Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview...
Transcript of Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview...
![Page 1: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/1.jpg)
1
Clini-Counter
User Instructions
![Page 2: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/2.jpg)
2
Clini-Counter User Manual IndexOverview.....................................................................................................Page 3Normal Run Or Calibration Mode...............................................................Page 4Kick / Pause Mode.....................................................................................Page 5Set Dwell Time............................................................................................Page 6Calibration Mode / Variable Batch............................................................Page 7QA Request.................................................................................................Page 8Maintenance Mode.....................................................................................Page 9Specifications..............................................................................................Page 11CE Certificate...............................................................................................Page 12
![Page 3: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/3.jpg)
3
OverviewThe 'Clini-Counter' has been designed to be used within the Print and Packagingindustry for leaflet & carton batch counting.
The main unit houses the controls, operator touch screen interface and connections forsensing and batching devices.
Front Panel Layout.
In order for the unit to count, a sensor is connected to the unit via a 5 pin socket onthe rear. Each time the sensor changes from off to on state, an increment of 1 isregistered.
There are two ways in which the unit interacts with the product being counted.
1. The passing product is kicked by a batching device which shows a specifiedcount mark point.
2. The feed of the machine is interrupted which creates a visual gap betweendefined batch quantities.
The red LED on the panel front indicates the presence of a product.
The HOME button will return the menu to the previous screen.
![Page 4: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/4.jpg)
4
Normal Run Or Calibration Mode
Touch Run Mode Button
Select which mode you require to run in, either Normal Run Mode or Calibration Mode(see page 5 for calibration mode settings).
After selecting Normal Run Mode the following screen will re-appear to confirm youare in Normal Run Mode.
You can then select which takes you to display option screen whichallows the user to select the screen view during running.
![Page 5: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/5.jpg)
5
Kick / Pause ModeTo change between Kick or Pause, select Kick / Pause.
Selecting Kick or Pause will them return to main screen after the mode has changed.
![Page 6: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/6.jpg)
6
Set Dwell TimeTo alter the time delay in pause mode select Set Dwell Time.
To change, touch value and enter on the screen as below and press ENT to verify orESC to return to previous menu.
Setting the dwell time will change how long the interrupt pause lasts but it will alsochange how long any kicker will hold the 'kicked' position for.
![Page 7: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/7.jpg)
7
Calibration Mode / Variable Batch
Select Calibration Mode and the following screen will appear.
This screen allows the user to set 3 counts in different batch quantities.
Batch 1 will run then move on to Batch 2 & 3 and then return to batch 1 in a loopmode. This allows the operator to manually verify the counter is counting andbatching accurately.
Here the values can be adjusted and entered.ENT will confirm value, ESC will return to previous screen.
![Page 8: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/8.jpg)
8
QA RequestQA Request allows the user to ‘kick’ a QA sample whilst maintaining an accuratebatch and total count.
Select QA Request
Selecting NO will return to the previous screen.
Selecting YES will kick a leaflet and adjust the counts.
There are no limits to how many QA Requests you can obtain. If the machine is notrunning when a request is made, the next product through will activate the request.
CAL SetupSelecting this will enter Calibration Mode (see page 7)
![Page 9: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/9.jpg)
9
Maintenance Mode
Maintenance Mode allows the user to select one of the following three options:
Service Setup / Cal Setup / QA Request
Service Setup
This mode allows an engineer to set machine maintenance counts, i.e if the machineneeds routine maintenance after 10 million leaflets the count can be set to this andonce the count is reached, a message will be displayed on the screen to alertmaintenance is required.
![Page 10: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/10.jpg)
10
To change the Set Count you will need to select Password.
Enter Password as and press ENT.
Now touch the value on the Set Count
Enter value the usual way and press ENT.
![Page 11: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/11.jpg)
11
Specifications
Interrupt Feed Wiring
The unit is supplied with a pre-wired four-core machine interrupt lead. The cores arenumbered 1 to 3 with the fourth core being ground.
Supply Voltage 110 - 240Vac 50-60 Hz
Current 300mA
Weight 3.4KG
Min Input Pulse 7mS
Min Output Pulse 20mS
Dimensions (W x D x H) mm 305 x 280 x 88
Core Number Description
1 Common
2 Normally Closed Contact
3 Normally Open Contact
![Page 12: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/12.jpg)
12
CE Certificate
![Page 13: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/13.jpg)
Clini-Reflective
A Clini-Reflective sensor can be used to just
count or in conjunction with a pecker it can
be used to batch count over distances.
Typical uses are when utilising a shingle
delivery. This sensor counts on top of the
work for when space is very limited.
Clini-Counter Accessories
Clini-Combi Kicker
A Clini-Combi Kicker unit is a combined
sensor and kicker which is particularly
good where space is limited or the batch
count mark needs to be very accurate in
position.
Clini-Sensor
A Clini-Sensor can be used to just count or
in conjunction with a pecker can be used
to batch count over distances. Typical uses
are when utilising a shingle delivery.
Clini-Pecker
A Clini-Pecker is used in conjunction with a
Clini-Sensor to show a defined batch mark
typically on shingle deliveries. The Clini-
Pecker can also be adapted to use a pen to
create a mark on continuous work.
![Page 14: Clini-Counter User Instructions - Clinical Print Finishers (UK) Ltd · 2018-01-15 · 3 Overview The 'Clini-Counter' has been designed to be used within the Print and Packaging industry](https://reader034.fdocuments.us/reader034/viewer/2022042406/5f206a707d23952f6a727304/html5/thumbnails/14.jpg)
Clini-Counter Prices 2017
ALL counters and accessories are compatible with the Danelec CounterSystems.
Prices are based on a one off price and are subject to shipping andhandling + VAT at applicable rate.
Item £ Each
Clini-Counter £1275
Combi-Kicker £370
Sensor £240
Kicker £270
Woodpecker £260
Sensor Mounts £25
Mounting Kit £40
Reflective Sensor £240
Large Format Display £400
Tel: 0116 2620050
All prices are subject to setting up an approved credit account.
All returned items once inspected are subject to a 25% re-stocking fee,shipping will not be refunded.
ALL RETURNS MUST BE BY AGREEMENT & WITHIN 28 DAYS OFPURCHASE. GOODS TO BE IN AN UNUSED CONDITION.