and bridge restorations

• Orthodontic appliances-metal or ceramic brackets

SHADE PN

Universal 1103

Packaging:

15g Pow, 8ml Liq, Mixing pad & Scoop


HY Bond ResiGlass


POLYCARBOXYLATE LUTING CEMENT OFFERING ALMOST ZERO POST OPERATIVE SENSITIVITY

Benefits :• Chemically adheres to tooth structure and

cast metal appliances• Exhibits high adhesive strength• Low solubility and disintegration• Radiopaque, easy to mix and manipulate• Can be placed on freshly cut dentin with

no pulpal irritation• Less technique sensitive due to the tannin-

fluoride additive

Indications :

• Luting agent for cast restorations and orthodontic appliances

Packaging:

60 g, 30ml Liq, Mixing Pad, Spatula


HY-Bond Polycarboxylate Cement

SHADE PN

Universal 1160

HY-BOND POLYCARBOXYLATE CEMENT

23

Benefits :• Offers high compressive strength and

good film thickness with adequate radiopacity

• Seals dentinal tubules and minimizes post operative sensitivity

• Less technique sensitive with superior handling

• Minimized solubility in oral fluids

TRADITIONAL ZINC PHOSPHATE BASED LUTING CEMENT

Indications :

• Traditional luting agent for cementation of cast restorations and orthodontic appliances.

Packaging :

6og Pow, 25ml Liq, Scoop


HY Bond Zinc Phosphate

SHADE PN

Universal 1170

HY-BOND ZINC PHOSPHATE CEMENT


NON-EUGENOL POLYCARBOXYLATE BASED TEMPORARY LUTING CEMENT

Benefits : • Contains the patented Hy-agent additive

with tannin-fluoride that seals dentinal tubules to minimize pulpal irritation

• Ensures easy removal with sufficient adhesive strength for short-term cementation

• Easy to mix, manipulate and apply• Fast setting and easy to clean up• Minimum odour and taste

Indications :

• Temporary cementation of provisional restoration and implant prosthesis

• Indirect pulp capping and temporary sealing of prepared cavities as an intermediate restorative.


HY-Bond Temporary Cement Soft (60 g)

Packaging :

60g Pow, 30ml Liq, Mixing Pad, Spatula

SHADE PN (60 g)

Universal 1176

HY-BOND TEMPORARY CEMENT (SOFT)

25

S.NO

NAME OF CEMENT

GRAMMAGE POW : LIQ

RATIO

MIXING TIME

WORKING TIME (From

start of Mixing)

SETTING TIME (From end of Mixing)

1 HY-BOND GLASIONOMER

CX-SMART

45g Pow : 25 ml Liq

1 : 2 30 - 40 sec 2 min 2 min 30 sec

2 HY-BOND GLASIONOMER

CX

45g Pow : 25 ml Liq

1 : 2 30 – 40 sec 3 min 40 sec

4 min

3 HY-BOND POLYCARBOXY

LATE

60g Pow : 30 ml Liq

1 : 3 Less than 60 sec

3 min 4 min

4 HY-BOND TEMPORARY

SOFT

60g Pow : 30 ml Liq

1 : 2 Less than 60 sec

2 min 10 sec

3 min

5 HY-BOND RESIGLASS

15g Pow : 8 ml Liq

1 : 2 20 - 30 sec 3 min 30 sec

7 min

6 HY-BOND ZINC PHOSPHATE

60g Pow : 25 ml Liq

1 : 4 30 – 40 sec 3 min 6 min

REFERENCE TABLE FOR LUTING CEMENTS


SELF ETCH, SELF ADHESIVE, RESIN BASED DUAL CURE LUTING CEMENT

Benefits :• Durable bond to a range of substrates• Highest level of translucency for aesthetic

cases• Maximum resin polymerization imparts

superior flexural strength, higher resistance to staining and low solubility

• Optimal viscosity makes it easy to use and extremely thin bonding layer (11.8 µ) provides invisible margins

• Assures patient comfort with virtually no post-operative sensitivity

• Effective release of fluoride for sustained anti-cariogenic and anti-bacterial properties

Indications :

• All ceramics inlays, onlays, crown and bridge restorations (eg. Vintage ZR)

• Prosthesis fabricated with precious, semi precious, non-precious alloys including titanium

• Porcelain fused to metal crown and bridge restorations (eg. Vintage pro, Vintage Halo)

• CAD/CAM restorations

• Indirect resin inlays, onlays, crowns and bridges (eg. Ceramage)

• All-ceramic, resin and metal restorations to implant abutments

• Various kinds of metal and resin posts & cores.


BeautiCem SA 9ml

Shade Availability: Clear, Ivory

Packaging:Auto-Mixing syringe 5ml Set : Mixing tips x 10, Step card x 1

Hand-Mix syringe 9ml Set : Mixing Pad x 1, Spatula x, Step card x 1

SHADE Hand Mix Set PN Auto Mix Set PN

Clear 3216 3213

Ivory 3217 3214

BEAUTICEM SA

27

3. DIRECT RESTORATIVE COMPOSITES


“ Bestow flawless Beauty “

PRESENTING THE BEAUTIFIL RANGE OF COMPOSITES

A versatile nano hybrid, fluoride releasing direct aesthetic restorative material, developed using S-PRG (Surface Pre Reacted Glass Ionomer) to provide superior aesthetics with excellent shade match, enhanced handling characteristics and anti-plaque effect while maintaining strength & durability.

29

PRESENTING THE BREAKTHROUGH SRS MONOMER TECHNOLOGY GIVING A WHOLE NEW EDGE TO YOUR DIRECT COMPOSITES

SHADE PN (4 g)

A1 Y2270

A2 Y2271

A3 Y2272

A3.5 Y2273

A4 Y2274

B1 Y2275

B2 Y2276

SHADE PN (4g)

B3 Y2277

C2 Y2278

C3 Y2279

INC Y2282

BW Y2283

A2O Y2280

A3O Y2281

The Novel SRS (Steric Repulsion Structured) molecule is designed to minimize polymerization shrinkage through molecular steric repulsion resulting in a sturdy and stable restoration microstructure. It also exhibits high refractive index which matches that of the radio opaque fillers to optimize light translucency.

Indications :• Direct restorations that require optimum aesthetics and biocompatibility such

as• Direct cosmetic tooth modifications• Diastema Closure• Restoration of class III, IV, and V cavities• BW shade serves to be an excellent Shade for Pedodontic strip crowns

especially while building canine-canine segents• Restoration of cervical erosion and root caries• Restoration of Class I and selective Class II cavities• Repair of fractured incisal edges • Laminate veneers and core build-up


14 Shades

A1, A2, A3, A3.5, A4, B1, B2, B3,

C2, C3, INC, BW, A2O, A3O

Packaging : 4g Syringe


Beautifil II LS

BEAUTIFIL II LS

Benefits :• Life-like Aesthetics with easy shade match • Enhanced overall Physical Properties• Low volumetric shrinkage of less than 1% and low

resultant shrinkage stress • Effortless polish to a lasting natural luster • Remarkable stain and wear resistance • Optimal physical properties and clinical durability • Excellent handling qualities & sculptability with long

working time• S-PRG Fillers provides anti-plaque benefits and

continued fluoride protectionOdi apitaspis eos se sandam


A VERSATILE DIRECT AESTHETIC COMPOSITE WITH THE PATENTED S-PRG TECHNOLOGY

Benefits :• Sustainable fluoride release and recharge• Anti-plaque effect• Excellent shade stability• Remarkable Wear Resistance• Light transmission and diffusion properties of natural

teeth• Tooth-like fluorescence• Exceptional radiopacity• Reliable strength and longevity• Ideal handling properties with ease of use one touch

cap system

Indications :

• Direct restorations that require optimum aesthetics and biocompatibility such as

• Direct cosmetic tooth modifications

• Restoration of Class III, IV, and V cavities

• BW Shade serves to be an excellent Shade for Pedodontic strip crowns especially while building canine-canine segents.

• Restoration of cervical erosion and root caries

• Restoration of class I and selective class II cavities

• Repair of fractured incisal edges

• Laminate veneers and core build-up


14 Shades

A1, A2, A3, A3.5, A4, B1, B2, B3, C2, C3, INC, BW, A2O, A3O

Packaging :4.5g Syringe

SHADE PN ( 4.5 g )

A1 1401

A2 1402

A3 1403

A3.5 1404

A4 1405

B1 1408

B2 1409

SHADE PN ( 4.5 g )

B3 1410

C2 1412

C3 1413

INC 1415

BW 1416

A2O 1419

A3O 1420

PACKAGING PN

Kit IN0007

BEAUTIFIL II


Beautifil II

Packaging :

Beautifil II Basic Kit :

Beautifil II 4.5g A1, A2 x 2, A3, B2,

BeautiBond 6ml, V-Dish x 25, Dispo-Brush x 100

31

PRESENTING VALUE BASED ENAMEL COMPOSITES AND GUM COLORED COMPOSITES FOR EXTENDED AESTHETICS

Benefits :Inclusion of nano fillers & specially modified sub micron multi functional organic & glass fillers impart• Exceptional handling characteristics• High abrasion / wear resistance• Stable shades • Effortless and superior polishability with

sustained polish retention for lasting aesthetics.• Value based enamel composites with varying

levels of translucency and natural opalescence for an invisible shade match

• Predictable clinical performance • Long term durability

Indications :

• Correcting & enhancing smiles.

• Direct cosmetic tooth modifications to correct tooth malformations, mild mal alignments and diastemas.

• Restoration of all classes of cavities.

• Restoration of cervical carious and non-carious defects.

• Repair of fractured incisal edges, direct veneers and as core build-up.

• Restoration of receded or missing gums / papilla, cervical defects, root caries / erosion, exposed PFM margins and implant abutments to best achieve the red-white aesthetic balance.

Packaging: 2.5g Syringe


Beautifil II Enamel / Gingiva 2.5g

SHADE PN

ENAMEL

HVT Y2251

T Y2250

LVT Y2252

AM Y2253

SHADE PN

GINGIVA

G-LP Y2256

G-DP Y2257

G-OR Y2260

G-BR Y2259

G-V Y2258


Enamel 4 shades - HVT(High Value Translucent), T(Translucent), LVT(Low Value Translucent), AM(Amber)

Gingiva 5 shades - G-DP(Dark Pink), G- LP(Lite Pink), G-OR(Orange), G-BR(Brown), G-V(Violet)

HVT T LVT AM

G-DP G-LP G-Or G-Br G-V

BEAUTIFIL II ENAMEL & GINGIVA


UNIQUE VISCOSITY, ZERO FLOW COMPOSITE WITH SUPERIOR MEHCANICAL & OPTICAL PROPERTIES

Benefits :• Ideal viscosity that adapts the desired shape .• Non-tacky nature for ease of application.• Unique resin structure assures optimal cure.• Superior mechanical properties enable universal

application.• Efficient injectable delivery to restoration site

that reduces instrumentation and working time.• Life-like optical characteristics for indiscernible

restorations .• Natural opalescence and Fluorescence. • Remarkable radiopacity.• Anti plaque effect.

Indications :

• Class I through class V direct restorations including marginal ridge of class II cavities

• Direct Veneers & core build-up

• Shade / shape Modification in direct and indirect aesthetic restorations

• Restoration of Cuspal and Occlusal topography

• Minimally invasive anterior and posterior restorations

• Geriatric and Pediatric Restoration

• Repair of Composite and Ceramic restoration

• Splinting of teeth


14 Shades

SA0.5, A1, A2, A3, A3.5, A4, B1, B2, C2, SA 0.5O, A1O, A2O, INC, BW

Packaging :

2.2g Syringe,Needle Tips x 5


Beautifil Injectable

SHADE PN

SAO.5 2050

SA0.5O 2051

A1 2052

A1O 2053

A2 2054

A2O 2055

A3 2056

A3.5 2057

SHADE PN

A4 2058

B1 2073

B2 2074

C2 2075

INC 2060

BW 2059

BEAUTIFIL INJECTABLE

33

HIGH STRENGTH INTERMEDIATE FLOW COMPOSITE WITH EXCELLENT HANDLING PROPERTIES

Benefits :• Approved for restorations of all cavity classes• High tensile and flexural strength• Predictable Aesthetics with excellent Shade

match and Superior Polish• Sustainable fluoride release and recharge • Exceptional radiopacity• Specially designed Syringe comes with a

“flow on command “ delivery with pull back mechanism to ensure efficient & hygienic application without any Wastage

• Superior mechanical properties and greater intra oral durability

Indications :

Restoration of -

• Minimally invasive anterior and posterior cavities

• Class I through class V cavities.

• Deciduous restorations

• Effortless sculpting of detailed cuspal and occlusal anatomy.

• Creation of marginal ridge in a Class II cavity

• Repairing composite or ceramic restorations.

• Shade adjustment and modification of direct and indirect restorations

Shade Availability:

SA0.5, A1, A2, A3, A3.5, A4, A2O, A3O, INC, BW, MI, CV

Packaging :

2.2g Syringe, Needle Tips x 5


Beautifil Flow Plus F03

SHADE PN

SA0.5 2013

A1 2014

A2 2015

A3 2016

A3.5 2017

A4 2018

B1 2066

B2 2067

SHADE PN

C2 2068

D2 2069

INC 2023

BW 2024

MI 2026

CV 2027

A2O 2020

A3O 2021

BEAUTIFIL FLOW PLUS F03


MINIMAL / LOW FLOW DIRECT AESTHETIC COMPOSITE

Benefits :• High wear resistance and long-term stability• Sustainable fluoride release and recharge• Remarkable radiopacity• Natural light diffusion• Innovative syringe design with 360º rotary

finger grip


A1, A2, A3, A3.5, A4 , A3O, G

Indications :

• A Variety of minimal lesions such as class I,III & V cavities (minimal intervention)

• Root caries & Enamel defects

• Deciduous dentition

• Base & Liner under Direct restorations

• Shade adjustment & modification of direct restorations

• Blocking undercuts

• Repair ceramic or composite veneers

• Adhesive cementation of Laminate veneers

Packaging :

2g Syringe and Needle Tips x 5


Beautifil Flow F02

SHADE PN

A1 1431

A2 1432

A3 1433

A3.5 1434

A4 1435

A3O 1449

G 1451

BEAUTIFIL FLOW F02

35

MAXIMUM / HIGH FLOW DIRECT AESTHETIC COMPOSITE

Benefits :• High wear resistance and long-term

stability• Sustainable fluoride release and

recharge• Remarkable radiopacity • Natural light diffusion • Innovative syringe design with 360º rotary

finger grip

Indications :

• Ideal for areas where Accessibility is minimal such as Gingival Box of Class II cavities

• A Variety of minimal lesions such as class I - III & V cavities (minimal intervention)

• Root caries & Enamel defects

• Deciduous dentition

• Base & Liner under Direct restoration

• Shade adjustment & modification of direct restoration

• Blocking undercuts

• Repair of ceramic or composite veneers

• Adhesive cementation of Laminate veneers

• Can alsobe used as pit and fissure sealant

Shade Availability:

A1, A2, A3, A3.5, A4, A3O, A3T

Packaging :

2g Syringe, Needle Tips x 5


Beautifil Flow F10

SHADE PN

A1 1461

A2 1462

A3 1463

A3.5 1464

A4 1465

A3O 1479

A3T 1482

BEAUTIFIL FLOW F10


Benefits :

• Fluoride releasing Opaque Composite

• Unique Flowable Viscosity• Available as “Universal Opaque” and

“Light Opaque” • Offers high coverage even with a thin

layer

Indications :

• To mask variety of discolorations

• Restoring deep cavities with affected dentin

• Mask metal alloys, particularly useful during Ceramic repair where there is inner metal exposure

Shade Availability:

UO ( Universal Opaque ),

LO ( Light Opaque )

Packaging :

2g Syringe & Needle Tips x 5Ordering Information :

Beautifil Opaquer

OPAQUER COMPOSITE WITH AN IDEAL VISCOSITY TO MASK VARIOUS DISCOLORATIONS

SHADE PN

UO 1363

LO 1364

BEAUTIFIL OPAQUER

37

Benefits :• Low polymerization shrinkage and

shrinkage stress• Excellent depth of cure of upto 4mm• Optimal translucency, exhibits

“chameleon effect” which basically blends the composite to the remaining tooth structure and excellent optical characteristics add to its remarkable shade match

• High radiopacity and superior mechanical properties

• Anti plaque effect• Exhibits optimal condensability and

sculptability for posterior restoration with minimal shade difference pre and post cure

• Exceptional Mechanical strength

Indications :

• Direct posterior restoration including occlusal surface, class I & class II cases

• Core build up

• Deciduous restorations

Shade Availability:

Universal U & A

Packaging :

4.5g Syringe


Beautifil-Bulk

SCULPTABLE BULK FILLING COMPOSITE WITH A UNIQUE FILLER STRUCTURE AND RESIN CHEMISTRY

SHADE PN

U 2034

A 2035

BEAUTIFIL - BULK RESTORATIVE


BULK FILLING, DENTIN REPLACEMENT COMPOSITE WITH A UNIQUE FLOWABLE CONSISTENCY

Benefits :• Low polymerization shrinkage and

shrinkage stress• Excellent depth of cure of upto 4mm• Optimal translucency with excellent

optical characteristics for remarkable shade match

• High radiopacity and superior mechanical properties

• Anti-plaque effect • Excellent internal adaptation with self

- levelling nature to simplify restoration process and eliminate voids

Indications :

• As a strong bases under class I & II

• Liner under direct resin restorations

• Small posterior restorations

• Undercut block out

• Minor repair of defects of direct resin restorations

• Deciduous restorations.


U ( Universal ),

D ( Dentin )

Packaging :

2.4g Syringe, Needle tips x 5


Beautifil-Bulk Flowable

SHADE PN

U 2030

D 2031

BEAUTIFIL BULK FLOWABLE

39

FLUORIDE RELEASING PIT & FISSURE SEALANT WHICH PROVIDES ALL ROUND PROTECTION FROM CARIES

Benefits :• High shear bond strength without

phosphoric acid etch• Self etch primer with dual adhesive

monomers penetrates deep into pits and fissures for a long lasting chemical bond

• Ideal handling and viscosity with bubble-free consistency

• Radiopacity equal to dentin • Unique cariostatic properties of S-PRG

fillers• Short application time of 30 sec• Unique syringe design with non-drip

mechanism prevents oozing and wastage of excess material

• BPA and HEMA-free

Packaging :

Set :

BeautiSealant Paste 1.2g, Primer 3ml, Needle Tips x 5, Micro Brush Fine x 50, V dish x 25

Indications :

To seal Deep grooves, its & fissures

Refills :

BeautiSealant Paste 1.2g BeautiSealant Primer 3ml


BeautiSealant

PACKAGING PN

Set 1796

Paste 1799

Primar 1800

BEAUTISEALANT

41

4. PRIMING & BONDING SYSTEMS


Indications :

• To increase efficiency and ensure a reliable bond between composite and natural tooth structure

• Particularly plays an efficient role in areas where there is maximum dentin exposure

PACKAGING PN

Set 1781

Packaging:

BeautiBond 6ml, V-dish x 25,

Applicator tips x 50, Handle x 1

THE “ALL IN ONE” - ONE STEP BONDING SYSTEM WITH A UNIQUE DUAL ADHESIVE MONOMER TECHNOLOGY

Benefits :• Single Step Application procedure • Short application time of 30 sec saves

chair time• HEMA free formulation eliminates post-

operative sensitivity• Provides stable & durable bond • Dual adhesive monomers ensures secure

bond to enamel and dentin• Minimized gingival blanching• Predictable Success even with a Thin

bonding layer• Thin bubble free bonding layer of 5

micron• Facilitates easy adaptation of restoration


BeautiBond Set

BEAUTIBOND

43

TWO STEP BONDING SYSTEM (SELF ETCH PRIMER + BONDING AGENT) WITH THE PATENTED S-PRG TECHNOLOGY

Benefits :• Simple and quick 2-step handling • Optimal viscosity and adhesion• Ideal Radiopacity for accurate diagnosis• Inclusion of 40% specially modified

S-PRG fillers facilitate release of cariostatic fluoride, controls bacterial colonization and increases acid resistance for a durable performance.

• Excellent bond strength• Short application time of 35 sec• HEMA & acetone free primer minimizes

odour and post operative sensitivity

Indications :

• Restoration of deep cavities

• FL-BOND II is recommended for bonding any composite to enamel and dentin during restorative procedures

• Restoration of hypersensitive and exposed root surface

• Intra oral repair of fractured indirect restorations when used with M.L. Primer(Metal-Link Primer) and Cera Resin Bond 1 (Porcelain Primer)

Packaging :Primer 5ml, Bonding Agent 5ml,Micro applicators, Dish with cover and step card

Ordering Information :FL-Bond II Set

PACKAGING PNSet 1306

FL-BOND II


A UNIQUE INNOVATION TO PROVIDE A STABLE AND DURABLE BOND WITH ZIRCONIA RESTORATIONS

Indications :

• For adhesive bonding of porcelains compatible with Zirconia

Packaging :

Bottle of 5ml


AZ Primer

Benefits :• Exclusively developed for the modern

materials zirconia and alumina• The 6-MHPA monomer, specially adapted

for high performance porcelains, anchors itself permanently to the restoration

PRIMING METAL SURFACE TO BEST RECEIVE A MASKING RESIN MATERIAL

A single bottle Metal bonding Primer, which enhances the bonding of resin materials to a wide variety of dental metals such as semi-precious, precious and non-precious metal.


M.L. Primer

Packaging : Bottle of 5ml

PACKAGING PN

5 ml 3232

PACKAGING PN

5 ml 1740

AZ PRIMER

M.L. PRIMER

45

Contains Silane Coupling agent to Prime feldspathic Porcelain and Indirect composite restorations to enhance Bond strength during Intra oral cementation or repair of restorations.

IDEAL, EASY TO APPLY SILANE COUPLING AGENT TO INCREASE BOND STRENGTH OF RESIN MATERIALS OVER PORCELAIN

Packaging : Bottle of 5ml


Porcelain Primer

ASSORTMENT OF PRIMERS AND BONDING AGENT FOR REPAIR OF PORCELAIN WITH OR WITHOUT METAL EXPOSURE

New Versatile light-cure bonding system that can be used clinically for the repair of fractured ceramic or indirect composite restorations intra-orally even when metal is exposed and chairside adjustment and repair of prosthesis.

Consists of

• M.L. Primer - Metal link Primer to enhance bond between Resin materials a wide variety of Metal alloys

• Cera Resin Bond 1 : Acts as a Silane Coupling agent

• Cera Resin Bond 2 : Bonding Agent That creates a strong & durable bond


P & R Repair Kit

Packaging:

M.L. Primer 5ml, CRB1 6ml , CRB2 5ml, Micro Brushes ( Pink & Yelloow x 25 eac ), Dispo dish x 5

PACKAGING PN

5 ml 3234

PACKAGING PN

Set 1739

PORCELAIN PRIMER

P & R REPAIR KIT


A 2 step light cure bonding system specifically designed to repair fractured porcelain or indirect composite resin restorations.

It provides an excellent Bond between Ceramic and Resin restorations.

Cera Resin Bond 1 (CRB 1) - acts as Silane Coupling agent

Cera Resin Bond 2 (CRB 2) - bonding agent which provides a thin, transparent layer with a strong and durable bond for the resin

Packaging :

CRB 1 : 6ml, CRB2 : 5ml, Microbrushes x 25 each (pink&yellow), Instructions, Dispo Dish x 5


Cera Resin Bond Set

PACKAGING PN

5 ml 1741

CERA RESIN BOND SET

47

5. ABRASIVE SYSTEM KITS


Finishing & polishing of restorations forms an important step that contributes to the overall predictable Success of the restoration and in achieving the desired functional and aesthetic harmony.

Shofu has been the leader globally with our state of the art abrasive technology, developing finishing / polishing sequences for a variety of restorative materials with Advanced Abrasive Impregnation methods and their hygienic organization to perform efficient procedures both intra orally or chair side.

“QUALITY IN EVERY TURN”

49

DIRECT COSMETIC RESTORATION KIT

CAREFULLY ASSORTED MINIMALLY INVASIVE DIAMOND POINTS FOR PRECISE DIRECT VENEER PREPARATION

Benefits :• The kit offers unique shapes of diamond

points for depth orientation, minimally invasive cavity preparation and direct veneer preparation

• The Diamond Points are hygienically organized in an aluminum bur block (autoclavable) for convenient sterilization and easy replacement

Indications :

• Direct veneer preparatioon

• Contouring / Fine finishing of direct cosmetic restorations

• Minimally Invasive cavity preparation

Packaging :

Diamond points FG x 8 (regular, fine and superfine)


Direct Cosmetic RESTORATION KIT

PACKAGING PN

Kit F272


SELECTIVELY ASSORTED DIAMOND POINTS FOR PRECISE TOOTH PREPARATION FOR CROWN & BRIDGES

Benefits :• Precise depth orientation grooves can

be achieved easily with the specially designed depth cutting diamond points

• 2 special “Tissue-protective end-cutting burs” for shoulder preparation and finishing under gingival margins without injuring the soft tissue

• These points are hygienically organized in an aluminium bur block (autoclavable) for convenient sterilization and easy replacement

• 14 kinds of specially selected FG diamond Points in 3 different grits Regular (No marking on shank) Fine (Red band on shank) Super Fine (Yellow band on shank)

Indications :

A careful Assortment designed To offer Fast, Simple and Accurate tooth Preparation For a wide Variety of Crown & Bridge restorations, Veneers and Onlays.

Packaging:

Diamond Points FG x 14 (Regular, Fine, Super fine)


Crown & Bridge PREPARATION KIT

PACKAGING PN

Kit F270

CROWN & BRIDGE PREPARATION KIT

51

Benefits :• A careful selection of a total of 17 burs for

speedy, simple and accurate all-ceramic preparation work

• 2 specially designed depth cutting burs to achieve precise depth orientation grooves for accurate labial reduction during crown and veneer preparation

• Sequenced grades of 2 grits Regular:(no marking on the shank) Super-Fine:(yellow band on the shank)

• All 17 burs are placed in a hygienically organized bur stand for convenient storage and easy replacement

Indications :

• The kit is specially created with an exclusive range of diamond burs for simple, efficient and accurate tooth preparation for full-ceramic, inlay/onlay and veneer restorations.

Packaging :

Diamond points FG x17 (regular and superfine)


All Ceramic PREPARATION KIT

PACKAGING PN

Kit 0955

ALL CERAMIC PREPARATION KIT


A COMPREHENSIVE , COLOR CODED , DISPOSABLE DISC/POLYSTRIP SYSTEM FOR COMPOSITE FINISHING AND POLISHING.

Benefits :• Discs are extremely thin and highly

flexible • No metal centre • Consistent 4-step contouring, finishing

and polishing & Super polishing system • Coordinated polishing strips for

interproximal areas • No gouging of enamel or restoration • Secure hold of the disk onto the mandrel

(maximum control during polishing)• Disk come in 12mm and 8mm diameter

Indications :

For Contouring, finishing, polishing and super polishing of Anterior composite restorations

• Contouring : Super-Snap disk black (coarse).

• Finishing : Super-Snap disk violet (medium

• Polishing: Super-Snap disk green (fine)

• Super polishing: Super-Snap disk Red (superfine)

• For interproximal finishing and polishing use Super Snap Polystrips.

Packaging :

Super-Snap Rainbow Kit Discs x 180, Poly Strips x 40, Dura White Stones CA x 2, CompoSite Fine CA x 1 and CA Mandrel x 4

Refills: Individual Discs Regular/Mini in Box of 50’s


SUPER-SNAP RAINBOW KIT

PACKAGING PN

Kit 0500

Black L506

Black Mini L507

Violet L528

Violet Mini L522

Green L501

PACKAGING PN

Green Mini L519

Red L502

Red Mini L521

MANDRELS

6 pc 0439

SUPER-SNAP RAINBOW KIT

53

Designed as introductory kit with all the color coded Grits (Black, Violet, Green & Red) in 12mm and 8mm Diameter

Packaging :

Discs x 48, CompoSite fine x 1, CA Mandrel x 1


Super-Snap Mini Kit

PACKAING PN

Kit 0505

SUPER-SNAP MINI-KIT

SUPER SNAP POLYSTRIPS

Polyester Strips for contouring , finishing , polishing and super polishing inter proximal areas of composite restorations

Packaging :

Black/Violet box of 100

Green/Red box of 100


Super-Snap Polystrips Box of 100

PACKAING PN

Black/ Violet L525

Green/Red L526


AN ADVANCED 3D COATED DISC SYSTEM FOR ENHANCED COMPOSITE POLISHING AND SUPER POLISHING.

A Comprehensive New Technique kit comprising of the color coded, proven Super-Snap Black Disc (Contouring), Violet Disc (Finishing) and Novel Super-Snap X-TREME Green Disc (Polishing), Red Disc (Super-Polishing).

Benefits :• Multi dimensionally coated disc system

which are resilient yet flexible allow greater tactile feel to achieve a natural lustre at ease indicated for polishing and super polishing of composites

• With the 3D polishing technology the green & pink discs facilitates efficient discharge of ground debris and heat dissipation for a faster and easier polish with virtually no clogging or secondary scratches

Packaging :

• Super snap X-TREME Technique Kit : Discs x 160, Poly Strips x 40, Dura White Stones CA x 2, CompoSite Fine CA x 1 and CA Mandrel x 4

• Super Snap Xtreme Mini Kit : Discs x 48, CompoSite fine x 1, CA Mandrel x 1

PACKAGING PN

X-TREME Kit 0508

X-TREME Mini Kit NO509

Refills

X-TREME Green Discs

L511

X-TREME Green Mini

L531

X-TREME Red Discs

L512

X-TREME RED Mini

L532


SUPER -SNAP X-TREME KIT

Refills : Fine Green/ Green Mini discs x

50 Super Fine Red/Red Mini discs x 50

SUPER -SNAP X-TREME KIT

55

ONE GLOSS SET

ONE STOP SOLUTION FOR FINISHING & POLISHING OF DIRECT RESTORATIONS

Benefits :• Aluminium Oxide impregnated Silicone

points provide Optimal Abrasive Performance

• Finishing & Polishing with only one Instrument just by altering the Contact Pressure ( Finishing - 1N , Polishing - feather touch 0.3 n )

• Eliminates the need of Polishing Paste• Low Vibrations and minimal Heat

Generation

Indications :

• For Finishing and Polishing of Composite and GlassIonomer restorations

• For removal of excess cement without marring delicate inlays, as well as for the removal of Surface Stains

• After orthodontic bracket debonding inorder to remove the excess bonded cement without decalcifying the enamel

• Polishing of enamel after Scaling

• Creating Surface textures on direct cosmetic restorations

Packaging :

Box of 60 , 20 of each shape (Cups, MidI, Inverted Cone IC) and CA Mandrels x 3

Refills :

Individual Shapes as Box of 50’s

Mandrels as box of 6

Mini Points Box of 12’s


ONE GLOSS SET

PACKAGING PN

Kit 0180

Refills

Cups 0181

Midi 0182

Inverted Cone IC 0183

Mandrels 0435

Mini Points 0186


BUFFING SYSTEM FOR ENHANCED POLISH AND LUSTURE

Buffing is an important part of Abrasive Procedures and involves production of Micro Fine scratches over the restoration thus producing extra lustre and enhancing the overall composure of the restoration

Benefits :• Felt disc retains polishing paste with

minimum splatter or wastage during use • Requires feather light touch to produce a

high gloss polish • Flexible yet resilient discs easily adapt to

natural contours of tooth surface• Absence of metal center or exposed

mandrel prevents gouging or discoloration of Tooth/Restoration

• Available in 2 sizes : 12mm & 8mm

Indications :

Specially designed buff disc made of synthetic felt polishing cloth for buffing of

• Composites,

• Porcelain,

• Acrylic Teeth and

• Gold Restorations

Packaging :

Regular / Mini

Box of 25, CA Mandrel x 1


Super-Snap Buff Disc

PACKAGING PN

Regular L523

Mini L524

SUPER-SNAP BUFF DISC

57

DIAMOND IMPREGNATED POLISHING PASTE FOR INTRA ORAL HIGH GLOSS POLISH

Benefits :• Made of micro fine synthetic Diamond

particles (2-4 microns in size)• The lime Flavor and Odor of the paste

serves to be comfortable for the patient during the buffing procedure

• Ideal consistency facilitates easy application and use

Indications :

• Designed for superior polishing of natural teeth after cosmetic contouring as well as porcelain composite, metal and acrylic restorations

• Ideally used along with super snap buff disc to produce excellent lustre over direct resins, ceramics and also acrylic teeth

Packaging:

3g syringe, Application tip x 2

PACKAGING PN

Syringe 0558


Direct Dia Paste

DIRECT DIA PASTE


ADVANCED IMPREGNATED BUFF SYSTEM FOR ENHANCEMENT OF DIRECT COMPOSITE RESTORATIONS WITHOUT USE OF ANY POLISHING PASTES

Specially designed aluminium oxide impregnated felt discs with easy to use snap on system for super polishing direct resins.

Benefits :• Impregnated in the disc ensures faster

polishing while keeping the work area clean • Discs can be soaked in water until soft and

flexible to activate polishing compound just before use

Indications :

Buffing of Direct Composite Restorations inorder to attain high lustre and surface gloss

Packaging :

Super Buff Set : Box of 25 discs and CA Mandrel x 2

Refills : Box of 50’sOrdering Information :

Super-Snap Super-Buff set

PACKAGING PN

Set 0535

Refills 0536

SUPER - SNAP SUPER-BUFF SET

59

CONCISED KIT WITH ASSORTED STONES FOR PRECISE FINISHING OF DIRECT COMPOSITE AND GLASS IONOMER RESTORATIONS

Benefits :• Consists of coarse dura green (silicone

carbide) stones for contouring and fine dura white (aluminium oxide) stones for finer finishing.

• Available in both contra angled hand piece mandrel (CA) & aerotor mandrel (FG

• Autoclavable stones which are durable and long lasting

Indications :

Designed for contouring and finishing direct resin and glass ionomer restorations

Packaging : Kit CA / FGDura-Green 3 each CN1 & FL2 for adjusting

Dura white stones 3 each CN1 & FL2 for finishing


Composite Finishing Kit

PACKAGING PN

Kit CA 0306

Kit FG 0302

COMPOSITE FINISHING KIT CA/FG


SELECTIVE ASSORTED STONES AND POLISHERS FOR FINE FINISHING AND POLISHING OF DIRECT COSMETIC RESTORATIONS

Benefits :• The durable abrasive points are

autoclavable and cost-effective• Comprehensive selection of points for

finishing and polishing in one kit• For fast and efficient finishing the

use of composite finishing kit FG is recommended in conjunction with the composite polishing kit

Packaging :

Dura-Green stone CA x 2, (CN1 & FL2) for contouring

Dura-White stones CA x 2, (CN1 & FL2) for finishing

CompoSite polishers CAx4 for pre polishing

CompoSite fine polishers CAx2, (Cup & Disc) for super polishing

Indications :

Comprehensive assortment of finishing and polishing of direct resins and glassIonomers.


Composite Polishing Kit

PACKAGING PN

Kit CA 0310

COMPOSITE POLISHING KIT CA

61

ADVANCED DIAMOND IMPREGNATED ABRASIVE SYSTEM FOR ENHANCED FINISHING, PRE POLISHING & SUPER POLISHING OF COMPOSITE RESTORATIONS

Benefits : • Uniformly blended diamond particles

in a resilient silicone offers precise concentricity and produce remarkable lustre and gloss over the restoration giving it life like aesthetics

• This diamond impregnated silicone polisher is available in two grits:

• Provides a simple, fast and efficient polishing and super polishing for intra oral, chair side or laboratory use

• Durable and cost effective two-step polishing system, available in HP and CA shank

• Eliminates the need of any messy polishing paste

Indications :

High end polishing of direct & indirect composite restorations

Packaging :

CA/HP Assortments

CompoMaster Coarse assorted box of 4 (Bullet, Knife, Cup & Mini-Point)

Compomaster assorted box of 4 (Bullet, Knife, Cup & Mini-Point)


CompoMaster Assortment

PACKAGING PN

Coarse CA 115C

Regular CA 0115

Coarse HP 120C

Regular HP 0120

CompoMaster Coarse (yellow polisher) - For finishing & basic polishingCompoMaster Regular(yellow & white bands) - For superpolishing

COMPOMASTER ASSORTMENT


SPECIALLY DESIGNED FOR SYSTEMATIC POLISHING OF INDIRECT COMPOSITES

A careful selection of trimming, finishing and polishing instruments for a precise functional and aesthetic enhancement of indirect composites. (CERAMAGE)

Packaging :

• The Kit contains :

• Robot Carbide Fissure Bur HP

• Silicone Points HR 2 each of 11, 13S & 2 pcs of 28

• Shofu Pivot Brush x 1

• Shofu Pivot Brush SC x 1

• Shofu Mandrels x 2

• Dura-Polish 20g x 1 jar

• Dura Polish Dia 5g x 1 jar

• Shofu Felt Wheels x 3 No. 1602 (16mm diameter, 2mm thickness) x 2 & No.2405 x 1 (24mm diameter, 5mm thickness)


Ceramage Polishing Kit

PACKAGING PNKit 5948

CERAMAGE POLISHING KIT

63


Dura-Polish

An aluminium oxide impregnated (73% by weight) polishing wax that imparts a homogenous surface on a range of restorations.

Benefits :• Pre polishes indirect composite materials

efficiently due to its high degree of abrasiveness and specific particle size

• Inclusion of three different grit of alumina particles ensures that scratches are eliminated easily

• Adhesive character of the paste ensures maximum surface contact

• Optimal paste viscosity minimizes splattering

Indications :

• Designed for pre polishing of indirect composite restoration and super polishing hard resin, denture base resin and all kinds of dental metals.

• For extra oral use, used best with Robinsons brush/buff wheels in HP shank

Packaging

Packed in a jar of 20g

Recommended Speed Range :

Max 10,000 rpmPACKAGING PN

20 g 0552

DURA-POLISH


A Diamond Impregnated (67% by weight) Polishing wax for High Lustre Polish.

Benefits :• Composed of a High density of Ultra

Fine diamond particles (less than 1micron in size) for excellent results

• Special Formulation of the Polishing wax assures that Dura-Polish Dia is easy to apply on the brush or Buff and also retains for a long time for efficient Polishing

• Optimal Paste viscosity minimizes splatter

Indications :

• Designed to provide a consistent and exceptionally High Gloss polish on Indirect composites, Porcelain and Zirconia as well as Hard Resins and alloys

• For extra oral use, used best with Robinsons Brush/Buff Wheels in HP Shank

Packaging

Packed in a jar of 5g


Dura-Polish Dia


Max 10,000 rpm

PACKAGING PN

5 g 0554

DURA-POLISH DIA

65

CONCISED ASSORTED KIT FOR FINISHING & POLISHING OF PORCELAIN RESTORATIONS

Benefits : • Helps eliminate the tedious re-firing

process• Saves time by avoiding the restoration

being sent to the Lab for re-glazing, which may affect the Porcelain colour or metal framework of the restoration

• Prevents the inconvenience of a recall appointment for the patient

• The Dura White (aluminium oxide) stones are initially used for adjustments and followed by sequential use of Ceramiste points (silicone impregnation) and using the white banded fine point finally for polishing

Indications :

Assortment of white stones and porcelain polishers for chair side adjustment and glaze like polishing of porcelain restorations prior to placement

Packaging :

Dura-White stones HPx3 for adjusting and finishing [ CN1, FL3 & RE1 ]

Ceramiste points HPx9 Standard , Ultra and Ultra II grits for polishing [ KN7, PC2 & WH6 ]


Porcelain Adjustment Kit

PACKAGING PN

Kit HP 0301

PORCELAIN ADJUSTMENT KIT


ASSORTED KIT DESIGNED FOR COSMETIC CONTOURING & SUPER POLISHING OF PORCELAIN AND NATURAL DENTITION

Benefits :• Eliminates the need for re-glazing of the

porcelain restoration, especially after chairside adjustment

• The Dura White (aluminium oxide) stones are initially used for adjustments and followed by sequential use of Ceramiste Points (silicone impregnation) and using the white banded fine point finally for polishing

Indications :

Designed for cosmetic contouring of natural dentition or porcelain and super polishing the adjusted surfaces.

Packaging :

Dura-White stones CA x 3 for adjusting and finishing [ TC1, FL2 & RD1 ]

Ceramiste points CAx9 in standard , ultra and ultra II grits for polishing [ KN7, PC2 & WH6 ]Ordering Information :

Enamel Adjustment Kit

PACKAGING PN

Kit CA 0307

ENAMEL ADJUSTMENT KIT

67

ADVANCED DIAMOND IMPREGNATED POLISHERS FOR ENHANCED GLAZE LIKE POLISHING OF ALL CERAMIC RESTORATIONS

Benefits :• Produces High Gloss because of the

Precise Concentricity with uniform distribution of even sized diamond particles in a resilient silicone compound

• This Unique Formulation ensures efficient performance with low vibration and minimal heat generation reducing the risk of Micro Cracks

Indications :

Three step polishing system specifically designed for all-ceramic restorations including Lithium disilicate and fully contoured Zirconia restorations

ZiLMaster Coarse (green banded shank)

For finishing and pre-polishing.

ZiLMaster Medium (blue banded shank)

For polishing.

ZiLMaster Fine (yellow banded shank) - For super polishing

Packaging :


Zilmaster Finishing and Polishing Kit

PACKAGING PN

Kit S0009

ZILMASTER FINISHING AND POLISHING KIT

ZilMaster Finishing & Polishing Kit (HP) contains :Dura Green Dia - TC4, KN7 & WH6 x 1 eachZilMaster Coarse - Bullet, KN7 & WH6 x 1 eachZilMaster Medium - Bullet, KN7, & WH6 x 1 eachZilMaster Fine - Bullet, KN 7, & WH6 x 1 each


Benefits :The concised assortment offers adequate and efficient armamentarium from an Ideal Preparation to Polishing of Porcelain Veneers

Packaging :

• Diamond points FG and T&F Hybrid points FG x 6 for preparation adjustment & finishing .

• Dura white stones CA for finishing [ RE1 & FL2 ]

• Ceramiste standard CA x 2 for pre-polishing [ Wheel & knife ]

• Ceramiste ultra CA x 3 for polishing [ wheel knife & Cup ]

• Ceramiste ultra II CA x 3 for super polishing wheel, knife & Cup


Porcelain Veneer Kit


COMPREHENSIVE KIT DESIGNED FOR PREPARATION, ADJUSTING, FNISHING & POLISHING OF PORCELAIN VENEERS

PORCELAIN VENEER KIT

69

IDEAL ASSORTMENT FOR ADJUSTMENT & POLISHING OF ACRYLIC DENTURES AND APPLIANCES

Benefits :Easy to use, convenient and efficient- Robot Carbide burs produce High end ,Precise cutting for various adjustments

Indications-

Comprehensive kit that can be used either chairside or in the laboratory for adjusting, fine finishing and polishing denture resin.

Packaging :

Acry point :

• Coarse x 4 (BP1 & PC2 ) x 2 each for adjusting

• Medium x 2 (BP1 & PC2) x 1 each for finishing

• Fine x 2 (BP1 & PC2) for polishing x 1 each

Robot Carbide Burs x 4 for smooth and fast adjustments ( 0620, 0616, 0635, 0867 )

Ordering Information :Acrylic Contouring & Finishing Kit


ACRYLIC CONTOURING & FINISHING KIT

AMALGAM POLISHING KIT CA/FG

FOR EFFICIENT, ENHANCED POLISHING OF SILVER AMALGAM RESTORATIONS

Benefits :• Assortment of abrasives impregnated

with polising compounds to provide fast and brilliant results on amalgam restorations without pumice or tin oxide.

• Available in both Contra Angled and Aerotor Mandrels

• The autoclavable silicone polishers have a long track record and are well known for their efficiency and durability

Packaging :

• Amalgam Polishing Kit CA/FG :

• Brownie cups and midi points x 3 each for pre polishing [ KN7, WH6 & PC2 X 2 each ]

• Greenie cups and midi points x 2 each for polishing [ KN7, WH6 & PC2 X 2 each ]

• Super Greenie cups and midi points x 3 each for super polishing [ KN7, WH6 & PC2 X 2 each ]


Amalgam Polishing Kit CA/FG

PACKAGING PN

Kit CA 0308

Kit FG 0309


NP ALLOY ADJUSTMENT KIT HP

FOR EFFICIENT, ENHANCED POLISHING OF PRECIOUS & SEMI-PRECIOUS METAL ALLOY RESTORATIONS

Benefits :• Available as Straight Handpiece Mandrel for

Laboratory Finshing and Polishing of Gold Restorations and Contra Angled mandrel for intra oral or chair side use

• These popular silicone polishers are autoclavable and known for their durability as well as polishing efficiency

Indications :

An assortment of Brownie, Greenie and Supergreenie points for polishing precious and semi-precious metal alloys to a high-lustre

Packaging :

Gold Polishing Kit HP/CABrownie x 6 for pre polishingGreenie x 3 for polishingSuper Greenie x 3 for super polishing


Gold Polishing Kit CA

PACKAGING PN

Kit CA 0304

Kit HP 0303

GOLD POLISHING KIT HP/CA

FOR EFFICIENT, ENHANCED POLISHING OF NON-PRECIOUS METAL ALLOY RESTORATIONS

Benefits :Lab Series stones are made of pure aluminium oxide for adjusting PFM alloy without any hassle of carbon contamination while Hardies smoothen away fine scratches and assure fast polishing of the metal surface

Indications :

Special assortment of abrasive stones and polishers for chair side adjustments of non precious alloys like Nickel-Chrome & Chrome-Cobalt

Packaging :

Lab series white stones x 10 for adjustingHardie-Black stone x 2 for polishingv


NP Alloy Adjustment Kit HP

PACKAGING PN

Kit 0311

71

S.NO ABRASIVE SYSTEM

TYPE OF MANDREL

COMPOSTION/ IMPREGNATION

STERILIZATION RECCOMEN DED SPEED

WATER SPRAY

1 SUPER SNAP DISCS Contra Angled (CA)

Silicone Discs with Silicon Carbide and Aluminium Oxide Impregnation

NO (Disposable 10,000-12,000 rpm Max 15,000 rpm

Not Needed

2 SUPER SNAP XTREME DISCS

Contra Angled (CA)

Fine Aluminium Oxide Impregnation

NO (Disposable) 10,000-12,000 rpm Max 15,000 rpm

Not Needed

3 ONE GLOSS Contra Angled (CA)

Aluminium Oxide Impregnation


Applicable

4 SUPER SNAP BUFF DISC

Contra Angled (CA)

Synthetic Felt Cloth NO (Disposable) 5,000-10,000 rpm Max 10,000 rpm

Not Needed

5 SUPER SNAP SUPER BUFF SET

Contra Angled (CA)

Aluminium Oxide Impregnated Buff


Moisten Disc before use

6 COMPOSITE FINISHING KIT

Contra Angled (CA)

Dura Green + Dura White Stones

AUTOCLAVABLE 5,000 - 20,000 rpm Max 30,000 rpm

Not Needed

7 COMPOSITE FINISHING KIT

Aerotor (FG) Dura Green + Dura White Stones

AUTOCLAVABLE 50,000- 1,50,000 rpm Max 2,50,000 rpm

Not Needed

8 COMPOSITE POLISHING KIT

Contra Angled (CA)

Dura Green(Silicone Carbide) + Dura White Stones(Arkansas) + CompoSite Polishers(Silicone Imp)

AUTOCLAVABLE 5,000-10,000 rpm Max 30,000 10,000-12,000 rpm Max 15,00

Not Needed

9 COMPOMASTER Contra Angled (CA)

Diamond Impregnated Silicone Polishers

AUTOCLAVABLE 5,000-10,000 rpm Max 20,000 rpm

Not Needed

10 CROWN & BRIDGE KIT

Aerotor (FG) Robotic Diamond Burs AUTOCLAVABLE Less Than 3,00,000 rpm

Applicable


S.NO ABRASIVE SYSTEM

TYPE OF MANDREL

COMPOSTION/ IMPREGNATION

STERILIZATION RECCOMEN DED SPEED

WATER SPRAY

11 DIRECT COSMETIC RESTORATION KIT


Applicable

12 ALL CERAMIC PREPARATION KIT


Applicable

13 PORCELAIN ADJUSTMENT KIT

Straight Hand Piece (HP)

Dura White Stones + Ceramiste (Silicon Imp) Standard, Ultra & Ultra II Stones

AUTOCLAVABLE 5,000 - 20,000 rpm 10,000 - 12,000 rpm

Not Needed

Applicable

14 ENAMEL ADJUSTMENT KIT

Contra Angled (CA)

Dura White Stones + Ceramiste (Silicon Imp) Standard, Ultra & Ultra II Stones

AUTOCLAVABLE 5,000 - 20,000 rpm 10,000 - 12,000 rpm

Not Needed

Applicable

15 ZILMASTER Straight Handpiece (HP) / Contra Angled (CA)

Diamond Impregnation with Silicone as Binder


Not Needed

16 AMALGAM POLISHING KIT

Contra Angled (CA)

Brownie, Greenie & Super Greenie Polishers (Silicone Impregnated)


Applicable

17 AMALGAM POLISHING KIT

Aerotor (FG) Brownie, Greenie & Super Greenie Polishers (Silicone Impregnated)

AUTOCLAVABLE 50,000 - 1,00,000 rpm Max 1,50,000 rpm

Applicable

18 GOLD POLISHING KIT

Straight Handpiece (HP) / Contra Angled (CA)

Brownie, Greenie & Super Greenie Polishers (Silicone Impregnated)


Not Needed

19 NP ALLOY ADJUSTMENT KIT

Straight Handpiece (HP)

Lab Series Stones (Arkansas) + Hardie Black (Silicone Imp)

AUTOCLAVABLE 5,000 - 30,000 rpm Max 30,000 rpm

Applicable

19 ACRYLIC CONTOURING KIT

Straight Hand Piece (HP)

Acry Points + Robot Carbide Burs

AUTOCLAVABLE 5,000- 10,,000 rpm 10,000-15,000 rpm

Not Needed

73

6. SHOFU DIAMOND INSTRUMENT


Diamond points are made by Hi-Tech Robots in a Computer Automated Environment untouched by human hands. Each point is guaranteed with an even distribution of Natural Diamond particles into a single Stainless steel shank to ensure Accuracy and Effortless Cutting Efficiency.

The Diamond points utilize a Multi Coating technique with a special Surface treatment to enhance durability and less clogging while maintaining its working efficiency.

SHOFU DIAMOND INSTRUMENTS

75

FINISHING & POLISHING SEQUENCE (CLINICAL)

Contouring / Finishing Polishing High-Lustre Polishing

Direct Restorations

Composites Dura-GreenDura-WhiteT&F Hybrid Points

OneGlossSuper-Snap, Black / Violet

CompoMaster Coarse

CompoSite Point

OneGlossSuper-Snap GreenSuper-Snap X-treme Green

CompoMaster

CompoSite FineDirectDia PasteSuperBuffSuper-Snap RedSuper-Snap X-treme Red

Amalgam Dura-Green Brownie / Greenie Supergreenie

Glass-Ionomer Cements

Dura-WhiteT&F Hybrid PointsOneGloss

CompoSite Point

OneGloss

CompoSite Fine

Inlays, Crowns, Bridges

Precious Alloys Dura-Green Brownie / Greenie Supergreenie

Non-Precious Alloys Dura-GreenHardie-Black (*)

Brownie / GreenieHardie-Brown (*)

Supergreenie

Veneers, Onlays, Inlays, Crowns

Porcelain Dura-Green / Dura-Green Fine

Dura-White

CeraMaster Coarse

Ceramisté Standard /Ceramisté Ultra

SoftCut PA / PB (*)

CeraMaster

Ceramiste Ultra ll

DirectDia Paste

Dura-Polish DIA (*)

Zirconia

Lithium Disilicate

Dura-Green DIA ZiLMaster Coarse /ZiLMaster Medium

ZiLMaster Fine DirectDia PasteDura-Polish DIA (*)

Composites Dura-GreenDura-White

CompoMaster Coarse

CompoSite /CompoSite FineSoftCut PA / PB (*)Dura-Polish (*)

CompoMaster

DirectDia Paste

Dura-Polish DIA (*)

Partial, Full Dentures

Denture Acrylics Lab Carbide (*)

AcryPoint, Dark Grey /Brown (*)

AcryPoint, Light Grey (*)

Dura-Polish (*)


FINISHING & POLISHING SEQUENCE (LABORATORY)

Contouring / Finishing Polishing High-Lustre Polishing

Veneers, Inlays,CrownsPorcelain Dura-Green /

Dura-Green FineDiamond Point Fine HPDura-WhiteChipless Wheels

Fissure Carbide Bur

Ceramiste Standard/Ceramiste Ultra

CeraMaster Coarse

SoftCut PA / PB

Dura-Polish

Ceramiste Ultra ll

CeraMaster

Dura-Polish DIA

Zirconia

Lithium Disilicate

Dura-Green DIA ZiLMaster Coarse /ZiLMaster Medium

ZiLMaster Fine

Dura-Polish DIA

Indirect Composite Dura-Green / Dura-Green FineDiamond Point Fine HPDura-WhiteFissure Carbide Bur

CompoMaster Coarse

SoftCut PA / PBDura-Polish

CompoMaster

Dura-Polish DIA

Inlays, Crowns, BridgesPrecious Alloys

Lab Series Pink Lab Series White

Brownie / Greenie Supergreenie

Dura-Polish

Non-Precious Alloys Lab CarbideLab Series CoralSpruCut Wheel

Cutting DiskHardie-BlackHeatless Wheel

Brownie / Greenie

Hardie-Brown

Supergreenie

Dura-Polish

Partial, Full DenturesCast Partial Dentures Lab Carbide

Lab Series Coral

SpruCut WheelCutting DiskHardie-BlackHeatless Wheel

Brownie / Greenie

Hardie-Brown

Supergreenie

Dura-Polish

Denture Acrylics Lab CarbideAcryPoint, Dark Grey /Brown

AcryPoint, Light GreyDura-Polish

77

Shape Regular Grit

Regular 401M 401 301 301M 201S 201 101S 101 101L 202 202S 103 301CR 202CR

Short 1401 1301 1201 1101 1101L 1202 1103

Super Short 3401 3301 3202

ISO 010 011 016 013 014 016 014 016 018 021 017 022 018 021

Head Length (mm)

3 4 4.5 4 7 7 10 10 10 5 5 9 4 5

Shape Regular Grit

Regular 201CR 101CR 103CR 206CR 207CR 201SR 201R 104R 101R 101SR 102R 103R 105R 106RD

Short 1201R 1104R 1101R 1102R 1103R

Super Short 3201R 3104R 3102R

ISO 018 019 023 027 031 014 016 016 016 013 017 022 022 021

Head Length (mm)

7 10 10 3.5 3.5 7 7 10 10 9 9 9 11.5 9

Shape Regular Grit

Regular 107RD 108R 109R 201Ra 104Ra 101Ra 304 204 104 104L 411 411M 311

Short 1108R 1109R 1204 1104 1411 1311

Super Short 3204 3104

ISO 023 019 021 016 016 016 016 013 016 018 011 010 013

Head Length (mm)

9 8 8 7 10 10 6 8 10 10 4 3 4.5

Shape Regular Grit

Regular 211 214 311RM 212R 213R 114S 114 316 215S 215 216 115 116 421M

Short 1211 1215 1216

Super Short 3215

ISO 014 012 013 010 012 010 012 013 012 014 017 013 015 010

Head Length (mm)

7 5 4.5 6 8 8 8 4 7.5 7.5 7.5 10 10 1


Shape Regular Grit

Regular 461R 462R 364R 265R 165R 144 330 230 130 325 111 246 117 319

Short

Super Short 3461R

ISO 009 011 015 021 025 032 025 043 050 028 045 033 032 017

Head Length (mm) 2 1.7 4.5 5 6.5 5 0.5 0.6 0.7 0.8 1.7 4 5 3

Shape Regular Grit

Regular 421 321M 321 120 421SS 421S 321S 435 335 150 440SS 440S 440 340 340S

Short 1421SS 1421S 1440 1340

Super Short 3421SS 3440SS 3440

ISO 015 016 018 023 010 014 016 013 015 035 010 013 015 018 016

Head Length (mm) 1.5 1.4 1.4 7 2.2 3.5 3.5 1.5 1.7 5.7 0.9 1.2 1.3 1.6 3.5

Shape Regular Grit

Regular 145 148 149 248 121 122

Short

Super Short

ISO 029 032 039 018 026 036

Head Length (mm) 4.9 5 4 7.5 3.6 4

Shape Fine Grit ( Red banded )

Regular F201R F104R F102R F105R F204 F104 F215 F216 F440R F414SS F414S F414

Short F1201R F1204 F1215

Super Short

ISO 015 015 016 021 012 015 013 016 007 010 012 014

Head Length (mm) 7 10 9 11.5 8 10 7.5 7.5 0.7 9 9 9

79

Shape SuperFine Grit ( Yellow banded )

Regular SF416 SF150 SF151 SF440 SF265R SF313R SF145

Short

Super Short

ISO No. 010 035 028 015 020 016 029

Head Length (mm) 4.0 5.7 5.6 1.3 5 3.3 4.9

Shape Coarse Grit ( Green banded )

Regular C101 C202 C102R C104LL C165R C101X C103X C105RX

Short

Super Short

ISO 017 022 018 022 025 017 023 023

Head Length (mm) 10 5 9 10 7 10 10 12


Regular SF201 SF101 SF301CR SF202CR SF201CR SF101CR SF103CR SF206CR SF207CR SF104R SF102R SF102RD

Short SF1104R

Super Short

ISO 015 015 018 021 018 019 023 027 031 015 016 018

Head Length (mm) 7 10 4 5 5 10 10 3.5 3.5 10 9 9


Regular SF106RD SF107RD SF108R SF109R SF201Ra SF206Ra SF204 SF215 SF217 SF114 SF318 SF319 SF219

Short SF1108R SF1109R

Super Short

ISO 021 023 019 021 016 012 010 012 012 013 023 014 019

Head Length (mm) 9 9 8 8 7 7 8 7.5 6 8 2 3.4 5


Shape SuperCoarse Grit ( Black banded )

Regular SC101 SC102R SC104R SC106RD SC201R SC202 SC301 SC111 SC144 SC165R

Short

Super Short

ISO 018 019 018 024 018 023 018 047 034 026

Head Length (mm) 10 9 10 9 7 5 4.5 1.7 5 6.5

Shape GingivoPlasty

Regular G2

Short

Super Short

ISO 022

Head Length (mm)

Shape MI Diamond

Regular MI-IR MI-2R MI-3R MI-IP MI-2P MI-3P MI-F06R MI-F06RL MI-F06P MI-F06PL

Short

Super Short MI-3001R MI-3001P

ISO 009 011 013 008 010 012 006 006 006 006

Head Length (mm) 0.7 0.9 1.1 2 2 2 0.5 0.5 1.9 1.9

81

7. INDIVIDUAL ABRASIVE INFORMATION


HPShank

HPShank

HPShank

PACKAGING PN

BOX 0781

SHOFU Rotary Instruments are available in a wide range of Shapes and shanks depending on the type of handpiece, used by the dentists as well as the dental technician, on a variety of substrates. Complete insertion of these instrumental into the specific handpiece - Straight / Contra Angle / Turbine is recommended to avoid jamming and excessive wear while ensuring precise performance and longetivity of both the handpiece as well as the rotary instruments.

Rotary instruments come in 3 different Shanks :

HP (Straight Handpiece) Shank

A smooth, precise HP shank is attached to the chuck

Of the straight handpiece.

Standard Diameter oh HP shank : 2.35 mm

CA (Contra Angle) Shank

A precisely shaped CA shank fits positively on a CA

Handpiece and is manually locked in place with the

Aid of a groove at the lower end of the shank.

Standard Diameter od CA shank : 2.35 mm

FG (Friction Grip) Shank

A smooth and even FG Shank used in a high speed

Turbine handpiece.

Standard Diameter of FG shank : 1.6 mm

Stainless steel mandrels designed for use with all SHOFU unmounted abrasives

Designed to hold the unmounted polishers for an efficient abrasive action


MANDRELS - HP

ROTARY INSTRUMENTS

MANDRELS - HP

83

Benefits :• Made of high quality silicon carbide grit,

dura green and dura green Fine stones are durable, concentric and have excellent cutting efficiency

• Dura-Green Stones• Precise concentricity with low vibrations• Consistent cutting efficiency• Balance of binder & abrasive particle

ensures durability & optimal cutting ability• Available in a variety of shapes in HP

and CA shanks and selected number of shapes in FG shank

• Dura-Green Fine Stones (yellow band)• Produced with a finer grit size with the

same positive properties as the proven dura green stones

• Available only in HP shank

Indications

Dura-Green Stones - For fast contouring and finishing of porcelain, composite, precious alloys and amalgam restorations

Dura-Green Fine Stones (yellow band) - Created for adding surface characteristics and adjusting details on porcelain and composites


Dura-Green Stones & Dura-Green Stones Fine

PACKAGING QTY PN

HP/CA 12 pcs 0002-0098

FG 12 pcs 0101-0110

HP Fine 12 pcs 011F-048F

HP 72 pcs HG10-HG48


5000 - 20,000 rpm / Max 30,000 rpm

Contact pressure : 3-5 N

DURA GREEN & DURA GREEN FINE STONES


Shape CN1 CN2 CY2 CY3 FL1 FL2 FL3 FL4 FL5 IC1 IC2 IC3ISO No. 024 037 025 028 030 025 030 045 065 030 032 050HP 12 pcs 0002 0006 0007 0009 0010 0011 0012 0013 0014 0015 0016HP 12 pcs* 011FCA 12 pcs 0052 0053 0059 0060 0061 0062 0066FG 12 pcs 0101 0103 0104 0105

Shape IC4 IC5 IC6 IC7 IC8 IC9 KN1 KN3 KN4 KN5 KN7 PC1ISO No. 045 070 065 125 104 135 050 070 080 060 125 030HP 12 pcs 0017 0018 0019 0020 0021 0022 0023 0025 0026 0027 0029 0030HP 12 pcs* 022F 030FCA 12 pcs 0080

Shape PC2 RD1 RD2 RD3 RD4 RE1 RE2 TC1 TC2 TC3 TC4 WH1ISO No. 050 030 024 036 050 062 062 020 025 030 040 040HP 12 pcs 0031 0032 0033 0034 0035 0036 0037 0039 0040 0041 0042 0043HP 12 pcs* 031F 039F 042FCA 12 pcs 0081 0082 0083 0084 0086 0089 0090 0092FG 12 pcs 0107 0108 0109 0110

Shape WH3 WH4 WH5 WH6ISO No. 065 060 065 130HP 12 pcs 0045 0046 0047 0048HP 12 pcs* 045F 048FCA 12 pcs 0095 0096 0098

* Dura-Green Fine (F)

85


5000 - 15,000 rpm / Max 30,000 rpm

Contact pressure : 2 N

Made of High Quality Silicon Carbide Grits.

Indications :

Designed for fast contouring and Finishing of Porcelain and Non-Ceramic precious alloys

Packaging

Individual shapes packed in a box of 12’s

PACKAGING QTY PN

1.6 mm x HP 12 pcs 0150

2.4 mm x HP 12 pcs 0151

3.2 mm x HP 12 pcs 0152


Dura-Green UNMOUNTED WHEELS

Benefits :Durable and Consistent performanceUsed with Shofu HP MandrelsAvailable in 3 different sizes

DURA GREEN UNMOUNTED WHEELS


Dura white stones are vitrified bonded(Micro grained) aluminium oxide abrasives also known as ‘Arkansas’ stones developed for finishing of all types of dental materials.

Benefits :• Perfectly balanced to provide

vibration free performance• Precise concentricity & consistent

performance• Durable with high edge stability• Available in HP/CA/FG shank

Indications :

• Ideal for finishing enamel, glass ionomer cement , composite , porcelain & prepared tooth abutment

Packaging



5000 - 20,000 rpm / Max 30,000 rpm

Contact pressure : 2 N

Shape CN1 CY2 FL1 FL2 FL3 IC4 KN1ISO NO.

024 025 030 025 030 045 050

HP 0201 0202 0203 0204 0205CA 0221 0222 0223 0224FG 0241 0243 0240 0244 0246

Shape RD1 RD2 RE1 TC1 TC4 WH1 WH4ISO NO.

030 024 062 020 040 040 060

HP 0207 0208 0209 0210 0211 0212CA 0227 0228 0229 0230 0232FG 0247 0248 0249 0250

PACKAGING QTY PN

HP/CA/FG 12 pcs 0201-0250


Dura-White Stones

DURA WHITE STONES

87

Shape CY5 FL3 IC5 KN7 RD3 TC2 TC4 WH6

ISO NO. 056 031 070 125 035 025 040 125

HP 0156 0158 0162 0154 0159 0161 0155 0157

CA 0163 0164 0165

Dura-Green DIA is a vitrified-diamond bonded abrasive designed to provide a consistently smooth, chipless cut without leaving any residual contamination.

Benefits :• A dense, well-balanced layering of diamond

particles embedded from surface to core in a special glass binder ensures greater durability and cutting efficiency

• Air holes are optimally distributed in between to minimize clogging

• Low vibrations & minimal heat generations minimize the risk of micro fractures

• Low contact pressure & high edge stability • Available in HP x 8 & CA x 3 , total of 11

shapes

Indications :

• These unique abrasives are indicated for contouring and finishing all types of ceramics including conventional porcelain, alumina, zirconia, lithium disilicate and monolithic zirconia restorations

Packaging :

Individual shapes packed in a box of 2’s (CY5, KN7, WH6) and 3’s (FL3, IC5, RD3, TC2, TC4)

Also available in an assortment of 3 different shapes

HP - CY5, KN7, TC4 (PN 0153)

CA - FL3, RD3, TC2 (PN 0166)


5000 - 20,000 rpm / Max 30,000 rpm

PACKAGING QTY PN

KN7 - HP 2 pcs 0154

TC4, CY5 - HP 3 pcs 0155-0156

WH6 - HP 2 pcs 0157

FL3, RD3 - HP 3 pcs 0158-0159

IC5,TC2 - HP 2 pcs 0161-0162

FL3,RD3,TC2 - CA 3 pcs 0163-0165

CY5,KN7, TC4 - HP 3 pcsAssortment

0153

FL3,RD3,TC2 - CA 3 pcsAssortment

0166


Dura-Green DIA

DURA GREEN DIA


These popular silicone polishers are impregnated with high quality polishing ingredients for fast, brilliant polishing of amalgam, gold and cast alloys.

Benefits :• High gloss polish achieved in 3 coordinated

steps• Brownies, Greenies and Super greenies

are autoclavable or can be disinfected in cold sterilization and doesn’t require any polishing paste or pumice

• Precise concentricity with low vibrations & minimal heat generations

• Fast efficient & durable for consistent performance overtime

• Mini-points are recommended for polishing occlusal surfaces and Cups for proximal and occlusal areas; both available in CA / FG shank

Indications :

• Ideal for chairside & in lab for prepolishing, polishing & high gloss polishing of metallic restorations

• Brownies - for achieving a smooth surface

• Greenies - for a lustrous polish

• Super greenies (with yellow band) - for a final super polish

Packaging :

Individual Shapes Are Packed In A Box Of 12’S


5000 - 7000 rpm


BROWNIE, GREENIE & SUPER GREENIE

PACKAGING QTY PN

Brownie,Greenie,Supergreenie

KN7,PC2,WH6 x HP & CA

12 pcs 0271-0289

Brownie,Greenie Cups,Midipoints,

Discs x CA & FG

12 pcs 0401-0414

Brownie, Greenie, Supergreenie Unmounted Wheels

12 pcs 0453,0454,0454A

Brownie, Greenie Floppie x HP

12 pcs 0458-0459

Super greenie Cup, Midipoint x CA & FG 12 pcs 402A, 412A, 404B, 414B


Brownie, Greenie, Supergreenie

89

Shape Cup Minipoint KN7 PC2 WH6 Floppie Disk Unmounted Wheel

ISO NO. 065 030 125 050 120 220 160 220

Brownie

HP 12 pcs 0271 0272 0273 0458 0453CA 12 pcs 0401 0403 0281 0282 0283 0405FG 12 pcs 0411 0413

Greenie

HP 12 pcs 0274 0275 0276 0459 0454CA 12 pcs 0402 0404 0284 0285 0286 0406FG 12 pcs 0412 0414

SupergreenieHP 12 pcs 0277 0278 0279 454ACA 12 pcs 402A 404B 0287 0288 0289FG 12 pcs 412A 414B

BROWNIE, GREENIE & SUPER GREENIE


Impregnated, autoclavable silicone polishers are perfect for Finishing and Polishing Glass Ionomer and Hybrid composites without scratching or chipping the surrounding enamel.

Benefits :• Eliminates the need of messy polishing

paste• Durable and Long lasting tool life• Available in CA shank and few shapes in

FG

Indications :

• Available in two grits for polishing all types of Resin materials and Glass Ionomers:

• CompoSite Polishers - Aluminium Oxide impregnated Silicone polisher for Finishing and Pre-Polishing

• CompoSite Fine Polishers (white band) - Zirconium dioxide impregnated Silicone polisher for a Lustrous polish

• Cups & Discs - for polishing sub gingival and interproximal surfaces

• Pear point & Midi Points - for Polishing occlusal and Lingual surfaces


• CA Shank 10,000 - 12,000 rpm/ Max 20,000 rpm

• FG Shank 10,00 - 12,00 rpm/ Max 15,000 rpm

• Contact pressure : 0.5 N

Packaging

Individual Shapes Are Packed In A Box Of 12’S

PACKAGING QTY PN

Composite & Composite Fine - CA & FG

12 pcs 0191-0299, 296B


CompoSite & CompoSite Fine

COMPOSITE & COMPOSITE FINE

91

Shape Bullet Knife Wheel Disk Cup Pear-Point IC Midipoint

ISO NO. 040 090 090 160 080 033 090 040CompoSite CA 0191 0192 0193 0194 0195 0196 0197 0198

FG 196B 0199CompoSiteFine

CA 0291 0292 0293 0294 0295 0296 0297 0298FG 296B 0299

COMPOSITE & COMPOSITE FINE


Benefits :• Uniformly blended diamond particles in a resilient

silicone offers precise concentricity and produce remarkable lustre and gloss over the restoration giving it life like aesthetics

• This diamond impregnated silicone polisher is available in two grits:

• CompoMaster Coarse (yellow polisher) - For finishing & basic polishing

• CompoMaster Regular(yellow & white bands) - For superpolishing

• Provides a simple, fast and efficient polishing and super polishing for intra oral, chair side or laboratory use

• Durable and cost effective two-step polishing system, available in HP and CA shank

• Eliminates the need of any messy polishing paste

Diamond impregnated polishers designed with a unique blend and high density of natural diamond particles to provide an exceptionally smooth surface on any composite material.

Indications :

• High end polishing of composite restorations.

Packaging :

• Individual shapes are packed in a box of 3’s

• Unmounted Wheel is available individually with 1pc of mandrel


Mounted Polisher - 5000 - 15,000 rpm/ Max 20,000 rpm

Unmounted Polisher - 5000 - 10,000 rpm/ Max 15,000 rpm

Contact pressure : 0.5 N


CompoMaster Coarse & CompoMaster

PACKAGING QTY PN

Coarse - HP & CA 3 pcs 111C-114C, 116C-119C

Coarse Unmounted Wheel - HP

1 pc 131C

Compomaster - HP & CA

3 pcs 0111-0114, 0116-0119

COMPOMASTER COARSE & COMPOMASTER

93

Shape Bullet Knife Cup Minipoint KN7 WH6 Unmounted Wheel

ISO NO. 040 090 065 030 125 120 220CompoMasterCoarse

HP 116C 119C 117C 118C 131CCA 111C 112C 113C 114C

CompoMaster HP 0116 0119 0117 0118CA 0111 0112 0113 0114

COMPOMASTER COARSE & COMPOMASTER


Shape PC2 WH6 Unmounted Wheel

ISO NO. 050 120 220SoftCut PA HP 0564 0595SoftCut PB HP 0563 0565 0596

Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.

Benefits :• Recommended for polishing porcelain

surfaces prior to glazing to lower the firing temperature and enhance aesthetics

• Fine finishing & polishing in just one step• Lighter the pressure higher the gloss• Uniform concentricity for minimal

vibration• Low heat generation minimizes risk of

porcelain micro fracture

Indications :

• Soft Cut has been specially created for contouring & polishing porcelain and indirect composite restorations

• Available in 2 polishing grits:

• PA grit (green band) - for fine finishing & smoothening after finishing with Dura-Green Stones

• PB grit (blue band) - for polishing after fine finishing

Packaging :



Mounted Polisher - 5000 - 20,000 rpm/ Max 20,000 rpm

Unmounted Polisher - 5000 - 15,000 rpm/ Max 15,000 rpm


PACKAGING QTY PN

PA/PB - HP x PC2,WH6, 12 pcs 0563-0565

PA/PB - HP x Unmounted whe

12 pcs 0595-0596


SoftCut Polishers

PA PB

SOFT CUT

95

Shape Bullet Cup Knife Wheel Midipoint KN7 PC2 WH6 Unmounted Wheel

ISO NO. 040 065 090 090 060 125 050 120 220Standard(prepolish)

HP 0261 0262 0263 0451CA 0251 251A 0252 0253 253AFG 251B 253B

Ultra(polish)

HP 0264 0265 0266 0452CA 0254 254A 0255 0256 256AFG 254B 256B

Ultra II(superpolish)

HP 0267 0268 0269 452ACA 0257 257A 0258 0259 259AFG 257B 259B

Impregnated with silicon carbide in high grade silicone,Ceramiste polisher is designed for polishing porcelain & enamel to achieve a glazed-like polish.

Benefits :• Low contact pressure, less heat generation• Uniform concentricity• Autoclavable & durable• Cups and Midi-Points available (CA & FG

shank only)• All other shapes (HP, CA shank & Unmounted

Wheels)

Indications :

• Designed to achieve a glazed like polish on porcelain & enamel

• Standard Polishers - for pre-polishing

• Ultra (yellow band) - for polishing

• Ultra II (white band) - for super polishing to a glazed-like surface

Packaging



10,000 - 12,000 rpm/ Max FG Shank 20,000 rpm

Max HP/CA Shank 15,000 rpm


PACKAGING QTY PN

HP x KN7,PC2,WH6 CA x Bullet,Knife,Wheel

12 pcs 0251-0269

CA x Cup,Midipoint 12 pcs 0351A-0259A

FG x Cup,Midipoint 12 pcs 0253B-0259B

Unmounted Wheel 12 pcs 0451,0452,0452A

CERAMISTE

Ordering Information :Ceramiste Polishers


Benefits :• Produces High Gloss because

of the Precise Concentricity with uniform distribution of even sized diamond particles in a resilient silicone compound

• This Unique Formulation ensures efficient performance with low vibration and minimal heat generation reducing the risk of Micro Cracks

Indications :

Three step polishing system specifically designed for all-ceramic restorations including Lithium disilicate and fully contoured Zirconia restorations

• ZiLMaster Coarse (green banded shank) - For finishing and pre-polishing.

• ZiLMaster Medium (blue banded shank) - For polishing.

• ZiLMaster Fine (yellow banded shank) - For super polishing

Packaging

ZilMaster CA Assorted Kit : Assorted Coarse x 4 (Bullet, Knife, Cup & Minipoint)Assorted Medium x 4 (Bullet, Knife, Cup & Minipoint)Assorted Fine x 4 (Bullet, Knife, Cup & Minipoint )

ZilMaster HP Assorted Kit :Assorted Coarse x 4 (Bullet, KN7, WH6 & Minipoint)Assorted Medium x 4 (Bullet, KN7, WH6 & Minipoint)Assorted Fine x 4 (Bullet, Knife, Cup & Minipoint)

Recommended Speed Range : Mounted Polisher - 10,000 - 15,000 rpm/ Max 20,000 rpmUnmounted Polisher - 5000 - 10,000 rpm/ Max 15,000 rpm

Contact pressure : 1.5 N

PACKAGING QTY PN

Coarse, Medium Fine - HP & CA x Bullet,Knife,Cup,Minipoint,

KN7, WH6

3 pcs 0640-0643,0646-0649,0652-0655,0658-0673

Coarse, Medium Fine xUnmounted wheel

1 pc 0645,0651, 0657

Coarse, Medium, Fine - HPBullet, KN7, WH6, Minipoint

4 pcsAssortment

0644, 0650,0656

Coarse, Medium, Fine - CABullet, Knife, Cup, Minipoint

4 pcsAssortment

0664, 0669, 0674


ZilMaster

ZILMASTER

97

Shape Bullet Knife Cup Minipoint KN7 WH6 Unmounted Wheel

ISO NO. 040 090 065 030 125 120 170ZiLMasterCoarse

HP 3 pcs 0640 0641 0642 0643HP 1 pcs 0645CA 3pcs 0658 0662 0663 0661

ZiLMaster Medium

HP 3 pcs 0646 0647 0648 0649HP 1 pcs 0651CA 3 pcs 0665 0659 0668 0666

ZiLMasterFine

HP 3 pcs 0652 0653 0654 0655HP 1 pcs 0657CA 3 pcs 0670 0672 0673 0671

ZILMASTER


Specially designed Carbide burs in HP & FG Shank with unique Triganol Pyramid shaped tip or perfect pointed end.

Benefits :• Special three Blade Tip Design is highly

abrasive with Superior cutting efficiency for Precise replication of intricate surface details

• Made of High grade Tungsten Carbide for remarkable Durability

• Fissure Carbide in FG Shank used with lab Air Z is preferred by Ceramists for Anatomical Carving

• Fissure Carbide in HP Shank is used for carving of Indirect Composites (eg.Ceramage) as well as acrylic dentures

Indications :

• Anatomic carving of Pit and Fissure

• Minor adjustment of interproximal areas of ridges fabricated with porcelain, Indirect Composite, Hard resin, Denture Base Acrylic and range of dental alloys

• Trimming of interdental papilla of dentures

Packaging

Individually packed in box of 6’s (HP)

Individually packed in box of 3’s (FG)


Fissure Carbide Burs

PACKAGING PN

HP 5945

FG 5946

FISSURE CARBIDE BURS HP/FG

99

8. MISCELLANEOUS


PACKAGING PN

One Block 0504

Benefits :• Easy to adjust shape just by pressing the rotating

Dura Green Dia against the entire surface of the Shofu Adjuster

• Desinged to be held in the box for added safety during use.

Indications :

Used to adjust the shape of Dura Green Dia Abrasive

Packaging

Individually packed


Shofu Adjuster

The Bur Station II is an ideal bur stand for the storage of contra angle (CA) and friction grip (FG) instruments.

Benefits :

• The organisers are handy and aid easy transportation of upto 12 FG and 6 CA instruments

• Depending on the indication, various individual sets can be assembled

• Can be Disinfected and Sterilised in an Autoclave

• Made from multi functional resin, and offers a high thermal resistance (< 140 °C), thus being very durable and resistant to chemicals

Indications :

The Bur Station II for storage and sterilisation of up to 17 instruments (11x FG and 6 x CA )

Packaging

Available in two Colors, Blue & Yellow

PACKAGING PN

Blue 0797

Yellow 0796

BUR STATION II


Bur Station II

SHOFU ADJUSTER

101

Benefits : • Multiple layers natural diamond particles

are electrocoated on the dresser that assures durability and prevents clogging to maintain cutting efficiency.

Indications :

• A diamond-coated instrument specially designed for easy cleaning and precise reshaping of all abrasive stones and polishers.

Packaging

Individually packed


Diamond Dresser

PACKAGING PN

One Piece 0781

Benefits :• Precisely clustered Fine Bristles provides

Universal Application and allows to produce accurate details thus Individualizing the Restoration.

• Available in 2 different Bristle Sizes

Indications :

• Easy Application of Direct & Indirect Composites

• Creating Individual Characterizations with Opaquer and Tints

Packaging

No 4, Box of 10 with Handle

No 5, Box of 10 with Handle


UNI BRUSH II

NYLON BRISTLED BRUSHES FOR DETAILING COMPOSITE RESTORATIONS

PACKAGING PN

NO.4 1586

NO.5 1988

UNI BRUSH

DIAMOND DRESSER

CLINICAL PRODUCT CATALOGUE - Shofu Dental India · 2020. 3. 2. · 10 • SHOFU Dental India...

Documents

Transcript of CLINICAL PRODUCT CATALOGUE - Shofu Dental India · 2020. 3. 2. · 10 • SHOFU Dental India...